Integrating the following commit(s) to linux-yocto/.:
1/1 [
Author: Mark Hatle
Email: mark.hatle@amd.com
Subject: arch/riscv/tunes: Implement RISC-V ISA selection
Date: Wed, 18 Jun 2025 18:20:08 -0500
You need to first clear (risc-isa-clear) the defaults, and then apply the
ISA components starting with the base ISA and extensions (riscv-isa-...).
Only ISA extensions available in TUNE_FEATURES are currently
implemented.
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@kernel.crashing.org>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
]
(From OE-Core rev: 2080c8f215ca71d526c39a87d3307e4c65476a39)
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating linux-yocto/6.12 to the latest korg -stable release that comprises
the following commits:
e03ced99c437 Linux 6.12.33
80fe1ebc1fbc Revert "drm/amd/display: more liberal vmin/vmax update for freesync"
d452b168da17 dt-bindings: phy: imx8mq-usb: fix fsl,phy-tx-vboost-level-microvolt property
1ed84b17fa9b dt-bindings: usb: cypress,hx3: Add support for all variants
eb2d5e794fb9 thunderbolt: Do not double dequeue a configuration request
b4fac3f172f2 usb: usbtmc: Fix timeout value in get_stb
985961dd2688 serial: jsm: fix NPE during jsm_uart_port_init
e428b7e205ed Bluetooth: hci_qca: move the SoC type check to the right place
4490c7951898 usb: typec: ucsi: fix Clang -Wsign-conversion warning
1a51004aa046 USB: serial: pl2303: add new chip PL2303GC-Q20 and PL2303GT-2AB
393ad978388e usb: storage: Ignore UAS driver for SanDisk 3.2 Gen2 storage device
23179d009cf5 usb: quirks: Add NO_LPM quirk for SanDisk Extreme 55AE
a347664312be Revert "cpufreq: tegra186: Share policy per cluster"
0c60158ff14d block: fix adding folio to bio
3c4fed940db2 PCI/ASPM: Disable L1 before disabling L1 PM Substates
4685153b121e accel/ivpu: Update power island delays
f4deea418499 accel/ivpu: Add initial Panther Lake support
6b482b16f32e rtc: Fix offset calculation for .start_secs < 0
a6a55fe660f8 rtc: Make rtc_time64_to_tm() support dates before 1970
f28fae36bad3 Documentation: ACPI: Use all-string data node references
32b7c46c4dae acpi-cpufreq: Fix nominal_freq units to KHz in get_max_boost_ratio()
614456f1a0fe pinctrl: armada-37xx: set GPIO output value before setting direction
f49c751d6000 pinctrl: armada-37xx: use correct OUTPUT_VAL register for GPIOs > 31
bf49527089ec f2fs: fix to avoid accessing uninitialized curseg
db758487f3dd tracing: Fix compilation warning on arm32
(From OE-Core rev: f51d876fdf243ec4fb0907e870803ecbdb12ca97)
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the following commit(s) to linux-yocto/6.12:
1/4 [
Author: Bin Lan
Email: bin.lan.cn@windriver.com
Subject: fs/yaffs2: fix build warnings in yaffs_vfs.c when running make allyesconfig
Date: Mon, 9 Jun 2025 14:51:47 +0800
When building linux yocto with allyesconfig, some build warnings are found:
fs/yaffs2/yaffs_vfs.c:1292:15: error: no previous prototype for
‘yaffs_get_inode’ [-Werror=missing-prototypes]
1292 | struct inode *yaffs_get_inode(struct super_block *sb, int mode,
int dev,
| ^~~~~~~~~~~~~~~
fs/yaffs2/yaffs_vfs.c: In function ‘yaffs_iterate’:
fs/yaffs2/yaffs_vfs.c:1841:13: error: unused variable ‘i_version’
[-Werror=unused-variable]
1841 | u64 i_version;
| ^~~~~~~~~
fs/yaffs2/yaffs_vfs.c: At top level:
fs/yaffs2/yaffs_vfs.c:2441:16: error: no previous prototype for
‘yaffs2_get_parent’ [-Werror=missing-prototypes]
2441 | struct dentry *yaffs2_get_parent(struct dentry *dentry)
| ^~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Inspect the code that the two functions yaffs_get_inode() and
yaffs2_get_parent() are only used in the current file, i_version is not
used in the function yaffs_iterate(). So add the static modifier to the
two functions and remove the variable i_version.
Signed-off-by: Bin Lan <bin.lan.cn@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
]
2/4 [
Author: Bin Lan
Email: bin.lan.cn@windriver.com
Subject: fs/yaffs2: fix a build warning in yaffs_tagsmarshall.c when running make allyesconfig
Date: Mon, 9 Jun 2025 14:51:48 +0800
When building linux yocto with allyesconfig, a build warning is found:
fs/yaffs2/yaffs_tagsmarshall.c:188:6: error: no previous prototype for
‘yaffs_tags_marshall_install’ [-Werror=missing-prototypes]
188 | void yaffs_tags_marshall_install(struct yaffs_dev *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Inspect the code that the function yaffs_tags_marshall_install() is
declared in this header file yaffs_tagsmarshall.h. So include the
header file in yaffs_tagsmarshall.c.
Signed-off-by: Bin Lan <bin.lan.cn@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
]
3/4 [
Author: Bin Lan
Email: bin.lan.cn@windriver.com
Subject: fs/yaffs2: fix a build warning in yaffs_yaffs2.c when running make allyesconfig
Date: Mon, 9 Jun 2025 14:51:49 +0800
When building linux yocto with allyesconfig, a build warning is
found:
fs/yaffs2/yaffs_yaffs2.c:557:21: error: no previous prototype for
‘yaffs2_do_endian_tnode_copy’ [-Werror=missing-prototypes]
557 | struct yaffs_tnode *yaffs2_do_endian_tnode_copy(struct yaffs_dev
*dev,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Inspect the code that the function yaffs2_do_endian_tnode_copy() is
only used in the current file. So add the static modifier to it.
Signed-off-by: Bin Lan <bin.lan.cn@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
]
4/4 [
Author: Bin Lan
Email: bin.lan.cn@windriver.com
Subject: fs/yaffs2: fix a build warning in yaffs_mtdif.c when running make allyesconfig
Date: Mon, 9 Jun 2025 14:51:50 +0800
When building linux yocto with allyesconfig, a build warning is
found:
fs/yaffs2/yaffs_mtdif.c:48:5: error: no previous prototype for
‘nandmtd_erase_block’ [-Werror=missing-prototypes]
48 | int nandmtd_erase_block(struct yaffs_dev *dev, int block_no)
| ^~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Inspect the code that the function nandmtd_erase_block() is
not used by yaffs2. So remove it.
Signed-off-by: Bin Lan <bin.lan.cn@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
]
(From OE-Core rev: 9b877748ef7a789fb75db525fec5568691745fef)
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit [0] has been merged upstream, but there hasn't been a release containing it
yet.
[0]: cd12d9dd2b
(From OE-Core rev: 133b793830b1a30a79465fe4511029010f9a2c68)
Signed-off-by: Moritz Haase <Moritz.Haase@bmw.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There have been a number of upstream releases that ship this patch already, but
given that the most recent ones are considered experimental, I opted to backport
instead.
(From OE-Core rev: 84c1e99b74322b2f0fd2ecf256586ea618153547)
Signed-off-by: Moritz Haase <Moritz.Haase@bmw.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There hasn't been a new upstream release yet that ships the required changes.
(From OE-Core rev: 79b17a3ef8756373c1500f20ab69b228b2bf0902)
Signed-off-by: Moritz Haase <Moritz.Haase@bmw.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changelog:
===========
- fontconfig: Improve the add_font_file implementation
- fontconfig: Combine font features and style variants
- fontconfig: Make sure font faces stay alive
- win32: Drop some caching
- win32: Make sure font faces stay alive
- win32: Modernize and simplify the code
- win32: Stop synthesizing fonts
- win32: Implement list models
- coretext: Support synthetic small caps
- layout: Avoid assertions in line breaking
- build: Require GLib 2.82
(From OE-Core rev: c2658fb4b877fe5144446f5498cd3115418dbf15)
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
0001-meson.build-correct-check-for-existence-of-two-prepr.patch
removed since it's included in 1.7.1
Changelog:
===============
* pam_access: do not resolve ttys or display variables as hostnames.
* pam_access: added "nodns" option to disallow resolving of tokens as hostnames
(CVE-2024-10963).
* pam_limits: added support for rttime (RLIMIT_RTTIME).
* pam_namespace: fixed potential privilege escalation (CVE-2025-6020).
* meson: added support of elogind as a logind provider.
* Multiple minor bug fixes, build fixes, portability fixes,
documentation improvements, and translation updates.
(From OE-Core rev: 5e77c48e074a20e58a233ab5ed6d8ef09bbd55c8)
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enhance security by limiting read access for /etc/sshd_config to user root as it
may reveal unsecure configurations.
Reading access is limited in the install append as the default value 0644 is
hardcoded in the openssh makefile and is not configurable. Therefore the
permissions are modified in the install append.
(From OE-Core rev: 99c09d29d56cb98f749c2283b5b800de9af98745)
Signed-off-by: Louis Rannou <louis.rannou@non.se.com>
Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Debug builds fail with a panic in build.rs when attempting
to create rpm-sequoia.pc in a non-existent target/debug directory:
process didn't exit successfully: `TOPDIR/tmp/work/core2-32-wrs-linux/rpm-sequoia/1.7.0/build/target/debug/build/rpm-sequoia-d2609670a855c0b5/build-script-build` (exit status: 101)
— stderr
thread 'main' panicked at build.rs:125:36:
Creating "TOPDIR/tmp/work/core2-32-wrs-linux/rpm-sequoia/1.7.0/sources-unpack/git/target/debug/rpm-sequoia.pc" (CARGO_TARGET_DIR: None): Os
{ code: 2, kind: NotFound, message: "No such file or directory" }
This was caused by the build and install logic assuming a fixed release directory
in rpm-sequoia recipe.
Update build and install steps to use the ${BUILD_DIR} variable,
which is set based on the value of DEBUG_BUILD from cargo.bbclass.
(rpm-sequoia inherits cargo)
This ensures paths used for rpm-sequoia.pc generation and installation
are valid in both debug and release configurations.
(From OE-Core rev: 2d21762d6f163c7fb8796d1035b0e25e21a3350b)
Signed-off-by: Yash Shinde <Yash.Shinde@windriver.com>
Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow the risc-v TUNE_FEATURES to select specific ISA (kconfig) selections
via config fragments.
This allows the following items to be selected dynamically:
CONFIG_RISCV_ISA_C
CONFIG_RISCV_ISA_F
CONFIG_RISCV_ISA_D
CONFIG_RISCV_ISA_ZBB
CONFIG_RISCV_ISA_A
CONFIG_RISCV_ISA_ZICBOM
(From OE-Core rev: de890297b392fcf7f5bd2d25d3c173373b93dd36)
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
externalsrc_configure_prefunc assumed that the .git directory is
${S}/.git. This isn't true for submodules at least.
srctree_hash_files already contained code to ask Git for the correct
path to the .git directory. Let's move that code to a new find_git_dir
function and call it from both places and make the behaviour consistent.
(From OE-Core rev: 47891e200e92ba34a6ff2df2fba1032738f52f98)
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changelog:
=============
- Fix a bug that local file package metadata was missing when reading the lockfile.
- Extract dependency-groups and extras markers from marker value when parsing pylock.toml.
(From OE-Core rev: 81bdaa7dca8715d94f230b3698f519743765210e)
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changelog:
============
- Fix codecs deprecation in Python 3.14.
- Fix issue with unclosed comment parsing in Python 3.14.
- Fix issue with unclosed declarations in Python 3.14.
- Fix issue with unclosed HTML tag < foo and Python 3.14.
- Ensure incomplete markup declaration in raw HTML doesn't crash parser (#1534).
- Fixed dropped content in md_in_html (#1526).
- Fixed HTML handling corner case that prevented some content from not being rendered
(From OE-Core rev: 665b9720b0f5630090f0345abf6b49a3eda77608)
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com>
Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If build target has set TEST_SUITES, then that should
be the default test modules to execute. Fixes testexport.bbclass
to run same tests as testimage.bbclass which already
uses TEST_SUITES.
(From OE-Core rev: c66b1dc0a2f973a84dc38b7cc27ae823e0f0a916)
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
use TOOLCHAIN_NATIVE variable for selecting native compiler
Default it to PREFERRED_TOOLCHAIN_NATIVE, a recipe which wants
to enforce a toolchain can do so with
for cross toolchains ( e.g. target, nativesdk )
TOOLCHAIN = "gcc"
For native
TOOLCHAIN_NATIVE = "gcc"
This helps build native recipe with clang as native compiler.
(From OE-Core rev: 546baa210acacff5dde6ce55e9842b90277bc9a8)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
compiler-rt configure calls for c++ compiler which can cause C++ runtime to
not be detected on some Yocto autobuilder workers running ubuntu 24.04
therefore let it use gcc for native version
Set TOOLCHAIN_NATIVE for using clang for libcxx
(From OE-Core rev: d54512c1c0a98516077b77d5414af47d8c2b8c39)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If recipe inherits bbclass kernelsrc to use kernel sources,
the recipe should explicitly set ${KERNEL_VERSION} to ${PKGV}
in task do_package, otherwise package version (${PV} is usually
default 1.0) is not consistent with kernel source.
For example, there are 5 recipes in meta-openembedded to inherit
kernelsrc, but 4 recipes explicitly set PKGV.
meta-openembedded$ grep -e "setVar(.*PKGV.*KERNEL_VERSION" -e kernelsrc -rn *
meta-oe/recipes-kernel/intel-speed-select/intel-speed-select.bb:9:inherit kernelsrc
meta-oe/recipes-kernel/bpftool/bpftool.bb:8:inherit bash-completion kernelsrc kernel-arch
meta-oe/recipes-kernel/bpftool/bpftool.bb:44: d.setVar('PKGV', d.getVar("KERNEL_VERSION").split("-")[0])
meta-oe/recipes-kernel/cpupower/cpupower.bb:8:inherit kernelsrc kernel-arch bash-completion
meta-oe/recipes-kernel/cpupower/cpupower.bb:32: d.setVar('PKGV', d.getVar("KERNEL_VERSION").split("-")[0])
meta-oe/recipes-kernel/turbostat/turbostat.bb:98: d.setVar('PKGV', d.getVar("KERNEL_VERSION").split("-")[0])
meta-oe/recipes-kernel/usbip-tools/usbip-tools.bb:25:inherit kernelsrc autotools-brokensep
meta-oe/recipes-kernel/usbip-tools/usbip-tools.bb:68: d.setVar('PKGV', d.getVar("KERNEL_VERSION").split("-")[0])
meta-oe/recipes-kernel/spidev-test/spidev-test.bb:7:inherit bash-completion kernelsrc kernel-arch
meta-oe/recipes-kernel/spidev-test/spidev-test.bb:26: d.setVar('PKGV', d.getVar("KERNEL_VERSION").split("-")[0])
This commit clean up the setting of PKGV, move it to kernelsrc.bbclass
for common use, the recipe (such as intel-speed-select) that inherited
kernelsrc will not be required to explicitly set ${PKGV} with
${KERNEL_VERSION}
(From OE-Core rev: 77a93e8cf1da4231341c56f64f9d4d474f9f2bb7)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The package version of kernel-devsrc is 1.0 which is not consistent
with kernel source
$ bitbake kernel-devsrc
$ ls tmp/work/qemux86_64-poky-linux/kernel-devsrc/1.0/deploy-rpms/qemux86_64/kernel-devsrc-*
tmp/work/qemux86_64-poky-linux/kernel-devsrc/1.0/deploy-rpms/qemux86_64/kernel-devsrc-1.0-r0.qemux86_64.rpm
tmp/work/qemux86_64-poky-linux/kernel-devsrc/1.0/deploy-rpms/qemux86_64/kernel-devsrc-dbg-1.0-r0.qemux86_64.rpm
tmp/work/qemux86_64-poky-linux/kernel-devsrc/1.0/deploy-rpms/qemux86_64/kernel-devsrc-dev-1.0-r0.qemux86_64.rpm
After commit [kernelsrc.bbclass/perf: make package version consistent
with kernel source] applied, it moved the setting of PKGV to
kernelsrc.bbclass for common use. And bbclass kernelsrc has already
inherited linux-kernel-base, this commit uses bbclass kernelsrc to
instead of linux-kernel-base, and remove duplicated settings.
After applying this commit:
$ ls tmp/work/qemux86_64-poky-linux/kernel-devsrc/1.0/deploy-rpms/qemux86_64/kernel-devsrc-*
tmp/work/qemux86_64-poky-linux/kernel-devsrc/1.0/deploy-rpms/qemux86_64/kernel-devsrc-6.12.31-r0.qemux86_64.rpm
tmp/work/qemux86_64-poky-linux/kernel-devsrc/1.0/deploy-rpms/qemux86_64/kernel-devsrc-dbg-6.12.31-r0.qemux86_64.rpm
tmp/work/qemux86_64-poky-linux/kernel-devsrc/1.0/deploy-rpms/qemux86_64/kernel-devsrc-dev-6.12.31-r0.qemux86_64.rpm
(From OE-Core rev: ceff363630ac0397c40be4a5ce54a6c20f901c40)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building for qemuarm-secureboot in meta-arn with musl and clang,
the following compile error is seen:
- | ../sources/libucontext-1.3.2/arch/arm/swapcontext.S:23:11: error: unknown token in expression
- | ldr r4, =#0x56465001
- | ^
This is happening because 1.3 added ifdefs for assembly code for both
hard and soft float, and bcause neither is being defined, it is taking
this path with the issue.
Since we can tell if soft or hard float is being used via the TARGET_FPU
variable, use that and set the relevant makefile flag.
(From OE-Core rev: 61c54f169db74b818f587b3147c9abb611f64e0d)
Signed-off-by: Jon Mason <jon.mason@arm.com>
Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This release has:
- New parameter in top-level Makefile for reproducible builds
- Added MIPS P8700 platform support
- Allow arbitrary path in LLVM parameter of top-level Makefile
- Improved SBI v3.0 extensions to match frozen specification
- Emulate AMO instructions when Zaamo is not available
- Stop the harts waiting for HSM start from supervisor software
- Improved generic platform overrides to use common fdt_driver helpers
- Improved SBI MPXY framework to use per-domain data
- Added support for control transfer records (CTR) ISA extension
- Use LR and SC when Zaamo ISA extension is not available
- Added PXA UART support
- Added support for double-trap ISA extensions
- Optimized hartid and scratch lookup
- Added unit tests for bitwise operations
- Added unit tests for SBI ecall functionality
- Constify various FDT driver definitions
- Added MPXY RPMI mailbox driver for System MSI service group
- Improved RPMI drivers to match frozen specifications
- Initialize miscellaneous early drivers in one pass
- Use fdt_driver helpers for irqchip driver framework
- Allow adding SSE events dynamically at boot-time
- Simple singly linked list implementation
Overall, this release adds more ISA extensions and does many device driver
improvements.
(From OE-Core rev: 4278b9dde47957393fee46dfcc6620c3838cc73d)
Signed-off-by: Thomas Perrot <thomas.perrot@bootlin.com>
Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of hard coding the VEX justifications for "Ignored" CVE status,
add a map that configures what justification should be used for each
status.
This allows other justifications to be easily added, and also ensures
that status fields added externally (by downstream) can set an
appropriate justification if necessary.
(From OE-Core rev: c0fa3d92cefa74fa57c6c48c94acc64aa454e781)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
