-march=armv5't'e means that CPU can execute thumb ISA, we do not need to
tie this to exclusively generating thumb ISA, this change means that
when we have thumb in tune features then it can use 't' in -march
options irrespective of ISA being thumb or arm.
This fixes derivative of armv5 tunes and paves way for gcc9 where e.g.
armv5e is dropped and minimum arch supported is armv5te
(From OE-Core rev: 49bc3eab2897307a92b538a045e3d4dce245b0e0)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 5s timeout for non-kvm is too short, especially when the load is high,
which leads to unexpected errors, so set timeout to 60s by default.
(From OE-Core rev: 8197d0f638a760fc03062c7a9009117d083d7ead)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the unique hash is being used to track task dependencies, the hash
validation function needs to know about it in order to properly validate
the hash.
[YOCTO #13030]
(Bitbake rev: 9a529bb2658a4046dafbf32e1eb503d84e64e947)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The unique hash is now passed to the task in the BB_UNIHASH variable
[YOCTO #13030]
(Bitbake rev: aab80b099f6f259e4b57cba2c26dd385d07c5947)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Requests the task unique hash from siggen and tracks it
[YOCTO #13030]
(Bitbake rev: 1ecc47f0831b35c8c92b37a81cef4e43ff9f67b2)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Abstracts the function to get the unique hash for a task. This hash is
used as in place of the taskhash for the purpose of determine how other
tasks depend on this one. Unless overridden, the taskhash is the same as
the unique hash, preserving the original behavior.
[YOCTO #13030]
(Bitbake rev: d0065b34cea81fcadff14b0383779e9559d94508)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This can save do_configure's time from 330s to 60s on my host.
(From OE-Core rev: c22b0bf66a28324da66caf0660f171cc279a1f2b)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Meson is growing in popularity, so add it to the SDK packagegroup.
(From OE-Core rev: e2f863e13d33b193b1b5b1ba08f574776a210ac1)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Meson uses pkg_resources, which is part of setuptools.
(From OE-Core rev: 30a9dbc8a13928541ce6ff270801b8fd1c8af37e)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To fix:
Error: Transaction check error:
file /usr/share/man/man3/crypt.3 conflicts between attempted installs
of libcrypt-doc-4.4.1-r0.core2_64 and man-pages-4.16-r0.core2_64
This issue came about after commit 59be9254df9f [libxcrypt: Upgrade to
4.4.1 release].
(From OE-Core rev: c4e0034cd1f020cfb074c7c80af281683752afeb)
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop patches now included in the update
refactoered pkgconfig.patch
(From OE-Core rev: cb38ff242cf3e1a9cda726703bd12778bde38f93)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bug fix only update.
Bug 1252891 - Implemented EKU handling for IPsec IKE.
Bug 1423043 - Enable half-closed states for TLS.
Bug 1493215 - Enabled the following ciphersuites by default:
TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
TLS_RSA_WITH_AES_256_GCM_SHA384
Bug 1412829, Reject empty supported_signature_algorithms in Certificate Request in TLS 1.2
Bug 1485864 - Cache side-channel variant of the Bleichenbacher attack (CVE-2018-12404)
Bug 1481271 - Resend the same ticket in ClientHello after HelloRetryRequest
Bug 1493769 - Set session_id for external resumption tokens
Bug 1507179 - Reject CCS after handshake is complete in TLS 1.3
(From OE-Core rev: e0e6b80d76efbe044ce9b8923897195b28c2680c)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
SRCREV upgraded to 223817ee3798 ("Add Wayland support")
Additional patches rebased to this version
(From OE-Core rev: 50691151e916b1cdb9291f0f0bd913f2f79acfcd)
Signed-off-by: Roman Stratiienko <roman.stratiienko@globallogic.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The sstate bbclass uses workdir as a hardcoded string in path
manipulations. This means that the sstate caching mechanism does
not work for the work-shared directory which the kernel uses to
share its build configuration and source files for out of tree
kernel modules.
This commit modifies the path manipulation mechanism to use the
work-shared directory if detected in the paths when handling the
sstate cache packages.
(From OE-Core rev: 27642449f95e38598f9c83948ce109c5891e5877)
Signed-off-by: Michael Ho <Michael.Ho@bmw.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When an indirect multiconfig dependency exists, such as:
A depends on B, B has a multiconfig dependency to C,and our build
target is A, the multiconfig dependency to C is not processed on
time, hence no providers are added for it, causing an exception in
the runqueue because the dependency does exist in it.
Call add_unresolved() for all available multiconfigs before processing
providers for multiconfig dependencies, detecting mcdepends on time so
providers for them can be added correctly.
(Bitbake rev: 8a6bc7584ad61b4de98af92a86066602006262f9)
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Follow dependent hash changes recursively also when specifying two
signature files explicitly. Previously this was only done when using the
--task option.
(Bitbake rev: 353f0f3c77c3cdd75c1be2a565234a5e53dba3ef)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The functionalities of bitbake-diffsigs and bitbake-dumpsig are so
similar that they can be merged into one. Add an option --dump to make
bitbake-diffsigs dump the last signature data instead of comparing it.
Keep bitbake-dumpsig as a symbolic link to bitbake-diffsigs. When it is
called as bitbake-dumpsig, it behaves as if --dump was specified.
Also make -D the short option for --debug again (the way it used to be,
and still was for bitbake-dumpsig), so that -d can be used as the short
option for --dump.
(Bitbake rev: 3635b829e4eb940ada2b52bfb5b5e5be93a3b0aa)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
opkg needs the replaces/conflicts/provides in order for this package
to function as intended. When enabled, this code caused failures for
core-image-sato -c populate_sdk.
The reason is that nativesdk-autoconf has several perl dependencies. We
need to list more of the things which this package provides/conflicts
with in order for it to function correctly. Therefore add the missing
entries.
(From OE-Core rev: 27412b377dda47daa87bfcb3a41babe53ff8b0a3)
(From OE-Core rev: e0db1beb6db624b3b743e780c298c63a1e177cfb)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When use simpleremote target the flash/boot process is executed
manually, the IMAGE_FSTYPES validation is only needed when execute
testimage against qemu.
The supported_fstypes comes from oeqa.core.target.qemu module.
(From OE-Core rev: e7dc5963adbacc091fe8943119262166977623ad)
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes:
curl: add %{stderr} and %{stdout} for --write-out
curl: add undocumented option --dump-module-paths for win32
setopt: add CURLOPT_CURLU
For full list of changes see:
https://curl.haxx.se/changes.html
(From OE-Core rev: 2837266edbe097dcd9ff5fcdf29bb56f38bf564d)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2018i:
Briefly:
São Tomé and Príncipe switches from +01 to +00 on 2019-01-01.
Changes to future timestamps
Due to a change in government, São Tomé and Príncipe switches back
from +01 to +00 on 2019-01-01 at 02:00. (Thanks to Vadim
Nasardinov and Michael Deckers.)
2018h:
Briefly:
Qyzylorda, Kazakhstan moved from +06 to +05 on 2018-12-21.
New zone Asia/Qostanay because Qostanay, Kazakhstan didn't move.
Metlakatla, Alaska observes PST this winter only.
Guess Morocco will continue to adjust clocks around Ramadan.
Add predictions for Iran from 2038 through 2090.
Changes to future timestamps
Guess that Morocco will continue to fall back just before and
spring forward just after Ramadan, the practice since 2012.
(Thanks to Maamar Abdelkader.) This means Morocco will observe
negative DST during Ramadan in main and vanguard formats, and in
rearguard format it stays in the +00 timezone and observes
ordinary DST in all months other than Ramadan. As before, extend
this guesswork to the year 2037. As a consequence, Morocco is
scheduled to observe three DST transitions in some Gregorian years
(e.g., 2033) due to the mismatch between the Gregorian and Islamic
calendars.
The table of exact transitions for Iranian DST has been extended.
It formerly cut off before the year 2038 in a nod to 32-bit time_t.
It now cuts off before 2091 as there is doubt about how the Persian
calendar will treat 2091. This change predicts DST transitions in
2038-9, 2042-3, and 2046-7 to occur one day later than previously
predicted. As before, post-cutoff transitions are approximated.
Changes to past and future timestamps
Qyzylorda (aka Kyzylorda) oblast in Kazakhstan moved from +06 to
+05 on 2018-12-21. This is a zone split as Qostanay (aka
Kostanay) did not switch, so create a zone Asia/Qostanay.
Metlakatla moved from Alaska to Pacific standard time on 2018-11-04.
It did not change clocks that day and remains on -08 this winter.
(Thanks to Ryan Stanley.) It will revert to the usual Alaska
rules next spring, so this change affects only timestamps
from 2018-11-04 through 2019-03-10.
Change to past timestamps
Kwajalein's 1993-08-20 transition from -12 to +12 was at 24:00,
not 00:00. I transcribed the time incorrectly from Shanks.
(Thanks to Phake Nick.)
Nauru's 1979 transition was on 02-10 at 02:00, not 05-01 at 00:00.
(Thanks to Phake Nick.)
Guam observed DST irregularly from 1959 through 1977.
(Thanks to Phake Nick.)
Hong Kong observed DST in 1941 starting 06-15 (not 04-01), then on
10-01 changed standard time to +08:30 (not +08). Its transition
back to +08 after WWII was on 1945-09-15, not the previous day.
Its 1904-10-30 change took effect at 01:00 +08 (not 00:00 LMT).
(Thanks to Phake Nick, Steve Allen, and Joseph Myers.) Also,
its 1952 fallback was on 11-02 (not 10-25).
This release contains many changes to timestamps before 1946 due
to Japanese possession or occupation of Pacific/Chuuk,
Pacific/Guam, Pacific/Kosrae, Pacific/Kwajalein, Pacific/Majuro,
Pacific/Nauru, Pacific/Palau, and Pacific/Pohnpei.
(Thanks to Phake Nick.)
Assume that the Spanish East Indies was like the Philippines and
observed American time until the end of 1844. This affects
Pacific/Chuuk, Pacific/Kosrae, Pacific/Palau, and Pacific/Pohnpei.
Changes to past tm_isdst flags
For the recent Morocco change, the tm_isdst flag should be 1 from
2018-10-27 00:00 to 2018-10-28 03:00. (Thanks to Michael Deckers.)
Give a URL to the official decree. (Thanks to Matt Johnson.)
(From OE-Core rev: 100d0d0f24cabedd1a89b69ac8ffb05d85663761)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop 0001-Correctly-install-the-shared-library.patch as upstream fixed the issue.
(From OE-Core rev: c9447be6efc89b2d6259bcd4237af482d47b389f)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop upstreamed gi-flags.patch and gtkdoc-flags.patch, rebase the rest.
(From OE-Core rev: 6cc5c57c38d2da37b4f15dea6e1fb97e3a0bae73)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Then we can get user's UID and GID rather than hardcode to 1000, e.g.:
- Without sudo
$ runqemu-gen-tapdevs --help
[snip]
$ sudo ../poky/scripts/runqemu-gen-tapdevs 15220 100 4 tmp/sysroots-components/x86_64/qemu-helper-native/usr/bin
[snip]
- With sudo
$ sudo ../poky/scripts/runqemu-gen-tapdevs --help
[snip]
$ sudo ../poky/scripts/runqemu-gen-tapdevs 15220 100 4 tmp/sysroots-components/x86_64/qemu-helper-native/usr/bin
[snip]
(From OE-Core rev: 446e7da7e56f9de3602498b5ef40e9e0f8f71837)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The libnolto_coregrind_a_OBJECTS is in libcoregrind_a_LIBADD, so the objects
should be ready before generate libcoregrind.a, otherwise there would be
failures:
i586-poky-linux-ar: libnolto_coregrind_x86_linux_a-m_libcsetjmp.o: No such file or directory
make[3]: *** [libcoregrind-x86-linux.a] Error 1
Add libnolto_coregrind_a_OBJECTS to EXTRA_libcoregrind_DEPENDENCIES to fix the
problem.
This is a race issue during parallel build.
(From OE-Core rev: 713d6978894269e5b463c3731c03da7e83956743)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The line was added in
os-release: add the public package-signing key
f7359ad6bec82d4aa761287a6c6d53cbc25adab3
but the actual usage was removed in
signing-keys: Make signing keys the only publisher of keys
1e38068ac38dfd067655dfd41464e28439179306
(From OE-Core rev: 05aeb9de239beff4bfdb3cd7dc39d484ecb69190)
Signed-off-by: Jacob Kroon <jacob.kroon@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* in some rare cases the file format might be broken, e.g. when you run
out of disk space while writing to it (hint: make sure to use
BB_DISKMON_DIRS on _all_ the builds, to make sure that they can stop
gracefully before this happens).
* will show error like this:
ERROR: Invalid line '/OE/build/luneos-thud/webos-ports' in sstate manifest '/OE/build/luneos-thud/webos-ports/tmp-glibc/sstate-control/index-allarch'
when the file isn't complete, like in my case:
$ tail -n 2 /OE/build/luneos-thud/webos-ports/tmp-glibc/sstate-control/index-allarch
/OE/build/luneos-thud/webos-ports/tmp-glibc/stamps/all-webos-linux/org.webosports.app.calculator/0.1.1+gitrAUTOINC+9e9eb67c28-r0 /OE/build/luneos-thud/webos-ports/tmp-glibc/sstate-control/manifest-allarch-org.webosports.app.calculator /OE/build/luneos-thud/webos-ports/tmp-glibc/work/all-webos-linux/org.webosports.app.calculator/0.1.1+gitrAUTOINC+9e9eb67c28-r0
/OE/build/luneos-thud/webos-ports
* instead of much longer exception which doesn't really show what's
wrong to selectively fix that (other than removing while TMPDIR):
ERROR: Command execution failed: Traceback (most recent call last):
File "/OE/build/luneos-thud/webos-ports/bitbake/lib/bb/command.py", line 113, in runAsyncCommand
self.cooker.updateCache()
File "/OE/build/luneos-thud/webos-ports/bitbake/lib/bb/cooker.py", line 1562, in updateCache
bb.event.fire(event, self.databuilder.mcdata[mc])
File "/OE/build/luneos-thud/webos-ports/bitbake/lib/bb/event.py", line 225, in fire
fire_class_handlers(event, d)
File "/OE/build/luneos-thud/webos-ports/bitbake/lib/bb/event.py", line 134, in fire_class_handlers
execute_handler(name, handler, event, d)
File "/OE/build/luneos-thud/webos-ports/bitbake/lib/bb/event.py", line 106, in execute_handler
ret = handler(event)
File "/OE/build/luneos-thud/webos-ports/openembedded-core/meta/classes/sstate.bbclass", line 1083, in sstate_eventhandler2
(stamp, manifest, workdir) = l.split()
ValueError: not enough values to unpack (expected 3, got 1)
(From OE-Core rev: 870ba5d80e76e0f989971532fc2adc0ebe811ab6)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Before linux commit d36b691077dc59c74efec0d54ed21b86f7a2a21a, some
strings contained invalid utf-8 character which made
split_kernel_module_packages unhappy when parsing ums-isd200.ko:
Exception: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xf6 in position 21: invalid start byte
(From OE-Core rev: 503b977acf6984120818cbc5cfd35ff2cffb39cd)
Signed-off-by: Pau Espin Pedrol <pespin@sysmocom.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
