Add systemd support for distcc.
These unit files mainly use the same files in Fedora 20 as a reference.
[YOCTO #4420]
(From OE-Core rev: baae0b0e8786e26b60e17c4febd57ca1915f1e55)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch contains a few fixes for the systemd unit files of openssh.
The fixes use the same unit files in Fedora 20 as a reference.
1) Remove sshdgenkeys.service and sshd@.service from SYSTEMD_SERVICE.
2) Fix the dependency and logic of sshdgenkeys.service.
(From OE-Core rev: 4379e6f3096c893db5fa6a0b4569a0440e4494fe)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch mainly comes from meta-systemd with a few modifications.
The purpose is to get rid of the LSB init scripts in systemd images.
[YOCTO #4420]
(From OE-Core rev: 5d90c5ebdb899b2951c97a94ff57867c1e491c15)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch mainly involves four changes.
1. Ship the sys.tar.xz and extract it on target to avoid ELOOP error.
2. Make systemd-ptest rdepend on bash and perl as the test cases need them.
3. Fix paths in Makefile so that the test cases could run on target.
4. Install ${libdir}/udev/rules.d directory to make udev-test.pl work.
[YOCTO #5664]
[YOCTO #5673]
[YOCTO #5674]
(From OE-Core rev: 03ed9095b1ca54a060407f355be0ad9ec86b7610)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its rather sad that people don't appear to read local.conf and then complain
about slow builds when they're just using a single thread. Most systems have
more than one core now so we might as well use a more automatic default
for these values. This may lead to better experiences for new users.
[YOCTO #2528]
(From meta-yocto rev: 52bf4bdcaea0df69231327413d502aad11c3adf3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The tune-x86_64.inc file is conceptually flawed. x86_64 is more akin to
the x86 and x86-32 ABIs defined in arch-x86.inc than it is a concrete
tune file, such as i586 or core2 - to the extent that everything but the
default tune is defined in the arch-x86.inc file. This becomes very
apparant when attempting to include tune-x86_64.inc in the x86 tune
hierarchy.
Remove the tune-x86_64.inc tune file in favor of it being an ABI
definition in arch-x86.inc and relying on the linear hierarchy of
concrete cpu-types in tune-i586, tune-core2, and tune-corei7.
core2_64 should suffice in lieu of x86_64 for all but a couple esoteric
corner cases involving older pre-core2 CPUs. In these cases, if they
exist at all, the BSP can replace the include tune-x86_64.inc with
arch-x86.inc and set the default tune to x86_64.
(From OE-Core rev: d8884649b2b3e76519bc10f5908f98d940a9c0cb)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Paul Eggleton <paul.eggleton@intel.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Nitin Kamble <nitin.a.kamble@intel.com>
Cc: Mark Hatle <mark.hatle@windriver.com>
Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
Cc: Martin Jansa <martin.jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Core2 has both a 32b and a 64b variant. Currently, core2 implies 32b,
while core2_64 is the 64b version. This implicit 32b mode will become
confusing in later architectures, such as corei7, where it would be
natural for people to assume "corei7" meant 64 bit.
Rather than carrying forward an implicit 32b mode and rather than
changing the naming scheme part way through the architecture hiearchy,
make the 32b and 64b variant explicit in the tune name by changing core2
to core2-32. This patch also standardises on using '-' in the names.
(From OE-Core rev: 69e6395b8d11e2940892a6293ecbbe645c2a478b)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Paul Eggleton <paul.eggleton@intel.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Nitin Kamble <nitin.a.kamble@intel.com>
Cc: Mark Hatle <mark.hatle@windriver.com>
Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
Cc: Martin Jansa <martin.jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-march specifies which ISA to use. -mtune specifies which cpu-type to
optimize instruction ordering for, but not which ISA to use. There are
times when it may make sense to specify mtune=generic and use a more
specific march, such as core2, but the opposite makes little sense at
all: use cpu-type specific ISA, but order the instructions
generically. While the -mtune is implied by -march, gcc does not verify
it is using -mtune=core2 with:
gcc -Q -march=core2 --help=target
Explicitly specify -mtune=core2 to be sure.
Add a comment header describing the CPUs targeted by this tune file.
(From OE-Core rev: 4cd33193b2db6c281275db2fb5cc169181955217)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Paul Eggleton <paul.eggleton@intel.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Nitin Kamble <nitin.a.kamble@intel.com>
Cc: Mark Hatle <mark.hatle@windriver.com>
Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
Cc: Martin Jansa <martin.jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a cpu_count wrapper function (useful from annonymous python where
the import would be trickier).
(From OE-Core rev: 0ae27a55759e7c4254e704e18b304d40013cb5c3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made sure that these are lower-cased. Also, removed the tags
for cross-referencing into the term section of the YP Development
Manual.
(Bitbake rev: f9e3de2bb3e73204ef35d102ff26ee7393056ede)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Corrected grammar and applied active voice where possible.
Also removed several cross-reference tags to the YP manual set.
(Bitbake rev: 17cbad436c97e904a04596237022e84853b10a21)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I commented out two blocks of code that are responsible
for getting the book's title to format onto the title page.
Commenting the code out suppresses the title from the
PDF version's title page yet retains the title text for the
HTML tab space of the browser. The reason this is necessary
is because the BitBake User Manual uses an image file for
the title. Thus, it is not necessary to print the title
again.
(Bitbake rev: d7f15880c5423d91fd786e291f3e062545342184)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added five parameters here to match the build process used
for the YP manual set.
(Bitbake rev: f95994be26986098c2603ef6d4cb10f06422b790)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There were two section tags that used the same id name "classes".
One was in the intro chapter and one was in the metadata chapter.
This was causing an exception in the PDF creation process and
breaking it. I renamed the tag in the metadata chapter
"metadata-classes".
(Bitbake rev: d5f405586f7c50c602241519d32d02b1c7b1f345)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a scrubbed copy of the YP ref-manual glossary. The content
was scrubbed to contain BB variables only. Removed broken
cross-references, made sure the PDF file built.
(Bitbake rev: aae6bcb7fb6e056eb7b1027a8054f6ea5f8ab2b2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
