The wget default is a 900 second timeout and 20 retries. This is way too long
for most of our usecases so this patch changes it to a 30 second timeout and
reduces retries from 5 to 2. We have good mirror infrastructure, this will
let us fall back to it easier.
(From OE-Core rev: dbb88617576ea9bbeec08f5e5e15c26c4c18347f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ncurses failure non-gplv3 build (race issue) like the following \
error information:
| tic: error while loading shared libraries: /srv/home/pokybuild \
/yocto-autobuilder/yocto-slave/nightly-non-gpl3/build/build/tmp/\
work/x86_64-linux/ncurses-native-5.9-r8.1/ncurses-5.9/narrowc/lib\
/libtinfo.so.5: file too short
| ? tic could not build /srv/home/pokybuild/yocto-autobuilder/\
yocto-slave/nightly-non-gpl3/build/build/tmp/work/x86_64-linux/\
ncurses-native-5.9-r8.1/image/srv/home/pokybuild/yocto-autobuilder\
/yocto-slave/nightly-non-gpl3/build/build/tmp/sysroots/x86_64-linux\
/usr/share/terminfo
| make[1]: *** [install.data] Error 1
This is a race issue which is caused by
install.libs and install.data:
1) install.data needs run tic
2) tic needs libtinfo.so
3) install.libs would regenerate libtinfo.so
4) but install.data doesn't depend on install.libs, and they can run
parallelly
So there would be errors in a very critical condition: tic is begining
to run at the same time when install.libs is generating libtinfo.so, and
this libtinfo.so is not integrity, then there would be the above error.
Let task install.libs run before install.data for fixing this bug.
[YOCTO #2298]
(From OE-Core rev: 6993570787a97fbca5ea81513b0120c6d7563484)
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a bug if we:
1) bitbake diffutils with MACHINE=crownbay
2) bitbake diffutils with MACHINE=qemux86
3) bitbake core-image-sato with MACHINE=crownbay
Then the diffutils.i586 would be installed to the crownbay's image, this
is because diffutils.i586 is newer than diffutils.core2, and rpm doesn't
respect to the arch priorities:
We have put the archs in order in _solve_dbpath:
crownbay/solvedb:core2/solvedb:i586/solvedb:all/solvedb
Fix rpm to respect to the order, for example, if it finds a pkg in both
core2/ and i586/, and the core2/ comes first, it should not use the one
in i586/ even if it's build time is newer.
Note: Don't worry about the _free(*ptr), it can check whether ptr is
NULL or not.
This is for the denzil branch, and the master branch also needs it.
[YOCTO #2360]
(From OE-Core rev: 2199e6b9c82bb2b6738e87903f30329586db20e2)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When case about No browser, such as running in 'Build Appliance', user can't open
the hyper link, so add this work around for user. (Checking the browser is avaiable
or not is hard by different system and browser type)
[YOCTO #2340]
(Bitbake rev: 02cc701869bceb2d0e11fe3cf51fb0582cda01b0)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because the arrow icon refresh so fast as the go backward by illusion, so adjust it slow.
[YOCTO #2335]
(Bitbake rev: ac4a8885fafdc0d1e79831334ead9a8ddb6e2472)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We may meet certain command failure during build time, for example,
out of memory. In this case, we need to clear the "building" status.
This fixes [YOCTO #2371]
(Bitbake rev: 283dbbbf5d34adb4c9e3aa87e3925fdebe21ff42)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current yocto-bsp help assumes knowledge that the meta-intel layer
needs to be cloned before it's put into the BBLAYERS. Avoid the
guesswork and state the details explicitly in the help.
Also, the shorter 'usage' string doesn't mention it at all; it would
help to at minimum mention it and refer the user to the detailed help.
Fixes [YOCTO #2330].
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current code assumes that builddir == srcdir/build, which it
obviously isn't sometimes. Use BUILDDIR to get the actual builddir
being used.
Fixes [YOCTO #2219].
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example showing how to use pre-built images, the toolchain, and
filesystem was off a bit. I changed some wording to indicate using the
.ext3 filetype of the filesystem. Previously it talked about expanding
the tarball version but the example has been changed to use .ext3.
Also, the environment setup file has been mis-named forever. It should
have i586 in it and not i686. And, finally, the image name does not
have a release number as part of the name.
(From yocto-docs rev: 97ed79993dd3e2eede4807482e15633b66b99f49)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The linux-yocto_3.2.bbappend example was out of date. There is no
longer a kernel features statement in the last part of the section.
Only COMPATIBLE_MACHINE, KMACHINE, and KBRANCH remain. I removed
the fourth one from the text description and the example code.
(From yocto-docs rev: 89a11ce3c2a43e2d7c26599976d906011130131f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a note telling the user that the commit ID strings in the
example might not match the actual commit ID strings found in
the .bbappend file.
(From yocto-docs rev: 0477122c42eaf6d5e18e28a2356fe58c1070c608)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Due to a bug (2256) the example that changes the kernel configuration
through menuconfig did not work. I have re-written the section
to now start with the default behavior of CONFIG_SMP=y and then
have the user change the configuration to where it is not set.
The changes include the reversing of the flow and the work-around
needed due to bug 2256.
(From yocto-docs rev: 2eaaafab0390d1108b212b9cfb7ca8365e0f39a9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added 1.2.1 manual history entry to five manuals. The date
is to be determined.
(From yocto-docs rev: bb920814d5adaa24d37fbcefd85de2ba93ddf604)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove mercurial as this is no longer needed.
linuxdoc-tools was mentioned twice in the CentOS list.
We no longer support Fedora versions older than 15 so remove this note.
This commit applies to 1.2, 1.2.1, and 1.3.
(From yocto-docs rev: 1347f92c49e61a42aa51e5c1ffccde88a449a4fb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I discovered a bug when publishing documents. There are two scp
commands that copy a document's files and figures to the appropriate
directory in the srifenbark@yocto-www:~/www.yoctoproject.or-docs
server where the manuals are published. The second scp command
had a "/figures" at the end. This was causing a new "figures"
directory to be created within the "figures" directory. This
redundancy shows up as missing figures in the manuals if a new figure
or changed figure is ever added to the book after initial
publishing. I removed the extra "/figures" at the end of the scp
command.
(From yocto-docs rev: 5ab530f998427405a0486b94ca76cff58a4cf463)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
App/ExportWizard.cpp depends on wizard.h which depends on ui_wizard. The last one
should be already generated before compiling ExportWizard.cpp.
[YOCTO #2297]
(From OE-Core rev: d7bf94647f17c0382caad8af0bdda837b14b22dc)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you point to snapshot.debian.net/archive/pool then it will fetch
you a html page which will end up in corrupt download. The locations
have changed for archives and here we point the mirror to right
location.
(From OE-Core rev: d5574749b2272357f6bdad04c37ec0657b391cca)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Multi-libs of Pango need different modules, thus different config files and
utils. This patch separate config file and utils with different MLPREFIX to
avoid conflict.
[YOCTO #2356] got fixed.
(From OE-Core rev: 535e298b98182d95c3280d2d46aa6388e27aac40)
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In qt4's do_configure operation, it will refer to some variables that
are derived from 'd', however these variable values may be not correct
in multilib case since the extraction of these variables happens before
the multilib handler.
The fix is to move these python style functions back to shell style.
This fixes [YOCTO #2355]
[RP: Fix whitepace]
(From OE-Core rev: 98cb2efe4e9f3092d531c9fc809406c3ef559725)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[SG: Resolve merge conflicts for 1.2.1]
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2385]
The installer only searches for hd[ab] sd[ab]. Some newer BSPs have mmcblk
devices that should be used as the install target. These devices also have a
partition prefix (mmcblk0p1 instead of mmcblk01). As they are detected
asynchronously, it is necessary to add the rootwait kernel parameter to avoid
a race condition trying to mount the root device.
As BSPs like the FRI2 and the sys940x have mmc devices and will have a 1.2
release, we should push this to 1.2.1. The changes are perfectly contained and
easily verified.
Test for an mmcblk device and add the p partition prefix if necessary. Add the
rootwait kernel parameter when an mmcblk device is detected. Replace the series
of explicit umount commands with a single umount using a wildcard. This will
find all the partitions and will not try to unmount non-existant devices. Avoid
copy and paste errors by replacing /dev/${device}${pX} references with the
previously assigned rootfs, bootfs, and swap variables.
These changes have been tested on the FRI2 Sato image which installed to
/dev/mmcblk0 as well as the N450 Sato image which installed to /dev/sda. Both
were successful.
(From OE-Core rev: 36634e16c0a0c80674bacf20f9841e3b042bd5fd)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The echo line here was merging multiple lines into one, and the result
was that if both image and package changes had to be comitted then only
the image changes were being committed and the package changes could
potentially be merged into the next package change. Quoting the variable
reference fixes this.
Fixes [YOCTO #2411]
(From OE-Core rev: 540cd9d42a4db562e5eca431cec89ac5a6a05cab)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add dialog box while bitbake starts hob to inform user
to please wait for the hob screen to become visible.
(From OE-Core rev: e9239e4250ef140920847f78625cc7206763c32c)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While building on distros like fedora17, which has /bin/perl,
the target perl scripts get perl path also as /bin/perl.
And that is not correction path of perl on the target.
This commit avoids this error.
| error: Failed dependencies:
| /bin/perl is needed by quilt-0.51-r2.i586
NOTE: package core-image-sato-sdk-1.0-r0: task do_rootfs: Failed
ERROR: Task 8
(/home/nitin/prj/poky.git/meta/recipes-sato/images/core-image-sato-sdk.bb,
do_rootfs) failed with exit code '1'
(From OE-Core rev: c8c394bd806978c867f2fe82e4bde65c98764880)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change ensures we use the user-config.jam Configuration
that we created and will not use anything from the user's home
directory.
[YOCTO #2302]
(From OE-Core rev: f246e467b8513f1c1c33b5e7462ae6478754d531)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modified the uclibc PACKAGES list order to ensure the uclibc-dev package is
processed before uclibc-staticdev to allow *_nonshared.a libraries to be
packaged in the uclibc-dev package. The *_nonshared.a libraries are required
by the SDK.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix the IP masquerading settings so that networked QEMU sessions can
reach external networks.
This is a partial fix for [YOCTO #2329].
(From OE-Core rev: 78c7a82a2e3214eaec3c559269e3cc6c219759c0)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
License hasn't changed, just updated the md5 checksums due to trivial
date changes within the text (and the position of the license text
within png.h).
Addresses CVE-2011-3045
Fixes [YOCTO #2352]
(From OE-Core rev: 6e2235a4d769b16ebf68d6bbed56d8bcc0e0c83f)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python should search for db.h in inc_dirs and not in a hardcoded path.
If db.h is found but HASHVERSION is not 2 we avoid a warning by not.
adding this module to missing variable.
[YOCTO #1937]
(From OE-Core rev: 8eb3e52d39147f8cb98ec95857be17db0444098e)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch was added for 64bit host machines. In the compile process python
is checking if platform is a 64bit platform using sys.maxint which is the host's
value. The patch fixes this issue so that python would check if TARGET machine
is 64bit not the HOST machine. In this way will have "dl" and "imageop" modules
built if HOST machine is 64bit but the target machine is 32bit.
[YOCTO #1937]
(From OE-Core rev: 22ae3959f40845ebcc00413ccf733539472a1a81)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* depmod already gets executed by pkg_postinst_kernel-image.
* If you build a module using module.bbclass, pkg_postinst returns 1 in
do_rootfs, causing pkg_postinst to run again on first boot. To improve
this situation, I copied pkg_postinst from kernel.bbclass to module.bbclass.
This was rejected by Koen, because he doesn't like the code from
kernel.bblcass, which uses ${STAGING_DIR_KERNEL}. Richard then suggested
that calling depmod during do_rootfs wasn't necessary at all, because
it already gets done by kernel-image.
(From OE-Core rev: 663b4be025283a30adb823760ce9d9a056106bcf)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For example, pseudo-native wants to set LD_LIBRBARY_PATH but setting this
into the environment here causes the existing pseudo (running during do_install)
to poke into paths in /opt and this breaks builds.
The simplest fix is simply not to do this. Comments tweaks to match the code.
(From OE-Core rev: 915769c405e24751eae613e9ef55f05490a726de)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backport a fix from 1.16.x upstream to use fd instead of stream-based
I/O in dpkg-deb, which avoids the use of fflush() on an input stream
(the behaviour of which is undefined by POSIX, and appears to have
changed in the version of glibc introduced in Fedora 16 and presumably
other systems).
Fixes [YOCTO #1858].
(From OE-Core rev: b1c28667592e736115ab5e603a12c2723b939cf2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
patch.bbclass orignally pointed at /usr/bin/quiltrc for an empty
version to ensure that no user setting were picked up, change this
to /etc/quiltrc in the Native sysroot since we now have a native
sysconfdir.
Make sure that the quiltrc is actually installed in the Native
sysconfdir, not the target, so fix this after the recipe split.
(From OE-Core rev: aec4cdc6efda430a0965d6b3b4f84c7943390273)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
WARNING: For recipe gcc, the following files/directories were installed but not shipped in any package:
WARNING: /usr/include
WARNING: /usr/lib/gcc/arm-poky-linux-gnueabi/4.6.4/plugin/libgcc
WARNING: /usr/lib/gcc/arm-poky-linux-gnueabi/4.6.4/plugin/libgcc/config
WARNING: /usr/lib/gcc/arm-poky-linux-gnueabi/4.6.4/plugin/libgcc/config/arm
WARNING: /usr/lib/gcc/arm-poky-linux-gnueabi/4.6.4/plugin/libgcc/config/arm/bpabi-lib.h
(From OE-Core rev: cf49cf3958b24fdb89d57abbf1f1b30c07a06030)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
WARNING: For recipe xserver-kdrive, the following files/directories were installed but not shipped in any package:
WARNING: /usr/share/man
WARNING: /usr/share/man/man5
WARNING: /usr/share/man/man1
WARNING: /usr/share/man/man1/Xephyr.1
WARNING: /usr/share/man/man1/Xserver.1
(From OE-Core rev: 515cbe565b684359ac9d8bd0fb523aa3d2f810e2)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
WARNING: For recipe libgcc, the following files/directories were installed but not shipped in any package:
WARNING: /usr/lib/powerpc-poky-linux/4.6.4/ecrti.o
WARNING: /usr/lib/powerpc-poky-linux/4.6.4/ncrti.o
WARNING: /usr/lib/powerpc-poky-linux/4.6.4/ecrtn.o
WARNING: /usr/lib/powerpc-poky-linux/4.6.4/ncrtn.o
(From OE-Core rev: 580d734ddc928aaaac9acaa248427b01731074f2)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
WARNING: For recipe binutils, the following files/directories were installed but not shipped in any package:
WARNING: /usr/bin/embedspu
(From OE-Core rev: 15c8ea4d35edbcaf03c94aba06ded85851679157)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bdwgc recipe uses a version of libatomic that fails when building in Thumb
mode. This has been fixed upstream already. The
pulseaudio/libatomics-ops_1.2.bb has the same issue and sets the
ARM_INSTRUCTION_SET to "arm" (probably until a new version gets pulled in).
This patch applies the same workaround to the bdwgc/bdwgc_20110107.bb recipe.
(From OE-Core rev: 544fe63b6a861129ea15f4cd37952e513ab0013e)
Signed-off-by: Ken Werner <ken.werner@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With PARALLEL_MAKE set to 14, I frequently see the gthumb do_install
task hang. Make is spinning at 100% CPU and the build makes no
more progress.
The following work-around proposed by Richard Purdie allows progress
to be made.
(From OE-Core rev: e933129ddb8ae55d618b5875fca26bc46fcb100b)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Joshua Lock <josh@linux.intel.com>
CC: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Those fixes are required to get the test scripts to work with current
0.79 DBus API.
(From OE-Core rev: aadeb3199d1b34369b63810696b9d61a86afb31d)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes errors like below
/home/kraj/work/angstrom/build/tmp-angstrom_2010_x-eglibc/sysroots/x86_64-linux/usr/libexec/armv5te-angstrom-linux-gnueabi/gcc/arm-angstrom-linux-gnueabi/4.6.3/ld:
error: hidden symbol '__start___debug' is not defined locally
/home/kraj/work/angstrom/build/tmp-angstrom_2010_x-eglibc/sysroots/x86_64-linux/usr/libexec/armv5te-angstrom-linux-gnueabi/gcc/arm-angstrom-linux-gnueabi/4.6.3/ld:
error: hidden symbol '__stop___debug' is not defined locally
collect2: ld returned 1 exit status
make[1]: *** [plugins/loopback.la] Error 1
(From OE-Core rev: 3e6e97b40f8cb9568993c5cc65d73189ec6b7b8a)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
