Replace the equality operator '==' with '=' inside of '[]' to be
compatible with bash and dash.
(From OE-Core rev: 5fe58dbfbc42aa105a6be6444878f0c0588cb4d5)
Signed-off-by: Fedor Ross <fedor.ross@ifm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit b7f0ec6eafb35117eaf4eeef281162080f0ca79a)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
psplash expects the fifo to be in /run or specified
by PSPLASH_FIFO_DIR. This patch allows psplash to
quit normally. Also, fix the work around of using
echo directly into the fifo and use psplash-write.
(From OE-Core rev: 0f395ab9d276595e75233dbdbb9ebb610bd1d3af)
Signed-off-by: Michael Gloff <mgloff@emacinc.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 2b48bbd0a8de17df74d1fae12b5e4eb3c2c0fb90)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The VERSION variable is not set unless the
top level Makefile is used as the version is
derived from the Changelog.
If VERSION is not set, none of the binaries built
in the sysvinit recipe will have a valid version
output.
Before:
INIT: version booting
After:
INIT: version 2.96 booting
Using the top level Makefile does not cause any
additional builds to occur.
(From OE-Core rev: c8ad554db100b9fd16097fc8616b2af5390772e7)
Signed-off-by: Michael Gloff <mgloff@emacinc.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 10992ad4f343d0f92d9d6246cc2e58effd3f3eeb)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
logsave is a duplicate from e2fsprogs, which was already removed,
but the man page remained which is also a duplicate. However it
does not get modifed on install so it conflicts with the e2fsprogs
version.
(From OE-Core rev: 90ee5557c0e1d7088b5d9b7e66d70ff7fccac9a3)
Signed-off-by: Jeremy A. Puhlman <jpuhlman@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is possible for sysvinit to be installed before the passwd/group
files are installed from base-passwd. This results in an warning that
the shutdown group can't be found.
Adding a dependeny on base-passwd will resolve this issue.
This has similar symptoms to the problem that oe-core commit
0227e929021263c51d2e7db36224000fecb01f1c fixed. The fix is simular in that
it ensures that base-passwd is installed first, just at runtime vs setscene
time.
(From OE-Core rev: c4fb899b19a905a2b027f33947b6ec56f55b81a6)
Signed-off-by: Mark Hatle <mark.hatle@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With a sequence like:
bitbake sysvinit
bitbake sysvinit -c clean
bitbake sysvinit -c package_write_ipk -f
then the resulting package has two files with group "root/70" rather
than "root/shutdown". The issue is that of do_package is a setscene
task, base-passwd isn't present. This patch fixes that dependency
but there may be other cases of this problem around.
[YOCTO #13776]
(From OE-Core rev: 0227e929021263c51d2e7db36224000fecb01f1c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove 0001-This-fixes-an-issue-that-clang-reports-about-mutlipl.patch,
the problem has been fixed upstream.
Rebase the other patches.
License-Update: copyright years
(From OE-Core rev: 5372e1acdd68367e64d13e19d1beb2d7b3e3c224)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Besides checking DISTRO_FEATURES for required or conflicting features,
being able to check MACHINE_FEATURES and/or COMBINED_FEATURES may also
be useful at times.
Temporarily support the old class name with a warning about future
deprecation.
(From OE-Core rev: 5f4875b950ce199e91f99c8e945a0c709166dc14)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes musl issue
implicit declaration of function 'minor' is invalid in C99 [-Wimplicit-function-declaration]
which eventually ends up with a linker error
(From OE-Core rev: 6b603924e50a5694421b9142494315799422928d)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
when both installed, do_rootfs report error like:
file /etc/inittab conflicts between attempted installs of
busybox-inittab-1.30.1-r0.qemux86 and sysvinit-inittab-2.88dsf-r10.qemux86
so add each other to rconflicts
(From OE-Core rev: d66114b07ef3e8482fee4c3c93e4f6324c38da3b)
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Busybox' getty has code to try to make itself a session leader,
whereas util-linux' agetty doesn't. It expects this to happen
from outside.
When getty is not a session leader, many things don't work on
the serial console, e.g. setting the terminal process group,
job control doesn't work, etc.
Executing image tests also fails with AssertionErrors, because
Feb 5 16:12:55 qemuarm getty[590]: /dev/ttyAMA1: cannot get controlling tty: Operation not permitted
Feb 5 16:12:55 qemuarm getty[590]: /dev/ttyAMA1: cannot set process group: Inappropriate ioctl for device
Update the start_getty script to invoke getty via the setsid
utility if needed, i.e. if /sbin/getty is not busybox getty.
[YOCTO #13058]
(From OE-Core rev: 37be77565d323fc543427ad47399996119f59ab1)
Signed-off-by: André Draszik <andre.draszik@jci.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rationale - excerp from `info chown`
====================================
OWNER‘:’GROUP
If the OWNER is followed by a colon and a GROUP (a group name or
numeric group ID), with no spaces between them, the group ownership
of the files is changed as well (to GROUP).
Some older scripts may still use ‘.’ in place of the ‘:’ separator.
POSIX 1003.1-2001 (*note Standards conformance::) does not require
support for that, but for backward compatibility GNU ‘chown’ supports
‘.’ so long as no ambiguity results. New scripts should avoid the use
of ‘.’ because it is not portable, and because it has undesirable
results if the entire OWNER‘.’GROUP happens to identify a user whose
name contains ‘.’.
(From OE-Core rev: 185918234a07cb506d7d7464a49ac33972c7d963)
Signed-off-by: Kosta Zertsekel <zertsekel@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead, first check if we need to do anything at all during first boot,
and if so, either postpone to first boot via pkg_postinst_ontarget()
when running on host, or run the necessary setup code when running on target.
(From OE-Core rev: 16df1717c3813ba773e0dfa2d1db471816d8b99b)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use distro_features_check so that we can have a uniform controller.
(From OE-Core rev: 658c59c90092f15c026fa3c72399f481c7241f65)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Stop using update-alternatives for managing /etc/init.d/functions. Also,
make the initscripts-functions subpackage to (runtime) conflict with
lsbinitscripts.
[YOCTO #10944]
(From OE-Core rev: cdcebd81c872cb7386c658998e27cf24e1d0447c)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Unbreak serial console when driver name contains spaces (PXA serial).
Fix commit ac0e954
"start_getty: Over added SERIAL_CONSOLE cause error in userspace log"
(From OE-Core rev: 8b98302c30efb7073f61dc2a166f7414f050ef65)
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Error log will be logged into /var/log/message.
Added in more condition checking on the script. Check
/proc/tty/drivers and /proc/tty/driver/*
file system to retrieve active targeted serial.
Only establish getty with active serial in runtime.
[YOCTO #10844]
Reviewed-by: Saul Wold <sgw@linux.intel.com>
(From OE-Core rev: ac0e9541fe93e866e42914f65a0516b993f0cffe)
Signed-off-by: Choong YinThong <yin.thong.choong@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
getty devices were not being removed in some cases because device name
was not at the end of the line, for example a ttyS1 device:
S1:12345:respawn:/bin/start_getty 115200 ttyS1 vt102
Removing this limitation allows sed to remove any line containing
the device.
(From OE-Core rev: 2e0b36981c1f91ed0d3d457c370df10a099407af)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This makes more sense than the default TERM=linux (as set
by the linux kernel).
In addition, when using busybox init, it tries to achieve
the same (in a different way).
Both agetty, and busybox getty support the terminal type as
the last argument.
(From OE-Core rev: a23004f32dda9310c7efc29720fa9c3027a7c329)
Signed-off-by: André Draszik <adraszik@tycoint.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With some hardware the name of the device node and the name in
/proc/console differ. This causes SERIAL_CONSOLES_CHECK to not enable
working consoles in these cases. This patch changes SERIAL_CONSOLES_CHECK
to have an optional alias for the checked consoles. The new format is:
<device>:<alias to check(optional)>
Fixes [YOCTO #9440].
(From OE-Core rev: 91d9f3271c12fb755ab332637b17650d5fe75ce2)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current recipe creates inittab labels based off the device node name
of TTYs used as consoles. If those names exceed the 4 character label
limit of inittab, it will break. This change takes the last 4 chars of
the device names in order to avoid any errors.
[ YOCTO #9529 ]
(From OE-Core rev: 30acc7a6b9e6d1c42ba1df6e5a362d10b43cb4eb)
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
util-linux has an alternative for it. Add it to sysvinit too.
(From OE-Core rev: 43069c2bd9947357970bd48504987bda514f5219)
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
sysvinit is objectively less maintained than util-linux or busybox, each
of which may supply its own mountpoint implementation. Adjust the
ALTERNATIVE_PRIORITY to select the sysvinit implementation as the last
resort.
(From OE-Core rev: 92c6b896e3b11283e2c313e6a2ac3497a99a13a0)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When this file is in ${sysconfdir}/init.d, SELinux labels it as a generic
init script (initrc_t). This causes problms at runtime because SELinux
doesn't let the login process execute generic init script. Moving this
helper script to base_bindir results in it being labeled as a generic
binary (bin_t). Nearly every SELinux domain is allowed to execute
generic binaries and the login process is one of them.
(From OE-Core rev: 826bfea4b7018c7974ef388facc99ca70bb3654f)
Signed-off-by: Philip Tricca <flihp@twobit.us>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a wrapper script around getty to check if a given console exists, this
allows for multiple Console ttys to be specified for various boards without
having additional BSP types just for different console types.
[YOCTO #8689]
(From OE-Core rev: b93369a7943949f51057e0a704f5524ab7682fe6)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is due to specifying .h files on linker cmdline
clang driver is picky about it, and its not entirely correct
either
(From OE-Core rev: de45b5e68faeefe3d68818d456f280b98f397634)
(From OE-Core rev: 44dcee60e343944199ee766ec0886931ff2b0699)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On qemuarm64 the second serial port in SERIAL_CONSOLES will be hvc0.
Since that doesn't have tty in the name, a correct label didn't get
added to inittab.
This change makes both names with tty and without work.
(From OE-Core rev: 4cca92b34defae425929d92671edde621f8a5e80)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Similarly to systemd, only enable the recipe in builds where
sysvinit is configured in DISTRO_FEATURES. This allows the new
cleanup mechanism to handle it correctly in existing builds.
(From OE-Core rev: 7f85e74d5c53b34e5f470967fdbdbd19fed1929a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
SysVinit creates lastb as a symlink to last during the build.
Just as other applications may provide last, other applications
may provide lastb.
Add alternatives designations for lastb to avoid installation
conflicts with other applications.
(From OE-Core rev: c76270e55cf6db6c757690f4b8df8c95924bdcd7)
Signed-off-by: Bryan Evenson <bevenson@melinkcorp.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When switch to runlevel 1 (Single user mode), tty was not
re-spawn and appears to be a machine hang.
[YOCTO #5336]
(From OE-Core rev: f7c270d073d6f0d1e741e9850c599074ebe79db7)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After removal of auto-creating S we must ensure that all recipes are
using a proper value for S.
Fix all recipes that only need to set S equals to WORKDIR.
[YOCTO #5627]
(From OE-Core rev: 9d220b1bfe4589736604dd5a7129e3699377d830)
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This aligns the params of getty with the ones used in Debian. From the
getty(8) manpage:
,----[ getty(8) manpage ]
| -L, --local-line
|
| Force the line to be a local line with no need for carrier
| detect. This can be useful when you have a locally attached
| terminal where the serial line does not set the carrier detect
| signal.
`----
Reported-by: Craig McQueen <craig.mcqueen@beamcommunications.com>
(From OE-Core rev: a899c362be71cb7b94bd318c57702446b017005c)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Tested-by: Craig McQueen <craig.mcqueen@beamcommunications.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For certain swap/overcommit settings (e.g. when overcommit is disabled
on a real-time system), we need to limit the stack size used by
initscripts. When the STACK_SIZE environment variable is set (usually
in /etc/default/rcS), ulimit the stack size to the value specified.
Make the stack size ulimit a soft limit, which allows the user to
increase the stack size where required without having to run the
respective application as root.
(From OE-Core rev: 0b5db16929de7668174e74e428f3e4e90e76e1d8)
Signed-off-by: Scot Salmon <scot.salmon@ni.com>
Signed-off-by: Gratian Crisan <gratian.crisan@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Acked-by: Rich Tollerton <rich.tollerton@ni.com>
Acked-by: Brad Mouring <brad.mouring@ni.com>
Acked-by: Bill Pittman <bill.pittman@ni.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bootlogd does not write to /var/log/boot if it does not exist,
so if using the volatiles facility (presumed to mount /var/log under a
tmpfs), ensure that /var/log/boot gets created.
(From OE-Core rev: 283d109098358c06ff10daaf612e5a244691d7ac)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bootlogd's default log rotation code on stop requires `savelog`, which
is in debianutils, which may not be installed. If it's not installed,
don't try to perform the log rotation.
That is: in the affected code block, `savelog` is what is responsible
for creating "boot.0". When `savelog` doesn't exist, an error message
gets printed on bootup to the effect of "mv: can't find boot.0".
(From OE-Core rev: 5c22973e1bf76615bcf57984ac7a30cf7d0766df)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The messages echoed when starting and stopping bootlogd are currently
printed regardless of the setting of VERBOSE. Adjust the initscript so
they're only printed when VERBOSE is enabled.
(From OE-Core rev: 42f107513148aa6e9fd69d51e63a183c613114c0)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* The SRC_URI is not accessible.
So need to add mirror site referred by the original site.
* The problem is that
http://download.savannah.gnu.org/releases redirects to closest mirror
and few mirrors (e.g. .jp) weren't working correctly while
http://download-mirror.savannah.gnu.org/releases/ seems to be reliable.
* Add SAVANNAH_GNU_MIRROR and SAVANNAH_NONGNU_MIRROR variable in bitbake.conf.
* Change the SRC_URI using the new variable.
(From OE-Core rev: af00b6544f60e4d7581f9d9767f9d3f574392359)
Signed-off-by: Changhyeok Bae <changhyeok.bae@lge.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Resolves warnings of this kind in the OpenPLi layer:
WARNING: Use of PRINC * was detected in the recipe *
(From OE-Core rev: 5ffb38d6ace7faae839c8cac7327b5b1c2daae1a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
fix the bootlogd init script header, to make chkconfig be able to work
on bootlogd
(From OE-Core rev: d1a7e5dbaa1217b692b46e2756c318e5aaa34f9d)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* resolves following warnings:
WARNING: Use of PRINC 17 was detected in the recipe meta-openembedded/meta-systemd/recipes-core/systemd/systemd-machine-units_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-gpe/recipes-support/fbreader/fbreader_0.12.10.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-gpe/recipes-support/fbreader/fbreader_git.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-multimedia/recipes-multimedia/sox/sox_14.4.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-oe/recipes-multimedia/mplayer/mplayer-common.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-smartphone/meta-android/recipes-bsp/chroot-script/chroot-script_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-connectivity/avahi/avahi-ui_0.6.31.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-connectivity/bind/bind_9.8.1.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-core/systemd/systemd-serialgetty.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-core/sysvinit/sysvinit-inittab_2.88dsf.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-extended/screen/screen_4.0.3.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-extended/shadow/shadow-securetty_4.1.4.3.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-extended/shadow/shadow_4.1.4.3.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-graphics/libsdl/libsdl_1.2.15.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-graphics/packagegroups/packagegroup-core-x11-xserver.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-kernel/modutils-initscripts/modutils-initscripts.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-multimedia/libsndfile/libsndfile1_1.0.25.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-support/libcap/libcap_2.22.bb (or one of its .bbappends)
WARNING: Use of PRINC 11 was detected in the recipe openembedded-core/meta/recipes-bsp/keymaps/keymaps_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 11 was detected in the recipe openembedded-core/meta/recipes-core/systemd/systemd-compat-units.bb (or one of its .bbappends)
WARNING: Use of PRINC 12 was detected in the recipe openembedded-core/meta/recipes-core/initscripts/initscripts_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 13 was detected in the recipe openembedded-core/meta/recipes-core/base-files/base-files_3.0.14.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe meta-openembedded/meta-oe/recipes-navigation/navit/navit_svn.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe meta-openembedded/meta-oe/recipes-support/lvm2/lvm2_2.02.97.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe openembedded-core/meta/recipes-connectivity/portmap/portmap_6.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe openembedded-core/meta/recipes-extended/pam/libpam_1.1.6.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe openembedded-core/meta/recipes-graphics/packagegroups/packagegroup-core-x11.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe meta-openembedded/meta-efl/recipes-efl/efl/entrance_svn.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe meta-openembedded/meta-oe/recipes-multimedia/mplayer/mplayer2_git.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-bsp/formfactor/formfactor_0.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-connectivity/avahi/avahi_0.6.31.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-connectivity/dhcp/dhcp_4.2.5-P1.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-core/init-ifupdown/init-ifupdown_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-graphics/xinput-calibrator/pointercal-xinput_0.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 5 was detected in the recipe meta-openembedded/meta-oe/recipes-core/meta/distro-feed-configs.bb (or one of its .bbappends)
WARNING: Use of PRINC 5 was detected in the recipe openembedded-core/meta/recipes-connectivity/bluez/bluez4_4.101.bb (or one of its .bbappends)
WARNING: Use of PRINC 6 was detected in the recipe openembedded-core/meta/recipes-core/packagegroups/packagegroup-base.bb (or one of its .bbappends)
WARNING: Use of PRINC 6 was detected in the recipe openembedded-core/meta/recipes-core/packagegroups/packagegroup-core-boot.bb (or one of its .bbappends)
WARNING: Use of PRINC 6 was detected in the recipe openembedded-core/meta/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bb (or one of its .bbappends)
WARNING: Use of PRINC 7 was detected in the recipe meta-openembedded/meta-oe/recipes-navigation/gpsd/gpsd_3.7.bb (or one of its .bbappends)
WARNING: Use of PRINC 7 was detected in the recipe openembedded-core/meta/recipes-core/udev/udev-extraconf_1.0.bb (or one of its .bbappends)
(From OE-Core rev: c6825ec6e92e20bb64a051d1576f363c16e98d68)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As sysvinit doesn't inherit update-rc.d, we need to add this dependency
manually.
(From OE-Core rev: 4ea9ca2bbacb20c3ed454b80e2c020c1073f3299)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of manually adding initscripts to RDEPENDS of each package,
we should make it automatically handled by the update-rc.d.bbclass.
This solution would have the benefit of backward compatibility. In
other words, users need not modify their recipes.
This reverts commit 16080a3485.
(From OE-Core rev: f9f193219bd510160b6b09bae652a9dc8ea01e7b)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that the initscripts-functions has been packaged separately,
packages which may use the functions script should have a runtime
dependency on it.
(From OE-Core rev: 6690c12cb1977f6bf93f3eb6d471dbd7db81bf28)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A lot of our recipes had short one-line DESCRIPTION values and no
SUMMARY value set. In this case it's much better to just set SUMMARY
since DESCRIPTION is defaulted from SUMMARY anyway and then the SUMMARY
is at least useful. I also took the opportunity to fix up a lot of the
new SUMMARY values, making them concisely explain the function of the
recipe / package where possible.
(From OE-Core rev: b8feee3cf21f70ba4ec3b822d2f596d4fc02a292)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
