mklibs-native: update SRC_URI

The upstream oe-core recipe fixed similar fetcher issues by switching
to a specific debian snapshot version. However, the debian snapshot
doesn't provide mklibs 0.1.38 so fetch from yoctoproject.org mirror
instead.

(From OE-Core rev: bad46f25ec5d0069d7274e22662b71ba9a9753c4)

Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

.templateconf

@@ -0,0 +1,2 @@
+# Template settings
+TEMPLATECONF=${TEMPLATECONF:-meta-yocto/conf}

README.hardware

@@ -46,9 +46,8 @@ Hardware Reference Boards
 
 The following boards are supported by the meta-yocto-bsp layer:
 
-  * Texas Instruments Beagleboard (beagleboard)
+  * Texas Instruments Beaglebone (beaglebone)
   * Freescale MPC8315E-RDB (mpc8315e-rdb)
-  * Ubiquiti Networks RouterStation Pro (routerstationpro)
 
 For more information see the board's section below. The appropriate MACHINE
 variable value corresponding to the board is given in brackets.
@@ -60,6 +59,7 @@ Consumer Devices
 The following consumer devices are supported by the meta-yocto-bsp layer:
 
   * Intel x86 based PCs and devices (genericx86)
+  * Ubiquiti Networks EdgeRouter Lite (edgerouter)
 
 For more information see the device's section below. The appropriate MACHINE
 variable value corresponding to the device is given in brackets.
@@ -180,30 +180,28 @@ USB Device:
   http://git.kernel.org/?p=boot/syslinux/syslinux.git;a=blob_plain;f=doc/usbkey.txt;hb=HEAD
 
 
-Texas Instruments Beagleboard (beagleboard)
-===========================================
+Texas Instruments Beaglebone (beaglebone)
+=========================================
 
-The Beagleboard is an ARM Cortex-A8 development board with USB, DVI-D, S-Video,
-2D/3D accelerated graphics, audio, serial, JTAG, and SD/MMC. The xM adds a
-faster CPU, more RAM, an ethernet port, more USB ports, microSD, and removes
-the NAND flash. The beagleboard MACHINE is tested on the following platforms:
+The Beaglebone is an ARM Cortex-A8 development board with USB, Ethernet, 2D/3D
+accelerated graphics, audio, serial, JTAG, and SD/MMC. The Black adds a faster
+CPU, more RAM, eMMC flash and a micro HDMI port. The beaglebone MACHINE is
+tested on the following platforms:
 
-  o Beagleboard C4
-  o Beagleboard xM rev A & B
+  o Beaglebone Black A6
+  o Beaglebone A6 (the original "White" model)
 
-The Beagleboard C4 has NAND, while the xM does not. For the sake of simplicity,
-these instructions assume you have erased the NAND on the C4 so its boot
-behavior matches that of the xM. To do this, issue the following commands from
-the u-boot prompt (note that the unlock may be unecessary depending on the
-version of u-boot installed on your board and only one of the erase commands
-will succeed):
+The Beaglebone Black has eMMC, while the White does not. Pressing the USER/BOOT
+button when powering on will temporarily change the boot order. But for the sake
+of simplicity, these instructions assume you have erased the eMMC on the Black,
+so its boot behavior matches that of the White and boots off of SD card. To do
+this, issue the following commands from the u-boot prompt:
 
-    # nand unlock
-    # nand erase
-    # nand erase.chip
+    # mmc dev 1
+    # mmc erase 0 512
 
 To further tailor these instructions for your board, please refer to the
-documentation at http://www.beagleboard.org.
+documentation at http://www.beagleboard.org/bone and http://www.beagleboard.org/black
 
 From a Linux system with access to the image files perform the following steps
 as root, replacing mmcblk0* with the SD card device on your machine (such as sdc
@@ -211,11 +209,11 @@ if used via a usb card reader):
 
   1. Partition and format an SD card:
      # fdisk -lu /dev/mmcblk0
-     
+
      Disk /dev/mmcblk0: 3951 MB, 3951034368 bytes
      255 heads, 63 sectors/track, 480 cylinders, total 7716864 sectors
      Units = sectors of 1 * 512 = 512 bytes
-     
+
              Device Boot      Start         End      Blocks  Id System
      /dev/mmcblk0p1   *          63      144584       72261   c Win95 FAT32 (LBA)
      /dev/mmcblk0p2          144585      465884      160650  83 Linux
@@ -223,51 +221,40 @@ if used via a usb card reader):
      # mkfs.vfat -F 16 -n "boot" /dev/mmcblk0p1
      # mke2fs -j -L "root" /dev/mmcblk0p2
 
-  The following assumes the SD card partition 1 and 2 are mounted at
+  The following assumes the SD card partitions 1 and 2 are mounted at
   /media/boot and /media/root respectively. Removing the card and reinserting
   it will do just that on most modern Linux desktop environments.
-  
+
   The files referenced below are made available after the build in
   build/tmp/deploy/images.
 
   2. Install the boot loaders
-     # cp MLO-beagleboard /media/boot/MLO
-     # cp u-boot-beagleboard.bin /media/boot/u-boot.bin
+     # cp MLO-beaglebone /media/boot/MLO
+     # cp u-boot-beaglebone.img /media/boot/u-boot.img
 
   3. Install the root filesystem
-     # tar x -C /media/root -f core-image-$IMAGE_TYPE-beagleboard.tar.bz2
-     # tar x -C /media/root -f modules-$KERNEL_VERSION-beagleboard.tgz
+     # tar x -C /media/root -f core-image-$IMAGE_TYPE-beaglebone.tar.bz2
 
-  4. Install the kernel uImage
-     # cp uImage-beagleboard.bin /media/boot/uImage
+  4. If using core-image-base or core-image-sato images, the SD card is ready
+     and rootfs already contains the kernel, modules and device tree (DTB)
+     files necessary to be booted with U-boot's default configuration, so
+     skip directly to step 8.
+     For core-image-minimal, proceed through next steps.
 
-  5. Prepare a u-boot script to simplify the boot process
-     The Beagleboard can be made to boot at this point from the u-boot command
-     shell. To automate this process, generate a user.scr script as follows.
+  5. If using core-image-minimal rootfs, install the modules
+     # tar x -C /media/root -f modules-beaglebone.tgz
 
-     Install uboot-mkimage (from uboot-mkimage on Ubuntu or uboot-tools on Fedora).
+  6. If using core-image-minimal rootfs, install the kernel uImage into /boot
+     directory of rootfs
+     # cp uImage-beaglebone.bin /media/root/boot/uImage
 
-     Prepare a script config:
+  7. If using core-image-minimal rootfs, also install device tree (DTB) files
+     into /boot directory of rootfs
+     # cp uImage-am335x-bone.dtb /media/root/boot/am335x-bone.dtb
+     # cp uImage-am335x-boneblack.dtb /media/root/boot/am335x-boneblack.dtb
 
-     # (cat << EOF
-     setenv bootcmd 'mmc init; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000'
-     setenv bootargs 'console=tty0 console=ttyO2,115200n8 root=/dev/mmcblk0p2 rootwait rootfstype=ext3 ro'
-     boot
-     EOF
-     ) > serial-boot.cmd
-     # mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "Core Minimal" -d ./serial-boot.cmd ./boot.scr
-     # cp boot.scr /media/boot
-
-   6. Unmount the SD partitions, insert the SD card into the Beagleboard, and
-      boot the Beagleboard
-
-Note: As of the 2.6.37 linux-yocto kernel recipe, the Beagleboard uses the
-      OMAP_SERIAL device (ttyO2). If you are using an older kernel, such as the
-      2.6.34 linux-yocto-stable, be sure to replace ttyO2 with ttyS2 above. You
-      should also override the machine SERIAL_CONSOLE in your local.conf in
-      order to setup the getty on the serial line:
-
-      SERIAL_CONSOLE_beagleboard = "115200 ttyS2"
+  8. Unmount the SD partitions, insert the SD card into the Beaglebone, and
+     boot the Beaglebone
 
 
 Freescale MPC8315E-RDB (mpc8315e-rdb)
@@ -331,164 +318,159 @@ Load the kernel and dtb (device tree blob), and boot the system as follows:
  => bootm 1000000 - 2000000
 
 
-Ubiquiti Networks RouterStation Pro (routerstationpro)
-======================================================
+Ubiquiti Networks EdgeRouter Lite (edgerouter)
+==============================================
 
-The RouterStation Pro is an Atheros AR7161 MIPS-based board. Geared towards
-networking applications, it has all of the usual features as well as three
-type IIIA mini-PCI slots and an on-board 3-port 10/100/1000 Ethernet switch,
-in addition to the 10/100/1000 Ethernet WAN port which supports
-Power-over-Ethernet.
+The EdgeRouter Lite is part of the EdgeMax series. It is a MIPS64 router
+(based on the Cavium Octeon processor) with 512MB of RAM, which uses an
+internal USB pendrive for storage.
 
 Setup instructions
 ------------------
 
 You will need the following:
-* A serial cable - female to female (or female to male + gender changer)
-  NOTE: cable must be straight through, *not* a null modem cable.
-* USB flash drive or hard disk that is able to be powered from the
-  board's USB port.
-* tftp server installed on your workstation
-
-NOTE: in the following instructions it is assumed that /dev/sdb corresponds
-to the USB disk when it is plugged into your workstation. If this is not the
-case in your setup then please be careful to substitute the correct device
-name in all commands where appropriate.
+* NFS root setup on your workstation
+* TFTP server installed on your workstation
+* RJ45 -> serial ("rollover") cable connected from your PC to the CONSOLE
+  port on the board
+* Ethernet connected to the first ethernet port on the board
 
 --- Preparation ---
 
-1) Build an image (e.g. core-image-minimal) using "routerstationpro" as the
-MACHINE
+Build an image (e.g. core-image-minimal) using "edgerouter" as the MACHINE.
+In the following instruction it is based on core-image-minimal. Another target
+may be similiar with it.
 
-2) Partition the USB drive so that primary partition 1 is type Linux (83).
-Minimum size depends on your root image size - core-image-minimal probably
-only needs 8-16MB, other images will need more.
+--- Booting from NFS root ---
 
-  # fdisk /dev/sdb
-  Command (m for help): p
+Load the kernel, and boot the system as follows:
 
-  Disk /dev/sdb: 4011 MB, 4011491328 bytes
-  124 heads, 62 sectors/track, 1019 cylinders, total 7834944 sectors
-  Units = sectors of 1 * 512 = 512 bytes
-  Sector size (logical/physical): 512 bytes / 512 bytes
-  I/O size (minimum/optimal): 512 bytes / 512 bytes
-  Disk identifier: 0x0009e87d
+ 1. Get the kernel (vmlinux) file from the tmp/deploy/images/edgerouter
+    directory, and make them available on your TFTP server.
 
-     Device Boot      Start         End      Blocks   Id  System
-  /dev/sdb1              62     1952751      976345   83  Linux
+ 2. Connect the board's first serial port to your workstation and then start up
+    your favourite serial terminal so that you will be able to interact with
+    the serial console. If you don't have a favourite, picocom is suggested:
 
-3) Format partition 1 on the USB as ext3
+  $ picocom /dev/ttyS0 -b 115200
 
-  # mke2fs -j /dev/sdb1
+ 3. Power up or reset the board and press a key on the terminal when prompted
+    to get to the U-Boot command line
 
-4) Mount partition 1 and then extract the contents of
-tmp/deploy/images/core-image-XXXX.tar.bz2 into it (preserving permissions).
+ 4. Set up the environment in U-Boot:
 
-  # mount /dev/sdb1 /media/sdb1
-  # cd /media/sdb1
-  # tar -xvjpf tmp/deploy/images/core-image-XXXX.tar.bz2
+ => setenv ipaddr <board ip>
+ => setenv serverip <tftp server ip>
 
-5) Unmount the USB drive and then plug it into the board's USB port
+ 5. Download the kernel and boot:
 
-6) Connect the board's serial port to your workstation and then start up
-your favourite serial terminal so that you will be able to interact with
-the serial console. If you don't have a favourite, picocom is suggested:
+ => tftp tftp $loadaddr vmlinux
+ => bootoctlinux $loadaddr coremask=0x3 root=/dev/nfs rw nfsroot=<nfsroot ip>:<rootfs path> ip=<board ip>:<server ip>:<gateway ip>:<netmask>:edgerouter:eth0:off mtdparts=phys_mapped_flash:512k(boot0),512k(boot1),64k@3072k(eeprom)
 
-  $ picocom /dev/ttyUSB0 -b 115200
+--- Booting from USB root ---
 
-7) Connect the network into eth0 (the one that is NOT the 3 port switch). If
-you are using power-over-ethernet then the board will power up at this point.
+To boot from the USB disk, you either need to remove it from the edgerouter
+box and populate it from another computer, or use a previously booted NFS
+image and populate from the edgerouter itself.
 
-8) Start up the board, watch the serial console. Hit Ctrl+C to abort the
-autostart if the board is configured that way (it is by default). The
-bootloader's fconfig command can be used to disable autostart and configure
-the IP settings if you need to change them (default IP is 192.168.1.20).
+Type 1: Mounted USB disk
+------------------------
 
-9) Make the kernel (tmp/deploy/images/vmlinux-routerstationpro.bin) available
-on the tftp server.
+To boot from the USB disk there are two available partitions on the factory
+USB storage. The rest of this guide assumes that these partitions are left
+intact. If you change the partition scheme, you must update your boot method
+appropriately.
 
-10) If you are going to write the kernel to flash (optional - see "Booting a
-kernel directly" below for the alternative), remove the current kernel and
-rootfs flash partitions. You can list the partitions using the following
-bootloader command:
+The standard partitions are:
 
-  RedBoot> fis list
+  - 1: vfat partition containing factory kernels
+  - 2: ext3 partition for the root filesystem.
 
-You can delete the existing kernel and rootfs with these commands:
+You can place the kernel on either partition 1, or partition 2, but the roofs
+must go on partition 2 (due to its size).
 
-  RedBoot> fis delete kernel
-  RedBoot> fis delete rootfs
+Note: If you place the kernel on the ext3 partition, you must re-create the
+      ext3 filesystem, since the factory u-boot can only handle 128 byte inodes and
+      cannot read the partition otherwise.
 
---- Booting a kernel directly ---
+Steps:
 
-1) Load the kernel using the following bootloader command:
+ 1. Remove the USB disk from the edgerouter and insert it into a computer
+    that has access to your build artifacts.
 
-  RedBoot> load -m tftp -h <ip of tftp server> vmlinux-routerstationpro.bin
+ 2. Copy the kernel image to the USB storage (assuming discovered as 'sdb' on
+    the development machine):
 
-You should see a message on it being successfully loaded.
+    2a) if booting from vfat
+ 
+        # mount /dev/sdb1 /mnt
+        # cp tmp/deploy/images/edgerouter/vmlinux /mnt
+        # umount /mnt
 
-2) Execute the kernel:
+    2b) if booting from ext3
 
-  RedBoot> exec -c "console=ttyS0,115200 root=/dev/sda1 rw rootdelay=2 board=UBNT-RSPRO"
+        # mkfs.ext3 -I 128 /dev/sdb2
+        # mount /dev/sdb2 /mnt
+        # mkdir /mnt/boot
+        # cp tmp/deploy/images/edgerouter/vmlinux /mnt/boot
+        # umount /mnt
 
-Note that specifying the command line with -c is important as linux-yocto does
-not provide a default command line.
+ 3. Extract the rootfs to the USB storage ext3 partition
 
---- Writing a kernel to flash ---
+        # mount /dev/sdb2 /mnt
+        # tar -xvjpf core-image-minimal-XXX.tar.bz2 -C /mnt
+        # umount /mnt
 
-1) Go to your tftp server and gzip the kernel you want in flash. It should
-halve the size.
+ 4. Reboot the board and press a key on the terminal when prompted to get to the U-Boot
+    command line:
 
-2) Load the kernel using the following bootloader command:
+ 5. Load the kernel and boot:
 
-  RedBoot> load -r -b 0x80600000 -m tftp -h <ip of tftp server> vmlinux-routerstationpro.bin.gz
+    5a) vfat boot
 
-This should output something similar to the following:
+         => fatload usb 0:1 $loadaddr vmlinux
 
-  Raw file loaded 0x80600000-0x8087c537, assumed entry at 0x80600000
+    5b) ext3 boot
 
-Calculate the length by subtracting the first number from the second number
-and then rounding the result up to the nearest 0x1000.
+         => ext2load usb 0:2 $loadaddr boot/vmlinux
+ 
+    => bootoctlinux $loadaddr coremask=0x3 root=/dev/sda2 rw rootwait mtdparts=phys_mapped_flash:512k(boot0),512k(boot1),64k@3072k(eeprom)
+ 
 
-3) Using the length calculated above, create a flash partition for the kernel:
+Type 2: NFS
+-----------
 
-  RedBoot> fis create -b 0x80600000 -l 0x240000 kernel
+Note: If you place the kernel on the ext3 partition, you must re-create the
+      ext3 filesystem, since the factory u-boot can only handle 128 byte inodes and
+      cannot read the partition otherwise.
 
-(change 0x240000 to your rounded length -- change "kernel" to whatever
-you want to name your kernel)
+      These boot instructions assume that you have recreated the ext3 filesystem with
+      128 byte inodes, you have an updated uboot or you are running and image capable
+      of making the filesystem on the board itself.
 
---- Booting a kernel from flash ---
 
-To boot the flashed kernel perform the following steps.
+ 1. Boot from NFS root
 
-1) At the bootloader prompt, load the kernel:
+ 2. Mount the USB disk partition 2 and then extract the contents of
+    tmp/deploy/core-image-XXXX.tar.bz2 into it.
 
-  RedBoot> fis load -d -e kernel
+    Before starting, copy core-image-minimal-xxx.tar.bz2 and vmlinux into
+    rootfs path on your workstation.
 
-(Change the name "kernel" above if you chose something different earlier)
+    and then,
+  
+      # mount /dev/sda2 /media/sda2
+      # tar -xvjpf core-image-minimal-XXX.tar.bz2 -C /media/sda2
+      # cp vmlinux /media/sda2/boot/vmlinux
+      # umount /media/sda2
+      # reboot
 
-(-e means 'elf', -d 'decompress')
+ 3. Reboot the board and press a key on the terminal when prompted to get to the U-Boot
+    command line:
 
-2) Execute the kernel using the exec command as above.
+    # reboot
 
---- Automating the boot process ---
-
-After writing the kernel to flash and testing the load and exec commands
-manually, you can automate the boot process with a boot script.
-
-1) RedBoot> fconfig
-   (Answer the questions not specified here as they pertain to your environment)
-2) Run script at boot: true
-  Boot script: 
-  .. fis load -d -e kernel
-  .. exec
-  Enter script, terminate with empty line
-  >> fis load -d -e kernel
-  >> exec -c "console=ttyS0,115200 root=/dev/sda1 rw rootdelay=2 board=UBNT-RSPRO"
-  >> 
-3) Answer the remaining questions and write the changes to flash:
-  Update RedBoot non-volatile configuration - continue (y/n)? y
-  ... Erase from 0xbfff0000-0xc0000000: .
-  ... Program from 0x87ff0000-0x88000000 at 0xbfff0000: .
-4) Power cycle the board.
+ 4. Load the kernel and boot:
 
+      => ext2load usb 0:2 $loadaddr boot/vmlinux
+      => bootoctlinux $loadaddr coremask=0x3 root=/dev/sda2 rw rootwait mtdparts=phys_mapped_flash:512k(boot0),512k(boot1),64k@3072k(eeprom)

bitbake/bin/bitbake

@@ -41,7 +41,7 @@ from bb import ui
 from bb import server
 from bb import cookerdata
 
-__version__ = "1.21.1"
+__version__ = "1.22.0"
 logger = logging.getLogger("BitBake")
 
 # Python multiprocessing requires /dev/shm
@@ -139,8 +139,8 @@ class BitBakeConfigParameters(cookerdata.ConfigParameters):
         parser.add_option("-n", "--dry-run", help = "Don't execute, just go through the motions.",
                    action = "store_true", dest = "dry_run", default = False)
 
-        parser.add_option("-S", "--dump-signatures", help = "Don't execute, just dump out the signature construction information.",
-                   action = "store_true", dest = "dump_signatures", default = False)
+        parser.add_option("-S", "--dump-signatures", help = "Dump out the signature construction information, with no task execution. Parameters are passed to the signature handling code, use 'none' if no specific handler is required.",
+                   action = "append", dest = "dump_signatures", default = [])
 
         parser.add_option("-p", "--parse-only", help = "Quit after parsing the BB recipes.",
                    action = "store_true", dest = "parse_only", default = False)
@@ -203,7 +203,7 @@ class BitBakeConfigParameters(cookerdata.ConfigParameters):
         return options, targets[1:]
 
 
-def start_server(servermodule, configParams, configuration):
+def start_server(servermodule, configParams, configuration, features):
     server = servermodule.BitBakeServer()
     if configParams.bind:
         (host, port) = configParams.bind.split(':')
@@ -216,13 +216,13 @@ def start_server(servermodule, configParams, configuration):
     try:
         configuration.setServerRegIdleCallback(server.getServerIdleCB())
 
-        cooker = bb.cooker.BBCooker(configuration)
+        cooker = bb.cooker.BBCooker(configuration, features)
 
         server.addcooker(cooker)
         server.saveConnectionDetails()
     except Exception as e:
         exc_info = sys.exc_info()
-        while True:
+        while hasattr(server, "event_queue"):
             try:
                 import queue
             except ImportError:
@@ -259,7 +259,7 @@ def main():
         servermodule = getattr(module, server_type)
     except AttributeError:
         sys.exit("FATAL: Invalid server type '%s' specified.\n"
-                 "Valid interfaces: xmlrpc, process [default]." % servertype)
+                 "Valid interfaces: xmlrpc, process [default]." % server_type)
 
     if configParams.server_only:
         if configParams.servertype != "xmlrpc":
@@ -296,9 +296,14 @@ def main():
     # Clear away any spurious environment variables while we stoke up the cooker
     cleanedvars = bb.utils.clean_environment()
 
+    featureset = []
+    if not configParams.server_only:
+        # Collect the feature set for the UI
+        featureset = getattr(ui_module, "featureSet", [])
+
     if not configParams.remote_server:
         # we start a server with a given configuration
-        server = start_server(servermodule, configParams, configuration)
+        server = start_server(servermodule, configParams, configuration, featureset)
         bb.event.ui_queue = []
     else:
         # we start a stub server that is actually a XMLRPClient that connects to a real server
@@ -307,9 +312,6 @@ def main():
         server.saveConnectionConfigParams(configParams)
 
     if not configParams.server_only:
-        # Collect the feature set for the UI
-        featureset = getattr(ui_module, "featureSet", [])
-
         if configParams.status_only:
             try:
                 server_connection = server.establishConnection(featureset)
@@ -326,7 +328,7 @@ def main():
             if configParams.kill_server:
                 bb.fatal("Server already killed")
             configParams.bind = configParams.remote_server
-            start_server(servermodule, configParams, configuration)
+            start_server(servermodule, configParams, configuration, featureset)
             bb.event.ui_queue = []
             server_connection = server.establishConnection(featureset)
 

bitbake/bin/bitbake-diffsigs

@@ -118,5 +118,5 @@ else:
             logger.error('Invalid signature data - ensure you are specifying sigdata/siginfo files')
             sys.exit(1)
 
-    if output:
-        print '\n'.join(output)
+        if output:
+            print '\n'.join(output)

bitbake/bin/bitbake-selftest

@@ -25,13 +25,24 @@ try:
 except RuntimeError as exc:
     sys.exit(str(exc))
 
-tests = ["bb.tests.codeparser", 
-         "bb.tests.cow",
-         "bb.tests.data",
-         "bb.tests.fetch",
-         "bb.tests.utils"]
+def usage():
+    print('usage: %s [testname1 [testname2]...]' % os.path.basename(sys.argv[0]))
+
+if len(sys.argv) > 1:
+    if '--help' in sys.argv[1:]:
+        usage()
+        sys.exit(0)
+
+    tests = sys.argv[1:]
+else:
+    tests = ["bb.tests.codeparser",
+             "bb.tests.cow",
+             "bb.tests.data",
+             "bb.tests.fetch",
+             "bb.tests.utils"]
 
 for t in tests:
+    t = '.'.join(t.split('.')[:3])
     __import__(t)
 
 unittest.main(argv=["bitbake-selftest"] + tests)

bitbake/bin/bitbake-worker

@@ -132,6 +132,8 @@ def fork_off_task(cfg, data, workerdata, fn, task, taskname, appends, taskdepdat
             global worker_pipe
             pipein.close()
 
+            signal.signal(signal.SIGTERM, signal.SIG_DFL)
+
             # Save out the PID so that the event can include it the
             # events
             bb.event.worker_pid = os.getpid()
@@ -242,6 +244,14 @@ class BitbakeWorker(object):
         self.build_pids = {}
         self.build_pipes = {}
     
+        signal.signal(signal.SIGTERM, self.sigterm_exception)
+
+    def sigterm_exception(self, signum, stackframe):
+        bb.warn("Worker recieved SIGTERM, shutting down...")
+        self.handle_finishnow(None)
+        signal.signal(signal.SIGTERM, signal.SIG_DFL)
+        os.kill(os.getpid(), signal.SIGTERM)
+
     def serve(self):        
         while True:
             (ready, _, _) = select.select([self.input] + [i.input for i in self.build_pipes.values()], [] , [], 1)

bitbake/bin/toaster

@@ -68,11 +68,16 @@ function addtoConfiguration()
         echo $1 >> ${BUILDDIR}/conf/$2
 }
 
+INSTOPSYSTEM=0
+
 # define the stop command
 function stop_system()
 {
+    # prevent reentry
+    if [ $INSTOPSYSTEM == 1 ]; then return; fi
+    INSTOPSYSTEM=1
     if [ -f ${BUILDDIR}/.toasterui.pid ]; then
-        kill $(< ${BUILDDIR}/.toasterui.pid )
+        kill $(< ${BUILDDIR}/.toasterui.pid ) 2>/dev/null
         rm ${BUILDDIR}/.toasterui.pid
     fi
     BBSERVER=localhost:8200 bitbake -m
@@ -80,8 +85,24 @@ function stop_system()
     webserverKillAll
     # force stop any misbehaving bitbake server
     lsof bitbake.lock | awk '{print $2}' | grep "[0-9]\+" | xargs -n1 -r kill
+    trap - SIGHUP
+    #trap - SIGCHLD
+    INSTOPSYSTEM=0
 }
 
+function check_pidbyfile() {
+    [ -e $1 ] && kill -0 $(< $1) 2>/dev/null
+}
+
+
+function notify_chldexit() {
+    if [ $NOTOASTERUI == 0 ]; then
+        check_pidbyfile ${BUILDDIR}/.toasterui.pid && return
+        stop_system
+    fi
+}
+
+
 # We make sure we're running in the current shell and in a good environment
 
 if [ -z "$ZSH_NAME" ] && [ `basename \"$0\"` = `basename \"$BASH_SOURCE\"` ]; then
@@ -143,25 +164,12 @@ if [ -e $BUILDDIR/bitbake.lock ]; then
 fi
 
 if [ ${CMD} == "start" ] && ( [ $lock -eq 0 ] || [ -e $BUILDDIR/.toastermain.pid ] ); then
-    echo "Error: bitbake lock state error. System is already on." 2>&1
-    return 3
-elif [ ${CMD} == "stop" ] && ( [ $lock -eq 1 ] || ! [ -e $BUILDDIR/.toastermain.pid ] ) ; then
-    echo "Error: bitbake lock state error. Trying to stop a stopped system ?
-If you think the system is hanged up, you can try to manually stop system with the commands
-
-# BBSERVER=localhost:8200 bitbake -m
-
-and
-
-# webserverKillAll
-" 2>&1
+    echo "Error: bitbake lock state error. File locks show that the system is on." 2>&1
+    echo "If you see problems, stop and then start the system again." 2>&1
     return 3
 fi
 
 
-
-
-
 # Execute the commands
 
 case $CMD in
@@ -192,10 +200,13 @@ case $CMD in
             stop_system
             echo "Failed ${CMD}."
         fi
+        # stop system on terminal exit
+        set -o monitor
+        trap stop_system SIGHUP
+        #trap notify_chldexit SIGCHLD
     ;;
     stop )
         stop_system
-        trap '' SIGHUP
         echo "Successful ${CMD}."
     ;;
 esac

bitbake/doc/Makefile

@@ -18,21 +18,21 @@
 #
 # Examples:
 #
-#     make DOC=user-manual
-#     make pdf DOC=user-manual
+#     make DOC=bitbake-user-manual
+#     make pdf DOC=bitbake-user-manual
 #
 # The first example generates the HTML and PDF versions of the User Manual.
-# The second example generates the HTML version only of the User Manual. 
+# The second example generates the HTML version only of the User Manual.
 #
 
-ifeq ($(DOC),user-manual)
-XSLTOPTS = --stringparam html.stylesheet user-manual-style.css \
+ifeq ($(DOC),bitbake-user-manual)
+XSLTOPTS = --stringparam html.stylesheet bitbake-user-manual-style.css \
            --stringparam  chapter.autolabel 1 \
            --stringparam  section.autolabel 1 \
            --stringparam  section.label.includes.component.label 1 \
            --xinclude
 ALLPREQ = html pdf tarball
-TARFILES = user-manual-style.css user-manual.html user-manual.pdf figures/bitbake-title.png
+TARFILES = bitbake-user-manual-style.css bitbake-user-manual.html bitbake-user-manual.pdf figures/bitbake-title.png
 MANUALS = $(DOC)/$(DOC).html $(DOC)/$(DOC).pdf
 FIGURES = figures
 STYLESHEET = $(DOC)/*.css
@@ -48,7 +48,7 @@ XSL_XHTML_URI = $(XSL_BASE_URI)/xhtml/docbook.xsl
 all: $(ALLPREQ)
 
 pdf:
-ifeq ($(DOC),user-manual)
+ifeq ($(DOC),bitbake-user-manual)
 	@echo " "
 	@echo "********** Building."$(DOC)
 	@echo " "
@@ -56,7 +56,7 @@ ifeq ($(DOC),user-manual)
 endif
 
 html:
-ifeq ($(DOC),user-manual)
+ifeq ($(DOC),bitbake-user-manual)
 #       See http://www.sagehill.net/docbookxsl/HtmlOutput.html
 	@echo " "
 	@echo "******** Building "$(DOC)
@@ -73,5 +73,19 @@ tarball: html
 validate:
 	cd $(DOC); xmllint --postvalid --xinclude --noout $(DOC).xml; cd ..
 
+publish:
+	@if test -f $(DOC)/$(DOC).html; \
+	  then \
+            echo " "; \
+            echo "******** Publishing "$(DOC)".html"; \
+            echo " "; \
+            scp -r $(MANUALS) $(STYLESHEET) docs.yp:/var/www/www.yoctoproject.org-docs/$(VER)/$(DOC); \
+            cd $(DOC); scp -r $(FIGURES) docs.yp:/var/www/www.yoctoproject.org-docs/$(VER)/$(DOC); \
+	else \
+          echo " "; \
+          echo $(DOC)".html missing.  Generate the file first then try again."; \
+          echo " "; \
+	fi
+
 clean:
 	rm -rf $(MANUALS); rm $(DOC)/$(DOC).tgz;

bitbake/doc/README

@@ -8,7 +8,7 @@ Manual Organization
 
 Folders exist for individual manuals as follows:
 
-* user-manual      - The BitBake User Manual 
+* bitbake-user-manual      - The BitBake User Manual 
 
 Each folder is self-contained regarding content and figures.
 
@@ -28,7 +28,7 @@ For example, the following command run from the documentation directory
 creates an HTML and a PDF version of the BitBake User Manual.
 The DOC variable specifies the manual you are making:
 
-     $ make DOC=user-manual
+     $ make DOC=bitbake-user-manual
 
 template
 ========

bitbake/doc/bitbake-user-manual/bitbake-user-manual-customization.xsl

@@ -5,9 +5,10 @@
 
   <xsl:param name="html.stylesheet" select="'user-manual-style.css'" />
   <xsl:param name="chapter.autolabel" select="1" />
-  <xsl:param name="appendix.autolabel" select="A" />
+<!--  <xsl:param name="appendix.autolabel" select="A" /> -->
   <xsl:param name="section.autolabel" select="1" />
   <xsl:param name="section.label.includes.component.label" select="1" />
+  <xsl:param name="appendix.autolabel">A</xsl:param>
 
 <!--  <xsl:param name="generate.toc" select="'article nop'"></xsl:param>  -->
 

bitbake/doc/bitbake-user-manual/bitbake-user-manual-execution.xml

@@ -0,0 +1,850 @@
+<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
+"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
+
+<chapter id="bitbake-user-manual-execution">
+    <title>Execution</title>
+
+    <para>
+        The primary purpose for running BitBake is to produce some kind
+        of output such as an image, a kernel, or a software development
+        kit.
+        Of course, you can execute the <filename>bitbake</filename>
+        command with options that cause it to execute single tasks,
+        compile single recipe files, capture or clear data, or simply
+        return information about the execution environment.
+    </para>
+
+    <para>
+        This chapter describes BitBake's execution process from start
+        to finish when you use it to create an image.
+        The execution process is launched using the following command
+        form:
+        <literallayout class='monospaced'>
+     $ bitbake &lt;target&gt;
+        </literallayout>
+        For information on the BitBake command and its options,
+        see
+        "<link linkend='bitbake-user-manual-command'>The BitBake Command</link>"
+        section.
+    </para>
+
+    <note>
+        Prior to executing BitBake, you should take advantage of parallel
+        thread execution by setting the
+        <link linkend='var-BB_NUMBER_THREADS'><filename>BB_NUMBER_THREADS</filename></link>
+        variable in your <filename>local.conf</filename>
+        configuration file.
+    </note>
+
+    <section id='parsing-the-base-configuration-metadata'>
+        <title>Parsing the Base Configuration Metadata</title>
+
+        <para>
+            The first thing BitBake does is parse base configuration
+            metadata.
+            Base configuration metadata consists of the
+            <filename>bblayers.conf</filename> file to determine what
+            layers BitBake needs to recognize, all necessary
+            <filename>layer.conf</filename> files (one from each layer),
+            and <filename>bitbake.conf</filename>.
+            The data itself is of various types:
+            <itemizedlist>
+                <listitem><para><emphasis>Recipes:</emphasis>
+                    Details about particular pieces of software.
+                    </para></listitem>
+                <listitem><para><emphasis>Class Data:</emphasis>
+                    An abstraction of common build information
+                    (e.g. how to build a Linux kernel).
+                    </para></listitem>
+                <listitem><para><emphasis>Configuration Data:</emphasis>
+                    Machine-specific settings, policy decisions,
+                    and so forth.
+                    Configuration data acts as the glue to bind everything
+                    together.</para></listitem>
+            </itemizedlist>
+        </para>
+
+        <para>
+            The <filename>layer.conf</filename> files are used to
+            construct key variables such as
+            <link linkend='var-BBPATH'><filename>BBPATH</filename></link>
+            and
+            <link linkend='var-BBFILES'><filename>BBFILES</filename></link>.
+            <filename>BBPATH</filename> is used to search for
+            configuration and class files under
+            <filename>conf/</filename> and <filename>class/</filename>
+            directories, respectively.
+            <filename>BBFILES</filename> is used to find recipe files
+            (<filename>.bb</filename> and <filename>.bbappend</filename>).
+            If there is no <filename>bblayers.conf</filename> file,
+            it is assumed the user has set the <filename>BBPATH</filename>
+            and <filename>BBFILES</filename> directly in the environment.
+        </para>
+
+        <para>
+            Next, the <filename>bitbake.conf</filename> file is searched
+            using the <filename>BBPATH</filename> variable that was
+            just constructed.
+            The <filename>bitbake.conf</filename> file may also include other
+            configuration files using the
+            <filename>include</filename> or
+            <filename>require</filename> directives.
+        </para>
+
+        <para>
+            Prior to parsing configuration files, Bitbake looks
+            at certain variables, including:
+            <itemizedlist>
+                <listitem><para><link linkend='var-BB_ENV_WHITELIST'><filename>BB_ENV_WHITELIST</filename></link></para></listitem>
+                <listitem><para><link linkend='var-BB_PRESERVE_ENV'><filename>BB_PRESERVE_ENV</filename></link></para></listitem>
+                <listitem><para><link linkend='var-BB_ENV_EXTRAWHITE'><filename>BB_ENV_EXTRAWHITE</filename></link></para></listitem>
+                <listitem><para>
+                    <link linkend='var-BITBAKE_UI'><filename>BITBAKE_UI</filename></link>
+                    </para></listitem>
+            </itemizedlist>
+            You can find information on how to pass environment variables into the BitBake
+            execution environment in the
+            "<link linkend='passing-information-into-the-build-task-environment'>Passing Information Into the Build Task Environment</link>" section.
+        </para>
+
+        <para>
+            The base configuration metadata is global
+            and therefore affects all recipes and tasks that are executed.
+        </para>
+
+        <para>
+            BitBake first searches the current working directory for an
+            optional <filename>conf/bblayers.conf</filename> configuration file.
+            This file is expected to contain a
+            <link linkend='var-BBLAYERS'><filename>BBLAYERS</filename></link>
+            variable that is a space delimited list of 'layer' directories.
+            Recall that if BitBake cannot find a <filename>bblayers.conf</filename>
+            file then it is assumed the user has set the <filename>BBPATH</filename>
+            and <filename>BBFILES</filename> directly in the environment.
+        </para>
+
+        <para>
+            For each directory (layer) in this list, a <filename>conf/layer.conf</filename>
+            file is searched for and parsed with the
+            <link linkend='var-LAYERDIR'><filename>LAYERDIR</filename></link>
+            variable being set to the directory where the layer was found.
+            The idea is these files automatically setup
+            <link linkend='var-BBPATH'><filename>BBPATH</filename></link>
+            and other variables correctly for a given build directory.
+        </para>
+
+        <para>
+            BitBake then expects to find the <filename>conf/bitbake.conf</filename>
+            file somewhere in the user-specified <filename>BBPATH</filename>.
+            That configuration file generally has include directives to pull
+            in any other metadata such as files specific to the architecture,
+            the machine, the local environment, and so forth.
+        </para>
+
+        <para>
+            Only variable definitions and include directives are allowed
+            in <filename>.conf</filename> files.
+            Some variables directly influence BitBake's behavior.
+            These variables might have been set from the environment
+            depending on the environment variables previously
+            mentioned or set in the configuration files.
+            The
+            "<link linkend='ref-variables-glos'>Variables Glossary</link>"
+            chapter presents a full list of variables.
+        </para>
+
+        <para>
+            After parsing configuration files, BitBake uses its rudimentary
+            inheritance mechanism, which is through class files, to inherit
+            some standard classes.
+            BitBake parses a class when the inherit directive responsible
+            for getting that class is encountered.
+        </para>
+
+        <para>
+            The <filename>base.bbclass</filename> file is always included.
+            Other classes that are specified in the configuration using the
+            <link linkend='var-INHERIT'><filename>INHERIT</filename></link>
+            variable are also included.
+            BitBake searches for class files in a "classes" subdirectory under
+            the paths in <filename>BBPATH</filename> in the same way as
+            configuration files.
+        </para>
+
+        <para>
+            A good way to get an idea of the configuration files and
+            the class files used in your execution environment is to
+            run the following BitBake command:
+            <literallayout class='monospaced'>
+     $ bitbake -e > mybb.log
+            </literallayout>
+            Examining the top of the <filename>mybb.log</filename>
+            shows you the many configuration files and class files
+            used in your execution environment.
+        </para>
+
+        <note>
+            <para>
+                You need to be aware of how BitBake parses curly braces.
+                If a recipe uses a closing curly brace within the function and
+                the character has no leading spaces, BitBake produces a parsing
+                error.
+                If you use a pair of curly brace in a shell function, the
+                closing curly brace must not be located at the start of the line
+                without leading spaces.
+            </para>
+
+            <para>
+                Here is an example that causes BitBake to produce a parsing
+                error:
+                <literallayout class='monospaced'>
+     fakeroot create_shar() {
+         cat &lt;&lt; "EOF" &gt; ${SDK_DEPLOY}/${TOOLCHAIN_OUTPUTNAME}.sh
+     usage()
+     {
+       echo "test"
+       ###### The following "}" at the start of the line causes a parsing error ######
+     }
+     EOF
+     }
+                </literallayout>
+                Writing the recipe this way avoids the error:
+                <literallayout class='monospaced'>
+     fakeroot create_shar() {
+         cat &lt;&lt; "EOF" &gt; ${SDK_DEPLOY}/${TOOLCHAIN_OUTPUTNAME}.sh
+     usage()
+     {
+       echo "test"
+       ######The following "}" with a leading space at the start of the line avoids the error ######
+      }
+     EOF
+     }
+                </literallayout>
+            </para>
+        </note>
+    </section>
+
+    <section id='locating-and-parsing-recipes'>
+        <title>Locating and Parsing Recipes</title>
+
+        <para>
+            During the configuration phase, BitBake will have set
+            <link linkend='var-BBFILES'><filename>BBFILES</filename></link>.
+            BitBake now uses it to construct a list of recipes to parse,
+            along with any append files (<filename>.bbappend</filename>)
+            to apply.
+            <filename>BBFILES</filename> is a space-separated list of
+            available files and supports wildcards.
+            An example would be:
+            <literallayout class='monospaced'>
+     BBFILES = "/path/to/bbfiles/*.bb /path/to/appends/*.bbappend"
+            </literallayout>
+            BitBake parses each recipe and append file located
+            with <filename>BBFILES</filename> and stores the values of
+            various variables into the datastore.
+            <note>
+                Append files are applied in the order they are encountered in
+                <filename>BBFILES</filename>.
+            </note>
+            For each file, a fresh copy of the base configuration is
+            made, then the recipe is parsed line by line.
+            Any inherit statements cause BitBake to find and
+            then parse class files (<filename>.bbclass</filename>)
+            using
+            <link linkend='var-BBPATH'><filename>BBPATH</filename></link>
+            as the search path.
+            Finally, BitBake parses in order any append files found in
+            <filename>BBFILES</filename>.
+        </para>
+
+        <para>
+            One common convention is to use the recipe filename to define
+            pieces of metadata.
+            For example, in <filename>bitbake.conf</filename> the recipe
+            name and version set
+            <link linkend='var-PN'><filename>PN</filename></link> and
+            <link linkend='var-PV'><filename>PV</filename></link>:
+            <literallayout class='monospaced'>
+     PV = "${@bb.parse.BBHandler.vars_from_file(d.getVar('FILE'),d)[1] or '1.0'}"
+     PN = "${@bb.parse.BBHandler.vars_from_file(d.getVar('FILE'),d)[0] or 'defaultpkgname'}"
+            </literallayout>
+            In this example, a recipe called "something_1.2.3.bb" sets
+            <filename>PN</filename> to "something" and
+            <filename>PV</filename> to "1.2.3".
+        </para>
+
+        <para>
+            By the time parsing is complete for a recipe, BitBake
+            has a list of tasks that the recipe defines and a set of
+            data consisting of keys and values as well as
+            dependency information about the tasks.
+        </para>
+
+        <para>
+            BitBake does not need all of this information.
+            It only needs a small subset of the information to make
+            decisions about the recipe.
+            Consequently, BitBake caches the values in which it is
+            interested and does not store the rest of the information.
+            Experience has shown it is faster to re-parse the metadata than to
+            try and write it out to the disk and then reload it.
+        </para>
+
+        <para>
+            Where possible, subsequent BitBake commands reuse this cache of
+            recipe information.
+            The validity of this cache is determined by first computing a
+            checksum of the base configuration data (see
+            <link linkend='var-BB_HASHCONFIG_WHITELIST'><filename>BB_HASHCONFIG_WHITELIST</filename></link>)
+            and then checking if the checksum matches.
+            If that checksum matches what is in the cache and the recipe
+            and class files have not changed, Bitbake is able to use
+            the cache.
+            BitBake then reloads the cached information about the recipe
+            instead of reparsing it from scratch.
+        </para>
+
+        <para>
+            Recipe file collections exist to allow the user to
+            have multiple repositories of
+            <filename>.bb</filename> files that contain the same
+            exact package.
+            For example, one could easily use them to make one's
+            own local copy of an upstream repository, but with
+            custom modifications that one does not want upstream.
+            Here is an example:
+            <literallayout class='monospaced'>
+    BBFILES = "/stuff/openembedded/*/*.bb /stuff/openembedded.modified/*/*.bb"
+    BBFILE_COLLECTIONS = "upstream local"
+    BBFILE_PATTERN_upstream = "^/stuff/openembedded/"
+    BBFILE_PATTERN_local = "^/stuff/openembedded.modified/"
+    BBFILE_PRIORITY_upstream = "5"
+    BBFILE_PRIORITY_local = "10"
+            </literallayout>
+            <note>
+                The layers mechanism is now the preferred method of collecting
+                code.
+                While the collections code remains, its main use is to set layer
+                priorities and to deal with overlap (conflicts) between layers.
+            </note>
+        </para>
+    </section>
+
+    <section id='bb-bitbake-providers'>
+        <title>Preferences and Providers</title>
+
+        <para>
+            Assuming BitBake has been instructed to execute a target
+            and that all the recipe files have been parsed, BitBake
+            starts to figure out how to build the target.
+            BitBake starts by looking through the
+            <link linkend='var-PROVIDES'><filename>PROVIDES</filename></link>
+            set in recipe files.
+            The default <filename>PROVIDES</filename> for a recipe is its name
+            (<link linkend='var-PN'><filename>PN</filename></link>),
+            however, a recipe can provide multiple things.
+        </para>
+
+        <para>
+            As an example of adding an extra provider, suppose a recipe named
+            <filename>foo_1.0.bb</filename> contained the following:
+            <literallayout class='monospaced'>
+     PROVIDES += "virtual/bar_1.0"
+            </literallayout>
+            The recipe now provides both "foo_1.0" and "virtual/bar_1.0".
+            The "virtual/" namespace is often used to denote cases where
+            multiple providers are expected with the user choosing between
+            them.
+            Kernels and toolchain components are common cases of this in
+            OpenEmbedded.
+        </para>
+
+        <para>
+            Sometimes a target might have multiple providers.
+            A common example is "virtual/kernel", which is provided by each
+            kernel recipe.
+            Each machine often selects the best kernel provider by using a
+            line similar to the following in the machine configuration file:
+            <literallayout class='monospaced'>
+     PREFERRED_PROVIDER_virtual/kernel = "linux-yocto"
+            </literallayout>
+            The default
+            <link linkend='var-PREFERRED_PROVIDER'><filename>PREFERRED_PROVIDER</filename></link>
+            is the provider with the same name as the target.
+            Bitbake iterates through each target it needs to build and
+            resolves them and their dependencies using this process.
+        </para>
+
+        <para>
+            Understanding how providers are chosen is made complicated by the fact
+            that multiple versions might exist.
+            BitBake defaults to the highest version of a provider.
+            Version comparisons are made using the same method as Debian.
+            You can use the
+            <link linkend='var-PREFERRED_VERSION'><filename>PREFERRED_VERSION</filename></link>
+            variable to specify a particular version.
+            You can influence the order by using the
+            <link linkend='var-DEFAULT_PREFERENCE'><filename>DEFAULT_PREFERENCE</filename></link>
+            variable.
+            By default, files have a preference of "0".
+            Setting the <filename>DEFAULT_PREFERENCE</filename> to "-1" makes the
+            recipe unlikely to be used unless it is explicitly referenced.
+            Setting the <filename>DEFAULT_PREFERENCE</filename> to "1" makes it likely the recipe is used.
+            <filename>PREFERRED_VERSION</filename> overrides any <filename>DEFAULT_PREFERENCE</filename> setting.
+            <filename>DEFAULT_PREFERENCE</filename> is often used to mark newer and more experimental recipe
+            versions until they have undergone sufficient testing to be considered stable.
+        </para>
+
+        <para>
+            When there are multiple “versions” of a given recipe,
+            BitBake defaults to selecting the most recent
+            version, unless otherwise specified.
+            If the recipe in question has a
+            <link linkend='var-DEFAULT_PREFERENCE'><filename>DEFAULT_PREFERENCE</filename></link>
+            set lower than
+            the other recipes (default is 0), then it will not be
+            selected.
+            This allows the person or persons maintaining
+            the repository of recipe files to specify
+            their preference for the default selected version.
+            In addition, the user can specify their preferred version.
+        </para>
+
+        <para>
+            If the first recipe is named <filename>a_1.1.bb</filename>,
+            then the
+            <link linkend='var-PN'><filename>PN</filename></link> variable
+            will be set to “a”, and the
+            <link linkend='var-PV'><filename>PV</filename></link>
+            variable will be set to 1.1.
+        </para>
+
+        <para>
+            If we then have a recipe named <filename>a_1.2.bb</filename>, BitBake
+            will choose 1.2 by default.
+            However, if we define the following variable in a
+            <filename>.conf</filename> file that BitBake parses, we
+            can change that.
+            <literallayout class='monospaced'>
+     PREFERRED_VERSION_a = "1.1"
+            </literallayout>
+        </para>
+
+        <para>
+            In summary, BitBake has created a list of providers, which is prioritized, for each target.
+        </para>
+    </section>
+
+    <section id='bb-bitbake-dependencies'>
+        <title>Dependencies</title>
+
+        <para>
+            Each target BitBake builds consists of multiple tasks such as
+            <filename>fetch</filename>, <filename>unpack</filename>,
+            <filename>patch</filename>, <filename>configure</filename>,
+            and <filename>compile</filename>.
+            For best performance on multi-core systems, BitBake considers each
+            task as an independent
+            entity with its own set of dependencies.
+        </para>
+
+        <para>
+            Dependencies are defined through several variables.
+            You can find information about variables BitBake uses in
+            the <link linkend='ref-variables-glos'>Variables Glossary</link>
+            near the end of this manual.
+            At a basic level, it is sufficient to know that BitBake uses the
+            <link linkend='var-DEPENDS'><filename>DEPENDS</filename></link> and
+            <link linkend='var-RDEPENDS'><filename>RDEPENDS</filename></link> variables when
+            calculating dependencies.
+        </para>
+
+        <para>
+            For more information on how BitBake handles dependencies, see the
+            "<link linkend='dependencies'>Dependencies</link>" section.
+        </para>
+    </section>
+
+    <section id='ref-bitbake-tasklist'>
+        <title>The Task List</title>
+
+        <para>
+            Based on the generated list of providers and the dependency information,
+            BitBake can now calculate exactly what tasks it needs to run and in what
+            order it needs to run them.
+            The
+            "<link linkend='executing-tasks'>Executing Tasks</link>" section has more
+            information on how BitBake chooses which task to execute next.
+        </para>
+
+        <para>
+            The build now starts with BitBake forking off threads up to the limit set in the
+            <link linkend='var-BB_NUMBER_THREADS'><filename>BB_NUMBER_THREADS</filename></link>
+            variable.
+            BitBake continues to fork threads as long as there are tasks ready to run,
+            those tasks have all their dependencies met, and the thread threshold has not been
+            exceeded.
+        </para>
+
+        <para>
+            It is worth noting that you can greatly speed up the build time by properly setting
+            the <filename>BB_NUMBER_THREADS</filename> variable.
+        </para>
+
+        <para>
+            As each task completes, a timestamp is written to the directory specified by the
+            <link linkend='var-STAMP'><filename>STAMP</filename></link> variable.
+            On subsequent runs, BitBake looks in the build directory within
+            <filename>tmp/stamps</filename>and does not rerun
+            tasks that are already completed unless a timestamp is found to be invalid.
+            Currently, invalid timestamps are only considered on a per
+            recipe file basis.
+            So, for example, if the configure stamp has a timestamp greater than the
+            compile timestamp for a given target, then the compile task would rerun.
+            Running the compile task again, however, has no effect on other providers
+            that depend on that target.
+        </para>
+
+        <para>
+            The exact format of the stamps is partly configurable.
+            In modern versions of BitBake, a hash is appended to the
+            stamp so that if the configuration changes, the stamp becomes
+            invalid and the task is automatically rerun.
+            This hash, or signature used, is governed by the signature policy
+            that is configured (see the
+            "<link linkend='checksums'>Checksums (Signatures)</link>"
+            section for information).
+            It is also possible to append extra metadata to the stamp using
+            the "stamp-extra-info" task flag.
+            For example, OpenEmbedded uses this flag to make some tasks machine-specific.
+        </para>
+
+        <note>
+            Some tasks are marked as "nostamp" tasks.
+            No timestamp file is created when these tasks are run.
+            Consequently, "nostamp" tasks are always rerun.
+        </note>
+
+        <para>
+            For more information on tasks, see the
+            "<link linkend='tasks'>Tasks</link>" section.
+        </para>
+    </section>
+
+    <section id='executing-tasks'>
+        <title>Executing Tasks</title>
+
+        <para>
+            Tasks can either be a shell task or a Python task.
+            For shell tasks, BitBake writes a shell script to
+            <filename>${</filename><link linkend='var-T'><filename>T</filename></link><filename>}/run.do_taskname.pid</filename>
+            and then executes the script.
+            The generated shell script contains all the exported variables,
+            and the shell functions with all variables expanded.
+            Output from the shell script goes to the file
+            <filename>${T}/log.do_taskname.pid</filename>.
+            Looking at the expanded shell functions in the run file and
+            the output in the log files is a useful debugging technique.
+        </para>
+
+        <para>
+            For Python tasks, BitBake executes the task internally and logs
+            information to the controlling terminal.
+            Future versions of BitBake will write the functions to files
+            similar to the way shell tasks are handled.
+            Logging will be handled in a way similar to shell tasks as well.
+        </para>
+
+        <para>
+            The order in which BitBake runs the tasks is controlled by its
+            task scheduler.
+            It is possible to configure the scheduler and define custom
+            implementations for specific use cases.
+            For more information, see these variables that control the
+            behavior:
+            <itemizedlist>
+                <listitem><para>
+                    <link linkend='var-BB_SCHEDULER'><filename>BB_SCHEDULER</filename></link>
+                    </para></listitem>
+                <listitem><para>
+                    <link linkend='var-BB_SCHEDULERS'><filename>BB_SCHEDULERS</filename></link>
+                    </para></listitem>
+            </itemizedlist>
+            It is possible to have functions run before and after a task's main
+            function.
+            This is done using the "prefuncs" and "postfuncs" flags of the task
+            that lists the functions to run.
+        </para>
+    </section>
+
+    <section id='checksums'>
+        <title>Checksums (Signatures)</title>
+
+        <para>
+            A checksum is a unique signature of a task's inputs.
+            The signature of a task can be used to determine if a task
+            needs to be run.
+            Because it is a change in a task's inputs that triggers running
+            the task, BitBake needs to detect all the inputs to a given task.
+            For shell tasks, this turns out to be fairly easy because
+            BitBake generates a "run" shell script for each task and
+            it is possible to create a checksum that gives you a good idea of when
+            the task's data changes.
+        </para>
+
+        <para>
+            To complicate the problem, some things should not be included in
+            the checksum.
+            First, there is the actual specific build path of a given task -
+            the working directory.
+            It does not matter if the working directory changes because it should not
+            affect the output for target packages.
+            The simplistic approach for excluding the working directory is to set
+            it to some fixed value and create the checksum for the "run" script.
+            BitBake goes one step better and uses the
+            <link linkend='var-BB_HASHBASE_WHITELIST'><filename>BB_HASHBASE_WHITELIST</filename></link>
+            variable to define a list of variables that should never be included
+            when generating the signatures.
+        </para>
+
+        <para>
+            Another problem results from the "run" scripts containing functions that
+            might or might not get called.
+            The incremental build solution contains code that figures out dependencies
+            between shell functions.
+            This code is used to prune the "run" scripts down to the minimum set,
+            thereby alleviating this problem and making the "run" scripts much more
+            readable as a bonus.
+        </para>
+
+        <para>
+            So far we have solutions for shell scripts.
+            What about Python tasks?
+            The same approach applies even though these tasks are more difficult.
+            The process needs to figure out what variables a Python function accesses
+            and what functions it calls.
+            Again, the incremental build solution contains code that first figures out
+            the variable and function dependencies, and then creates a checksum for the data
+            used as the input to the task.
+        </para>
+
+        <para>
+            Like the working directory case, situations exist where dependencies
+            should be ignored.
+            For these cases, you can instruct the build process to ignore a dependency
+            by using a line like the following:
+            <literallayout class='monospaced'>
+     PACKAGE_ARCHS[vardepsexclude] = "MACHINE"
+            </literallayout>
+            This example ensures that the <filename>PACKAGE_ARCHS</filename> variable does not
+            depend on the value of <filename>MACHINE</filename>, even if it does reference it.
+        </para>
+
+        <para>
+            Equally, there are cases where we need to add dependencies BitBake
+            is not able to find.
+            You can accomplish this by using a line like the following:
+            <literallayout class='monospaced'>
+      PACKAGE_ARCHS[vardeps] = "MACHINE"
+            </literallayout>
+            This example explicitly adds the <filename>MACHINE</filename> variable as a
+            dependency for <filename>PACKAGE_ARCHS</filename>.
+        </para>
+
+        <para>
+            Consider a case with in-line Python, for example, where BitBake is not
+            able to figure out dependencies.
+            When running in debug mode (i.e. using <filename>-DDD</filename>), BitBake
+            produces output when it discovers something for which it cannot figure out
+            dependencies.
+        </para>
+
+        <para>
+            Thus far, this section has limited discussion to the direct inputs into a task.
+            Information based on direct inputs is referred to as the "basehash" in the
+            code.
+            However, there is still the question of a task's indirect inputs - the
+            things that were already built and present in the build directory.
+            The checksum (or signature) for a particular task needs to add the hashes
+            of all the tasks on which the particular task depends.
+            Choosing which dependencies to add is a policy decision.
+            However, the effect is to generate a master checksum that combines the basehash
+            and the hashes of the task's dependencies.
+        </para>
+
+        <para>
+            At the code level, there are a variety of ways both the basehash and the
+            dependent task hashes can be influenced.
+            Within the BitBake configuration file, we can give BitBake some extra information
+            to help it construct the basehash.
+            The following statement effectively results in a list of global variable
+            dependency excludes - variables never included in any checksum.
+            This example uses variables from OpenEmbedded to help illustrate
+            the concept:
+            <literallayout class='monospaced'>
+     BB_HASHBASE_WHITELIST ?= "TMPDIR FILE PATH PWD BB_TASKHASH BBPATH DL_DIR \
+         SSTATE_DIR THISDIR FILESEXTRAPATHS FILE_DIRNAME HOME LOGNAME SHELL TERM \
+         USER FILESPATH STAGING_DIR_HOST STAGING_DIR_TARGET COREBASE PRSERV_HOST \
+         PRSERV_DUMPDIR PRSERV_DUMPFILE PRSERV_LOCKDOWN PARALLEL_MAKE \
+         CCACHE_DIR EXTERNAL_TOOLCHAIN CCACHE CCACHE_DISABLE LICENSE_PATH SDKPKGSUFFIX"
+            </literallayout>
+            The previous example excludes the work directory, which is part of
+            <filename>TMPDIR</filename>.
+        </para>
+
+        <para>
+            The rules for deciding which hashes of dependent tasks to include through
+            dependency chains are more complex and are generally accomplished with a
+            Python function.
+            The code in <filename>meta/lib/oe/sstatesig.py</filename> shows two examples
+            of this and also illustrates how you can insert your own policy into the system
+            if so desired.
+            This file defines the two basic signature generators OpenEmbedded Core
+            uses:  "OEBasic" and "OEBasicHash".
+            By default, there is a dummy "noop" signature handler enabled in BitBake.
+            This means that behavior is unchanged from previous versions.
+            <filename>OE-Core</filename> uses the "OEBasicHash" signature handler by default
+            through this setting in the <filename>bitbake.conf</filename> file:
+            <literallayout class='monospaced'>
+     BB_SIGNATURE_HANDLER ?= "OEBasicHash"
+            </literallayout>
+            The "OEBasicHash" <filename>BB_SIGNATURE_HANDLER</filename> is the same as the
+            "OEBasic" version but adds the task hash to the stamp files.
+            This results in any metadata change that changes the task hash, automatically
+            causing the task to be run again.
+            This removes the need to bump
+            <link linkend='var-PR'><filename>PR</filename></link>
+            values, and changes to metadata automatically ripple across the build.
+        </para>
+
+        <para>
+            It is also worth noting that the end result of these signature generators is to
+            make some dependency and hash information available to the build.
+            This information includes:
+            <itemizedlist>
+                <listitem><para><filename>BB_BASEHASH_task-&lt;taskname&gt;</filename>:
+                    The base hashes for each task in the recipe.
+                    </para></listitem>
+                <listitem><para><filename>BB_BASEHASH_&lt;filename:taskname&gt;</filename>:
+                    The base hashes for each dependent task.
+                    </para></listitem>
+                <listitem><para><filename>BBHASHDEPS_&lt;filename:taskname&gt;</filename>:
+                    The task dependencies for each task.
+                    </para></listitem>
+                <listitem><para><filename>BB_TASKHASH</filename>:
+                    The hash of the currently running task.
+                    </para></listitem>
+            </itemizedlist>
+        </para>
+
+        <para>
+            It is worth noting that BitBake's "-S" option lets you
+            debug Bitbake's processing of signatures.
+            The options passed to -S allow different debugging modes
+            to be used, either using BitBake's own debug functions
+            or possibly those defined in the metadata/signature handler
+            itself.
+            The simplest parameter to pass is "none", which causes a
+            set of signature information to be written out into
+            <filename>STAMP_DIR</filename>
+            corresponding to the targets specified.
+            The other currently available parameter is "printdiff",
+            which causes BitBake to try to establish the closest
+            signature match it can (e.g. in the sstate cache) and then
+            run <filename>bitbake-diffsigs</filename> over the matches
+            to determine the stamps and delta where these two
+            stamp trees diverge.
+            <note>
+                It is likely that future versions of BitBake with
+                provide other signature handlers triggered through
+                additional "-S" paramters.
+            </note>
+        </para>
+
+        <para>
+            You can find more information on checksum metadata in the
+            "<link linkend='task-checksums-and-setscene'>Task Checksums and Setscene</link>"
+            section.
+        </para>
+    </section>
+
+    <section id='setscene'>
+        <title>Setscene</title>
+
+        <para>
+            The setscene process enables BitBake to handle "pre-built" artifacts.
+            The ability to handle and reuse these artifacts allows BitBake
+            the luxury of not having to build something from scratch every time.
+            Instead, BitBake can use, when possible, existing build artifacts.
+        </para>
+
+        <para>
+            BitBake needs to have reliable data indicating whether or not an
+            artifact is compatible.
+            Signatures, described in the previous section, provide an ideal
+            way of representing whether an artifact is compatible.
+            If a signature is the same, an object can be reused.
+        </para>
+
+        <para>
+            If an object can be reused, the problem then becomes how to
+            replace a given task or set of tasks with the pre-built artifact.
+            BitBake solves the problem with the "setscene" process.
+        </para>
+
+        <para>
+            When BitBake is asked to build a given target, before building anything,
+            it first asks whether cached information is available for any of the
+            targets it's building, or any of the intermediate targets.
+            If cached information is available, BitBake uses this information instead of
+            running the main tasks.
+        </para>
+
+        <para>
+            BitBake first calls the function defined by the
+            <link linkend='var-BB_HASHCHECK_FUNCTION'><filename>BB_HASHCHECK_FUNCTION</filename></link>
+            variable with a list of tasks and corresponding
+            hashes it wants to build.
+            This function is designed to be fast and returns a list
+            of the tasks for which it believes in can obtain artifacts.
+        </para>
+
+        <para>
+            Next, for each of the tasks that were returned as possibilities,
+            BitBake executes a setscene version of the task that the possible
+            artifact covers.
+            Setscene versions of a task have the string "_setscene" appended to the
+            task name.
+            So, for example, the task with the name <filename>xxx</filename> has
+            a setscene task named <filename>xxx_setscene</filename>.
+            The setscene version of the task executes and provides the necessary
+            artifacts returning either success or failure.
+        </para>
+
+        <para>
+            As previously mentioned, an artifact can cover more than one task.
+            For example, it is pointless to obtain a compiler if you
+            already have the compiled binary.
+            To handle this, BitBake calls the
+            <link linkend='var-BB_SETSCENE_DEPVALID'><filename>BB_SETSCENE_DEPVALID</filename></link>
+            function for each successful setscene task to know whether or not it needs
+            to obtain the dependencies of that task.
+        </para>
+
+        <para>
+            Finally, after all the setscene tasks have executed, BitBake calls the
+            function listed in
+            <link linkend='var-BB_SETSCENE_VERIFY_FUNCTION'><filename>BB_SETSCENE_VERIFY_FUNCTION</filename></link>
+            with the list of tasks BitBake thinks has been "covered".
+            The metadata can then ensure that this list is correct and can
+            inform BitBake that it wants specific tasks to be run regardless
+            of the setscene result.
+        </para>
+
+        <para>
+            You can find more information on setscene metadata in the
+            "<link linkend='task-checksums-and-setscene'>Task Checksums and Setscene</link>"
+            section.
+        </para>
+    </section>
+</chapter>

bitbake/doc/bitbake-user-manual/bitbake-user-manual-fetching.xml

@@ -0,0 +1,622 @@
+<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
+"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
+
+<chapter>
+<title>File Download Support</title>
+
+    <para>
+        BitBake's fetch module is a standalone piece of library code
+        that deals with the intricacies of downloading source code
+        and files from remote systems.
+        Fetching source code is one of the corner stones of building software.
+        As such, this module forms an important part of BitBake.
+    </para>
+
+    <para>
+        The current fetch module is called "fetch2" and refers to the
+        fact that it is the second major version of the API.
+        The original version is obsolete and removed from the codebase.
+        Thus, in all cases, "fetch" refers to "fetch2" in this
+        manual.
+    </para>
+
+    <section id='the-download-fetch'>
+        <title>The Download (Fetch)</title>
+
+        <para>
+            BitBake takes several steps when fetching source code or files.
+            The fetcher codebase deals with two distinct processes in order:
+            obtaining the files from somewhere (cached or otherwise)
+            and then unpacking those files into a specific location and
+            perhaps in a specific way.
+            Getting and unpacking the files is often optionally followed
+            by patching.
+            Patching, however, is not covered by this module.
+        </para>
+
+        <para>
+            The code to execute the first part of this process, a fetch,
+            looks something like the following:
+            <literallayout class='monospaced'>
+     src_uri = (d.getVar('SRC_URI', True) or "").split()
+     fetcher = bb.fetch2.Fetch(src_uri, d)
+     fetcher.download()
+            </literallayout>
+            This code sets up an instance of the fetch class.
+            The instance uses a space-separated list of URLs from the
+            <link linkend='var-SRC_URI'><filename>SRC_URI</filename></link>
+            variable and then calls the <filename>download</filename>
+            method to download the files.
+        </para>
+
+        <para>
+            The instantiation of the fetch class is usually followed by:
+            <literallayout class='monospaced'>
+     rootdir = l.getVar('WORKDIR', True)
+     fetcher.unpack(rootdir)
+            </literallayout>
+            This code unpacks the downloaded files to the
+            specified by <filename>WORKDIR</filename>.
+            <note>
+                For convenience, the naming in these examples matches
+                the variables used by OpenEmbedded.
+            </note>
+            The <filename>SRC_URI</filename> and <filename>WORKDIR</filename>
+            variables are not coded into the fetcher.
+            They variables can (and are) called with different variable names.
+            In OpenEmbedded for example, the shared state (sstate) code uses
+            the fetch module to fetch the sstate files.
+        </para>
+
+        <para>
+            When the <filename>download()</filename> method is called,
+            BitBake tries to fulfill the URLs by looking for source files
+            in a specific search order:
+            <itemizedlist>
+                <listitem><para><emphasis>Pre-mirror Sites:</emphasis>
+                    BitBake first uses pre-mirrors to try and find source files.
+                    These locations are defined using the
+                    <link linkend='var-PREMIRRORS'><filename>PREMIRRORS</filename></link>
+                    variable.
+                    </para></listitem>
+                <listitem><para><emphasis>Source URI:</emphasis>
+                    If pre-mirrors fail, BitBake uses the original URL (e.g from
+                    <filename>SRC_URI</filename>).
+                    </para></listitem>
+                <listitem><para><emphasis>Mirror Sites:</emphasis>
+                    If fetch failures occur, BitBake next uses mirror location as
+                    defined by the
+                    <link linkend='var-MIRRORS'><filename>MIRRORS</filename></link>
+                    variable.
+                    </para></listitem>
+            </itemizedlist>
+        </para>
+
+        <para>
+            For each URL passed to the fetcher, the fetcher
+            calls the submodule that handles that particular URL type.
+            This behavior can be the source of some confusion when you
+            are providing URLs for the <filename>SRC_URI</filename>
+            variable.
+            Consider the following two URLs:
+            <literallayout class='monospaced'>
+     http://git.yoctoproject.org/git/poky;protocol=git
+     git://git.yoctoproject.org/git/poky;protocol=http
+            </literallayout>
+            In the former case, the URL is passed to the
+            <filename>wget</filename> fetcher, which does not
+            understand "git".
+            Therefore, the latter case is the correct form since the
+            Git fetcher does know how to use HTTP as a transport.
+        </para>
+
+        <para>
+            Here are some examples that show commonly used mirror
+            definitions:
+            <literallayout class='monospaced'>
+     PREMIRRORS ?= "\
+         bzr://.*/.*   http://somemirror.org/sources/ \n \
+         cvs://.*/.*   http://somemirror.org/sources/ \n \
+         git://.*/.*   http://somemirror.org/sources/ \n \
+         hg://.*/.*    http://somemirror.org/sources/ \n \
+         osc://.*/.*   http://somemirror.org/sources/ \n \
+         p4://.*/.*    http://somemirror.org/sources/ \n \
+         svn://.*/.*   http://somemirror.org/sources/ \n"
+
+     MIRRORS =+ "\
+         ftp://.*/.*      http://somemirror.org/sources/ \n \
+         http://.*/.*     http://somemirror.org/sources/ \n \
+         https://.*/.*    http://somemirror.org/sources/ \n"
+            </literallayout>
+            It is useful to note that BitBake supports
+            cross-URLs.
+            It is possible to mirror a Git repository on an HTTP
+            server as a tarball.
+            This is what the <filename>git://</filename> mapping in
+            the previous example does.
+        </para>
+
+        <para>
+            Since network accesses are slow, Bitbake maintains a
+            cache of files downloaded from the network.
+            Any source files that are not local (i.e.
+            downloaded from the Internet) are placed into the download
+            directory, which is specified by the
+            <link linkend='var-DL_DIR'><filename>DL_DIR</filename></link>
+            variable.
+        </para>
+
+        <para>
+            File integrity is of key importance for reproducing builds.
+            For non-local archive downloads, the fetcher code can verify
+            sha256 and md5 checksums to ensure the archives have been
+            downloaded correctly.
+            You can specify these checksums by using the
+            <filename>SRC_URI</filename> variable with the appropriate
+            varflags as follows:
+            <literallayout class='monospaced'>
+     SRC_URI[md5sum] = "value"
+     SRC_URI[sha256sum] = "value"
+            </literallayout>
+            You can also specify the checksums as parameters on the
+            <filename>SRC_URI</filename> as shown below:
+            <literallayout class='monospaced'>
+     SRC_URI = "http://example.com/foobar.tar.bz2;md5sum=4a8e0f237e961fd7785d19d07fdb994d"
+            </literallayout>
+            If multiple URIs exist, you can specify the checksums either
+            directly as in the previous example, or you can name the URLs.
+            The following syntax shows how you name the URIs:
+            <literallayout class='monospaced'>
+     SRC_URI = "http://example.com/foobar.tar.bz2;name=foo"
+     SRC_URI[foo.md5sum] = 4a8e0f237e961fd7785d19d07fdb994d
+            </literallayout>
+            After a file has been downloaded and has had its checksum checked,
+            a ".done" stamp is placed in <filename>DL_DIR</filename>.
+            BitBake uses this stamp during subsequent builds to avoid
+            downloading or comparing a checksum for the file again.
+            <note>
+                It is assumed that local storage is safe from data corruption.
+                If this were not the case, there would be bigger issues to worry about.
+            </note>
+        </para>
+
+        <para>
+            If
+            <link linkend='var-BB_STRICT_CHECKSUM'><filename>BB_STRICT_CHECKSUM</filename></link>
+            is set, any download without a checksum triggers an
+            error message.
+            The
+            <link linkend='var-BB_NO_NETWORK'><filename>BB_NO_NETWORK</filename></link>
+            variable can be used to make any attempted network access a fatal
+            error, which is useful for checking that mirrors are complete
+            as well as other things.
+        </para>
+    </section>
+
+    <section id='bb-the-unpack'>
+        <title>The Unpack</title>
+
+        <para>
+            The unpack process usually immediately follows the download.
+            For all URLs except Git URLs, BitBake uses the common
+            <filename>unpack</filename> method.
+        </para>
+
+        <para>
+            A number of parameters exist that you can specify within the
+            URL to govern the behavior of the unpack stage:
+            <itemizedlist>
+                <listitem><para><emphasis>unpack:</emphasis>
+                    Controls whether the URL components are unpacked.
+                    If set to "1", which is the default, the components
+                    are unpacked.
+                    If set to "0", the unpack stage leaves the file alone.
+                    This parameter is useful when you want an archive to be
+                    copied in and not be unpacked.
+                    </para></listitem>
+                <listitem><para><emphasis>dos:</emphasis>
+                    Applies to <filename>.zip</filename> and
+                    <filename>.jar</filename> files and specifies whether to
+                    use DOS line ending conversion on text files.
+                    </para></listitem>
+                <listitem><para><emphasis>basepath:</emphasis>
+                    Instructs the unpack stage to strip the specified
+                    directories from the source path when unpacking.
+                    </para></listitem>
+                <listitem><para><emphasis>subdir:</emphasis>
+                    Unpacks the specific URL to the specified subdirectory
+                    within the root directory.
+                    </para></listitem>
+            </itemizedlist>
+            The unpack call automatically decompresses and extracts files
+            with ".Z", ".z", ".gz", ".xz", ".zip", ".jar", ".ipk", ".rpm".
+            ".srpm", ".deb" and ".bz2" extensions as well as various combinations
+            of tarball extensions.
+        </para>
+
+        <para>
+            As mentioned, the Git fetcher has its own unpack method that
+            is optimized to work with Git trees.
+            Basically, this method works by cloning the tree into the final
+            directory.
+            The process is completed using references so that there is
+            only one central copy of the Git metadata needed.
+        </para>
+    </section>
+
+    <section id='bb-fetchers'>
+        <title>Fetchers</title>
+
+        <para>
+            As mentioned earlier, the URL prefix determines which
+            fetcher submodule BitBake uses.
+            Each submodule can support different URL parameters,
+            which are described in the following sections.
+        </para>
+
+        <section id='local-file-fetcher'>
+            <title>Local file fetcher (<filename>file://</filename>)</title>
+
+            <para>
+                This submodule handles URLs that begin with
+                <filename>file://</filename>.
+                The filename you specify with in the URL can
+                either be an absolute or relative path to a file.
+                If the filename is relative, the contents of the
+                <link linkend='var-FILESPATH'><filename>FILESPATH</filename></link>
+                variable is used in the same way
+                <filename>PATH</filename> is used to find executables.
+                Failing that,
+                <link linkend='var-FILESDIR'><filename>FILESDIR</filename></link>
+                is used to find the appropriate relative file.
+                <note>
+                    <filename>FILESDIR</filename> is deprecated and can
+                    be replaced with <filename>FILESPATH</filename>.
+                    Because <filename>FILESDIR</filename> is likely to be
+                    removed, you should not use this variable in any new code.
+                </note>
+                If the file cannot be found, it is assumed that it is available in
+                <link linkend='var-DL_DIR'><filename>DL_DIR</filename></link>
+                by the time the <filename>download()</filename> method is called.
+            </para>
+
+            <para>
+                If you specify a directory, the entire directory is
+                unpacked.
+            </para>
+
+            <para>
+                Here are some example URLs:
+                <literallayout class='monospaced'>
+     SRC_URI = "file://relativefile.patch"
+     SRC_URI = "file://relativefile.patch;this=ignored"
+     SRC_URI = "file:///Users/ich/very_important_software"
+                </literallayout>
+            </para>
+        </section>
+
+        <section id='cvs-fetcher'>
+            <title>CVS fetcher (<filename>(cvs://</filename>)</title>
+
+            <para>
+                This submodule handles checking out files from the
+                CVS version control system.
+                You can configure it using a number of different variables:
+                <itemizedlist>
+                    <listitem><para><emphasis><filename>FETCHCMD_cvs</filename>:</emphasis>
+                        The name of the executable to use when running
+                        the <filename>cvs</filename> command.
+                        This name is usually "cvs".
+                        </para></listitem>
+                    <listitem><para><emphasis><filename>SRCDATE</filename>:</emphasis>
+                        The date to use when fetching the CVS source code.
+                        A special value of "now" causes the checkout to
+                        be updated on every build.
+                        </para></listitem>
+                    <listitem><para><emphasis><filename>CVSDIR</filename>:</emphasis>
+                        Specifies where a temporary checkout is saved.
+                        The location is often <filename>DL_DIR/cvs</filename>.
+                        </para></listitem>
+                    <listitem><para><emphasis><filename>CVS_PROXY_HOST</filename>:</emphasis>
+                        The name to use as a "proxy=" parameter to the
+                        <filename>cvs</filename> command.
+                        </para></listitem>
+                    <listitem><para><emphasis><filename>CVS_PROXY_PORT</filename>:</emphasis>
+                        The port number to use as a "proxyport=" parameter to
+                        the <filename>cvs</filename> command.
+                        </para></listitem>
+                </itemizedlist>
+                As well as the standard username and password URL syntax,
+                you can also configure the fetcher with various URL parameters:
+            </para>
+
+            <para>
+                The supported parameters are as follows:
+                <itemizedlist>
+                    <listitem><para><emphasis>"method":</emphasis>
+                        The protocol over which to communicate with the cvs server.
+                        By default, this protocol is "pserver".
+                        If "method" is set to "ext", BitBake examines the
+                        "rsh" parameter and sets <filename>CVS_RSH</filename>.
+                        You can use "dir" for local directories.
+                        </para></listitem>
+                    <listitem><para><emphasis>"module":</emphasis>
+                        Specifies the module to check out.
+                        You must supply this parameter.
+                        </para></listitem>
+                    <listitem><para><emphasis>"tag":</emphasis>
+                        Describes which CVS TAG should be used for
+                        the checkout.
+                        By default, the TAG is empty.
+                        </para></listitem>
+                    <listitem><para><emphasis>"date":</emphasis>
+                        Specifies a date.
+                        If no "date" is specified, the
+                        <link linkend='var-SRCDATE'><filename>SRCDATE</filename></link>
+                        of the configuration is used to checkout a specific date.
+                        The special value of "now" causes the checkout to be
+                        updated on every build.
+                        </para></listitem>
+                    <listitem><para><emphasis>"localdir":</emphasis>
+                        Used to rename the module.
+                        Effectively, you are renaming the output directory
+                        to which the module is unpacked.
+                        You are forcing the module into a special
+                        directory relative to <filename>CVSDIR</filename>.
+                        </para></listitem>
+                    <listitem><para><emphasis>"rsh"</emphasis>
+                        Used in conjunction with the "method" parameter.
+                        </para></listitem>
+                    <listitem><para><emphasis>"scmdata":</emphasis>
+                        Causes the CVS metadata to be maintained in the tarball
+                        the fetcher creates when set to "keep".
+                        The tarball is expanded into the work directory.
+                        By default, the CVS metadata is removed.
+                        </para></listitem>
+                    <listitem><para><emphasis>"fullpath":</emphasis>
+                        Controls whether the resulting checkout is at the
+                        module level, which is the default, or is at deeper
+                        paths.
+                        </para></listitem>
+                    <listitem><para><emphasis>"norecurse":</emphasis>
+                        Causes the fetcher to only checkout the specified
+                        directory with no recurse into any subdirectories.
+                        </para></listitem>
+                    <listitem><para><emphasis>"port":</emphasis>
+                        The port to which the CVS server connects.
+                        </para></listitem>
+                </itemizedlist>
+                Some example URLs are as follows:
+                <literallayout class='monospaced'>
+     SRC_URI = "cvs://CVSROOT;module=mymodule;tag=some-version;method=ext"
+     SRC_URI = "cvs://CVSROOT;module=mymodule;date=20060126;localdir=usethat"
+                </literallayout>
+            </para>
+        </section>
+
+        <section id='http-ftp-fetcher'>
+            <title>HTTP/FTP wget fetcher (<filename>http://</filename>, <filename>ftp://</filename>, <filename>https://</filename>)</title>
+
+            <para>
+                This fetcher obtains files from web and FTP servers.
+                Internally, the fetcher uses the wget utility.
+            </para>
+
+            <para>
+                The executable and parameters used are specified by the
+                <filename>FETCHCMD_wget</filename> variable, which defaults
+                to a sensible values.
+                The fetcher supports a parameter "downloadfilename" that
+                allows the name of the downloaded file to be specified.
+                Specifying the name of the downloaded file is useful
+                for avoiding collisions in
+                <link linkend='var-DL_DIR'><filename>DL_DIR</filename></link>
+                when dealing with multiple files that have the same name.
+            </para>
+
+            <para>
+                Some example URLs are as follows:
+                <literallayout class='monospaced'>
+     SRC_URI = "http://oe.handhelds.org/not_there.aac"
+     SRC_URI = "ftp://oe.handhelds.org/not_there_as_well.aac"
+     SRC_URI = "ftp://you@oe.handheld.sorg/home/you/secret.plan"
+                </literallayout>
+            </para>
+        </section>
+
+        <section id='svn-fetcher'>
+            <title>Subversion (SVN) Fetcher (<filename>svn://</filename>)</title>
+
+            <para>
+                This fetcher submodule fetches code from the
+                Subversion source control system.
+                The executable used is specified by
+                <filename>FETCHCMD_svn</filename>, which defaults
+                to "svn".
+                The fetcher's temporary working directory is set
+                by <filename>SVNDIR</filename>, which is usually
+                <filename>DL_DIR/svn</filename>.
+            </para>
+
+            <para>
+                The supported parameters are as follows:
+                <itemizedlist>
+                    <listitem><para><emphasis>"module":</emphasis>
+                        The name of the svn module to checkout.
+                        You must provide this parameter.
+                        You can think of this parameter as the top-level
+                        directory of the repository data you want.
+                        </para></listitem>
+                    <listitem><para><emphasis>"protocol":</emphasis>
+                        The protocol to use, which defaults to "svn".
+                        Other options are "svn+ssh" and "rsh".
+                        For "rsh", the "rsh" parameter is also used.
+                        </para></listitem>
+                    <listitem><para><emphasis>"rev":</emphasis>
+                        The revision of the source code to checkout.
+                        </para></listitem>
+                    <listitem><para><emphasis>"date":</emphasis>
+                        The date of the source code to checkout.
+                        Specific revisions are generally much safer to checkout
+                        rather than by date as they do not involve timezones
+                        (e.g. they are much more deterministic).
+                        </para></listitem>
+                    <listitem><para><emphasis>"scmdata":</emphasis>
+                        Causes the “.svn” directories to be available during
+                        compile-time when set to "keep".
+                        By default, these directories are removed.
+                        </para></listitem>
+                </itemizedlist>
+                Following are two examples using svn:
+                <literallayout class='monospaced'>
+     SRC_URI = "svn://svn.oe.handhelds.org/svn;module=vip;proto=http;rev=667"
+     SRC_URI = "svn://svn.oe.handhelds.org/svn/;module=opie;proto=svn+ssh;date=20060126"
+                </literallayout>
+            </para>
+        </section>
+
+        <section id='git-fetcher'>
+            <title>GIT Fetcher (<filename>git://</filename>)</title>
+
+            <para>
+                This fetcher submodule fetches code from the Git
+                source control system.
+                The fetcher works by creating a bare clone of the
+                remote into <filename>GITDIR</filename>, which is
+                usually <filename>DL_DIR/git</filename>.
+                This bare clone is then cloned into the work directory during the
+                unpack stage when a specific tree is checked out.
+                This is done using alternates and by reference to
+                minimize the amount of duplicate data on the disk and
+                make the unpack process fast.
+                The executable used can be set with
+                <filename>FETCHCMD_git</filename>.
+            </para>
+
+            <para>
+                This fetcher supports the following parameters:
+                <itemizedlist>
+                    <listitem><para><emphasis>"protocol":</emphasis>
+                        The protocol used to fetch the files.
+                        The default is "git" when a hostname is set.
+                        If a hostname is not set, the Git protocol is "file".
+                        You can also use "http", "https", "ssh" and "rsync".
+                        </para></listitem>
+                    <listitem><para><emphasis>"nocheckout":</emphasis>
+                        Tells the fetcher to not checkout source code when
+                        unpacking when set to "1".
+                        Set this option for the URL where there is a custom
+                        routine to checkout code.
+                        The default is "0".
+                        </para></listitem>
+                    <listitem><para><emphasis>"rebaseable":</emphasis>
+                        Indicates that the upstream Git repository can be rebased.
+                        You should set this parameter to "1" if
+                        revisions can become detached from branches.
+                        In this case, the source mirror tarball is done per
+                        revision, which has a loss of efficiency.
+                        Rebasing the upstream Git repository could cause the
+                        current revision to disappear from the upstream repository.
+                        This option reminds the fetcher to preserve the local cache
+                        carefully for future use.
+                        The default value for this parameter is "0".
+                        </para></listitem>
+                    <listitem><para><emphasis>"nobranch":</emphasis>
+                        Tells the fetcher to not check the SHA validation
+                        for the branch when set to "1".
+                        The default is "0".
+                        Set this option for the recipe that refers to
+                        the commit that is valid for a tag instead of
+                        the branch.
+                        </para></listitem>
+                    <listitem><para><emphasis>"bareclone":</emphasis>
+                        Tells the fetcher to clone a bare clone into the
+                        destination directory without checking out a working tree.
+                        Only the raw Git metadata is provided.
+                        This parameter implies the "nocheckout" parameter as well.
+                        </para></listitem>
+                    <listitem><para><emphasis>"branch":</emphasis>
+                        The branch(es) of the Git tree to clone.
+                        If unset, this is assumed to be "master".
+                        The number of branch parameters much match the number of
+                        name parameters.
+                        </para></listitem>
+                    <listitem><para><emphasis>"rev":</emphasis>
+                        The revision to use for the checkout.
+                        The default is "master".
+                        </para></listitem>
+                    <listitem><para><emphasis>"tag":</emphasis>
+                        Specifies a tag to use for the checkout.
+                        To correctly resolve tags, BitBake must access the
+                        network.
+                        For that reason, tags are often not used.
+                        As far as Git is concerned, the "tag" parameter behaves
+                        effectively the same as the "revision" parameter.
+                        </para></listitem>
+                    <listitem><para><emphasis>"subpath":</emphasis>
+                        Limits the checkout to a specific subpath of the tree.
+                        By default, the whole tree is checked out.
+                        </para></listitem>
+                    <listitem><para><emphasis>"destsuffix":</emphasis>
+                        The name of the path in which to place the checkout.
+                        By default, the path is <filename>git/</filename>.
+                        </para></listitem>
+                </itemizedlist>
+                Here are some example URLs:
+                <literallayout class='monospaced'>
+     SRC_URI = "git://git.oe.handhelds.org/git/vip.git;tag=version-1"
+     SRC_URI = "git://git.oe.handhelds.org/git/vip.git;protocol=http"
+                </literallayout>
+            </para>
+        </section>
+
+        <section id='other-fetchers'>
+            <title>Other Fetchers</title>
+
+            <para>
+                Fetch submodules also exist for the following:
+                <itemizedlist>
+                    <listitem><para>
+                        Bazaar (<filename>bzr://</filename>)
+                        </para></listitem>
+                    <listitem><para>
+                        Perforce (<filename>p4://</filename>)
+                        </para></listitem>
+                    <listitem><para>
+                        Git Submodules (<filename>gitsm://</filename>)
+                        </para></listitem>
+                    <listitem><para>
+                        Trees using Git Annex (<filename>gitannex://</filename>)
+                        </para></listitem>
+                    <listitem><para>
+                        Secure FTP (<filename>sftp://</filename>)
+                        </para></listitem>
+                    <listitem><para>
+                        Secure Shell (<filename>ssh://</filename>)
+                        </para></listitem>
+                    <listitem><para>
+                        Repo (<filename>repo://</filename>)
+                        </para></listitem>
+                    <listitem><para>
+                        OSC (<filename>osc://</filename>)
+                        </para></listitem>
+                    <listitem><para>
+                        Mercurial (<filename>hg://</filename>)
+                        </para></listitem>
+                </itemizedlist>
+                No documentation currently exists for these lesser used
+                fetcher submodules.
+                However, you might find the code helpful and readable.
+            </para>
+        </section>
+    </section>
+
+    <section id='auto-revisions'>
+        <title>Auto Revisions</title>
+
+        <para>
+            We need to document <filename>AUTOREV</filename> and
+            <filename>SRCREV_FORMAT</filename> here.
+        </para>
+    </section>
+</chapter>

bitbake/doc/bitbake-user-manual/bitbake-user-manual-hello.xml

@@ -0,0 +1,506 @@
+<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
+"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
+
+<appendix id='hello-world-example'>
+    <title>Hello World Example</title>
+
+    <section id='bitbake-hello-world'>
+        <title>BitBake Hello World</title>
+
+        <para>
+            The simplest example commonly used to demonstrate any new
+            programming language or tool is the
+            "<ulink url="http://en.wikipedia.org/wiki/Hello_world_program">Hello World</ulink>"
+            example.
+            This appendix demonstrates, in tutorial form, Hello
+            World within the context of BitBake.
+            The tutorial describes how to create a new project
+            and the applicable metadata files necessary to allow
+            BitBake to build it.
+        </para>
+    </section>
+
+    <section id='example-obtaining-bitbake'>
+        <title>Obtaining BitBake</title>
+
+        <para>
+            See the
+            "<link linkend='obtaining-bitbake'>Obtaining BitBake</link>"
+            section for information on how to obtain BitBake.
+            Once you have the source code on your machine, the BitBake directory
+            appears as follows:
+            <literallayout class='monospaced'>
+     $ ls -al
+     total 100
+     drwxrwxr-x. 9 wmat wmat  4096 Jan 31 13:44 .
+     drwxrwxr-x. 3 wmat wmat  4096 Feb  4 10:45 ..
+     -rw-rw-r--. 1 wmat wmat   365 Nov 26 04:55 AUTHORS
+     drwxrwxr-x. 2 wmat wmat  4096 Nov 26 04:55 bin
+     drwxrwxr-x. 4 wmat wmat  4096 Jan 31 13:44 build
+     -rw-rw-r--. 1 wmat wmat 16501 Nov 26 04:55 ChangeLog
+     drwxrwxr-x. 2 wmat wmat  4096 Nov 26 04:55 classes
+     drwxrwxr-x. 2 wmat wmat  4096 Nov 26 04:55 conf
+     drwxrwxr-x. 3 wmat wmat  4096 Nov 26 04:55 contrib
+     -rw-rw-r--. 1 wmat wmat 17987 Nov 26 04:55 COPYING
+     drwxrwxr-x. 3 wmat wmat  4096 Nov 26 04:55 doc
+     -rw-rw-r--. 1 wmat wmat    69 Nov 26 04:55 .gitignore
+     -rw-rw-r--. 1 wmat wmat   849 Nov 26 04:55 HEADER
+     drwxrwxr-x. 5 wmat wmat  4096 Jan 31 13:44 lib
+     -rw-rw-r--. 1 wmat wmat   195 Nov 26 04:55 MANIFEST.in
+     -rwxrwxr-x. 1 wmat wmat  3195 Jan 31 11:57 setup.py
+     -rw-rw-r--. 1 wmat wmat  2887 Nov 26 04:55 TODO
+            </literallayout>
+        </para>
+
+        <para>
+            At this point, you should have BitBake cloned to
+            a directory that matches the previous listing except for
+            dates and user names.
+        </para>
+    </section>
+
+    <section id='setting-up-the-bitbake-environment'>
+        <title>Setting Up the BitBake Environment</title>
+
+        <para>
+            First, you need to be sure that you can run BitBake.
+            Set your working directory to where your local BitBake
+            files are and run the following command:
+            <literallayout class='monospaced'>
+     $ ./bin/bitbake --version
+     BitBake Build Tool Core version 1.23.0, bitbake version 1.23.0
+            </literallayout>
+            The console output tells you what version you are running.
+        </para>
+
+        <para>
+            The recommended method to run BitBake is from a directory of your
+            choice.
+            To be able to run BitBake from any directory, you need to add the
+            executable binary to your binary to your shell's environment
+            <filename>PATH</filename> variable.
+            First, look at your current <filename>PATH</filename> variable
+            by entering the following:
+            <literallayout class='monospaced'>
+     $ echo $PATH
+            </literallayout>
+            Next, add the directory location for the BitBake binary to the
+            <filename>PATH</filename>.
+            Here is an example that adds the
+            <filename>/home/scott-lenovo/bitbake/bin</filename> directory
+            to the front of the <filename>PATH</filename> variable:
+            <literallayout class='monospaced'>
+     $ export PATH=/home/scott-lenovo/bitbake/bin:$PATH
+            </literallayout>
+            You should now be able to enter the <filename>bitbake</filename>
+            command from the command line while working from any directory.
+        </para>
+    </section>
+
+    <section id='the-hello-world-example'>
+        <title>The Hello World Example</title>
+
+        <para>
+            The overall goal of this exercise is to build a
+            complete "Hello World" example utilizing task and layer
+            concepts.
+            Because this is how modern projects such as OpenEmbedded and
+            the Yocto Project utilize BitBake, the example
+            provides an excellent starting point for understanding
+            BitBake.
+        </para>
+
+        <para>
+            To help you understand how to use BitBake to build targets,
+            the example starts with nothing but the <filename>bitbake</filename>
+            command, which causes BitBake to fail and report problems.
+            The example progresses by adding pieces to the build to
+            eventually conclude with a working, minimal "Hello World"
+            example.
+        </para>
+
+        <para>
+            While every attempt is made to explain what is happening during
+            the example, the descriptions cannot cover everything.
+            You can find further information throughout this manual.
+            Also, you can actively participate in the
+            <ulink url='http://lists.openembedded.org/mailman/listinfo/bitbake-devel'></ulink>
+            discussion mailing list about the BitBake build tool.
+        </para>
+
+        <note>
+            This example was inspired by and drew heavily from these sources:
+            <itemizedlist>
+                <listitem><para>
+                    <ulink url="http://www.mail-archive.com/yocto@yoctoproject.org/msg09379.html">Mailing List post - The BitBake equivalent of "Hello, World!"</ulink>
+                    </para></listitem>
+                <listitem><para>
+                    <ulink url="http://hambedded.org/blog/2012/11/24/from-bitbake-hello-world-to-an-image/">Hambedded Linux blog post - From Bitbake Hello World to an Image</ulink>
+                    </para></listitem>
+            </itemizedlist>
+        </note>
+
+        <para>
+            As stated earlier, the goal of this example
+            is to eventually compile "Hello World".
+            However, it is unknown what BitBake needs and what you have
+            to provide in order to achieve that goal.
+            Recall that BitBake utilizes three types of metadata files:
+            <link linkend='configuration-files'>Configuration Files</link>,
+            <link linkend='classes'>Classes</link>, and
+            <link linkend='recipes'>Recipes</link>.
+            But where do they go?
+            How does BitBake find them?
+            BitBake's error messaging helps you answer these types of questions
+            and helps you better understand exactly what is going on.
+        </para>
+
+        <para>
+            Following is the complete "Hello World" example.
+        </para>
+
+        <orderedlist>
+            <listitem><para><emphasis>Create a Project Directory:</emphasis>
+                First, set up a directory for the "Hello World" project.
+                Here is how you can do so in your home directory:
+                <literallayout class='monospaced'>
+     $ mkdir ~/hello
+     $ cd ~/hello
+                </literallayout>
+                This is the directory that BitBake will use to do all of
+                its work.
+                You can use this directory to keep all the metafiles needed
+                by BitBake.
+                Having a project directory is a good way to isolate your
+                project.
+                </para></listitem>
+            <listitem><para><emphasis>Run Bitbake:</emphasis>
+                At this point, you have nothing but a project directory.
+                Run the <filename>bitbake</filename> command and see what
+                it does:
+                <literallayout class='monospaced'>
+     $ bitbake
+     The BBPATH variable is not set and bitbake did not
+     find a conf/bblayers.conf file in the expected location.
+     Maybe you accidentally invoked bitbake from the wrong directory?
+     DEBUG: Removed the following variables from the environment:
+     GNOME_DESKTOP_SESSION_ID, XDG_CURRENT_DESKTOP,
+     GNOME_KEYRING_CONTROL, DISPLAY, SSH_AGENT_PID, LANG, no_proxy,
+     XDG_SESSION_PATH, XAUTHORITY, SESSION_MANAGER, SHLVL,
+     MANDATORY_PATH, COMPIZ_CONFIG_PROFILE, WINDOWID, EDITOR,
+     GPG_AGENT_INFO, SSH_AUTH_SOCK, GDMSESSION, GNOME_KEYRING_PID,
+     XDG_SEAT_PATH, XDG_CONFIG_DIRS, LESSOPEN, DBUS_SESSION_BUS_ADDRESS,
+     _, XDG_SESSION_COOKIE, DESKTOP_SESSION, LESSCLOSE, DEFAULTS_PATH,
+     UBUNTU_MENUPROXY, OLDPWD, XDG_DATA_DIRS, COLORTERM, LS_COLORS
+                </literallayout>
+                The majority of this output is specific to environment variables
+                that are not directly relevant to BitBake.
+                However, the very first message regarding the
+                <filename>BBPATH</filename> variable and the
+                <filename>conf/bblayers.conf</filename> file
+                is relevant.</para>
+                <para>
+                When you run BitBake, it begins looking for metadata files.
+                The
+                <link linkend='var-BBPATH'><filename>BBPATH</filename></link>
+                variable is what tells BitBake where to look for those files.
+                <filename>BBPATH</filename> is not set and you need to set it.
+                Without <filename>BBPATH</filename>, Bitbake cannot
+                find any configuration files (<filename>.conf</filename>)
+                or recipe files (<filename>.bb</filename>) at all.
+                BitBake also cannot find the <filename>bitbake.conf</filename>
+                file.
+                </para></listitem>
+            <listitem><para><emphasis>Setting <filename>BBPATH</filename>:</emphasis>
+                For this example, you can set <filename>BBPATH</filename>
+                in the same manner that you set <filename>PATH</filename>
+                earlier in the appendix.
+                You should realize, though, that it is much more flexible to set the
+                <filename>BBPATH</filename> variable up in a configuration
+                file for each project.</para>
+                <para>From your shell, enter the following commands to set and
+                export the <filename>BBPATH</filename> variable:
+                <literallayout class='monospaced'>
+     $ BBPATH="&lt;projectdirectory&gt;"
+     $ export BBPATH
+                </literallayout>
+                Use your actual project directory in the command.
+                BitBake uses that directory to find the metadata it needs for
+                your project.
+                <note>
+                    When specifying your project directory, do not use the
+                    tilde ("~") character as BitBake does not expand that character
+                    as the shell would.
+                </note>
+                </para></listitem>
+            <listitem><para><emphasis>Run Bitbake:</emphasis>
+                Now that you have <filename>BBPATH</filename> defined, run
+                the <filename>bitbake</filename> command again:
+                <literallayout class='monospaced'>
+     $ bitbake
+     ERROR: Traceback (most recent call last):
+       File "/home/scott-lenovo/bitbake/lib/bb/cookerdata.py", line 163, in wrapped
+         return func(fn, *args)
+       File "/home/scott-lenovo/bitbake/lib/bb/cookerdata.py", line 173, in parse_config_file
+         return bb.parse.handle(fn, data, include)
+       File "/home/scott-lenovo/bitbake/lib/bb/parse/__init__.py", line 99, in handle
+         return h['handle'](fn, data, include)
+       File "/home/scott-lenovo/bitbake/lib/bb/parse/parse_py/ConfHandler.py", line 120, in handle
+         abs_fn = resolve_file(fn, data)
+       File "/home/scott-lenovo/bitbake/lib/bb/parse/__init__.py", line 117, in resolve_file
+         raise IOError("file %s not found in %s" % (fn, bbpath))
+     IOError: file conf/bitbake.conf not found in /home/scott-lenovo/hello
+
+     ERROR: Unable to parse conf/bitbake.conf: file conf/bitbake.conf not found in /home/scott-lenovo/hello
+                </literallayout>
+                This sample output shows that BitBake could not find the
+                <filename>conf/bitbake.conf</filename> file in the project
+                directory.
+                This file is the first thing BitBake must find in order
+                to build a target.
+                And, since the project directory for this example is
+                empty, you need to provide a <filename>conf/bitbake.conf</filename>
+                file.
+                </para></listitem>
+            <listitem><para><emphasis>Creating <filename>conf/bitbake.conf</filename>:</emphasis>
+                The <filename>conf/bitbake.conf</filename> includes a number of
+                configuration variables BitBake uses for metadata and recipe
+                files.
+                For this example, you need to create the file in your project directory
+                and define some key BitBake variables.
+                For more information on the <filename>bitbake.conf</filename>,
+                see
+                <ulink url='http://hambedded.org/blog/2012/11/24/from-bitbake-hello-world-to-an-image/#an-overview-of-bitbakeconf'></ulink>
+                </para>
+                <para>Use the following commands to create the <filename>conf</filename>
+                directory in the project directory:
+                <literallayout class='monospaced'>
+     $ mkdir conf
+                </literallayout>
+                From within the <filename>conf</filename> directory, use
+                some editor to create the <filename>bitbake.conf</filename>
+                so that it contains the following:
+                <literallayout class='monospaced'>
+     TMPDIR  = "${<link linkend='var-TOPDIR'>TOPDIR</link>}/tmp"
+     <link linkend='var-CACHE'>CACHE</link>   = "${TMPDIR}/cache"
+     <link linkend='var-STAMP'>STAMP</link>   = "${TMPDIR}/stamps"
+     <link linkend='var-T'>T</link>       = "${TMPDIR}/work"
+     <link linkend='var-B'>B</link>       = "${TMPDIR}"
+                </literallayout>
+                The <filename>TMPDIR</filename> variable establishes a directory
+                that BitBake uses for build output and intermediate files (other
+                than the cached information used by the
+                <link linkend='setscene'>Setscene</link> process.
+                Here, the <filename>TMPDIR</filename> directory is set to
+                <filename>hello/tmp</filename>.
+                <note><title>Tip</title>
+                    You can always safely delete the <filename>tmp</filename>
+                    directory in order to rebuild a BitBake target.
+                    The build process creates the directory for you
+                    when you run BitBake.
+                </note></para>
+                <para>For information about each of the other variables defined in this
+                example, click on the links to take you to the definitions in
+                the glossary.
+                </para></listitem>
+            <listitem><para><emphasis>Run Bitbake:</emphasis>
+                After making sure that the <filename>conf/bitbake.conf</filename>
+                file exists, you can run the <filename>bitbake</filename>
+                command again:
+                <literallayout class='monospaced'>
+$ bitbake
+ERROR: Traceback (most recent call last):
+  File "/home/scott-lenovo/bitbake/lib/bb/cookerdata.py", line 163, in wrapped
+    return func(fn, *args)
+  File "/home/scott-lenovo/bitbake/lib/bb/cookerdata.py", line 177, in _inherit
+    bb.parse.BBHandler.inherit(bbclass, "configuration INHERITs", 0, data)
+  File "/home/scott-lenovo/bitbake/lib/bb/parse/parse_py/BBHandler.py", line 92, in inherit
+    include(fn, file, lineno, d, "inherit")
+  File "/home/scott-lenovo/bitbake/lib/bb/parse/parse_py/ConfHandler.py", line 100, in include
+    raise ParseError("Could not %(error_out)s file %(fn)s" % vars(), oldfn, lineno)
+ParseError: ParseError in configuration INHERITs: Could not inherit file classes/base.bbclass
+
+ERROR: Unable to parse base: ParseError in configuration INHERITs: Could not inherit file classes/base.bbclass
+                </literallayout>
+                In the sample output, BitBake could not find the
+                <filename>classes/base.bbclass</filename> file.
+                You need to create that file next.
+                </para></listitem>
+            <listitem><para><emphasis>Creating <filename>classes/base.bbclass</filename>:</emphasis>
+                BitBake uses class files to provide common code and functionality.
+                The minimally required class for BitBake is the
+                <filename>classes/base.bbclass</filename> file.
+                The <filename>base</filename> class is implicitly inherited by
+                every recipe.
+                BitBake looks for the class in the <filename>classes</filename>
+                directory of the project (i.e <filename>hello/classes</filename>
+                in this example).
+                </para>
+                <para>Create the <filename>classes</filename> directory as follows:
+                <literallayout class='monospaced'>
+     $ cd $HOME/hello
+     $ mkdir classes
+                </literallayout>
+                Move to the <filename>classes</filename> directory and then
+                create the <filename>base.bbclass</filename> file by inserting
+                this single line:
+                <literallayout class='monospaced'>
+     addtask build
+                </literallayout>
+                The minimal task that BitBake runs is the
+                <filename>do_build</filename> task.
+                This is all the example needs in order to build the project.
+                Of course, the <filename>base.bbclass</filename> can have much
+                more depending on which build environments BitBake is
+                supporting.
+                For more information on the <filename>base.bbclass</filename> file,
+                you can look at
+                <ulink url='http://hambedded.org/blog/2012/11/24/from-bitbake-hello-world-to-an-image/#tasks'></ulink>.
+                </para></listitem>
+            <listitem><para><emphasis>Run Bitbake:</emphasis>
+                After making sure that the <filename>classes/base.bbclass</filename>
+                file exists, you can run the <filename>bitbake</filename>
+                command again:
+                <literallayout class='monospaced'>
+     $ bitbake
+     Nothing to do.  Use 'bitbake world' to build everything, or run 'bitbake --help' for usage information.
+                </literallayout>
+                BitBake is finally reporting no errors.
+                However, you can see that it really does not have anything
+                to do.
+                You need to create a recipe that gives BitBake something to do.
+                </para></listitem>
+            <listitem><para><emphasis>Creating a Layer:</emphasis>
+                While it is not really necessary for such a small example,
+                it is good practice to create a layer in which to keep your
+                code separate from the general metadata used by BitBake.
+                Thus, this example creates and uses a layer called "mylayer".
+                <note>
+                    You can find additional information on adding a layer at
+                    <ulink url='http://hambedded.org/blog/2012/11/24/from-bitbake-hello-world-to-an-image/#adding-an-example-layer'></ulink>.
+                </note>
+                </para>
+                <para>Minimally, you need a recipe file and a layer configuration
+                file in your layer.
+                The configuration file needs to be in the <filename>conf</filename>
+                directory inside the layer.
+                Use these commands to set up the layer and the <filename>conf</filename>
+                directory:
+                <literallayout class='monospaced'>
+     $ cd $HOME
+     $ mkdir mylayer
+     $ cd mylayer
+     $ mkdir conf
+                </literallayout>
+                Move to the <filename>conf</filename> directory and create a
+                <filename>layer.conf</filename> file that has the following:
+                <literallayout class='monospaced'>
+     BBPATH .= ":${<link linkend='var-LAYERDIR'>LAYERDIR</link>}"
+
+     <link linkend='var-BBFILES'>BBFILES</link> += "${LAYERDIR}/*.bb"
+
+     <link linkend='var-BBFILE_COLLECTIONS'>BBFILE_COLLECTIONS</link> += "mylayer"
+     <link linkend='var-BBFILE_PATTERN'>BBFILE_PATTERN_mylayer</link> := "^${LAYERDIR}/"
+                </literallayout>
+                For information on these variables, click the links
+                to go to the definitions in the glossary.</para>
+                <para>You need to create the recipe file next.
+                Inside your layer at the top-level, use an editor and create
+                a recipe file named <filename>printhello.bb</filename> that
+                has the following:
+                <literallayout class='monospaced'>
+     <link linkend='var-DESCRIPTION'>DESCRIPTION</link> = "Prints Hello World"
+     <link linkend='var-PN'>PN</link> = 'printhello'
+     <link linkend='var-PV'>PV</link> = '1'
+
+     python do_build() {
+        bb.plain("********************");
+        bb.plain("*                  *");
+        bb.plain("*  Hello, World!   *");
+        bb.plain("*                  *");
+        bb.plain("********************");
+     }
+                </literallayout>
+                The recipe file simply provides a description of the
+                recipe, the name, version, and the <filename>do_build</filename>
+                task, which prints out "Hello World" to the console.
+                For more information on these variables, follow the links
+                to the glossary.
+                </para></listitem>
+            <listitem><para><emphasis>Run Bitbake With a Target:</emphasis>
+                Now that a BitBake target exists, run the command and provide
+                that target:
+                <literallayout class='monospaced'>
+     $ cd $HOME/hello
+     $ bitbake printhello
+     ERROR: no recipe files to build, check your BBPATH and BBFILES?
+
+     Summary: There was 1 ERROR message shown, returning a non-zero exit code.
+                </literallayout>
+                We have created the layer with the recipe and the layer
+                configuration file but it still seems that BitBake cannot
+                find the recipe.
+                BitBake needs a <filename>conf/bblayers.conf</filename> that
+                lists the layers for the project.
+                Without this file, BitBake cannot find the recipe.
+                </para></listitem>
+            <listitem><para><emphasis>Creating <filename>conf/bblayers.conf</filename>:</emphasis>
+                BitBake uses the <filename>conf/bblayers.conf</filename> file
+                to locate layers needed for the project.
+                This file must reside in the <filename>conf</filename> directory
+                of the project (i.e. <filename>hello/conf</filename> for this
+                example).</para>
+                <para>Set your working directory to the <filename>hello/conf</filename>
+                directory and then create the <filename>bblayers.conf</filename>
+                file so that it contains the following:
+                <literallayout class='monospaced'>
+     BBLAYERS ?= " \
+       /home/&lt;you&gt;/mylayer \
+       "
+                </literallayout>
+                You need to provide your own information for
+                <filename>you</filename> in the file.
+                </para></listitem>
+            <listitem><para><emphasis>Run Bitbake With a Target:</emphasis>
+                Now that you have supplied the <filename>bblayers.conf</filename>
+                file, run the <filename>bitbake</filename> command and provide
+                the target:
+                <literallayout class='monospaced'>
+     $ bitbake printhello
+     Parsing recipes: 100% |##################################################################################|
+     Time: 00:00:00
+     Parsing of 1 .bb files complete (0 cached, 1 parsed). 1 targets, 0 skipped, 0 masked, 0 errors.
+     NOTE: Resolving any missing task queue dependencies
+     NOTE: Preparing runqueue
+     NOTE: Executing RunQueue Tasks
+     ********************
+     *                  *
+     *  Hello, World!   *
+     *                  *
+     ********************
+     NOTE: Tasks Summary: Attempted 1 tasks of which 0 didn't need to be rerun and all succeeded.
+                </literallayout>
+                BitBake finds the <filename>printhello</filename> recipe and
+                successfully runs the task.
+                <note>
+                    After the first execution, re-running
+                    <filename>bitbake printhello</filename> again will not
+                    result in a BitBake run that prints the same console
+                    output.
+                    The reason for this is that the first time the
+                    <filename>printhello.bb</filename> recipe's
+                    <filename>do_build</filename> task executes
+                    successfully, BitBake writes a stamp file for the task.
+                    Thus, the next time you attempt to run the task
+                    using that same <filename>bitbake</filename> command,
+                    BitBake notices the stamp and therefore determines
+                    that the task does not need to be re-run.
+                    If you delete the <filename>tmp</filename> directory
+                    or run <filename>bitbake -c clean printhello</filename>
+                    and then re-run the build, the "Hello, World!" message will
+                    be printed again.
+                </note>
+                </para></listitem>
+        </orderedlist>
+    </section>
+</appendix>

bitbake/doc/bitbake-user-manual/bitbake-user-manual-intro.xml

@@ -0,0 +1,644 @@
+<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
+    "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
+
+<chapter id="bitbake-user-manual-intro">
+    <title>Overview</title>
+
+    <para>
+        Welcome to the BitBake User Manual.
+        This manual provides information on the BitBake tool.
+        The information attempts to be as independent as possible regarding
+        systems that use BitBake, such as the Yocto Project and
+        OpenEmbedded.
+        In some cases, scenarios or examples that within the context of
+        a build system are used in the manual to help with understanding.
+        For these cases, the manual clearly states the context.
+    </para>
+
+    <section id="intro">
+        <title>Introduction</title>
+
+        <para>
+            Fundamentally, BitBake is a generic task execution
+            engine that allows shell and Python tasks to be run
+            efficiently and in parallel while working within
+            complex inter-task dependency constraints.
+            One of BitBake's main users, OpenEmbedded, takes this core
+            and builds embedded Linux software stacks using
+            a task-oriented approach.
+        </para>
+
+        <para>
+            Conceptually, BitBake is similar to GNU Make in
+            some regards but has significant differences:
+            <itemizedlist>
+                <listitem><para>
+                    BitBake executes tasks according to provided
+                    metadata that builds up the tasks.
+                    Metadata is stored in recipe (<filename>.bb</filename>),
+                    configuration (<filename>.conf</filename>), and class
+                    (<filename>.bbclass</filename>) files and provides
+                    BitBake with instructions on what tasks to run and
+                    the dependencies between those tasks.
+                    </para></listitem>
+                <listitem><para>
+                    BitBake includes a fetcher library for obtaining source
+                    code from various places such as source control
+                    systems or websites.
+                    </para></listitem>
+                <listitem><para>
+                    The instructions for each unit to be built (e.g. a piece
+                    of software) are known as recipe files and
+                    contain all the information about the unit
+                    (dependencies, source file locations, checksums, description
+                    and so on).
+                    </para></listitem>
+                <listitem><para>
+                    BitBake includes a client/server abstraction and can
+                    be used from a command line or used as a service over XMLRPC and
+                    has several different user interfaces.
+                    </para></listitem>
+            </itemizedlist>
+        </para>
+    </section>
+
+    <section id="history-and-goals">
+        <title>History and Goals</title>
+
+        <para>
+            BitBake was originally a part of the OpenEmbedded project.
+            It was inspired by the Portage package management system
+            used by the Gentoo Linux distribution.
+            On December 7, 2004, OpenEmbedded project team member,
+            Chris Larson split the project into two distinct pieces:
+            <itemizedlist>
+                <listitem><para>BitBake, a generic task executor</para></listitem>
+                <listitem><para>OpenEmbedded, a metadata set utilized by
+                    BitBake</para></listitem>
+            </itemizedlist>
+            Today, BitBake is the primary basis of the
+            <ulink url="http://www.openembedded.org/">OpenEmbedded</ulink>
+            project, which is being used to build and maintain Linux
+            distributions such as the Angstrom Distribution and which is used
+            as the build tool for Linux projects such as the Yocto Project.
+        </para>
+
+        <para>
+            Prior to BitBake, no other build tool adequately met the needs of
+            an aspiring embedded Linux distribution.
+            All of the build systems used by traditional desktop Linux
+            distributions lacked important functionality, and none of the
+            ad-hoc Buildroot-based systems, prevalent in the
+            embedded space, were scalable or maintainable.
+        </para>
+
+        <para>
+            Some important original goals for BitBake were:
+            <itemizedlist>
+                <listitem><para>
+                    Handle cross-compilation.
+                    </para></listitem>
+                <listitem><para>
+                    Handle inter-package dependencies (build time on
+                    target architecture, build time on native
+                    architecture, and runtime).
+                    </para></listitem>
+                <listitem><para>
+                    Support running any number of tasks within a given
+                    package, including, but not limited to, fetching
+                    upstream sources, unpacking them, patching them,
+                    configuring them, and so forth.
+                    </para></listitem>
+                <listitem><para>
+                    Be Linux distribution agnostic for both build and
+                    target systems.
+                    </para></listitem>
+                <listitem><para>
+                    Be architecture agnostic.
+                    </para></listitem>
+                <listitem><para>
+                    Support multiple build and target operating systems
+                    (e.g. Cygwin, the BSDs, and so forth).
+                    </para></listitem>
+                <listitem><para>
+                    Be self contained, rather than tightly
+                    integrated into the build machine's root
+                    filesystem.
+                    </para></listitem>
+                <listitem><para>
+                    Handle conditional metadata on the target architecture,
+                    operating system, distribution, and machine.
+                    </para></listitem>
+                <listitem><para>
+                    Be easy to use the tools to supply local metadata and packages
+                    against which to operate.
+                    </para></listitem>
+                <listitem><para>
+                    Be easy to use BitBake to collaborate between multiple
+                    projects for their builds.
+                    </para></listitem>
+                <listitem><para>
+                    Provide an inheritance mechanism that share
+                    common metadata between many packages.
+                    </para></listitem>
+            </itemizedlist>
+            Over time it became apparent that some further requirements
+            were necessary:
+            <itemizedlist>
+                <listitem><para>
+                    Handle variants of a base recipe (e.g. native, sdk,
+                    and multilib).
+                    </para></listitem>
+                <listitem><para>
+                    Split metadata into layers and allow layers
+                    to override each other.
+                    </para></listitem>
+                <listitem><para>
+                    Allow representation of a given set of input variables
+                    to a task as a checksum.
+                    Based on that checksum, allow acceleration of builds
+                    with prebuilt components.
+                    </para></listitem>
+            </itemizedlist>
+            BitBake satisfies all the original requirements and many more
+            with extensions being made to the basic functionality to
+            reflect the additional requirements.
+            Flexibility and power have always been the priorities.
+            BitBake is highly extensible and supports embedded Python code and
+            execution of any arbitrary tasks.
+        </para>
+    </section>
+
+    <section id="Concepts">
+        <title>Concepts</title>
+
+        <para>
+            BitBake is a program written in the Python language.
+            At the highest level, BitBake interprets metadata, decides
+            what tasks are required to run, and executes those tasks.
+            Similar to GNU Make, BitBake controls how software is
+            built.
+            GNU Make achieves its control through "makefiles".
+            BitBake uses "recipes".
+        </para>
+
+        <para>
+            BitBake extends the capabilities of a simple
+            tool like GNU Make by allowing for much more complex tasks
+            to be completed, such as assembling entire embedded Linux
+            distributions.
+        </para>
+
+        <para>
+            The remainder of this section introduces several concepts
+            that should be understood in order to better leverage
+            the power of BitBake.
+        </para>
+
+        <section id='recipes'>
+            <title>Recipes</title>
+
+            <para>
+                BitBake Recipes, which are denoted by the file extension
+                <filename>.bb</filename>, are the most basic metadata files.
+                These recipe files provide BitBake with the following:
+                <itemizedlist>
+                    <listitem><para>Descriptive information about the package</para></listitem>
+                    <listitem><para>The version of the recipe</para></listitem>
+                    <listitem><para>Existing Dependencies</para></listitem>
+                    <listitem><para>Where the source code resides</para></listitem>
+                    <listitem><para>Whether the source code requires any patches</para></listitem>
+                    <listitem><para>How to compile the source code</para></listitem>
+                    <listitem><para>Where on the target machine to install the
+                        package being compiled</para></listitem>
+                </itemizedlist>
+            </para>
+
+            <para>
+                Within the context of BitBake, or any project utilizing BitBake
+                as its build system, files with the <filename>.bb</filename>
+                extension are referred to as recipes.
+                <note>
+                    The term "package" is also commonly used to describe recipes.
+                    However, since the same word is used to describe packaged
+                    output from a project, it is best to maintain a single
+                    descriptive term, "recipes".
+                </note>
+            </para>
+        </section>
+
+        <section id='configuration-files'>
+            <title>Configuration Files</title>
+
+            <para>
+                Configuration files, which are denoted by the
+                <filename>.conf</filename> extension, define
+                various configuration variables that govern the project's build
+                process.
+                These files fall into several areas that define
+                machine configuration options, distribution configuration
+                options, compiler tuning options, general common
+                configuration options, and user configuration options.
+                The main configuration file is the sample
+                <filename>bitbake.conf</filename> file, which is
+                located within the BitBake source tree
+                <filename>conf</filename> directory.
+            </para>
+        </section>
+
+        <section id='classes'>
+            <title>Classes</title>
+
+            <para>
+                Class files, which are denoted by the
+                <filename>.bbclass</filename> extension, contain
+                information that is useful to share between metadata files.
+                The BitBake source tree currently comes with one class metadata file
+                called <filename>base.bbclass</filename>.
+                You can find this file in the
+                <filename>classes</filename> directory.
+                The <filename>base.bbclass</filename> is special since it
+                is always included automatically for all recipes
+                and classes.
+                This class contains definitions for standard basic tasks such
+                as fetching, unpacking, configuring (empty by default),
+                compiling (runs any Makefile present), installing (empty by
+                default) and packaging (empty by default).
+                These tasks are often overridden or extended by other classes
+                added during the project development process.
+            </para>
+        </section>
+
+        <section id='layers'>
+            <title>Layers</title>
+
+            <para>
+                Layers allow you to isolate different types of
+                customizations from each other.
+                While you might find it tempting to keep everything in one layer
+                when working on a single project, the more modular you organize
+                your metadata, the easier it is to cope with future changes.
+            </para>
+
+            <para>
+                To illustrate how you can use layers to keep things modular,
+                consider customizations you might make to support a specific target machine.
+                These types of customizations typically reside in a special layer,
+                rather than a general layer, called a Board Specific Package (BSP) Layer.
+                Furthermore, the machine customizations should be isolated from
+                recipes and metadata that support a new GUI environment, for
+                example.
+                This situation gives you a couple of layers: one for the machine
+                configurations and one for the GUI environment.
+                It is important to understand, however, that the BSP layer can still
+                make machine-specific additions to recipes within
+                the GUI environment layer without polluting the GUI layer itself
+                with those machine-specific changes.
+                You can accomplish this through a recipe that is a BitBake append
+                (<filename>.bbappend</filename>) file.
+            </para>
+        </section>
+
+        <section id='append-bbappend-files'>
+            <title>Append Files</title>
+
+            <para>
+                Append files, which are files that have the
+                <filename>.bbappend</filename> file extension, add or
+                extend build information to an existing
+                recipe file.
+            </para>
+
+            <para>
+                BitBake expects every append file to have a corresponding recipe file.
+                Furthermore, the append file and corresponding recipe file
+                must use the same root filename.
+                The filenames can differ only in the file type suffix used
+                (e.g. <filename>formfactor_0.0.bb</filename> and
+                <filename>formfactor_0.0.bbappend</filename>).
+            </para>
+
+            <para>
+                Information in append files overrides the information in the
+                similarly-named recipe file.
+            </para>
+
+            <para>
+                When you name an append file, you can use the
+                wildcard character (%) to allow for matching recipe names.
+                For example, suppose you have an append file named
+                as follows:
+                <literallayout class='monospaced'>
+     busybox_1.21.%.bbappend
+                </literallayout>
+                That append file would match any <filename>busybox_1.21.x.bb</filename>
+                version of the recipe.
+                So, the append file would match the following recipe names:
+                <literallayout class='monospaced'>
+     busybox_1.21.1.bb
+     busybox_1.21.2.bb
+     busybox_1.21.3.bb
+                </literallayout>
+                If the <filename>busybox</filename> recipe was updated to
+                <filename>busybox_1.3.0.bb</filename>, the append name would not
+                match.
+                However, if you named the append file
+                <filename>busybox_1.%.bbappend</filename>, then you would have a match.
+            </para>
+        </section>
+    </section>
+
+    <section id='obtaining-bitbake'>
+        <title>Obtaining BitBake</title>
+
+        <para>
+            You can obtain BitBake several different ways:
+            <itemizedlist>
+                <listitem><para><emphasis>Cloning BitBake:</emphasis>
+                    Using Git to clone the BitBake source code repository
+                    is the recommended method for obtaining BitBake.
+                    Cloning the repository makes it easy to get bug fixes
+                    and have access to stable branches and the master
+                    branch.
+                    Once you have cloned BitBake, you should use
+                    the latest stable
+                    branch for development since the master branch is for
+                    BitBake development and might contain less stable changes.
+                    </para>
+                    <para>You usually need a version of BitBake
+                    that matches the metadata you are using.
+                    The metadata is generally backwards compatible but
+                    not forward compatible.</para>
+                    <para>Here is an example that clones the BitBake repository:
+                    <literallayout class='monospaced'>
+     $ git clone git://git.openembedded.org/bitbake
+                    </literallayout>
+                    This command clones the BitBake Git repository into a
+                    directory called <filename>bitbake</filename>.
+                    Alternatively, you can
+                    designate a directory after the
+                    <filename>git clone</filename> command
+                    if you want to call the new directory something
+                    other than <filename>bitbake</filename>.
+                    Here is an example that names the directory
+                    <filename>bbdev</filename>:
+                    <literallayout class='monospaced'>
+     $ git clone git://git.openembedded.org/bitbake bbdev
+                    </literallayout></para></listitem>
+                <listitem><para><emphasis>Installation using your Distribution
+                    Package Management System:</emphasis>
+                    This method is not
+                    recommended because the BitBake version that is
+                    provided by your distribution, in most cases,
+                    is several
+                    releases behind a snapshot of the BitBake repository.
+                    </para></listitem>
+                <listitem><para><emphasis>Taking a snapshot of BitBake:</emphasis>
+                    Downloading a snapshot of BitBake from the
+                    source code repository gives you access to a known
+                    branch or release of BitBake.
+                    <note>
+                         Cloning the Git repository, as described earlier,
+                         is the preferred method for getting BitBake.
+                         Cloning the repository makes it easier to update as
+                         patches are added to the stable branches.
+                    </note></para>
+                    <para>The following example downloads a snapshot of
+                    BitBake version 1.17.0:
+                    <literallayout class='monospaced'>
+     $ wget http://git.openembedded.org/bitbake/snapshot/bitbake-1.17.0.tar.gz
+     $ tar zxpvf bitbake-1.17.0.tar.gz
+                    </literallayout>
+                    After extraction of the tarball using the tar utility,
+                    you have a directory entitled
+                    <filename>bitbake-1.17.0</filename>.
+                    </para></listitem>
+            </itemizedlist>
+        </para>
+    </section>
+
+    <section id="bitbake-user-manual-command">
+        <title>The BitBake Command</title>
+
+        <para>
+            The <filename>bitbake</filename> command is the primary interface
+            to the BitBake tool.
+            This section presents the BitBake command syntax and provides
+            several execution examples.
+        </para>
+
+        <section id='usage-and-syntax'>
+            <title>Usage and syntax</title>
+
+            <para>
+                Following is the usage and syntax for BitBake:
+                <literallayout class='monospaced'>
+     $ bitbake -h
+     Usage: bitbake [options] [recipename/target ...]
+
+         Executes the specified task (default is 'build') for a given set of target recipes (.bb files).
+         It is assumed there is a conf/bblayers.conf available in cwd or in BBPATH which
+         will provide the layer, BBFILES and other configuration information.
+
+     Options:
+       --version             show program's version number and exit
+       -h, --help            show this help message and exit
+       -b BUILDFILE, --buildfile=BUILDFILE
+                             Execute tasks from a specific .bb recipe directly.
+                             WARNING: Does not handle any dependencies from other
+                             recipes.
+       -k, --continue        Continue as much as possible after an error. While the
+                             target that failed and anything depending on it cannot
+                             be built, as much as possible will be built before
+                             stopping.
+       -a, --tryaltconfigs   Continue with builds by trying to use alternative
+                             providers where possible.
+       -f, --force           Force the specified targets/task to run (invalidating
+                             any existing stamp file).
+       -c CMD, --cmd=CMD     Specify the task to execute. The exact options
+                             available depend on the metadata. Some examples might
+                             be 'compile' or 'populate_sysroot' or 'listtasks' may
+                             give a list of the tasks available.
+       -C INVALIDATE_STAMP, --clear-stamp=INVALIDATE_STAMP
+                             Invalidate the stamp for the specified task such as
+                             'compile' and then run the default task for the
+                             specified target(s).
+       -r PREFILE, --read=PREFILE
+                             Read the specified file before bitbake.conf.
+       -R POSTFILE, --postread=POSTFILE
+                             Read the specified file after bitbake.conf.
+       -v, --verbose         Output more log message data to the terminal.
+       -D, --debug           Increase the debug level. You can specify this more
+                             than once.
+       -n, --dry-run         Don't execute, just go through the motions.
+       -S DUMP_SIGNATURES, --dump-signatures=DUMP_SIGNATURES
+                             Dump out the signature construction information, with
+                             no task execution. Parameters are passed to the
+                             signature handling code, use 'none' if no specific
+                             handler is required.
+       -p, --parse-only      Quit after parsing the BB recipes.
+       -s, --show-versions   Show current and preferred versions of all recipes.
+       -e, --environment     Show the global or per-package environment complete
+                             with information about where variables were
+                             set/changed.
+       -g, --graphviz        Save dependency tree information for the specified
+                             targets in the dot syntax.
+       -I EXTRA_ASSUME_PROVIDED, --ignore-deps=EXTRA_ASSUME_PROVIDED
+                             Assume these dependencies don't exist and are already
+                             provided (equivalent to ASSUME_PROVIDED). Useful to
+                             make dependency graphs more appealing
+       -l DEBUG_DOMAINS, --log-domains=DEBUG_DOMAINS
+                             Show debug logging for the specified logging domains
+       -P, --profile         Profile the command and save reports.
+       -u UI, --ui=UI        The user interface to use (e.g. knotty, hob, depexp).
+       -t SERVERTYPE, --servertype=SERVERTYPE
+                             Choose which server to use, process or xmlrpc.
+       --revisions-changed   Set the exit code depending on whether upstream
+                             floating revisions have changed or not.
+       --server-only         Run bitbake without a UI, only starting a server
+                             (cooker) process.
+       -B BIND, --bind=BIND  The name/address for the bitbake server to bind to.
+       --no-setscene         Do not run any setscene tasks. sstate will be ignored
+                             and everything needed, built.
+       --remote-server=REMOTE_SERVER
+                             Connect to the specified server.
+       -m, --kill-server     Terminate the remote server.
+       --observe-only        Connect to a server as an observing-only client.
+       --status-only         Check the status of the remote bitbake server.
+                </literallayout>
+            </para>
+        </section>
+
+        <section id='bitbake-examples'>
+            <title>Examples</title>
+
+            <para>
+                This section presents some examples showing how to use BitBake.
+            </para>
+
+            <section id='example-executing-a-task-against-a-single-recipe'>
+                <title>Executing a Task Against a Single Recipe</title>
+
+                <para>
+                    Executing tasks for a single recipe file is relatively simple.
+                    You specify the file in question, and BitBake parses
+                    it and executes the specified task.
+                    If you do not specify a task, BitBake executes the default
+                    task, which is "build”.
+                    BitBake obeys inter-task dependencies when doing
+                    so.
+                </para>
+
+                <para>
+                    The following command runs the build task, which is
+                    the default task, on the <filename>foo_1.0.bb</filename>
+                    recipe file:
+                    <literallayout class='monospaced'>
+     $ bitbake -b foo_1.0.bb
+                    </literallayout>
+                    The following command runs the clean task on the
+                    <filename>foo.bb</filename> recipe file:
+                    <literallayout class='monospaced'>
+     $ bitbake -b foo.bb -c clean
+                    </literallayout>
+                    <note>
+                        The "-b" option explicitly does not handle recipe
+                        dependencies.
+                        Other than for debugging purposes, it is instead
+                        recommended that you use the syntax presented in the
+                        next section.
+                    </note>
+                </para>
+            </section>
+
+            <section id='executing-tasks-against-a-set-of-recipe-files'>
+                <title>Executing Tasks Against a Set of Recipe Files</title>
+
+                <para>
+                    There are a number of additional complexities introduced
+                    when one wants to manage multiple <filename>.bb</filename>
+                    files.
+                    Clearly there needs to be a way to tell BitBake what
+                    files are available, and of those, which you
+                    want to execute.
+                    There also needs to be a way for each recipe
+                    to express its dependencies, both for build-time and
+                    runtime.
+                    There must be a way for you to express recipe preferences
+                    when multiple recipes provide the same functionality, or when
+                    there are multiple versions of a  recipe.
+                </para>
+
+                <para>
+                    The <filename>bitbake</filename> command, when not using
+                    "--buildfile" or "-b" only accepts a "PROVIDES".
+                    You cannot provide anything else.
+                    By default, a recipe file generally "PROVIDES" its
+                    "packagename" as shown in the following example:
+                    <literallayout class='monospaced'>
+     $ bitbake foo
+                    </literallayout>
+                    This next example "PROVIDES" the package name and also uses
+                    the "-c" option to tell BitBake to just execute the
+                    <filename>do_clean</filename> task:
+                    <literallayout class='monospaced'>
+     $ bitbake -c clean foo
+                    </literallayout>
+                </para>
+            </section>
+
+            <section id='generating-dependency-graphs'>
+                <title>Generating Dependency Graphs</title>
+
+                <para>
+                    BitBake is able to generate dependency graphs using
+                    the <filename>dot</filename> syntax.
+                    You can convert these graphs into images using the
+                    <filename>dot</filename> tool from
+                    <ulink url='http://www.graphviz.org'>Graphviz</ulink>.
+                </para>
+
+                <para>
+                    When you generate a dependency graph, BitBake writes four files
+                    to the current working directory:
+                    <itemizedlist>
+                        <listitem><para><emphasis><filename>package-depends.dot</filename>:</emphasis>
+                            Shows BitBake's knowledge of dependencies between
+                            runtime targets.
+                            </para></listitem>
+                        <listitem><para><emphasis><filename>pn-depends.dot</filename>:</emphasis>
+                            Shows dependencies between build-time targets
+                            (i.e. recipes).
+                            </para></listitem>
+                        <listitem><para><emphasis><filename>task-depends.dot</filename>:</emphasis>
+                            Shows dependencies between tasks.
+                            </para></listitem>
+                        <listitem><para><emphasis><filename>pn-buildlist</filename>:</emphasis>
+                            Shows a simple list of targets that are to be built.
+                            </para></listitem>
+                    </itemizedlist>
+                </para>
+
+                <para>
+                    To stop depending on common depends, use the "-I" depend
+                    option and BitBake omits them from the graph.
+                    Leaving this information out can produce more readable graphs.
+                    This way, you can remove from the graph
+                    <filename>DEPENDS</filename> from inherited classes
+                    such as <filename>base.bbclass</filename>.
+                </para>
+
+                <para>
+                    Here are two examples that create dependency graphs.
+                    The second example omits depends common in OpenEmbedded from
+                    the graph:
+                    <literallayout class='monospaced'>
+     $ bitbake -g foo
+
+     $ bitbake -g -I virtual/kernel -I eglibc foo
+                    </literallayout>
+                </para>
+            </section>
+        </section>
+    </section>
+</chapter>

bitbake/doc/bitbake-user-manual/bitbake-user-manual-ref-variables.xml

@@ -12,6 +12,28 @@
     of their function and contents.
 </para>
 
+<note>
+    Following are some points regarding the variables listed in this glossary:
+    <itemizedlist>
+        <listitem><para>The variables listed in this glossary
+            are specific to BitBake.
+            Consequently, the descriptions are limited to that context.
+            </para></listitem>
+        <listitem><para>Also, variables exist in other systems that use BitBake
+            (e.g. The Yocto Project and OpenEmbedded) that have names identical
+            to those found in this glossary.
+            For such cases, the variables in those systems extend the
+            functionality of the variable as it is described here in
+            this glossary.
+            </para></listitem>
+        <listitem><para>Finally, there are variables mentioned in this
+            glossary that do not appear in the BitBake glossary.
+            These other variables are variables used in systems that use
+            BitBake.
+            </para></listitem>
+    </itemizedlist>
+</note>
+
 <glossary id='ref-variables-glossary'>
 
     <para>
@@ -80,6 +102,15 @@
             </glossdef>
         </glossentry>
 
+        <glossentry id='var-BB_CONSOLELOG'><glossterm>BB_CONSOLELOG</glossterm>
+            <glossdef>
+                <para>
+                    Specifies the path to a log file into which BitBake's user
+                    interface writes output during the build.
+                </para>
+            </glossdef>
+        </glossentry>
+
         <glossentry id='var-BB_CURRENTTASK'><glossterm>BB_CURRENTTASK</glossterm>
             <glossdef>
                 <para>
@@ -351,6 +382,8 @@
                     Git metadata, to be placed in the
                     <link linkend='var-DL_DIR'><filename>DL_DIR</filename></link>
                     directory.
+                    Anyone wishing to create a source mirror would want to
+                    enable this variable.
                 </para>
 
                 <para>
@@ -366,16 +399,15 @@
         <glossentry id='var-BB_HASHCONFIG_WHITELIST'><glossterm>BB_HASHCONFIG_WHITELIST</glossterm>
             <glossdef>
                 <para>
-                    Lists variables that are excluded from checksum
-                    comparisons to determine if the cache can be reused.
+                    Lists variables that are excluded from base configuration
+                    checksum, which is used to determine if the cache can
+                    be reused.
                 </para>
 
                 <para>
                     One of the ways BitBake determines whether to re-parse the
                     main metadata is through checksums of the variables in the
-                    datastore of the base configuration data (see the
-                    <link linkend='var-BB_HASHBASE_WHITELIST'><filename>BB_HASHBASE_WHITELIST</filename></link>
-                    variable).
+                    datastore of the base configuration data.
                     There are variables that you typically want to exclude when
                     checking whether or not to re-parse and thus rebuild the
                     cache.
@@ -658,12 +690,19 @@
         <glossentry id='var-BB_SIGNATURE_EXCLUDE_FLAGS'><glossterm>BB_SIGNATURE_EXCLUDE_FLAGS</glossterm>
             <glossdef>
                 <para>
-                    Lists flags that can be safely excluded from checksum
+                    Lists variable flags (varflags)
+                    that can be safely excluded from checksum
                     and dependency data for keys in the datastore.
                     When generating checksum or dependency data for keys in the
                     datastore, the flags set against that key are normally
                     included in the checksum.
                 </para>
+
+                <para>
+                    For more information on varflags, see the
+                    "<link linkend='variable-flags'>Variable Flags</link>"
+                    section.
+                </para>
             </glossdef>
         </glossentry>
 
@@ -824,15 +863,15 @@
                 <para>
                     Allows you to extend a recipe so that it builds variants
                     of the software.
-                    Common variants for recipes exist such as "natives"
-                    like <filename>quilt-native</filename>,
-                    which is a copy of Quilt built to run on the build system;
-                    "crosses" such as <filename>gcc-cross</filename>,
-                    which is a compiler built to run on the build machine
-                    but produces binaries that run on the target
-                    <filename>MACHINE</filename>; "nativesdk", which targets
-                    the SDK machine instead of <filename>MACHINE</filename>;
-                    and "mulitlibs" in the form
+                    Some examples of these variants for recipes from the
+                    OpenEmbedded Core metadata are "natives" such as
+                    <filename>quilt-native</filename>, which is a copy of
+                    Quilt built to run on the build system; "crosses" such
+                    as <filename>gcc-cross</filename>, which is a compiler
+                    built to run on the build machine but produces binaries
+                    that run on the target <filename>MACHINE</filename>;
+                    "nativesdk", which targets the SDK machine instead of
+                    <filename>MACHINE</filename>; and "mulitlibs" in the form
                     "<filename>multilib:&lt;multilib_name&gt;</filename>".
                 </para>
 
@@ -936,7 +975,23 @@
 
         <glossentry id='var-BBINCLUDELOGS'><glossterm>BBINCLUDELOGS</glossterm>
             <glossdef>
-                <para>Variable that controls how BitBake displays logs on build failure.</para>
+                <para>
+                    If set to a value, enables printing the task log when
+                    reporting a failed task.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BBINCLUDELOGS_LINES'><glossterm>BBINCLUDELOGS_LINES</glossterm>
+            <glossdef>
+                <para>
+                    If
+                    <link linkend='var-BBINCLUDELOGS'><filename>BBINCLUDELOGS</filename></link>
+                    is set, specifies the maximum number of lines from the
+                    task log file to print when reporting a failed task.
+                    If you do not set <filename>BBINCLUDELOGS_LINES</filename>,
+                    the entire log is printed.
+                </para>
             </glossdef>
         </glossentry>
 
@@ -1025,20 +1080,21 @@
                     (<filename>.conf</filename>) files.
                     This variable is analogous to the
                     <filename>PATH</filename> variable.
-                    <note>
-                        If you run BitBake from a directory outside of the
-                        build directory,
-                        you must be sure to set
-                        <filename>BBPATH</filename> to point to the
-                        build directory.
-                        Set the variable as you would any environment variable
-                        and then run BitBake:
-                        <literallayout class='monospaced'>
-     $ BBPATH = "&lt;build_directory&gt;"
+                </para>
+
+                <para>
+                    If you run BitBake from a directory outside of the
+                    build directory,
+                    you must be sure to set
+                    <filename>BBPATH</filename> to point to the
+                    build directory.
+                    Set the variable as you would any environment variable
+                    and then run BitBake:
+                    <literallayout class='monospaced'>
+     $ BBPATH="&lt;build_directory&gt;"
      $ export BBPATH
      $ bitbake &lt;target&gt;
-                        </literallayout>
-                    </note>
+                    </literallayout>
                 </para>
             </glossdef>
         </glossentry>
@@ -1053,6 +1109,27 @@
             </glossdef>
         </glossentry>
 
+        <glossentry id='var-BBVERSIONS'><glossterm>BBVERSIONS</glossterm>
+            <glossdef>
+                <para>
+                    Allows a single recipe to build multiple versions of a
+                    project from a single recipe file.
+                    You also able to specify conditional metadata
+                    using the
+                    <link linkend='var-OVERRIDES'><filename>OVERRIDES</filename></link>
+                    mechanism for a single version or for an optionally named
+                    range of versions.
+                </para>
+
+                <para>
+                    For more information on <filename>BBVERSIONS</filename>,
+                    see the
+                    "<link linkend='variants-class-extension-mechanism'>Variants - Class Extension Mechanism</link>"
+                    section.
+                </para>
+            </glossdef>
+        </glossentry>
+
         <glossentry id='var-BITBAKE_UI'><glossterm>BITBAKE_UI</glossterm>
             <glossdef>
                 <para>
@@ -1439,14 +1516,6 @@
                     the upstream source, and then locations specified by
                     <filename>MIRRORS</filename> in that order.
                 </para>
-
-                <para>
-                    Assuming your distribution (<filename>DISTRO</filename>)
-                    is "poky", the default value for
-                    <filename>MIRRORS</filename> is defined in the
-                    <filename>conf/distro/poky.conf</filename> file in the
-                    <filename>meta-yocto</filename> Git repository.
-                </para>
             </glossdef>
         </glossentry>
 
@@ -1652,15 +1721,6 @@
                     in that order.
                 </para>
 
-                <para>
-                    Assuming your distribution
-                    (<filename>DISTRO</filename>)
-                    is "poky", the default value for
-                    <filename>PREMIRRORS</filename> is defined in the
-                    <filename>conf/distro/poky.conf</filename> file in the
-                    <filename>meta-yocto</filename> Git repository.
-                </para>
-
                 <para>
                     Typically, you would add a specific server for the
                     build system to attempt before any others by adding
@@ -1872,16 +1932,15 @@
                 <para>
                     The list of source files - local or remote.
                     This variable tells BitBake which bits
-                    to pull in for the build and how to pull them in.
-                    For example, if the recipe or append file only needs to
-                    fetch a tarball from the Internet, the recipe or
+                    to pull for the build and how to pull them.
+                    For example, if the recipe or append file needs to
+                    fetch a single tarball from the Internet, the recipe or
                     append file uses a <filename>SRC_URI</filename>
-                    entry that specifies just the tarball.
+                    entry that specifies that tarball.
                     On the other hand, if the recipe or append file needs to
-                    fetch a tarball, apply two patches, and include a custom
-                    file, the recipe or append file needs an
-                    <filename>SRC_URI</filename> variable that specifies all
-                    those sources.</para>
+                    fetch a tarball and include a custom file, the recipe or
+                    append file needs an <filename>SRC_URI</filename> variable
+                    that specifies all those sources.</para>
                 <para>The following list explains the available URI protocols:
                     <itemizedlist>
                         <listitem><para><emphasis><filename>file://</filename> -</emphasis>
@@ -1899,8 +1958,6 @@
                             an OSC (OpenSUSE Build service) revision control repository.</para></listitem>
                         <listitem><para><emphasis><filename>repo://</filename> -</emphasis> Fetches files from
                             a repo (Git) repository.</para></listitem>
-                        <listitem><para><emphasis><filename>svk://</filename> -</emphasis> Fetches files from
-                            an SVK revision control repository.</para></listitem>
                         <listitem><para><emphasis><filename>http://</filename> -</emphasis> Fetches files from
                             the Internet using HTTP.</para></listitem>
                         <listitem><para><emphasis><filename>https://</filename> -</emphasis> Fetches files

bitbake/doc/bitbake-user-manual/bitbake-user-manual.xml

@@ -73,14 +73,16 @@
         </legalnotice>
     </bookinfo>
 
-    <xi:include href="user-manual-intro.xml"/>
+    <xi:include href="bitbake-user-manual-intro.xml"/>
 
-    <xi:include href="user-manual-metadata.xml"/>
+    <xi:include href="bitbake-user-manual-execution.xml"/>
 
-    <xi:include href="user-manual-fetching.xml"/>
+    <xi:include href="bitbake-user-manual-metadata.xml"/>
 
-    <xi:include href="user-manual-bitbakecommand.xml"/>
+    <xi:include href="bitbake-user-manual-fetching.xml"/>
 
-    <xi:include href="user-manual-ref-variables.xml"/>
+    <xi:include href="bitbake-user-manual-ref-variables.xml"/>
+
+    <xi:include href="bitbake-user-manual-hello.xml"/>
 
 </book>

bitbake/doc/template/titlepage.templates.xml

@@ -144,7 +144,7 @@
 
 # If you leave this block of code in then the text title in the
 # <title>BitBake User Manual</title> statement of the
-# user-manual.xml file is rendered on the title page below the
+# bitbake-user-manual.xml file is rendered on the title page below the
 # image.  Commenting it out gets it out of there yet allows it
 # to be retained in the tab text for the HTML version of the
 # manual.
@@ -176,7 +176,7 @@
 <!--
 # If you leave this block of code in then the text title in the
 # <title>BitBake User Manual</title> statement of the
-# user-manual.xml file is rendered on the title page below the
+# bitbake-user-manual.xml file is rendered on the title page below the
 # image.  Commenting it out gets it out of there yet allows it
 # to be retained in the tab text for the HTML version of the
 # manual.

bitbake/doc/user-manual/user-manual-bitbakecommand.xml

@@ -1,367 +0,0 @@
-<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
-"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
-
-<chapter>
-    <title>The BitBake Command</title>
-
-    <section id='bitbake-command-introduction'>
-        <title>Introduction</title>
-
-        <para>
-            Bitbake is the primary command in the system.
-            It facilitates executing tasks in a single <filename>.bb</filename>
-            file, or executing a given task on a set of multiple
-            <filename>.bb</filename> files, accounting for interdependencies
-            amongst them.
-        </para>
-    </section>
-
-    <section id='usage-and-syntax'>
-        <title>Usage and syntax</title>
-
-        <para>
-            Following is the usage and syntax for BitBake:
-            <literallayout class='monospaced'>
-     $ bitbake -h
-Usage: bitbake [options] [recipename/target ...]
-
-    Executes the specified task (default is 'build') for a given set of target recipes (.bb files).
-    It is assumed there is a conf/bblayers.conf available in cwd or in BBPATH which
-    will provide the layer, BBFILES and other configuration information.
-
-Options:
-  --version             show program's version number and exit
-  -h, --help            show this help message and exit
-  -b BUILDFILE, --buildfile=BUILDFILE
-                        Execute tasks from a specific .bb recipe directly.
-                        WARNING: Does not handle any dependencies from other
-                        recipes.
-  -k, --continue        Continue as much as possible after an error. While the
-                        target that failed and anything depending on it cannot
-                        be built, as much as possible will be built before
-                        stopping.
-  -a, --tryaltconfigs   Continue with builds by trying to use alternative
-                        providers where possible.
-  -f, --force           Force the specified targets/task to run (invalidating
-                        any existing stamp file).
-  -c CMD, --cmd=CMD     Specify the task to execute. The exact options
-                        available depend on the metadata. Some examples might
-                        be 'compile' or 'populate_sysroot' or 'listtasks' may
-                        give a list of the tasks available.
-  -C INVALIDATE_STAMP, --clear-stamp=INVALIDATE_STAMP
-                        Invalidate the stamp for the specified task such as
-                        'compile' and then run the default task for the
-                        specified target(s).
-  -r PREFILE, --read=PREFILE
-                        Read the specified file before bitbake.conf.
-  -R POSTFILE, --postread=POSTFILE
-                        Read the specified file after bitbake.conf.
-  -v, --verbose         Output more log message data to the terminal.
-  -D, --debug           Increase the debug level. You can specify this more
-                        than once.
-  -n, --dry-run         Don't execute, just go through the motions.
-  -S, --dump-signatures
-                        Don't execute, just dump out the signature
-                        construction information.
-  -p, --parse-only      Quit after parsing the BB recipes.
-  -s, --show-versions   Show current and preferred versions of all recipes.
-  -e, --environment     Show the global or per-package environment complete
-                        with information about where variables were
-                        set/changed.
-  -g, --graphviz        Save dependency tree information for the specified
-                        targets in the dot syntax.
-  -I EXTRA_ASSUME_PROVIDED, --ignore-deps=EXTRA_ASSUME_PROVIDED
-                        Assume these dependencies don't exist and are already
-                        provided (equivalent to ASSUME_PROVIDED). Useful to
-                        make dependency graphs more appealing
-  -l DEBUG_DOMAINS, --log-domains=DEBUG_DOMAINS
-                        Show debug logging for the specified logging domains
-  -P, --profile         Profile the command and save reports.
-  -u UI, --ui=UI        The user interface to use (e.g. knotty, hob, depexp).
-  -t SERVERTYPE, --servertype=SERVERTYPE
-                        Choose which server to use, process or xmlrpc.
-  --revisions-changed   Set the exit code depending on whether upstream
-                        floating revisions have changed or not.
-  --server-only         Run bitbake without a UI, only starting a server
-                        (cooker) process.
-  -B BIND, --bind=BIND  The name/address for the bitbake server to bind to.
-  --no-setscene         Do not run any setscene tasks. sstate will be ignored
-                        and everything needed, built.
-  --remote-server=REMOTE_SERVER
-                        Connect to the specified server.
-  -m, --kill-server     Terminate the remote server.
-  --observe-only        Connect to a server as an observing-only client.
-  --status-only         Check the status of the remote bitbake server.
-
-            </literallayout>
-        </para>
-    </section>
-
-    <section id='bitbake-examples'>
-        <title>Examples</title>
-
-        <para>
-            This section presents some examples showing how to use BitBake.
-        </para>
-
-        <section id='example-executing-a-task-against-a-single-recipe'>
-            <title>Executing a Task Against a Single Recipe</title>
-
-            <para>
-                Executing tasks for a single recipe file is relatively simple.
-                You specify the file in question, and BitBake parses
-                it and executes the specified task (or “build” by default).
-                BitBake obeys inter-task dependencies when doing
-                so.
-            </para>
-
-            <para>
-                The following command runs the clean task on the
-                <filename>foo_1.0.bb</filename> recipe file:
-                <literallayout class='monospaced'>
-     $ bitbake -b foo.bb -c clean
-                </literallayout>
-                The following command runs the build task, which is
-                the default task, on the <filename>foo_1.0.bb</filename>
-                recipe file:
-                <literallayout class='monospaced'>
-     $ bitbake -b foo_1.0.bb
-                </literallayout>
-            </para>
-        </section>
-
-        <section id='executing-tasks-against-a-set-of-recipe-files'>
-            <title>Executing Tasks Against a Set of Recipe Files</title>
-
-            <para>
-                There are a number of additional complexities introduced
-                when one wants to manage multiple <filename>.bb</filename>
-                files.
-                Clearly there needs to be a way to tell BitBake what
-                files are available, and of those, which we
-                want to execute at this time.
-                There also needs to be a way for each <filename>.bb</filename>
-                to express its dependencies, both for build-time and
-                runtime.
-                There must be a way for the user to express their preferences
-                when multiple recipes provide the same functionality, or when
-                there are multiple versions of a  <filename>.bb</filename> file.
-            </para>
-
-            <para>
-                The next section, Metadata, outlines how to specify such things.
-            </para>
-
-            <para>
-                The <filename>bitbake</filename> command, when not using
-                "--buildfile", accepts a PROVIDER, not a filename or
-                anything else.
-                By default, a <filename>.bb</filename> generally PROVIDES its
-                packagename, packagename-version, and packagename-version-revision.
-                <literallayout class='monospaced'>
-     $ bitbake foo
-
-     $ bitbake foo-1.0
-
-     $ bitbake foo-1.0-r0
-
-     $ bitbake -c clean foo
-
-     $ bitbake virtual/whatever
-
-     $ bitbake -c clean virtual/whatever
-                </literallayout>
-            </para>
-        </section>
-
-        <section id='generating-dependency-graphs'>
-            <title>Generating Dependency Graphs</title>
-
-            <para>
-                BitBake is able to generate dependency graphs using
-                the dot syntax.
-                These graphs can be converted to images using the dot
-                application from
-                <ulink url='http://www.graphviz.org'>Graphviz</ulink>.
-                Two files will be written into the current working directory:
-                <filename>depends.dot</filename> containing dependency information
-                at the package level and <filename>task-depends.dot</filename>
-                containing a breakdown of the dependencies at the task level.
-                To stop depending on common depends, one can use the "-I" depend
-                option to omit these from the graph.
-                This can lead to more readable graphs.
-                This way, <filename>DEPENDS</filename> from inherited classes
-                such as <filename>base.bbclass</filename> can be removed from the
-                graph.
-                <literallayout class='monospaced'>
-     $ bitbake -g foo
-
-     $ bitbake -g -I virtual/whatever -I bloom foo
-                </literallayout>
-            </para>
-        </section>
-    </section>
-
-    <section id='special-variables'>
-        <title>Special Variables</title>
-
-        <para>
-            Certain variables affect BitBake operation:
-        </para>
-
-        <section id='bb-number-threads'>
-            <title><filename>BB_NUMBER_THREADS</filename></title>
-
-            <para>
-                The number of threads BitBake should run at once (default: 1).
-            </para>
-        </section>
-    </section>
-
-    <section id='bitbake-command-metadata'>
-        <title>Metadata</title>
-
-        <para>
-            As you may have seen in the usage information, or in the
-            information about <filename>.bb</filename> files, the
-            <filename>BBFILES</filename> variable is how the BitBake
-            tool locates its files.
-            This variable is a space-separated list of files
-            that are available, and supports wildcards.
-        </para>
-
-        <section id='setting-bbfiles'>
-            <title>Setting <filename>BBFILES</filename></title>
-
-            <para>
-                <literallayout class='monospaced'>
-     BBFILES = "/path/to/bbfiles/*.bb"
-                </literallayout>
-                With regard to dependencies, it expects the
-                <filename>.bb</filename> to define a
-                <filename>DEPENDS</filename> variable, which contains a
-                space separated list of “package names”, which themselves
-                are the <filename>PN</filename> variable. The
-                <filename>PN</filename> variable is, in general,
-                set to a component of the <filename>.bb</filename>
-                filename by default.
-            </para>
-        </section>
-
-        <section id='depending-on-another-recipe-file'>
-            <title>Depending on Another Recipe File</title>
-
-            <para>
-                <literallayout class='monospaced'>
-     a.bb:
-
-     PN = "package-a"
-     DEPENDS += "package-b"
-
-     b.bb:
-
-     PN = "package-b"
-                </literallayout>
-            </para>
-        </section>
-
-        <section id='using-provides'>
-            <title>Using <filename>PROVIDES</filename></title>
-
-            <para>
-                This example shows the usage of the
-                <filename>PROVIDES</filename> variable, which allows a
-                given <filename>.bb</filename> to specify what
-                functionality it provides.
-                <literallayout class='monospaced'>
-     package1.bb:
-
-     PROVIDES += "virtual/package"
-
-     package2.bb:
-
-     DEPENDS += "virtual/package"
-
-     package3.bb:
-
-     PROVIDES += "virtual/package"
-                </literallayout>
-                As you can see, we have two different
-                recipes that provide the same functionality
-                (virtual/package).
-                Clearly, there needs to be a way for the person running
-                BitBake to control which of those providers
-                gets used.
-                There is, indeed, such a way.
-            </para>
-
-            <para>
-                The following would go into a <filename>.conf</filename>
-                file, to select package1:
-                <literallayout class='monospaced'>
-     PREFERRED_PROVIDER_virtual/package = "package1"
-                </literallayout>
-            </para>
-        </section>
-
-        <section id='specifying-version-preference'>
-            <title>Specifying Version Preference</title>
-
-            <para>
-                When there are multiple “versions” of a given package,
-                BitBake defaults to selecting the most recent
-                version, unless otherwise specified.
-                If the <filename>.bb</filename> in question has a
-                <filename>DEFAULT_PREFERENCE</filename> set lower than
-                the other recipes (default is 0), then it will not be
-                selected.
-                This allows the person or persons maintaining
-                the repository of <filename>.bb</filename> files to specify
-                their preference for the default selected version.
-                In addition, the user can specify their preferred version.
-            </para>
-
-            <para>
-                If the first <filename>.bb</filename> is named
-                <filename>a_1.1.bb</filename>, then the
-                <filename>PN</filename> variable will be set to
-                “a”, and the <filename>PV</filename> variable will be
-                set to 1.1.
-            </para>
-
-            <para>
-                If we then have an <filename>a_1.2.bb</filename>, BitBake
-                will choose 1.2 by default.
-                However, if we define the following variable in a
-                <filename>.conf</filename> file that BitBake parses, we
-                can change that.
-                <literallayout class='monospaced'>
-     PREFERRED_VERSION_a = "1.1"
-                </literallayout>
-            </para>
-        </section>
-
-        <section id='using-recipe-file-collections'>
-            <title>Using Recipe File Collections</title>
-
-            <para>
-                Recipe file collections exist to allow the user to
-                have multiple repositories of
-                <filename>.bb</filename> files that contain the same
-                exact package.
-                For example, one could easily use them to make one's
-                own local copy of an upstream repository, but with
-                custom modifications that one does not want upstream.
-                Here is an example:
-                <literallayout class='monospaced'>
-    BBFILES = "/stuff/openembedded/*/*.bb /stuff/openembedded.modified/*/*.bb"
-    BBFILE_COLLECTIONS = "upstream local"
-    BBFILE_PATTERN_upstream = "^/stuff/openembedded/"
-    BBFILE_PATTERN_local = "^/stuff/openembedded.modified/"
-    BBFILE_PRIORITY_upstream = "5"
-    BBFILE_PRIORITY_local = "10"
-                </literallayout>
-            </para>
-        </section>
-    </section>
-</chapter>

bitbake/doc/user-manual/user-manual-fetching.xml

@@ -1,230 +0,0 @@
-<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
-"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
-
-<chapter>
-<title>File download support</title>
-
-    <section id='file-download-overview'>
-        <title>Overview</title>
-
-        <para>
-            BitBake provides support to download files.
-            This procedure is called fetching and is handled by the
-            fetch and fetch2 modules.
-            At this point, the original fetch code is considered to
-            be replaced by fetch2 and this manual is only related
-            to the fetch2 codebase.
-        </para>
-
-        <para>
-            The <filename>SRC_URI</filename> is normally used to
-            tell BitBake which files to fetch.
-            The next sections describe the available fetchers and
-            their options.
-            Each fetcher honors a set of variables and per
-            URI parameters separated by a “;” consisting of a key and
-            a value.
-            The semantics of the variables and parameters are
-            defined by the fetcher.
-            BitBake tries to have consistent semantics between the
-            different fetchers.
-        </para>
-
-        <para>
-            The overall fetch process first attempts to fetch from
-            <filename>PREMIRRORS</filename>.
-            If these fail, the original <filename>SRC_URI</filename>
-            is attempted.
-            If that fails, BitBake falls back to
-            <filename>MIRRORS</filename>.
-            Because cross-URLs are supported, it is possible to mirror
-            a Git repository on an HTTP server as a tarball.
-            Here are some examples that show commonly used mirror
-            definitions:
-            <literallayout class='monospaced'>
-PREMIRRORS ?= "\
-    bzr://.*/.*   http://somemirror.org/sources/ \n \
-    cvs://.*/.*   http://somemirror.org/sources/ \n \
-    git://.*/.*   http://somemirror.org/sources/ \n \
-    hg://.*/.*    http://somemirror.org/sources/ \n \
-    osc://.*/.*   http://somemirror.org/sources/ \n \
-    p4://.*/.*    http://somemirror.org/sources/ \n \
-    svk://.*/.*   http://somemirror.org/sources/ \n \
-    svn://.*/.*   http://somemirror.org/sources/ \n"
-
-MIRRORS =+ "\
-    ftp://.*/.*      http://somemirror.org/sources/ \n \
-    http://.*/.*     http://somemirror.org/sources/ \n \
-    https://.*/.*    http://somemirror.org/sources/ \n"
-            </literallayout>
-        </para>
-
-        <para>
-            Non-local downloaded output is placed
-            into the directory specified by the
-            <filename>DL_DIR</filename> variable.
-            For non local archive downloads, the code can verify
-            sha256 and md5 checksums for the download to ensure
-            the file has been downloaded correctly.
-            These can be specified in the following forms
-            for md5 and sha256 checksums, respectively:
-            <literallayout class='monospaced'>
-     SRC_URI[md5sum]
-     SRC_URI[sha256sum]
-            </literallayout>
-            You can also specify them as parameters on the
-            <filename>SRC_URI</filename>:
-            <literallayout class='monospaced'>
-     SRC_URI="http://example.com/foobar.tar.bz2;md5sum=4a8e0f237e961fd7785d19d07fdb994d"
-            </literallayout>
-            If <filename>BB_STRICT_CHECKSUM</filename> is set, any download
-            without a checksum will trigger an error message.
-            In cases where multiple files are listed in
-            <filename>SRC_URI</filename>, the name parameter is used
-            assign names to the URLs and these are then specified
-            in the checksums using the following form:
-            <literallayout class='monospaced'>
-     SRC_URI[name.sha256sum]
-            </literallayout>
-        </para>
-    </section>
-
-    <section id='local-file-fetcher'>
-        <title>Local file fetcher</title>
-
-        <para>
-            The URN for the local file fetcher is file.
-            The filename can be either absolute or relative.
-            If the filename is relative,
-            <filename>FILESPATH</filename> and failing that
-            <filename>FILESDIR</filename> will be used to find the
-            appropriate relative file.
-            The metadata usually extend these variables to include
-            variations of the values in <filename>OVERRIDES</filename>.
-            Single files and complete directories can be specified.
-            <literallayout class='monospaced'>
-     SRC_URI = "file://relativefile.patch"
-     SRC_URI = "file://relativefile.patch;this=ignored"
-     SRC_URI = "file:///Users/ich/very_important_software"
-            </literallayout>
-        </para>
-    </section>
-
-    <section id='cvs-fetcher'>
-        <title>CVS fetcher</title>
-
-        <para>
-            The URN for the CVS fetcher is cvs.
-            This fetcher honors the variables <filename>CVSDIR</filename>,
-            <filename>SRCDATE</filename>, <filename>FETCHCOMMAND_cvs</filename>,
-            <filename>UPDATECOMMAND_cvs</filename>.
-            <filename>DL_DIR</filename> specifies where a
-            temporary checkout is saved.
-            <filename>SRCDATE</filename> specifies which date to
-            use when doing the fetching (the special value of "now"
-            will cause the checkout to be updated on every build).
-            <filename>FETCHCOMMAND</filename> and
-            <filename>UPDATECOMMAND</filename> specify which executables
-            to use for the CVS checkout or update.
-        </para>
-
-        <para>
-            The supported parameters are module, tag, date,
-            method, localdir, rshand scmdata.
-            The module specifies which module to check out,
-            the tag describes which CVS TAG should be used for
-            the checkout.
-            By default, the TAG is empty.
-            A date can be specified to override the
-            <filename>SRCDATE</filename> of the
-            configuration to checkout a specific date.
-            The special value of "now" will cause the checkout to be
-            updated on every build.
-            method is by default pserver.
-            If ext is used the rsh parameter will be evaluated
-            and <filename>CVS_RSH</filename> will be set.
-            Finally, localdir is used to checkout into a special
-            directory relative to <filename>CVSDIR</filename>.
-            <literallayout class='monospaced'>
-     SRC_URI = "cvs://CVSROOT;module=mymodule;tag=some-version;method=ext"
-     SRC_URI = "cvs://CVSROOT;module=mymodule;date=20060126;localdir=usethat"
-            </literallayout>
-        </para>
-    </section>
-
-    <section id='http-ftp-fetcher'>
-        <title>HTTP/FTP fetcher</title>
-
-        <para>
-            The URNs for the HTTP/FTP fetcher are http, https, and ftp.
-            This fetcher honors the variables
-            <filename>FETCHCOMMAND_wget</filename>.
-            <filename>FETCHCOMMAND</filename> contains the command used
-            for fetching.
-            “${URI}” and “${FILES}” will be replaced by the URI and
-            basename of the file to be fetched.
-            <literallayout class='monospaced'>
-     SRC_URI = "http://oe.handhelds.org/not_there.aac"
-     SRC_URI = "ftp://oe.handhelds.org/not_there_as_well.aac"
-     SRC_URI = "ftp://you@oe.handheld.sorg/home/you/secret.plan"
-            </literallayout>
-        </para>
-    </section>
-
-    <section id='svn-fetcher'>
-        <title>SVN Fetcher</title>
-
-        <para>
-            The URN for the SVN fetcher is svn.
-        </para>
-
-        <para>
-            This fetcher honors the variables
-            <filename>FETCHCOMMAND_svn</filename>,
-            <filename>SVNDIR</filename>,
-            and <filename>SRCREV</filename>.
-            <filename>FETCHCOMMAND</filename> contains the
-            subversion command.
-            <filename>SRCREV</filename> specifies which revision
-            to use when doing the fetching.
-        </para>
-
-        <para>
-            The supported parameters are proto, rev and scmdata.
-            proto is the Subversion protocol, rev is the
-            Subversion revision.
-            If scmdata is set to “keep”, the “.svn” directories will
-            be available during compile-time.
-            <literallayout class='monospaced'>
-     SRC_URI = "svn://svn.oe.handhelds.org/svn;module=vip;proto=http;rev=667"
-     SRC_URI = "svn://svn.oe.handhelds.org/svn/;module=opie;proto=svn+ssh;date=20060126"
-            </literallayout>
-        </para>
-    </section>
-
-    <section id='git-fetcher'>
-        <title>GIT Fetcher</title>
-
-        <para>
-            The URN for the GIT Fetcher is git.
-        </para>
-
-        <para>
-            The variable <filename>GITDIR</filename> will be used as the
-            base directory where the Git tree is cloned to.
-        </para>
-
-        <para>
-            The parameters are tag, protocol, and scmdata.
-            The tag parameter is a Git tag, the default is “master”.
-            The protocol tag is the Git protocol to use and defaults to “git”
-            if a hostname is set, otherwise it is “file”.
-            If scmdata is set to “keep”, the “.git” directory will be available
-            during compile-time.
-            <literallayout class='monospaced'>
-     SRC_URI = "git://git.oe.handhelds.org/git/vip.git;tag=version-1"
-     SRC_URI = "git://git.oe.handhelds.org/git/vip.git;protocol=http"
-            </literallayout>
-        </para>
-    </section>
-</chapter>

bitbake/doc/user-manual/user-manual-hello.xml

@@ -1,321 +0,0 @@
-<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
-"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
-
-<chapter id='hello'>
-    <title>A BitBake Hello World</title>
-
-    <section id='bitbake-hello-world'>
-        <title>BitBake Hello World</title>
-
-        <para>
-            The simplest example commonly used to demonstrate any new
-            programming language or tool is the
-            <ulink url="http://en.wikipedia.org/wiki/Hello_world_program">Hello World</ulink>
-            example.
-            This chapter demonstrates, in tutorial form, Hello
-            World within the context of BitBake.
-            This tutorial describes how to create a new Project
-            and the applicable metadata files necessary to allow
-            BitBake to build it.
-        </para>
-    </section>
-
-    <section id='obtaining-bitbake'>
-        <title>Obtaining BitBake</title>
-
-        <para>
-            Please refer to Chapter 1 Section 1.7 for the various methods to
-            obtain BitBake.
-            Once the source code is on your machine the BitBake directory will
-            appear as follows:
-            <literallayout class='monospaced'>
-     $ ls -al
-     total 100
-     drwxrwxr-x. 9 wmat wmat  4096 Jan 31 13:44 .
-     drwxrwxr-x. 3 wmat wmat  4096 Feb  4 10:45 ..
-     -rw-rw-r--. 1 wmat wmat   365 Nov 26 04:55 AUTHORS
-     drwxrwxr-x. 2 wmat wmat  4096 Nov 26 04:55 bin
-     drwxrwxr-x. 4 wmat wmat  4096 Jan 31 13:44 build
-     -rw-rw-r--. 1 wmat wmat 16501 Nov 26 04:55 ChangeLog
-     drwxrwxr-x. 2 wmat wmat  4096 Nov 26 04:55 classes
-     drwxrwxr-x. 2 wmat wmat  4096 Nov 26 04:55 conf
-     drwxrwxr-x. 3 wmat wmat  4096 Nov 26 04:55 contrib
-     -rw-rw-r--. 1 wmat wmat 17987 Nov 26 04:55 COPYING
-     drwxrwxr-x. 3 wmat wmat  4096 Nov 26 04:55 doc
-     -rw-rw-r--. 1 wmat wmat    69 Nov 26 04:55 .gitignore
-     -rw-rw-r--. 1 wmat wmat   849 Nov 26 04:55 HEADER
-     drwxrwxr-x. 5 wmat wmat  4096 Jan 31 13:44 lib
-     -rw-rw-r--. 1 wmat wmat   195 Nov 26 04:55 MANIFEST.in
-     -rwxrwxr-x. 1 wmat wmat  3195 Jan 31 11:57 setup.py
-     -rw-rw-r--. 1 wmat wmat  2887 Nov 26 04:55 TODO
-            </literallayout>
-        </para>
-
-        <para>
-            At this point you should have BitBake extracted or cloned to
-            a directory and it should match the directory tree above.
-            Please note that you'll see your username wherever
-            "wmat" appears above.
-        </para>
-    </section>
-
-    <section id='setting-up-the-bitbake-environment'>
-        <title>Setting Up the BitBake Environment</title>
-
-        <para>
-            The recommended method to run BitBake is from a directory of your
-            choice.
-            The directory can be within your home directory or in
-            <filename>/usr/local</filename>,
-            depending on your preference.
-            Let's run BitBake now to make sure it's working.
-        </para>
-
-        <para>
-            From the BitBake source code directory, issue the following command:
-            <literallayout class='monospaced'>
-     $ ./bin/bitbake --version
-     BitBake Build Tool Core version 1.19.0, bitbake version
-     1.19.0
-            </literallayout>
-            You're now ready to use BitBake.
-        </para>
-
-        <para>
-            A final step to make development easier is to add the executable
-            binary to your environment <filename>PATH</filename>.
-            First, have a look at your current <filename>PATH</filename> variable.
-            If I check mine, I get:
-            <literallayout class='monospaced'>
-     $ echo $PATH
-     /home/wmat/bin:/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:
-     /usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games
-            </literallayout>
-            Now add the directory location for the BitBake binary to the <filename>PATH</filename>
-            with:
-            <literallayout class='monospaced'>
-     $ export PATH={path to the bitbake executable}:$PATH
-            </literallayout>
-            This will add the directory to the beginning of your PATH environment
-            variable.
-            For example, on my machine:
-            <literallayout class='monospaced'>
-     $ export PATH=/media/wmat/Backups/dev/bitbake/bin:$PATH
-     /media/wmat/Backups/dev/bitbake/bin:/home/wmat/bin:
-     /usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:
-     /usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games
-            </literallayout>
-            Now, you should be able to simply enter the
-            <filename>bitbake</filename>
-            command at the command line to run bitbake.
-            For a more permanent solution and assuming you are running the BASH
-            shell, edit <filename>~/.bashrc</filename> and add the following to the end
-            of that file:
-            <literallayout class='monospaced'>
-     PATH={path to the bitbake executable}:$PATH
-            </literallayout>
-        </para>
-
-        <para>
-            Note that if you're a Vim user, you will find useful
-            Vim configuration contributions in the
-            <filename>contrib/vim</filename> directory.
-            Copy the files from that directory to your
-            <filename>/home/yourusername/.vim</filename>
-            directory.
-            If it doesn't exist, create it, and restart Vim.
-        </para>
-    </section>
-
-    <section id='the-hello-world-example'>
-        <title>The Hello World Example</title>
-
-        <para>
-            The following example leaps directly into how BitBake
-            works.
-            Every attempt is made to explain what is happening,
-            however, further information can be found in the
-            Metadata chapter.
-        </para>
-
-        <para>
-            The overall goal of this exercise is to create a Hello
-            World example utilizing concepts used to
-            build and construct a complete example application
-            including Tasks and Layers.
-            This is how modern projects such as OpenEmbedded and
-            the Yocto Project utilize BitBake, therefore it
-            provides an excellent starting point for understanding
-            BitBake.
-        </para>
-
-        <para>
-            It should be noted that this chapter was inspired by
-            and draws heavily from several sources:
-            <itemizedlist>
-                <listitem><para>
-                    <ulink href="http://www.mail-archive.com/yocto@yoctoproject.org/msg09379.html">Mailing List post - The BitBake equivalent of "Hello, World!"</ulink>
-                    </para></listitem>
-                <listitem><para>
-                    <ulink href="http://hambedded.org/blog/2012/11/24/from-bitbake-hello-world-to-an-image/">Hambedded Linux blog post - From Bitbake Hello World to an Image</ulink>
-                    </para></listitem>
-            </itemizedlist>
-        </para>
-
-        <section id='a-reverse-walkthrough'>
-            <title>A Reverse Walkthrough</title>
-
-            <para>
-                One of the best means to understand anything is to walk
-                through the steps to where we want to be by observing first
-                principles.
-                BitBake allows us to do this through the -D or Debug command
-               line parameter.
-                We know we want to eventually compile a HelloWorld example, but
-                we don't know what we need to do that.
-                Remember that BitBake utilizes three types of metadata files:
-                Configuration Files, Classes, and Recipes.
-                But where do they go, how does BitBake find them, etc. etc.?
-                Hopefully we can use BitBake's error messaging to figure this
-                out and better understand exactly what's going on.
-            </para>
-
-            <para>
-                First, let's begin by setting up a directory for our HelloWorld
-                project.
-                I'll do this in my home directory and change into that
-                directory:
-                <literallayout class='monospaced'>
-     $ mkdir ~/dev/hello &amp;&amp; cd ~/dev/hello
-                </literallayout>
-                Within this new, empty directory, let's run BitBake with
-                Debugging output and see what happens:
-                <literallayout class='monospaced'>
-     $ bitbake -DDD
-     The BBPATH variable is not set
-     DEBUG: Removed the following variables from the environment:
-     GNOME_DESKTOP_SESSION_ID, LESSOPEN, WINDOWID,
-     GNOME_KEYRING_CONTROL, DISPLAY, SSH_AGENT_PID, LANG,
-     XDG_SESSION_PATH, XAUTHORITY, LANGUAGE, SESSION_MANAGER,
-     SHLVL, MANDATORY_PATH, COMPIZ_CONFIG_PROFILE, TEXTDOMAIN,
-     GPG_AGENT_INFO, SSH_AUTH_SOCK, XDG_RUNTIME_DIR,
-     COMPIZ_BIN_PATH, GDMSESSION, DEFAULTS_PATH, TEXTDOMAINDIR,
-     XDG_SEAT_PATH, XDG_CONFIG_DIRS, XDG_CURRENT_DESKTOP,
-     DBUS_SESSION_BUS_ADDRESS, _, XDG_SESSION_COOKIE,
-     DESKTOP_SESSION, LESSCLOSE, GNOME_KEYRING_PID,
-     UBUNTU_MENUPROXY, OLDPWD, GTK_MODULES, XDG_DATA_DIRS,
-     COLORTERM, LS_COLORS
-                </literallayout>
-                The majority of this output is specific to environment variables
-                that are not directly relevant to BitBake.
-                However, the very
-                first message <filename>The BBPATH variable is not set</filename>
-                is and needs to be rectified.
-                So how do we set the BBPATH
-                variable?
-            </para>
-
-            <para>
-                When BitBake is run it begins looking for metadata files.
-                The BBPATH variable is what tells BitBake where to look.
-                It is possible to set BBPATH as an environment variable as you
-                did above for the BitBake exexcutable's PATH.
-                However, it's much more flexible to set the BBPATH variable for
-                each project, as this allows for greater flexibility.
-            </para>
-
-            <para>
-                Without BBPATH Bitbake will not find any <filename>.conf</filename>
-                files or recipe files at all.
-                It will also not find <filename>bitbake.conf</filename>.
-                Note the reference to <filename>conf/</filename>.
-                It is standard practice to organize the project's directory tree
-                to include a <filename>conf/</filename> and a
-                <filename>classes/</filename> directory.
-                Add those now to your project directory:
-                <literallayout class='monospaced'>
-     $ mkdir conf classes
-                </literallayout>
-                Now let's copy the sample configuration files provided in the
-                BitBake source tree to their appropriate conf and classes
-                directory.
-                Change to the BitBake source tree directory and:
-                <literallayout class='monospaced'>
-     cp conf/bitbake.conf ~/dev/hello/conf/
-     cp classes/base.bbclass ~/dev/hello/classes/
-                </literallayout>
-                At this point your project directory structure should look like
-                the following:
-               <literallayout class='monospaced'>
-     ~/dev/hello$ tree
-     .
-     ├── classes
-     │   └── base.bbclass
-     └── conf
-     └── bitbake.conf
-                </literallayout>
-            </para>
-
-            <para>
-                But what about BBPATH, we still haven't set it?
-            </para>
-
-            <para>
-                The first configuration file that BitBake looks for is always
-                <filename>bblayers.conf</filename>.
-                With this knowledge we know that to resolve our BBPATH error we
-                can add a <filename>conf/bblayers.conf</filename> file to our
-                project source tree and populate it with the BBPATH variable
-                declaration.
-                From your project source tree:
-                <literallayout class='monospaced'>
-     $ vim conf/bblayers.conf
-                </literallayout>
-                Add the following to the empty bblayers.conf file:
-                <literallayout class='monospaced'>
-     BBPATH := "${TOPDIR}"
-                </literallayout>
-            </para>
-
-            <para>
-                Now from the root of our project directory, let's run BitBake
-                again and see what happens:
-                <literallayout class='monospaced'>
-     $ bitbake -DDD
-     Nothing to do.  Use 'bitbake world' to build everything, or run
-     'bitbake --help' for usage information.
-     DEBUG: Removed the following variables from the environment:
-     GNOME_DESKTOP_SESSION_ID, LESSOPEN, WINDOWID,
-     GNOME_KEYRING_CONTROL, DISPLAY, SSH_AGENT_PID, LANG,
-     XDG_SESSION_PATH, XAUTHORITY, LANGUAGE, SESSION_MANAGER,
-     SHLVL, MANDATORY_PATH, COMPIZ_CONFIG_PROFILE, TEXTDOMAIN,
-     GPG_AGENT_INFO, SSH_AUTH_SOCK, XDG_RUNTIME_DIR,
-     COMPIZ_BIN_PATH, GDMSESSION, DEFAULTS_PATH, TEXTDOMAINDIR,
-     XDG_SEAT_PATH, XDG_CONFIG_DIRS, XDG_CURRENT_DESKTOP,
-     DBUS_SESSION_BUS_ADDRESS, _, XDG_SESSION_COOKIE,
-     DESKTOP_SESSION, LESSCLOSE, GNOME_KEYRING_PID, UBUNTU_MENUPROXY,
-     OLDPWD, GTK_MODULES, XDG_DATA_DIRS, COLORTERM, LS_COLORS
-     DEBUG: Found bblayers.conf (/home/wmat/dev/hello/conf/
-     bblayers.conf)
-     DEBUG: LOAD /home/wmat/dev/hello/conf/bblayers.conf
-     DEBUG: LOAD /home/wmat/dev/hello/conf/bitbake.conf
-     DEBUG: BB configuration INHERITs:0: inheriting /home/wmat/dev/
-     hello/classes/base.bbclass
-     DEBUG: BB /home/wmat/dev/hello/classes/base.bbclass: handle
-     (data, include)
-     DEBUG: LOAD /home/wmat/dev/hello/classes/base.bbclass
-     DEBUG: Clearing SRCREV cache due to cache policy of: clear
-     DEBUG: Using cache in '/home/wmat/dev/hello/tmp/cache/
-     local_file_checksum_cache.dat'
-     DEBUG: Using cache in '/home/wmat/dev/hello/tmp/cache/
-     bb_codeparser.dat'
-                </literallayout>
-                <note>
-                    From this point forward, the environment variable
-                    removal messages will be ignored and omitted.
-                    Let's examine the relevant DEBUG messages:
-                </note>
-            </para>
-        </section>
-    </section>
-</chapter>

bitbake/doc/user-manual/user-manual-intro.xml

@@ -1,316 +0,0 @@
-<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
-    "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
-
-<chapter id="user-manual-intro">
-    <title>Overview</title>
-
-    <section id="intro">
-        <title>Introduction</title>
-
-        <para>
-            fundamentally, BitBake is a generic task execution
-            engine that allows shell and Python tasks to be run
-            efficiently and in parallel while working within
-            complex inter-task dependency constraints.
-            One of BitBake's main users, OpenEmbedded, takes this core
-            and builds embedded Linux software stacks using
-            a task-oriented approach.
-        </para>
-
-        <para>
-            Conceptually, BitBake is similar to GNU Make in
-            some regards but has significant differences:
-            <itemizedlist>
-                <listitem><para>
-                    BitBake executes tasks according to provided
-                    metadata that builds up the tasks.
-                    Metadata is stored in recipe (<filename>.bb</filename>),
-                    configuration (<filename>.conf</filename>), and class
-                    (<filename>.bbclass</filename>) files and provides
-                    BitBake with instructions on what tasks to run and
-                    the dependencies between those tasks.
-                    </para></listitem>
-                <listitem><para>
-                    BitBake includes a fetcher library for obtaining source
-                    code from various places such as source control
-                    systems or websites.
-                    </para></listitem>
-                <listitem><para>
-                    The instructions for each unit to be built (e.g. a piece
-                    of software) are known as recipe files and
-                    contain all the information about the unit
-                    (dependencies, source file locations, checksums, description
-                    and so on).
-                    </para></listitem>
-                <listitem><para>
-                    BitBake includes a client/server abstraction and can
-                    be used from a command line or used as a service over XMLRPC and
-                    has several different user interfaces.
-                    </para></listitem>
-            </itemizedlist>
-        </para>
-    </section>
-
-    <section id="history-and-goals">
-        <title>History and Goals</title>
-
-        <para>
-            BitBake was originally a part of the OpenEmbedded project.
-            It was inspired by the Portage package management system
-            used by the Gentoo Linux distribution.
-            On December 7, 2004, OpenEmbedded project team member,
-            Chris Larson split the project into two distinct pieces:
-            <itemizedlist>
-                <listitem><para>BitBake, a generic task executor</para></listitem>
-                <listitem><para>OpenEmbedded, a metadata set utilized by
-                    BitBake</para></listitem>
-            </itemizedlist>
-            Today, BitBake is the primary basis of the
-            <ulink url="http://www.openembedded.org/">OpenEmbedded</ulink>
-            project, which is being used to build and maintain a
-            number of projects and embedded Linux distributions
-            such as the Angstrom Distribution and the Yocto
-            Project.
-        </para>
-
-        <para>
-            Prior to BitBake, no other build tool adequately met the needs of
-            an aspiring embedded Linux distribution.
-            All of the build systems used by traditional desktop Linux
-            distributions lacked important functionality, and none of the
-            ad-hoc buildroot systems, prevalent in the
-            embedded space, were scalable or maintainable.
-        </para>
-
-        <para>
-            Some important original goals for BitBake were:
-            <itemizedlist>
-                <listitem><para>
-                    Handle cross-compilation.
-                    </para></listitem>
-                <listitem><para>
-                    Handle inter-package dependencies (build time on
-                    target architecture, build time on native
-                    architecture, and runtime).
-                    </para></listitem>
-                <listitem><para>
-                    Support running any number of tasks within a given
-                    package, including, but not limited to, fetching
-                    upstream sources, unpacking them, patching them,
-                    configuring them, and so forth.
-                    </para></listitem>
-                <listitem><para>
-                    Be Linux distribution agnostic for both build and
-                    target systems.
-                    </para></listitem>
-                <listitem><para>
-                    Be architecture agnostic.
-                    </para></listitem>
-                <listitem><para>
-                    Support multiple build and target operating systems
-                    (e.g. Cygwin, the BSDs, and so forth).
-                    </para></listitem>
-                <listitem><para>
-                    Be self contained, rather than tightly
-                    integrated into the build machine's root
-                    filesystem.
-                    </para></listitem>
-                <listitem><para>
-                    Handle conditional metadata on the target architecture,
-                    operating system, distribution, and machine.
-                    </para></listitem>
-                <listitem><para>
-                    Be easy to use the tools to supply local metadata and packages
-                    against which to operate.
-                    </para></listitem>
-                <listitem><para>
-                    Be easy to use BitBake to collaborate between multiple
-                    projects for their builds.
-                    </para></listitem>
-                <listitem><para>
-                    Provide an inheritance mechanism that share
-                    common metadata between many packages.
-                    </para></listitem>
-            </itemizedlist>
-            Over time it became apparent that some further requirements
-            were necessary:
-            <itemizedlist>
-                <listitem><para>
-                    Handle variants of a base recipe (e.g. native, sdk,
-                    and multilib).
-                    </para></listitem>
-                <listitem><para>
-                    Split metadata into layers and allow layers
-                    to override each other.
-                    </para></listitem>
-                <listitem><para>
-                    Allow representation of a given set of input variables
-                    to a task as a checksum.
-                    Based on that checksum, allow acceleration of builds
-                    with prebuilt components.
-                    </para></listitem>
-            </itemizedlist>
-            BitBake satisfies all the original requirements and many more
-            with extensions being made to the basic functionality to
-            reflect the additional requirements.
-            Flexibility and power have always been the priorities.
-            BitBake is highly extensible and supports embedded Python code and
-            execution of any arbitrary tasks.
-        </para>
-    </section>
-
-    <section id="Concepts">
-        <title>Concepts</title>
-
-        <para>
-            BitBake is a program written in the Python language.
-            At the highest level, BitBake interprets metadata, decides
-            what tasks are required to run, and executes those tasks.
-            Similar to GNU Make, BitBake controls how software is
-            built.
-            GNU Make achieves its control through "makefiles".
-            BitBake uses "recipes".
-        </para>
-
-        <para>
-            BitBake extends the capabilities of a simple
-            tool like GNU Make by allowing for much more complex tasks
-            to be completed, such as assembling entire embedded Linux
-            distributions.
-        </para>
-
-        <para>
-            The remainder of this section introduces several concepts
-            that should be understood in order to better leverage
-            the power of BitBake.
-        </para>
-
-        <section id='recipes'>
-            <title>Recipes</title>
-
-            <para>
-                BitBake Recipes, which are denoted by the file extension
-                <filename>.bb</filename>, are the most basic metadata files.
-                These recipe files provide BitBake the following:
-                <itemizedlist>
-                    <listitem><para>Descriptive information about the package</para></listitem>
-                    <listitem><para>The version of the recipe</para></listitem>
-                    <listitem><para>When dependencies exist</para></listitem>
-                    <listitem><para>Where the source code resides</para></listitem>
-                    <listitem><para>Whether the source code requires any patches</para></listitem>
-                    <listitem><para>How to compile the source code</para></listitem>
-                    <listitem><para>Where on the target machine to install the
-                        package being compiled</para></listitem>
-                </itemizedlist>
-            </para>
-
-            <para>
-                Within the context of BitBake, or any project utilizing BitBake
-                as it's build system, files with the <filename>.bb</filename>
-                extension are referred to as recipes.
-                <note>
-                    The term "package" is also commonly used to describe recipes.
-                    However, since the same word is used to describe packaged
-                    output from a project, it is best to maintain a single
-                    descriptive term, "recipes".
-                </note>
-            </para>
-        </section>
-
-        <section id='configuration-files'>
-            <title>Configuration Files</title>
-
-            <para>
-                Configuration files, which are denoted by the
-                <filename>.conf</filename> extension, define
-                various configuration variables that govern the project's build
-                process.
-                These files fall into several areas that define
-                machine configuration options, distribution configuration
-                options, compiler tuning options, general common
-                configuration options, and user configuration options.
-                The main configuration file is the sample
-                <filename>bitbake.conf</filename> file, which is
-                located within the BitBake source tree
-                <filename>conf</filename> directory.
-            </para>
-        </section>
-
-        <section id='classes'>
-            <title>Classes</title>
-
-            <para>
-                Class files, which are denoted by the
-                <filename>.bbclass</filename> extension, contain
-                information that is useful to share between metadata files.
-                The BitBake source tree currently comes with one class metadata file
-                called <filename>base.bbclass</filename>.
-                You can find this file in the
-                <filename>classes</filename> directory.
-                The <filename>base.bbclass</filename> is special in that any
-                new classes that a developer adds to a project are required to
-                inherit <filename>base.bbclass</filename> automatically.
-                This class contains definitions for standard basic tasks such
-                as fetching, unpacking, configuring (empty by default),
-                compiling (runs any Makefile present), installing (empty by
-                default) and packaging (empty by default).
-                These tasks are often overridden or extended by other classes
-                added during the project development process.
-            </para>
-        </section>
-    </section>
-
-    <section id='obtaining-bitbake'>
-        <title>Obtaining BitBake</title>
-
-        <para>
-            You can obtain BitBake several different ways:
-            <itemizedlist>
-                <listitem><para><emphasis>Installation using your Distribution
-                    Package Management System:</emphasis>
-                    This method is not
-                    recommended because the BitBake version, in most
-                    cases provided by your distribution, is several
-                    releases behind a snapshot of the BitBake repository.
-                    </para></listitem>
-                <listitem><para><emphasis>Taking a snapshot of BitBake:</emphasis>
-                    Downloading a snapshot of BitBake from the
-                    source code repository is the recommended method
-                    as you are assured of having the most recent stable
-                    BitBake release.</para>
-                    <para>The following example downloads a snapshot of
-                    BitBake version 1.17.0:
-                    <literallayout class='monospaced'>
-     $ wget http://git.openembedded.org/bitbake/snapshot/bitbake-1.17.0.tar.gz
-     $ tar zxpvf bitbake-1.17.0.tar.gz
-                    </literallayout>
-                    After extraction of the tarball using the tar utility,
-                    you have a directory entitled
-                    <filename>bitbake-1.17.0</filename>.
-                    </para></listitem>
-                <listitem><para><emphasis>Cloning BitBake:</emphasis>
-                    Using Git to clone the BitBake source code repository
-                    is also a recommended method when you need the absolute latest
-                    BitBake source.
-                    Realize that using this method could expose you to areas of
-                    BitBake that are under development.</para>
-                    <para>Here is an example:
-                    <literallayout class='monospaced'>
-     $ git clone git://git.openembedded.org/bitbake
-                    </literallayout>
-                    This command clones the BitBake Git repository into a
-                    directory called <filename>bitbake</filename>.
-                    Alternatively, you can
-                    designate a directory after the
-                    <filename>git clone</filename> command
-                    if you want to call the new directory something
-                    other than <filename>bitbake</filename>.
-                    Here is an example that names the directory
-                    <filename>bbdev</filename>:
-                    <literallayout class='monospaced'>
-     $ git clone git://git.openembedded.org/bitbake bbdev
-                    </literallayout></para></listitem>
-            </itemizedlist>
-        </para>
-    </section>
-</chapter>

bitbake/lib/bb/__init__.py

@@ -21,7 +21,7 @@
 # with this program; if not, write to the Free Software Foundation, Inc.,
 # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 
-__version__ = "1.21.1"
+__version__ = "1.22.0"
 
 import sys
 if sys.version_info < (2, 7, 3):

bitbake/lib/bb/build.py

@@ -30,6 +30,7 @@ import sys
 import logging
 import shlex
 import glob
+import time
 import bb
 import bb.msg
 import bb.process
@@ -75,6 +76,7 @@ class TaskBase(event.Event):
         self.taskfile = d.getVar("FILE", True)
         self.taskname = self._task
         self.logfile = logfile
+        self.time = time.time()
         event.Event.__init__(self)
         self._message = "recipe %s: task %s: %s" % (d.getVar("PF", True), t, self.getDisplayName())
 
@@ -173,7 +175,7 @@ def exec_func(func, d, dirs = None):
 
     lockflag = flags.get('lockfiles')
     if lockflag:
-        lockfiles = [d.expand(f) for f in lockflag.split()]
+        lockfiles = [f for f in d.expand(lockflag).split()]
     else:
         lockfiles = None
 

bitbake/lib/bb/cache.py

@@ -527,7 +527,7 @@ class Cache(object):
         if hasattr(info_array[0], 'file_checksums'):
             for _, fl in info_array[0].file_checksums.items():
                 for f in fl.split():
-                    if not os.path.exists(f):
+                    if not ('*' in f or os.path.exists(f)):
                         logger.debug(2, "Cache: %s's file checksum list file %s was removed",
                                         fn, f)
                         self.remove(fn)

bitbake/lib/bb/codeparser.py

@@ -35,7 +35,7 @@ def check_indent(codestr):
 
 class CodeParserCache(MultiProcessCache):
     cache_file_name = "bb_codeparser.dat"
-    CACHE_VERSION = 4
+    CACHE_VERSION = 6
 
     def __init__(self):
         MultiProcessCache.__init__(self)
@@ -102,7 +102,7 @@ class BufferedLogger(Logger):
         self.buffer = []
 
 class PythonParser():
-    getvars = ("d.getVar", "bb.data.getVar", "data.getVar", "d.appendVar", "d.prependVar")
+    getvars = (".getVar", ".appendVar", ".prependVar")
     containsfuncs = ("bb.utils.contains", "base_contains", "oe.utils.contains")
     execfuncs = ("bb.build.exec_func", "bb.build.exec_task")
 
@@ -122,7 +122,7 @@ class PythonParser():
 
     def visit_Call(self, node):
         name = self.called_node_name(node.func)
-        if name in self.getvars or name in self.containsfuncs:
+        if name and name.endswith(self.getvars) or name in self.containsfuncs:
             if isinstance(node.args[0], ast.Str):
                 varname = node.args[0].s
                 if name in self.containsfuncs and isinstance(node.args[1], ast.Str):
@@ -186,7 +186,7 @@ class PythonParser():
             if n.__class__.__name__ == "Call":
                 self.visit_Call(n)
 
-        self.references.update(self.var_execs)
+        self.execs.update(self.var_execs)
 
         codeparsercache.pythoncacheextras[h] = {}
         codeparsercache.pythoncacheextras[h]["refs"] = self.references
@@ -217,6 +217,15 @@ class ShellParser():
             self.execs = codeparsercache.shellcacheextras[h]["execs"]
             return self.execs
 
+        self._parse_shell(value)
+        self.execs = set(cmd for cmd in self.allexecs if cmd not in self.funcdefs)
+
+        codeparsercache.shellcacheextras[h] = {}
+        codeparsercache.shellcacheextras[h]["execs"] = self.execs
+
+        return self.execs
+
+    def _parse_shell(self, value):
         try:
             tokens, _ = pyshyacc.parse(value, eof=True, debug=False)
         except pyshlex.NeedMore:
@@ -224,12 +233,6 @@ class ShellParser():
 
         for token in tokens:
             self.process_tokens(token)
-        self.execs = set(cmd for cmd in self.allexecs if cmd not in self.funcdefs)
-
-        codeparsercache.shellcacheextras[h] = {}
-        codeparsercache.shellcacheextras[h]["execs"] = self.execs
-
-        return self.execs
 
     def process_tokens(self, tokens):
         """Process a supplied portion of the syntax tree as returned by
@@ -303,7 +306,7 @@ class ShellParser():
 
                 if part[0] in ('`', '$('):
                     command = pyshlex.wordtree_as_string(part[1:-1])
-                    self.parse_shell(command)
+                    self._parse_shell(command)
 
                     if word[0] in ("cmd_name", "cmd_word"):
                         if word in words:
@@ -322,7 +325,7 @@ class ShellParser():
                     self.log.debug(1, self.unhandled_template % cmd)
                 elif cmd == "eval":
                     command = " ".join(word for _, word in words[1:])
-                    self.parse_shell(command)
+                    self._parse_shell(command)
                 else:
                     self.allexecs.add(cmd)
                 break

bitbake/lib/bb/command.py

@@ -257,6 +257,17 @@ class CommandsSync:
         mask = params[3]
         return bb.event.set_UIHmask(handlerNum, llevel, debug_domains, mask)
 
+    def setFeatures(self, command, params):
+        """
+        Set the cooker features to include the passed list of features
+        """
+        features = params[0]
+        command.cooker.setFeatures(features)
+
+    # although we change the internal state of the cooker, this is transparent since
+    # we always take and leave the cooker in state.initial
+    setFeatures.readonly = True
+
 class CommandsAsync:
     """
     A class of asynchronous commands

bitbake/lib/bb/cooker.py

@@ -37,6 +37,7 @@ from collections import defaultdict
 import bb, bb.exceptions, bb.command
 from bb import utils, data, parse, event, cache, providers, taskdata, runqueue
 import Queue
+import signal
 import prserv.serv
 
 logger      = logging.getLogger("BitBake")
@@ -81,7 +82,7 @@ class SkippedPackage:
 
 
 class CookerFeatures(object):
-    _feature_list = [HOB_EXTRA_CACHES, SEND_DEPENDS_TREE, BASEDATASTORE_TRACKING] = range(3)
+    _feature_list = [HOB_EXTRA_CACHES, SEND_DEPENDS_TREE, BASEDATASTORE_TRACKING, SEND_SANITYEVENTS] = range(4)
 
     def __init__(self):
         self._features=set()
@@ -110,10 +111,12 @@ class BBCooker:
     Manages one bitbake build run
     """
 
-    def __init__(self, configuration):
+    def __init__(self, configuration, featureSet = []):
         self.recipecache = None
         self.skiplist = {}
         self.featureset = CookerFeatures()
+        for f in featureSet:
+            self.featureset.setFeature(f)
 
         self.configuration = configuration
 
@@ -149,6 +152,23 @@ class BBCooker:
 
         self.parser = None
 
+        signal.signal(signal.SIGTERM, self.sigterm_exception)
+
+    def sigterm_exception(self, signum, stackframe):
+        bb.warn("Cooker recieved SIGTERM, shutting down...")
+        self.state = state.forceshutdown
+
+    def setFeatures(self, features):
+        # we only accept a new feature set if we're in state initial, so we can reset without problems
+        if self.state != state.initial:
+            raise Exception("Illegal state for feature set change")
+        original_featureset = list(self.featureset)
+        for feature in features:
+            self.featureset.setFeature(feature)
+        bb.debug(1, "Features set %s (was %s)" % (original_featureset, list(self.featureset)))
+        if (original_featureset != list(self.featureset)):
+            self.reset()
+
     def initConfigurationData(self):
 
         self.state = state.initial
@@ -192,11 +212,13 @@ class BBCooker:
 
     def enableDataTracking(self):
         self.configuration.tracking = True
-        self.data.enableTracking()
+        if hasattr(self, "data"):
+            self.data.enableTracking()
 
     def disableDataTracking(self):
         self.configuration.tracking = False
-        self.data.disableTracking()
+        if hasattr(self, "data"):
+            self.data.disableTracking()
 
     def modifyConfigurationVar(self, var, val, default_file, op):
         if op == "append":
@@ -319,6 +341,8 @@ class BBCooker:
                         contents[begin_line] = "\n"
                     #remove var from history
                     self.data.varhistory.del_var_history(var, conf_file, line)
+                    #remove variable
+                    self.data.delVar(var)
 
                 with open(conf_file, 'w') as f:
                     f.writelines(contents)
@@ -1204,6 +1228,7 @@ class BBCooker:
         '''
         Create a new image with a "require"/"inherit" base_image statement
         '''
+        import re
         if timestamp:
             image_name = os.path.splitext(image)[0]
             timestr = time.strftime("-%Y%m%d-%H%M%S")
@@ -1214,13 +1239,18 @@ class BBCooker:
             else:
                 dest = image
 
+        basename = False
         if base_image:
             with open(base_image, 'r') as f:
                 require_line = f.readline()
+                p = re.compile("IMAGE_BASENAME *=")
+                for line in f:
+                    if p.search(line):
+                        basename = True
 
         with open(dest, "w") as imagefile:
             if base_image is None:
-                imagefile.write("inherit image\n")
+                imagefile.write("inherit core-image\n")
             else:
                 topdir = self.data.getVar("TOPDIR")
                 if topdir in base_image:
@@ -1235,6 +1265,11 @@ class BBCooker:
             description_var = "DESCRIPTION = \"" + description + "\"\n"
             imagefile.write(description_var)
 
+            if basename:
+                # If this is overwritten in a inherited image, reset it to default
+                image_basename = "IMAGE_BASENAME = \"${PN}\"\n"
+                imagefile.write(image_basename)
+
         self.state = state.initial
         if timestamp:
             return timestr
@@ -1251,6 +1286,8 @@ class BBCooker:
 
         if self.state != state.parsing:
             self.parseConfiguration ()
+            if CookerFeatures.SEND_SANITYEVENTS in self.featureset:
+                bb.event.fire(bb.event.SanityCheck(False), self.data)
 
             ignore = self.data.getVar("ASSUME_PROVIDED", True) or ""
             self.recipecache.ignored_dependencies = set(ignore.split())
@@ -1371,6 +1408,7 @@ class CookerExit(bb.event.Event):
 class CookerCollectFiles(object):
     def __init__(self, priorities):
         self.appendlist = {}
+        self.bbappends = []
         self.appliedappendlist = []
         self.bbfile_config_priorities = priorities
 
@@ -1465,6 +1503,7 @@ class CookerCollectFiles(object):
         # Build a list of .bbappend files for each .bb file
         for f in bbappend:
             base = os.path.basename(f).replace('.bbappend', '.bb')
+            self.bbappends.append((base, f))
             if not base in self.appendlist:
                self.appendlist[base] = []
             if f not in self.appendlist[base]:
@@ -1490,11 +1529,11 @@ class CookerCollectFiles(object):
         """
         filelist = []
         f = os.path.basename(fn)
-        for bbappend in self.appendlist:
+        for b in self.bbappends:
+            (bbappend, filename) = b
             if (bbappend == f) or ('%' in bbappend and bbappend.startswith(f[:bbappend.index('%')])):
                 self.appliedappendlist.append(bbappend)
-                for filename in self.appendlist[bbappend]:
-                    filelist.append(filename)
+                filelist.append(filename)
         return filelist
 
     def collection_priorities(self, pkgfns):
@@ -1514,10 +1553,10 @@ class CookerCollectFiles(object):
                 unmatched.add(regex)
 
         def findmatch(regex):
-            for bbfile in self.appendlist:
-                for append in self.appendlist[bbfile]:
-                    if regex.match(append):
-                        return True
+            for b in self.bbappends:
+                (bbfile, append) = b
+                if regex.match(append):
+                    return True
             return False
 
         for unmatch in unmatched.copy():

bitbake/lib/bb/cookerdata.py

@@ -124,7 +124,7 @@ class CookerConfiguration(object):
         self.profile = False
         self.nosetscene = False
         self.invalidate_stamp = False
-        self.dump_signatures = False
+        self.dump_signatures = []
         self.dry_run = False
         self.tracking = False
         self.interface = []

bitbake/lib/bb/data.py

@@ -231,6 +231,7 @@ def emit_var(var, o=sys.__stdout__, d = init(), all=False):
     # to a shell, we need to escape the quotes in the var
     alter = re.sub('"', '\\"', val)
     alter = re.sub('\n', ' \\\n', alter)
+    alter = re.sub('\\$', '\\\\$', alter)
     o.write('%s="%s"\n' % (varExpanded, alter))
     return 0
 
@@ -295,7 +296,7 @@ def build_dependencies(key, keys, shelldeps, varflagsexcl, d):
             deps |= parser.references
             deps = deps | (keys & parser.execs)
             return deps, value
-        varflags = d.getVarFlags(key, ["vardeps", "vardepvalue", "vardepsexclude", "postfuncs", "prefuncs"]) or {}
+        varflags = d.getVarFlags(key, ["vardeps", "vardepvalue", "vardepsexclude", "vardepvalueexclude", "postfuncs", "prefuncs"]) or {}
         vardeps = varflags.get("vardeps")
         value = d.getVar(key, False)
 
@@ -345,6 +346,12 @@ def build_dependencies(key, keys, shelldeps, varflagsexcl, d):
             deps = deps | (keys & parser.execs)
             value = handle_contains(value, parser.contains, d)
 
+        if "vardepvalueexclude" in varflags:
+            exclude = varflags.get("vardepvalueexclude")
+            for excl in exclude.split('|'):
+                if excl:
+                    value = value.replace(excl, '')
+
         # Add varflags, assuming an exclusion list is set
         if varflagsexcl:
             varfdeps = []

bitbake/lib/bb/data_smart.py

@@ -610,10 +610,14 @@ class DataSmart(MutableMapping):
             else:
                 cachename = var + "[" + flag + "]"
             value = self.expand(value, cachename)
-        if value is not None and flag == "_content" and local_var is not None and "_removeactive" in local_var:
+        if value and flag == "_content" and local_var is not None and "_removeactive" in local_var:
             filtered = filter(lambda v: v not in local_var["_removeactive"],
                               value.split(" "))
             value = " ".join(filtered)
+            if expand:
+                 # We need to ensure the expand cache has the correct value
+                 # flag == "_content" here
+                self.expand_cache[var].value = value
         return value
 
     def delVarFlag(self, var, flag, **loginfo):

bitbake/lib/bb/event.py

@@ -601,8 +601,11 @@ class MetadataEvent(Event):
 
 class SanityCheck(Event):
     """
-    Event to issue sanity check
+    Event to runs sanity checks, either raise errors or generate events as return status.
     """
+    def __init__(self, generateevents = True):
+        Event.__init__(self)
+        self.generateevents = generateevents
 
 class SanityCheckPassed(Event):
     """
@@ -620,8 +623,11 @@ class SanityCheckFailed(Event):
 
 class NetworkTest(Event):
     """
-    Event to start network test
+    Event to run network connectivity tests, either raise errors or generate events as return status.
     """
+    def __init__(self, generateevents = True):
+        Event.__init__(self)
+        self.generateevents = generateevents
 
 class NetworkTestPassed(Event):
     """

bitbake/lib/bb/fetch2/__init__.py

@@ -33,9 +33,6 @@ import glob
 import logging
 import urllib
 import urlparse
-if 'git' not in urlparse.uses_netloc:
-    urlparse.uses_netloc.append('git')
-from urlparse import urlparse
 import operator
 import bb.persist_data, bb.utils
 import bb.checksum
@@ -165,6 +162,7 @@ class URI(object):
       * path_quoted (read/write)
         A URI quoted version of path
       * params (dict) (read/write)
+      * query (dict) (read/write)
       * relative (bool) (read only)
         True if this is a "relative URI", (e.g. file:foo.diff)
 
@@ -204,18 +202,35 @@ class URI(object):
         self.port = None
         self._path = ''
         self.params = {}
+        self.query = {}
         self.relative = False
 
         if not uri:
             return
 
-        urlp = urlparse(uri)
+        # We hijack the URL parameters, since the way bitbake uses
+        # them are not quite RFC compliant.
+        uri, param_str = (uri.split(";", 1) + [None])[:2]
+
+        urlp = urlparse.urlparse(uri)
         self.scheme = urlp.scheme
 
-        # Convert URI to be relative
+        reparse = 0
+
+        # Coerce urlparse to make URI scheme use netloc
+        if not self.scheme in urlparse.uses_netloc:
+            urlparse.uses_params.append(self.scheme)
+            reparse = 1
+
+        # Make urlparse happy(/ier) by converting local resources
+        # to RFC compliant URL format. E.g.:
+        #   file://foo.diff -> file:foo.diff
         if urlp.scheme in self._netloc_forbidden:
             uri = re.sub("(?<=:)//(?!/)", "", uri, 1)
-            urlp = urlparse(uri)
+            reparse = 1
+
+        if reparse:
+            urlp = urlparse.urlparse(uri)
 
         # Identify if the URI is relative or not
         if urlp.scheme in self._relative_schemes and \
@@ -231,49 +246,45 @@ class URI(object):
             if urlp.password:
                 self.userinfo += ':%s' % urlp.password
 
-        # Do support params even for URI schemes that Python's
-        # urlparse doesn't support params for.
-        path = ''
-        param_str = ''
-        if not urlp.params:
-            path, param_str = (list(urlp.path.split(";", 1)) + [None])[:2]
-        else:
-            path = urlp.path
-            param_str = urlp.params
-
-        self.path = urllib.unquote(path)
+        self.path = urllib.unquote(urlp.path)
 
         if param_str:
-            self.params = self._param_dict(param_str)
+            self.params = self._param_str_split(param_str, ";")
+        if urlp.query:
+            self.query = self._param_str_split(urlp.query, "&")
 
     def __str__(self):
         userinfo = self.userinfo
         if userinfo:
             userinfo += '@'
 
-        return "%s:%s%s%s%s%s" % (
+        return "%s:%s%s%s%s%s%s" % (
             self.scheme,
             '' if self.relative else '//',
             userinfo,
             self.hostport,
             self.path_quoted,
-            self._param_str)
+            self._query_str(),
+            self._param_str())
 
-    @property
     def _param_str(self):
-        ret = ''
-        for key, val in self.params.items():
-            ret += ";%s=%s" % (key, val)
+        return (
+            ''.join([';', self._param_str_join(self.params, ";")])
+            if self.params else '')
+
+    def _query_str(self):
+        return (
+            ''.join(['?', self._param_str_join(self.query, "&")])
+            if self.query else '')
+
+    def _param_str_split(self, string, elmdelim, kvdelim="="):
+        ret = {}
+        for k, v in [x.split(kvdelim, 1) for x in string.split(elmdelim)]:
+            ret[k] = v
         return ret
 
-    def _param_dict(self, param_str):
-        parm = {}
-
-        for keyval in param_str.split(";"):
-            key, val = keyval.split("=", 1)
-            parm[key] = val
-
-        return parm
+    def _param_str_join(self, dict_, elmdelim, kvdelim="="):
+        return elmdelim.join([kvdelim.join([k, v]) for k, v in dict_.items()])
 
     @property
     def hostport(self):
@@ -310,9 +321,10 @@ class URI(object):
 
     @username.setter
     def username(self, username):
+        password = self.password
         self.userinfo = username
-        if self.password:
-            self.userinfo += ":%s" % self.password
+        if password:
+            self.userinfo += ":%s" % password
 
     @property
     def password(self):
@@ -808,7 +820,7 @@ def try_mirror_url(origud, ud, ld, check = False):
                 os.symlink(ud.localpath, dest)
             if not os.path.exists(origud.donestamp) or origud.method.need_update(origud, ld):
                 origud.method.download(origud, ld)
-                if hasattr(ud.method,"build_mirror_data"):
+                if hasattr(origud.method,"build_mirror_data"):
                     origud.method.build_mirror_data(origud, ld)
             return ud.localpath
         # Otherwise the result is a local file:// and we symlink to it
@@ -920,13 +932,15 @@ def get_checksum_file_list(d):
         if ud and isinstance(ud.method, local.Local):
             ud.setup_localpath(d)
             f = ud.localpath
+            pth = ud.decodedurl
+            if '*' in pth:
+                f = os.path.join(os.path.abspath(f), pth)
             if f.startswith(dl_dir):
                 # The local fetcher's behaviour is to return a path under DL_DIR if it couldn't find the file anywhere else
                 if os.path.exists(f):
                     bb.warn("Getting checksum for %s SRC_URI entry %s: file not found except in DL_DIR" % (d.getVar('PN', True), os.path.basename(f)))
                 else:
                     bb.warn("Unable to get checksum for %s SRC_URI entry %s: file could not be found" % (d.getVar('PN', True), os.path.basename(f)))
-                    continue
             filelist.append(f)
 
     return " ".join(filelist)
@@ -948,23 +962,33 @@ def get_file_checksums(filelist, pn):
             return None
         return checksum
 
+    def checksum_dir(pth):
+        # Handle directories recursively
+        dirchecksums = []
+        for root, dirs, files in os.walk(pth):
+            for name in files:
+                fullpth = os.path.join(root, name)
+                checksum = checksum_file(fullpth)
+                if checksum:
+                    dirchecksums.append((fullpth, checksum))
+        return dirchecksums
+
     checksums = []
     for pth in filelist.split():
         checksum = None
         if '*' in pth:
             # Handle globs
             for f in glob.glob(pth):
-                checksum = checksum_file(f)
-                if checksum:
-                    checksums.append((f, checksum))
-        elif os.path.isdir(pth):
-            # Handle directories
-            for root, dirs, files in os.walk(pth):
-                for name in files:
-                    fullpth = os.path.join(root, name)
-                    checksum = checksum_file(fullpth)
+                if os.path.isdir(f):
+                    checksums.extend(checksum_dir(f))
+                else:
+                    checksum = checksum_file(f)
                     if checksum:
-                        checksums.append((fullpth, checksum))
+                        checksums.append((f, checksum))
+            continue
+        elif os.path.isdir(pth):
+            checksums.extend(checksum_dir(pth))
+            continue
         else:
             checksum = checksum_file(pth)
 
@@ -1231,7 +1255,7 @@ class FetchMethod(object):
                         destdir = destdir.strip('/')
                     if destdir != "." and not os.access("%s/%s" % (rootdir, destdir), os.F_OK):
                         os.makedirs("%s/%s" % (rootdir, destdir))
-                    cmd = 'cp -pPR %s %s/%s/' % (file, rootdir, destdir)
+                    cmd = 'cp -fpPR %s %s/%s/' % (file, rootdir, destdir)
                     #cmd = 'tar -cf - -C "%d" -ps . | tar -xf - -C "%s/%s/"' % (file, rootdir, destdir)
                 else:
                     # The "destdir" handling was specifically done for FILESPATH
@@ -1241,7 +1265,7 @@ class FetchMethod(object):
                     else:
                        destdir = "."
                     bb.utils.mkdirhier("%s/%s" % (rootdir, destdir))
-                    cmd = 'cp %s %s/%s/' % (file, rootdir, destdir)
+                    cmd = 'cp -f %s %s/%s/' % (file, rootdir, destdir)
 
         if not cmd:
             return
@@ -1527,7 +1551,6 @@ from . import gitannex
 from . import local
 from . import svn
 from . import wget
-from . import svk
 from . import ssh
 from . import sftp
 from . import perforce
@@ -1543,7 +1566,6 @@ methods.append(git.Git())
 methods.append(gitsm.GitSM())
 methods.append(gitannex.GitANNEX())
 methods.append(cvs.Cvs())
-methods.append(svk.Svk())
 methods.append(ssh.SSH())
 methods.append(sftp.SFTP())
 methods.append(perforce.Perforce())

bitbake/lib/bb/fetch2/git.py

@@ -245,7 +245,7 @@ class Git(FetchMethod):
         subdir = ud.parm.get("subpath", "")
         if subdir != "":
             readpathspec = ":%s" % (subdir)
-            def_destsuffix = "%s/" % os.path.basename(subdir)
+            def_destsuffix = "%s/" % os.path.basename(subdir.rstrip('/'))
         else:
             readpathspec = ""
             def_destsuffix = "git/"
@@ -317,22 +317,30 @@ class Git(FetchMethod):
         """
         return "git:" + ud.host + ud.path.replace('/', '.') + ud.unresolvedrev[name]
 
-    def _latest_revision(self, ud, d, name):
+    def _lsremote(self, ud, d, search):
         """
-        Compute the HEAD revision for the url
+        Run git ls-remote with the specified search string
         """
         if ud.user:
             username = ud.user + '@'
         else:
             username = ""
 
-        cmd = "%s ls-remote %s://%s%s%s refs/heads/%s refs/tags/%s^{}" % \
-              (ud.basecmd, ud.proto, username, ud.host, ud.path, ud.unresolvedrev[name], ud.unresolvedrev[name])
+        cmd = "%s ls-remote %s://%s%s%s %s" % \
+              (ud.basecmd, ud.proto, username, ud.host, ud.path, search)
         if ud.proto.lower() != 'file':
             bb.fetch2.check_network_access(d, cmd)
         output = runfetchcmd(cmd, d, True)
         if not output:
             raise bb.fetch2.FetchError("The command %s gave empty output unexpectedly" % cmd, ud.url)
+        return output
+
+    def _latest_revision(self, ud, d, name):
+        """
+        Compute the HEAD revision for the url
+        """
+        search = "refs/heads/%s refs/tags/%s^{}" % (ud.unresolvedrev[name], ud.unresolvedrev[name])
+        output = self._lsremote(ud, d, search)
         return output.split()[0]
 
     def _build_revision(self, ud, d, name):

bitbake/lib/bb/fetch2/gitsm.py

@@ -42,6 +42,53 @@ class GitSM(Git):
                 pass
         return False
 
+    def _set_relative_paths(self, repopath):
+        """
+        Fix submodule paths to be relative instead of absolute,
+        so that when we move the repo it doesn't break
+        (In Git 1.7.10+ this is done automatically)
+        """
+        submodules = []
+        with open(os.path.join(repopath, '.gitmodules'), 'r') as f:
+            for line in f.readlines():
+                if line.startswith('[submodule'):
+                    submodules.append(line.split('"')[1])
+
+        for module in submodules:
+            repo_conf = os.path.join(repopath, module, '.git')
+            if os.path.exists(repo_conf):
+                with open(repo_conf, 'r') as f:
+                    lines = f.readlines()
+                newpath = ''
+                for i, line in enumerate(lines):
+                    if line.startswith('gitdir:'):
+                        oldpath = line.split(': ')[-1].rstrip()
+                        if oldpath.startswith('/'):
+                            newpath = '../' * (module.count('/') + 1) + '.git/modules/' + module
+                            lines[i] = 'gitdir: %s\n' % newpath
+                            break
+                if newpath:
+                    with open(repo_conf, 'w') as f:
+                        for line in lines:
+                            f.write(line)
+
+            repo_conf2 = os.path.join(repopath, '.git', 'modules', module, 'config')
+            if os.path.exists(repo_conf2):
+                with open(repo_conf2, 'r') as f:
+                    lines = f.readlines()
+                newpath = ''
+                for i, line in enumerate(lines):
+                    if line.lstrip().startswith('worktree = '):
+                        oldpath = line.split(' = ')[-1].rstrip()
+                        if oldpath.startswith('/'):
+                            newpath = '../' * (module.count('/') + 3) + module
+                            lines[i] = '\tworktree = %s\n' % newpath
+                            break
+                if newpath:
+                    with open(repo_conf2, 'w') as f:
+                        for line in lines:
+                            f.write(line)
+
     def update_submodules(self, ud, d):
         # We have to convert bare -> full repo, do the submodule bit, then convert back
         tmpclonedir = ud.clonedir + ".tmp"
@@ -54,6 +101,7 @@ class GitSM(Git):
         runfetchcmd(ud.basecmd + " reset --hard", d)
         runfetchcmd(ud.basecmd + " submodule init", d)
         runfetchcmd(ud.basecmd + " submodule update", d)
+        self._set_relative_paths(tmpclonedir)
         runfetchcmd("sed " + gitdir + "/config -i -e 's/bare.*=.*false/bare = true/'", d)
         os.rename(gitdir, ud.clonedir,)
         bb.utils.remove(tmpclonedir, True)

bitbake/lib/bb/fetch2/hg.py

@@ -110,7 +110,10 @@ class Hg(FetchMethod):
             options.append("-r %s" % ud.revision)
 
         if command == "fetch":
-            cmd = "%s clone %s %s://%s/%s %s" % (basecmd, " ".join(options), proto, hgroot, ud.module, ud.module)
+            if ud.user and ud.pswd:
+                cmd = "%s --config auth.default.prefix=* --config auth.default.username=%s --config auth.default.password=%s --config \"auth.default.schemes=%s\" clone %s %s://%s/%s %s" % (basecmd, ud.user, ud.pswd, proto, " ".join(options), proto, hgroot, ud.module, ud.module)
+            else:
+                cmd = "%s clone %s %s://%s/%s %s" % (basecmd, " ".join(options), proto, hgroot, ud.module, ud.module)	      
         elif command == "pull":
             # do not pass options list; limiting pull to rev causes the local
             # repo not to contain it and immediately following "update" command
@@ -120,7 +123,7 @@ class Hg(FetchMethod):
             else:
                 cmd = "%s pull" % (basecmd)
         elif command == "update":
-            cmd = "%s update -C %s" % (basecmd, " ".join(options))
+            cmd = "%s update --config auth.default.prefix=* --config auth.default.username=%s --config auth.default.password=%s --config \"auth.default.schemes=%s\" -C %s" % (basecmd, ud.user, ud.pswd, proto, " ".join(options))
         else:
             raise FetchError("Invalid hg command %s" % command, ud.url)
 

bitbake/lib/bb/fetch2/perforce.py

@@ -48,7 +48,7 @@ class Perforce(FetchMethod):
             (user, pswd, host, port) = path.split('@')[0].split(":")
             path = path.split('@')[1]
         else:
-            (host, port) = data.getVar('P4PORT', d).split(':')
+            (host, port) = d.getVar('P4PORT').split(':')
             user = ""
             pswd = ""
 
@@ -81,7 +81,7 @@ class Perforce(FetchMethod):
         if host:
             p4opt += " -p %s" % (host)
 
-        p4date = data.getVar("P4DATE", d, True)
+        p4date = d.getVar("P4DATE", True)
         if "revision" in parm:
             depot += "#%s" % (parm["revision"])
         elif "label" in parm:
@@ -89,7 +89,7 @@ class Perforce(FetchMethod):
         elif p4date:
             depot += "@%s" % (p4date)
 
-        p4cmd = data.getVar('FETCHCOMMAND_p4', d, True)
+        p4cmd = d.getVar('FETCHCMD_p4', True) or "p4"
         logger.debug(1, "Running %s%s changes -m 1 %s", p4cmd, p4opt, depot)
         p4file, errors = bb.process.run("%s%s changes -m 1 %s" % (p4cmd, p4opt, depot))
         cset = p4file.strip()
@@ -134,10 +134,6 @@ class Perforce(FetchMethod):
 
         module = parm.get('module', os.path.basename(path))
 
-        localdata = data.createCopy(d)
-        data.setVar('OVERRIDES', "p4:%s" % data.getVar('OVERRIDES', localdata), localdata)
-        data.update_data(localdata)
-
         # Get the p4 command
         p4opt = ""
         if user:
@@ -149,13 +145,13 @@ class Perforce(FetchMethod):
         if host:
             p4opt += " -p %s" % (host)
 
-        p4cmd = data.getVar('FETCHCOMMAND', localdata, True)
+        p4cmd = d.getVar('FETCHCMD_p4', True) or "p4"
 
         # create temp directory
         logger.debug(2, "Fetch: creating temporary directory")
-        bb.utils.mkdirhier(data.expand('${WORKDIR}', localdata))
-        data.setVar('TMPBASE', data.expand('${WORKDIR}/oep4.XXXXXX', localdata), localdata)
-        tmpfile, errors = bb.process.run(data.getVar('MKTEMPDIRCMD', localdata, True) or "false")
+        bb.utils.mkdirhier(d.expand('${WORKDIR}'))
+        mktemp = d.getVar("FETCHCMD_p4mktemp", True) or d.expand("mktemp -d -q '${WORKDIR}/oep4.XXXXXX'")
+        tmpfile, errors = bb.process.run(mktemp)
         tmpfile = tmpfile.strip()
         if not tmpfile:
             raise FetchError("Fetch: unable to create temporary directory.. make sure 'mktemp' is in the PATH.", ud.url)

bitbake/lib/bb/fetch2/svk.py

@@ -1,97 +0,0 @@
-# ex:ts=4:sw=4:sts=4:et
-# -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*-
-"""
-BitBake 'Fetch' implementations
-
-This implementation is for svk. It is based on the svn implementation
-
-"""
-
-# Copyright (C) 2006 Holger Hans Peter Freyther
-# Copyright (C) 2003, 2004  Chris Larson
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Based on functions from the base bb module, Copyright 2003 Holger Schurig
-
-import os
-import logging
-import bb
-from   bb import data
-from   bb.fetch2 import FetchMethod
-from   bb.fetch2 import FetchError
-from   bb.fetch2 import MissingParameterError
-from   bb.fetch2 import logger
-from   bb.fetch2 import runfetchcmd
-
-class Svk(FetchMethod):
-    """Class to fetch a module or modules from svk repositories"""
-    def supports(self, ud, d):
-        """
-        Check to see if a given url can be fetched with svk.
-        """
-        return ud.type in ['svk']
-
-    def urldata_init(self, ud, d):
-
-        if not "module" in ud.parm:
-            raise MissingParameterError('module', ud.url)
-        else:
-            ud.module = ud.parm["module"]
-
-        ud.revision = ud.parm.get('rev', "")
-
-        ud.localfile = data.expand('%s_%s_%s_%s_%s.tar.gz' % (ud.module.replace('/', '.'), ud.host, ud.path.replace('/', '.'), ud.revision, ud.date), d)
-
-    def need_update(self, ud, d):
-        if ud.date == "now":
-            return True
-        if not os.path.exists(ud.localpath):
-            return True
-        return False
-
-    def download(self, ud, d):
-        """Fetch urls"""
-
-        svkroot = ud.host + ud.path
-
-        svkcmd = "svk co -r {%s} %s/%s" % (ud.date, svkroot, ud.module)
-
-        if ud.revision:
-            svkcmd = "svk co -r %s %s/%s" % (ud.revision, svkroot, ud.module)
-
-        # create temp directory
-        localdata = data.createCopy(d)
-        data.update_data(localdata)
-        logger.debug(2, "Fetch: creating temporary directory")
-        bb.utils.mkdirhier(data.expand('${WORKDIR}', localdata))
-        data.setVar('TMPBASE', data.expand('${WORKDIR}/oesvk.XXXXXX', localdata), localdata)
-        tmpfile, errors = bb.process.run(data.getVar('MKTEMPDIRCMD', localdata, True) or "false")
-        tmpfile = tmpfile.strip()
-        if not tmpfile:
-            logger.error()
-            raise FetchError("Fetch: unable to create temporary directory.. make sure 'mktemp' is in the PATH.", ud.url)
-
-        # check out sources there
-        os.chdir(tmpfile)
-        logger.info("Fetch " + ud.url)
-        logger.debug(1, "Running %s", svkcmd)
-        runfetchcmd(svkcmd, d, cleanup = [tmpfile])
-
-        os.chdir(os.path.join(tmpfile, os.path.dirname(ud.module)))
-        # tar them up to a defined filename
-        runfetchcmd("tar -czf %s %s" % (ud.localpath, os.path.basename(ud.module)), d, cleanup = [ud.localpath])
-
-        # cleanup
-        bb.utils.prunedir(tmpfile)

bitbake/lib/bb/fetch2/wget.py

@@ -58,44 +58,49 @@ class Wget(FetchMethod):
 
         ud.localfile = data.expand(urllib.unquote(ud.basename), d)
 
-    def download(self, ud, d, checkonly = False):
+        self.basecmd = d.getVar("FETCHCMD_wget", True) or "/usr/bin/env wget -t 2 -T 30 -nv --passive-ftp --no-check-certificate"
+
+    def _runwget(self, ud, d, command, quiet):
+
+        logger.debug(2, "Fetching %s using command '%s'" % (ud.url, command))
+        bb.fetch2.check_network_access(d, command)
+        runfetchcmd(command, d, quiet)
+
+    def download(self, ud, d):
         """Fetch urls"""
 
-        basecmd = d.getVar("FETCHCMD_wget", True) or "/usr/bin/env wget -t 2 -T 30 -nv --passive-ftp --no-check-certificate"
+        fetchcmd = self.basecmd
 
-        if not checkonly and 'downloadfilename' in ud.parm:
+        if 'downloadfilename' in ud.parm:
             dldir = d.getVar("DL_DIR", True)
             bb.utils.mkdirhier(os.path.dirname(dldir + os.sep + ud.localfile))
-            basecmd += " -O " + dldir + os.sep + ud.localfile
-
-        if checkonly:
-            fetchcmd = d.getVar("CHECKCOMMAND_wget", True) or d.expand(basecmd + " --spider '${URI}'")
-        elif os.path.exists(ud.localpath):
-            # file exists, but we didnt complete it.. trying again..
-            fetchcmd = d.getVar("RESUMECOMMAND_wget", True) or d.expand(basecmd + " -c -P ${DL_DIR} '${URI}'")
-        else:
-            fetchcmd = d.getVar("FETCHCOMMAND_wget", True) or d.expand(basecmd + " -P ${DL_DIR} '${URI}'")
+            fetchcmd += " -O " + dldir + os.sep + ud.localfile
 
         uri = ud.url.split(";")[0]
+        if os.path.exists(ud.localpath):
+            # file exists, but we didnt complete it.. trying again..
+            fetchcmd += d.expand(" -c -P ${DL_DIR} '%s'" % uri)
+        else:
+            fetchcmd += d.expand(" -P ${DL_DIR} '%s'" % uri)
 
-        fetchcmd = fetchcmd.replace("${URI}", uri.split(";")[0])
-        fetchcmd = fetchcmd.replace("${FILE}", ud.basename)
-        if not checkonly:
-            logger.info("fetch " + uri)
-            logger.debug(2, "executing " + fetchcmd)
-        bb.fetch2.check_network_access(d, fetchcmd)
-        runfetchcmd(fetchcmd, d, quiet=checkonly)
+        self._runwget(ud, d, fetchcmd, False)
 
         # Sanity check since wget can pretend it succeed when it didn't
         # Also, this used to happen if sourceforge sent us to the mirror page
-        if not os.path.exists(ud.localpath) and not checkonly:
+        if not os.path.exists(ud.localpath):
             raise FetchError("The fetch command returned success for url %s but %s doesn't exist?!" % (uri, ud.localpath), uri)
 
-        if not checkonly and os.path.getsize(ud.localpath) == 0:
+        if os.path.getsize(ud.localpath) == 0:
             os.remove(ud.localpath)
             raise FetchError("The fetch of %s resulted in a zero size file?! Deleting and failing since this isn't right." % (uri), uri)
 
         return True
 
     def checkstatus(self, ud, d):
-        return self.download(ud, d, True)
+
+        uri = ud.url.split(";")[0]
+        fetchcmd = self.basecmd + " --spider '%s'" % uri
+
+        self._runwget(ud, d, fetchcmd, True)
+
+        return True

bitbake/lib/bb/msg.py

@@ -126,7 +126,21 @@ class BBLogFilter(object):
             return True
         return False
 
+class BBLogFilterStdErr(BBLogFilter):
+    def filter(self, record):
+        if not BBLogFilter.filter(self, record):
+            return False
+        if record.levelno >= logging.ERROR:
+            return True
+        return False
 
+class BBLogFilterStdOut(BBLogFilter):
+    def filter(self, record):
+        if not BBLogFilter.filter(self, record):
+            return False
+        if record.levelno < logging.ERROR:
+            return True
+        return False
 
 # Message control functions
 #
@@ -164,10 +178,10 @@ def constructLogOptions():
         debug_domains["BitBake.%s" % domainarg] = logging.DEBUG - dlevel + 1
     return level, debug_domains
 
-def addDefaultlogFilter(handler):
+def addDefaultlogFilter(handler, cls = BBLogFilter):
     level, debug_domains = constructLogOptions()
 
-    BBLogFilter(handler, level, debug_domains)
+    cls(handler, level, debug_domains)
 
 #
 # Message handling functions

bitbake/lib/bb/parse/ast.py

@@ -139,6 +139,8 @@ class DataNode(AstNode):
             data.setVar(key, val, **loginfo)
 
 class MethodNode(AstNode):
+    tr_tbl = string.maketrans('/.+-@%', '______')
+
     def __init__(self, filename, lineno, func_name, body):
         AstNode.__init__(self, filename, lineno)
         self.func_name = func_name
@@ -147,7 +149,7 @@ class MethodNode(AstNode):
     def eval(self, data):
         text = '\n'.join(self.body)
         if self.func_name == "__anonymous":
-            funcname = ("__anon_%s_%s" % (self.lineno, self.filename.translate(string.maketrans('/.+-@', '_____'))))
+            funcname = ("__anon_%s_%s" % (self.lineno, self.filename.translate(MethodNode.tr_tbl)))
             text = "def %s(d):\n" % (funcname) + text
             bb.methodpool.insert_method(funcname, text, self.filename)
             anonfuncs = data.getVar('__BBANONFUNCS') or []

bitbake/lib/bb/parse/parse_py/ConfHandler.py

@@ -144,7 +144,7 @@ def handle(fn, data, include):
         # skip comments
         if s[0] == '#':
             continue
-        feeder(lineno, s, fn, statements)
+        feeder(lineno, s, abs_fn, statements)
 
     # DONE WITH PARSING... time to evaluate
     data.setVar('FILE', abs_fn)

bitbake/lib/bb/providers.py

@@ -325,7 +325,7 @@ def filterProvidersRunTime(providers, item, cfgData, dataCache):
         provides = dataCache.pn_provides[pn]
         for provide in provides:
             prefervar = cfgData.getVar('PREFERRED_PROVIDER_%s' % provide, True)
-            logger.debug(1, "checking PREFERRED_PROVIDER_%s (value %s) against %s", provide, prefervar, pns.keys())
+            #logger.debug(1, "checking PREFERRED_PROVIDER_%s (value %s) against %s", provide, prefervar, pns.keys())
             if prefervar in pns and pns[prefervar] not in preferred:
                 var = "PREFERRED_PROVIDER_%s = %s" % (provide, prefervar)
                 logger.verbose("selecting %s to satisfy runtime %s due to %s", prefervar, item, var)

bitbake/lib/bb/runqueue.py

@@ -139,7 +139,7 @@ class RunQueueScheduler(object):
         bestprio = None
         for taskid in self.buildable:
             prio = self.rev_prio_map[taskid]
-            if not bestprio or bestprio > prio:
+            if bestprio is None or bestprio > prio:
                 stamp = self.stamps[taskid]
                 if stamp in self.rq.build_stamps.itervalues():
                     continue
@@ -370,11 +370,11 @@ class RunQueueData:
 
         for listid in xrange(numTasks):
             task_done.append(False)
-            weight.append(0)
+            weight.append(1)
             deps_left.append(len(self.runq_revdeps[listid]))
 
         for listid in endpoints:
-            weight[listid] = 1
+            weight[listid] = 10
             task_done[listid] = True
 
         while True:
@@ -481,7 +481,7 @@ class RunQueueData:
             fn = taskData.fn_index[fnid]
             task_deps = self.dataCache.task_deps[fn]
 
-            logger.debug(2, "Processing %s:%s", fn, taskData.tasks_name[task])
+            #logger.debug(2, "Processing %s:%s", fn, taskData.tasks_name[task])
 
             if fnid not in taskData.failed_fnids:
 
@@ -869,7 +869,7 @@ class RunQueue:
         else:
             worker = subprocess.Popen(["bitbake-worker", "decafbad"], stdout=subprocess.PIPE, stdin=subprocess.PIPE)
         bb.utils.nonblockingfd(worker.stdout)
-        workerpipe = runQueuePipe(worker.stdout, None, self.cfgData, rqexec)
+        workerpipe = runQueuePipe(worker.stdout, None, self.cfgData, self, rqexec)
 
         workerdata = {
             "taskdeps" : self.rqdata.dataCache.task_deps,
@@ -900,8 +900,11 @@ class RunQueue:
         if not worker:
             return
         logger.debug(1, "Teardown for bitbake-worker")
-        worker.stdin.write("<quit></quit>")
-        worker.stdin.flush()
+        try:
+           worker.stdin.write("<quit></quit>")
+           worker.stdin.flush()
+        except IOError:
+           pass
         while worker.returncode is None:
             workerpipe.read()
             worker.poll()
@@ -912,6 +915,7 @@ class RunQueue:
     def start_worker(self):
         if self.worker:
             self.teardown_workers()
+        self.teardown = False
         self.worker, self.workerpipe = self._start_worker()
 
     def start_fakeworker(self, rqexec):
@@ -919,6 +923,7 @@ class RunQueue:
             self.fakeworker, self.fakeworkerpipe = self._start_worker(True, rqexec)
 
     def teardown_workers(self):
+        self.teardown = True
         self._teardown_worker(self.worker, self.workerpipe)
         self.worker = None
         self.workerpipe = None
@@ -1031,10 +1036,13 @@ class RunQueue:
                     bb.event.fire(bb.event.DepTreeGenerated(depgraph), self.cooker.data)
 
         if self.state is runQueueSceneInit:
-            if self.cooker.configuration.dump_signatures:
-                invalidtasks = self.print_diffscenetasks()
-                self.dump_signatures()
-                self.write_diffscenetasks(invalidtasks)
+            dump = self.cooker.configuration.dump_signatures
+            if dump:
+                if 'printdiff' in dump:
+                    invalidtasks = self.print_diffscenetasks()
+                self.dump_signatures(dump)
+                if 'printdiff' in dump:
+                    self.write_diffscenetasks(invalidtasks)
                 self.state = runQueueComplete
             else:
                 self.start_worker()
@@ -1105,7 +1113,7 @@ class RunQueue:
         else:
             self.rqexe.finish()
 
-    def dump_signatures(self):
+    def dump_signatures(self, options):
         done = set()
         bb.note("Reparsing files to collect dependency data")
         for task in range(len(self.rqdata.runq_fnid)):
@@ -1114,7 +1122,7 @@ class RunQueue:
                 the_data = bb.cache.Cache.loadDataFull(fn, self.cooker.collection.get_file_appends(fn), self.cooker.data)
                 done.add(self.rqdata.runq_fnid[task])
 
-        bb.parse.siggen.dump_sigs(self.rqdata.dataCache)
+        bb.parse.siggen.dump_sigs(self.rqdata.dataCache, options)
 
         return
 
@@ -1273,11 +1281,15 @@ class RunQueueExecute:
 
     def finish_now(self):
 
-        self.rq.worker.stdin.write("<finishnow></finishnow>")
-        self.rq.worker.stdin.flush()
-        if self.rq.fakeworker:
-            self.rq.fakeworker.stdin.write("<finishnow></finishnow>")
-            self.rq.fakeworker.stdin.flush()
+        for worker in [self.rq.worker, self.rq.fakeworker]:
+            if not worker:
+                continue
+            try:
+                worker.stdin.write("<finishnow></finishnow>")
+                worker.stdin.flush()
+            except IOError:
+                # worker must have died?
+                pass
 
         if len(self.failed_fnids) != 0:
             self.rq.state = runQueueFailed
@@ -1735,7 +1747,7 @@ class RunQueueExecuteScenequeue(RunQueueExecute):
                     dep = self.rqdata.taskData.fn_index[depdata]
                     taskid = self.rqdata.get_task_id(self.rqdata.taskData.getfn_id(dep), idependtask.replace("_setscene", ""))
                     if taskid is None:
-                        bb.msg.fatal("RunQueue", "Task %s_setscene depends upon non-existent task %s:%s" % (self.self.rqdata.get_user_idstring(task), dep, idependtask))
+                        bb.msg.fatal("RunQueue", "Task %s_setscene depends upon non-existent task %s:%s" % (self.rqdata.get_user_idstring(task), dep, idependtask))
 
                     if not self.rqdata.runq_setscene.index(taskid) in self.sq_harddeps:
                         self.sq_harddeps[self.rqdata.runq_setscene.index(taskid)] = set()
@@ -1745,6 +1757,10 @@ class RunQueueExecuteScenequeue(RunQueueExecute):
                     # Have to zero this to avoid circular dependencies
                     sq_revdeps_squash[self.rqdata.runq_setscene.index(taskid)] = set()
 
+        for task in self.sq_harddeps:
+             for dep in self.sq_harddeps[task]:
+                 sq_revdeps_squash[dep].add(task)
+
         #for task in xrange(len(sq_revdeps_squash)):
         #    realtask = self.rqdata.runq_setscene[task]
         #    bb.warn("Task %s: %s_setscene is %s " % (task, self.rqdata.get_user_idstring(realtask) , sq_revdeps_squash[task]))
@@ -1763,6 +1779,7 @@ class RunQueueExecuteScenequeue(RunQueueExecute):
             if len(self.sq_revdeps[task]) == 0:
                 self.runq_buildable[task] = 1
 
+        self.outrightfail = []
         if self.rq.hashvalidate:
             sq_hash = []
             sq_hashfn = []
@@ -1813,7 +1830,7 @@ class RunQueueExecuteScenequeue(RunQueueExecute):
                     realtask = self.rqdata.runq_setscene[task]
                     logger.debug(2, 'No package found, so skipping setscene task %s',
                                  self.rqdata.get_user_idstring(realtask))
-                    self.task_failoutright(task)
+                    self.outrightfail.append(task)
 
         logger.info('Executing SetScene Tasks')
 
@@ -1898,6 +1915,9 @@ class RunQueueExecuteScenequeue(RunQueueExecute):
                             self.task_skip(nexttask)
                             self.scenequeue_notneeded.add(nexttask)
                             return True
+                    if nexttask in self.outrightfail:
+                        self.task_failoutright(nexttask)
+                        return True
                     task = nexttask
                     break
         if task is not None:
@@ -2011,7 +2031,7 @@ class sceneQueueEvent(runQueueEvent):
         self.taskstring = rq.rqdata.get_user_idstring(realtask, "_setscene")
         self.taskname = rq.rqdata.get_task_name(realtask) + "_setscene"
         self.taskfile = rq.rqdata.get_task_file(realtask)
-        self.taskhash = rq.rqdata.get_task_hash(task)
+        self.taskhash = rq.rqdata.get_task_hash(realtask)
 
 class runQueueTaskStarted(runQueueEvent):
     """
@@ -2067,7 +2087,7 @@ class runQueuePipe():
     """
     Abstraction for a pipe between a worker thread and the server
     """
-    def __init__(self, pipein, pipeout, d, rq):
+    def __init__(self, pipein, pipeout, d, rq, rqexec):
         self.input = pipein
         if pipeout:
             pipeout.close()
@@ -2075,11 +2095,25 @@ class runQueuePipe():
         self.queue = ""
         self.d = d
         self.rq = rq
+        self.rqexec = rqexec
 
-    def setrunqueueexec(self, rq):
-        self.rq = rq
+    def setrunqueueexec(self, rqexec):
+        self.rqexec = rqexec
 
     def read(self):
+        for w in [self.rq.worker, self.rq.fakeworker]:
+            if not w:
+                continue
+            w.poll()
+            if w.returncode is not None and not self.rq.teardown:
+                name = None
+                if self.rq.worker and w.pid == self.rq.worker.pid:
+                    name = "Worker"
+                elif self.rq.fakeworker and w.pid == self.rq.fakeworker.pid:
+                    name = "Fakeroot"
+                bb.error("%s process (%s) exited unexpectedly (%s), shutting down..." % (name, w.pid, str(w.returncode)))
+                self.rq.finish_runqueue(True)
+
         start = len(self.queue)
         try:
             self.queue = self.queue + self.input.read(102400)
@@ -2092,15 +2126,21 @@ class runQueuePipe():
             found = False
             index = self.queue.find("</event>")
             while index != -1 and self.queue.startswith("<event>"):
-                event = pickle.loads(self.queue[7:index])
+                try:
+                    event = pickle.loads(self.queue[7:index])
+                except ValueError as e:
+                    bb.msg.fatal("RunQueue", "failed load pickle '%s': '%s'" % (e, self.queue[7:index]))
                 bb.event.fire_from_worker(event, self.d)
                 found = True
                 self.queue = self.queue[index+8:]
                 index = self.queue.find("</event>")
             index = self.queue.find("</exitcode>")
             while index != -1 and self.queue.startswith("<exitcode>"):
-                task, status = pickle.loads(self.queue[10:index])
-                self.rq.runqueue_process_waitpid(task, status)
+                try:
+                    task, status = pickle.loads(self.queue[10:index])
+                except ValueError as e:
+                    bb.msg.fatal("RunQueue", "failed load pickle '%s': '%s'" % (e, self.queue[10:index]))
+                self.rqexec.runqueue_process_waitpid(task, status)
                 found = True
                 self.queue = self.queue[index+11:]
                 index = self.queue.find("</exitcode>")

bitbake/lib/bb/server/process.py

@@ -80,15 +80,14 @@ class ProcessServer(Process, BaseImplServer):
 
     def __init__(self, command_channel, event_queue, featurelist):
         BaseImplServer.__init__(self)
-        Process.__init__(self, args=(featurelist))
+        Process.__init__(self)
         self.command_channel = command_channel
         self.event_queue = event_queue
         self.event = EventAdapter(event_queue)
         self.featurelist = featurelist
         self.quit = False
 
-        self.keep_running = Event()
-        self.keep_running.set()
+        self.quitin, self.quitout = Pipe()
         self.event_handle = multiprocessing.Value("i")
 
     def run(self):
@@ -96,26 +95,23 @@ class ProcessServer(Process, BaseImplServer):
             self.event_queue.put(event)
         self.event_handle.value = bb.event.register_UIHhandler(self)
 
-        # process any feature changes based on what UI requested
-        original_featureset = list(self.cooker.featureset)
-        while len(self.featurelist)> 0:
-            self.cooker.featureset.setFeature(self.featurelist.pop())
-        if (original_featureset != list(self.cooker.featureset)):
-            self.cooker.reset()
-
         bb.cooker.server_main(self.cooker, self.main)
 
     def main(self):
         # Ignore SIGINT within the server, as all SIGINT handling is done by
         # the UI and communicated to us
+        self.quitin.close()
         signal.signal(signal.SIGINT, signal.SIG_IGN)
-        while self.keep_running.is_set():
+        while not self.quit:
             try:
                 if self.command_channel.poll():
                     command = self.command_channel.recv()
                     self.runCommand(command)
+                if self.quitout.poll():
+                    self.quitout.recv()
+                    self.quit = True
 
-                self.idle_commands(.1, [self.event_queue._reader, self.command_channel])
+                self.idle_commands(.1, [self.event_queue._reader, self.command_channel, self.quitout])
             except Exception:
                 logger.exception('Running command %s', command)
 
@@ -123,7 +119,6 @@ class ProcessServer(Process, BaseImplServer):
         bb.event.unregister_UIHhandler(self.event_handle.value)
         self.command_channel.close()
         self.cooker.shutdown(True)
-        self.idle_commands(.1)
 
     def idle_commands(self, delay, fds = []):
         nextsleep = delay
@@ -133,6 +128,7 @@ class ProcessServer(Process, BaseImplServer):
                 retval = function(self, data, False)
                 if retval is False:
                     del self._idlefuns[function]
+                    nextsleep = None
                 elif retval is True:
                     nextsleep = None
                 elif nextsleep is None:
@@ -154,7 +150,8 @@ class ProcessServer(Process, BaseImplServer):
         self.command_channel.send(self.cooker.command.runCommand(command))
 
     def stop(self):
-        self.keep_running.clear()
+        self.quitin.send("quit")
+        self.quitin.close()
 
 class BitBakeProcessServerConnection(BitBakeBaseServerConnection):
     def __init__(self, serverImpl, ui_channel, event_queue):
@@ -164,6 +161,10 @@ class BitBakeProcessServerConnection(BitBakeBaseServerConnection):
         self.connection = ServerCommunicator(self.ui_channel, self.procserver.event_handle)
         self.events = self.event_queue
 
+    def sigterm_terminate(self):
+        bb.error("UI received SIGTERM")
+        self.terminate()
+
     def terminate(self):
         def flushevents():
             while True:
@@ -183,10 +184,20 @@ class BitBakeProcessServerConnection(BitBakeBaseServerConnection):
 
         self.ui_channel.close()
         self.event_queue.close()
+        self.event_queue.setexit()
 
 # Wrap Queue to provide API which isn't server implementation specific
 class ProcessEventQueue(multiprocessing.queues.Queue):
+    def __init__(self, maxsize):
+        multiprocessing.queues.Queue.__init__(self, maxsize)
+        self.exit = False
+
+    def setexit(self):
+        self.exit = True
+
     def waitEvent(self, timeout):
+        if self.exit:
+            raise KeyboardInterrupt()
         try:
             return self.get(True, timeout)
         except Empty:
@@ -207,17 +218,19 @@ class BitBakeServer(BitBakeBaseServer):
         #
         self.ui_channel, self.server_channel = Pipe()
         self.event_queue = ProcessEventQueue(0)
-        manager = Manager()
-        self.featurelist = manager.list()
-        self.serverImpl = ProcessServer(self.server_channel, self.event_queue, self.featurelist)
+        self.serverImpl = ProcessServer(self.server_channel, self.event_queue, None)
 
     def detach(self):
         self.serverImpl.start()
         return
 
     def establishConnection(self, featureset):
-        for f in featureset:
-            self.featurelist.append(f)
+
         self.connection = BitBakeProcessServerConnection(self.serverImpl, self.ui_channel, self.event_queue)
-        signal.signal(signal.SIGTERM, lambda i, s: self.connection.terminate())
+
+        _, error = self.connection.connection.runCommand(["setFeatures", featureset])
+        if error:
+            logger.error("Unable to set the cooker to the correct featureset: %s" % error)
+            raise BaseException(error)
+        signal.signal(signal.SIGTERM, lambda i, s: self.connection.sigterm_terminate())
         return self.connection

bitbake/lib/bb/server/xmlrpc.py

@@ -89,7 +89,7 @@ class BitBakeServerCommands():
         self.server = server
         self.has_client = False
 
-    def registerEventHandler(self, host, port, featureset = []):
+    def registerEventHandler(self, host, port):
         """
         Register a remote UI Event Handler
         """
@@ -99,13 +99,6 @@ class BitBakeServerCommands():
         if (self.cooker.state in [bb.cooker.state.parsing, bb.cooker.state.running]):
             return None
 
-        original_featureset = list(self.cooker.featureset)
-        for f in featureset:
-            self.cooker.featureset.setFeature(f)
-
-        if (original_featureset != list(self.cooker.featureset)):
-            self.cooker.reset()
-
         self.event_handle = bb.event.register_UIHhandler(s)
         return self.event_handle
 
@@ -293,9 +286,15 @@ class BitBakeXMLRPCServerConnection(BitBakeBaseServerConnection):
             return None
         self.transport.set_connection_token(token)
 
-        self.events = uievent.BBUIEventQueue(self.connection, self.clientinfo, self.featureset)
+        self.events = uievent.BBUIEventQueue(self.connection, self.clientinfo)
         for event in bb.event.ui_queue:
             self.events.queue_event(event)
+
+        _, error = self.connection.runCommand(["setFeatures", self.featureset])
+        if error:
+            # no need to log it here, the error shall be sent to the client
+            raise BaseException(error)
+
         return self
 
     def removeClient(self):

bitbake/lib/bb/siggen.py

@@ -59,7 +59,7 @@ class SignatureGenerator(object):
     def invalidate_task(self, task, d, fn):
         bb.build.del_stamp(task, d, fn)
 
-    def dump_sigs(self, dataCache):
+    def dump_sigs(self, dataCache, options):
         return
 
 class SignatureGeneratorBasic(SignatureGenerator):
@@ -251,7 +251,7 @@ class SignatureGeneratorBasic(SignatureGenerator):
                 pass
             raise err
 
-    def dump_sigs(self, dataCache):
+    def dump_sigs(self, dataCache, options):
         for fn in self.taskdeps:
             for task in self.taskdeps[fn]:
                 k = fn + "." + task

bitbake/lib/bb/taskdata.py

@@ -207,23 +207,29 @@ class TaskData:
         if not fnid in self.depids:
             dependids = {}
             for depend in dataCache.deps[fn]:
-                logger.debug(2, "Added dependency %s for %s", depend, fn)
                 dependids[self.getbuild_id(depend)] = None
             self.depids[fnid] = dependids.keys()
+            logger.debug(2, "Added dependencies %s for %s", str(dataCache.deps[fn]), fn)
 
         # Work out runtime dependencies
         if not fnid in self.rdepids:
             rdependids = {}
             rdepends = dataCache.rundeps[fn]
             rrecs = dataCache.runrecs[fn]
+            rdependlist = []
+            rreclist = []
             for package in rdepends:
                 for rdepend in rdepends[package]:
-                    logger.debug(2, "Added runtime dependency %s for %s", rdepend, fn)
+                    rdependlist.append(rdepend)
                     rdependids[self.getrun_id(rdepend)] = None
             for package in rrecs:
                 for rdepend in rrecs[package]:
-                    logger.debug(2, "Added runtime recommendation %s for %s", rdepend, fn)
+                    rreclist.append(rdepend)
                     rdependids[self.getrun_id(rdepend)] = None
+            if rdependlist:
+                logger.debug(2, "Added runtime dependencies %s for %s", str(rdependlist), fn)
+            if rreclist:
+                logger.debug(2, "Added runtime recommendations %s for %s", str(rreclist), fn)
             self.rdepids[fnid] = rdependids.keys()
 
         for dep in self.depids[fnid]:

bitbake/lib/bb/tests/codeparser.py

@@ -236,7 +236,8 @@ be. These unit tests are testing snippets."""
             self.d.setVar("do_something", "echo 'hi mom! ${FOO}'")
             self.d.setVarFlag("do_something", etype, True)
             self.parseExpression("bb.build.exec_func('do_something', d)")
-            self.assertReferences(set(["do_something"]))
+            self.assertReferences(set([]))
+            self.assertExecs(set(["do_something"]))
 
     def test_function_reference(self):
         self.context["testfunc"] = lambda msg: bb.msg.note(1, None, msg)

bitbake/lib/bb/tests/data.py

@@ -23,6 +23,7 @@
 import unittest
 import bb
 import bb.data
+import bb.parse
 
 class DataExpansions(unittest.TestCase):
     def setUp(self):
@@ -212,6 +213,52 @@ class TestConcat(unittest.TestCase):
         self.d.appendVar("TEST", ":${BAR}")
         self.assertEqual(self.d.getVar("TEST", True), "foo:val:val2:bar")
 
+class TestConcatOverride(unittest.TestCase):
+    def setUp(self):
+        self.d = bb.data.init()
+        self.d.setVar("FOO", "foo")
+        self.d.setVar("VAL", "val")
+        self.d.setVar("BAR", "bar")
+
+    def test_prepend(self):
+        self.d.setVar("TEST", "${VAL}")
+        self.d.setVar("TEST_prepend", "${FOO}:")
+        bb.data.update_data(self.d)
+        self.assertEqual(self.d.getVar("TEST", True), "foo:val")
+
+    def test_append(self):
+        self.d.setVar("TEST", "${VAL}")
+        self.d.setVar("TEST_append", ":${BAR}")
+        bb.data.update_data(self.d)
+        self.assertEqual(self.d.getVar("TEST", True), "val:bar")
+
+    def test_multiple_append(self):
+        self.d.setVar("TEST", "${VAL}")
+        self.d.setVar("TEST_prepend", "${FOO}:")
+        self.d.setVar("TEST_append", ":val2")
+        self.d.setVar("TEST_append", ":${BAR}")
+        bb.data.update_data(self.d)
+        self.assertEqual(self.d.getVar("TEST", True), "foo:val:val2:bar")
+
+    def test_remove(self):
+        self.d.setVar("TEST", "${VAL} ${BAR}")
+        self.d.setVar("TEST_remove", "val")
+        bb.data.update_data(self.d)
+        self.assertEqual(self.d.getVar("TEST", True), "bar")
+
+    def test_doubleref_remove(self):
+        self.d.setVar("TEST", "${VAL} ${BAR}")
+        self.d.setVar("TEST_remove", "val")
+        self.d.setVar("TEST_TEST", "${TEST} ${TEST}")
+        bb.data.update_data(self.d)
+        self.assertEqual(self.d.getVar("TEST_TEST", True), "bar bar")
+
+    def test_empty_remove(self):
+        self.d.setVar("TEST", "")
+        self.d.setVar("TEST_remove", "val")
+        bb.data.update_data(self.d)
+        self.assertEqual(self.d.getVar("TEST", True), "")
+
 class TestOverrides(unittest.TestCase):
     def setUp(self):
         self.d = bb.data.init()

bitbake/lib/bb/tests/fetch.py

@@ -39,6 +39,7 @@ class URITest(unittest.TestCase):
             'username': '',
             'password': '',
             'params': {},
+            'query': {},
             'relative': False
         },
         "http://www.google.com/index.html;param1=value1" : {
@@ -54,6 +55,41 @@ class URITest(unittest.TestCase):
             'params': {
                 'param1': 'value1'
             },
+            'query': {},
+            'relative': False
+        },
+        "http://www.example.org/index.html?param1=value1" : {
+            'uri': 'http://www.example.org/index.html?param1=value1',
+            'scheme': 'http',
+            'hostname': 'www.example.org',
+            'port': None,
+            'hostport': 'www.example.org',
+            'path': '/index.html',
+            'userinfo': '',
+            'username': '',
+            'password': '',
+            'params': {},
+            'query': {
+                'param1': 'value1'
+            },
+            'relative': False
+        },
+        "http://www.example.org/index.html?qparam1=qvalue1;param2=value2" : {
+            'uri': 'http://www.example.org/index.html?qparam1=qvalue1;param2=value2',
+            'scheme': 'http',
+            'hostname': 'www.example.org',
+            'port': None,
+            'hostport': 'www.example.org',
+            'path': '/index.html',
+            'userinfo': '',
+            'username': '',
+            'password': '',
+            'params': {
+                'param2': 'value2'
+            },
+            'query': {
+                'qparam1': 'qvalue1'
+            },
             'relative': False
         },
         "http://www.example.com:8080/index.html" : {
@@ -67,6 +103,7 @@ class URITest(unittest.TestCase):
             'username': '',
             'password': '',
             'params': {},
+            'query': {},
             'relative': False
         },
         "cvs://anoncvs@cvs.handhelds.org/cvs;module=familiar/dist/ipkg" : {
@@ -82,6 +119,7 @@ class URITest(unittest.TestCase):
             'params': {
                 'module': 'familiar/dist/ipkg'
             },
+            'query': {},
             'relative': False
         },
         "cvs://anoncvs:anonymous@cvs.handhelds.org/cvs;tag=V0-99-81;module=familiar/dist/ipkg": {
@@ -98,6 +136,7 @@ class URITest(unittest.TestCase):
                 'tag': 'V0-99-81',
                 'module': 'familiar/dist/ipkg'
             },
+            'query': {},
             'relative': False
         },
         "file://example.diff": { # NOTE: Not RFC compliant!
@@ -111,6 +150,7 @@ class URITest(unittest.TestCase):
             'username': '',
             'password': '',
             'params': {},
+            'query': {},
             'relative': True
         },
         "file:example.diff": { # NOTE: RFC compliant version of the former
@@ -125,6 +165,7 @@ class URITest(unittest.TestCase):
             'username': '',
             'password': '',
             'params': {},
+            'query': {},
             'relative': True
         },
         "file:///tmp/example.diff": {
@@ -139,6 +180,7 @@ class URITest(unittest.TestCase):
             'username': '',
             'password': '',
             'params': {},
+            'query': {},
             'relative': False
         },
         "git:///path/example.git": {
@@ -153,6 +195,7 @@ class URITest(unittest.TestCase):
             'username': '',
             'password': '',
             'params': {},
+            'query': {},
             'relative': False
         },
         "git:path/example.git": {
@@ -167,6 +210,7 @@ class URITest(unittest.TestCase):
             'username': '',
             'password': '',
             'params': {},
+            'query': {},
             'relative': True
         },
         "git://example.net/path/example.git": {
@@ -181,6 +225,7 @@ class URITest(unittest.TestCase):
             'username': '',
             'password': '',
             'params': {},
+            'query': {},
             'relative': False
         }
     }
@@ -229,6 +274,20 @@ class URITest(unittest.TestCase):
             self.assertEqual(uri.username, test['username'])
             self.assertEqual(uri.password, test['password'])
 
+            # make sure changing the values doesn't do anything unexpected
+            uri.username = 'changeme'
+            self.assertEqual(uri.username, 'changeme')
+            self.assertEqual(uri.password, test['password'])
+            uri.password = 'insecure'
+            self.assertEqual(uri.username, 'changeme')
+            self.assertEqual(uri.password, 'insecure')
+
+            # reset back after our trickery
+            uri.userinfo = test['userinfo']
+            self.assertEqual(uri.userinfo, test['userinfo'])
+            self.assertEqual(uri.username, test['username'])
+            self.assertEqual(uri.password, test['password'])
+
             uri.hostname = test['hostname']
             self.assertEqual(uri.hostname, test['hostname'])
             self.assertEqual(uri.hostport, test['hostname'])
@@ -243,7 +302,8 @@ class URITest(unittest.TestCase):
             uri.params = test['params']
             self.assertEqual(uri.params, test['params'])
 
-            self.assertEqual(str(uri)+str(uri.relative), str(test['uri'])+str(test['relative']))
+            uri.query = test['query']
+            self.assertEqual(uri.query, test['query'])
 
             self.assertEqual(str(uri), test['uri'])
 
@@ -330,6 +390,61 @@ class MirrorUriTest(FetcherTest):
         uris, uds = bb.fetch2.build_mirroruris(fetcher, mirrors, self.d)
         self.assertEqual(uris, ['file:///someotherpath/downloads/bitbake-1.0.tar.gz'])
 
+
+class FetcherLocalTest(FetcherTest):
+    def setUp(self):
+        def touch(fn):
+            with file(fn, 'a'):
+                os.utime(fn, None)
+
+        super(FetcherLocalTest, self).setUp()
+        self.localsrcdir = os.path.join(self.tempdir, 'localsrc')
+        os.makedirs(self.localsrcdir)
+        touch(os.path.join(self.localsrcdir, 'a'))
+        touch(os.path.join(self.localsrcdir, 'b'))
+        os.makedirs(os.path.join(self.localsrcdir, 'dir'))
+        touch(os.path.join(self.localsrcdir, 'dir', 'c'))
+        touch(os.path.join(self.localsrcdir, 'dir', 'd'))
+        os.makedirs(os.path.join(self.localsrcdir, 'dir', 'subdir'))
+        touch(os.path.join(self.localsrcdir, 'dir', 'subdir', 'e'))
+        self.d.setVar("FILESPATH", self.localsrcdir)
+
+    def fetchUnpack(self, uris):
+        fetcher = bb.fetch.Fetch(uris, self.d)
+        fetcher.download()
+        fetcher.unpack(self.unpackdir)
+        flst = []
+        for root, dirs, files in os.walk(self.unpackdir):
+            for f in files:
+                flst.append(os.path.relpath(os.path.join(root, f), self.unpackdir))
+        flst.sort()
+        return flst
+
+    def test_local(self):
+        tree = self.fetchUnpack(['file://a', 'file://dir/c'])
+        self.assertEqual(tree, ['a', 'dir/c'])
+
+    def test_local_wildcard(self):
+        tree = self.fetchUnpack(['file://a', 'file://dir/*'])
+        # FIXME: this is broken - it should return ['a', 'dir/c', 'dir/d', 'dir/subdir/e']
+        # see https://bugzilla.yoctoproject.org/show_bug.cgi?id=6128
+        self.assertEqual(tree, ['a', 'b', 'dir/c', 'dir/d', 'dir/subdir/e'])
+
+    def test_local_dir(self):
+        tree = self.fetchUnpack(['file://a', 'file://dir'])
+        self.assertEqual(tree, ['a', 'dir/c', 'dir/d', 'dir/subdir/e'])
+
+    def test_local_subdir(self):
+        tree = self.fetchUnpack(['file://dir/subdir'])
+        # FIXME: this is broken - it should return ['dir/subdir/e']
+        # see https://bugzilla.yoctoproject.org/show_bug.cgi?id=6129
+        self.assertEqual(tree, ['subdir/e'])
+
+    def test_local_subdir_file(self):
+        tree = self.fetchUnpack(['file://dir/subdir/e'])
+        self.assertEqual(tree, ['dir/subdir/e'])
+
+
 class FetcherNetworkTest(FetcherTest):
 
     if os.environ.get("BB_SKIP_NETTESTS") == "yes":
@@ -417,6 +532,13 @@ class FetcherNetworkTest(FetcherTest):
             self.d.setVar("PREMIRRORS", "%s git://%s;protocol=file \n" % (dummyurl, self.sourcedir))
             self.gitfetcher(dummyurl, dummyurl)
 
+        def test_git_submodule(self):
+            fetcher = bb.fetch.Fetch(["gitsm://git.yoctoproject.org/git-submodule-test;rev=f12e57f2edf0aa534cf1616fa983d165a92b0842"], self.d)
+            fetcher.download()
+            # Previous cwd has been deleted
+            os.chdir(os.path.dirname(self.unpackdir))
+            fetcher.unpack(self.unpackdir)
+
 class URLHandle(unittest.TestCase):
 
     datatable = {

bitbake/lib/bb/tests/utils.py

@@ -21,6 +21,7 @@
 
 import unittest
 import bb
+import os
 
 class VerCmpString(unittest.TestCase):
 
@@ -51,3 +52,52 @@ class VerCmpString(unittest.TestCase):
         result = bb.utils.explode_dep_versions2("foo ( =1.10 )")
         self.assertEqual(result, correctresult)
 
+    def test_vercmp_string_op(self):
+        compareops = [('1', '1', '=', True),
+                      ('1', '1', '==', True),
+                      ('1', '1', '!=', False),
+                      ('1', '1', '>', False),
+                      ('1', '1', '<', False),
+                      ('1', '1', '>=', True),
+                      ('1', '1', '<=', True),
+                      ('1', '0', '=', False),
+                      ('1', '0', '==', False),
+                      ('1', '0', '!=', True),
+                      ('1', '0', '>', True),
+                      ('1', '0', '<', False),
+                      ('1', '0', '>>', True),
+                      ('1', '0', '<<', False),
+                      ('1', '0', '>=', True),
+                      ('1', '0', '<=', False),
+                      ('0', '1', '=', False),
+                      ('0', '1', '==', False),
+                      ('0', '1', '!=', True),
+                      ('0', '1', '>', False),
+                      ('0', '1', '<', True),
+                      ('0', '1', '>>', False),
+                      ('0', '1', '<<', True),
+                      ('0', '1', '>=', False),
+                      ('0', '1', '<=', True)]
+
+        for arg1, arg2, op, correctresult in compareops:
+            result = bb.utils.vercmp_string_op(arg1, arg2, op)
+            self.assertEqual(result, correctresult, 'vercmp_string_op("%s", "%s", "%s") != %s' % (arg1, arg2, op, correctresult))
+
+        # Check that clearly invalid operator raises an exception
+        self.assertRaises(bb.utils.VersionStringException, bb.utils.vercmp_string_op, '0', '0', '$')
+
+
+class Path(unittest.TestCase):
+    def test_unsafe_delete_path(self):
+        checkitems = [('/', True),
+                      ('//', True),
+                      ('///', True),
+                      (os.getcwd().count(os.sep) * ('..' + os.sep), True),
+                      (os.environ.get('HOME', '/home/test'), True),
+                      ('/home/someone', True),
+                      ('/home/other/', True),
+                      ('/home/other/subdir', False),
+                      ('', False)]
+        for arg1, correctresult in checkitems:
+            result = bb.utils._check_unsafe_delete_path(arg1)
+            self.assertEqual(result, correctresult, '_check_unsafe_delete_path("%s") != %s' % (arg1, correctresult))

bitbake/lib/bb/ui/buildinfohelper.py

@@ -25,13 +25,17 @@ import ast
 os.environ.setdefault("DJANGO_SETTINGS_MODULE", "toaster.toastermain.settings")
 
 import toaster.toastermain.settings as toaster_django_settings
-from toaster.orm.models import Build, Task, Recipe, Layer_Version, Layer, Target, LogMessage
+from toaster.orm.models import Build, Task, Recipe, Layer_Version, Layer, Target, LogMessage, HelpText
+from toaster.orm.models import Target_Image_File
 from toaster.orm.models import Variable, VariableHistory
-from toaster.orm.models import Package, Package_File, Target_Installed_Package
+from toaster.orm.models import Package, Package_File, Target_Installed_Package, Target_File
 from toaster.orm.models import Task_Dependency, Package_Dependency
 from toaster.orm.models import Recipe_Dependency
 from bb.msg import BBLogFormatter as format
 
+class NotExisting(Exception):
+    pass
+
 class ORMWrapper(object):
     """ This class creates the dictionaries needed to store information in the database
         following the format defined by the Django models. It is also used to save this
@@ -43,14 +47,20 @@ class ORMWrapper(object):
 
 
     def create_build_object(self, build_info):
+        assert 'machine' in build_info
+        assert 'distro' in build_info
+        assert 'distro_version' in build_info
+        assert 'started_on' in build_info
+        assert 'cooker_log_path' in build_info
+        assert 'build_name' in build_info
+        assert 'bitbake_version' in build_info
 
         build = Build.objects.create(
                                     machine=build_info['machine'],
-                                    image_fstypes=build_info['image_fstypes'],
                                     distro=build_info['distro'],
                                     distro_version=build_info['distro_version'],
                                     started_on=build_info['started_on'],
-                                    completed_on=build_info['completed_on'],
+                                    completed_on=build_info['started_on'],
                                     cooker_log_path=build_info['cooker_log_path'],
                                     build_name=build_info['build_name'],
                                     bitbake_version=build_info['bitbake_version'])
@@ -58,17 +68,22 @@ class ORMWrapper(object):
         return build
 
     def create_target_objects(self, target_info):
+        assert 'build' in target_info
+        assert 'targets' in target_info
+
         targets = []
         for tgt_name in target_info['targets']:
             tgt_object = Target.objects.create( build = target_info['build'],
                                     target = tgt_name,
                                     is_image = False,
-                                    file_name = "",
-                                    file_size = 0);
+                                    );
             targets.append(tgt_object)
         return targets
 
     def update_build_object(self, build, errors, warnings, taskfailures):
+        assert isinstance(build,Build)
+        assert isinstance(errors, int)
+        assert isinstance(warnings, int)
 
         outcome = Build.SUCCEEDED
         if errors or taskfailures:
@@ -81,20 +96,36 @@ class ORMWrapper(object):
         build.outcome = outcome
         build.save()
 
+    def update_target_object(self, target, license_manifest_path):
+
+        target.license_manifest_path = license_manifest_path
+        target.save()
+
+    def get_update_task_object(self, task_information, must_exist = False):
+        assert 'build' in task_information
+        assert 'recipe' in task_information
+        assert 'task_name' in task_information
 
-    def get_update_task_object(self, task_information):
         task_object, created = Task.objects.get_or_create(
                                 build=task_information['build'],
                                 recipe=task_information['recipe'],
                                 task_name=task_information['task_name'],
                                 )
 
+        if must_exist and created:
+            task_information['debug'] = "build id %d, recipe id %d" % (task_information['build'].pk, task_information['recipe'].pk)
+            task_object.delete()
+            raise NotExisting("Task object created when expected to exist", task_information)
+
         for v in vars(task_object):
             if v in task_information.keys():
                 vars(task_object)[v] = task_information[v]
-        # if we got covered by a setscene task, we're CACHED
-        if task_object.outcome == Task.OUTCOME_COVERED and 1 == Task.objects.related_setscene(task_object).count():
-            task_object.outcome = Task.OUTCOME_CACHED
+
+        # update setscene-related information
+        if 1 == Task.objects.related_setscene(task_object).count():
+            if task_object.outcome == Task.OUTCOME_COVERED:
+                task_object.outcome = Task.OUTCOME_CACHED
+
             outcome_task_setscene = Task.objects.get(task_executed=True, build = task_object.build,
                                     recipe = task_object.recipe, task_name=task_object.task_name+"_setscene").outcome
             if outcome_task_setscene == Task.OUTCOME_SUCCESS:
@@ -102,21 +133,28 @@ class ORMWrapper(object):
             elif outcome_task_setscene == Task.OUTCOME_FAILED:
                 task_object.sstate_result = Task.SSTATE_FAILED
 
-        # mark down duration if we have a start time
-        if 'start_time' in task_information.keys():
-            duration = datetime.datetime.now() - task_information['start_time']
-            task_object.elapsed_time = duration.total_seconds()
+        # mark down duration if we have a start time and a current time
+        if 'start_time' in task_information.keys() and 'end_time' in task_information.keys():
+            duration = task_information['end_time'] - task_information['start_time']
+            task_object.elapsed_time = duration
 
         task_object.save()
         return task_object
 
 
-    def get_update_recipe_object(self, recipe_information):
+    def get_update_recipe_object(self, recipe_information, must_exist = False):
+        assert 'layer_version' in recipe_information
+        assert 'file_path' in recipe_information
+
 
         recipe_object, created = Recipe.objects.get_or_create(
                                          layer_version=recipe_information['layer_version'],
                                          file_path=recipe_information['file_path'])
 
+        if must_exist and created:
+            recipe_object.delete()
+            raise NotExisting("Recipe object created when expected to exist", recipe_information)
+
         for v in vars(recipe_object):
             if v in recipe_information.keys():
                 vars(recipe_object)[v] = recipe_information[v]
@@ -126,8 +164,13 @@ class ORMWrapper(object):
         return recipe_object
 
     def get_update_layer_version_object(self, build_obj, layer_obj, layer_version_information):
+        assert isinstance(build_obj, Build)
+        assert isinstance(layer_obj, Layer)
+        assert 'branch' in layer_version_information
+        assert 'commit' in layer_version_information
+        assert 'priority' in layer_version_information
 
-        layer_version_object = Layer_Version.objects.get_or_create(
+        layer_version_object, created = Layer_Version.objects.get_or_create(
                                     build = build_obj,
                                     layer = layer_obj,
                                     branch = layer_version_information['branch'],
@@ -135,22 +178,133 @@ class ORMWrapper(object):
                                     priority = layer_version_information['priority']
                                     )
 
-        layer_version_object[0].save()
-
-        return layer_version_object[0]
+        return layer_version_object
 
     def get_update_layer_object(self, layer_information):
+        assert 'name' in layer_information
+        assert 'local_path' in layer_information
+        assert 'layer_index_url' in layer_information
 
-        layer_object = Layer.objects.get_or_create(
+        layer_object, created = Layer.objects.get_or_create(
                                 name=layer_information['name'],
                                 local_path=layer_information['local_path'],
                                 layer_index_url=layer_information['layer_index_url'])
-        layer_object[0].save()
 
-        return layer_object[0]
+        return layer_object
+
+    def save_target_file_information(self, build_obj, target_obj, filedata):
+        assert isinstance(build_obj, Build)
+        assert isinstance(target_obj, Target)
+        dirs = filedata['dirs']
+        files = filedata['files']
+        syms = filedata['syms']
+
+        # we insert directories, ordered by name depth
+        for d in sorted(dirs, key=lambda x:len(x[-1].split("/"))):
+            (user, group, size) = d[1:4]
+            permission = d[0][1:]
+            path = d[4].lstrip(".")
+            if len(path) == 0:
+                # we create the root directory as a special case
+                path = "/"
+                tf_obj = Target_File.objects.create(
+                        target = target_obj,
+                        path = path,
+                        size = size,
+                        inodetype = Target_File.ITYPE_DIRECTORY,
+                        permission = permission,
+                        owner = user,
+                        group = group,
+                        )
+                tf_obj.directory = tf_obj
+                tf_obj.save()
+                continue
+            parent_path = "/".join(path.split("/")[:len(path.split("/")) - 1])
+            if len(parent_path) == 0:
+                parent_path = "/"
+            parent_obj = Target_File.objects.get(target = target_obj, path = parent_path, inodetype = Target_File.ITYPE_DIRECTORY)
+            tf_obj = Target_File.objects.create(
+                        target = target_obj,
+                        path = path,
+                        size = size,
+                        inodetype = Target_File.ITYPE_DIRECTORY,
+                        permission = permission,
+                        owner = user,
+                        group = group,
+                        directory = parent_obj)
+
+
+        # we insert files
+        for d in files:
+            (user, group, size) = d[1:4]
+            permission = d[0][1:]
+            path = d[4].lstrip(".")
+            parent_path = "/".join(path.split("/")[:len(path.split("/")) - 1])
+            inodetype = Target_File.ITYPE_REGULAR
+            if d[0].startswith('b'):
+                inodetype = Target_File.ITYPE_BLOCK
+            if d[0].startswith('c'):
+                inodetype = Target_File.ITYPE_CHARACTER
+            if d[0].startswith('p'):
+                inodetype = Target_File.ITYPE_FIFO
+
+            tf_obj = Target_File.objects.create(
+                        target = target_obj,
+                        path = path,
+                        size = size,
+                        inodetype = inodetype,
+                        permission = permission,
+                        owner = user,
+                        group = group)
+            parent_obj = Target_File.objects.get(target = target_obj, path = parent_path, inodetype = Target_File.ITYPE_DIRECTORY)
+            tf_obj.directory = parent_obj
+            tf_obj.save()
+
+        # we insert symlinks
+        for d in syms:
+            (user, group, size) = d[1:4]
+            permission = d[0][1:]
+            path = d[4].lstrip(".")
+            filetarget_path = d[6]
+
+            parent_path = "/".join(path.split("/")[:len(path.split("/")) - 1])
+            if not filetarget_path.startswith("/"):
+                # we have a relative path, get a normalized absolute one
+                filetarget_path = parent_path + "/" + filetarget_path
+                fcp = filetarget_path.split("/")
+                fcpl = []
+                for i in fcp:
+                    if i == "..":
+                        fcpl.pop()
+                    else:
+                        fcpl.append(i)
+                filetarget_path = "/".join(fcpl)
+
+            try:
+                filetarget_obj = Target_File.objects.get(target = target_obj, path = filetarget_path)
+            except Exception as e:
+                # we might have an invalid link; no way to detect this. just set it to None
+                filetarget_obj = None
+
+            parent_obj = Target_File.objects.get(target = target_obj, path = parent_path, inodetype = Target_File.ITYPE_DIRECTORY)
+
+            tf_obj = Target_File.objects.create(
+                        target = target_obj,
+                        path = path,
+                        size = size,
+                        inodetype = Target_File.ITYPE_SYMLINK,
+                        permission = permission,
+                        owner = user,
+                        group = group,
+                        directory = parent_obj,
+                        sym_target = filetarget_obj)
 
 
     def save_target_package_information(self, build_obj, target_obj, packagedict, pkgpnmap, recipes):
+        assert isinstance(build_obj, Build)
+        assert isinstance(target_obj, Target)
+
+        errormsg = ""
         for p in packagedict:
             searchname = p
             if 'OPKGN' in pkgpnmap[p].keys():
@@ -178,7 +332,7 @@ class ORMWrapper(object):
                             path = targetpath,
                             size = targetfilesize)
                 except KeyError as e:
-                    print "Key error, package", p, "key", e
+                    errormsg += "  stpi: Key error, package %s key %s \n" % ( p, e )
 
             # save disk installed size
             packagedict[p]['object'].installed_size = packagedict[p]['size']
@@ -198,8 +352,20 @@ class ORMWrapper(object):
                                         dep_type = tdeptype,
                                         target = target_obj);
 
+        if (len(errormsg) > 0):
+            raise Exception(errormsg)
+
+    def save_target_image_file_information(self, target_obj, file_name, file_size):
+        target_image_file = Target_Image_File.objects.create( target = target_obj,
+                            file_name = file_name,
+                            file_size = file_size)
+        target_image_file.save()
 
     def create_logmessage(self, log_information):
+        assert 'build' in log_information
+        assert 'level' in log_information
+        assert 'message' in log_information
+
         log_object = LogMessage.objects.create(
                         build = log_information['build'],
                         level = log_information['level'],
@@ -213,8 +379,10 @@ class ORMWrapper(object):
 
 
     def save_build_package_information(self, build_obj, package_info, recipes):
+        assert isinstance(build_obj, Build)
+
         # create and save the object
-	pname = package_info['PKG']
+        pname = package_info['PKG']
         if 'OPKGN' in package_info.keys():
             pname = package_info['OPKGN']
 
@@ -239,7 +407,11 @@ class ORMWrapper(object):
                                         size = package_info['FILES_INFO'][path] )
 
         def _po_byname(p):
-            return Package.objects.get_or_create(build = build_obj, name = p)[0]
+            pkg, created = Package.objects.get_or_create(build = build_obj, name = p)
+            if created:
+                pkg.size = -1
+                pkg.save()
+            return pkg
 
         # save soft dependency information
         if 'RDEPENDS' in package_info and package_info['RDEPENDS']:
@@ -270,19 +442,26 @@ class ORMWrapper(object):
         return bp_object
 
     def save_build_variables(self, build_obj, vardump):
+        assert isinstance(build_obj, Build)
+
         for k in vardump:
+            desc = vardump[k]['doc'];
+            if desc is None:
+                var_words = [word for word in k.split('_')]
+                root_var = "_".join([word for word in var_words if word.isupper()])
+                if root_var and root_var != k and root_var in vardump:
+                    desc = vardump[root_var]['doc']
+            if desc is None:
+                desc = ''
+            if desc:
+                helptext_obj = HelpText.objects.create(build=build_obj,
+                    area=HelpText.VARIABLE,
+                    key=k,
+                    text=desc)
             if not bool(vardump[k]['func']):
                 value = vardump[k]['v'];
                 if value is None:
                     value = ''
-                desc = vardump[k]['doc'];
-                if desc is None:
-                    var_words = [word for word in k.split('_')]
-                    root_var = "_".join([word for word in var_words if word.isupper()])
-                    if root_var and root_var != k and root_var in vardump:
-                        desc = vardump[root_var]['doc']
-                if desc is None:
-                    desc = ''
                 variable_obj = Variable.objects.create( build = build_obj,
                     variable_name = k,
                     variable_value = value,
@@ -304,6 +483,7 @@ class BuildInfoHelper(object):
     def __init__(self, server, has_build_history = False):
         self._configure_django()
         self.internal_state = {}
+        self.internal_state['taskdata'] = {}
         self.task_order = 0
         self.server = server
         self.orm_wrapper = ORMWrapper()
@@ -327,7 +507,6 @@ class BuildInfoHelper(object):
         build_info['distro_version'] = self.server.runCommand(["getVariable", "DISTRO_VERSION"])[0]
         build_info['started_on'] = datetime.datetime.now()
         build_info['completed_on'] = datetime.datetime.now()
-        build_info['image_fstypes'] = self._remove_redundant(self.server.runCommand(["getVariable", "IMAGE_FSTYPES"])[0] or "")
         build_info['cooker_log_path'] = self.server.runCommand(["getVariable", "BB_CONSOLELOG"])[0]
         build_info['build_name'] = self.server.runCommand(["getVariable", "BUILDNAME"])[0]
         build_info['bitbake_version'] = self.server.runCommand(["getVariable", "BB_VERSION"])[0]
@@ -335,7 +514,7 @@ class BuildInfoHelper(object):
         return build_info
 
     def _get_task_information(self, event, recipe):
-
+        assert 'taskname' in vars(event)
 
         task_information = {}
         task_information['build'] = self.internal_state['build']
@@ -350,7 +529,11 @@ class BuildInfoHelper(object):
         return task_information
 
     def _get_layer_version_for_path(self, path):
+        assert path.startswith("/")
+        assert 'build' in self.internal_state
+
         def _slkey(layer_version):
+            assert isinstance(layer_version, Layer_Version)
             return len(layer_version.layer.local_path)
 
         # Heuristics: we always match recipe to the deepest layer path that
@@ -364,16 +547,17 @@ class BuildInfoHelper(object):
         return None
 
     def _get_recipe_information_from_taskfile(self, taskfile):
-
-        layer_version_obj = self._get_layer_version_for_path(re.split(':', taskfile)[-1])
+        localfilepath = taskfile.split(":")[-1]
+        layer_version_obj = self._get_layer_version_for_path(localfilepath)
 
         recipe_info = {}
         recipe_info['layer_version'] = layer_version_obj
-        recipe_info['file_path'] = re.split(':', taskfile)[-1]
+        recipe_info['file_path'] = taskfile
 
         return recipe_info
 
     def _get_path_information(self, task_object):
+        assert isinstance(task_object, Task)
         build_stats_format = "{tmpdir}/buildstats/{target}-{machine}/{buildname}/{package}/"
         build_stats_path = []
 
@@ -405,6 +589,7 @@ class BuildInfoHelper(object):
     ## external available methods to store information
 
     def store_layer_info(self, event):
+        assert 'data' in vars(event)
         layerinfos = event.data
         self.internal_state['lvs'] = {}
         for layer in layerinfos:
@@ -412,7 +597,7 @@ class BuildInfoHelper(object):
 
 
     def store_started_build(self, event):
-
+        assert '_pkgs' in vars(event)
         build_information = self._get_build_information()
 
         build_obj = self.orm_wrapper.create_build_object(build_information)
@@ -426,7 +611,7 @@ class BuildInfoHelper(object):
 
         # create target information
         target_information = {}
-        target_information['targets'] = event.getPkgs()
+        target_information['targets'] = event._pkgs
         target_information['build'] = build_obj
 
         self.internal_state['targets'] = self.orm_wrapper.create_target_objects(target_information)
@@ -434,21 +619,45 @@ class BuildInfoHelper(object):
         # Save build configuration
         self.orm_wrapper.save_build_variables(build_obj, self.server.runCommand(["getAllKeysWithFlags", ["doc", "func"]])[0])
 
+    def update_target_image_file(self, event):
+        image_fstypes = self.server.runCommand(["getVariable", "IMAGE_FSTYPES"])[0]
+        for t in self.internal_state['targets']:
+            if t.is_image == True:
+                output_files = list(event.data.viewkeys())
+                for output in output_files:
+                    if t.target in output and output.split('.rootfs.')[1] in image_fstypes:
+                        self.orm_wrapper.save_target_image_file_information(t, output, event.data[output])
 
     def update_build_information(self, event, errors, warnings, taskfailures):
         if 'build' in self.internal_state:
             self.orm_wrapper.update_build_object(self.internal_state['build'], errors, warnings, taskfailures)
 
+
+    def store_license_manifest_path(self, event):
+        deploy_dir = event.data['deploy_dir']
+        image_name =  event.data['image_name']
+        path = deploy_dir + "/licenses/" + image_name + "/"
+        for target in self.internal_state['targets']:
+            if target.target in image_name:
+                self.orm_wrapper.update_target_object(target, path)
+
+
     def store_started_task(self, event):
-        identifier = event.taskfile + event.taskname
+        assert isinstance(event, (bb.runqueue.sceneQueueTaskStarted, bb.runqueue.runQueueTaskStarted, bb.runqueue.runQueueTaskSkipped))
+        assert 'taskfile' in vars(event)
+        localfilepath = event.taskfile.split(":")[-1]
+        assert localfilepath.startswith("/")
+
+        identifier = event.taskfile + ":" + event.taskname
 
         recipe_information = self._get_recipe_information_from_taskfile(event.taskfile)
-        recipe = self.orm_wrapper.get_update_recipe_object(recipe_information)
+        recipe = self.orm_wrapper.get_update_recipe_object(recipe_information, True)
 
         task_information = self._get_task_information(event, recipe)
         task_information['outcome'] = Task.OUTCOME_NA
 
         if isinstance(event, bb.runqueue.runQueueTaskSkipped):
+            assert 'reason' in vars(event)
             task_information['task_executed'] = False
             if event.reason == "covered":
                 task_information['outcome'] = Task.OUTCOME_COVERED
@@ -458,7 +667,7 @@ class BuildInfoHelper(object):
             task_information['task_executed'] = True
             if 'noexec' in vars(event) and event.noexec == True:
                 task_information['task_executed'] = False
-                task_information['outcome'] = Task.OUTCOME_NA
+                task_information['outcome'] = Task.OUTCOME_EMPTY
                 task_information['script_type'] = Task.CODING_NA
 
         # do not assign order numbers to scene tasks
@@ -468,31 +677,57 @@ class BuildInfoHelper(object):
 
         task_obj = self.orm_wrapper.get_update_task_object(task_information)
 
-        self.internal_state[identifier] = {'start_time': datetime.datetime.now()}
+        self.internal_state['taskdata'][identifier] = {
+                        'outcome': task_information['outcome'],
+                    }
 
 
     def store_tasks_stats(self, event):
-        for (taskfile, taskname, taskstats) in event.data:
+        for (taskfile, taskname, taskstats, recipename) in event.data:
+            localfilepath = taskfile.split(":")[-1]
+            assert localfilepath.startswith("/")
+
             recipe_information = self._get_recipe_information_from_taskfile(taskfile)
-            recipe = self.orm_wrapper.get_update_recipe_object(recipe_information)
+            recipe_object = Recipe.objects.get(layer_version = recipe_information['layer_version'],
+                            file_path__endswith = recipe_information['file_path'],
+                            name = recipename)
 
             task_information = {}
             task_information['build'] = self.internal_state['build']
-            task_information['recipe'] = recipe
+            task_information['recipe'] = recipe_object
             task_information['task_name'] = taskname
             task_information['cpu_usage'] = taskstats['cpu_usage']
             task_information['disk_io'] = taskstats['disk_io']
-            task_obj = self.orm_wrapper.get_update_task_object(task_information)
+            task_obj = self.orm_wrapper.get_update_task_object(task_information, True)  # must exist
 
     def update_and_store_task(self, event):
-        identifier = event.taskfile + event.taskname
-        recipe_information = self._get_recipe_information_from_taskfile(event.taskfile)
-        recipe = self.orm_wrapper.get_update_recipe_object(recipe_information)
+        assert 'taskfile' in vars(event)
+        localfilepath = event.taskfile.split(":")[-1]
+        assert localfilepath.startswith("/")
+
+        identifier = event.taskfile + ":" + event.taskname
+        if not identifier in self.internal_state['taskdata']:
+            if isinstance(event, bb.build.TaskBase):
+                # we do a bit of guessing
+                candidates = [x for x in self.internal_state['taskdata'].keys() if x.endswith(identifier)]
+                if len(candidates) == 1:
+                    identifier = candidates[0]
+
+        assert identifier in self.internal_state['taskdata']
+        identifierlist = identifier.split(":")
+        realtaskfile = ":".join(identifierlist[0:len(identifierlist)-1])
+        recipe_information = self._get_recipe_information_from_taskfile(realtaskfile)
+        recipe = self.orm_wrapper.get_update_recipe_object(recipe_information, True)
         task_information = self._get_task_information(event,recipe)
-        try:
-            task_information['start_time'] = self.internal_state[identifier]['start_time']
-        except:
-            pass
+
+        if 'time' in vars(event):
+            if not 'start_time' in self.internal_state['taskdata'][identifier]:
+                self.internal_state['taskdata'][identifier]['start_time'] = event.time
+            else:
+                task_information['end_time'] = event.time
+                task_information['start_time'] = self.internal_state['taskdata'][identifier]['start_time']
+
+        task_information['outcome'] = self.internal_state['taskdata'][identifier]['outcome']
 
         if 'logfile' in vars(event):
             task_information['logfile'] = event.logfile
@@ -507,26 +742,79 @@ class BuildInfoHelper(object):
             else:
                 task_information['script_type'] = Task.CODING_SHELL
 
-        if isinstance(event, (bb.runqueue.runQueueTaskCompleted, bb.runqueue.sceneQueueTaskCompleted)):
-            task_information['outcome'] = Task.OUTCOME_SUCCESS
-            del self.internal_state[identifier]
+        if task_information['outcome'] == Task.OUTCOME_NA:
+            if isinstance(event, (bb.runqueue.runQueueTaskCompleted, bb.runqueue.sceneQueueTaskCompleted)):
+                task_information['outcome'] = Task.OUTCOME_SUCCESS
+                del self.internal_state['taskdata'][identifier]
 
-        if isinstance(event, (bb.runqueue.runQueueTaskFailed, bb.runqueue.sceneQueueTaskFailed)):
-            task_information['outcome'] = Task.OUTCOME_FAILED
-            del self.internal_state[identifier]
+            if isinstance(event, (bb.runqueue.runQueueTaskFailed, bb.runqueue.sceneQueueTaskFailed)):
+                task_information['outcome'] = Task.OUTCOME_FAILED
+                del self.internal_state['taskdata'][identifier]
 
-        self.orm_wrapper.get_update_task_object(task_information)
+        self.orm_wrapper.get_update_task_object(task_information, True) # must exist
+
+
+    def store_missed_state_tasks(self, event):
+        for (fn, taskname, taskhash, sstatefile) in event.data['missed']:
+
+            identifier = fn + taskname + "_setscene"
+            recipe_information = self._get_recipe_information_from_taskfile(fn)
+            recipe = self.orm_wrapper.get_update_recipe_object(recipe_information)
+            class MockEvent: pass
+            mevent = MockEvent()
+            mevent.taskname = taskname
+            mevent.taskhash = taskhash
+            task_information = self._get_task_information(mevent,recipe)
+
+            task_information['start_time'] = datetime.datetime.now()
+            task_information['outcome'] = Task.OUTCOME_NA
+            task_information['sstate_checksum'] = taskhash
+            task_information['sstate_result'] = Task.SSTATE_MISS
+            task_information['path_to_sstate_obj'] = sstatefile
+
+            self.orm_wrapper.get_update_task_object(task_information)
+
+        for (fn, taskname, taskhash, sstatefile) in event.data['found']:
+
+            identifier = fn + taskname + "_setscene"
+            recipe_information = self._get_recipe_information_from_taskfile(fn)
+            recipe = self.orm_wrapper.get_update_recipe_object(recipe_information)
+            class MockEvent: pass
+            mevent = MockEvent()
+            mevent.taskname = taskname
+            mevent.taskhash = taskhash
+            task_information = self._get_task_information(mevent,recipe)
+
+            task_information['path_to_sstate_obj'] = sstatefile
+
+            self.orm_wrapper.get_update_task_object(task_information)
 
 
     def store_target_package_data(self, event):
+        assert 'data' in vars(event)
         # for all image targets
         for target in self.internal_state['targets']:
             if target.is_image:
-                pkgdata = event.data['pkgdata']
-                imgdata = event.data['imgdata'][target.target]
-                self.orm_wrapper.save_target_package_information(self.internal_state['build'], target, imgdata, pkgdata, self.internal_state['recipes'])
+                try:
+                    pkgdata = event.data['pkgdata']
+                    imgdata = event.data['imgdata'][target.target]
+                    self.orm_wrapper.save_target_package_information(self.internal_state['build'], target, imgdata, pkgdata, self.internal_state['recipes'])
+                    filedata = event.data['filedata'][target.target]
+                    self.orm_wrapper.save_target_file_information(self.internal_state['build'], target, filedata)
+                except KeyError:
+                    # we must have not got the data for this image, nothing to save
+                    pass
+
+
 
     def store_dependency_information(self, event):
+        assert '_depgraph' in vars(event)
+        assert 'layer-priorities' in event._depgraph
+        assert 'pn' in event._depgraph
+        assert 'tdepends' in event._depgraph
+
+        errormsg = ""
+
         # save layer version priorities
         if 'layer-priorities' in event._depgraph.keys():
             for lv in event._depgraph['layer-priorities']:
@@ -540,8 +828,8 @@ class BuildInfoHelper(object):
         self.internal_state['recipes'] = {}
         for pn in event._depgraph['pn']:
 
-            file_name = re.split(':', event._depgraph['pn'][pn]['filename'])[-1]
-            layer_version_obj = self._get_layer_version_for_path(re.split(':', file_name)[-1])
+            file_name = event._depgraph['pn'][pn]['filename']
+            layer_version_obj = self._get_layer_version_for_path(file_name.split(":")[-1])
 
             assert layer_version_obj is not None
 
@@ -553,15 +841,16 @@ class BuildInfoHelper(object):
             recipe_info['license'] = event._depgraph['pn'][pn]['license']
             recipe_info['description'] = event._depgraph['pn'][pn]['description']
             recipe_info['section'] = event._depgraph['pn'][pn]['section']
-            recipe_info['licensing_info'] = 'Not Available'
             recipe_info['homepage'] = event._depgraph['pn'][pn]['homepage']
             recipe_info['bugtracker'] = event._depgraph['pn'][pn]['bugtracker']
             recipe_info['file_path'] = file_name
             recipe = self.orm_wrapper.get_update_recipe_object(recipe_info)
+            recipe.is_image = False
             if 'inherits' in event._depgraph['pn'][pn].keys():
-                recipe.is_image = True in map(lambda x: x.endswith('image.bbclass'), event._depgraph['pn'][pn]['inherits'])
-            else:
-                recipe.is_image = False
+                for cls in event._depgraph['pn'][pn]['inherits']:
+                    if cls.endswith('/image.bbclass'):
+                        recipe.is_image = True
+                        break
             if recipe.is_image:
                 for t in self.internal_state['targets']:
                     if pn == t.target:
@@ -569,6 +858,10 @@ class BuildInfoHelper(object):
                         t.save()
             self.internal_state['recipes'][pn] = recipe
 
+        # we'll not get recipes for key w/ values listed in ASSUME_PROVIDED
+
+        assume_provided = self.server.runCommand(["getVariable", "ASSUME_PROVIDED"])[0].split()
+
         # save recipe dependency
         # buildtime
         for recipe in event._depgraph['depends']:
@@ -578,20 +871,9 @@ class BuildInfoHelper(object):
                     dependency = self.internal_state['recipes'][dep]
                     Recipe_Dependency.objects.get_or_create( recipe = target,
                             depends_on = dependency, dep_type = Recipe_Dependency.TYPE_DEPENDS)
-            except KeyError:    # we'll not get recipes for key w/ values listed in ASSUME_PROVIDED
-                pass
-
-        # runtime
-        for recipe in event._depgraph['rdepends-pn']:
-            try:
-                target = self.internal_state['recipes'][recipe]
-                for dep in event._depgraph['rdepends-pn'][recipe]:
-                    dependency = self.internal_state['recipes'][dep]
-                    Recipe_Dependency.objects.get_or_create( recipe = target,
-                            depends_on = dependency, dep_type = Recipe_Dependency.TYPE_RDEPENDS)
-
-            except KeyError:    # we'll not get recipes for key w/ values listed in ASSUME_PROVIDED
-                pass
+            except KeyError as e:
+                if e not in assume_provided and not str(e).startswith("virtual/"):
+                    errormsg += "  stpd: KeyError saving recipe dependency for %s, %s \n" % (recipe, e)
 
         # save all task information
         def _save_a_task(taskdesc):
@@ -606,13 +888,28 @@ class BuildInfoHelper(object):
             task_obj = self.orm_wrapper.get_update_task_object(task_info)
             return task_obj
 
+        # create tasks
+        tasks = {}
         for taskdesc in event._depgraph['tdepends']:
-            target = _save_a_task(taskdesc)
-            for taskdesc1 in event._depgraph['tdepends'][taskdesc]:
-                dep = _save_a_task(taskdesc1)
+            tasks[taskdesc] = _save_a_task(taskdesc)
+
+        # create dependencies between tasks
+        for taskdesc in event._depgraph['tdepends']:
+            target = tasks[taskdesc]
+            for taskdep in event._depgraph['tdepends'][taskdesc]:
+                if taskdep not in tasks:
+                    # Fetch tasks info is not collected previously
+                    dep = _save_a_task(taskdep)
+                else:
+                    dep = tasks[taskdep]
                 Task_Dependency.objects.get_or_create( task = target, depends_on = dep )
 
+        if (len(errormsg) > 0):
+            raise Exception(errormsg)
+
+
     def store_build_package_information(self, event):
+        assert 'data' in vars(event)
         package_info = event.data
         self.orm_wrapper.save_build_package_information(self.internal_state['build'],
                             package_info,
@@ -636,16 +933,23 @@ class BuildInfoHelper(object):
         self._store_log_information(LogMessage.ERROR, text)
 
     def store_log_event(self, event):
-        # look up license files info from insane.bbclass
-        m = re.match("([^:]*): md5 checksum matched for ([^;]*)", event.msg)
-        if m:
-            (pn, fn) = m.groups()
-            self.internal_state['recipes'][pn].licensing_info = fn
-            self.internal_state['recipes'][pn].save()
+        if 'build' in self.internal_state and 'backlog' in self.internal_state:
+            if len(self.internal_state['backlog']):
+                tempevent = self.internal_state['backlog'].pop()
+                print "Saving stored event ", tempevent
+                self.store_log_event(tempevent)
+            else:
+                del self.internal_state['backlog']
 
         if event.levelno < format.WARNING:
             return
+
         if not 'build' in self.internal_state:
+            print "Save event for later"
+            if not 'backlog' in self.internal_state:
+                self.internal_state['backlog'] = []
+            self.internal_state['backlog'].append(event)
+
             return
         log_information = {}
         log_information['build'] = self.internal_state['build']

bitbake/lib/bb/ui/crumbs/builder.py

@@ -380,7 +380,6 @@ class Builder(gtk.Window):
         super(Builder, self).__init__()
 
         self.hob_image = "hob-image"
-        self.hob_toolchain = "hob-toolchain"
 
         # handler
         self.handler = hobHandler
@@ -447,6 +446,7 @@ class Builder(gtk.Window):
         self.handler.connect("recipe-populated",         self.handler_recipe_populated_cb)
         self.handler.connect("package-populated",        self.handler_package_populated_cb)
 
+        self.handler.append_to_bbfiles("${TOPDIR}/recipes/images/custom/*.bb")
         self.handler.append_to_bbfiles("${TOPDIR}/recipes/images/*.bb")
         self.initiate_new_build_async()
 
@@ -597,7 +597,6 @@ class Builder(gtk.Window):
             image = self.configuration.selected_image
         self.handler.generate_image(image,
                                     base_image,
-                                    self.hob_toolchain,
                                     packages,
                                     toolchain_packages,
                                     self.configuration.default_task)
@@ -739,6 +738,11 @@ class Builder(gtk.Window):
             self.configuration.update(params)
             self.parameters.update(params)
 
+    def set_base_image(self):
+        self.configuration.initial_selected_image = self.configuration.selected_image
+        if self.configuration.selected_image != self.recipe_model.__custom_image__:
+            self.hob_image = self.configuration.selected_image + "-edited"
+
     def reset(self):
         self.configuration.curr_mach = ""
         self.configuration.clear_selection()
@@ -963,7 +967,7 @@ class Builder(gtk.Window):
             if selected_image == self.recipe_model.__custom_image__:
                 if self.configuration.initial_selected_image != selected_image:
                     version = self.recipe_model.get_custom_image_version()
-                linkname = 'hob-image' + version+ "-" + self.configuration.curr_mach
+                linkname = self.hob_image + version + "-" + self.configuration.curr_mach
             else:
                 linkname = selected_image + '-' + self.configuration.curr_mach
             image_extension = self.get_image_extension()

bitbake/lib/bb/ui/crumbs/hig/deployimagedialog.py

@@ -167,7 +167,7 @@ class DeployImageDialog (CrumbsDialog):
                 if cmdline:
                     tmpfile = tempfile.NamedTemporaryFile()
                     cmdline += "\"sudo dd if=" + self.image_path + \
-                                " of=" + combo_item + "; echo $? > " + tmpfile.name + "\""
+                                " of=" + combo_item + " && sync; echo $? > " + tmpfile.name + "\""
                     subprocess.call(shlex.split(cmdline))
 
                     if int(tmpfile.readline().strip()) == 0:

bitbake/lib/bb/ui/crumbs/hobeventhandler.py

@@ -164,19 +164,24 @@ class HobHandler(gobject.GObject):
         elif next_command == self.SUB_BUILD_IMAGE:
             self.clear_busy()
             self.building = True
-            targets = [self.image]
-            if self.toolchain_packages:
-                self.set_var_in_file("TOOLCHAIN_TARGET_TASK", " ".join(self.toolchain_packages), "local.conf")
-                targets.append(self.toolchain)
-            if targets[0] == "hob-image":
+            target = self.image
+
+            if self.base_image:
+                # Request the build of a custom image
+                self.generate_hob_base_image(target)
                 self.set_var_in_file("LINGUAS_INSTALL", "", "local.conf")
-                hobImage = self.runCommand(["matchFile", "hob-image.bb"])
-                if self.base_image != "Start with an empty image recipe":
+                hobImage = self.runCommand(["matchFile", target + ".bb"])
+                if self.base_image != self.recipe_model.__custom_image__:
                     baseImage = self.runCommand(["matchFile", self.base_image + ".bb"])
                     version = self.runCommand(["generateNewImage", hobImage, baseImage, self.package_queue, True, ""])
-                    targets[0] += version
+                    target += version
                     self.recipe_model.set_custom_image_version(version)
 
+            targets = [target]
+            if self.toolchain_packages:
+                self.set_var_in_file("TOOLCHAIN_TARGET_TASK", " ".join(self.toolchain_packages), "local.conf")
+                targets.append(target + ":do_populate_sdk")
+
             self.runCommand(["buildTargets", targets, self.default_task])
 
     def display_error(self):
@@ -355,20 +360,32 @@ class HobHandler(gobject.GObject):
         self.set_var_in_file("EXTRA_SETTING", extra_setting, "local.conf")
 
     def set_extra_config(self, extra_setting):
-        old_extra_setting = ast.literal_eval(self.runCommand(["getVariable", "EXTRA_SETTING"]) or "{}")
-        if extra_setting:
-            self.set_var_in_file("EXTRA_SETTING", extra_setting, "local.conf")
-        else:
-            self.remove_var_from_file("EXTRA_SETTING")
+        old_extra_setting = self.runCommand(["getVariable", "EXTRA_SETTING"]) or {}
+        old_extra_setting = str(old_extra_setting)
 
-        #remove not needed settings from conf
-        for key in old_extra_setting:
+        old_extra_setting = ast.literal_eval(old_extra_setting)
+        if not type(old_extra_setting) == dict:
+            old_extra_setting = {}
+
+        # settings not changed
+        if old_extra_setting == extra_setting:
+            return
+
+        # remove the old EXTRA SETTING variable
+        self.remove_var_from_file("EXTRA_SETTING")
+
+        # remove old settings from conf
+        for key in old_extra_setting.keys():
             if key not in extra_setting:
                 self.remove_var_from_file(key)
-        for key in extra_setting.keys():
-            value = extra_setting[key]
+
+        # add new settings
+        for key, value in extra_setting.iteritems():
             self.set_var_in_file(key, value, "local.conf")
 
+        if extra_setting:
+            self.set_var_in_file("EXTRA_SETTING", extra_setting, "local.conf")
+
     def set_http_proxy(self, http_proxy):
         self.set_var_in_file("http_proxy", http_proxy, "local.conf")
 
@@ -423,10 +440,9 @@ class HobHandler(gobject.GObject):
         self.commands_async.append(self.SUB_BUILD_RECIPES)
         self.run_next_command(self.GENERATE_PACKAGES)
 
-    def generate_image(self, image, base_image, toolchain, image_packages=[], toolchain_packages=[], default_task="build"):
+    def generate_image(self, image, base_image, image_packages=[], toolchain_packages=[], default_task="build"):
         self.image = image
         self.base_image = base_image
-        self.toolchain = toolchain
         self.package_queue = image_packages
         self.toolchain_packages = toolchain_packages
         self.default_task = default_task
@@ -436,9 +452,16 @@ class HobHandler(gobject.GObject):
         self.run_next_command(self.GENERATE_IMAGE)
 
     def generate_new_image(self, image, base_image, package_queue, description):
-        base_image = self.runCommand(["matchFile", self.base_image + ".bb"])
+        if base_image:
+            base_image = self.runCommand(["matchFile", self.base_image + ".bb"])
         self.runCommand(["generateNewImage", image, base_image, package_queue, False, description])
 
+    def generate_hob_base_image(self, hob_image):
+        image_dir = self.get_topdir() + "/recipes/images/"
+        recipe_name = hob_image + ".bb"
+        self.ensure_dir(image_dir)
+        self.generate_new_image(image_dir + recipe_name, None, [], "")
+
     def ensure_dir(self, directory):
         self.runCommand(["ensureDir", directory])
 
@@ -498,19 +521,14 @@ class HobHandler(gobject.GObject):
         bbfiles = self.runCommand(["getVariable", "BBFILES", "False"]) or ""
         bbfiles = bbfiles.split()
         if val not in bbfiles:
-            self.append_var_in_file("BBFILES", val, "local.conf")
+            self.append_var_in_file("BBFILES", val, "bblayers.conf")
 
     def get_parameters(self):
         # retrieve the parameters from bitbake
         params = {}
         params["core_base"] = self.runCommand(["getVariable", "COREBASE"]) or ""
-        hob_layer = params["core_base"] + "/meta-hob"
         params["layer"] = self.runCommand(["getVariable", "BBLAYERS"]) or ""
         params["layers_non_removable"] = self.runCommand(["getVariable", "BBLAYERS_NON_REMOVABLE"]) or ""
-        if hob_layer not in params["layer"].split():
-            params["layer"] += (" " + hob_layer)
-        if hob_layer not in params["layers_non_removable"].split():
-            params["layers_non_removable"] += (" " + hob_layer)
         params["dldir"] = self.runCommand(["getVariable", "DL_DIR"]) or ""
         params["machine"] = self.runCommand(["getVariable", "MACHINE"]) or ""
         params["distro"] = self.runCommand(["getVariable", "DISTRO"]) or "defaultsetup"

bitbake/lib/bb/ui/crumbs/hoblistmodel.py

@@ -703,8 +703,8 @@ class RecipeListModel(gtk.ListStore):
 
             if ('packagegroup.bbclass' in " ".join(inherits)):
                 atype = 'packagegroup'
-            elif ('image.bbclass' in " ".join(inherits)):
-                if name != "hob-image":
+            elif ('/image.bbclass' in " ".join(inherits)):
+                if "edited" not in name:
                     atype = 'image'
                     install = event_model["rdepends-pkg"].get(item, []) + event_model["rrecs-pkg"].get(item, [])
             elif ('meta-' in name):

bitbake/lib/bb/ui/crumbs/imageconfigurationpage.py

@@ -379,7 +379,7 @@ class ImageConfigurationPage (HobPage):
         selected_image = self.image_combo.get_active_text()
         if selected_image == self.__custom_image__:
             topdir = self.builder.get_topdir()
-            images_dir = topdir + "/recipes/images/"
+            images_dir = topdir + "/recipes/images/custom/"
             self.builder.ensure_dir(images_dir)
 
             dialog = RetrieveImageDialog(images_dir, "Select from my image recipes",
@@ -459,6 +459,7 @@ class ImageConfigurationPage (HobPage):
             for i in self.builder.parameters.image_black_pattern.split():
                 black_pattern.append(re.compile(i))
         black_pattern.append(re.compile("hob-image"))
+        black_pattern.append(re.compile("edited(-[0-9]*)*.bb$"))
 
         it = image_model.get_iter_first()
         self._image_combo_disconnect_signal()
@@ -545,7 +546,7 @@ class ImageConfigurationPage (HobPage):
         self.builder.just_bake()
 
     def edit_image_button_clicked_cb(self, button):
-        self.builder.configuration.initial_selected_image = self.builder.configuration.selected_image
+        self.builder.set_base_image()
         self.builder.show_recipes()
 
     def my_images_button_clicked_cb(self, button):

bitbake/lib/bb/ui/crumbs/imagedetailspage.py

@@ -632,7 +632,7 @@ class ImageDetailsPage (HobPage):
 
     def save_button_clicked_cb(self, button):
         topdir = self.builder.get_topdir()
-        images_dir = topdir + "/recipes/images/"
+        images_dir = topdir + "/recipes/images/custom/"
         self.builder.ensure_dir(images_dir)
 
         self.name_field_template = self.builder.image_configuration_page.custom_image_selected

bitbake/lib/bb/ui/crumbs/packageselectionpage.py

@@ -293,7 +293,7 @@ class PackageSelectionPage (HobPage):
         self.refresh_selection()
         if not self.builder.customized:
             self.builder.customized = True
-            self.builder.configuration.initial_selected_image = self.builder.configuration.selected_image
+            self.builder.set_base_image()
             self.builder.configuration.selected_image = self.recipe_model.__custom_image__
             self.builder.rcppkglist_populated()
 

bitbake/lib/bb/ui/knotty.py

@@ -31,8 +31,11 @@ import time
 import fcntl
 import struct
 import copy
+import atexit
 from bb.ui import uihelper
 
+featureSet = [bb.cooker.CookerFeatures.SEND_SANITYEVENTS]
+
 logger = logging.getLogger("BitBake")
 interactive = sys.stdout.isatty()
 
@@ -46,7 +49,7 @@ class BBProgress(progressbar.ProgressBar):
             self._resize_default = signal.getsignal(signal.SIGWINCH)
         except:
             self._resize_default = None
-        progressbar.ProgressBar.__init__(self, maxval, [self.msg + ": "] + widgets)
+        progressbar.ProgressBar.__init__(self, maxval, [self.msg + ": "] + widgets, fd=sys.stdout)
 
     def _handle_resize(self, signum, frame):
         progressbar.ProgressBar._handle_resize(self, signum, frame)
@@ -130,7 +133,7 @@ class TerminalFilter(object):
                 cr = (25, 80)
         return cr[1]
 
-    def __init__(self, main, helper, console, format):
+    def __init__(self, main, helper, console, errconsole, format):
         self.main = main
         self.helper = helper
         self.cuu = None
@@ -171,6 +174,7 @@ class TerminalFilter(object):
         except:
             self.cuu = None
         console.addFilter(InteractConsoleLogFilter(self, format))
+        errconsole.addFilter(InteractConsoleLogFilter(self, format))
 
     def clearFooter(self):
         if self.footer_present:
@@ -253,11 +257,15 @@ def main(server, eventHandler, params, tf = TerminalFilter):
     helper = uihelper.BBUIHelper()
 
     console = logging.StreamHandler(sys.stdout)
+    errconsole = logging.StreamHandler(sys.stderr)
     format_str = "%(levelname)s: %(message)s"
     format = bb.msg.BBLogFormatter(format_str)
-    bb.msg.addDefaultlogFilter(console)
+    bb.msg.addDefaultlogFilter(console, bb.msg.BBLogFilterStdOut)
+    bb.msg.addDefaultlogFilter(errconsole, bb.msg.BBLogFilterStdErr)
     console.setFormatter(format)
+    errconsole.setFormatter(format)
     logger.addHandler(console)
+    logger.addHandler(errconsole)
 
     if params.options.remote_server and params.options.kill_server:
         server.terminateServer()
@@ -302,23 +310,24 @@ def main(server, eventHandler, params, tf = TerminalFilter):
     warnings = 0
     taskfailures = []
 
-    termfilter = tf(main, helper, console, format)
+    termfilter = tf(main, helper, console, errconsole, format)
+    atexit.register(termfilter.finish)
 
     while True:
         try:
             event = eventHandler.waitEvent(0)
             if event is None:
+                if main.shutdown > 1:
+                    break
                 termfilter.updateFooter()
                 event = eventHandler.waitEvent(0.25)
             if event is None:
-                if main.shutdown > 1:
-                    break
                 continue
             helper.eventHandler(event)
             if isinstance(event, bb.runqueue.runQueueExitWait):
                 if not main.shutdown:
                     main.shutdown = 1
-
+                continue
             if isinstance(event, bb.event.LogExecTTY):
                 if log_exec_tty:
                     tries = event.retries
@@ -347,6 +356,9 @@ def main(server, eventHandler, params, tf = TerminalFilter):
                 logger.handle(event)
                 continue
 
+            if isinstance(event, bb.build.TaskFailedSilent):
+                logger.warn("Logfile for failed setscene task is %s" % event.logfile)
+                continue
             if isinstance(event, bb.build.TaskFailed):
                 return_value = 1
                 logfile = event.logfile
@@ -483,7 +495,6 @@ def main(server, eventHandler, params, tf = TerminalFilter):
                                   bb.event.RecipeParsed,
                                   bb.event.RecipePreFinalise,
                                   bb.runqueue.runQueueEvent,
-                                  bb.runqueue.runQueueExitWait,
                                   bb.event.OperationStarted,
                                   bb.event.OperationCompleted,
                                   bb.event.OperationProgress,
@@ -536,6 +547,4 @@ def main(server, eventHandler, params, tf = TerminalFilter):
         if return_value == 0:
             return_value = 1
 
-    termfilter.finish()
-
     return return_value

bitbake/lib/bb/ui/toasterui.py

@@ -143,6 +143,8 @@ def main(server, eventHandler, params ):
 
             # these events are unprocessed now, but may be used in the future to log
             # timing and error informations from the parsing phase in Toaster
+            if isinstance(event, (bb.event.SanityCheckPassed, bb.event.SanityCheck)):
+                continue
             if isinstance(event, bb.event.ParseStarted):
                 continue
             if isinstance(event, bb.event.ParseProgress):
@@ -209,7 +211,6 @@ def main(server, eventHandler, params ):
                 continue
 
             if isinstance(event, (bb.event.BuildCompleted)):
-                buildinfohelper.update_build_information(event, errors, warnings, taskfailures)
                 continue
 
             if isinstance(event, (bb.command.CommandCompleted,
@@ -235,14 +236,24 @@ def main(server, eventHandler, params ):
             if isinstance(event, bb.event.MetadataEvent):
                 if event.type == "SinglePackageInfo":
                     buildinfohelper.store_build_package_information(event)
-                if event.type == "LayerInfo":
+                elif event.type == "LayerInfo":
                     buildinfohelper.store_layer_info(event)
-                if event.type == "BuildStatsList":
+                elif event.type == "BuildStatsList":
                     buildinfohelper.store_tasks_stats(event)
-                if event.type == "ImagePkgList":
+                elif event.type == "ImagePkgList":
                     buildinfohelper.store_target_package_data(event)
+                elif event.type == "MissedSstate":
+                    buildinfohelper.store_missed_state_tasks(event)
+                elif event.type == "ImageFileSize":
+                    buildinfohelper.update_target_image_file(event)
+                elif event.type == "LicenseManifestPath":
+                    buildinfohelper.store_license_manifest_path(event)
                 continue
 
+            if isinstance(event, bb.cooker.CookerExit):
+                # exit when the server exits
+                break
+
             # ignore
             if isinstance(event, (bb.event.BuildBase,
                                   bb.event.StampUpdate,
@@ -252,8 +263,7 @@ def main(server, eventHandler, params ):
                                   bb.event.OperationProgress,
                                   bb.command.CommandFailed,
                                   bb.command.CommandExit,
-                                  bb.command.CommandCompleted,
-                                  bb.cooker.CookerExit)):
+                                  bb.command.CommandCompleted)):
                 continue
 
             if isinstance(event, bb.event.DepTreeGenerated):

bitbake/lib/bb/ui/uievent.py

@@ -28,7 +28,7 @@ import socket, threading, pickle
 from SimpleXMLRPCServer import SimpleXMLRPCServer, SimpleXMLRPCRequestHandler
 
 class BBUIEventQueue:
-    def __init__(self, BBServer, clientinfo=("localhost, 0"), featureset=[]):
+    def __init__(self, BBServer, clientinfo=("localhost, 0")):
 
         self.eventQueue = []
         self.eventQueueLock = threading.Lock()
@@ -44,7 +44,7 @@ class BBUIEventQueue:
         server.register_function( self.send_event, "event.sendpickle" )
         server.socket.settimeout(1)
 
-        self.EventHandle = self.BBServer.registerEventHandler(self.host, self.port, featureset)
+        self.EventHandle = self.BBServer.registerEventHandler(self.host, self.port)
 
         if (self.EventHandle == None):
             bb.fatal("Could not register UI event handler")

bitbake/lib/bb/utils.py

@@ -578,11 +578,30 @@ def build_environment(d):
         if export:
             os.environ[var] = d.getVar(var, True) or ""
 
+def _check_unsafe_delete_path(path):
+    """
+    Basic safeguard against recursively deleting something we shouldn't. If it returns True,
+    the caller should raise an exception with an appropriate message.
+    NOTE: This is NOT meant to be a security mechanism - just a guard against silly mistakes
+    with potentially disastrous results.
+    """
+    extra = ''
+    # HOME might not be /home/something, so in case we can get it, check against it
+    homedir = os.environ.get('HOME', '')
+    if homedir:
+        extra = '|%s' % homedir
+    if re.match('(/|//|/home|/home/[^/]*%s)$' % extra, os.path.abspath(path)):
+        return True
+    return False
+
 def remove(path, recurse=False):
     """Equivalent to rm -f or rm -rf"""
     if not path:
         return
     if recurse:
+        for name in glob.glob(path):
+            if _check_unsafe_delete_path(path):
+                raise Exception('bb.utils.remove: called with dangerous path "%s" and recurse=True, refusing to delete!' % path)
         # shutil.rmtree(name) would be ideal but its too slow
         subprocess.call(['rm', '-rf'] + glob.glob(path))
         return
@@ -596,6 +615,8 @@ def remove(path, recurse=False):
 def prunedir(topdir):
     # Delete everything reachable from the directory named in 'topdir'.
     # CAUTION:  This is dangerous!
+    if _check_unsafe_delete_path(topdir):
+        raise Exception('bb.utils.prunedir: called with dangerous path "%s", refusing to delete!' % topdir)
     for root, dirs, files in os.walk(topdir, topdown = False):
         for name in files:
             os.remove(os.path.join(root, name))

bitbake/lib/prserv/serv.py

@@ -275,17 +275,13 @@ def stop_daemon(host, port):
         PRServerConnection(host, port).terminate()
     except:
         logger.critical("Stop PRService %s:%d failed" % (host,port))
-    time.sleep(0.5)
 
     try:
         if pid:
-            if os.path.exists(pidfile):
-                os.remove(pidfile)
-
             wait_timeout = 0
-            while is_running(pid) and wait_timeout < 10:
-                print("Waiting for pr-server to exit.")
-                time.sleep(0.5)
+            print("Waiting for pr-server to exit.")
+            while is_running(pid) and wait_timeout < 50:
+                time.sleep(0.1)
                 wait_timeout += 1
 
             if is_running(pid):
@@ -293,6 +289,9 @@ def stop_daemon(host, port):
                 os.kill(pid,signal.SIGTERM)
                 time.sleep(0.1)
 
+            if os.path.exists(pidfile):
+                os.remove(pidfile)
+
     except OSError as e:
         err = str(e)
         if err.find("No such process") <= 0:

bitbake/lib/toaster/bldviewer/api.py

@@ -25,11 +25,13 @@ from django.conf.urls import patterns, include, url
 urlpatterns = patterns('bldviewer.views',
         url(r'^builds$', 'model_explorer',  {'model_name':'build'}, name='builds'),
         url(r'^targets$', 'model_explorer',  {'model_name':'target'}, name='targets'),
+        url(r'^target_files$', 'model_explorer',  {'model_name':'target_file'}, name='target_file'),
+        url(r'^target_image_file$', 'model_explorer',  {'model_name':'target_image_file'}, name='target_image_file'),
         url(r'^tasks$', 'model_explorer', {'model_name':'task'}, name='task'),
         url(r'^task_dependencies$', 'model_explorer',  {'model_name':'task_dependency'}, name='task_dependencies'),
         url(r'^packages$', 'model_explorer',  {'model_name':'package'}, name='package'),
         url(r'^package_dependencies$', 'model_explorer',  {'model_name':'package_dependency'}, name='package_dependency'),
-        url(r'^target_packages$', 'model_explorer',  {'model_name':'target_package'}, name='target_packages'),
+        url(r'^target_packages$', 'model_explorer',  {'model_name':'target_installed_package'}, name='target_packages'),
         url(r'^target_installed_packages$', 'model_explorer',  {'model_name':'target_installed_package'}, name='target_installed_package'),
         url(r'^package_files$', 'model_explorer',  {'model_name':'build_file'}, name='build_file'),
         url(r'^layers$', 'model_explorer', {'model_name':'layer'}, name='layer'),

bitbake/lib/toaster/bldviewer/templates/simple_build.html

@@ -31,7 +31,7 @@
             <td>{% time_difference build.started_on build.completed_on %}</td>
             <td>{{build.errors_no}}:{% if  build.errors_no %}{% for error in logs %}{% if error.build == build %}{% if error.level == 2 %}<p>{{error.message}}</p>{% endif %}{% endif %}{% endfor %}{% else %}None{% endif %}</td>
             <td>{{build.warnings_no}}:{% if  build.warnings_no %}{% for warning in logs %}{% if warning.build == build %}{% if warning.level == 1 %}<p>{{warning.message}}</p>{% endif %}{% endif %}{% endfor %}{% else %}None{% endif %}</td>
-            <td>{% if build.outcome == 0 %}{% for t in build.target_set.all %}{% if t.is_image %}{{build.image_fstypes}}{% endif %}{% endfor %}{% endif %}</td>
+            <td>TBD: determine image file list</td>
             <td>{{build.cooker_log_path}}</td>
             <td>{{build.bitbake_version}}</td>
             <td>{{build.build_name}}</td>

bitbake/lib/toaster/bldviewer/templates/simple_recipe.html

@@ -18,7 +18,6 @@
             <th>Description</th>
             <th>Section</th>
             <th>License</th>
-            <th>License file</th>
             <th>Homepage</th>
             <th>Bugtracker</th>
             <th>File_path</th>
@@ -34,7 +33,6 @@
             <td>{{recipe.description}}</td>
             <td>{{recipe.section}}</td>
             <td>{{recipe.license}}</td>
-            <td>{{recipe.licensing_info}}</td>
             <td>{{recipe.homepage}}</td>
             <td>{{recipe.bugtracker}}</td>
             <td>{{recipe.file_path}}</td>

bitbake/lib/toaster/bldviewer/views.py

@@ -25,7 +25,7 @@ from django.db.models import Q
 from django.shortcuts import render
 from orm.models import Build, Target, Task, Layer, Layer_Version, Recipe, LogMessage, Variable, Target_Installed_Package
 from orm.models import Task_Dependency, Recipe_Dependency, Package, Package_File, Package_Dependency
-from orm.models import Target_Installed_Package, VariableHistory
+from orm.models import Target_Installed_Package, VariableHistory, Target_Image_File, Target_File
 from django.views.decorators.cache import cache_control
 from django.core.paginator import Paginator, EmptyPage, PageNotAnInteger
 
@@ -159,6 +159,8 @@ def model_explorer(request, model_name):
     model_mapping = {
         'build': Build,
         'target': Target,
+        'target_file': Target_File,
+        'target_image_file': Target_Image_File,
         'task': Task,
         'task_dependency': Task_Dependency,
         'package': Package,

bitbake/lib/toaster/orm/migrations/0005_auto__add_target_image_file__add_target_file__add_field_variablehistor.py

@@ -0,0 +1,301 @@
+# -*- coding: utf-8 -*-
+from south.utils import datetime_utils as datetime
+from south.db import db
+from south.v2 import SchemaMigration
+from django.db import models
+
+
+class Migration(SchemaMigration):
+
+    def forwards(self, orm):
+        # Adding model 'Target_Image_File'
+        db.create_table(u'orm_target_image_file', (
+            (u'id', self.gf('django.db.models.fields.AutoField')(primary_key=True)),
+            ('target', self.gf('django.db.models.fields.related.ForeignKey')(to=orm['orm.Target'])),
+            ('file_name', self.gf('django.db.models.fields.FilePathField')(max_length=100)),
+            ('file_size', self.gf('django.db.models.fields.IntegerField')()),
+        ))
+        db.send_create_signal(u'orm', ['Target_Image_File'])
+
+        # Adding model 'Target_File'
+        db.create_table(u'orm_target_file', (
+            (u'id', self.gf('django.db.models.fields.AutoField')(primary_key=True)),
+            ('target', self.gf('django.db.models.fields.related.ForeignKey')(to=orm['orm.Target'])),
+            ('path', self.gf('django.db.models.fields.FilePathField')(max_length=100)),
+            ('size', self.gf('django.db.models.fields.IntegerField')()),
+            ('inodetype', self.gf('django.db.models.fields.IntegerField')()),
+            ('permission', self.gf('django.db.models.fields.IntegerField')()),
+            ('owner', self.gf('django.db.models.fields.CharField')(max_length=128)),
+            ('group', self.gf('django.db.models.fields.CharField')(max_length=128)),
+            ('directory', self.gf('django.db.models.fields.related.ForeignKey')(related_name='directory_set', to=orm['orm.Target_File'])),
+            ('sym_target', self.gf('django.db.models.fields.related.ForeignKey')(related_name='symlink_set', blank=True, to=orm['orm.Target_File'])),
+        ))
+        db.send_create_signal(u'orm', ['Target_File'])
+
+        # Adding field 'VariableHistory.value'
+        db.add_column(u'orm_variablehistory', 'value',
+                      self.gf('django.db.models.fields.TextField')(default='', blank=True),
+                      keep_default=False)
+
+        # Deleting field 'Recipe.licensing_info'
+        db.delete_column(u'orm_recipe', 'licensing_info')
+
+        # Deleting field 'Target.file_name'
+        db.delete_column(u'orm_target', 'file_name')
+
+        # Deleting field 'Target.file_size'
+        db.delete_column(u'orm_target', 'file_size')
+
+        # Deleting field 'Build.image_fstypes'
+        db.delete_column(u'orm_build', 'image_fstypes')
+
+        # Adding field 'Build.timespent'
+        db.add_column(u'orm_build', 'timespent',
+                      self.gf('django.db.models.fields.IntegerField')(default=0),
+                      keep_default=False)
+
+        # Adding field 'LogMessage.task'
+        db.add_column(u'orm_logmessage', 'task',
+                      self.gf('django.db.models.fields.related.ForeignKey')(to=orm['orm.Task'], null=True, blank=True),
+                      keep_default=False)
+
+
+        # Changing field 'Task.elapsed_time'
+        db.alter_column(u'orm_task', 'elapsed_time', self.gf('django.db.models.fields.DecimalField')(null=True, max_digits=6, decimal_places=2))
+        # Adding unique constraint on 'Task', fields ['build', 'recipe', 'task_name']
+        db.create_unique(u'orm_task', ['build_id', 'recipe_id', 'task_name'])
+
+
+    def backwards(self, orm):
+        # Removing unique constraint on 'Task', fields ['build', 'recipe', 'task_name']
+        db.delete_unique(u'orm_task', ['build_id', 'recipe_id', 'task_name'])
+
+        # Deleting model 'Target_Image_File'
+        db.delete_table(u'orm_target_image_file')
+
+        # Deleting model 'Target_File'
+        db.delete_table(u'orm_target_file')
+
+        # Deleting field 'VariableHistory.value'
+        db.delete_column(u'orm_variablehistory', 'value')
+
+        # Adding field 'Recipe.licensing_info'
+        db.add_column(u'orm_recipe', 'licensing_info',
+                      self.gf('django.db.models.fields.TextField')(default='', blank=True),
+                      keep_default=False)
+
+
+        # User chose to not deal with backwards NULL issues for 'Target.file_name'
+        raise RuntimeError("Cannot reverse this migration. 'Target.file_name' and its values cannot be restored.")
+        
+        # The following code is provided here to aid in writing a correct migration        # Adding field 'Target.file_name'
+        db.add_column(u'orm_target', 'file_name',
+                      self.gf('django.db.models.fields.CharField')(max_length=100),
+                      keep_default=False)
+
+
+        # User chose to not deal with backwards NULL issues for 'Target.file_size'
+        raise RuntimeError("Cannot reverse this migration. 'Target.file_size' and its values cannot be restored.")
+        
+        # The following code is provided here to aid in writing a correct migration        # Adding field 'Target.file_size'
+        db.add_column(u'orm_target', 'file_size',
+                      self.gf('django.db.models.fields.IntegerField')(),
+                      keep_default=False)
+
+
+        # User chose to not deal with backwards NULL issues for 'Build.image_fstypes'
+        raise RuntimeError("Cannot reverse this migration. 'Build.image_fstypes' and its values cannot be restored.")
+        
+        # The following code is provided here to aid in writing a correct migration        # Adding field 'Build.image_fstypes'
+        db.add_column(u'orm_build', 'image_fstypes',
+                      self.gf('django.db.models.fields.CharField')(max_length=100),
+                      keep_default=False)
+
+        # Deleting field 'Build.timespent'
+        db.delete_column(u'orm_build', 'timespent')
+
+        # Deleting field 'LogMessage.task'
+        db.delete_column(u'orm_logmessage', 'task_id')
+
+
+        # Changing field 'Task.elapsed_time'
+        db.alter_column(u'orm_task', 'elapsed_time', self.gf('django.db.models.fields.CharField')(max_length=50))
+
+    models = {
+        u'orm.build': {
+            'Meta': {'object_name': 'Build'},
+            'bitbake_version': ('django.db.models.fields.CharField', [], {'max_length': '50'}),
+            'build_name': ('django.db.models.fields.CharField', [], {'max_length': '100'}),
+            'completed_on': ('django.db.models.fields.DateTimeField', [], {}),
+            'cooker_log_path': ('django.db.models.fields.CharField', [], {'max_length': '500'}),
+            'distro': ('django.db.models.fields.CharField', [], {'max_length': '100'}),
+            'distro_version': ('django.db.models.fields.CharField', [], {'max_length': '100'}),
+            'errors_no': ('django.db.models.fields.IntegerField', [], {'default': '0'}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'machine': ('django.db.models.fields.CharField', [], {'max_length': '100'}),
+            'outcome': ('django.db.models.fields.IntegerField', [], {'default': '2'}),
+            'started_on': ('django.db.models.fields.DateTimeField', [], {}),
+            'timespent': ('django.db.models.fields.IntegerField', [], {'default': '0'}),
+            'warnings_no': ('django.db.models.fields.IntegerField', [], {'default': '0'})
+        },
+        u'orm.layer': {
+            'Meta': {'object_name': 'Layer'},
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'layer_index_url': ('django.db.models.fields.URLField', [], {'max_length': '200'}),
+            'local_path': ('django.db.models.fields.FilePathField', [], {'max_length': '255'}),
+            'name': ('django.db.models.fields.CharField', [], {'max_length': '100'})
+        },
+        u'orm.layer_version': {
+            'Meta': {'object_name': 'Layer_Version'},
+            'branch': ('django.db.models.fields.CharField', [], {'max_length': '50'}),
+            'build': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'layer_version_build'", 'to': u"orm['orm.Build']"}),
+            'commit': ('django.db.models.fields.CharField', [], {'max_length': '100'}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'layer': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'layer_version_layer'", 'to': u"orm['orm.Layer']"}),
+            'priority': ('django.db.models.fields.IntegerField', [], {})
+        },
+        u'orm.logmessage': {
+            'Meta': {'object_name': 'LogMessage'},
+            'build': ('django.db.models.fields.related.ForeignKey', [], {'to': u"orm['orm.Build']"}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'level': ('django.db.models.fields.IntegerField', [], {'default': '0'}),
+            'lineno': ('django.db.models.fields.IntegerField', [], {'null': 'True'}),
+            'message': ('django.db.models.fields.CharField', [], {'max_length': '240'}),
+            'pathname': ('django.db.models.fields.FilePathField', [], {'max_length': '255', 'blank': 'True'}),
+            'task': ('django.db.models.fields.related.ForeignKey', [], {'to': u"orm['orm.Task']", 'null': 'True', 'blank': 'True'})
+        },
+        u'orm.package': {
+            'Meta': {'object_name': 'Package'},
+            'build': ('django.db.models.fields.related.ForeignKey', [], {'to': u"orm['orm.Build']"}),
+            'description': ('django.db.models.fields.CharField', [], {'max_length': '200', 'blank': 'True'}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'installed_name': ('django.db.models.fields.CharField', [], {'default': "''", 'max_length': '100'}),
+            'installed_size': ('django.db.models.fields.IntegerField', [], {'default': '0'}),
+            'license': ('django.db.models.fields.CharField', [], {'max_length': '80', 'blank': 'True'}),
+            'name': ('django.db.models.fields.CharField', [], {'max_length': '100'}),
+            'recipe': ('django.db.models.fields.related.ForeignKey', [], {'to': u"orm['orm.Recipe']", 'null': 'True'}),
+            'revision': ('django.db.models.fields.CharField', [], {'max_length': '32', 'blank': 'True'}),
+            'section': ('django.db.models.fields.CharField', [], {'max_length': '80', 'blank': 'True'}),
+            'size': ('django.db.models.fields.IntegerField', [], {'default': '0'}),
+            'summary': ('django.db.models.fields.CharField', [], {'max_length': '200', 'blank': 'True'}),
+            'version': ('django.db.models.fields.CharField', [], {'max_length': '100', 'blank': 'True'})
+        },
+        u'orm.package_dependency': {
+            'Meta': {'object_name': 'Package_Dependency'},
+            'dep_type': ('django.db.models.fields.IntegerField', [], {}),
+            'depends_on': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'package_dependencies_target'", 'to': u"orm['orm.Package']"}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'package': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'package_dependencies_source'", 'to': u"orm['orm.Package']"}),
+            'target': ('django.db.models.fields.related.ForeignKey', [], {'to': u"orm['orm.Target']", 'null': 'True'})
+        },
+        u'orm.package_file': {
+            'Meta': {'object_name': 'Package_File'},
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'package': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'buildfilelist_package'", 'to': u"orm['orm.Package']"}),
+            'path': ('django.db.models.fields.FilePathField', [], {'max_length': '255', 'blank': 'True'}),
+            'size': ('django.db.models.fields.IntegerField', [], {})
+        },
+        u'orm.recipe': {
+            'Meta': {'object_name': 'Recipe'},
+            'bugtracker': ('django.db.models.fields.URLField', [], {'max_length': '200', 'blank': 'True'}),
+            'description': ('django.db.models.fields.CharField', [], {'max_length': '100', 'blank': 'True'}),
+            'file_path': ('django.db.models.fields.FilePathField', [], {'max_length': '255'}),
+            'homepage': ('django.db.models.fields.URLField', [], {'max_length': '200', 'blank': 'True'}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'layer_version': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'recipe_layer_version'", 'to': u"orm['orm.Layer_Version']"}),
+            'license': ('django.db.models.fields.CharField', [], {'max_length': '200', 'blank': 'True'}),
+            'name': ('django.db.models.fields.CharField', [], {'max_length': '100', 'blank': 'True'}),
+            'section': ('django.db.models.fields.CharField', [], {'max_length': '100', 'blank': 'True'}),
+            'summary': ('django.db.models.fields.CharField', [], {'max_length': '100', 'blank': 'True'}),
+            'version': ('django.db.models.fields.CharField', [], {'max_length': '100', 'blank': 'True'})
+        },
+        u'orm.recipe_dependency': {
+            'Meta': {'object_name': 'Recipe_Dependency'},
+            'dep_type': ('django.db.models.fields.IntegerField', [], {}),
+            'depends_on': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'r_dependencies_depends'", 'to': u"orm['orm.Recipe']"}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'recipe': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'r_dependencies_recipe'", 'to': u"orm['orm.Recipe']"})
+        },
+        u'orm.target': {
+            'Meta': {'object_name': 'Target'},
+            'build': ('django.db.models.fields.related.ForeignKey', [], {'to': u"orm['orm.Build']"}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'is_image': ('django.db.models.fields.BooleanField', [], {'default': 'False'}),
+            'target': ('django.db.models.fields.CharField', [], {'max_length': '100'})
+        },
+        u'orm.target_file': {
+            'Meta': {'object_name': 'Target_File'},
+            'directory': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'directory_set'", 'to': u"orm['orm.Target_File']"}),
+            'group': ('django.db.models.fields.CharField', [], {'max_length': '128'}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'inodetype': ('django.db.models.fields.IntegerField', [], {}),
+            'owner': ('django.db.models.fields.CharField', [], {'max_length': '128'}),
+            'path': ('django.db.models.fields.FilePathField', [], {'max_length': '100'}),
+            'permission': ('django.db.models.fields.IntegerField', [], {}),
+            'size': ('django.db.models.fields.IntegerField', [], {}),
+            'sym_target': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'symlink_set'", 'blank': 'True', 'to': u"orm['orm.Target_File']"}),
+            'target': ('django.db.models.fields.related.ForeignKey', [], {'to': u"orm['orm.Target']"})
+        },
+        u'orm.target_image_file': {
+            'Meta': {'object_name': 'Target_Image_File'},
+            'file_name': ('django.db.models.fields.FilePathField', [], {'max_length': '100'}),
+            'file_size': ('django.db.models.fields.IntegerField', [], {}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'target': ('django.db.models.fields.related.ForeignKey', [], {'to': u"orm['orm.Target']"})
+        },
+        u'orm.target_installed_package': {
+            'Meta': {'object_name': 'Target_Installed_Package'},
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'package': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'buildtargetlist_package'", 'to': u"orm['orm.Package']"}),
+            'target': ('django.db.models.fields.related.ForeignKey', [], {'to': u"orm['orm.Target']"})
+        },
+        u'orm.task': {
+            'Meta': {'ordering': "('order', 'recipe')", 'unique_together': "(('build', 'recipe', 'task_name'),)", 'object_name': 'Task'},
+            'build': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'task_build'", 'to': u"orm['orm.Build']"}),
+            'cpu_usage': ('django.db.models.fields.DecimalField', [], {'null': 'True', 'max_digits': '6', 'decimal_places': '2'}),
+            'disk_io': ('django.db.models.fields.IntegerField', [], {'null': 'True'}),
+            'elapsed_time': ('django.db.models.fields.DecimalField', [], {'null': 'True', 'max_digits': '6', 'decimal_places': '2'}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'line_number': ('django.db.models.fields.IntegerField', [], {'default': '0'}),
+            'logfile': ('django.db.models.fields.FilePathField', [], {'max_length': '255', 'blank': 'True'}),
+            'message': ('django.db.models.fields.CharField', [], {'max_length': '240'}),
+            'order': ('django.db.models.fields.IntegerField', [], {'null': 'True'}),
+            'outcome': ('django.db.models.fields.IntegerField', [], {'default': '-1'}),
+            'path_to_sstate_obj': ('django.db.models.fields.FilePathField', [], {'max_length': '500', 'blank': 'True'}),
+            'recipe': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'build_recipe'", 'to': u"orm['orm.Recipe']"}),
+            'script_type': ('django.db.models.fields.IntegerField', [], {'default': '0'}),
+            'source_url': ('django.db.models.fields.FilePathField', [], {'max_length': '255', 'blank': 'True'}),
+            'sstate_checksum': ('django.db.models.fields.CharField', [], {'max_length': '100', 'blank': 'True'}),
+            'sstate_result': ('django.db.models.fields.IntegerField', [], {'default': '0'}),
+            'task_executed': ('django.db.models.fields.BooleanField', [], {'default': 'False'}),
+            'task_name': ('django.db.models.fields.CharField', [], {'max_length': '100'}),
+            'work_directory': ('django.db.models.fields.FilePathField', [], {'max_length': '255', 'blank': 'True'})
+        },
+        u'orm.task_dependency': {
+            'Meta': {'object_name': 'Task_Dependency'},
+            'depends_on': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'task_dependencies_depends'", 'to': u"orm['orm.Task']"}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'task': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'task_dependencies_task'", 'to': u"orm['orm.Task']"})
+        },
+        u'orm.variable': {
+            'Meta': {'object_name': 'Variable'},
+            'build': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'variable_build'", 'to': u"orm['orm.Build']"}),
+            'changed': ('django.db.models.fields.BooleanField', [], {'default': 'False'}),
+            'description': ('django.db.models.fields.TextField', [], {'blank': 'True'}),
+            'human_readable_name': ('django.db.models.fields.CharField', [], {'max_length': '200'}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'variable_name': ('django.db.models.fields.CharField', [], {'max_length': '100'}),
+            'variable_value': ('django.db.models.fields.TextField', [], {'blank': 'True'})
+        },
+        u'orm.variablehistory': {
+            'Meta': {'object_name': 'VariableHistory'},
+            'file_name': ('django.db.models.fields.FilePathField', [], {'max_length': '255'}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'line_number': ('django.db.models.fields.IntegerField', [], {'null': 'True'}),
+            'operation': ('django.db.models.fields.CharField', [], {'max_length': '16'}),
+            'value': ('django.db.models.fields.TextField', [], {'blank': 'True'}),
+            'variable': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'vhistory'", 'to': u"orm['orm.Variable']"})
+        }
+    }
+
+    complete_apps = ['orm']

bitbake/lib/toaster/orm/migrations/0006_auto__add_field_target_image_size__add_field_target_license_manifest_p.py

@@ -0,0 +1,235 @@
+# -*- coding: utf-8 -*-
+from south.utils import datetime_utils as datetime
+from south.db import db
+from south.v2 import SchemaMigration
+from django.db import models
+
+
+class Migration(SchemaMigration):
+
+    def forwards(self, orm):
+        # Adding field 'Target.image_size'
+        db.add_column(u'orm_target', 'image_size',
+                      self.gf('django.db.models.fields.IntegerField')(default=0),
+                      keep_default=False)
+
+        # Adding field 'Target.license_manifest_path'
+        db.add_column(u'orm_target', 'license_manifest_path',
+                      self.gf('django.db.models.fields.CharField')(max_length=500, null=True),
+                      keep_default=False)
+
+
+        # Changing field 'Target_File.permission'
+        db.alter_column(u'orm_target_file', 'permission', self.gf('django.db.models.fields.CharField')(max_length=16))
+
+        # Changing field 'Target_File.sym_target'
+        db.alter_column(u'orm_target_file', 'sym_target_id', self.gf('django.db.models.fields.related.ForeignKey')(null=True, to=orm['orm.Target_File']))
+
+        # Changing field 'Target_File.directory'
+        db.alter_column(u'orm_target_file', 'directory_id', self.gf('django.db.models.fields.related.ForeignKey')(null=True, to=orm['orm.Target_File']))
+
+    def backwards(self, orm):
+        # Deleting field 'Target.image_size'
+        db.delete_column(u'orm_target', 'image_size')
+
+        # Deleting field 'Target.license_manifest_path'
+        db.delete_column(u'orm_target', 'license_manifest_path')
+
+
+        # Changing field 'Target_File.permission'
+        db.alter_column(u'orm_target_file', 'permission', self.gf('django.db.models.fields.IntegerField')())
+
+        # User chose to not deal with backwards NULL issues for 'Target_File.sym_target'
+        raise RuntimeError("Cannot reverse this migration. 'Target_File.sym_target' and its values cannot be restored.")
+        
+        # The following code is provided here to aid in writing a correct migration
+        # Changing field 'Target_File.sym_target'
+        db.alter_column(u'orm_target_file', 'sym_target_id', self.gf('django.db.models.fields.related.ForeignKey')(to=orm['orm.Target_File']))
+
+        # User chose to not deal with backwards NULL issues for 'Target_File.directory'
+        raise RuntimeError("Cannot reverse this migration. 'Target_File.directory' and its values cannot be restored.")
+        
+        # The following code is provided here to aid in writing a correct migration
+        # Changing field 'Target_File.directory'
+        db.alter_column(u'orm_target_file', 'directory_id', self.gf('django.db.models.fields.related.ForeignKey')(to=orm['orm.Target_File']))
+
+    models = {
+        u'orm.build': {
+            'Meta': {'object_name': 'Build'},
+            'bitbake_version': ('django.db.models.fields.CharField', [], {'max_length': '50'}),
+            'build_name': ('django.db.models.fields.CharField', [], {'max_length': '100'}),
+            'completed_on': ('django.db.models.fields.DateTimeField', [], {}),
+            'cooker_log_path': ('django.db.models.fields.CharField', [], {'max_length': '500'}),
+            'distro': ('django.db.models.fields.CharField', [], {'max_length': '100'}),
+            'distro_version': ('django.db.models.fields.CharField', [], {'max_length': '100'}),
+            'errors_no': ('django.db.models.fields.IntegerField', [], {'default': '0'}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'machine': ('django.db.models.fields.CharField', [], {'max_length': '100'}),
+            'outcome': ('django.db.models.fields.IntegerField', [], {'default': '2'}),
+            'started_on': ('django.db.models.fields.DateTimeField', [], {}),
+            'timespent': ('django.db.models.fields.IntegerField', [], {'default': '0'}),
+            'warnings_no': ('django.db.models.fields.IntegerField', [], {'default': '0'})
+        },
+        u'orm.layer': {
+            'Meta': {'object_name': 'Layer'},
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'layer_index_url': ('django.db.models.fields.URLField', [], {'max_length': '200'}),
+            'local_path': ('django.db.models.fields.FilePathField', [], {'max_length': '255'}),
+            'name': ('django.db.models.fields.CharField', [], {'max_length': '100'})
+        },
+        u'orm.layer_version': {
+            'Meta': {'object_name': 'Layer_Version'},
+            'branch': ('django.db.models.fields.CharField', [], {'max_length': '50'}),
+            'build': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'layer_version_build'", 'to': u"orm['orm.Build']"}),
+            'commit': ('django.db.models.fields.CharField', [], {'max_length': '100'}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'layer': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'layer_version_layer'", 'to': u"orm['orm.Layer']"}),
+            'priority': ('django.db.models.fields.IntegerField', [], {})
+        },
+        u'orm.logmessage': {
+            'Meta': {'object_name': 'LogMessage'},
+            'build': ('django.db.models.fields.related.ForeignKey', [], {'to': u"orm['orm.Build']"}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'level': ('django.db.models.fields.IntegerField', [], {'default': '0'}),
+            'lineno': ('django.db.models.fields.IntegerField', [], {'null': 'True'}),
+            'message': ('django.db.models.fields.CharField', [], {'max_length': '240'}),
+            'pathname': ('django.db.models.fields.FilePathField', [], {'max_length': '255', 'blank': 'True'}),
+            'task': ('django.db.models.fields.related.ForeignKey', [], {'to': u"orm['orm.Task']", 'null': 'True', 'blank': 'True'})
+        },
+        u'orm.package': {
+            'Meta': {'object_name': 'Package'},
+            'build': ('django.db.models.fields.related.ForeignKey', [], {'to': u"orm['orm.Build']"}),
+            'description': ('django.db.models.fields.CharField', [], {'max_length': '200', 'blank': 'True'}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'installed_name': ('django.db.models.fields.CharField', [], {'default': "''", 'max_length': '100'}),
+            'installed_size': ('django.db.models.fields.IntegerField', [], {'default': '0'}),
+            'license': ('django.db.models.fields.CharField', [], {'max_length': '80', 'blank': 'True'}),
+            'name': ('django.db.models.fields.CharField', [], {'max_length': '100'}),
+            'recipe': ('django.db.models.fields.related.ForeignKey', [], {'to': u"orm['orm.Recipe']", 'null': 'True'}),
+            'revision': ('django.db.models.fields.CharField', [], {'max_length': '32', 'blank': 'True'}),
+            'section': ('django.db.models.fields.CharField', [], {'max_length': '80', 'blank': 'True'}),
+            'size': ('django.db.models.fields.IntegerField', [], {'default': '0'}),
+            'summary': ('django.db.models.fields.CharField', [], {'max_length': '200', 'blank': 'True'}),
+            'version': ('django.db.models.fields.CharField', [], {'max_length': '100', 'blank': 'True'})
+        },
+        u'orm.package_dependency': {
+            'Meta': {'object_name': 'Package_Dependency'},
+            'dep_type': ('django.db.models.fields.IntegerField', [], {}),
+            'depends_on': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'package_dependencies_target'", 'to': u"orm['orm.Package']"}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'package': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'package_dependencies_source'", 'to': u"orm['orm.Package']"}),
+            'target': ('django.db.models.fields.related.ForeignKey', [], {'to': u"orm['orm.Target']", 'null': 'True'})
+        },
+        u'orm.package_file': {
+            'Meta': {'object_name': 'Package_File'},
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'package': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'buildfilelist_package'", 'to': u"orm['orm.Package']"}),
+            'path': ('django.db.models.fields.FilePathField', [], {'max_length': '255', 'blank': 'True'}),
+            'size': ('django.db.models.fields.IntegerField', [], {})
+        },
+        u'orm.recipe': {
+            'Meta': {'object_name': 'Recipe'},
+            'bugtracker': ('django.db.models.fields.URLField', [], {'max_length': '200', 'blank': 'True'}),
+            'description': ('django.db.models.fields.CharField', [], {'max_length': '100', 'blank': 'True'}),
+            'file_path': ('django.db.models.fields.FilePathField', [], {'max_length': '255'}),
+            'homepage': ('django.db.models.fields.URLField', [], {'max_length': '200', 'blank': 'True'}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'layer_version': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'recipe_layer_version'", 'to': u"orm['orm.Layer_Version']"}),
+            'license': ('django.db.models.fields.CharField', [], {'max_length': '200', 'blank': 'True'}),
+            'name': ('django.db.models.fields.CharField', [], {'max_length': '100', 'blank': 'True'}),
+            'section': ('django.db.models.fields.CharField', [], {'max_length': '100', 'blank': 'True'}),
+            'summary': ('django.db.models.fields.CharField', [], {'max_length': '100', 'blank': 'True'}),
+            'version': ('django.db.models.fields.CharField', [], {'max_length': '100', 'blank': 'True'})
+        },
+        u'orm.recipe_dependency': {
+            'Meta': {'object_name': 'Recipe_Dependency'},
+            'dep_type': ('django.db.models.fields.IntegerField', [], {}),
+            'depends_on': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'r_dependencies_depends'", 'to': u"orm['orm.Recipe']"}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'recipe': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'r_dependencies_recipe'", 'to': u"orm['orm.Recipe']"})
+        },
+        u'orm.target': {
+            'Meta': {'object_name': 'Target'},
+            'build': ('django.db.models.fields.related.ForeignKey', [], {'to': u"orm['orm.Build']"}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'image_size': ('django.db.models.fields.IntegerField', [], {'default': '0'}),
+            'is_image': ('django.db.models.fields.BooleanField', [], {'default': 'False'}),
+            'license_manifest_path': ('django.db.models.fields.CharField', [], {'max_length': '500', 'null': 'True'}),
+            'target': ('django.db.models.fields.CharField', [], {'max_length': '100'})
+        },
+        u'orm.target_file': {
+            'Meta': {'object_name': 'Target_File'},
+            'directory': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'directory_set'", 'null': 'True', 'to': u"orm['orm.Target_File']"}),
+            'group': ('django.db.models.fields.CharField', [], {'max_length': '128'}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'inodetype': ('django.db.models.fields.IntegerField', [], {}),
+            'owner': ('django.db.models.fields.CharField', [], {'max_length': '128'}),
+            'path': ('django.db.models.fields.FilePathField', [], {'max_length': '100'}),
+            'permission': ('django.db.models.fields.CharField', [], {'max_length': '16'}),
+            'size': ('django.db.models.fields.IntegerField', [], {}),
+            'sym_target': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'symlink_set'", 'null': 'True', 'to': u"orm['orm.Target_File']"}),
+            'target': ('django.db.models.fields.related.ForeignKey', [], {'to': u"orm['orm.Target']"})
+        },
+        u'orm.target_image_file': {
+            'Meta': {'object_name': 'Target_Image_File'},
+            'file_name': ('django.db.models.fields.FilePathField', [], {'max_length': '100'}),
+            'file_size': ('django.db.models.fields.IntegerField', [], {}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'target': ('django.db.models.fields.related.ForeignKey', [], {'to': u"orm['orm.Target']"})
+        },
+        u'orm.target_installed_package': {
+            'Meta': {'object_name': 'Target_Installed_Package'},
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'package': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'buildtargetlist_package'", 'to': u"orm['orm.Package']"}),
+            'target': ('django.db.models.fields.related.ForeignKey', [], {'to': u"orm['orm.Target']"})
+        },
+        u'orm.task': {
+            'Meta': {'ordering': "('order', 'recipe')", 'unique_together': "(('build', 'recipe', 'task_name'),)", 'object_name': 'Task'},
+            'build': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'task_build'", 'to': u"orm['orm.Build']"}),
+            'cpu_usage': ('django.db.models.fields.DecimalField', [], {'null': 'True', 'max_digits': '6', 'decimal_places': '2'}),
+            'disk_io': ('django.db.models.fields.IntegerField', [], {'null': 'True'}),
+            'elapsed_time': ('django.db.models.fields.DecimalField', [], {'null': 'True', 'max_digits': '6', 'decimal_places': '2'}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'line_number': ('django.db.models.fields.IntegerField', [], {'default': '0'}),
+            'logfile': ('django.db.models.fields.FilePathField', [], {'max_length': '255', 'blank': 'True'}),
+            'message': ('django.db.models.fields.CharField', [], {'max_length': '240'}),
+            'order': ('django.db.models.fields.IntegerField', [], {'null': 'True'}),
+            'outcome': ('django.db.models.fields.IntegerField', [], {'default': '-1'}),
+            'path_to_sstate_obj': ('django.db.models.fields.FilePathField', [], {'max_length': '500', 'blank': 'True'}),
+            'recipe': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'build_recipe'", 'to': u"orm['orm.Recipe']"}),
+            'script_type': ('django.db.models.fields.IntegerField', [], {'default': '0'}),
+            'source_url': ('django.db.models.fields.FilePathField', [], {'max_length': '255', 'blank': 'True'}),
+            'sstate_checksum': ('django.db.models.fields.CharField', [], {'max_length': '100', 'blank': 'True'}),
+            'sstate_result': ('django.db.models.fields.IntegerField', [], {'default': '0'}),
+            'task_executed': ('django.db.models.fields.BooleanField', [], {'default': 'False'}),
+            'task_name': ('django.db.models.fields.CharField', [], {'max_length': '100'}),
+            'work_directory': ('django.db.models.fields.FilePathField', [], {'max_length': '255', 'blank': 'True'})
+        },
+        u'orm.task_dependency': {
+            'Meta': {'object_name': 'Task_Dependency'},
+            'depends_on': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'task_dependencies_depends'", 'to': u"orm['orm.Task']"}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'task': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'task_dependencies_task'", 'to': u"orm['orm.Task']"})
+        },
+        u'orm.variable': {
+            'Meta': {'object_name': 'Variable'},
+            'build': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'variable_build'", 'to': u"orm['orm.Build']"}),
+            'changed': ('django.db.models.fields.BooleanField', [], {'default': 'False'}),
+            'description': ('django.db.models.fields.TextField', [], {'blank': 'True'}),
+            'human_readable_name': ('django.db.models.fields.CharField', [], {'max_length': '200'}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'variable_name': ('django.db.models.fields.CharField', [], {'max_length': '100'}),
+            'variable_value': ('django.db.models.fields.TextField', [], {'blank': 'True'})
+        },
+        u'orm.variablehistory': {
+            'Meta': {'object_name': 'VariableHistory'},
+            'file_name': ('django.db.models.fields.FilePathField', [], {'max_length': '255'}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'line_number': ('django.db.models.fields.IntegerField', [], {'null': 'True'}),
+            'operation': ('django.db.models.fields.CharField', [], {'max_length': '16'}),
+            'value': ('django.db.models.fields.TextField', [], {'blank': 'True'}),
+            'variable': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'vhistory'", 'to': u"orm['orm.Variable']"})
+        }
+    }
+
+    complete_apps = ['orm']

bitbake/lib/toaster/orm/migrations/0007_auto__add_helptext.py

@@ -0,0 +1,214 @@
+# -*- coding: utf-8 -*-
+from south.utils import datetime_utils as datetime
+from south.db import db
+from south.v2 import SchemaMigration
+from django.db import models
+
+
+class Migration(SchemaMigration):
+
+    def forwards(self, orm):
+        # Adding model 'HelpText'
+        db.create_table(u'orm_helptext', (
+            (u'id', self.gf('django.db.models.fields.AutoField')(primary_key=True)),
+            ('build', self.gf('django.db.models.fields.related.ForeignKey')(related_name='helptext_build', to=orm['orm.Build'])),
+            ('area', self.gf('django.db.models.fields.IntegerField')()),
+            ('key', self.gf('django.db.models.fields.CharField')(max_length=100)),
+            ('text', self.gf('django.db.models.fields.TextField')()),
+        ))
+        db.send_create_signal(u'orm', ['HelpText'])
+
+
+    def backwards(self, orm):
+        # Deleting model 'HelpText'
+        db.delete_table(u'orm_helptext')
+
+
+    models = {
+        u'orm.build': {
+            'Meta': {'object_name': 'Build'},
+            'bitbake_version': ('django.db.models.fields.CharField', [], {'max_length': '50'}),
+            'build_name': ('django.db.models.fields.CharField', [], {'max_length': '100'}),
+            'completed_on': ('django.db.models.fields.DateTimeField', [], {}),
+            'cooker_log_path': ('django.db.models.fields.CharField', [], {'max_length': '500'}),
+            'distro': ('django.db.models.fields.CharField', [], {'max_length': '100'}),
+            'distro_version': ('django.db.models.fields.CharField', [], {'max_length': '100'}),
+            'errors_no': ('django.db.models.fields.IntegerField', [], {'default': '0'}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'machine': ('django.db.models.fields.CharField', [], {'max_length': '100'}),
+            'outcome': ('django.db.models.fields.IntegerField', [], {'default': '2'}),
+            'started_on': ('django.db.models.fields.DateTimeField', [], {}),
+            'timespent': ('django.db.models.fields.IntegerField', [], {'default': '0'}),
+            'warnings_no': ('django.db.models.fields.IntegerField', [], {'default': '0'})
+        },
+        u'orm.helptext': {
+            'Meta': {'object_name': 'HelpText'},
+            'area': ('django.db.models.fields.IntegerField', [], {}),
+            'build': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'helptext_build'", 'to': u"orm['orm.Build']"}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'key': ('django.db.models.fields.CharField', [], {'max_length': '100'}),
+            'text': ('django.db.models.fields.TextField', [], {})
+        },
+        u'orm.layer': {
+            'Meta': {'object_name': 'Layer'},
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'layer_index_url': ('django.db.models.fields.URLField', [], {'max_length': '200'}),
+            'local_path': ('django.db.models.fields.FilePathField', [], {'max_length': '255'}),
+            'name': ('django.db.models.fields.CharField', [], {'max_length': '100'})
+        },
+        u'orm.layer_version': {
+            'Meta': {'object_name': 'Layer_Version'},
+            'branch': ('django.db.models.fields.CharField', [], {'max_length': '50'}),
+            'build': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'layer_version_build'", 'to': u"orm['orm.Build']"}),
+            'commit': ('django.db.models.fields.CharField', [], {'max_length': '100'}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'layer': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'layer_version_layer'", 'to': u"orm['orm.Layer']"}),
+            'priority': ('django.db.models.fields.IntegerField', [], {})
+        },
+        u'orm.logmessage': {
+            'Meta': {'object_name': 'LogMessage'},
+            'build': ('django.db.models.fields.related.ForeignKey', [], {'to': u"orm['orm.Build']"}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'level': ('django.db.models.fields.IntegerField', [], {'default': '0'}),
+            'lineno': ('django.db.models.fields.IntegerField', [], {'null': 'True'}),
+            'message': ('django.db.models.fields.CharField', [], {'max_length': '240'}),
+            'pathname': ('django.db.models.fields.FilePathField', [], {'max_length': '255', 'blank': 'True'}),
+            'task': ('django.db.models.fields.related.ForeignKey', [], {'to': u"orm['orm.Task']", 'null': 'True', 'blank': 'True'})
+        },
+        u'orm.package': {
+            'Meta': {'object_name': 'Package'},
+            'build': ('django.db.models.fields.related.ForeignKey', [], {'to': u"orm['orm.Build']"}),
+            'description': ('django.db.models.fields.CharField', [], {'max_length': '200', 'blank': 'True'}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'installed_name': ('django.db.models.fields.CharField', [], {'default': "''", 'max_length': '100'}),
+            'installed_size': ('django.db.models.fields.IntegerField', [], {'default': '0'}),
+            'license': ('django.db.models.fields.CharField', [], {'max_length': '80', 'blank': 'True'}),
+            'name': ('django.db.models.fields.CharField', [], {'max_length': '100'}),
+            'recipe': ('django.db.models.fields.related.ForeignKey', [], {'to': u"orm['orm.Recipe']", 'null': 'True'}),
+            'revision': ('django.db.models.fields.CharField', [], {'max_length': '32', 'blank': 'True'}),
+            'section': ('django.db.models.fields.CharField', [], {'max_length': '80', 'blank': 'True'}),
+            'size': ('django.db.models.fields.IntegerField', [], {'default': '0'}),
+            'summary': ('django.db.models.fields.CharField', [], {'max_length': '200', 'blank': 'True'}),
+            'version': ('django.db.models.fields.CharField', [], {'max_length': '100', 'blank': 'True'})
+        },
+        u'orm.package_dependency': {
+            'Meta': {'object_name': 'Package_Dependency'},
+            'dep_type': ('django.db.models.fields.IntegerField', [], {}),
+            'depends_on': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'package_dependencies_target'", 'to': u"orm['orm.Package']"}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'package': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'package_dependencies_source'", 'to': u"orm['orm.Package']"}),
+            'target': ('django.db.models.fields.related.ForeignKey', [], {'to': u"orm['orm.Target']", 'null': 'True'})
+        },
+        u'orm.package_file': {
+            'Meta': {'object_name': 'Package_File'},
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'package': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'buildfilelist_package'", 'to': u"orm['orm.Package']"}),
+            'path': ('django.db.models.fields.FilePathField', [], {'max_length': '255', 'blank': 'True'}),
+            'size': ('django.db.models.fields.IntegerField', [], {})
+        },
+        u'orm.recipe': {
+            'Meta': {'object_name': 'Recipe'},
+            'bugtracker': ('django.db.models.fields.URLField', [], {'max_length': '200', 'blank': 'True'}),
+            'description': ('django.db.models.fields.CharField', [], {'max_length': '100', 'blank': 'True'}),
+            'file_path': ('django.db.models.fields.FilePathField', [], {'max_length': '255'}),
+            'homepage': ('django.db.models.fields.URLField', [], {'max_length': '200', 'blank': 'True'}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'layer_version': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'recipe_layer_version'", 'to': u"orm['orm.Layer_Version']"}),
+            'license': ('django.db.models.fields.CharField', [], {'max_length': '200', 'blank': 'True'}),
+            'name': ('django.db.models.fields.CharField', [], {'max_length': '100', 'blank': 'True'}),
+            'section': ('django.db.models.fields.CharField', [], {'max_length': '100', 'blank': 'True'}),
+            'summary': ('django.db.models.fields.CharField', [], {'max_length': '100', 'blank': 'True'}),
+            'version': ('django.db.models.fields.CharField', [], {'max_length': '100', 'blank': 'True'})
+        },
+        u'orm.recipe_dependency': {
+            'Meta': {'object_name': 'Recipe_Dependency'},
+            'dep_type': ('django.db.models.fields.IntegerField', [], {}),
+            'depends_on': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'r_dependencies_depends'", 'to': u"orm['orm.Recipe']"}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'recipe': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'r_dependencies_recipe'", 'to': u"orm['orm.Recipe']"})
+        },
+        u'orm.target': {
+            'Meta': {'object_name': 'Target'},
+            'build': ('django.db.models.fields.related.ForeignKey', [], {'to': u"orm['orm.Build']"}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'image_size': ('django.db.models.fields.IntegerField', [], {'default': '0'}),
+            'is_image': ('django.db.models.fields.BooleanField', [], {'default': 'False'}),
+            'license_manifest_path': ('django.db.models.fields.CharField', [], {'max_length': '500', 'null': 'True'}),
+            'target': ('django.db.models.fields.CharField', [], {'max_length': '100'})
+        },
+        u'orm.target_file': {
+            'Meta': {'object_name': 'Target_File'},
+            'directory': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'directory_set'", 'null': 'True', 'to': u"orm['orm.Target_File']"}),
+            'group': ('django.db.models.fields.CharField', [], {'max_length': '128'}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'inodetype': ('django.db.models.fields.IntegerField', [], {}),
+            'owner': ('django.db.models.fields.CharField', [], {'max_length': '128'}),
+            'path': ('django.db.models.fields.FilePathField', [], {'max_length': '100'}),
+            'permission': ('django.db.models.fields.CharField', [], {'max_length': '16'}),
+            'size': ('django.db.models.fields.IntegerField', [], {}),
+            'sym_target': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'symlink_set'", 'null': 'True', 'to': u"orm['orm.Target_File']"}),
+            'target': ('django.db.models.fields.related.ForeignKey', [], {'to': u"orm['orm.Target']"})
+        },
+        u'orm.target_image_file': {
+            'Meta': {'object_name': 'Target_Image_File'},
+            'file_name': ('django.db.models.fields.FilePathField', [], {'max_length': '100'}),
+            'file_size': ('django.db.models.fields.IntegerField', [], {}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'target': ('django.db.models.fields.related.ForeignKey', [], {'to': u"orm['orm.Target']"})
+        },
+        u'orm.target_installed_package': {
+            'Meta': {'object_name': 'Target_Installed_Package'},
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'package': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'buildtargetlist_package'", 'to': u"orm['orm.Package']"}),
+            'target': ('django.db.models.fields.related.ForeignKey', [], {'to': u"orm['orm.Target']"})
+        },
+        u'orm.task': {
+            'Meta': {'ordering': "('order', 'recipe')", 'unique_together': "(('build', 'recipe', 'task_name'),)", 'object_name': 'Task'},
+            'build': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'task_build'", 'to': u"orm['orm.Build']"}),
+            'cpu_usage': ('django.db.models.fields.DecimalField', [], {'null': 'True', 'max_digits': '6', 'decimal_places': '2'}),
+            'disk_io': ('django.db.models.fields.IntegerField', [], {'null': 'True'}),
+            'elapsed_time': ('django.db.models.fields.DecimalField', [], {'null': 'True', 'max_digits': '6', 'decimal_places': '2'}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'line_number': ('django.db.models.fields.IntegerField', [], {'default': '0'}),
+            'logfile': ('django.db.models.fields.FilePathField', [], {'max_length': '255', 'blank': 'True'}),
+            'message': ('django.db.models.fields.CharField', [], {'max_length': '240'}),
+            'order': ('django.db.models.fields.IntegerField', [], {'null': 'True'}),
+            'outcome': ('django.db.models.fields.IntegerField', [], {'default': '-1'}),
+            'path_to_sstate_obj': ('django.db.models.fields.FilePathField', [], {'max_length': '500', 'blank': 'True'}),
+            'recipe': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'build_recipe'", 'to': u"orm['orm.Recipe']"}),
+            'script_type': ('django.db.models.fields.IntegerField', [], {'default': '0'}),
+            'source_url': ('django.db.models.fields.FilePathField', [], {'max_length': '255', 'blank': 'True'}),
+            'sstate_checksum': ('django.db.models.fields.CharField', [], {'max_length': '100', 'blank': 'True'}),
+            'sstate_result': ('django.db.models.fields.IntegerField', [], {'default': '0'}),
+            'task_executed': ('django.db.models.fields.BooleanField', [], {'default': 'False'}),
+            'task_name': ('django.db.models.fields.CharField', [], {'max_length': '100'}),
+            'work_directory': ('django.db.models.fields.FilePathField', [], {'max_length': '255', 'blank': 'True'})
+        },
+        u'orm.task_dependency': {
+            'Meta': {'object_name': 'Task_Dependency'},
+            'depends_on': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'task_dependencies_depends'", 'to': u"orm['orm.Task']"}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'task': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'task_dependencies_task'", 'to': u"orm['orm.Task']"})
+        },
+        u'orm.variable': {
+            'Meta': {'object_name': 'Variable'},
+            'build': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'variable_build'", 'to': u"orm['orm.Build']"}),
+            'changed': ('django.db.models.fields.BooleanField', [], {'default': 'False'}),
+            'description': ('django.db.models.fields.TextField', [], {'blank': 'True'}),
+            'human_readable_name': ('django.db.models.fields.CharField', [], {'max_length': '200'}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'variable_name': ('django.db.models.fields.CharField', [], {'max_length': '100'}),
+            'variable_value': ('django.db.models.fields.TextField', [], {'blank': 'True'})
+        },
+        u'orm.variablehistory': {
+            'Meta': {'object_name': 'VariableHistory'},
+            'file_name': ('django.db.models.fields.FilePathField', [], {'max_length': '255'}),
+            u'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
+            'line_number': ('django.db.models.fields.IntegerField', [], {'null': 'True'}),
+            'operation': ('django.db.models.fields.CharField', [], {'max_length': '16'}),
+            'value': ('django.db.models.fields.TextField', [], {'blank': 'True'}),
+            'variable': ('django.db.models.fields.related.ForeignKey', [], {'related_name': "'vhistory'", 'to': u"orm['orm.Variable']"})
+        }
+    }
+
+    complete_apps = ['orm']

bitbake/lib/toaster/orm/models.py

@@ -20,6 +20,7 @@
 # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 
 from django.db import models
+from django.db.models import F
 from django.utils.encoding import python_2_unicode_compatible
 
 
@@ -34,11 +35,9 @@ class Build(models.Model):
         (IN_PROGRESS, 'In Progress'),
     )
 
-    search_allowed_fields = ['machine', 'image_fstypes',
-                             'cooker_log_path', "target__target"]
+    search_allowed_fields = ['machine', 'cooker_log_path', "target__target", "target__target_image_file__file_name"]
 
     machine = models.CharField(max_length=100)
-    image_fstypes = models.CharField(max_length=100)
     distro = models.CharField(max_length=100)
     distro_version = models.CharField(max_length=100)
     started_on = models.DateTimeField()
@@ -51,18 +50,57 @@ class Build(models.Model):
     build_name = models.CharField(max_length=100)
     bitbake_version = models.CharField(max_length=50)
 
+    def get_sorted_target_list(self):
+        tgts = Target.objects.filter(build_id = self.id).order_by( 'target' );
+        return( tgts );
+
+
 @python_2_unicode_compatible
 class Target(models.Model):
-    search_allowed_fields = ['target', 'image_fstypes', 'file_name']
+    search_allowed_fields = ['target', 'file_name']
     build = models.ForeignKey(Build)
     target = models.CharField(max_length=100)
     is_image = models.BooleanField(default = False)
-    file_name = models.CharField(max_length=100)
-    file_size = models.IntegerField()
+    image_size = models.IntegerField(default=0)
+    license_manifest_path = models.CharField(max_length=500, null=True)
+
+    def package_count(self):
+        return Target_Installed_Package.objects.filter(target_id__exact=self.id).count()
 
     def __str__(self):
         return self.target
 
+class Target_Image_File(models.Model):
+    target = models.ForeignKey(Target)
+    file_name = models.FilePathField(max_length=100)
+    file_size = models.IntegerField()
+
+class Target_File(models.Model):
+    ITYPE_REGULAR = 1
+    ITYPE_DIRECTORY = 2
+    ITYPE_SYMLINK = 3
+    ITYPE_SOCKET = 4
+    ITYPE_FIFO = 5
+    ITYPE_CHARACTER = 6
+    ITYPE_BLOCK = 7
+    ITYPES = ( (ITYPE_REGULAR ,'regular'),
+        ( ITYPE_DIRECTORY ,'directory'),
+        ( ITYPE_SYMLINK ,'symlink'),
+        ( ITYPE_SOCKET ,'socket'),
+        ( ITYPE_FIFO ,'fifo'),
+        ( ITYPE_CHARACTER ,'character'),
+        ( ITYPE_BLOCK ,'block'),
+        )
+
+    target = models.ForeignKey(Target)
+    path = models.FilePathField()
+    size = models.IntegerField()
+    inodetype = models.IntegerField(choices = ITYPES)
+    permission = models.CharField(max_length=16)
+    owner = models.CharField(max_length=128)
+    group = models.CharField(max_length=128)
+    directory = models.ForeignKey('Target_File', related_name="directory_set", null=True)
+    sym_target = models.ForeignKey('Target_File', related_name="symlink_set", null=True)
 
 
 class TaskManager(models.Manager):
@@ -78,9 +116,9 @@ class Task(models.Model):
 
     SSTATE_RESULT = (
         (SSTATE_NA, 'Not Applicable'), # For rest of tasks, but they still need checking.
-        (SSTATE_MISS, 'Missing'), # it is a miss
+        (SSTATE_MISS, 'File not in cache'), # the sstate object was not found
         (SSTATE_FAILED, 'Failed'), # there was a pkg, but the script failed
-        (SSTATE_RESTORED, 'Restored'), # succesfully restored
+        (SSTATE_RESTORED, 'Succeeded'), # successfully restored
     )
 
     CODING_NA = 0
@@ -93,29 +131,65 @@ class Task(models.Model):
         (CODING_SHELL, 'Shell'),
     )
 
+    OUTCOME_NA = -1
     OUTCOME_SUCCESS = 0
     OUTCOME_COVERED = 1
     OUTCOME_CACHED = 2
     OUTCOME_PREBUILT = 3
     OUTCOME_FAILED = 4
-    OUTCOME_NA = 5
+    OUTCOME_EMPTY = 5
 
     TASK_OUTCOME = (
+        (OUTCOME_NA, 'Not Available'),
         (OUTCOME_SUCCESS, 'Succeeded'),
         (OUTCOME_COVERED, 'Covered'),
         (OUTCOME_CACHED, 'Cached'),
         (OUTCOME_PREBUILT, 'Prebuilt'),
         (OUTCOME_FAILED, 'Failed'),
-        (OUTCOME_NA, 'Not Available'),
+        (OUTCOME_EMPTY, 'Empty'),
     )
 
-    search_allowed_fields = [ "recipe__name", "task_name" ]
+    TASK_OUTCOME_HELP = (
+        (OUTCOME_SUCCESS, 'This task successfully completed'),
+        (OUTCOME_COVERED, 'This task did not run because its output is provided by another task'),
+        (OUTCOME_CACHED, 'This task restored output from the sstate-cache directory or mirrors'),
+        (OUTCOME_PREBUILT, 'This task did not run because its outcome was reused from a previous build'),
+        (OUTCOME_FAILED, 'This task did not complete'),
+        (OUTCOME_EMPTY, 'This task has no executable content'),
+        (OUTCOME_NA, ''),
+    )
+
+    search_allowed_fields = [ "recipe__name", "recipe__version", "task_name", "logfile" ]
 
     objects = TaskManager()
 
     def get_related_setscene(self):
         return Task.objects.related_setscene(self)
 
+    def get_outcome_text(self):
+        return Task.TASK_OUTCOME[self.outcome + 1][1]
+
+    def get_outcome_help(self):
+        return Task.TASK_OUTCOME_HELP[self.outcome][1]
+
+    def get_sstate_text(self):
+        if self.sstate_result==Task.SSTATE_NA:
+            return ''
+        else:
+            return Task.SSTATE_RESULT[self.sstate_result][1]
+
+    def get_executed_display(self):
+        if self.task_executed:
+            return "Executed"
+        return "Not Executed"
+
+    def get_description(self):
+        helptext = HelpText.objects.filter(key=self.task_name, area=HelpText.VARIABLE, build=self.build)
+        try:
+            return helptext[0].text
+        except IndexError:
+            return ''
+
     build = models.ForeignKey(Build, related_name='task_build')
     order = models.IntegerField(null=True)
     task_executed = models.BooleanField(default=False) # True means Executed, False means Not/Executed
@@ -130,13 +204,17 @@ class Task(models.Model):
     line_number = models.IntegerField(default=0)
     disk_io = models.IntegerField(null=True)
     cpu_usage = models.DecimalField(max_digits=6, decimal_places=2, null=True)
-    elapsed_time = models.CharField(max_length=50, default=0)
+    elapsed_time = models.DecimalField(max_digits=6, decimal_places=2, null=True)
     sstate_result = models.IntegerField(choices=SSTATE_RESULT, default=SSTATE_NA)
     message = models.CharField(max_length=240)
     logfile = models.FilePathField(max_length=255, blank=True)
 
+    outcome_text = property(get_outcome_text)
+    sstate_text  = property(get_sstate_text)
+
     class Meta:
         ordering = ('order', 'recipe' ,)
+        unique_together = ('build', 'recipe', 'task_name', )
 
 
 class Task_Dependency(models.Model):
@@ -144,7 +222,7 @@ class Task_Dependency(models.Model):
     depends_on = models.ForeignKey(Task, related_name='task_dependencies_depends')
 
 class Package(models.Model):
-    search_allowed_fields = ['name', 'version', 'revision', 'recipe__name', 'recipe__version', 'recipe__license', 'recipe__layer_version__layer__name', 'recipe__layer_version__branch', 'recipe__layer_version__commit', 'recipe__layer_version__layer__local_path']
+    search_allowed_fields = ['name', 'version', 'revision', 'recipe__name', 'recipe__version', 'recipe__license', 'recipe__layer_version__layer__name', 'recipe__layer_version__branch', 'recipe__layer_version__commit', 'recipe__layer_version__layer__local_path', 'installed_name']
     build = models.ForeignKey('Build')
     recipe = models.ForeignKey('Recipe', null=True)
     name = models.CharField(max_length=100)
@@ -158,6 +236,12 @@ class Package(models.Model):
     section = models.CharField(max_length=80, blank=True)
     license = models.CharField(max_length=80, blank=True)
 
+class Package_DependencyManager(models.Manager):
+    use_for_related_fields = True
+
+    def get_query_set(self):
+        return super(Package_DependencyManager, self).get_query_set().exclude(package_id = F('depends_on__id'))
+
 class Package_Dependency(models.Model):
     TYPE_RDEPENDS = 0
     TYPE_TRDEPENDS = 1
@@ -197,6 +281,7 @@ class Package_Dependency(models.Model):
     depends_on = models.ForeignKey(Package, related_name='package_dependencies_target')   # soft dependency
     dep_type = models.IntegerField(choices=DEPENDS_TYPE)
     target = models.ForeignKey(Target, null=True)
+    objects = Package_DependencyManager()
 
 class Target_Installed_Package(models.Model):
     target = models.ForeignKey(Target)
@@ -208,7 +293,7 @@ class Package_File(models.Model):
     size = models.IntegerField()
 
 class Recipe(models.Model):
-    search_allowed_fields = ['name', 'version', 'file_path', 'license', 'layer_version__layer__name', 'layer_version__branch', 'layer_version__commit', 'layer_version__layer__local_path']
+    search_allowed_fields = ['name', 'version', 'file_path', 'section', 'license', 'layer_version__layer__name', 'layer_version__branch', 'layer_version__commit', 'layer_version__layer__local_path']
     name = models.CharField(max_length=100, blank=True)
     version = models.CharField(max_length=100, blank=True)
     layer_version = models.ForeignKey('Layer_Version', related_name='recipe_layer_version')
@@ -216,11 +301,15 @@ class Recipe(models.Model):
     description = models.CharField(max_length=100, blank=True)
     section = models.CharField(max_length=100, blank=True)
     license = models.CharField(max_length=200, blank=True)
-    licensing_info = models.TextField(blank=True)
     homepage = models.URLField(blank=True)
     bugtracker = models.URLField(blank=True)
     file_path = models.FilePathField(max_length=255)
 
+class Recipe_DependencyManager(models.Manager):
+    use_for_related_fields = True
+
+    def get_query_set(self):
+        return super(Recipe_DependencyManager, self).get_query_set().exclude(recipe_id = F('depends_on__id'))
 
 class Recipe_Dependency(models.Model):
     TYPE_DEPENDS = 0
@@ -233,6 +322,7 @@ class Recipe_Dependency(models.Model):
     recipe = models.ForeignKey(Recipe, related_name='r_dependencies_recipe')
     depends_on = models.ForeignKey(Recipe, related_name='r_dependencies_depends')
     dep_type = models.IntegerField(choices=DEPENDS_TYPE)
+    objects = Recipe_DependencyManager()
 
 class Layer(models.Model):
     name = models.CharField(max_length=100)
@@ -260,10 +350,20 @@ class Variable(models.Model):
 
 class VariableHistory(models.Model):
     variable = models.ForeignKey(Variable, related_name='vhistory')
+    value   = models.TextField(blank=True)
     file_name = models.FilePathField(max_length=255)
     line_number = models.IntegerField(null=True)
     operation = models.CharField(max_length=16)
 
+class HelpText(models.Model):
+    VARIABLE = 0
+    HELPTEXT_AREA = ((VARIABLE, 'variable'), )
+
+    build = models.ForeignKey(Build, related_name='helptext_build')
+    area = models.IntegerField(choices=HELPTEXT_AREA)
+    key = models.CharField(max_length=100)
+    text = models.TextField()
+
 class LogMessage(models.Model):
     INFO = 0
     WARNING = 1
@@ -274,6 +374,7 @@ class LogMessage(models.Model):
             (ERROR, "error") )
 
     build = models.ForeignKey(Build)
+    task  = models.ForeignKey(Task, blank = True, null=True)
     level = models.IntegerField(choices=LOG_LEVEL, default=INFO)
     message=models.CharField(max_length=240)
     pathname = models.FilePathField(max_length=255, blank=True)

bitbake/lib/toaster/toastergui/static/css/default.css

@@ -30,7 +30,7 @@ dd code, .alert code { white-space: pre-wrap; word-break: break-all; word-wrap:
 .tooltip code { background-color: transparent; color: #FFFFFF; font-weight: normal; border: none; font-size: 1em; }
 
 /* Style for definition lists */
-dd ul { list-style-type: none; margin-left: 0px; }
+dd ul { list-style-type: none; margin: 0px; }
 dt, dd  {line-height: 25px; }
 dd li { line-height: 25px; }
 dd p { line-height: 20px; }
@@ -46,8 +46,7 @@ dd p { line-height: 20px; }
 .details { margin-top: 30px; }
 
 /* Required classes for the highlight behaviour in tables */
-.highlight { background-color: #D9EDF7; }
-.flash:target { -webkit-animation: target-fade 7s 1; -moz-animation: target-fade 7s 1; animation: target-fade 7s 1; }
+.highlight { -webkit-animation: target-fade 10s 1; -moz-animation: target-fade 10s 1; animation: target-fade 10s 1; }
 @-webkit-keyframes target-fade { 0% { background-color: #D9EDF7; } 25% { background-color: #D9EDF7; } 100% { background-color: white; } }
 @-moz-keyframes target-fade { 0% { background-color: #D9EDF7; } 25% { background-color: #D9EDF7; } 100% { background-color: white; } }
 @keyframes target-fade { 0% { background-color: #D9EDF7; } 25% { background-color: #D9EDF7; } 100% { background-color: white; } }
@@ -63,6 +62,9 @@ td a:hover { color: #000000; text-decoration: underline; }
 .table tbody tr.error > td { background-color: #FFFFFF; } /* override default Bootstrap behaviour */
 .table-hover tbody tr.error:hover > td { background-color: #F5F5F5;} /* override default Bootstrap behaviour */
 
+/* Right justify Bootstrap table columns for size fields */
+.table .sizecol { text-align: right; }
+
 /* Set error, warning, success and muted styles */
 .error, .red, td.error a, tr.error a { color: #b94a48; }
 a.error:hover, a.error:focus, tr.error a:hover { color: #943A38; text-decoration: underline; }
@@ -98,14 +100,21 @@ th > a, th > span { font-weight: normal; }
 .dropdown-menu { padding: 10px; }
 select { width: auto; }
 .page-header { color: #5A5A5A; }
+.top-air { margin-top: 40px;}
 .progress { margin-bottom: 0px; }
 .lead .badge { font-size: 18px; font-weight: normal; border-radius: 15px; padding: 9px; }
 .well > .lead, .alert .lead { margin-bottom: 0px; }
-.no-results { margin: 10px 0 0; }
+.no-results { margin: 10px 0; }
 .task-name { margin-left: 7px; }
-
-
-
+.icon-hand-right {color: #CCCCCC; }
+.help-inline { margin: 5px; }
+.hero-unit { margin: 20px 0 30px; }
+.hero-unit > .close { font-size:40px; }
+.hero-actions { margin-top: 30px; }
+.dashboard-section { background-color: transparent; }
+
+/* make tables Chrome-happy (me, not so much) */
+#otable { table-layout: fixed; word-wrap: break-word; }
 
 
 

bitbake/lib/toaster/toastergui/static/css/jquery.treetable.css

@@ -0,0 +1,28 @@
+table.treetable span.indenter {
+  display: inline-block;
+  margin: 0;
+  padding: 0;
+  text-align: right;
+
+  /* Disable text selection of nodes (for better D&D UX) */
+  user-select: none;
+  -khtml-user-select: none;
+  -moz-user-select: none;
+  -o-user-select: none;
+  -webkit-user-select: none;
+
+  /* Force content-box box model for indenter (Bootstrap compatibility) */
+  -webkit-box-sizing: content-box;
+  -moz-box-sizing: content-box;
+  box-sizing: content-box;
+
+  width: 19px;
+}
+
+table.treetable span.indenter a {
+  background-position: left center;
+  background-repeat: no-repeat;
+  display: inline-block;
+  text-decoration: none;
+  width: 19px;
+}

bitbake/lib/toaster/toastergui/static/css/jquery.treetable.theme.default.css

@@ -0,0 +1,64 @@
+table.treetable {
+  border: 1px solid #888;
+  border-collapse: collapse;
+  font-size: .8em;
+  line-height: 1;
+  margin: .6em 0 1.8em 0;
+  width: 100%;
+}
+
+table.treetable caption {
+  font-size: .9em;
+  font-weight: bold;
+  margin-bottom: .2em;
+}
+
+table.treetable tbody tr td {
+  cursor: default;
+  padding: .3em 1em;
+}
+
+table.treetable span {
+  background-position: center left;
+  background-repeat: no-repeat;
+  padding: .2em 0 .2em 1.5em;
+}
+
+table.treetable span.file {
+  background-image: url(data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAABAAAAAQCAQAAAC1+jfqAAAABGdBTUEAAK/INwWK6QAAABl0RVh0U29mdHdhcmUAQWRvYmUgSW1hZ2VSZWFkeXHJZTwAAADoSURBVBgZBcExblNBGAbA2ceegTRBuIKOgiihSZNTcC5LUHAihNJR0kGKCDcYJY6D3/77MdOinTvzAgCw8ysThIvn/VojIyMjIyPP+bS1sUQIV2s95pBDDvmbP/mdkft83tpYguZq5Jh/OeaYh+yzy8hTHvNlaxNNczm+la9OTlar1UdA/+C2A4trRCnD3jS8BB1obq2Gk6GU6QbQAS4BUaYSQAf4bhhKKTFdAzrAOwAxEUAH+KEM01SY3gM6wBsEAQB0gJ+maZoC3gI6iPYaAIBJsiRmHU0AALOeFC3aK2cWAACUXe7+AwO0lc9eTHYTAAAAAElFTkSuQmCC);
+}
+
+table.treetable span.folder {
+  background-image: url(data:image/png;base64,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);
+}
+
+table.treetable tr.collapsed span.indenter a {
+  background-image: url(data:image/png;base64,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);
+}
+
+table.treetable tr.expanded span.indenter a {
+  background-image: url(data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAABAAAAAQCAYAAAAf8/9hAAAACXBIWXMAAAsTAAALEwEAmpwYAAAKT2lDQ1BQaG90b3Nob3AgSUNDIHByb2ZpbGUAAHjanVNnVFPpFj333vRCS4iAlEtvUhUIIFJCi4AUkSYqIQkQSoghodkVUcERRUUEG8igiAOOjoCMFVEsDIoK2AfkIaKOg6OIisr74Xuja9a89+bN/rXXPues852zzwfACAyWSDNRNYAMqUIeEeCDx8TG4eQuQIEKJHAAEAizZCFz/SMBAPh+PDwrIsAHvgABeNMLCADATZvAMByH/w/qQplcAYCEAcB0kThLCIAUAEB6jkKmAEBGAYCdmCZTAKAEAGDLY2LjAFAtAGAnf+bTAICd+Jl7AQBblCEVAaCRACATZYhEAGg7AKzPVopFAFgwABRmS8Q5ANgtADBJV2ZIALC3AMDOEAuyAAgMADBRiIUpAAR7AGDIIyN4AISZABRG8lc88SuuEOcqAAB4mbI8uSQ5RYFbCC1xB1dXLh4ozkkXKxQ2YQJhmkAuwnmZGTKBNA/g88wAAKCRFRHgg/P9eM4Ors7ONo62Dl8t6r8G/yJiYuP+5c+rcEAAAOF0ftH+LC+zGoA7BoBt/qIl7gRoXgugdfeLZrIPQLUAoOnaV/Nw+H48PEWhkLnZ2eXk5NhKxEJbYcpXff5nwl/AV/1s+X48/Pf14L7iJIEyXYFHBPjgwsz0TKUcz5IJhGLc5o9H/LcL//wd0yLESWK5WCoU41EScY5EmozzMqUiiUKSKcUl0v9k4t8s+wM+3zUAsGo+AXuRLahdYwP2SycQWHTA4vcAAPK7b8HUKAgDgGiD4c93/+8//UegJQCAZkmScQAAXkQkLlTKsz/HCAAARKCBKrBBG/TBGCzABhzBBdzBC/xgNoRCJMTCQhBCCmSAHHJgKayCQiiGzbAdKmAv1EAdNMBRaIaTcA4uwlW4Dj1wD/phCJ7BKLyBCQRByAgTYSHaiAFiilgjjggXmYX4IcFIBBKLJCDJiBRRIkuRNUgxUopUIFVIHfI9cgI5h1xGupE7yAAygvyGvEcxlIGyUT3UDLVDuag3GoRGogvQZHQxmo8WoJvQcrQaPYw2oefQq2gP2o8+Q8cwwOgYBzPEbDAuxsNCsTgsCZNjy7EirAyrxhqwVqwDu4n1Y8+xdwQSgUXACTYEd0IgYR5BSFhMWE7YSKggHCQ0EdoJNwkDhFHCJyKTqEu0JroR+cQYYjIxh1hILCPWEo8TLxB7iEPENyQSiUMyJ7mQAkmxpFTSEtJG0m5SI+ksqZs0SBojk8naZGuyBzmULCAryIXkneTD5DPkG+Qh8lsKnWJAcaT4U+IoUspqShnlEOU05QZlmDJBVaOaUt2ooVQRNY9aQq2htlKvUYeoEzR1mjnNgxZJS6WtopXTGmgXaPdpr+h0uhHdlR5Ol9BX0svpR+iX6AP0dwwNhhWDx4hnKBmbGAcYZxl3GK+YTKYZ04sZx1QwNzHrmOeZD5lvVVgqtip8FZHKCpVKlSaVGyovVKmqpqreqgtV81XLVI+pXlN9rkZVM1PjqQnUlqtVqp1Q61MbU2epO6iHqmeob1Q/pH5Z/YkGWcNMw09DpFGgsV/jvMYgC2MZs3gsIWsNq4Z1gTXEJrHN2Xx2KruY/R27iz2qqaE5QzNKM1ezUvOUZj8H45hx+Jx0TgnnKKeX836K3hTvKeIpG6Y0TLkxZVxrqpaXllirSKtRq0frvTau7aedpr1Fu1n7gQ5Bx0onXCdHZ4/OBZ3nU9lT3acKpxZNPTr1ri6qa6UbobtEd79up+6Ynr5egJ5Mb6feeb3n+hx9L/1U/W36p/VHDFgGswwkBtsMzhg8xTVxbzwdL8fb8VFDXcNAQ6VhlWGX4YSRudE8o9VGjUYPjGnGXOMk423GbcajJgYmISZLTepN7ppSTbmmKaY7TDtMx83MzaLN1pk1mz0x1zLnm+eb15vft2BaeFostqi2uGVJsuRaplnutrxuhVo5WaVYVVpds0atna0l1rutu6cRp7lOk06rntZnw7Dxtsm2qbcZsOXYBtuutm22fWFnYhdnt8Wuw+6TvZN9un2N/T0HDYfZDqsdWh1+c7RyFDpWOt6azpzuP33F9JbpL2dYzxDP2DPjthPLKcRpnVOb00dnF2e5c4PziIuJS4LLLpc+Lpsbxt3IveRKdPVxXeF60vWdm7Obwu2o26/uNu5p7ofcn8w0nymeWTNz0MPIQ+BR5dE/C5+VMGvfrH5PQ0+BZ7XnIy9jL5FXrdewt6V3qvdh7xc+9j5yn+M+4zw33jLeWV/MN8C3yLfLT8Nvnl+F30N/I/9k/3r/0QCngCUBZwOJgUGBWwL7+Hp8Ib+OPzrbZfay2e1BjKC5QRVBj4KtguXBrSFoyOyQrSH355jOkc5pDoVQfujW0Adh5mGLw34MJ4WHhVeGP45wiFga0TGXNXfR3ENz30T6RJZE3ptnMU85ry1KNSo+qi5qPNo3ujS6P8YuZlnM1VidWElsSxw5LiquNm5svt/87fOH4p3iC+N7F5gvyF1weaHOwvSFpxapLhIsOpZATIhOOJTwQRAqqBaMJfITdyWOCnnCHcJnIi/RNtGI2ENcKh5O8kgqTXqS7JG8NXkkxTOlLOW5hCepkLxMDUzdmzqeFpp2IG0yPTq9MYOSkZBxQqohTZO2Z+pn5mZ2y6xlhbL+xW6Lty8elQfJa7OQrAVZLQq2QqboVFoo1yoHsmdlV2a/zYnKOZarnivN7cyzytuQN5zvn//tEsIS4ZK2pYZLVy0dWOa9rGo5sjxxedsK4xUFK4ZWBqw8uIq2Km3VT6vtV5eufr0mek1rgV7ByoLBtQFr6wtVCuWFfevc1+1dT1gvWd+1YfqGnRs+FYmKrhTbF5cVf9go3HjlG4dvyr+Z3JS0qavEuWTPZtJm6ebeLZ5bDpaql+aXDm4N2dq0Dd9WtO319kXbL5fNKNu7g7ZDuaO/PLi8ZafJzs07P1SkVPRU+lQ27tLdtWHX+G7R7ht7vPY07NXbW7z3/T7JvttVAVVN1WbVZftJ+7P3P66Jqun4lvttXa1ObXHtxwPSA/0HIw6217nU1R3SPVRSj9Yr60cOxx++/p3vdy0NNg1VjZzG4iNwRHnk6fcJ3/ceDTradox7rOEH0x92HWcdL2pCmvKaRptTmvtbYlu6T8w+0dbq3nr8R9sfD5w0PFl5SvNUyWna6YLTk2fyz4ydlZ19fi753GDborZ752PO32oPb++6EHTh0kX/i+c7vDvOXPK4dPKy2+UTV7hXmq86X23qdOo8/pPTT8e7nLuarrlca7nuer21e2b36RueN87d9L158Rb/1tWeOT3dvfN6b/fF9/XfFt1+cif9zsu72Xcn7q28T7xf9EDtQdlD3YfVP1v+3Njv3H9qwHeg89HcR/cGhYPP/pH1jw9DBY+Zj8uGDYbrnjg+OTniP3L96fynQ89kzyaeF/6i/suuFxYvfvjV69fO0ZjRoZfyl5O/bXyl/erA6xmv28bCxh6+yXgzMV70VvvtwXfcdx3vo98PT+R8IH8o/2j5sfVT0Kf7kxmTk/8EA5jz/GMzLdsAAAAgY0hSTQAAeiUAAICDAAD5/wAAgOkAAHUwAADqYAAAOpgAABdvkl/FRgAAAHFJREFUeNpi/P//PwMlgImBQsA44C6gvhfa29v3MzAwOODRc6CystIRbxi0t7fjDJjKykpGYrwwi1hxnLHQ3t7+jIGBQRJJ6HllZaUUKYEYRYBPOB0gBShKwKGA////48VtbW3/8clTnBIH3gCKkzJgAGvBX0dDm0sCAAAAAElFTkSuQmCC);
+}
+
+
+
+table.treetable tr.collapsed.selected span.indenter a {
+  background-image: url(data:image/png;base64,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);
+}
+
+table.treetable tr.expanded.selected span.indenter a {
+  background-image: url(data:image/png;base64,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);
+}
+
+table.treetable tr.accept {
+  background-color: #a3bce4;
+  color: #fff
+}
+
+table.treetable tr.collapsed.accept td span.indenter a {
+  background-image: url(data:image/x-png;base64,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);
+}
+
+table.treetable tr.expanded.accept td span.indenter a {
+  background-image: url(data:image/x-png;base64,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);
+}

bitbake/lib/toaster/toastergui/static/css/jquery.treetable.theme.toaster.css

@@ -0,0 +1,38 @@
+table.treetable span.file {
+  background-image: url(data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAABAAAAAQCAQAAAC1+jfqAAAABGdBTUEAAK/INwWK6QAAABl0RVh0U29mdHdhcmUAQWRvYmUgSW1hZ2VSZWFkeXHJZTwAAADoSURBVBgZBcExblNBGAbA2ceegTRBuIKOgiihSZNTcC5LUHAihNJR0kGKCDcYJY6D3/77MdOinTvzAgCw8ysThIvn/VojIyMjIyPP+bS1sUQIV2s95pBDDvmbP/mdkft83tpYguZq5Jh/OeaYh+yzy8hTHvNlaxNNczm+la9OTlar1UdA/+C2A4trRCnD3jS8BB1obq2Gk6GU6QbQAS4BUaYSQAf4bhhKKTFdAzrAOwAxEUAH+KEM01SY3gM6wBsEAQB0gJ+maZoC3gI6iPYaAIBJsiRmHU0AALOeFC3aK2cWAACUXe7+AwO0lc9eTHYTAAAAAElFTkSuQmCC);
+}
+
+table.treetable span.folder {
+  background-image: url(data:image/png;base64,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);
+}
+
+table.treetable tr.collapsed span.indenter a {
+  background-image: url(data:image/png;base64,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);
+}
+
+table.treetable tr.expanded span.indenter a {
+  background-image: url(data:image/png;base64,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);
+}
+
+
+
+table.treetable tr.collapsed.selected span.indenter a {
+  background-image: url(data:image/png;base64,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);
+}
+
+table.treetable tr.expanded.selected span.indenter a {
+  background-image: url(data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAABAAAAAQCAYAAAAf8/9hAAAACXBIWXMAAAsTAAALEwEAmpwYAAAKT2lDQ1BQaG90b3Nob3AgSUNDIHByb2ZpbGUAAHjanVNnVFPpFj333vRCS4iAlEtvUhUIIFJCi4AUkSYqIQkQSoghodkVUcERRUUEG8igiAOOjoCMFVEsDIoK2AfkIaKOg6OIisr74Xuja9a89+bN/rXXPues852zzwfACAyWSDNRNYAMqUIeEeCDx8TG4eQuQIEKJHAAEAizZCFz/SMBAPh+PDwrIsAHvgABeNMLCADATZvAMByH/w/qQplcAYCEAcB0kThLCIAUAEB6jkKmAEBGAYCdmCZTAKAEAGDLY2LjAFAtAGAnf+bTAICd+Jl7AQBblCEVAaCRACATZYhEAGg7AKzPVopFAFgwABRmS8Q5ANgtADBJV2ZIALC3AMDOEAuyAAgMADBRiIUpAAR7AGDIIyN4AISZABRG8lc88SuuEOcqAAB4mbI8uSQ5RYFbCC1xB1dXLh4ozkkXKxQ2YQJhmkAuwnmZGTKBNA/g88wAAKCRFRHgg/P9eM4Ors7ONo62Dl8t6r8G/yJiYuP+5c+rcEAAAOF0ftH+LC+zGoA7BoBt/qIl7gRoXgugdfeLZrIPQLUAoOnaV/Nw+H48PEWhkLnZ2eXk5NhKxEJbYcpXff5nwl/AV/1s+X48/Pf14L7iJIEyXYFHBPjgwsz0TKUcz5IJhGLc5o9H/LcL//wd0yLESWK5WCoU41EScY5EmozzMqUiiUKSKcUl0v9k4t8s+wM+3zUAsGo+AXuRLahdYwP2SycQWHTA4vcAAPK7b8HUKAgDgGiD4c93/+8//UegJQCAZkmScQAAXkQkLlTKsz/HCAAARKCBKrBBG/TBGCzABhzBBdzBC/xgNoRCJMTCQhBCCmSAHHJgKayCQiiGzbAdKmAv1EAdNMBRaIaTcA4uwlW4Dj1wD/phCJ7BKLyBCQRByAgTYSHaiAFiilgjjggXmYX4IcFIBBKLJCDJiBRRIkuRNUgxUopUIFVIHfI9cgI5h1xGupE7yAAygvyGvEcxlIGyUT3UDLVDuag3GoRGogvQZHQxmo8WoJvQcrQaPYw2oefQq2gP2o8+Q8cwwOgYBzPEbDAuxsNCsTgsCZNjy7EirAyrxhqwVqwDu4n1Y8+xdwQSgUXACTYEd0IgYR5BSFhMWE7YSKggHCQ0EdoJNwkDhFHCJyKTqEu0JroR+cQYYjIxh1hILCPWEo8TLxB7iEPENyQSiUMyJ7mQAkmxpFTSEtJG0m5SI+ksqZs0SBojk8naZGuyBzmULCAryIXkneTD5DPkG+Qh8lsKnWJAcaT4U+IoUspqShnlEOU05QZlmDJBVaOaUt2ooVQRNY9aQq2htlKvUYeoEzR1mjnNgxZJS6WtopXTGmgXaPdpr+h0uhHdlR5Ol9BX0svpR+iX6AP0dwwNhhWDx4hnKBmbGAcYZxl3GK+YTKYZ04sZx1QwNzHrmOeZD5lvVVgqtip8FZHKCpVKlSaVGyovVKmqpqreqgtV81XLVI+pXlN9rkZVM1PjqQnUlqtVqp1Q61MbU2epO6iHqmeob1Q/pH5Z/YkGWcNMw09DpFGgsV/jvMYgC2MZs3gsIWsNq4Z1gTXEJrHN2Xx2KruY/R27iz2qqaE5QzNKM1ezUvOUZj8H45hx+Jx0TgnnKKeX836K3hTvKeIpG6Y0TLkxZVxrqpaXllirSKtRq0frvTau7aedpr1Fu1n7gQ5Bx0onXCdHZ4/OBZ3nU9lT3acKpxZNPTr1ri6qa6UbobtEd79up+6Ynr5egJ5Mb6feeb3n+hx9L/1U/W36p/VHDFgGswwkBtsMzhg8xTVxbzwdL8fb8VFDXcNAQ6VhlWGX4YSRudE8o9VGjUYPjGnGXOMk423GbcajJgYmISZLTepN7ppSTbmmKaY7TDtMx83MzaLN1pk1mz0x1zLnm+eb15vft2BaeFostqi2uGVJsuRaplnutrxuhVo5WaVYVVpds0atna0l1rutu6cRp7lOk06rntZnw7Dxtsm2qbcZsOXYBtuutm22fWFnYhdnt8Wuw+6TvZN9un2N/T0HDYfZDqsdWh1+c7RyFDpWOt6azpzuP33F9JbpL2dYzxDP2DPjthPLKcRpnVOb00dnF2e5c4PziIuJS4LLLpc+Lpsbxt3IveRKdPVxXeF60vWdm7Obwu2o26/uNu5p7ofcn8w0nymeWTNz0MPIQ+BR5dE/C5+VMGvfrH5PQ0+BZ7XnIy9jL5FXrdewt6V3qvdh7xc+9j5yn+M+4zw33jLeWV/MN8C3yLfLT8Nvnl+F30N/I/9k/3r/0QCngCUBZwOJgUGBWwL7+Hp8Ib+OPzrbZfay2e1BjKC5QRVBj4KtguXBrSFoyOyQrSH355jOkc5pDoVQfujW0Adh5mGLw34MJ4WHhVeGP45wiFga0TGXNXfR3ENz30T6RJZE3ptnMU85ry1KNSo+qi5qPNo3ujS6P8YuZlnM1VidWElsSxw5LiquNm5svt/87fOH4p3iC+N7F5gvyF1weaHOwvSFpxapLhIsOpZATIhOOJTwQRAqqBaMJfITdyWOCnnCHcJnIi/RNtGI2ENcKh5O8kgqTXqS7JG8NXkkxTOlLOW5hCepkLxMDUzdmzqeFpp2IG0yPTq9MYOSkZBxQqohTZO2Z+pn5mZ2y6xlhbL+xW6Lty8elQfJa7OQrAVZLQq2QqboVFoo1yoHsmdlV2a/zYnKOZarnivN7cyzytuQN5zvn//tEsIS4ZK2pYZLVy0dWOa9rGo5sjxxedsK4xUFK4ZWBqw8uIq2Km3VT6vtV5eufr0mek1rgV7ByoLBtQFr6wtVCuWFfevc1+1dT1gvWd+1YfqGnRs+FYmKrhTbF5cVf9go3HjlG4dvyr+Z3JS0qavEuWTPZtJm6ebeLZ5bDpaql+aXDm4N2dq0Dd9WtO319kXbL5fNKNu7g7ZDuaO/PLi8ZafJzs07P1SkVPRU+lQ27tLdtWHX+G7R7ht7vPY07NXbW7z3/T7JvttVAVVN1WbVZftJ+7P3P66Jqun4lvttXa1ObXHtxwPSA/0HIw6217nU1R3SPVRSj9Yr60cOxx++/p3vdy0NNg1VjZzG4iNwRHnk6fcJ3/ceDTradox7rOEH0x92HWcdL2pCmvKaRptTmvtbYlu6T8w+0dbq3nr8R9sfD5w0PFl5SvNUyWna6YLTk2fyz4ydlZ19fi753GDborZ752PO32oPb++6EHTh0kX/i+c7vDvOXPK4dPKy2+UTV7hXmq86X23qdOo8/pPTT8e7nLuarrlca7nuer21e2b36RueN87d9L158Rb/1tWeOT3dvfN6b/fF9/XfFt1+cif9zsu72Xcn7q28T7xf9EDtQdlD3YfVP1v+3Njv3H9qwHeg89HcR/cGhYPP/pH1jw9DBY+Zj8uGDYbrnjg+OTniP3L96fynQ89kzyaeF/6i/suuFxYvfvjV69fO0ZjRoZfyl5O/bXyl/erA6xmv28bCxh6+yXgzMV70VvvtwXfcdx3vo98PT+R8IH8o/2j5sfVT0Kf7kxmTk/8EA5jz/GMzLdsAAAAgY0hSTQAAeiUAAICDAAD5/wAAgOkAAHUwAADqYAAAOpgAABdvkl/FRgAAAFtJREFUeNpi/P//PwMlgImBQsA44C6giQENDAwM//HgBmLCAF/AMBLjBUeixf///48L7/+PCvZjU4fPAAc0AxywqcMXCwegGJ1NckL6jx5wpKYDxqGXEkkCgAEAmrqBIejdgngAAAAASUVORK5CYII=);
+}
+
+table.treetable tr.accept {
+  background-color: #a3bce4;
+  color: #fff
+}
+
+table.treetable tr.collapsed.accept td span.indenter a {
+  background-image: url(data:image/x-png;base64,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);
+}
+
+table.treetable tr.expanded.accept td span.indenter a {
+  background-image: url(data:image/x-png;base64,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);
+}

bitbake/lib/toaster/toastergui/static/css/screen.css

@@ -0,0 +1,28 @@
+body {
+  background: #ddd;
+  color: #000;
+  font-family: Helvetica, Arial, sans-serif;
+  line-height: 1.5;
+  margin: 0;
+  padding: 0;
+}
+
+#main {
+  background: #fff;
+  border-left: 20px solid #eee;
+  border-right: 20px solid #eee;
+  margin: 0 auto;
+  max-width: 800px;
+  padding: 20px;
+}
+
+pre.listing {
+  background: #eee;
+  border: 1px solid #ccc;
+  margin: .6em 0 .3em 0;
+  padding: .1em .3em;
+}
+
+pre.listing b {
+  color: #f00;
+}

bitbake/lib/toaster/toastergui/static/jquery-treetable-license/GPL-LICENSE.txt

@@ -0,0 +1,278 @@
+        GNU GENERAL PUBLIC LICENSE
+           Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+          Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Lesser General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+        GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+          NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.

bitbake/lib/toaster/toastergui/static/jquery-treetable-license/MIT-LICENSE.txt

@@ -0,0 +1,20 @@
+Copyright (c) 2013 Ludo van den Boom, http://ludovandenboom.com
+
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of this software and associated documentation files (the
+"Software"), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish,
+distribute, sublicense, and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so, subject to
+the following conditions:
+
+The above copyright notice and this permission notice shall be
+included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

bitbake/lib/toaster/toastergui/static/jquery-treetable-license/README.md

@@ -0,0 +1,20 @@
+# jQuery treetable
+
+jQuery treetable is a plugin for jQuery, the 'Write Less, Do More, JavaScript
+Library'. With this plugin you can display a tree in an HTML table, e.g. a
+directory structure or a nested list. Why not use a list, you say? Because lists
+are great for displaying a tree, and tables are not. Oh wait, but this plugin
+uses tables, doesn't it? Yes. Why do I use a table to display a list? Because I
+need multiple columns to display additional data besides the tree.
+
+Download the latest release from the jQuery Plugin Registry or grab the source
+code from Github. Please report issues through Github issues. This plugin is
+released under both the MIT and the GPLv2 license by Ludo van den Boom.
+
+## Documentation and Examples
+
+See index.html for technical documentation and examples. The most recent version
+of this document is also available online at
+http://ludo.cubicphuse.nl/jquery-treetable. An AJAX enabled example built with
+Ruby on Rails can be found at
+https://github.com/ludo/jquery-treetable-ajax-example.

bitbake/lib/toaster/toastergui/static/jquery.treetable.theme.toaster.css

@@ -0,0 +1,66 @@
+/*
+table.treetable {
+  border: 1px solid #888; 
+  border-collapse: collapse;
+  font-size: .8em;
+  line-height: 1;
+  margin: .6em 0 1.8em 0;
+  width: 100%;
+}
+
+table.treetable caption {
+  font-size: .9em;
+  font-weight: bold;
+  margin-bottom: .2em;
+}
+
+table.treetable tbody tr td {
+  cursor: default;
+  padding: .3em 1em;
+}
+
+table.treetable span {
+  background-position: center left;
+  background-repeat: no-repeat;
+  padding: .2em 0 .2em 1.5em;
+}
+*/
+
+table.treetable span.file {
+  background-image: url(data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAABAAAAAQCAQAAAC1+jfqAAAABGdBTUEAAK/INwWK6QAAABl0RVh0U29mdHdhcmUAQWRvYmUgSW1hZ2VSZWFkeXHJZTwAAADoSURBVBgZBcExblNBGAbA2ceegTRBuIKOgiihSZNTcC5LUHAihNJR0kGKCDcYJY6D3/77MdOinTvzAgCw8ysThIvn/VojIyMjIyPP+bS1sUQIV2s95pBDDvmbP/mdkft83tpYguZq5Jh/OeaYh+yzy8hTHvNlaxNNczm+la9OTlar1UdA/+C2A4trRCnD3jS8BB1obq2Gk6GU6QbQAS4BUaYSQAf4bhhKKTFdAzrAOwAxEUAH+KEM01SY3gM6wBsEAQB0gJ+maZoC3gI6iPYaAIBJsiRmHU0AALOeFC3aK2cWAACUXe7+AwO0lc9eTHYTAAAAAElFTkSuQmCC);
+}
+
+table.treetable span.folder {
+  background-image: url(data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAABAAAAAQCAYAAAAf8/9hAAAABGdBTUEAAK/INwWK6QAAABl0RVh0U29mdHdhcmUAQWRvYmUgSW1hZ2VSZWFkeXHJZTwAAAGrSURBVDjLxZO7ihRBFIa/6u0ZW7GHBUV0UQQTZzd3QdhMQxOfwMRXEANBMNQX0MzAzFAwEzHwARbNFDdwEd31Mj3X7a6uOr9BtzNjYjKBJ6nicP7v3KqcJFaxhBVtZUAK8OHlld2st7Xl3DJPVONP+zEUV4HqL5UDYHr5xvuQAjgl/Qs7TzvOOVAjxjlC+ePSwe6DfbVegLVuT4r14eTr6zvA8xSAoBLzx6pvj4l+DZIezuVkG9fY2H7YRQIMZIBwycmzH1/s3F8AapfIPNF3kQk7+kw9PWBy+IZOdg5Ug3mkAATy/t0usovzGeCUWTjCz0B+Sj0ekfdvkZ3abBv+U4GaCtJ1iEm6ANQJ6fEzrG/engcKw/wXQvEKxSEKQxRGKE7Izt+DSiwBJMUSm71rguMYhQKrBygOIRStf4TiFFRBvbRGKiQLWP29yRSHKBTtfdBmHs0BUpgvtgF4yRFR+NUKi0XZcYjCeCG2smkzLAHkbRBmP0/Uk26O5YnUActBp1GsAI+S5nRJJJal5K1aAMrq0d6Tm9uI6zjyf75dAe6tx/SsWeD//o2/Ab6IH3/h25pOAAAAAElFTkSuQmCC);
+}
+
+table.treetable tr.collapsed span.indenter a {
+  background-image: url(data:image/png;base64,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);
+}
+
+table.treetable tr.expanded span.indenter a {
+  background-image: url(data:image/png;base64,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);
+}
+
+
+
+table.treetable tr.collapsed.selected span.indenter a {
+  background-image: url(data:image/png;base64,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);
+}
+
+table.treetable tr.expanded.selected span.indenter a {
+  background-image: url(data:image/png;base64,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);
+}
+
+table.treetable tr.accept {
+  background-color: #a3bce4;
+  color: #fff
+}
+
+table.treetable tr.collapsed.accept td span.indenter a {
+  background-image: url(data:image/x-png;base64,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);
+}
+
+table.treetable tr.expanded.accept td span.indenter a {
+  background-image: url(data:image/x-png;base64,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);
+}

bitbake/lib/toaster/toastergui/static/js/jquery.treetable.js

@@ -0,0 +1,620 @@
+/*
+ * jQuery treetable Plugin 3.1.0
+ * http://ludo.cubicphuse.nl/jquery-treetable
+ *
+ * Copyright 2013, Ludo van den Boom
+ * Dual licensed under the MIT or GPL Version 2 licenses.
+ */
+(function() {
+  var $, Node, Tree, methods;
+
+  $ = jQuery;
+
+  Node = (function() {
+    function Node(row, tree, settings) {
+      var parentId;
+
+      this.row = row;
+      this.tree = tree;
+      this.settings = settings;
+
+      // TODO Ensure id/parentId is always a string (not int)
+      this.id = this.row.data(this.settings.nodeIdAttr);
+
+      // TODO Move this to a setParentId function?
+      parentId = this.row.data(this.settings.parentIdAttr);
+      if (parentId != null && parentId !== "") {
+        this.parentId = parentId;
+      }
+
+      this.treeCell = $(this.row.children(this.settings.columnElType)[this.settings.column]);
+      this.expander = $(this.settings.expanderTemplate);
+      this.indenter = $(this.settings.indenterTemplate);
+      this.children = [];
+      this.initialized = false;
+      this.treeCell.prepend(this.indenter);
+    }
+
+    Node.prototype.addChild = function(child) {
+      return this.children.push(child);
+    };
+
+    Node.prototype.ancestors = function() {
+      var ancestors, node;
+      node = this;
+      ancestors = [];
+      while (node = node.parentNode()) {
+        ancestors.push(node);
+      }
+      return ancestors;
+    };
+
+    Node.prototype.collapse = function() {
+      if (this.collapsed()) {
+        return this;
+      }
+
+      this.row.removeClass("expanded").addClass("collapsed");
+
+      this._hideChildren();
+      this.expander.attr("title", this.settings.stringExpand);
+
+      if (this.initialized && this.settings.onNodeCollapse != null) {
+        this.settings.onNodeCollapse.apply(this);
+      }
+
+      return this;
+    };
+
+    Node.prototype.collapsed = function() {
+      return this.row.hasClass("collapsed");
+    };
+
+    // TODO destroy: remove event handlers, expander, indenter, etc.
+
+    Node.prototype.expand = function() {
+      if (this.expanded()) {
+        return this;
+      }
+
+      this.row.removeClass("collapsed").addClass("expanded");
+
+      if (this.initialized && this.settings.onNodeExpand != null) {
+        this.settings.onNodeExpand.apply(this);
+      }
+
+      if ($(this.row).is(":visible")) {
+        this._showChildren();
+      }
+
+      this.expander.attr("title", this.settings.stringCollapse);
+
+      return this;
+    };
+
+    Node.prototype.expanded = function() {
+      return this.row.hasClass("expanded");
+    };
+
+    Node.prototype.hide = function() {
+      this._hideChildren();
+      this.row.hide();
+      return this;
+    };
+
+    Node.prototype.isBranchNode = function() {
+      if(this.children.length > 0 || this.row.data(this.settings.branchAttr) === true) {
+        return true;
+      } else {
+        return false;
+      }
+    };
+
+    Node.prototype.updateBranchLeafClass = function(){
+      this.row.removeClass('branch');
+      this.row.removeClass('leaf');
+      this.row.addClass(this.isBranchNode() ? 'branch' : 'leaf');
+    };
+
+    Node.prototype.level = function() {
+      return this.ancestors().length;
+    };
+
+    Node.prototype.parentNode = function() {
+      if (this.parentId != null) {
+        return this.tree[this.parentId];
+      } else {
+        return null;
+      }
+    };
+
+    Node.prototype.removeChild = function(child) {
+      var i = $.inArray(child, this.children);
+      return this.children.splice(i, 1)
+    };
+
+    Node.prototype.render = function() {
+      var handler,
+          settings = this.settings,
+          target;
+
+      if (settings.expandable === true && this.isBranchNode()) {
+        handler = function(e) {
+          $(this).parents("table").treetable("node", $(this).parents("tr").data(settings.nodeIdAttr)).toggle();
+          return e.preventDefault();
+        };
+
+        this.indenter.html(this.expander);
+        target = settings.clickableNodeNames === true ? this.treeCell : this.expander;
+
+        target.off("click.treetable").on("click.treetable", handler);
+        target.off("keydown.treetable").on("keydown.treetable", function(e) {
+          if (e.keyCode == 13) {
+            handler.apply(this, [e]);
+          }
+        });
+      }
+
+      this.indenter[0].style.paddingLeft = "" + (this.level() * settings.indent) + "px";
+
+      return this;
+    };
+
+    Node.prototype.reveal = function() {
+      if (this.parentId != null) {
+        this.parentNode().reveal();
+      }
+      return this.expand();
+    };
+
+    Node.prototype.setParent = function(node) {
+      if (this.parentId != null) {
+        this.tree[this.parentId].removeChild(this);
+      }
+      this.parentId = node.id;
+      this.row.data(this.settings.parentIdAttr, node.id);
+      return node.addChild(this);
+    };
+
+    Node.prototype.show = function() {
+      if (!this.initialized) {
+        this._initialize();
+      }
+      this.row.show();
+      if (this.expanded()) {
+        this._showChildren();
+      }
+      return this;
+    };
+
+    Node.prototype.toggle = function() {
+      if (this.expanded()) {
+        this.collapse();
+      } else {
+        this.expand();
+      }
+      return this;
+    };
+
+    Node.prototype._hideChildren = function() {
+      var child, _i, _len, _ref, _results;
+      _ref = this.children;
+      _results = [];
+      for (_i = 0, _len = _ref.length; _i < _len; _i++) {
+        child = _ref[_i];
+        _results.push(child.hide());
+      }
+      return _results;
+    };
+
+    Node.prototype._initialize = function() {
+      var settings = this.settings;
+
+      this.render();
+
+      if (settings.expandable === true && settings.initialState === "collapsed") {
+        this.collapse();
+      } else {
+        this.expand();
+      }
+
+      if (settings.onNodeInitialized != null) {
+        settings.onNodeInitialized.apply(this);
+      }
+
+      return this.initialized = true;
+    };
+
+    Node.prototype._showChildren = function() {
+      var child, _i, _len, _ref, _results;
+      _ref = this.children;
+      _results = [];
+      for (_i = 0, _len = _ref.length; _i < _len; _i++) {
+        child = _ref[_i];
+        _results.push(child.show());
+      }
+      return _results;
+    };
+
+    return Node;
+  })();
+
+  Tree = (function() {
+    function Tree(table, settings) {
+      this.table = table;
+      this.settings = settings;
+      this.tree = {};
+
+      // Cache the nodes and roots in simple arrays for quick access/iteration
+      this.nodes = [];
+      this.roots = [];
+    }
+
+    Tree.prototype.collapseAll = function() {
+      var node, _i, _len, _ref, _results;
+      _ref = this.nodes;
+      _results = [];
+      for (_i = 0, _len = _ref.length; _i < _len; _i++) {
+        node = _ref[_i];
+        _results.push(node.collapse());
+      }
+      return _results;
+    };
+
+    Tree.prototype.expandAll = function() {
+      var node, _i, _len, _ref, _results;
+      _ref = this.nodes;
+      _results = [];
+      for (_i = 0, _len = _ref.length; _i < _len; _i++) {
+        node = _ref[_i];
+        _results.push(node.expand());
+      }
+      return _results;
+    };
+
+    Tree.prototype.findLastNode = function (node) {
+      if (node.children.length > 0) {
+        return this.findLastNode(node.children[node.children.length - 1]);
+      } else {
+        return node;
+      }
+    };
+
+    Tree.prototype.loadRows = function(rows) {
+      var node, row, i;
+
+      if (rows != null) {
+        for (i = 0; i < rows.length; i++) {
+          row = $(rows[i]);
+
+          if (row.data(this.settings.nodeIdAttr) != null) {
+            node = new Node(row, this.tree, this.settings);
+            this.nodes.push(node);
+            this.tree[node.id] = node;
+
+            if (node.parentId != null) {
+              this.tree[node.parentId].addChild(node);
+            } else {
+              this.roots.push(node);
+            }
+          }
+        }
+      }
+
+      for (i = 0; i < this.nodes.length; i++) {
+        node = this.nodes[i].updateBranchLeafClass();
+      }
+
+      return this;
+    };
+
+    Tree.prototype.move = function(node, destination) {
+      // Conditions:
+      // 1: +node+ should not be inserted as a child of +node+ itself.
+      // 2: +destination+ should not be the same as +node+'s current parent (this
+      //    prevents +node+ from being moved to the same location where it already
+      //    is).
+      // 3: +node+ should not be inserted in a location in a branch if this would
+      //    result in +node+ being an ancestor of itself.
+      var nodeParent = node.parentNode();
+      if (node !== destination && destination.id !== node.parentId && $.inArray(node, destination.ancestors()) === -1) {
+        node.setParent(destination);
+        this._moveRows(node, destination);
+
+        // Re-render parentNode if this is its first child node, and therefore
+        // doesn't have the expander yet.
+        if (node.parentNode().children.length === 1) {
+          node.parentNode().render();
+        }
+      }
+
+      if(nodeParent){
+        nodeParent.updateBranchLeafClass();
+      }
+      if(node.parentNode()){
+        node.parentNode().updateBranchLeafClass();
+      }
+      node.updateBranchLeafClass();
+      return this;
+    };
+
+    Tree.prototype.removeNode = function(node) {
+      // Recursively remove all descendants of +node+
+      this.unloadBranch(node);
+
+      // Remove node from DOM (<tr>)
+      node.row.remove();
+
+      // Clean up Tree object (so Node objects are GC-ed)
+      delete this.tree[node.id];
+      this.nodes.splice($.inArray(node, this.nodes), 1);
+    }
+
+    Tree.prototype.render = function() {
+      var root, _i, _len, _ref;
+      _ref = this.roots;
+      for (_i = 0, _len = _ref.length; _i < _len; _i++) {
+        root = _ref[_i];
+
+        // Naming is confusing (show/render). I do not call render on node from
+        // here.
+        root.show();
+      }
+      return this;
+    };
+
+    Tree.prototype.sortBranch = function(node, sortFun) {
+      // First sort internal array of children
+      node.children.sort(sortFun);
+
+      // Next render rows in correct order on page
+      this._sortChildRows(node);
+
+      return this;
+    };
+
+    Tree.prototype.unloadBranch = function(node) {
+      var children, i;
+
+      for (i = 0; i < node.children.length; i++) {
+        this.removeNode(node.children[i]);
+      }
+
+      // Reset node's collection of children
+      node.children = [];
+
+      node.updateBranchLeafClass();
+
+      return this;
+    };
+
+    Tree.prototype._moveRows = function(node, destination) {
+      var children = node.children, i;
+
+      node.row.insertAfter(destination.row);
+      node.render();
+
+      // Loop backwards through children to have them end up on UI in correct
+      // order (see #112)
+      for (i = children.length - 1; i >= 0; i--) {
+        this._moveRows(children[i], node);
+      }
+    };
+
+    // Special _moveRows case, move children to itself to force sorting
+    Tree.prototype._sortChildRows = function(parentNode) {
+      return this._moveRows(parentNode, parentNode);
+    };
+
+    return Tree;
+  })();
+
+  // jQuery Plugin
+  methods = {
+    init: function(options, force) {
+      var settings;
+
+      settings = $.extend({
+        branchAttr: "ttBranch",
+        clickableNodeNames: false,
+        column: 0,
+        columnElType: "td", // i.e. 'td', 'th' or 'td,th'
+        expandable: false,
+        expanderTemplate: "<a href='#'>&nbsp;</a>",
+        indent: 19,
+        indenterTemplate: "<span class='indenter'></span>",
+        initialState: "collapsed",
+        nodeIdAttr: "ttId", // maps to data-tt-id
+        parentIdAttr: "ttParentId", // maps to data-tt-parent-id
+        stringExpand: "Expand",
+        stringCollapse: "Collapse",
+
+        // Events
+        onInitialized: null,
+        onNodeCollapse: null,
+        onNodeExpand: null,
+        onNodeInitialized: null
+      }, options);
+
+      return this.each(function() {
+        var el = $(this), tree;
+
+        if (force || el.data("treetable") === undefined) {
+          tree = new Tree(this, settings);
+          tree.loadRows(this.rows).render();
+
+          el.addClass("treetable").data("treetable", tree);
+
+          if (settings.onInitialized != null) {
+            settings.onInitialized.apply(tree);
+          }
+        }
+
+        return el;
+      });
+    },
+
+    destroy: function() {
+      return this.each(function() {
+        return $(this).removeData("treetable").removeClass("treetable");
+      });
+    },
+
+    collapseAll: function() {
+      this.data("treetable").collapseAll();
+      return this;
+    },
+
+    collapseNode: function(id) {
+      var node = this.data("treetable").tree[id];
+
+      if (node) {
+        node.collapse();
+      } else {
+        throw new Error("Unknown node '" + id + "'");
+      }
+
+      return this;
+    },
+
+    expandAll: function() {
+      this.data("treetable").expandAll();
+      return this;
+    },
+
+    expandNode: function(id) {
+      var node = this.data("treetable").tree[id];
+
+      if (node) {
+        if (!node.initialized) {
+          node._initialize();
+        }
+
+        node.expand();
+      } else {
+        throw new Error("Unknown node '" + id + "'");
+      }
+
+      return this;
+    },
+
+    loadBranch: function(node, rows) {
+      var settings = this.data("treetable").settings,
+          tree = this.data("treetable").tree;
+
+      // TODO Switch to $.parseHTML
+      rows = $(rows);
+
+      if (node == null) { // Inserting new root nodes
+        this.append(rows);
+      } else {
+        var lastNode = this.data("treetable").findLastNode(node);
+        rows.insertAfter(lastNode.row);
+      }
+
+      this.data("treetable").loadRows(rows);
+
+      // Make sure nodes are properly initialized
+      rows.filter("tr").each(function() {
+        tree[$(this).data(settings.nodeIdAttr)].show();
+      });
+
+      if (node != null) {
+        // Re-render parent to ensure expander icon is shown (#79)
+        node.render().expand();
+      }
+
+      return this;
+    },
+
+    move: function(nodeId, destinationId) {
+      var destination, node;
+
+      node = this.data("treetable").tree[nodeId];
+      destination = this.data("treetable").tree[destinationId];
+      this.data("treetable").move(node, destination);
+
+      return this;
+    },
+
+    node: function(id) {
+      return this.data("treetable").tree[id];
+    },
+
+    removeNode: function(id) {
+      var node = this.data("treetable").tree[id];
+
+      if (node) {
+        this.data("treetable").removeNode(node);
+      } else {
+        throw new Error("Unknown node '" + id + "'");
+      }
+
+      return this;
+    },
+
+    reveal: function(id) {
+      var node = this.data("treetable").tree[id];
+
+      if (node) {
+        node.reveal();
+      } else {
+        throw new Error("Unknown node '" + id + "'");
+      }
+
+      return this;
+    },
+
+    sortBranch: function(node, columnOrFunction) {
+      var settings = this.data("treetable").settings,
+          prepValue,
+          sortFun;
+
+      columnOrFunction = columnOrFunction || settings.column;
+      sortFun = columnOrFunction;
+
+      if ($.isNumeric(columnOrFunction)) {
+        sortFun = function(a, b) {
+          var extractValue, valA, valB;
+
+          extractValue = function(node) {
+            var val = node.row.find("td:eq(" + columnOrFunction + ")").text();
+            // Ignore trailing/leading whitespace and use uppercase values for
+            // case insensitive ordering
+            return $.trim(val).toUpperCase();
+          }
+
+          valA = extractValue(a);
+          valB = extractValue(b);
+
+          if (valA < valB) return -1;
+          if (valA > valB) return 1;
+          return 0;
+        };
+      }
+
+      this.data("treetable").sortBranch(node, sortFun);
+      return this;
+    },
+
+    unloadBranch: function(node) {
+      this.data("treetable").unloadBranch(node);
+      return this;
+    }
+  };
+
+  $.fn.treetable = function(method) {
+    if (methods[method]) {
+      return methods[method].apply(this, Array.prototype.slice.call(arguments, 1));
+    } else if (typeof method === 'object' || !method) {
+      return methods.init.apply(this, arguments);
+    } else {
+      return $.error("Method " + method + " does not exist on jQuery.treetable");
+    }
+  };
+
+  // Expose classes to world
+  this.TreeTable || (this.TreeTable = {});
+  this.TreeTable.Node = Node;
+  this.TreeTable.Tree = Tree;
+}).call(this);

bitbake/lib/toaster/toastergui/static/js/main.js

@@ -44,6 +44,11 @@ $(document).ready(function() {
 	// enable tooltips for applied filters
 	$('th a.btn-primary').tooltip({container:'body', html:true, placement:'bottom', delay:{hide:1500}});
 
+	// hide applied filter tooltip when you click on the filter button
+	$('th a.btn-primary').click(function () {
+		$('.tooltip').hide();
+	});
+
 	// enable help information tooltip
     $(".get-help").tooltip({container:'body', html:true, delay:{show:300}});
 
@@ -70,4 +75,37 @@ $(document).ready(function() {
   		});
 	});
 
+	// toggle for long content (variables, python stack trace, etc)
+    $('.full, .full-hide').hide();
+    $('.full-show').click(function(){
+    	$('.full').slideDown(function(){
+        	$('.full-hide').show();
+        });
+        $(this).hide();
+    });
+    $('.full-hide').click(function(){
+    	$(this).hide();
+        $('.full').slideUp(function(){
+            $('.full-show').show();
+        });
+    });
+
+    //toggle the errors and warnings sections
+    $('.show-errors').click(function() {
+        $('#collapse-errors').addClass('in');
+    });
+    $('.toggle-errors').click(function() {
+        $('#collapse-errors').toggleClass('in');
+    });
+    $('.show-warnings').click(function() {
+        $('#collapse-warnings').addClass('in');
+    });
+    $('.toggle-warnings').click(function() {
+        $('#collapse-warnings').toggleClass('in');
+    });
+    //show warnings section when requested from the previous page
+    if (location.href.search('#warnings') > -1) {
+        $('#collapse-warnings').addClass('in');
+    }
+        
 });

bitbake/lib/toaster/toastergui/templates/base.html

@@ -22,9 +22,14 @@
 <script>
 function reload_params(params) {
     uri = window.location.href;
-    [url, parameters] = uri.split("?");
+    splitlist = uri.split("?");
+    url = splitlist[0], parameters=splitlist[1];
     // deserialize the call parameters
-    cparams = parameters.split("&");
+    if(parameters){
+        cparams = parameters.split("&");
+    }else{
+        cparams = []
+    }
     nparams = {}
     for (i = 0; i < cparams.length; i++) {
         temp = cparams[i].split("=");
@@ -43,6 +48,9 @@ function reload_params(params) {
 
 }
 </script>
+
+{% block extraheadcontent %}
+{% endblock %}
     </head>
 
 <body style="height: 100%">
@@ -50,7 +58,7 @@ function reload_params(params) {
     <div class="navbar-inner">
             <a class="brand logo" href="#"><img src="{% static 'img/logo.png' %}" class="" alt="Yocto logo project"/></a>
             <a class="brand" href="/">Toaster</a>
-            <a class="pull-right manual" href="#">
+            <a class="pull-right manual" target="_blank" href="http://www.yoctoproject.org/documentation/toaster-manual">
                 <i class="icon-book"></i>
                 Toaster manual
             </a>

bitbake/lib/toaster/toastergui/templates/basebuilddetailpage.html

@@ -7,7 +7,7 @@
     <div class="section">
         <ul class="breadcrumb" id="breadcrumb">
             <li><a href="{% url 'all-builds' %}">All builds</a></li>
-            <li><a href="{%url 'builddashboard' build.pk%}">{{build.target_set.all.0.target}} {%if build.target_set.all.count > 1%}(+ {{build.target_set.all.count|add:"-1"}}){%endif%} {{build.machine}} ({{build.completed_on|naturaltime}})</a></li>
+            <li><a href="{%url 'builddashboard' build.pk%}">{{build.target_set.all.0.target}} {%if build.target_set.all.count > 1%}(+ {{build.target_set.all.count|add:"-1"}}){%endif%} {{build.machine}} ({{build.completed_on|date:"d/m/y H:i"}})</a></li>
             {% block localbreadcrumb %}{% endblock %}
         </ul>
         <script>

bitbake/lib/toaster/toastergui/templates/basebuildpage.html

@@ -1,4 +1,5 @@
 {% extends "base.html" %}
+{% load projecttags %}
 {% load humanize %}
 {% block pagecontent %}
 
@@ -8,7 +9,13 @@
     <div class="section">
         <ul class="breadcrumb" id="breadcrumb">
 <li><a href="{% url 'all-builds' %}">All builds</a></li>
-<li><a href="{%url 'builddashboard' build.pk%}">{{build.target_set.all.0.target}} {%if build.target_set.all.count > 1%}(+ {{build.target_set.all.count|add:"-1"}}){%endif%} {{build.machine}} ({{build.completed_on|date:"d/m/y H:i"}})</a></li>
+            <li>
+            {% block parentbreadcrumb %}
+            <a href="{%url 'builddashboard' build.pk%}">
+                {{build.get_sorted_target_list.0.target}} {%if build.target_set.all.count > 1%}(+ {{build.target_set.all.count|add:"-1"}}){%endif%} {{build.machine}} ({{build.completed_on|date:"d/m/y H:i"}})
+            </a>
+            {% endblock %}
+            </li>
             {% block localbreadcrumb %}{% endblock %}
         </ul>
         <script>
@@ -25,19 +32,37 @@
         <!-- begin left sidebar container -->
         <div id="nav" class="span2">
             <ul class="nav nav-list well">
+              {% if build.target_set.all.0.is_image and build.outcome == 0 %}
                 <li class="nav-header">Images</li>
-            {% for t in build.target_set.all %}
-                <li><a href="{% url 'target' build.pk t.pk %}">{{t.target}}</a><li>
-            {% endfor %}
-                <li class="nav-header">Build</li>
-                <li><a href="{% url 'configuration' build.pk %}">Configuration</a></li>
-                <li><a href="{% url 'tasks' build.pk %}">Tasks</a></li>
-                <li><a href="{% url 'recipes' build.pk %}">Recipes</a></li>
-                <li><a href="{% url 'packages' build.pk %}">Packages</a></li>
-                <li class="nav-header">Performance</li>
-                <li><a href="{% url 'buildtime' build.pk %}">Time</a></li>
-                <li><a href="{% url 'cpuusage' build.pk %}">CPU usage</a></li>
-                <li><a href="{% url 'diskio' build.pk %}">Disk I/O</a></li>
+                {% block nav-target %}
+                  {% for t in build.get_sorted_target_list %}
+                    <li><a href="{% url 'target' build.pk t.pk %}">{{t.target}}</a><li>
+                  {% endfor %}
+                {% endblock %}
+              {% endif %}
+              <li class="nav-header">Build</li>
+              {% block nav-configuration %}
+                  <li><a href="{% url 'configuration' build.pk %}">Configuration</a></li>
+              {% endblock %}
+              {% block nav-tasks %}
+                  <li><a href="{% url 'tasks' build.pk %}">Tasks</a></li>
+              {% endblock %}
+              {% block nav-recipes %}
+                  <li><a href="{% url 'recipes' build.pk %}">Recipes</a></li>
+              {% endblock %}
+              {% block nav-packages %}
+                  <li><a href="{% url 'packages' build.pk %}">Packages</a></li>
+              {% endblock %}
+                  <li class="nav-header">Performance</li>
+              {% block nav-buildtime %}
+                  <li><a href="{% url 'buildtime' build.pk %}">Time</a></li>
+              {% endblock %}
+              {% block nav-cpuusage %}
+                  <li><a href="{% url 'cpuusage' build.pk %}">CPU usage</a></li>
+              {% endblock %}
+              {% block nav-diskio %}
+                  <li><a href="{% url 'diskio' build.pk %}">Disk I/O</a></li>
+              {% endblock %}
             </ul>
         </div>
         <!-- end left sidebar container -->

bitbake/lib/toaster/toastergui/templates/basetable_bottom.html

@@ -44,7 +44,8 @@
     setting = save.split(';');
     for ( i = 0; i < setting.length; i++) {
         if (setting[i].length > 0) {
-            [id, v] = setting[i].split(':');
+            splitlist = setting[i].split(':');
+            id = splitlist[0], v = splitlist[1];
             if (v == 'true') {
                 $('.chbxtoggle#'+id).prop('checked', true);
             }

bitbake/lib/toaster/toastergui/templates/basetable_top.html

@@ -1,18 +1,43 @@
 {% load projecttags %}
 <!-- component to display a generic table -->
     <script>
-    function showhideTableColumn(clname, sh) {
-        if (sh) $('.' + clname).show(100);
-        else $('.' + clname).hide(100);
 
-	// save cookie for all checkboxes
-	save = '';
-	$('.chbxtoggle').each(function() { if ($(this).attr('id') != undefined) { save += ';' + $(this).attr('id') +':'+ $(this).is(':checked')} })
-	$.cookie('_displaycols_{{objectname}}',  save);
-	save = '';
+    //
+    // most of the following javascript is for managing the 'Edit Columns'
+    // pop-up dialog and actions. the idea is that there are 2 types
+    // of actions: immediate - performed while the dialog is still
+    // visible - hide/show columns, and delayed - performed when the
+    // dialog becomes invisible - any resorting if necessary.
+    //
+    // When the dialog is open, an interval timer is set up to
+    // determine if the dialog is still visible. when the dialog
+    // closes - goes invisible, the delayed actions are performed.
+    //
+    // the interval timer and interrupt handler is a way of simulating
+    // an onclose event. there is probably a simpler way to do this
+    // however the pop-up window id was elusive.
+    //
+
+    var editColTimer;
+    var editColAction;
+
+    //
+    // this is the target function of the interval timeout.
+    // check to see if the dialog is visible. if the dialog
+    // has gone invisible since the last check, take any delayed
+    // actions indicated in the action list and clear the timer.
+    //
+
+    function checkVisible( ) {
+        editcol = document.getElementById( 'editcol' );
+        if ( editcol.offsetWidth <= 0 ) {
+            clearInterval( editColTimer );
+            editColTimer = false;
+            hideshowColumns( );
+            editColAction = [ ];
+        }
     }
 
-
     function filterTableRows(test) {
         if (test.length > 0) {
             var r = test.split(/[ ,]+/).map(function (e) { return new RegExp(e, 'i') });
@@ -24,18 +49,123 @@
             $('tr.data').show();
         }
     }
+
+    //
+    // determine the value of the indicated url arg.
+    // this is needed to determine whether a resort
+    // is necessary. it looks like a lot of gorp stuff
+    // but its actually pretty simple.
+    //
+
+    function getURLParameter( name ) {
+        return decodeURIComponent((new RegExp('[?|&]' + name + '=' +
+          '([^&;]+?)(&|#|;|$)').exec(location.search)||[,""])[1].replace(/\+/g,
+          '%20'))||null
+    }
+
+    //
+    // when the dialog box goes invisible
+    // this function is called to interpret
+    // the action list and take any delayed actions necessary.
+    // the editColAction list is a hash table with
+    // the column name as the hash key, the hash value
+    // is a 2 element list. the first element is a flag
+    // indicating whether the column is on or off. the
+    // 2nd element is the sort order indicator for the column.
+    //
+
+    function hideshowColumns( ) {
+        for( var k in editColAction ) {
+            showhideDelayedTableAction( k, editColAction[ k ][ 0 ], editColAction[ k ][ 1 ]);
+        }
+    }
+
+    //
+    // this function actually performs the delayed table actions
+    // namely any resorting if necessary
+    //
+
+    function showhideDelayedTableAction( clname, sh, orderkey ) {
+        if ( !sh ) {
+            p = getURLParameter( "orderby" ).split( ":" )[ 0 ];
+            if ( p == orderkey ) {
+                reload_params({ 'orderby' : '{{default_orderby}}'});
+            }
+        }
+    }
+
+    //
+    // this function actually performs the immediate table actions
+    // namely any colums that need to be hidden/shown
+    //
+
+    function showhideImmediateTableAction( clname, sh, orderkey ) {
+        if ( sh ) {
+            $( '.' + clname ).show( 100 );
+        }
+        else {
+            $( '.' + clname ).hide( 100 );
+        }
+
+	// save cookie for all checkboxes
+	save = '';
+	$( '.chbxtoggle' ).each(function( ) {
+            if ( $( this ).attr( 'id' ) != undefined ) {
+                save += ';' + $( this ).attr( 'id' ) +':'+ $( this ).is( ':checked' )
+            }
+        });
+	$.cookie( '_displaycols_{{objectname}}', save );
+	save = '';
+    }
+
+    //
+    // this is the onclick handler for all of the check box
+    // items in edit columns dialog
+    //
+
+    function showhideTableColumn( clname, sh, orderkey ) {
+        editcol = document.getElementById( 'editcol' );
+        if ( editcol.offsetWidth <= 0 ) {
+
+            //
+            // this path is taken when the page is first
+            // getting initialized - no dialog visible,
+            // perform both the immediate and delayed actions
+            //
+
+            showhideImmediateTableAction( clname, sh, orderkey );
+            showhideDelayedTableAction( clname, sh, orderkey );
+            return;
+        }
+        if ( !editColTimer ) {
+
+            //
+            // we don't have a timer active so set one up
+            // and clear the action list
+            //
+
+            editColTimer = setInterval( checkVisible, 250 );
+            editColAction = [ ];
+        }
+
+        //
+        // save the action to be taken when the dialog closes
+        //
+
+        editColAction[ clname ] = [ sh, orderkey ];
+        showhideImmediateTableAction( clname, sh, orderkey );
+    }
+
     </script>
 
 <!-- control header -->
 <div class="navbar">
     <div class="navbar-inner">
         <form class="navbar-search input-append pull-left" id="searchform">
-	<div class="input-append" style="padding-right:1em">
-            <input class="input-xxlarge" id="search" name="search" type="text" placeholder="Search {{objectname}}" value="{{request.GET.search}}"/>{% if request.GET.search %}<a href="javascript:$('#search').val('');searchform.submit()" class="add-on"><i class="icon-remove"></i></a>{%endif%}
-	</div>
-	    <input type="hidden" name="orderby" value="{{request.GET.orderby}}">
-	    <input type="hidden" name="page" value="1">
-            <input class="btn" type="submit" value="Search"/>
+            <input class="input-xxlarge" id="search" name="search" type="text" placeholder="Search {%if object_search_display %}{{object_search_display}}{%else%}{{objectname}}{%endif%}" value="{{request.GET.search}}"/>{% if request.GET.search %}<a href="javascript:$('#search').val('');searchform.submit()" class="add-on btn" tabindex="-1"><i class="icon-remove"></i></a>{%endif%}
+            <input type="hidden" name="orderby" value="{{request.GET.orderby}}">
+            <input type="hidden" name="page" value="1">
+            <button class="btn" type="submit" value="Search">Search</button>
         </form>
         <div class="pull-right">
 {% if tablecols %}
@@ -46,12 +176,27 @@
 <!--
 	{{tablecols|sortcols}}
 -->
-                <ul class="dropdown-menu">{% for i in tablecols|sortcols %}
+                <ul id='editcol' class="dropdown-menu">
+                  {% for i in tablecols|sortcols %}
                     <li>
-                        <label class="checkbox">
-                            <input type="checkbox" class="chbxtoggle" {% if i.clclass %}id="{{i.clclass}}" value="ct{{i.name}}" {% if not i.hidden %}checked="checked"{%endif%} onchange="showhideTableColumn($(this).attr('id'), $(this).is(':checked'))" {%else%} checked disabled{% endif %}/>   {{i.name}}
+                        <label {% if not i.clclass %} class="checkbox muted" {%else%} class="checkbox" {%endif%}>
+                            <input type="checkbox" class="chbxtoggle"
+                                   {% if i.clclass %}
+                                       id="{{i.clclass}}"
+                                       value="ct{{i.name}}"
+                                       {% if not i.hidden %}
+                                           checked="checked"
+                                       {%endif%}
+                                       onclick="showhideTableColumn(
+                                           $(this).attr('id'),
+                                           $(this).is(':checked'),
+                                           '{{i.orderkey}}' )"
+                                   {%else%}
+                                       checked disabled
+                                   {% endif %}/>   {{i.name}}
                         </label>
-                    </li>{% endfor %}
+                    </li>
+                  {% endfor %}
                 </ul>
             </div>
 {% endif %}
@@ -75,11 +220,11 @@
         <!-- Table header row; generated from "tablecols" entry in the context dict -->
         <tr>
             {% for tc in tablecols %}<th class="{{tc.dclass}} {{tc.clclass}}">
-                {%if tc.qhelp%}<i class="icon-question-sign get-help" data-toggle="tooltip" title="{{tc.qhelp}}"></i>{%endif%}
-                {%if tc.orderfield%}<a {%if tc.ordericon%} class="sorted" {%endif%}href="javascript:reload_params({'orderby' : '{{tc.orderfield}}' })" >{{tc.name}}</a>{%else%}<span class="muted">{{tc.name}}</span>{%endif%}
+                {%if tc.qhelp%}<i class="icon-question-sign get-help" title="{{tc.qhelp}}"></i>{%endif%}
+                {%if tc.orderfield%}<a {%if tc.ordericon%} class="sorted" {%endif%}href="javascript:reload_params({'page': 1, 'orderby' : '{{tc.orderfield}}' })" >{{tc.name}}</a>{%else%}<span class="muted">{{tc.name}}</span>{%endif%}
                 {%if tc.ordericon%} <i class="icon-caret-{{tc.ordericon}}"></i>{%endif%}
                 {%if tc.filter%}<div class="btn-group pull-right">
-                    <a href="#filter_{{tc.filter.class}}" role="button" class="btn btn-mini {%if request.GET.filter%}{{tc.filter.options|filtered_icon:request.GET.filter}} {%endif%}" {%if request.GET.filter%} title="<p>{{tc.filter.options|filtered_tooltip:request.GET.filter}}</p><p><a class='btn btn-small btn-primary' href=javascript:reload_params({'filter':''})>Show all {{objectname}}</a></p>" {%endif%} data-toggle="modal"> <i class="icon-filter filtered"></i> </a>
+                    <a href="#filter_{{tc.filter.class}}" role="button" class="btn btn-mini {%if request.GET.filter%}{{tc.filter.options|filtered_icon:request.GET.filter}} {%endif%}" {%if request.GET.filter and tc.filter.options|filtered_tooltip:request.GET.filter %} title="<p>{{tc.filter.options|filtered_tooltip:request.GET.filter}}</p><p><a class='btn btn-small btn-primary' href=javascript:reload_params({'filter':''})>Show all {% if filter_search_display %}{{filter_search_display}}{% else %}{{objectname}}{% endif %}</a></p>" {%endif%} data-toggle="modal"> <i class="icon-filter filtered"></i> </a>
                 </div>{%endif%}
             </th>{% endfor %}
         </tr>

bitbake/lib/toaster/toastergui/templates/bpackage.html

@@ -6,21 +6,54 @@
 <li>Packages</li>
 {% endblock %}
 
+{% block nav-packages %}
+  <li class="active"><a href="{% url 'packages' build.pk %}">Packages</a></li>
+{% endblock %}
+
 {% block buildinfomain %}
 <div class="span10">
-<div class="page-header" style="margin-top:40px;">
-<h1>
-  {% if request.GET.filter or request.GET.search and objects.count > 0  %}
+
+{% if not request.GET.filter and not request.GET.search and not objects.paginator.count %}
+
+<!-- Empty - no data in database -->
+<div class="page-header">
+    <h1>
+        Packages
+    </h1>
+</div>
+<div class="alert alert-info lead">
+    <strong>No packages were built.</strong> How did this happen? Well, BitBake reuses as much stuff as possible.
+    If all of the packages needed were already built and available in your build infrastructure, BitBake
+    will not rebuild any of them. This might be slightly confusing, but it does make everything faster.
+</div>
+
+{% else %}
+
+<div class="page-header">
+  <h1>
+  {% if request.GET.search and objects.paginator.count > 0  %}
       {{objects.paginator.count}} package{{objects.paginator.count|pluralize}} found
-  {%elif objects.paginator.count == 0%}
-      No Packages
+  {%elif request.GET.search and objects.paginator.count == 0%}
+      No packages found
   {%else%}
       Packages
   {%endif%}
- </h1>
+  </h1>
 </div>
 
-{% include "basetable_top.html" %}
+  {% if objects.paginator.count == 0 %}
+  <div class="row-fluid">
+      <div class="alert">
+        <form class="no-results input-append" id="searchform">
+            <input id="search" name="search" class="input-xxlarge" type="text" value="{{request.GET.search}}"/>{% if request.GET.search %}<a href="javascript:$('#search').val('');searchform.submit()" class="add-on btn" tabindex="-1"><i class="icon-remove"></i></a>{% endif %}
+            <button class="btn" type="submit" value="Search">Search</button>
+            <button class="btn btn-link" onclick="javascript:$('#search').val('');searchform.submit()">Show all packages</button>
+        </form>
+      </div>
+  </div>
+
+  {% else %}
+  {% include "basetable_top.html" %}
 
     {% for package in objects %}
 
@@ -31,7 +64,7 @@
         <!-- Package Version -->
         <td>{%if package.version%}<a href="{% url "package_built_detail" build.pk package.pk %}">{{package.version}}-{{package.revision}}</a>{%endif%}</td>
         <!-- Package Size -->
-        <td class="size">{{package.size|filtered_filesizeformat}}</td>
+        <td class="size sizecol">{{package.size|filtered_filesizeformat}}</td>
         <!-- License -->
         <td class="license">{{package.license}}</td>
 
@@ -68,6 +101,8 @@
     </tr>
     {% endfor %}
 
-{% include "basetable_bottom.html" %}
+  {% include "basetable_bottom.html" %}
+  {% endif %} {# objects.paginator.count #}
+{% endif %} {# Empty #}
 </div>
 {% endblock %}

bitbake/lib/toaster/toastergui/templates/build.html

@@ -1,14 +1,33 @@
 {% extends "base.html" %}
 
-
+{% load static %}
 {% load projecttags %}
 {% load humanize %}
 
 {% block pagecontent %}
 <div class="row-fluid">
+  {% if not objects.paginator.count and not request.GET.filter and not request.GET.search %}
+    <!-- Empty - no data in database -->
+    <div class="hero-unit span12">
+        <button type="button" class="close" data-dismiss="alert">&times;</button>
+        <div class="row-fluid">
+            <div class="span6">
+                <h1>This is Toaster</h1>
+                <p>A web interface to <a href="http://www.yoctoproject.org/tools-resources/projects/bitbake">BitBake</a>, the <a href="http://www.yoctoproject.org">Yocto Project</a> build system.</p>
+                <p class="hero-actions">
+                    <a class="btn btn-primary btn-large" href="https://www.yoctoproject.org/documentation/toaster-manual">Show me the manual</a>
+                    <a class="btn btn-large" href="https://wiki.yoctoproject.org/wiki/Contribute_to_Toaster">I want to contribute</a>
+                </p>
+            </div>
+            <div class="span5">
+                <a href="http://www.yoctoproject.org"><img src="{% static 'img/toaster.png' %}" class="thumbnail" alt="Yocto Project"/> </a>
+            </div>
+        </div>
+    </div>
+  {% endif %}
 
   {%if mru.count > 0%}
-  <div class="page-header" style="margin-top:40px;">
+  <div class="page-header top-air">
       <h1>
           Recent Builds
        </h1>
@@ -29,16 +48,16 @@
     {%if build.outcome == build.SUCCEEDED or build.outcome == build.FAILED %}
             <div class="span2 lead">
     {% if  build.errors_no %}
-                <i class="icon-minus-sign red"></i> <a href="{%url 'builddashboard' build.pk%}" class="error">{{build.errors_no}} error{{build.errors_no|pluralize}}</a>
+                <i class="icon-minus-sign red"></i> <a href="{%url 'builddashboard' build.pk%}#errors" class="error">{{build.errors_no}} error{{build.errors_no|pluralize}}</a>
     {% endif %}
             </div>
             <div class="span2 lead">
     {% if  build.warnings_no %}
-                <i class="icon-warning-sign yellow"></i> <a href="{%url 'builddashboard' build.pk%}" class="warning">{{build.warnings_no}} warning{{build.warnings_no|pluralize}}</a>
+                <i class="icon-warning-sign yellow"></i> <a href="{%url 'builddashboard' build.pk%}#warnings" class="warning">{{build.warnings_no}} warning{{build.warnings_no|pluralize}}</a>
     {% endif %}
             </div>
             <div class="lead pull-right">
-                Build time: <a href="build-time.html">{{ build.timespent|sectohms }}</a>
+                Build time: <a href="{% url 'buildtime' build.pk %}">{{ build.timespent|sectohms }}</a>
             </div>
     {%endif%}{%if build.outcome == build.IN_PROGRESS %}
             <div class="span4">
@@ -53,34 +72,43 @@
 
   {% endfor %}{%endif%}
 
-  <div class="page-header" style="margin-top:40px;">
+  {% if not objects.paginator.count and not request.GET.filter and not request.GET.search %}
+    <!-- Empty - no data in database -->
+    {% if mru.count == 0 %}
+    <div class="page-header top-air">
+       <h1>All builds</h1>
+    </div>
+    <div class="alert alert-info lead">
+        Toaster has not recorded any builds yet. Go build something with <a href="http://www.yoctoproject.org/docs/current/yocto-project-qs/yocto-project-qs.html#test-run">Knotty</a> or <a href="https://www.yoctoproject.org/documentation/hob-manual">Hob</a>
+    </div>
+    {% endif %}
+  {% else %}
+  <div class="page-header top-air">
      <h1>
-      {% if request.GET.filter or request.GET.search and objects.count > 0  %}
+      {% if request.GET.filter and objects.paginator.count > 0 or request.GET.search and objects.paginator.count > 0 %}
           {{objects.paginator.count}} build{{objects.paginator.count|pluralize}} found
-      {%elif objects.paginator.count == 0%}
-          No builds
+      {%elif request.GET.filter and objects.paginator.count == 0 or request.GET.search and objects.paginator.count == 0 %}
+          No builds found
       {%else%}
           All builds
       {%endif%}
      </h1>
   </div>
 
- {% if objects.paginator.count == 0 %}
-  <div class="row-fluid">
+  {% if objects.paginator.count == 0 %}
+    <div class="row-fluid">
       <div class="alert">
-      <form class="no-results" id="searchform">
-          <div class="input-append">
-              <input id="search" name="search" class="input-xxlarge" type="text" placeholder="{{request.GET.search}}" /><a href="javascript:$('#search').val('');searchform.submit()" class="add-on"><i class="icon-remove"></i></a>
-              <input class="btn" type="submit" value="Search"/>
-              <button class="btn btn-link" onclick="javascript:reload_params({'search':'', 'filter':''})">Show all builds</button>
-          </div>
-      </form>
+        <form class="no-results input-append" id="searchform">
+            <input id="search" name="search" class="input-xxlarge" type="text" value="{{request.GET.search}}"/>{% if request.GET.search %}<a href="javascript:$('#search').val('');searchform.submit()" class="add-on btn" tabindex="-1"><i class="icon-remove"></i></a>{% endif %}
+            <button class="btn" type="submit" value="Search">Search</button>
+            <button class="btn btn-link" onclick="javascript:$('#search').val('');searchform.submit()">Show all builds</button>
+        </form>
       </div>
-  </div>
+    </div>
 
 
-{% else %}
-{% include "basetable_top.html" %}
+  {% else %}
+  {% include "basetable_top.html" %}
         <!-- Table data rows; the order needs to match the order of "tablecols" definitions; and the <td class value needs to match the tablecols clclass value for show/hide buttons to work -->
         {% for build in objects %}
         <tr class="data">
@@ -89,20 +117,24 @@
             <td class="machine"><a href="{% url "builddashboard" build.id %}">{{build.machine}}</a></td>
             <td class="started_on"><a href="{% url "builddashboard" build.id %}">{{build.started_on|date:"d/m/y H:i"}}</a></td>
             <td class="completed_on"><a href="{% url "builddashboard" build.id %}">{{build.completed_on|date:"d/m/y H:i"}}</a></td>
-            <td class="failed_tasks error">{% query build.task_build outcome=4 order__gt=0 as exectask%}{% if exectask.count == 1 %}<a href="{% url "task" build.id exectask.0.id %}">{{exectask.0.recipe.name}}.{{exectask.0.task_name}}</a>{% elif exectask.count > 1%}<a href="{% url "tasks" build.id %}">{{exectask.count}}</a>{%endif%}</td>
+            <td class="failed_tasks error">{% query build.task_build outcome=4 order__gt=0 as exectask%}{% if exectask.count == 1 %}<a href="{% url "task" build.id exectask.0.id %}">{{exectask.0.recipe.name}}.{{exectask.0.task_name}}</a>{% elif exectask.count > 1%}<a href="{% url "tasks" build.id %}?filter=outcome%3A4">{{exectask.count}}</a>{%endif%}</td>
             <td class="errors_no">{% if  build.errors_no %}<a class="errors_no error" href="{% url "builddashboard" build.id %}#errors">{{build.errors_no}} error{{build.errors_no|pluralize}}</a>{%endif%}</td>
             <td class="warnings_no">{% if  build.warnings_no %}<a class="warnings_no warning" href="{% url "builddashboard" build.id %}#warnings">{{build.warnings_no}} warning{{build.warnings_no|pluralize}}</a>{%endif%}</td>
             <td class="time"><a href="{% url "buildtime" build.id %}">{{build.timespent|sectohms}}</a></td>
             <td class="log">{{build.cooker_log_path}}</td>
-            <td class="output">{% if build.outcome == 0 %}{% for t in build.target_set.all %}{% if t.is_image %}<a href="{%url "builddashboard" build.id%}#images">{{build.image_fstypes}}</a>{% endif %}{% endfor %}{% endif %}</td>
+            <td class="output">
+              {% if build.outcome == build.SUCCEEDED %}
+              <a href="{%url "builddashboard" build.id%}#images">{{fstypes|get_dict_value:build.id}}</a>
+              {% endif %}
+            </td>
         </tr>
 
         {% endfor %}
 
 
-{% include "basetable_bottom.html" %}
-
-{% endif %}
+  {% include "basetable_bottom.html" %}
+  {% endif %} {# objects.paginator.count #}
+{% endif %} {# empty #}
 </div><!-- end row-fluid-->
 
 {% endblock %}

bitbake/lib/toaster/toastergui/templates/builddashboard.html

@@ -1,15 +1,16 @@
 {% extends "basebuildpage.html" %}
 {% load humanize %}
 {% load projecttags %}
-{% block localbreadcrumb %}
-<li>Dashboard</li>
+
+{% block parentbreadcrumb %}
+{{build.get_sorted_target_list.0.target}} {%if build.target_set.all.count > 1%}(+ {{build.target_set.all.count|add:"-1"}}){%endif%} {{build.machine}} ({{build.completed_on|date:"d/m/y H:i"}})
 {% endblock %}
 
 {% block buildinfomain %}
 <!-- page title -->
 <div class="row-fluid span10">
  <div class="page-header">
-     <h1>{{build.target_set.all|join:" "}} {{build.machine}}</h1>
+     <h1>{{build.target_set.all|dictsort:"target"|join:", "}} {{build.machine}}</h1>
  </div>
 </div>
 
@@ -17,25 +18,113 @@
 <div class="row-fluid span10 pull-right">
   <div class="alert {%if build.outcome == build.SUCCEEDED%}alert-success{%elif build.outcome == build.FAILED%}alert-error{%else%}alert-info{%endif%}">
     <div class="row-fluid lead">
-            <span class="pull-left"><strong>{%if build.outcome == build.SUCCEEDED%}Completed{%elif build.outcome == build.FAILED%}Failed{%else%}{%endif%}</strong> {{build.completed_on|date:"d/m/y H:i"}} with </span>{%if build.outcome == build.SUCCEEDED or build.outcome == build.FAILED %}{% if  build.errors_no %}
-            <span class="span2"><i class="icon-minus-sign red"></i><strong><a href="{%url 'builddashboard' build.pk%}" class="error"> {{build.errors_no}} error{{build.errors_no|pluralize}}</a></strong></span>
+            <span class="pull-left"><strong>
+                {%if build.outcome == build.SUCCEEDED%}Completed{%elif build.outcome == build.FAILED%}Failed{%else%}{%endif%}
+              </strong> on
+            {{build.completed_on|date:"d/m/y H:i"}}
+</span>
+{% if  build.warnings_no or build.errors_no %}
+&nbsp;with
+{% endif %}
+{%if build.outcome == build.SUCCEEDED or build.outcome == build.FAILED %}
+{% if  build.errors_no %}
+     <span > <i class="icon-minus-sign red"></i><strong><a href="#errors" class="error show-errors"> {{build.errors_no}} error{{build.errors_no|pluralize}}</a></strong></span>
 {% endif %}
 {% if  build.warnings_no %}
-            <span class="span2"><i class="icon-warning-sign yellow"></i><strong><a href="{%url 'builddashboard' build.pk%}" class="warning"> {{build.warnings_no}} warning{{build.warnings_no|pluralize}}</a></strong></span>
+{% if  build.errors_no %}
+    and
 {% endif %}
-            <span class="pull-right">Build time: <a href="build-time.html">{{ build.timespent|sectohms }}</a></span>
+    <span > <i class="icon-warning-sign yellow"></i><strong><a href="#warnings" class="warning show-warnings"> {{build.warnings_no}} warning{{build.warnings_no|pluralize}}</a></strong></span>
+{% endif %}
+            <span class="pull-right">Build time: <a href="{% url 'buildtime' build.pk %}">{{ build.timespent|sectohms }}</a></span>
 {%endif%}
     </div>
   </div>
 </div>
 
+{% if build.errors_no %}
+<div class="accordion span10 pull-right" id="errors">
+  <div class="accordion-group">
+    <div class="accordion-heading">
+      <a class="accordion-toggle error toggle-errors">
+         <h2 id="error-toggle">
+           <i class="icon-minus-sign"></i>
+           {{build.errors_no}} error{{build.errors_no|pluralize}}
+         </h2>
+      </a>
+    </div>
+    <div class="accordion-body collapse in" id="collapse-errors">
+      <div class="accordion-inner">
+        <div class="span10">
+          {% for error in logmessages %}{% if error.level == 2 %}
+            <div class="alert alert-error">
+              <pre>{{error.message}}</pre>
+            </div>
+          {% endif %}{% endfor %}
+        </div>
+      </div>
+    </div>
+  </div>
+</div>
+{% endif %}
+
 {%if build.outcome == build.SUCCEEDED%}
 <!-- built images -->
 <div class="row-fluid span10 pull-right">
-  <h2>Images</h2>
+  {% if hasImages %}
+	<h2>Images</h2>
+	{% for target in targets %}
+        {% if target.target.is_image %}
+	<div class="well dashboard-section">
+		<h3><a href="{% url 'target' build.pk target.target.pk %}">{{target.target}}</a>
+                </h3>
+		<dl class="dl-horizontal">
+			<dt>Packages included</dt>
+			<dd><a href="{% url 'target' build.pk target.target.pk %}">{{target.npkg}}</a></dd>
+			<dt>Total package size</dt>
+			<dd>{{target.pkgsz|filtered_filesizeformat}}</dd>
+                        {% if target.targetHasNoImages %}
+				</dl>
+				<div class="row-fluid">
+					<div class="alert alert-info span7">
+                    <p>
+                                    <b>This build did not create any image files</b>
+                                  </p>
+                                  <p>
+                                    This is probably because valid image and license manifest
+                                    files from a previous build already exist in your
+                                    <code>.../poky/build/tmp/deploy</code>
+                                    directory. You can
+                                    also <a href="{% url 'targetpkg' build.pk target.target.pk %}">view the
+                                      license manifest information</a> in Toaster.
+                                  </p>
+                    </div>
+				</div>
+                        {% else %}
+			<dt>
+				<i class="icon-question-sign get-help" title="The location in disk of the license manifest, a document listing all packages installed in your image and their licenses"></i>
+				<a href="{% url 'targetpkg' build.pk target.target.pk %}">License manifest</a>
+			</dt>
+			<dd><code>{{target.target.license_manifest_path}}</code></dd>
+			<dt>
+				<i class="icon-question-sign get-help" title="Image files are stored in <code>/build/tmp/deploy/images/</code>"></i>
+				Image files
+			</dt>
+			<dd>
+				<ul>
+                                  {% for i in target.imageFiles %}
+					<li>{{i.path}}
+					({{i.size|filtered_filesizeformat}})</li>
+                                  {% endfor %}
+				</ul>
+			</dd>
+		</dl>
+                        {% endif %}
+	</div>
+        {% endif %}
+	{% endfor %}
 
-<div class="well" style="background-color:transparent;">
-</div>
+  {% endif %}
 </div>
 
 {%else%}
@@ -45,30 +134,85 @@
 <!-- build summary -->
 <div class="row-fluid span10 pull-right">
 <h2>Build summary</h2>
-    <div class="well span4" style="margin-left:0px; background-color:transparent;">
+    <div class="well span4 dashboard-section" style="margin-left:0px;">
         <h4><a href="{%url 'configuration' build.pk%}">Configuration</a></h4>
             <dl>
         <dt>Machine</dt><dd>{{build.machine}}</dd>
-        <dt>Distro</dt><dd></dd>
-        <dt>Layers</dt>{% for i in build.layer_version_build.all %}<dd>{{i.layer.name}}</dd>{%endfor%}
+        <dt>Distro</dt><dd>{{build.distro}}</dd>
+        <dt>Layers</dt>{% for i in build.layer_version_build.all|dictsort:"layer.name" %}<dd>{{i.layer.name}}</dd>{%endfor%}
             </dl>
     </div>
-    <div class="well span4" style="background-color:transparent;">
+    <div class="well span4 dashboard-section">
         <h4><a href="{%url 'tasks' build.pk%}">Tasks</a></h4>
             <dl>
-        <dt>Total number of tasks</dt><dd>{{build.task_build.all.count}}</dd>
-        <dt>Tasks executed</dt><dd>{% query build.task_build task_executed=1 order__gt=0 as exectask%}{{exectask.count}}</dd>
-        <dt>Tasks prebuilt</dt><dd>{% query build.task_build task_executed=0 order__gt=0 as noexectask%}{{noexectask.count}}</dd>
-        <dt>Reuse</dt><dd>{% query build.task_build order__gt=0 as texec %}{{noexectask.count|multiply:100|divide:texec.count}}%</dd>
+        <dt>Total number of tasks</dt><dd><a href="{% url 'tasks' build.pk %}">{% query build.task_build order__gt=0 as alltasks %}{{alltasks.count}}</a></dd>
+        <dt>
+            Tasks executed
+            <i class="icon-question-sign get-help" title="'Executed' tasks are those that need to be run in order to generate the task output"></i>
+        </dt>
+        <dd><a href="{% url 'tasks' build.pk %}?filter=task_executed%3A1&amp;count=25&amp;search=&amp;page=1&amp;orderby=order%3A%2B">{% query build.task_build task_executed=1 order__gt=0 as exectask%}{{exectask.count}}</a></dd>
+        <dt>
+            Tasks not executed
+            <i class="icon-question-sign get-help" title="'Not executed' tasks don't need to run because their outcome is provided by another task"></i>
+        </dt>           
+        <dd><a href="{% url 'tasks' build.pk %}?filter=task_executed%3A0&amp;count=25&amp;search=&amp;page=1&amp;orderby=order%3A%2B">{% query build.task_build task_executed=0 order__gt=0 as noexectask%}{{noexectask.count}}</a></dd>
+        <dt>
+            Reuse
+            <i class="icon-question-sign get-help" title="The percentage of 'not executed' tasks over the total number of tasks, which is a measure of the efficiency of your build"></i>
+        </dt>     
+        <dd>
+{% query build.task_build order__gt=0 as texec %}
+{% if noexectask.count|multiply:100|divide:texec.count < 0 %}
+0
+{% else %}
+{{noexectask.count|multiply:100|divide:texec.count}}
+{% endif %}
+%
+        </dd>
             </dl>
     </div>
-    <div class="well span4" style="background-color:transparent;">
+    <div class="well span4 dashboard-section">
         <h4><a href="{% url 'recipes' build.pk %}">Recipes</a> & <a href="{% url 'packages' build.pk %}">Packages</a></h4>
             <dl>
-        <dt>Recipes used</dt><dd>{{recipecount}}</dd>
-        <dt>Packages built</dt><dd>{{build.package_set.all.count}}</dd>
+        <dt>Recipes built</dt><dd><a href="{% url 'recipes' build.pk %}">{{recipecount}}</a></dd>
+        <dt>Packages built</dt><dd><a href="{% url 'packages' build.pk %}">{{packagecount}}</a></dd>
             </dl>
     </div>
 </div>
 
+{% if build.warnings_no %}
+<div class="accordion span10 pull-right" id="warnings">
+  <div class="accordion-group">
+    <div class="accordion-heading">
+      <a class="accordion-toggle warning toggle-warnings">
+        <h2 id="warning-toggle">
+          <i class="icon-warning-sign"></i>
+          {{build.warnings_no}} warning{{build.warnings_no|pluralize}}
+        </h2>
+      </a>
+    </div>
+    <div class="accordion-body collapse" id="collapse-warnings">
+      <div class="accordion-inner">
+        <div class="span10">
+          {% for warning in logmessages %}{% if warning.level == 1 %}
+            <div class="alert alert-warning">
+              <pre>{{warning.message}}</pre>
+            </div>
+          {% endif %}{% endfor %}
+        </div>
+      </div>
+    </div>
+  </div>
+</div>
+{% endif %}
+
+<script type="text/javascript">
+    $(document).ready(function() {
+        //show warnings section when requested from the previous page
+        if (location.href.search('#warnings') > -1) {
+            $('#collapse-warnings').addClass('in');
+        }
+    });
+</script>
+
 {% endblock %}

bitbake/lib/toaster/toastergui/templates/configuration.html

@@ -1,8 +1,14 @@
 {% extends "basebuildpage.html" %}
+{% load projecttags %}
+
 {% block localbreadcrumb %}
 <li>Configuration</li>
 {% endblock %}
 
+{% block nav-configuration %}
+  <li class="active"><a href="{% url 'configuration' build.pk %}">Configuration</a></li>
+{% endblock %}
+
 {% block buildinfomain %}
 <!-- page title -->
 <div class="row-fluid span10">
@@ -22,15 +28,19 @@
   <div id="summary" class="tab-pane active">
     <h3>Build configuration</h3>
     <dl class="dl-horizontal">
-      <dt>BitBake version</dt><dd>1.19.1</dd>
-      <dt>Build system</dt><dd>x86_64-linux</dd>
-      <dt>Host distribution</dt><dd>Ubuntu-12.04</dd>
-      <dt>Target system</dt><dd>i586-poky-linux</dd>
-      <dt><i class="icon-question-sign get-help" data-toggle="tooltip" title="Specifies the target device for which the image is built"></i> Machine</dt><dd>atom-pc</dd>
-      <dt><i class="icon-question-sign get-help" data-toggle="tooltip" title="The short name of the distribution"></i> Distro</dt><dd>poky</dd>
-      <dt>Distro version</dt><dd>1.4+snapshot-20130718</dd>
-      <dt>Tune features</dt><dd>m32 i586</dd>
-      <dt>Target(s)</dt><dd>core-image-sato</dd>
+      {%if BB_VERSION %}<dt>BitBake version</dt><dd>{{BB_VERSION}}</dd> {% endif %}
+      {%if BUILD_SYS %}<dt>Build system</dt><dd>{{BUILD_SYS}}</dd> {% endif %}
+      {%if NATIVELSBSTRING %}<dt>Host distribution</dt><dd>{{NATIVELSBSTRING}}</dd> {% endif %}
+      {%if TARGET_SYS %}<dt>Target system</dt><dd>{{TARGET_SYS}}</dd> {% endif %}
+      {%if MACHINE %}<dt>Machine</dt><dd>{{MACHINE}}</dd> {% endif %}
+      {%if DISTRO %}<dt>Distro</dt><dd>{{DISTRO}}</dd> {% endif %}
+      {%if DISTRO_VERSION %}<dt>Distro version</dt><dd>{{DISTRO_VERSION}}</dd> {% endif %}
+      {%if TUNE_FEATURES %}<dt>Tune features</dt><dd>{{TUNE_FEATURES}}</dd> {% endif %}
+      {%if TARGET_FPU %}<dt>Target FPU</dt><dd>{{TARGET_FPU}}</dd> {% endif %}
+      {%if targets.all %}<dt>Target(s)</dt>
+          <dd> <ul> {% for target in targets.all %}
+               <li>{{target.target}}{%if forloop.counter > 1 %}<br>{% endif %}</li>
+          {% endfor %} </ul> </dd> {% endif %}
     </dl>
     <h3>Layers</h3>
     <div class="span9" style="margin-left:0px;">
@@ -43,9 +53,15 @@
           <th>Layer directory</th>
         </tr>
       </thead>
-      <tbody>{% for lv in build.layer_version_build.all %}
+      <tbody>{% for lv in build.layer_version_build.all|dictsort:"layer.name" %}
         <tr>
-            <td>{{lv.layer.name}}<a href="{{lv.layer.layer_index_url}}" target="_blank">&nbsp;<i class="icon-share get-info"></i></a></td><td>{{lv.branch}}</td><td class="layer_commit"><a data-content="{{lv.commit}}" title="" href="#" class="btn" data-original-title="">{{lv.commit|slice:":8"}}...</a></td><td>{{lv.layer.local_path}}</td>
+            <td>{{lv.layer.name}}</td>
+            <td>{{lv.branch}}</td>
+            <td> <a class="btn" data-content="<ul class='unstyled'>
+                <li>{{lv.commit}}</li> </ul>">
+                    {{lv.commit|truncatechars:13}}
+                </a></td>
+            <td>{{lv.layer.local_path}}</td>
         </tr>{% endfor %}
       </tbody>
     </table>

bitbake/lib/toaster/toastergui/templates/configvars.html

@@ -1,40 +1,130 @@
 {% extends "basebuildpage.html" %}
+{% load projecttags %}
+
 {% block localbreadcrumb %}
 <li>Configuration</li>
 {% endblock %}
 
+{% block nav-configuration %}
+  <li class="active"><a href="{% url 'configuration' build.pk %}">Configuration</a></li>
+{% endblock %}
+
 {% block buildinfomain %}
 <!-- page title -->
 <div class="row-fluid span10">
  <div class="page-header">
-     <h1>Configuration</h1>
+ <h1>
+  {% if request.GET.filter and objects.paginator.count > 0 or request.GET.search and objects.paginator.count > 0 %}
+      {{objects.paginator.count}} variable{{objects.paginator.count|pluralize}} found
+  {%elif request.GET.filter and objects.paginator.count == 0 or request.GET.search and objects.paginator.count == 0 %}
+      No variables found
+  {%else%}
+      Configuration
+  {%endif%}
+ </h1>
  </div>
 </div>
 
 <!-- configuration table -->
 <div class="row-fluid pull-right span10" id="navTab">
-<ul class="nav nav-pills">
+  <ul class="nav nav-pills">
     <li class=""><a href="{% url 'configuration' build.id %}">Summary</a></li>
     <li class="active"><a href="#" >BitBake variables</a></li>
-</ul>
-
+  </ul>
 
   <!-- variables -->
   <div id="variables" class="tab-pane">
-{% include "basetable_top.html" %}
 
-{% for variable in objects %}
-   <tr class="data">
-        <td class="variable">{{variable.variable_name}}</td>
-        <td class="variable_value">{{variable.variable_value}}</td>
-        <td class="file">{% for vh in variable.vhistory_set.all %}{{vh.operation}} in {{vh.file_name}}:{{vh.line_number}}<br/>{%endfor%}</td>
-        <td class="description">{% if variable.description %}{{variable.description}}{% endif %}</td>
+  {% if objects.paginator.count == 0 %}
+  <div class="row-fluid">
+      <div class="alert">
+        <form class="no-results input-append" id="searchform">
+            <input id="search" name="search" class="input-xxlarge" type="text" value="{{request.GET.search}}"/>{% if request.GET.search %}<a href="javascript:$('#search').val('');searchform.submit()" class="add-on btn" tabindex="-1"><i class="icon-remove"></i></a>{% endif %}
+            <button class="btn" type="submit" value="Search">Search</button>
+            <button class="btn btn-link" onclick="javascript:$('#search').val('');searchform.submit()">Show all variables</button>
+        </form>
+      </div>
+  </div>
+
+  {% else %}
+  {% include "basetable_top.html" %}
+
+  {% for variable in objects %}
+    <tr class="data">
+        <td class="variable_name"><a data-toggle="modal" href="#variable-{{variable.pk}}">{{variable.variable_name}}</a></td>
+        <td class="variable_value"><a data-toggle="modal" href="#variable-{{variable.pk}}">{{variable.variable_value|truncatechars:153}}</a></td>
+        <td class="file"><a data-toggle="modal" href="#variable-{{variable.pk}}">
+            {% if variable.vhistory.all %} {% autoescape off %}
+                {{variable.vhistory.all | filter_setin_files:file_filter }}
+            {% endautoescape %} {% endif %}
+        </a></td>
+        <td class="description">
+            {% if variable.description %}
+                {{variable.description}}
+                <a href="http://www.yoctoproject.org/docs/current/ref-manual/ref-manual.html#var-{{variable.variable_name|variable_parent_name}}" target="_blank">
+                <i class="icon-share get-info"></i></a>
+            {% endif %}
+        </td>
     </tr>
 {% endfor %}
 
 {% include "basetable_bottom.html" %}
+{% endif %}
+</div> <!-- endvariables -->
 
-  </div> <!-- endvariables -->
+<!-- file list popups -->
+{% for variable in objects %}
+    {% if variable.vhistory.count %}
+    <div id="variable-{{variable.pk}}" class="modal hide fade" tabindex="-1" role="dialog">
+        <div class="modal-header">
+            <button type="button" class="close" data-dismiss="modal" aria-hidden="true">x</button>
+            <h3>History of {{variable.variable_name}}</h3>
+        </div>
+        <div class="modal-body">
+            {% if variable.variable_value %}
+              {% if variable.variable_value|length < 570 %}
+                <h4>{{variable.variable_name}} value is:</h4>
+                <p>
+                    {{variable.variable_value}}
+                </p>
+              {% else %}
+                <h4>{{variable.variable_name}} value is:</h4>
+                <p>
+                    <span>{{variable.variable_value|string_slice:':570'}}
+                        <span class="full"> {{variable.variable_value|string_slice:'570:'}}
+                        </span>
+                        <a class="btn btn-mini full-show">...</a>
+                    </span>
+                </p>
+                <a class="btn btn-mini full-hide">Collapse variable value <i class="icon-caret-up"></i>
+                </a>
+              {% endif %}
+            {% else %}
+                <div class="alert alert-info">The value of <strong>{{variable.variable_name}}</strong> is an empty string</div>
+            {% endif %}
+            <h4>The value was set in the following configuration files:</h4>
+            <table class="table table-bordered table-hover">
+                <thead>
+                    <tr>
+                        <th>Order</th>
+                        <th>Configuration file</th>
+                        <th>Operation</th>
+                        <th>Line number</th>
+                    </tr>
+                </thead>
+                <tbody>
+                    {% for vh in variable.vhistory.all %}
+                    <tr>
+                        <td>{{forloop.counter}}</td><td>{{vh.file_name}}</td><td>{{vh.operation}}</td><td>{{vh.line_number}}</td>
+                    </tr>
+                    {%endfor%}
+                </tbody>
+            </table>
+        </div>
+    </div>
+    {% endif %}
+{% endfor %}
+
+</div> <!-- buildinfomain -->
 
-</div>
 {% endblock %}