* This is a cosmetic patch.
* Using ON/OFF instead of True/False is exactly the same for cmake
(is case insensitive).
* But WebKitGTK+ preffers (and uses) the first option. So when you
check which values were enabled for the build (at log.do_configure)
you will see that every option that was not modified will print either
OFF or ON, meanwhile the options modified by this recipe will print
True or False. For example:
[...]
-- ENABLE_THREADED_COMPOSITOR OFF
-- ENABLE_PLUGIN_PROCESS_GTK2 .............. ON
-- ENABLE_MINIBROWSER True
[...]
(From OE-Core rev: 04a1030951f14b95abe917e53116021ebc6c4396)
Signed-off-by: Carlos Alberto Lopez Perez <clopez@igalia.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updates for distro_alias.inc. This should be pulled for jethro and
master branches.
(From OE-Core rev: 87e5a9866c31e7fa4c9eebb1d4b925d94cba5842)
Signed-off-by: Beth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the openembedded-core layer is specified in the toasterconf we need
to treat it differently because we may also get this layer either from
the layerindex source or I can also be provided locally.
(From meta-yocto rev: c05a715d0548eaf8c02c5fef43bab042efe171d4)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: brian avery <avery.brian@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
connman daemon forks during normal usage,
so this test is no longer valid and generates
sometimes false positives.
This reverts commit 7d01c595c9.
(From OE-Core rev: bc974be50d5eff4eed00078ad1d1976ee81c5ecc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BROKEN support was removed from bitbake back in 2013. These lines just
increase parsing time, remove them.
(From OE-Core rev: 140249a43eb7a36d09d55e7e633b502ddc345f90)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It only matched name ony in the past, for example:
smart install busybox (matched)
but:
smart install busybox@core2_64 (didn't match)
The installation is very slow when no match since it would seach all the
packages in the repo, and what we use mostly in oe-core is the second
case, so the installation is very slow when install COMPLEMENTARY
packages such as the task do_populate_sdk.
This patch makes it match both.
* Speed up
MACHINE = "qemux86-64"
- When multilib enabled:
$ bitbake core-image-sato -cpopulate_sdk
time: 6m5s -> 2m34s (Reduce 57% )
$ bitbake core-image-minimal -cpopulate_sdk
time: 2m1s -> 1m26s (Reduce 28% )
$ bitbake core-image-sato-sdk
time: 10m15s -> 7m12s (Reduce 29% )
- When multilib NOT enabled:
$ bitbake core-image-sato -cpopulate_sdk
time: 4m25s -> 2m28s (Reduce 44% )
[YOCTO #8389]
(From OE-Core rev: dae4149009be722943cc7deec7f03e87b77ea59b)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The name of the directory for local source files under srctree is
'oe-local-files', not 'local-files'. Fixes a bug that slipped through
in b7ab82485e4514e07ab8a76e554da27ddc92e6c0.
(From OE-Core rev: 68cbe684fe6d8fe3a44e47ed85837d09077df6d5)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move connmans xuser-related D-Bus policy to a separate file that
xuser-account installs: This way connman does not need to depend on
xuser-account. Add policies for bluez and ofono in the same file.
(From OE-Core rev: 9f37ce18b7d79135a67474187b6119980e0130ae)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Bluez D-Bus policy is much too open and affects not just bluez but
all system services: Use upstream policy configuration instead.
This change has a chance of affecting other D-Bus services: the bug
that is fixed here may have hidden problems in other policies.
[YOCTO #8414]
(From OE-Core rev: 0f6f87c60a6ffeff6b3f53d25f4023749103e262)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modify do_install_ptest_base to run do_install_ptest and install the
Makefile irrespective of the presence of ${WORKDIR}/run-ptest. This
change allows "ptest-aware" packages to install run-ptest as part of
the make machinery.
(From OE-Core rev: 2055517d91e0c55ed108d3a6f52abd1d2c6824b2)
Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Proxies defined in the enviroment where not taken into account
on the distrodata tasks. This commit implied passing the datastore
into the distro_check library and context manager for the
urllib.urlopen function.
One way to run distrodata tasks is using 'universe' as target and the
'all' distrodata task:
$ bitbake universe -c distrodataall
$ bitbake universe -c distro_checkall
$ bitbake universe -c checklicenseall
Logs are located under TMPDIR/log
[YOCTO #7567]
(From OE-Core rev: 7d1c3470bb06e43245ccb7f067121de606506430)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enable variable history tracking so that the variables are updated in
the correct file - i.e. in the file they are already defined.
[YOCTO #7715]
(From OE-Core rev: b54796d013c562972e962126400503085281b425)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Unit tests include listing properties and creating BSP using the default kernel,
both tests done for supported architectures. Test can be manually executed with:
$ oe-selftest --run-tests yoctobsp.YoctoBSP
(From meta-yocto rev: e84fb6fe8219f874b0157bdf53489bbb5f7f81cb)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add 4.1 kernel support. Old bbapends were not removed, so user still
have the option for 3.14/3.19 kernels.
(From meta-yocto rev: f47ea7224765a3c3da3a9e0a989173b2b1950cfc)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When user wants to output the list of properties for a corresponding architecture
and the output parameter is given (--o/-outfile), there is no need to show the
properties into the console.
(From meta-yocto rev: bd133e2a6e626b4158f5a303d85205de9c66e8f2)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When user asks for help, the command should not exit with non-zero
status (failure), so removing the non-zero value on the system exit call.
(From meta-yocto rev: 98970326fb2f08e684cfc856103b2f9110c9f4fb)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you run bitbake-diffsigs against two differing sigdata files from
nostamp tasks it shows no difference despite the differing checksum.
Change the code so this shows up as a nostamp 'taint' and at least
makes the issue clearer to the end user.
(Bitbake rev: 97679d18955dadaa34f9450564e44da99984d140)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This firstly prints debug messages which show how bitbake decided to resolve
the virtual/xxx providers which is useful for debugging.
If the siggen has a tasks_resolved() method, it calls this, passing in
the mappings, allowing that to do things with the resolved names.
(Bitbake rev: d473fc84acddfd69a7207affcd89f65ea2ecf730)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building an execution task graph, bitbake does resolve virtual/xxx
namespaces into specific providers. This data isn't exported anywhere
however.
This adds a function so that runqueue can at least retrieve this data
which can then be used by the system.
(Bitbake rev: ce51a51482d0900060512b24503714a730d72266)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BBPKGS is a confusing name from before we tried to straighten out our
terminology. Its also a mostly unknown variable that isn't in wide use.
I've been asked about it recently and before people start relying more
heavily on it, I'd like to rename it BBTARGETS which better describes
what it does. Its not currently in the manuals, I'd prefer to document
it under the better name. I've not provided any migration path for the
variable since I believe its unused currently.
It allows the targets to built to be specified from a conf file in
addition to those on the commandline.
(Bitbake rev: f60c6a2172bceeb5682dcb738a02c4bf26176566)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the forked child, we may use multiprocessing. There is only one event
pipe to the worker controlling process and if we're unlucky, multiple
processes can write to it at once corrupting the data by intermixing it.
We don't see this often but when we do, its quite puzzling. I suspect it
only happens in tasks which use multiprocessng (do_rootfs, do_package)
and is much more likely to happen when we have long messages, usually many
times PAGE_SIZE since PAGE_SIZE writes are atomic. This makes it much more
likely within do_roofs, when for example a subprocess lists the contents
of a rootfs.
To fix this, we give each child a Lock() object and use this to serialise
writes to the controlling worker.
(Bitbake rev: 3cb55bdf06148943960e438291f9a562857340a3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we replace the code Setup method, we don't get the cleanup it performs
and this just resulted in failures on the autobuilder due to a stale
config fragment. Setup will call SetupLocal so this should be a safe
and easy fix to resolve the auobuilder failures.
(From OE-Core rev: 16957f5f1de0f1fb4052d5aef93ee10c893f4a38)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross reported the following waring when building edgerouter BSP:
WARNING: Section not found: .comment
The reason is that the testing of the existing sections in do_strip()
returned the wrong value. Please see the following code in do_strip():
for str in ${KERNEL_IMAGE_STRIP_EXTRA_SECTIONS}; do {
if [ "$headers" != *"$str"* ]; then
bbwarn "Section not found: $str";
fi
"$CROSS_COMPILE"strip -s -R $str ${KERNEL_OUTPUT}
}; done
The "*" doesn't have special meaning in the if string test, so it will
return true even the $str is a substring of $headers. Fix this issue
by replacing it with "! (echo "$headers" | grep -q "^$str$")".
Reported-by: Ross Burton <ross.burton@intel.com>
(From OE-Core rev: 4965f122ca67c0ff60dc60f7885db1ed9db909b4)
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We are experiencing occasional segfaults in scsi sym53c8xx driver
on qemuarm boot. There are some old discussions into the mailing
lists [1] about the scsi problem and seems to be isn't fixed.
We use virtio blk/net devices into qemuarm64 also are supported
into qemuarm so change to use it because virtio devices are the best
choice.
[YOCTO #8060]
[1] https://bugzilla.yoctoproject.org/show_bug.cgi?id=8060#c10
(From OE-Core rev: bbfb3cd06e0ff5661ef3732ebfffa74b94400cd9)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All the xml files under xslt will be installed by default, the
buildtime stuffs that Makefile, Makefile.in, Makefile.am are not
needed for target.
(From OE-Core rev: 61240e9f7e40400d49a91a0f1f0446755bd17294)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cleanup buildpaths from apu-1-config:
- remove ${STAGING_DIR_HOST} from CC, CPP ...
- set APU_SOURCE_DIR, APU_BUILD_DIR as empty
(From OE-Core rev: d61e73a37f805fd56efda1a6cfe7262356fc6274)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cleanup buildpaths from apr_rules.mk and apr-1-config:
- remove ${STAGING_DIR_HOST} from CC, CPP ...
- set APR_SOURCE_DIR, APR_BUILD_DIR as empty
* install ${HOST_SYS}-libtool to sysroot only, it's required for
building apache2 but not suitable for target.
(From OE-Core rev: 44c1a6af03ce9b45e5bfd6956062aa2b3a1be741)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
curl-config will be installed to target, cleanup buildpaths in it:
* remove ${STAGING_DIR_HOST} from CC, CFLAGS ...
(From OE-Core rev: 3e4978a534afc7fd4b82a044da8d9774cf09a4f0)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The source makes no reference to KERNELDIR any more and this make the recipe
machine specific. Simply drop the unused reference.
(From OE-Core rev: 21bad4c807acd4c596fcca8afeab737161fbbb39)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the modern checksum infrastructure, this is no longer needed
(much in the same way images no longer need this).
(From OE-Core rev: 30e83bbc3f90b4cd4caf8ad7ca847267ae50cf7e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the modern checksum infrastructure, this is no longer needed
(much in the same way images no longer need this).
(From OE-Core rev: db0ffc5a109c0b5e91f1fc67ac679bdc558c251f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The MACHINE variable is used to handle sysroot paths within one of the
patches to python3-native. In this context, it is relocation safe and
the resulting packages should not have MACHINE specific checksums,
therefore excluding MACHINE in this context is safe.
This whole setup is ugly and ideally we should come up with a better
way of handling this but at least allow a stop gap solution for now.
(From OE-Core rev: be4e6ea8a92bd90f354f8c04eade39ccce8b73d5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The way ${S} is expanded into CFLAGS means the recipe is marked as depending
on the path within which its built. We can avoid this by avoiding the expansion
which then allows reuse of the recipe from sstate.
(From OE-Core rev: 560e778589afbc5da9a20bd0fbba09b910207604)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was making deploy tasks MACHINE specific since they place output
into DEPLOY_DIR_IMAGE which contains MACHINE. On the plus side, this
was accidentally ensuring the output was placed for each machine,
on the downside it was triggering a rebuild every time for the different
checksum.
There is a better way to handle this which avoids the rebuild, see
the following tweak to do_deploy to mark it as MACHINE specific
in a different way.
(From OE-Core rev: 59800189690f887e6f3e8c3139fa6a404b76ac71)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds the markup to inform bitbake to rerun the deploy task per MACHINE.
This makes sense since DEPLOY_DIR_IMAGE contains MACHINE. Doing it this
way means the same artefact will be reused from sstate rather than rebuilt.
(From OE-Core rev: 4052e0858d72505728c2a746fac935bf281903fd)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The oprofile kernel dependency is a simple RRECOMMENDS, it therefore
doesn't have any interface constraints and doesn't need to rebuild
every time the kernel changes.
(From OE-Core rev: 0898361e4ca4b0c00d0470d130d24802f66c1064)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now the system supports virtual/xxx in SIGGEN_ variables, convert
this one to use virtual/libc instead of the hardcoded expansion which
is error prone.
(From OE-Core rev: d4a7a1b2d6bee1b6578cc7b56b6ca730ea453144)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
