Make probing of "platform" bus conditional based on PROBE_PLATFORM_BUS
variable from /etc/default/udev-cache on subsequent boots when udev
cache is used. PROBE_PLATFORM_BUS has to be set to "yes" in order to
force probing on every boot, otherwise it uses the old default behaviour
of probing it just the first time.
This is helpful on modern SoCs where most of the low level peripheral
drivers are registered on the platform bus and need to be probed to load
the necessary modules and enable the connected buses and subsystems.
(From OE-Core rev: 70a695735e0a7d14448f2f5a9986bfe105210a91)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Anything using gtk-doc will be using pkgconfig as well so
add in the dependency rather than doing it for each and every recipe.
(From OE-Core rev: 7ee05554c55607d9aa02f9a93762e2024bcd4bb0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than code which doesn't even work properly when cross compiling,
lets just use pkg-config instead. Its a little simpler.
(From OE-Core rev: b550572bdad318aed02230496721430eec89c937)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For the meta-mingw layer, we need to process alternative SDK_OS, since this
is not a Linux based OS.
(From OE-Core rev: b31e015d2e379c24610948d345c5970545887468)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While we're not going to package the libgcc component as part of the SDK,
we do need to generate it to get the unwind, and quadmath headers. Without
this change it is not possible to build eglibc or other components that
require these headers with the SDK toolchain.
(From OE-Core rev: e67b24401a366b20644510703c7140be975869ea)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The variable was only partially implemented, and the part that was there
was named incorrectly to, missing the 'TASK' piece.
(From OE-Core rev: d0cb34cfe9a51fd8bc1e6e28c8eda60a25adc1ec)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The meta-mingw layer attempts to change the SDK Suffix, but the rpm
packaging had a hard coded reference to _nativesdk.
I did a quick scan for other hard coded entries and did not fine any
more.
(From OE-Core rev: 0d3f7a753f17fa8c455f64e3df3259ef1887fd8a)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will allow for easier configuration of curl for SSL vs gnutls
[YOCTO #6329]
(From OE-Core rev: 6a8144390eb2dee6e1baf7be75cffcacbb247002)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes to debian/copyright:
Update to "Copyright: Mozilla Contributors" for mozilla/{certdata.txt,nssckbi.h}
Backported on additional patch from ca-certificates tree
[YOCTO #6454]
(From OE-Core rev: 3af33d60f03afb19543247b5350137ff3a7ee7e0)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated LIC_FILES_CHKSUM to focus only on header section
no license changes
(From OE-Core rev: 2832cb12b31f171e06b9bdd4e496682813301baf)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some boards are configured to read a script or environment file as part
of the u-boot boot sequence. This file, typically called 'uEnv.txt' or
'boot.scr', would be deployed alongside the u-boot binary. If a recipe
uses this u-boot.inc, such a file can be deployed by setting the optional
UBOOT_ENV parameter and including the file in the SRC_URI. For example:
SRC_URI_append_overo = "file://uEnv.txt"
UBOOT_ENV_overo = "uEnv"
(From OE-Core rev: 1506c40c93651356b9fe2f7184b5e26f99e22686)
Signed-off-by: Ash Charles <ashcharles@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some packages put their CMakeLists.txt file in a subdirectory, so assuming that
it is in ${S} won't work.
Restore OECMAKE_SOURCEPATH (defaulting to ${S}) so that the location of
CMakeLists.txt can be set if required.
Based on a patch by Miroslav Keš <miroslav.kes@gmail.com>
(From OE-Core rev: 2c23d7ab913a636aa0ab6a6e899cf6211d1e2714)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The recent bintuils patch update breaks on older gccs such as CentOS 6.
Backport a patch to address this.
(From OE-Core rev: 76f65e73081f52cea718ef164f9d1d7a5c65d537)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is fixed by
commit 4199e3b8669d0a36448687850374fdc2ad7240b6
Author: Alan Modra <amodra@gmail.com>
Date: Wed Jan 15 21:50:55 2014 +1030
non-PIC references to __ehdr_start in pie and shared
Rather than hacking every backend to not discard dynamic relocations
against an undefined hidden __ehdr_start, make it appear to be defined
early. We want __ehdr_start hidden before size_dynamic_sections so
that it isn't put in .dynsym, but we do need the dynamic relocations
for a PIE or shared library with a non-PIC reference. Defining it
early is wrong if we don't actually define the symbol later to its
proper value. (In some cases we want to leave the symbol undefined,
for example, when the ELF header isn't loaded, and we don't have this
infomation available in before_allocation.)
So replace the existing patches with this one.
(From OE-Core rev: db37534c412ff3f1460687611060b3c4b3f95a04)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Use optparse instead of getopt (less code & automatic help)
* Change help text / output to use "recipe" instead of "package"
* Print something to indicate the script is still gathering information
Note that the long options have been renamed as appropriate.
(From OE-Core rev: 0ab4da8667cdf027d841e04ed5a35ddd45ad494a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These are generic flags and shouldn't be listed in the output of this
script.
(From OE-Core rev: 0f8b16c5ea78f1d48b45cef7a317f8a307c48ebe)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Several of these scripts were using duplicated code (and slightly
different methods) to find the path to bitbake and add its lib
subdirectory to the Python import path. Add some common code to do this
and change the scripts to use it.
Fixes [YOCTO #5076].
(From OE-Core rev: 0b5e94e168819134dcda0433c8ae893df4ab13ce)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When call isohybrid with option '-u', it overflows on a 32 bits host. It
seeks to 512 bytes before the end of the image to install gpt header. If
the size of image is larger than LONG_MAX, it overflows fseek() and
cause error:
isohybrid: wrlinux-image-x86-64-20140505110100.iso: seek error - 8: Invalid argument
Replace fseek with fseeko to fix this issue.
(From OE-Core rev: 41bd9dbf6f3e0add6a9e2cb20cfcbff44d785ea4)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add MLPREFIX to depends flag to ensure the correct gummiboot is
dependended upon.
(From OE-Core rev: 9ed2b77aafe5bcd57da56377e6e58dae0c1fcfaf)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add MLPREFIX to depends flag to ensure the correct grub-efi is
dependended upon.
(From OE-Core rev: b62bf9e1cb8670901cfc37b1cd1822703ebdc000)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add MLPREFIX to depends flag to ensure the correct syslinux is
dependended upon.
(From OE-Core rev: c8dc421ea18bb7a810501ab6d07efa9c8f6d6eb9)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a partition such as /tmp mounted on a volatile directory which create
by script populate-volatile.sh from initscripts, it will show errors.
In /var/log/boot, error message:
Thu Jun 19 05:39:09 2014: bootlogd.
Thu Jun 19 05:39:10 2014: rm: cannot remove '/tmp': Device or resource busy
Check volatile directories and if it is be mounted then don't force make
it as a link.
(From OE-Core rev: cc4b0936c7a6a1563dc88d62d8c9020791eaa446)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current substitution to package names is not correct, its original
purpose is: replace "mesa-" with "mesa-dri-", in which process the
"mesa" package is left out, this leads mesa package to announce to
conflict with itself, and therefore cause build failures when multilib
mesa are being added to rootfs.
Changing the replacement pattern to without a '-' suffix will fix it.
(From OE-Core rev: f02e0ae803b7a37b410c8487916331cdcae98cf3)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow the user to specify a symlink as the host device. If a link is
used, mkefidisk will now dereference it and use the link target when
looking for sysfs information.
(From OE-Core rev: 67bbfac55555c4e35ed9a84409aedb9b278b3de9)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The main new features are:
* ss gets more attention
* Support for HHF qdisc
* Updates to bridge command
* Lots of vxlan related changes
* Lots of little corrections and build fixes.
(From OE-Core rev: 873bdf8ba578aa91f29cd19e9b235e81f09e156c)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As per change in the oeqa/targetcontrol.py's BaseTarget class, changing the use of get_image_fstype() to match_image_fstype().
Also because there is no longer a value check done by the target controller's match_image_fstype() method, we have to do one here.
+ one helper comment for the get_controller() method.
(From OE-Core rev: 6d8366bd6145bf3ad484ed9fe4b1ddb4c499f72b)
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because we used a bb.fatal call inside the get_image_fstype classmethod, this caused problems when accessed without instantiating the object with a valid bb environment.
Separating the matching part of the classmethod(that is usable by outside scripts) from the check of the resulting value.
The matching is done within a new classmethod and the latter keeps the old method name and internal functionality, this way we don't have to change any other target controllers code.
(From OE-Core rev: 50ddd5d0149666ad60133d8eb6cc789c5b97e5e4)
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
add control for generic grub pc via serial line
Implementation [YOCTO #5615].
(From OE-Core rev: 01968e9244d0cf3deb1ec5cfb8e562d3b364add6)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
_EOF marker was not used properly
(space left before end of line).
(From OE-Core rev: 913fd224499c57c7596bd49e1eec5f570c3edf68)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Overwriting of /etc/mtab would fail as below if the /etc/mtab link already
exist during installation phase, this patch fix this problem by checking
existance of the link before try to overwrite it.
Error message during installation if the /etc/mtab exists:
"cat: /proc/mounts: input file is output file"
(From OE-Core rev: 5cd96e28825d345650be878d4b7be4fea2996839)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For automated hardware testing, boot process control
via serial interface is needed. As such, in grub, serial
line support is added upon testmaster image install.
Also add a specific timeout to automatically start
the master image upon start of testing phase.
Tested on multiple hardware targets without issues.
(From OE-Core rev: 219228805a4d5d822894c8f6c2526e1b9a8609ff)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Close the definition list before adding the notification, and
restrict the notification width to avoid uncomfortable line
lenghts.
(Bitbake rev: b82f724c271c43218dc28440219adcea968e2a26)
Signed-off-by: Belen Barros <belen.barros.pena@intel.com>
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Display message if no images are generated for a target. This
commit was amended to have more conditions for displaying the
message.
[YOCTO #6094]
(Bitbake rev: ac1911eb857f4759ed085c8a4fc4b47cefafcd7a)
Signed-off-by: Farrell Wymore <farrell.wymore@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
