The ajax query that fetches the directory data on an expand request
is now returning the response data already in an object form. so the
parseJSON() call is no longer needed (and is currently returning a
parse error).
[YOCTO #7810]
(Bitbake rev: e237d231d52ef71e0f369d1af34f214e6c2359f2)
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow any listeners for this event (such as buildhistory.bbclass in
OpenEmbedded) to find out if the build was interrupted rather than
completing normally. The value will be 0 if not interrupted, 1 if
interrupted waiting for remaining tasks to complete, or 2 if force
interrupted (stopping any running tasks immediately).
(Bitbake rev: df2b778efd2ecc48f6c5a3ed446f6459f2250035)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Change the Toaster screenshot we use in the landing page
to make sure it cannot be confused with the real interface.
Also, remove the MANAGE conditional we were using to set the
screenshot. We no longer have different applications for the
two modes, so it should no longer be needed.
[YOCTO #7743]
(Bitbake rev: 099c1af869a6cd52a2cdb87465a05893d60c8f38)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Systemd serial-getty is failing because dev-tty ends with timeout, systemd
uses a default timeout of 90 secs that it's reached on AB's production environment
due to high I/O loads (nfs).
When use QEMU is used without KVM support, the machine code is executed by TCG
(software code execution) that is dependent on devices layer and causes locks
between TCG/Devices increasing the machine code execution time [1].
QEMU don't support configuration of device timeout always uses a default one that is
90 secs, so the next patch increases the device timeout to 240 secs [2] in order give
enough time to get devices ready. It ONLY applies on QEMU machines.
[YOCTO #8141]
[1] http://blog.vmsplice.net/2011/03/qemu-internals-overall-architecture-and.html
[2] https://bugzilla.yoctoproject.org/show_bug.cgi?id=8141#c10
(From OE-Core rev: 5196d7bacaef1076c361adaa2867be31759c1b52)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Exclude all versions of gcc-source from world builds so that:
bitbake -c <stage> world
will work. gcc-source deletes most bitbake build stages
since it is a source-only package.
(From OE-Core rev: 0eda7b4d889b926ab97d60fcbb1c0d12d730f8ea)
Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Increase sparse image block size when ROOTFS_SIZE is smaller than
the minimum needed for ext4 to fit into it.
[YOCTO #7664]
(From OE-Core rev: 6938791ff97a23430afb4aa16d71aa8729a12ead)
Signed-off-by: Alex Franco <alejandro.franco@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A few short fixes to splitting/iteration done over package lists
in license.bbclass, package_manager.py and rootfs.py.
[YOCTO #7664]
(From OE-Core rev: a902e98c5938f52ec960e0518e0ceaf8f5ee610c)
Signed-off-by: Alex Franco <alejandro.franco@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replace the previous shell magic with a Python function to parse the readelf
output, and fix the package names to include the lib32- prefix.
[ YOCTO #8219 ]
(From OE-Core rev: c51d24710b48eb3930edb8c661100705c6203e78)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since the qemu for aarch64 must use a virtual console for the second
serial port rather than emulating actual hardware, make sure the correct
device is specified so that a tty is actually started.
(From OE-Core rev: 5b720a69f0d181ab2de6032a6e3f5a0ee4a14302)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On qemuarm64 the second serial port in SERIAL_CONSOLES will be hvc0.
Since that doesn't have tty in the name, a correct label didn't get
added to inittab.
This change makes both names with tty and without work.
(From OE-Core rev: 4cca92b34defae425929d92671edde621f8a5e80)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bind doesn't ship shared libraries only static libraries, so the default
dependency on PN from PN-dev is pointless and means that an image with bind-dev
installed (via dhcp-dev's automatic dependency) ends up with named installed and
started on boot which is rarely intended.
If and when we ship bind's shared libraries we should ensure that the libraries
go into a separate package.
Also remove an old comment about --enable-exportlib which isn't supported by
configure anymore.
[ YOCTO #8216 ]
(From OE-Core rev: f28757a4b89447ea528cba987f0396b92aa0bbfe)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If this is not the case, sometimes the additional tcpserial will be
enumerated as ttyS0, which is not what we want. Because then it would be
the console, and qemurunner would not log things properly.
(From OE-Core rev: c71309616a3247cfab969b74d8642ff0bf9b6500)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch fixes the ability to correctly identify syslog's package
name for the built image. It is derived from modifying oeqa/oetest.py
for [YOCTO #8170]
(From OE-Core rev: 74d02c942414a193a01367c0a32bf91a3329a8d4)
Signed-off-by: Costin Constantin <costin.c.constantin@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modified hasPackage() to split the content of pacakage manifest file
in containing lines and search at the begining of each line the
existance of the needed pkg.
[YOCTO #8170]
(From OE-Core rev: f07045fcae859c902434062d1725f1348f42d1dd)
Signed-off-by: Costin Constantin <costin.c.constantin@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On a nonblocking socket an exception can be generated for the EAGAIN
and EWOULDBLOCK errnos. Since these aren't actually errors make sure to
retry rather than bailing out.
(From OE-Core rev: 2f5cbfee0ab1189fbb83f0e785d79c8d123fccc2)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Before this change on a test failure an exception would be generated due
to runqemu being killed before the logging thread which was on the other
end of the socket.
The exception was actually correct saying there was no data on a socket
marked readable, but this was because the qemu process was killed before
the listener thread.
(From OE-Core rev: 6497fddf7f6c4a59e16dab4a9daeb3614a61a8dc)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This means we can use this as a test to enable certain autobuilder tests
such as testsdk.
(From OE-Core rev: dbfb2efcd7240a0a6a413f1b37c399b66fa79ca9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We're importing the server and UI modules in order to check they are
valid, but it turns out that that has some nasty side-effects. We don't
actually need to do this except when --help is passed or the module
doesn't exist, so rearrange the code so that we only do the module
listing in those two cases.
Additionally, let's just go ahead and catch all errors on import; we
really don't care to have them cause a failure now.
(Bitbake rev: c9dc6d9c86e8b887821a6d00346bd0b09e1da97c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The option was added so that the qemurunner could start a second tcp
serial port without adding machine conditional logic to qemurunner.
The issue that made this necessary was that when "virt" is passed to
qemu-system-aarch64, the normal mechanism for specifying a tcp serial
port does not work. This is because the hardware for the "virt" machine
is hardcoded in the device tree blob and the addition devices must be
virtio devices.
So runqemu can specify virtio for qemuarm64 whereas it seems all other
qemu machines work with the "-serial tcp*" option.
(From OE-Core rev: 849d65d55e4df5fa443b2cb7b4cee23913fc9d5a)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
qemu can freeze and stop responding if the socket buffer connected to a tcp
serial connection fills up. This happens of course when the reader of
the serial data doesn't actually read it.
This happened in the qemurunner code, because after checking for the
"login:" sentinel, data was never again read from the serial connection.
This patch solves the potential freeze by adding a thread to continuously
read the data from the console and log it. So it also will give a full log
of the console, rather than just up to the login prompt.
To simplify this patch, another serial port was also added to use for the
sole purpose of watching for the sentinel as well as being the interactive
serial port. This will also prevent the possibility of lots of debug
data on the console preventing the sentinel value from being seen due to
interleaved text.
(From OE-Core rev: 2da3fee6b6d9f4dd4c4cb529f4ba393c20aa0f13)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
So that create_socket() can be called more than once to create sockets,
it now returns the socket and port rather than setting class variables
directly.
create_socket() now only uses exceptions for errors, not the return
value from the function.
(From OE-Core rev: b46d83a848cf23c7f639a6ebafbd0f2c1413584a)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bootlog and qemusock variables were set in the class as part of the
create_socket() routine. However those variables are never used outside
of the same function and thus serve no purpose as class variables.
This initializes those variables near where they are used.
(From OE-Core rev: 829a6e521f15bae93d5f1a02dc67bc56a8c606c8)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Pull package from meta-oe to oe-core:
meta-oe commit: bce4dba5546480c8e43c6442959ac7d0a4ef32f6
The libcap-ng library is intended to make programming with posix
capabilities much easier than the traditional libcap library.
It's not a replacement to libcap, it provides different library
(libcap-ng.so) while packages explicitly look for libcap.so. It
could be used by qemu, util-linux, libvirt, audit ...
With adding it to oe-core, the copies from following layers could
be removed:
* meta-oe, meta-selinux, meta-security-framework ...
(From OE-Core rev: ad509d7644803ff9386affefe2ec1a3664027074)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ackage from meta-oe to oe-core:
meta-oe commit: 9cc54e10efa5ca70d9980f833a8e5a310e5ad21d
It's required for libcap-ng to build python bindings.
With adding it to oe-core, the copies from following layers could
be removed:
* meta-oe, meta-selinux, meta-intel-iot-middleware ...
(From OE-Core rev: 66923c6776da13bd4513a73c3f7c5e60d74eb0f3)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
XvMC extends the X Video extension (Xv) and enables hardware rendered
motion compensation support. In a test build enabling this feature
increased the size of the xf86-video-intel package from 1386841 to
1847154 bytes.
When we enable the xvmc feature in xf86-video-intel we see the
following QA issue reported:
QA Issue: xf86-video-intel rdepends on xcb-util, but it isn't
a build dependency?
We fix this by ensuring the build dependencies are set correctly when
the xvmc feature is enabled.
(From OE-Core rev: 9f625c2e6cc5c42d047ad33d5354522c18f2d6b7)
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The rpm process replace all the "%name" in the spec file by the name of
the package. So, if the package is composed of some files or directories
named "%name...", the rpm package process failed.
Replace all "%" present in files or directories names by "%%%%%%%%" to
correctly escape "%" due to the number of times that % is treated as an
escape character. Jeff Johnson says this is the Right Thing To Do.
[ YOCTO #5397 ]
(From OE-Core rev: 5ed1c7f556df3fafd45d493010cc0bbe74d05ebd)
Signed-off-by: Sébastien Mennetrier <smennetrier@voxtok.com>
Signed-off-by: Michaël Burtin <mburtin@voxtok.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having disabled phonon by default in Qt4 we need to ensure this
packagegroup is still buildable when it's not available.
(From OE-Core rev: 9f1ce43fa1bdd3952ccf510cb648ebe9e0e8aac2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* PR = "r0" is the default, no need to set it (and most people won't
need to set it anyway with the PR service)
* PV = "0.1" is already set by virtue of 0.1 being in the filename
(From OE-Core rev: 91b323526427f67a8982c7b090e505aaf810d4e7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I'd somehow missed the existence of fail() when I wrote these. It's
preferable here so you don't get the somewhat useless "false is not
true" message in the case of failure.
(From OE-Core rev: 173a5896fff57136e1f15e15f90961416aadde94)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have "recipetool create" (or "devtool add" which wraps it) instead
which works pretty well now, is written in Python and thus can call
into BitBake/OE code easily, and can do things that create-recipe can't;
any future improvements should go into recipetool and therefore I think
we'd rather people used it instead.
(From OE-Core rev: df0ef260f36df3993377196962eb6d52ab36b38c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Nobody sets this. The orc packageconfig already does everything we need.
(From OE-Core rev: acf49ddce2234da3cc1c81e29ca675010ba7814b)
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this, gstreamer configure scripts may choose the host orcc instead
(From OE-Core rev: c5b772e2be10cca196a7a63f0176ce3e38311d02)
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otherwise QA check will fail.
Some schemas in gsettings-desktop-schemas (such as proxy and locale)
are still using deprecated paths, as of 3.16.1. This causes warning
messages, and meta/lib/oe/rootfs.py complaints about them.
(From OE-Core rev: 751c8388c7f7584460bbf0c0f1d61e47372717af)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
cmake expects target architecture strings in the format of uname(2),
which do not always match TARGET_ARCH (e.g. powerpc vs ppc).
(From OE-Core rev: 7c61d022aa9bbba3c2f8a2df46eeb19e2772c89a)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upstream, xz has been the only format for some time now, so let's
make it the default and adjust recipes that package old stuff.
(From OE-Core rev: 0f9ea90dde8f63aace19531e066580e41bf3d7cc)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
finitel is not implemented in uclibc and since its not posix, it wont be
implemented in future too.
Fixes perl 5.22 build error
perl/5.22.0-r0/perl-5.22.0/sv.c:12135: undefined reference to `finitel'
| collect2: error: ld returned 1 exit status
(From OE-Core rev: 4c76dd4ee10e3be147951824a4c082f271f90e62)
Signed-off-by: Yen-Chin Lee <coldnew.tw@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We redefine LD to point to ld.bfd when building kernel, which works in
most cases since kbuild system calls out for bare LD most of the time,
however some of newer kernels e.g. 4.1+ have some code added which can
call gcc directly to do the linking job e.g. arm vdso code
This causes build failures when we have configured the default cross
toolchain to use gold linker as default. Errors like
BFD: arch/arm/vdso/vdso.so: Not enough room for program headers, try
linking with -N
| arm-angstrom-linux-gnueabi-objcopy:arch/arm/vdso/vdso.so[.hash]: Bad
value
start happening.
With this patch we force gcc to choose bfd linker as well
(From OE-Core rev: 5724e4d245f142ac6fb1ea211503fd220683354d)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
