Fixes [YOCTO #11411]
Added a naming convention warning to the native.bbclass description
that is similar to the existing warning used in the description for
the nativesdk.bbclass.
(From yocto-docs rev: 2ceeb5416d439197e94640229e3685ab8b87e0fb)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11600]
"configure" and "cmake" are not do_* tasks of BitBake. I updated
the formatting of these programs and removed links that were to
the tasks in the reference manual.
(From yocto-docs rev: 2605c7378f6b4b49c2e2baaf159fd2c289d83a1a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The figure that Scott Garman used for an old video cast is
much more appealing to the eye than the giant, square beast
the current manual was using. I have replaced the image.
The image is technically the same.
Because the mega-manual has to use a duplicate figure, I
put the new PNG files in the Figures directory for both the
yocto-project-qs and mega-manual books.
(From yocto-docs rev: ed64810e59110418d49fb6d3e61967fa62ab28c8)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The YP doc set was using a link to an out-dated video that
showed how to configure and run Eclipse. The video was very
old and Jessica suggested just removing it. So, I replaced
all occurrences of the link to the up-to-date appendix in the
SDK manual that provides information on the latest supported
version of the Eclipse IDE.
(From yocto-docs rev: b4af1a79078352df5558e20c0b9cfa97fa141abc)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The link to the section on how to set up Eclipse had been broken
for a while. I fixed the link so that it goes to the appropriate
section (appendix) in the SDK manual.
(From yocto-docs rev: 873c2c53f661b18936595068d75b954e07774621)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sometimes there's a need to change existing UBOOT_CONFIG setting from a recipe,
distro or local config, such as an override or even switch back to UBOOT_MACHINE.
Unfortunately, there's no easy way to override or unset flags, so using them as
an error condition is rather heavy-handed. Change those conditions to check the
UBOOT_CONFIG variable itself, not its flags.
(From OE-Core rev: b51383e5268ff33e43a39862814e065afbbd10ca)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Few of the perl scripts referring '#!/bin/sed' inside the script. But when
'usrmerge' feature is enabled this path would be /usr/bin/sed. So to satisfy
build dependency add '/bin/sed' to it's providers list.
(From OE-Core rev: 4f33950156c50aab68cbdf80fe52345eea6fb76c)
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Most of the shell scripts refer to /bin/sh inside the script. When 'usrmege'
feature is enabled, this path would be /usr/bin/sh. Hence, to satisfy build
dependency add '/bin/sh' to it's providers list.
(From OE-Core rev: 1f6c14939c8daa5e09103789c3ff5031cc888d16)
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Most of shell scripts refer to '#!/bin/{sh,bash}' inside the script. But when
'usrmege' feature is enabled this path will be /usr/bin/{sh, bash}.
so to satisify build dependency add '/bin/{sh,bash}' to its providers list.
(From OE-Core rev: 4759408677a4e60c5fa7131afcb5bc184cf2f90a)
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
meta-micro puts headers in /include rather than /usr/include in the
sysroot. ${target_includedir} means that the correct path will be used
automatically.
(From OE-Core rev: 12abcc3791592035d99064262eb3d229fa5ef88c)
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Acked-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added test case for "wic rm" functionality.
- remove file from vfat partition
- remove directory from vfat partition
(From OE-Core rev: fc42914d426ad2dad8c3026668726c003b3ab10b)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added support for removing directories using mdeltree
utility to Disk.del method
[YOCTO #11283]
(From OE-Core rev: a5fc61d8f290d370f4bc51d4e2a67a5580edb1b1)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added implementation of Disk.del method and wic_r
function that removes files from the vfat partition
using mdel utility.
[YOCTO #11283]
(From OE-Core rev: 4abf2d2643c58322d96d63d5f3ffaf52d62c6792)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added empty 'wic rm' command that does nothing.
The functionality will be added by the next commits.
[YOCTO #11283]
(From OE-Core rev: f8e42c13609c482359fbdb225fb16a45101ae9ae)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added wic_rm_help and wic_rm_usage variables to help.py.
These variables contain help content that will be used in
'wic rm help' and 'wic rm --help' output.
(From OE-Core rev: b6894538b2a426762a07c0e7b014a04f4e00266d)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added test case for "wic cp" functionality.
- copy file to vfat partition
- copy directory to vfat partition
(From OE-Core rev: cb416d1feea042bcdedc9f522d588fef2c4929bc)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added implementation of Disk.copy method and wic_cp
function that copies files/directories to the vfat partition
of the partitioned image.
[YOCTO #11283]
(From OE-Core rev: 416e4599960987f0ce31b3f16f3c6af0bf633a26)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This method copies partition image into the wic image.
It will be used in 'wic cp' and 'wic rm' subcommands
to copy changed partition back into wic image.
(From OE-Core rev: 7a7e6635e2e2ddfff2bca58c860634b7a199b0df)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed calculation of the dst file size using skip, seek and
length parameters. Current code does it incorrectly which
causes sparse_copy API to create unnecessary big output files.
(From OE-Core rev: e6d709a6382e4b913612f597e66ad07b0e351d5f)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If lenght parameter is provided to sparse_copy call
it's mandatory to check if the output file is fully
written after reading unmapped block from input file.
If it's not done then sparse_copy can write more data
than specified length.
(From OE-Core rev: 289b1767182982dfb6912e64481150697ba93e4d)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Renamed parameter offset->skip to match names of dd
parameters.
Changed affected sparse_copy calls.
Added explanation of the parameters to docstring.
(From OE-Core rev: 08e2f4e59816c5757686255b267b08cbc46fbd95)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added generic helper to use in property methods to
access commands in a lazy manner.
(From OE-Core rev: 4c1ded3ddbd04ad1640620ec1348831692a93dbe)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added empty 'wic cp' command that does nothing.
The functionality will be added by the next commits.
[YOCTO #11283]
(From OE-Core rev: f0dcf39d52185430422cb0c94c7fe99c12764acd)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added wic_cp_help and wic_cp_usage variables to
help.py. These variables contain help content that
will be used in 'wic cp help' and 'wic cp --help'
output.
[YOCTO #11283]
(From OE-Core rev: f3f0dadada1e297f2b54fa320bb817da7f755c1f)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add parser for 'wic cp' subcommand and a custom argument type.
(From OE-Core rev: df5152c834ef58036b41ad51b19eda6abecd9543)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tested 'wic ls' functionality:
- list of image partitions
- list of directory content of vfat partition
(From OE-Core rev: 3b271f6a40d7ef93fff9700dd8ac98bddd92d581)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added empty 'wic ls' command that does nothing.
The functionality will be added by the next commits.
(From OE-Core rev: ba4613469cc2c3d3433be2e2f520f4fff6b3b333)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added wic_ls_help and wic_ls_usage variables to
help.py. These variables contain help content that
will be used in 'wic ls help' and 'wic ls --help'
output.
(From OE-Core rev: 5152f993777550e5e8a420db4d1f3c4370cd1d33)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Plugin code uses boot.img file name for an image file. If there are
two partitions that use bootimg-pcbios wic breaks with an error
"file already exists: boot.img"
Made image file name unique by adding wks like number to it to fix
the issue.
(From OE-Core rev: eec6e946cce36cba304851fa4a1c1d7bfd7b0bed)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added parameter 'length' to specify amount of data
to write into destination file. This is useful when only
part of source file should be written into destination file.
(From OE-Core rev: cc44e2eb3b5027a3531e6349937a23d73313b3c6)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed bug in processing 'skip' parameter:
don't read input file if end of bmap block is less than skip
Simplified logic of positioning to the start of data inside a
partially skipped bmap block.
(From OE-Core rev: c19f78a0713c8ac9d28b78f86c6d7b96157788f0)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed code that reads /etc/mtools.conf, /etc/default/mtools.conf,
/etc/mtools and /etc/default/mtools to ensure that mtools output
doesn't depend on the global host configs.
It's still possible to use ~/.mtoolsrc config or point MTOOLSRC
environment variable to any configuration file if user want
to configure mtools.
(From OE-Core rev: 868cb638c92f650a2f0bea9669b68c1e8aebabab)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A long time ago (6 years), this seemed like a good idea. The reality is
that OVERRIDES should not be being added to hashes and if it is, it likely
needs excluding in its own right. This was a nice workaround but we need
to fix the real underlying issues now. In some cases this means excluding
OVERRIDES from the variables dependency using the vardepsexclude flag however
caution is needed to ensure this is safe.
Variable values used to construct hashes are unexpanded but the values used
are computed after the application of OVERRIDES. The important detail is if
the end resulting unexpanded value changes, not the value of the OVERRIDES
used in the construction of that unexpanded value. This is why dependencies
on OVERRIDES itself shouldn't be in the hashes in general.
The recent DISTRO_FEATURES changes adding in override mappings for them
highlighted this issue. We have some good sstate tests which are effective
at highlighting where potential issues arrive with OVERRIDES contamination
(oe-selftest -r sstatetests.SStateTests).
(From OE-Core rev: b227781f9c59a7dfe30f3f1c0dcff87e29a1689b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since the processing code for signature generation is now threaded,
use higher thread values as examples in this code for better performance.
(From OE-Core rev: f68ec7191546474f0bd688e57d2381a8e92be617)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In common with the other package handling functions, don't depend on the
value of OVERRIDES. This means when we change MACHINE, we don't have to
repackage everything.
(From OE-Core rev: 6e24b4bbe708a25c827364a2d6d979b354ab3ef2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These have values set elsewhere and this code was overwriting them leading
to odd signature issues. Append instead preserving the original values.
(From OE-Core rev: b756fd12c28d1ce3ca60b328927db996c6a52424)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"inherit" already allows inheriting more than one class in a single
statement. The same also makes sense for "include" and "require",
because then one can generate a list of files to be included
dynamically also for the case that more than one file needs to be
included.
(Bitbake rev: 8d0a76f5a595dddf16b7268bae2c00ef5f568316)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Writing .bbappends that only have an effect when some configuration
variable like DISTRO_FEATURES is changed becomes easier when allowing
"include" or "require" without a parameter. The same was already
allowed for "inherit".
Then one can write in a .bbappend:
require ${@bb.utils.contains('DISTRO_FEATURES', 'foo', 'bar.inc', '', d)}
(Bitbake rev: 8b39c6361758b96fce50a53a6dba8008cd7e6433)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The small module name was added to support run a whole suite that
has more that 3 levels in the test case name, but this broke the
behaviour for use a full test case name.
[YOCTO #11632]
(From OE-Core rev: 9ab20ceb5801bee8dd8b218b3928720da5e1d403)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The details of a test failure is upper on the unittest output
so don't log twice the actual failure.
[YOCTO #11622]
(From OE-Core rev: 0f2e81c2a4458ad0ec6bab2710952ac2c2bbf1af)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
0001-ip-Remove-unneed-header.patch is to fix build error
built with musl.
(From OE-Core rev: 2a6fe7c6c1e113d930ddc8e06717747a779b46f1)
Signed-off-by: Changhyeok Bae <changhyeok.bae@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
