Fix an issue where two tests have the same name with one overwriting the
other.
(Bitbake rev: da812d938fd79e2cc7bdf355ccf5b0f9ead684c4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add tune include for armv8.4a. This adds support only for bare armv8.4a
(and for crypto extension). There is no support for additional
instructions added by architecture extensions (except the main crypto
extension support).
(From OE-Core rev: 39743abada4a2459c74831aa78930de5461adee2)
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Atheros AR3011 Bluetooth devices require special ath3k-1.fw firmware
file. Package it separately from the main linux-firmware package to
allow deploying this firmware on embedded devices.
(From OE-Core rev: a12a5606f4c7003d9a90c493380c656ee557dea5)
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
According to the WHENCE file, some a3k firmware files are licensed
under the special ar3k license, while others are licensed under the more
generic Atheros license. Document this by adding extending the
LICENSE:${PN}-ar3k and depending on both of them.
(From OE-Core rev: 8e651814af706285d64b532095fcd6f5f02629ba)
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The do_kernel_configcheck task requires a meta directory, normally
set by ${KMETA}. The meta directory is taken as a relative path
from ${S}:
outfile = "{}/{}/cfg/mismatch.txt".format( s, kmeta )
However, when checking for the presence of ${KMETA} the current
working directory is searched. This will almost always fail and
"kgit --meta" is used instead. If the user does have a path in
their current working directory that matches the ${KMETA}
variable but the path is not present within the kernel source
directory, the build will fail if it tries to write config errors/
warnings to that path.
If ${KMETA} is not set, the same problem exists with the hard-coded
"meta" directory.
Fix these issues by checking for ${KMETA} within ${S} rather than
the current working directory. Additionally, drop the hardcoded
backup directory "meta" as it hasn't been functioning and
probably has no users
(From OE-Core rev: f4a3e80a4a6f4f709d09940dcaf45b2b00654496)
Signed-off-by: Russ Dill <russ.dill@nikolamotor.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The files in /sysroot-only are intended to make it into the
recipes sysroot output, but not into the package. However, if
do_package is run before do_populate_sysroot, the files are
removed.
Use a smaller hammer to avoid copying the files into the package so
they are still around when do_populate_sysroot runs.
(From OE-Core rev: 493145c6f1bc92ab2b7a23e181641b09df87c9ff)
Signed-off-by: Russ Dill <russ.dill@nikolamotor.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The switcher expects URL subpath to match the "release" used by sphinx
to build the documentation. Branches, however, are put in a subpath
after their name (e.g. dunfell) while sphinx sets the "release" to
X.Y.999. This means the switcher cannot replace correctly the path to
switch between releases/versions.
Let set_versions.py inject the list of release names into the
switchers.js.in file so it can check whether the subpath is one of the
release names in which case it needs to be stripped.
Cc: Quentin Schulz <foss+yocto@0leil.net>
(From yocto-docs rev: 5ef3d129b8d0d8ae98a694103930988a46285525)
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This array only contains versions that can be selected through the
dropdown menu for switching between supported versions.
Therefore, let's rename it to switcher_versions to make its usecase
clearer.
Cc: Quentin Schulz <foss+yocto@0leil.net>
(From yocto-docs rev: 5c3d67751bf3f572a0788d3a4734b80e3453d084)
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Branches are identified by their .999 version suffix which means they
will never be matched in the forloop above this git context. Therefore,
branches will match the condition. However, branches are not necessarily
obsolete (e.g. dunfell, honister and kirkstone today), so let's mark as
obsolete the branches which are from obsolete releases.
Old tags of currently supported releases are not defined as obsolete but
outdated, therefore using the series to which they belong like it is
done for branches is enough for obsolescence detection.
Cc: Quentin Schulz <foss+yocto@0leil.net>
(From yocto-docs rev: 7181a432da18b47608784363d243ea39b80be1ed)
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
master branch of Bitbake is now located at docs.yoctoproject.org/dev
instead of docs.yoctoproject.org so let's update the switchers and
set_versions.py to reflect that change.
Cc: Quentin Schulz <foss+yocto@0leil.net>
(From yocto-docs rev: 18338292d99ed236e2bac6e73a5152ef11c4a9e5)
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
temporarily override SRC_URI which is hard-coded in xorg-app-common.inc
since new versions of packages use a new compression format - .tar.xz
(From OE-Core rev: 712552b5cc427d7be1258c45886de9b57f7272c9)
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
temporarily override SRC_URI which is hard-coded in xorg-app-common.inc
since new versions of packages use a new compression format - .tar.xz
(From OE-Core rev: 7ac5e224fe55db17651988435a569a8a25b6b09f)
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
temporarily override SRC_URI which is hard-coded in xorg-lib-common.inc
since new versions of packages use a new compression format - .tar.xz
License-Update:
file type changed from "ISO-8859 text" to "UTF-8 Unicode text".
(From OE-Core rev: 925db25e62341bb2b8d5eded0aa9b220433a93d1)
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With latest gstreamer version pkg-config able to find header
path with msdk enabled.
Drop this patch as its not require anymore.
(From OE-Core rev: eaa3b31247b4d3cc47428f4d80ae31f232e344d4)
Signed-off-by: Naveen Saini <naveen.kumar.saini@intel.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These devices are historical, modern Linux will just use the USB
devices, and occasionally the init of these devices fails:
atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
psmouse serio1: Failed to reset mouse on isa0060/serio1: -5
Explicitly add a USB keyboard to go with the USB tablet, and disable the
i8042 entirely.
[ YOCTO #14718 ]
[ YOCTO #14743 ]
(From OE-Core rev: c01f47003f34b9ad2fe3d17e1ead84c27ee1e57d)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backport a patch from upstream (will be in qemu 7.0) to add an option to
disable the legacy i8042 support (AT keyboard, PS/2 mouse). These
devices are very historical and modern Linux environments use USB anyway.
(From OE-Core rev: d73e4fcfc9ca4aab25f7751ba17974a839d6340f)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a ptest for libgpg-error to core-image-ptest-all. Avoid refreshing the
Makefile in qemu as this would fail and is not needed. All tests passed on
a trial run.
(From OE-Core rev: 51dd52604eb73c55fc32a99c3208653f27ba4091)
Signed-off-by: Simone Weiss <simone.weiss@elektrobit.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This module contains legacy cipher suites from libcrypto.
We should not need to include base package because we want
to use this part of libcrypto.
(From OE-Core rev: 1537ebc3f6ae2aec9a3864b03704ab4dbc0e971b)
Signed-off-by: Peter Marko <peter.marko@siemens.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
0001-gptcurses-correct-ncurses-6.3-errors.patch
removed since it's included in 1.0.9.
Changelog:
===========
- Added support for aligning partitions' end points. This feature affects the
default partition size when using n in gdisk; it affects the default
partition size in cgdisk; and it's activated by the new -I option in sgdisk.
See the programs' respective man pages for details. This feature is intended
to help with LUKS2 encryption, which reacts badly to partitions that are not
sized as exact multiples of the encryption block size.
- Added several new partition type codes:
FreeBSD nandfs (0xa506)
Apple APFS Pre-Boot (0xaf0b)
Apple APFS Recovery (0xaf0c)
ChromeOS firmware (0x7f03)
ChromeOS mini-OS (0x7f04)
ChromeOS hibernate (0x7f05)
U-Boot boot loader (0xb000)
27 (!) codes for Fuchsia (0xf100 to 0xf11a)
- Added the ability to build sgdisk and cgdisk for Windows.
- Added a check for too-small disks (most likely to be an issue when trying to
use a too-small disk image); program now aborts if this happens.
- Removed stray debugging code that caused partNum is x to be printed when
changing a partition's name with sgdisk.
- Fixed build problems with recent versions of ncurses.
- Fixed bug that caused cgdisk to report incorrect partition attributes.
(From OE-Core rev: a0e6ee2b34ae21764f8a5a649916488902016395)
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ourseries can be an active release and therefore shouldn't be marked as
obsolete. By adding ourseries to activereleases, it is impossible to
know if ourseries is actually an active release or not. Instead let's
loop on the active releases with ourseries too (only if it's not active
release, otherwise it'd appear twice).
Fixes: 6f40ef56054ec "docs: set_versions.py: add information about obsolescence of a release"
Cc: Quentin Schulz <foss+yocto@0leil.net>
(From yocto-docs rev: f16b633211b97b2cdf2c65d83c99cd3853d2bb5c)
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
versions array is supposed to store the latest version of all active
releases. However, in the loop it is reassigned and therefore, the check
on whether our version is already in the versions array will always
return false (except for the latest version of the last active release)
and write our version again in the list.
By using a local variable for the logic instead of versions array, the
check now works properly.
Fixes: f2b069be8c307 "set_versions: Various improvements"
Cc: Quentin Schulz <foss+yocto@0leil.net>
(From yocto-docs rev: 36a088c8c99dd37f5ca07ec8f90f2c51ef8b36f2)
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When gos internal linker is used, it uses hardcoded paths to the
interpreter (dynamic linker). For x86_64 this hardcoded path is
/lib64/ld-linux-x86-64.so.2, but yocto's default dynamic linker path
is /lib64/ld-linux-x86-64.so.2.
Most of the time, the internal linker is not used and binutils linker
sets the correct path, but sometimes the internal linker is used and
the resulting binary will not work on x86_64.
To ensure the path is always correct, pass it to the linker.
(From OE-Core rev: 6b54215074d7f3dbba07f096f16b9c0acf51527c)
Signed-off-by: Joerg Vehlow <joerg.vehlow@aox.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is for improving reproducibility to trim absolute paths as these
recipes do not inherit go bbclass where it would be set automatically
(From OE-Core rev: 365dae4e47b956b39fb62d9c6dcb917a11b37cba)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This overcomes the linking errors e.g.
| /usr/lib/go/src/cmd/go/internal/base/base.go:110:(.text+0x60fef8): relocation R_MIPS_26 against `a local symbol' cannot be used when making a shared object; recompile with -fPIC | /usr/lib/go/src/cmd/go/internal/base/base.go:110:(.text+0x60ff0c): relocation R_MIPS_HI16 against `a local symbol' cannot be used when making a shared object; recompile with -fPIC
(From OE-Core rev: 4b379e94ea6d5b96245c8724689209b44cace562)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is local invention which is no longer needed, pie-mode works good
now a days to build go for target
(From OE-Core rev: 118411a565fb39df4bbae2a0ef2b25f03607a3a5)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1.18 is a major release brings in long awaited new features e.g.
generics, fuzzing
Detailed list is here [1]
Drop patches to manipulate multiword CC/CXX as go has fixed it
differently [2]
Drop cgo portion of patch to hack hash generation logic
either we should find a way to not use it or redo it,
in current form its not upstreamable and its
altering core features of go compiler, it can not be maintained as is
Do not emit linkinfo into the actionID
Drop ignoring CVE-2021-29923 its already addressed in go >= 1.17
[1] https://go.dev/doc/go1.18
[2] https://groups.google.com/g/golang-codereviews/c/fUhCbpYG7HE
(From OE-Core rev: 1a99cc2eed34434d75b2f53af1616ad79eef0906)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Just to keep things standard and clear, use the new INIT_MANAGER variable
in the main distro config. This matches the default config with the addition
of some DISTRO_FEATURES tweaks.
(From meta-yocto rev: 07556802447a157bfdae842354c064e50ae09d42)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also correct two comments, and move slash_re from _revision_key() to
the module top level (together with the new sha1_re).
(Bitbake rev: 98cad8636e9c82bc40a033bb83633ec994758eb0)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During parsing, Python raises
RuntimeError: dictionary changed size during iteration
in getRuntimeProviders, if you happen to have a recipe
with an explicit RDEPENDS on a dynamic package containing a '+'
character, such as 'gtk+3-locale-en'.
This is because we're using the modified pattern as the
key into the packages_dynamic dict to append to rproviders,
and since that key doesn't exist, the dict is getting modified
to add a new, empty, entry for it. So even without the runtime
error, we'd be generating an incorrect result.
Fix this by using a local variable for modifying the pattern
and using the original key to retrieve the value on a match.
(Bitbake rev: 07de375c3e57f17ab7b47569186f24ecd9896825)
Signed-off-by: Matt Madison <matt@madison.systems>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
