10 log lines may not capture any full traceback, increase the number of
lines to 60 which covers most tracebacks.
(Bitbake rev: 340a7d91b5030e4d62680f427286fc419509879b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #12898]
There might be no bitbake-cookerdaemon.log, print a message for debugging.
(Bitbake rev: cc32e703a8e68107353702edb230296503f5dad0)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This simplifies the code and makes it easier to read but has the
same functionality.
(Bitbake rev: 21dcec291d58ab7ac5d2c07186c68e01d85e6f65)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
| error: create archive failed on file /media/build1/poky/build/tmp/work/all-poky-linux/xcursor-transparent-theme/0.1.1+gitAUTOINC+23c8af5ba4-r0/deploy-sources/allarch-poky-linux/xcursor-transparent-theme-0.1.1+gitAUTOINC+23c8af5ba4-r0/xcursor-transparent-theme-0.1.1+git0+23c8af5ba4-r0.src.rpm: cpio: read failed - No such file or directory
| Building target platforms: noarch-poky-linux
| Building for target noarch-poky-linux
This is caused by:
$ cat log.task_order
do_cleansstate (24289): log.do_cleansstate.24289
do_deploy_archives_setscene (24395): log.do_deploy_archives_setscene.24395
do_fetch (24407): log.do_fetch.24407
[..]
do_package_write_rpm (25448): log.do_package_write_rpm.25448
do_package_qa (25451): log.do_package_qa.25451
So do_deploy_archives can run from sstate, created a .src.rpm in WORKDIR/deploy-sources,
then it was removed when rpm was running. This leads to a broken Source line in the
spec file as the original file was found by the os.listdir().
This fix is just a bandaid over much more fundamental problems sadly.
(From OE-Core rev: a10020ace4c3cd863c782760f7cbecea557ec6e7)
(From OE-Core rev: 6d56e912fbbaa22830b4da5ab230586a3d15b23e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The package_rpm code is writing outside the task's sstate directory into
the sstate of do_deploy_archives. This is "out of spec" since if the
task is installed from sstate, the files are not restored. This means
the files may appear/disappear, things are not deterministic and there are
races.
Extend the do_package_write_rpm code to handle writing the src.rpm into
place to avoid these issues. There are other problems but this avoids races
around this file.
(From OE-Core rev: c6e151ba7fe0f14044537cf0ab2cac436f1496e3)
(From OE-Core rev: b119872fb794a36b6eb9ef5e9c42a9c6c991e835)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On a system without ccache, f you:
INHERIT += "ccache"
bitbake libtool-cross
<remove INHERIT>
bitbake apmd
then it fails due to being unable to find ccache. The references to ccache are
coded into libtool-cross but the sstate checksum doesn't reflect this due to the
way the class is coded (output should be the same regardless).
The simplest solution is to remove references to ccache from the libtool script.
The output then works regardless of whether ccache is present or not. The
libtool-cross script is only used in a handful of cases (most of the time its
dynamically generated by autoconf) so any performance issue is minor.
(From OE-Core rev: ed550a49d2114c56e5bc033ecd0e83073d2d4067)
(From OE-Core rev: ee6a2e0ccb11e5f5267bc2e406203c78b0443415)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this patch /usr/bin/libtoolize is different for each multilib
since their host-triplets are different, despite there being no difference in
the functionality of libtoolize itself.
This change just patches out the problematic line since its just a comment for the user
in help text. Ugly but solves the problem. This fixes issues where libtool and
libXX-libtool couldn't be installed into the same system.
(From OE-Core rev: f70040fd3ca3508d33ed24c749c0b8095b020dab)
(From OE-Core rev: 8480fff287e660f85a99fcc28119fe80d517e0b2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Whilst the package managers handle multilib ELF binaries well, they don't
handle scripts in the *bindir directories well. This adds support for
marking these up so that they can be handled using update-alternatives.
Its done this way so that non-multilib systems don't see any changes and
there is standardisation amongst the multilibs on how the alternatives are
named and prioritiesd. The priotitisation code needs to be added but this
change means there is somewhere to add it.
Recipe needs to set MULTILIB_SCRIPTS in the form <pkgname>:<scriptname>, e.g.
MULTILIB_SCRIPTS = "${PN}-dev:${bindir}/file1 ${PN}:${base_bindir}/file2"
to indicate which script files to process from which packages.
libtool is used a as a reference to stop the libtool scripts conflicting
in a multilib case and allows the kernel-devsrc change to be merged.
(From OE-Core rev: 18e837433d07cfdce4019c13f682c6676425a2ad)
(From OE-Core rev: 97e2d65d1c406bc58fe693e500fcc939459bac1a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As per the previous commit, upstream cpio has a bug which means it crashes on
append. If the image being built has already had testimage ran then cpio-native
will be in the sysroot. It's also possible that some distributions are shipping
this broken CVE patch too.
Now that our cpio-native is fixed, until we can be sure that the host cpio isn't
broken depend on cpio-native if building a cpio image.
[ YOCTO #13042 ]
(From OE-Core rev: c3b9aedcbe538d7fa74bd814644b4899769dec46)
(From OE-Core rev: a75eba71145efa1c3d206c5e5c00608a50f013bc)
(From OE-Core rev: 9e1c69932add702b9c5bc1faa9ef5db975de0ee3)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The upstream fix for CVE-2016-2037 introduced a read from uninitialized memory
bug when appending to an existing archive, which is an operation we perform when
building an image.
(From OE-Core rev: 046e3e1fca925febf47b3fdd5d4e9ee2e1fad868)
(From OE-Core rev: 2ff6ab2e2944c6a53523b4b1611e1d22f6393500)
(From OE-Core rev: c0a3874799224c9ae0d6d7dc4d0a0acf364ccdab)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oe-selftest's devtool tests have been broken since commit 2457cd57
(oe-selftest: devtool: avoid parallel races by using temporary copy of
core) if meta is a symbolic link.
(From OE-Core rev: daba6c5a991b370709d17e51305334f55a3858ec)
(From OE-Core rev: 3eb59559ecd2e93fb590a330b47de1db0750fc0b)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some of the devtool tests make changes to files under meta/ -
legitimately since we want these tests to be working with real recipes
and associated files. Unfortunately with the new oe-selftest
parallelisation this can break other tests if files go missing at the
wrong time (among other scenarios). To avoid this issue, simply take a
copy of the core repository and use that for these tests. (We copy the
entire repository since changing the path of meta/ influences COREBASE
and thus we need to have things like scripts/ alongside as well).
(From OE-Core rev: 2457cd57b4195924ef127f497efa2f34f411e660)
(From OE-Core rev: 9cb8353a4f0137823d6ed3e467db9dd7ead7b3de)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The checksum value is only calculated if the uninative class is
inherited, so check for inherit before adding it to local.conf
(From OE-Core rev: 3b5b832589d943700b273e3a4d83561be0c47f36)
(From OE-Core rev: 8e23a3d59421f34961f39a7db512e93eb9647ec6)
Signed-off-by: Jeremy Puhlman <jpuhlman@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
testimage.bbclass installs a SIGTERM handler which conflicts with the
use of multiprocessing here. This is paritcularly problematic if the http
service is terminated before its started and hence before its had a chance
to reset the default signal handler (as the code was written).
Instead, temporarily remove testimage's handler whilst forking the http process
which means the correct handler is installed and won't deadlock.
Also take the opportunity to add in some log messages about the server start
and shutdown so that future debugging is easier and its clearer what the code
is doing.
(From OE-Core rev: cc0471439aa0085ca87deccf061c5b676ef12388)
(From OE-Core rev: 4eac9a5337d93b6cbd3916af97f62bb04881c9cd)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During debugging dnf issue, we found that the test_dnf_install
PASSED the testing even though the environment does not allow
dnf install to run successfully. Further debugging had identified
that current test_dnf_install will execute dnf install even when
the package to be installed already exist, thus dnf install
will just skipped and this test will PASSED even though it was
not.
To solve this, added additional logic to check if the package
to be installed already exist, if yes then remove the package
before actually run dnf install. This will make sure dnf install
was tested as expected.
(From OE-Core rev: 4f662b253f7313c4e02bfafb527cdac076b6309a)
(From OE-Core rev: a80498e62898110e2ed6b01cbb9f5dd85995d13b)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As with the Python test, this can be both better and faster. No need to copy a
file, just run a one-liner.
(From OE-Core rev: c6eef46747fe58bb2310be4f06d2fa9b67901d72)
(From OE-Core rev: 9188ef8d1edbba8041a73d3bb8a9bfd194db0e92)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We should only be wiping out things on target if the tests have
actually run.
(From OE-Core rev: d38c3eac0a5a1a9b0eb98385832e92f48145655e)
(From OE-Core rev: dab22dc58eabaeb421afa3c7de1cc08c5ec34c61)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Qemu do not use the ip input from external. It will
retrieve ip from QemuRunner instance and assign
ip value.
(From OE-Core rev: 14d99dc6c39c963ba3e0d9a30274846bd5369210)
(From OE-Core rev: e4990ae01c9f3f486b4b745a2602795e9d496109)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark up these tests as needing a compiler, make and kernel source code
as appropriate, the image feature requirements can then be retired.
(From OE-Core rev: 9f64e6c25abdf494fb511e9cd401f8dcaa08be2a)
(From OE-Core rev: 544c56b6950f0598d5eaf62d9ae9d9de5fcb7eaf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add the OEHasPackage decorator to a variety of tests so they determine
automatically if they should run against a given image.
To ensure tests can do this we need to move target operations such
as scp commands into the tests and out of the class startup/teardown.
(From OE-Core rev: 60d6580b85714b8960a964e775d76a7f937f5e5a)
(From OE-Core rev: 03b7658369bb7c1c8fbbaac7d9e281617cc16135)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently this is three test cases:
1) test_python_exists. Fail if python3 isn't in PATH.
2) test_python_stdout. Run a Python script and check the output is as expected
3) test_python_testfile. Check that a file test_python_stdout wrote to exists.
(1) should be a setup and skip the test module if it isn't present.
(2) and (3) should be merged, there's no point copying over a two line Python
file, and the test doesn't verify that the file doesn't exist in the first
place.
Rewrite the test to check that Python is present in a class setup so the entire
test is skipped if it isn't and do some simple rot13 to verify that bytecode is
being executed correctly.
(From OE-Core rev: a35be5f32b4fe70b18ac1e2eccfd94558cecfbba)
(From OE-Core rev: babdd2f6addb06c23e4882107be07034ca49bcb8)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Then we can get user's UID and GID rather than hardcode to 1000, e.g.:
- Without sudo
$ runqemu-gen-tapdevs --help
[snip]
$ sudo ../poky/scripts/runqemu-gen-tapdevs 15220 100 4 tmp/sysroots-components/x86_64/qemu-helper-native/usr/bin
[snip]
- With sudo
$ sudo ../poky/scripts/runqemu-gen-tapdevs --help
[snip]
$ sudo ../poky/scripts/runqemu-gen-tapdevs 15220 100 4 tmp/sysroots-components/x86_64/qemu-helper-native/usr/bin
[snip]
(From OE-Core rev: 446e7da7e56f9de3602498b5ef40e9e0f8f71837)
(From OE-Core rev: e5bebaddab47b418013f3d329dbb105ce69118bf)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Where possible pass lists instead of strings, don't use a subshell, and call
check*() instead of using Popen directly.
(From OE-Core rev: d2374623444752af1ad748ed36b68ea58f629bf6)
(From OE-Core rev: a2cbc5954d44b0922136fc3d75f891064a948298)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The test cases assume that rpm-doc is built out, as it says it its
comment. This is not always true. And it sometimes results in
following error.
| cls.tc.target.copyTo(test_file, dst)
| UnboundLocalError: local variable 'test_file' referenced before assignment
Change to use base-passwd-doc, as this package is more likely to be
built out than rpm-doc.
(From OE-Core rev: 2e23543b48921182307065c1fa9e8b9d7fbb3cdc)
(From OE-Core rev: 1ce378ce07d2c49f40054893a623456c8471e177)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are failures when multiple users run oe-selftest on the same
host:
PermissionError: [Errno 13] Permission denied: '/tmp/oe-saved-
tests/201812250324_qemu'
This is because /tmp/oe-saved-tests was created by user A, while user B tries
to write data in it, then the error will happen. This patch can fix the
problem.
Move the dumped data to ${LOG_DIR}/runtime-hostdump/ rather than
/tmp/oe-saved-tests/ to fix the problem.
(From OE-Core rev: e219fe5329599cd6c3682f521eaee3852a2c8980)
(From OE-Core rev: 872c6e5101f4f27dcfc63d141d1b6568f46d2b5f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When use simpleremote target the flash/boot process is executed
manually, the IMAGE_FSTYPES validation is only needed when execute
testimage against qemu.
The supported_fstypes comes from oeqa.core.target.qemu module.
(From OE-Core rev: e7dc5963adbacc091fe8943119262166977623ad)
(From OE-Core rev: 05896e2f83ffef5262ccd3a0fa20b81b2a878957)
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Boot parameter systemd.log_target=console affects command journalctl's
output and causes oe selftest case test_systemd_boot_time fail to pass.
| Error at obtaining the boot time from journalctl
| RESULTS:
| RESULTS - systemd.SystemdJournalTests.test_systemd_boot_time - Testcase -1: SKIPPED (0.74s)
systemd.log_target=console was introduced by oe-core commit a0bb649 and
work with parameter systemd.log_level to enable systemd debug.
systemd.log_level has been removed already, so remove systemd.log_target
too to make case test_systemd_boot_time pass.
(From OE-Core rev: caa776bdcf8ea34c857f45970370bf771075f4bc)
(From OE-Core rev: 9d8a97b43c42b87c56d3b2ac318cb5482e86c397)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a variable called TEST_QEMUPARAMS in testimage.bbclass to make it
possible to pass parameters to qemu. This can be useful for e.g.
increasing the amount of RAM available during testimage runs.
(From OE-Core rev: 1a9163f5779d233c884c8fd50e0812eabab4fdf3)
(From OE-Core rev: 643457d350a921379600248f99d73374e6a2f5a2)
Signed-off-by: Erik Botö <erik.boto@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that the hangs in httpservice are fixed we can let these tests
auto skip as appropriate.
(From OE-Core rev: 42a0d70291d551578e21f590fcb85ca72a78ccb5)
(From OE-Core rev: d82f2a0a17ecad5fdb2d2450f5048d00cf0448b1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now the test markup of the development tools tests is complete, this
can be further tweaked to auto run the correct tests.
(From OE-Core rev: bd4f8d12fe1f9f2643ee9e68fa2bb981134294fb)
(From OE-Core rev: 4b9641505f39718fe820eb199ed6554662d4d4cf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that the tests have correct markup to automatically determine which images
they can run against, clean up the default test suites logic to be simpler
and not image specific.
Some cleanup of the compiler tests still needs to be completed but this
is a good first step.
The only downside to this is more noise during testing as we now see
many skipped messages for simple images like core-image-minimal.
The auto type is being removed since it currently breaks badly due to the
socat mandatory inclusion from the meta-selftest layer which is a problem
which needs to be addressed seperately.
(From OE-Core rev: 4966bc33845752eb0aeae54b72e8ba0146a7ed52)
(From OE-Core rev: eeee75d0a51ab7c15457b89233b7bb5254d7ee0b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[Fix for sumo context]
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add test cases to test “exclude” and “installroot“ options, also modify
the logic of filtering packages on the feed to have all the packages
needed by the tests.
[YOCTO #10744]
(From OE-Core rev: 1121806603c6f621d084b692216f3f616a0768dc)
(From OE-Core rev: e1b050f53ece2a31cd6866d2d737d7c67a44cea4)
Signed-off-by: Jose Perez Carranza <jose.perez.carranza@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The KBUILD_BUILD_USER and KBUILD_BUILD_HOST variables were
assigned at the kernel class level, which made it impossible
to override them in the local configuration.
By setting only the default values of those variables in the
kernel class, it is now possible to override them as expected.
(From OE-Core rev: a3e8cdf9c3ba966fa4b5a21235540eb0b00fb487)
(From OE-Core rev: 2fac83ff87d9ad934250f712d2d0fd91fccb8728)
Signed-off-by: Federico Sauter <federico.sauter@ableton.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
MACHINE = "qemux86"
QEMU_USE_KVM = "qemux86"
IMAGE_CLASSES += "testimage"
$ oe-selftest -r runqemu.RunqemuTests.test_boot_rootfs
[snip]
File "/buildarea1/lyang1/poky/meta/lib/oe/types.py", line 122, in boolean
raise ValueError("Invalid boolean value '%s'" % value)
ValueError: Invalid boolean value 'qemux86'
Now QEMU_USE_KVM can only be boolean, can not contain MACHINE any more, kvm
will be enabled if target_arch == build_arch or both of them are x86 archs.
(From OE-Core rev: 7c1a8a624cad8d967635c6cb5f99cf655bde3d44)
(From OE-Core rev: de1b80f7f7b787f6b5b62c576ca6c62d2440031c)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some patch files create entirely new files, so their permissions are subject to
the host umask. If such a file is later installed into a package with no change
in permissions, it breaks the reproducibility of the package.
This was observed on libpam, for instance: The patch file
pam-security-abstract-securetty-handling.patch creates a new file
(tty_secure.c). This file is later copied into the -dbg package with no change
in permissions.
(From OE-Core rev: 2a2bbd755b330cd63f7f6e2f2b374a3ae065b37a)
(From OE-Core rev: ae10351f4aa443fc6df5a674b0aae0731304254d)
Signed-off-by: Douglas Royds <douglas.royds@taitradio.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without installing gitpython package, oe-git-archive will face error
below, where it was referencing key that was non-existent inside
metadata object.
Traceback (most recent call last):
File "<poky_dir>/scripts/oe-git-archive", line 271, in <module>
sys.exit(main())
File "<poky_dir>/scripts/oe-git-archive", line 229, in main
'commit_count': metadata['layers']['meta']['commit_count'],
KeyError: 'commit_count'
Fix this error by adding exception catch when referencing
non-existent key (based on inputs provided by Richard Purdie).
[YOCTO# 13082]
(From OE-Core rev: 9a3cc9b8523b78dda6c3f3f2e12798b2b907d7e5)
(From OE-Core rev: 89dcc555f57ce13645c3876b42be3846fe3b7863)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I think this lock dates from before we had sstate for do_packagedata.
Since WORKDIR is recipe specific and we write into WORKDIR, we no longer need
any write locks in the do_packagedata code itself, its handled by the sstate
task lock for the final copy in at the end. The final write lock can be simply
removed.
The only time we need read locking is when actually reading data from the
shared directory. We can therefore reduce the window the lock is held
significantly as well, hence improving the speed of packagedata tasks running
in parallel.
(From OE-Core rev: f7106cdf2190d9ec59132a1cb2bb431d653cd9c5)
(From OE-Core rev: 1af1e9c23965637ab4a23b3eaf64192694c5448d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
QEMU_USE_KVM can either be a boolean or a whitespace separated list
of kvm supported machines.
For the 'intel-corei7-64' machine, defined in meta-intel, kvm could not be
used as the 'x86' substring is not part of its machine name.
By changing the order of this 'or' statement and setting
the 'QEMU_USE_KVM' variable to 'intel-corei7-64', it is possible to run the
'testimage' task with kvm support successfully.
(From OE-Core rev: a22789253aa653dc50fb159b40910248c2f98dd4)
(From OE-Core rev: 3383b1f9bb4aedfb88e888e88fe316e3f361c7bf)
Signed-off-by: Emmanuel Roullit <emmanuel.roullit@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use our own lsb function instead as used elsewhere by the codebase.
(From OE-Core rev: acac45a6fd604d28ef7c23d67482af3d7e8bcfe3)
(From OE-Core rev: 570256a64af5a3fa994a20a5cc4c74d59ffc361f)
(From OE-Core rev: d58fe9d352ae7de857e7f55b88f6e7d35b2cd706)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 5s timeout for non-kvm is too short, especially when the load is high,
which leads to unexpected errors, so set timeout to 60s by default.
(From OE-Core rev: 8197d0f638a760fc03062c7a9009117d083d7ead)
(From OE-Core rev: 6c930a8f5c11947c3b916efe23f33af462701bee)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018i:
Briefly:
São Tomé and Príncipe switches from +01 to +00 on 2019-01-01.
Changes to future timestamps
Due to a change in government, São Tomé and Príncipe switches back
from +01 to +00 on 2019-01-01 at 02:00. (Thanks to Vadim
Nasardinov and Michael Deckers.)
2018h:
Briefly:
Qyzylorda, Kazakhstan moved from +06 to +05 on 2018-12-21.
New zone Asia/Qostanay because Qostanay, Kazakhstan didn't move.
Metlakatla, Alaska observes PST this winter only.
Guess Morocco will continue to adjust clocks around Ramadan.
Add predictions for Iran from 2038 through 2090.
Changes to future timestamps
Guess that Morocco will continue to fall back just before and
spring forward just after Ramadan, the practice since 2012.
(Thanks to Maamar Abdelkader.) This means Morocco will observe
negative DST during Ramadan in main and vanguard formats, and in
rearguard format it stays in the +00 timezone and observes
ordinary DST in all months other than Ramadan. As before, extend
this guesswork to the year 2037. As a consequence, Morocco is
scheduled to observe three DST transitions in some Gregorian years
(e.g., 2033) due to the mismatch between the Gregorian and Islamic
calendars.
The table of exact transitions for Iranian DST has been extended.
It formerly cut off before the year 2038 in a nod to 32-bit time_t.
It now cuts off before 2091 as there is doubt about how the Persian
calendar will treat 2091. This change predicts DST transitions in
2038-9, 2042-3, and 2046-7 to occur one day later than previously
predicted. As before, post-cutoff transitions are approximated.
Changes to past and future timestamps
Qyzylorda (aka Kyzylorda) oblast in Kazakhstan moved from +06 to
+05 on 2018-12-21. This is a zone split as Qostanay (aka
Kostanay) did not switch, so create a zone Asia/Qostanay.
Metlakatla moved from Alaska to Pacific standard time on 2018-11-04.
It did not change clocks that day and remains on -08 this winter.
(Thanks to Ryan Stanley.) It will revert to the usual Alaska
rules next spring, so this change affects only timestamps
from 2018-11-04 through 2019-03-10.
Change to past timestamps
Kwajalein's 1993-08-20 transition from -12 to +12 was at 24:00,
not 00:00. I transcribed the time incorrectly from Shanks.
(Thanks to Phake Nick.)
Nauru's 1979 transition was on 02-10 at 02:00, not 05-01 at 00:00.
(Thanks to Phake Nick.)
Guam observed DST irregularly from 1959 through 1977.
(Thanks to Phake Nick.)
Hong Kong observed DST in 1941 starting 06-15 (not 04-01), then on
10-01 changed standard time to +08:30 (not +08). Its transition
back to +08 after WWII was on 1945-09-15, not the previous day.
Its 1904-10-30 change took effect at 01:00 +08 (not 00:00 LMT).
(Thanks to Phake Nick, Steve Allen, and Joseph Myers.) Also,
its 1952 fallback was on 11-02 (not 10-25).
This release contains many changes to timestamps before 1946 due
to Japanese possession or occupation of Pacific/Chuuk,
Pacific/Guam, Pacific/Kosrae, Pacific/Kwajalein, Pacific/Majuro,
Pacific/Nauru, Pacific/Palau, and Pacific/Pohnpei.
(Thanks to Phake Nick.)
Assume that the Spanish East Indies was like the Philippines and
observed American time until the end of 1844. This affects
Pacific/Chuuk, Pacific/Kosrae, Pacific/Palau, and Pacific/Pohnpei.
Changes to past tm_isdst flags
For the recent Morocco change, the tm_isdst flag should be 1 from
2018-10-27 00:00 to 2018-10-28 03:00. (Thanks to Michael Deckers.)
Give a URL to the official decree. (Thanks to Matt Johnson.)
(From OE-Core rev: 100d0d0f24cabedd1a89b69ac8ffb05d85663761)
(From OE-Core rev: 40679b9ee29b600a514f2fb82865a0fecca70bf7)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
