kernel-yocto: add CCACHE_DIR dependency to do_kernel_configme

[YOCTO #1350]

Since do_kernel_configme is added before the standard do_configure task
we needed to add CCACHE_DIR so when the kernel builds it's host configure
tools the CCACHE_DIR exists.

Signed-off-by: Saul Wold <sgw@linux.intel.com>

.gitignore

@@ -1,23 +1,22 @@
 *.pyc
 *.pyo
-/*.patch
-build*/
-pyshtables.py
+build*/conf/local.conf
+build*/conf/bblayers.conf
+build*/downloads
+build*/tmp/
+build*/sstate-cache
+build*/pyshtables.py
 pstage/
 scripts/oe-git-proxy-socks
 sources/
-meta-*/
-!meta-skeleton
-!meta-hob
-hob-image-*.bb
+meta-darwin
+meta-maemo
+meta-extras
+meta-m2
+meta-prvt*
 *.swp
 *.orig
 *.rej
 *~
-!meta-yocto
-!meta-yocto-bsp
-bitbake/doc/manual/html/
-bitbake/doc/manual/pdf/
-bitbake/doc/manual/txt/
-bitbake/doc/manual/xhtml/
-pull-*/
+
+

README

@@ -18,32 +18,8 @@ e.g. for the hardware support. Poky is in turn a component of the Yocto Project.
 
 The Yocto Project has extensive documentation about the system including a 
 reference manual which can be found at:
-    http://yoctoproject.org/documentation
+    http://yoctoproject.org/community/documentation
 
-OpenEmbedded-Core is a layer containing the core metadata for current versions
-of OpenEmbedded. It is distro-less (can build a functional image with
-DISTRO = "") and contains only emulated machine support.
-
-For information about OpenEmbedded, see the OpenEmbedded website:
+For information about OpenEmbedded see their website:
     http://www.openembedded.org/
 
-Where to Send Patches
-=====================
-
-As Poky is an integration repository, patches against the various components
-should be sent to their respective upstreams.
-
-bitbake:
-    bitbake-devel@lists.openembedded.org
-
-meta-yocto:
-    poky@yoctoproject.org
-
-Most everything else should be sent to the OpenEmbedded Core mailing list.  If
-in doubt, check the oe-core git repository for the content you intend to modify.
-Before sending, be sure the patches apply cleanly to the current oe-core git
-repository.
-    openembedded-core@lists.openembedded.org
-
-Note: The scripts directory should be treated with extra care as it is a mix
-      of oe-core and poky-specific files.

README.hardware

@@ -1,34 +1,28 @@
                           Poky Hardware README
                           ====================
 
-This file gives details about using Poky with the reference machines
-supported out of the box. A full list of supported reference target machines
-can be found by looking in the following directories:
-
-   meta/conf/machine/
-   meta-yocto-bsp/conf/machine/
-
-If you are in doubt about using Poky/OpenEmbedded with your hardware, consult
-the documentation for your board/device.
+This file gives details about using Poky with different hardware reference
+boards and consumer devices. A full list of target machines can be found by
+looking in the meta/conf/machine/ directory. If in doubt about using Poky with
+your hardware, consult the documentation for your board/device.
 
 Support for additional devices is normally added by creating BSP layers - for
 more information please see the Yocto Board Support Package (BSP) Developer's
 Guide - documentation source is in documentation/bspguide or download the PDF
 from:
 
-   http://yoctoproject.org/documentation
+   http://yoctoproject.org/community/documentation
 
-Support for physical reference hardware has now been split out into a
-meta-yocto-bsp layer which can be removed separately from other layers if not
-needed.
+Support for machines other than QEMU may be moved out to separate BSP layers in
+future versions.
 
 
 QEMU Emulation Targets
 ======================
 
-To simplify development, the build system supports building images to
-work with the QEMU emulator in system emulation mode. Several architectures
-are currently supported:
+To simplify development Poky supports building images to work with the QEMU
+emulator in system emulation mode. Several architectures are currently
+supported:
 
   * ARM (qemuarm)
   * x86 (qemux86)
@@ -36,33 +30,32 @@ are currently supported:
   * PowerPC (qemuppc)
   * MIPS (qemumips)
 
-Use of the QEMU images is covered in the Yocto Project Reference Manual.
-The appropriate MACHINE variable value corresponding to the target is given
-in brackets.
+Use of the QEMU images is covered in the Poky Reference Manual. The Poky
+MACHINE setting corresponding to the target is given in brackets.
 
 
 Hardware Reference Boards
 =========================
 
-The following boards are supported by the meta-yocto-bsp layer:
+The following boards are supported by Poky's core layer:
 
   * Texas Instruments Beagleboard (beagleboard)
   * Freescale MPC8315E-RDB (mpc8315e-rdb)
   * Ubiquiti Networks RouterStation Pro (routerstationpro)
 
-For more information see the board's section below. The appropriate MACHINE
-variable value corresponding to the board is given in brackets.
+For more information see the board's section below. The Poky MACHINE setting
+corresponding to the board is given in brackets.
 
 
 Consumer Devices
 ================
 
-The following consumer devices are supported by the meta-yocto-bsp layer:
+The following consumer devices are supported by Poky's core layer:
 
   * Intel Atom based PCs and devices (atom-pc)
 
-For more information see the device's section below. The appropriate MACHINE
-variable value corresponding to the device is given in brackets.
+For more information see the device's section below. The Poky MACHINE setting
+corresponding to the device is given in brackets.
 
 
 
@@ -75,37 +68,44 @@ Intel Atom based PCs and devices (atom-pc)
 
 The atom-pc MACHINE is tested on the following platforms:
 
-  o Asus EeePC 901
+  o Asus eee901
   o Acer Aspire One
   o Toshiba NB305
   o Intel Embedded Development Board 1-N450 (Black Sand)
 
-and is likely to work on many unlisted Atom based devices. The MACHINE type
+and is likely to work on many unlisted atom based devices. The MACHINE type
 supports ethernet, wifi, sound, and i915 graphics by default in addition to
 common PC input devices, busses, and so on.
 
 Depending on the device, it can boot from a traditional hard-disk, a USB device,
-or over the network. Writing generated images to physical media is
+or over the network. Writing poky generated images to physical media is
 straightforward with a caveat for USB devices. The following examples assume the
 target boot device is /dev/sdb, be sure to verify this and use the correct
 device as the following commands are run as root and are not reversable.
 
-USB Device:
-  1. Build a live image. This image type consists of a simple filesystem
-     without a partition table, which is suitable for USB keys, and with the
-     default setup for the atom-pc machine, this image type is built
-     automatically for any image you build. For example:
+Hard Disk:
+  1. Build a directdisk image format. This will generate proper partition tables
+     that will in turn be written to the physical media. For example:
 
-     $ bitbake core-image-minimal
+     $ bitbake core-image-minimal-directdisk
+  
+  2. Use the "dd" utility to write the image to the raw block device. For example:
+
+     # dd if=core-image-minimal-directdisk-atom-pc.hdddirect of=/dev/sdb
+
+USB Device:
+  1. Build an hddimg image format. This is a simple filesystem without partition
+     tables and is suitable for USB keys. For example:
+
+     $ bitbake core-image-minimal-live
 
   2. Use the "dd" utility to write the image to the raw block device. For
      example:
 
-     # dd if=core-image-minimal-atom-pc.hddimg of=/dev/sdb
+     # dd if=core-image-minimal-live-atom-pc.hddimg of=/dev/sdb
 
-  If the device fails to boot with "Boot error" displayed, or apparently
-  stops just after the SYSLINUX version banner, it is likely the BIOS cannot
-  understand the physical layout of the disk (or rather it expects a
+  If the device fails to boot with "Boot error" displayed, it is likely the BIOS
+  cannot understand the physical layout of the disk (or rather it expects a
   particular layout and cannot handle anything else). There are two possible
   solutions to this problem:
 
@@ -114,47 +114,26 @@ USB Device:
      geometry from the device.
 
   2. Without such an option, the BIOS generally boots the device in USB-ZIP
-     mode. To write an image to a USB device that will be bootable in
-     USB-ZIP mode, carry out the following actions:
+     mode.
 
-     a. Determine the geometry of your USB device using fdisk:
-
-     # fdisk /dev/sdb
-     Command (m for help): p
-
-     Disk /dev/sdb: 4011 MB, 4011491328 bytes
-     124 heads, 62 sectors/track, 1019 cylinders, total 7834944 sectors
-     ...
-
-     Command (m for help): q
-
-     b. Configure the USB device for USB-ZIP mode:
+     a. Configure the USB device for USB-ZIP mode:
      
-     # mkdiskimage -4 /dev/sdb 1019 124 62
+     # mkdiskimage -4 /dev/sdb 0 63 62
 
-     Where 1019, 124 and 62 are the cylinder, head and sectors/track counts
-     as reported by fdisk (substitute the values reported for your device).
-     When the operation has finished and the access LED (if any) on the
-     device stops flashing, remove and reinsert the device to allow the
-     kernel to detect the new partition layout.
+     Where 63 and 62 are the head and sector count as reported by fdisk.
+     Remove and reinsert the device to allow the kernel to detect the new
+     partition layout.
 
-     c. Copy the contents of the image to the USB-ZIP mode device:
+     b. Copy the contents of the poky image to the USB-ZIP mode device:
 
-     # mkdir /tmp/image
-     # mkdir /tmp/usbkey
-     # mount -o loop core-image-minimal-atom-pc.hddimg  /tmp/image
+     # mount -o loop core-image-minimal-live-atom-pc.hddimg  /tmp/image
      # mount /dev/sdb4 /tmp/usbkey
      # cp -rf /tmp/image/* /tmp/usbkey
 
-     d. Install the syslinux boot loader:
+     c. Install the syslinux boot loader:
 
      # syslinux /dev/sdb4
 
-     e. Unmount everything:
-
-     # umount /tmp/image
-     # umount /tmp/usbkey
-
   Install the boot device in the target board and configure the BIOS to boot
   from it.
 
@@ -171,7 +150,7 @@ faster CPU, more RAM, an ethernet port, more USB ports, microSD, and removes
 the NAND flash. The beagleboard MACHINE is tested on the following platforms:
 
   o Beagleboard C4
-  o Beagleboard xM rev A & B
+  o Beagleboard xM Rev A
 
 The Beagleboard C4 has NAND, while the xM does not. For the sake of simplicity,
 these instructions assume you have erased the NAND on the C4 so its boot
@@ -270,8 +249,8 @@ Setup instructions
 You will need the following:
 * NFS root setup on your workstation
 * TFTP server installed on your workstation
-* Straight-thru 9-conductor serial cable (DB9, M/F) connected from your 
-  PC to UART1
+* Null modem cable connected from your workstation to the first serial port
+  on the board
 * Ethernet connected to the first ethernet port on the board
 
 --- Preparation ---
@@ -288,8 +267,8 @@ anything here.
 Load the kernel and dtb (device tree blob), and boot the system as follows:
 
  1. Get the kernel (uImage-mpc8315e-rdb.bin) and dtb (uImage-mpc8315e-rdb.dtb)
-    files from the tmp/deploy directory, and make them available on your TFTP
-    server.
+    files from the Poky build tmp/deploy directory, and make them available on
+    your TFTP server.
 
  2. Connect the board's first serial port to your workstation and then start up
     your favourite serial terminal so that you will be able to interact with
@@ -308,9 +287,9 @@ Load the kernel and dtb (device tree blob), and boot the system as follows:
 
  5. Download the kernel and dtb, and boot:
 
- => tftp 1000000 uImage-mpc8315e-rdb.bin
- => tftp 2000000 uImage-mpc8315e-rdb.dtb
- => bootm 1000000 - 2000000
+ => tftp 800000 uImage-mpc8315e-rdb.bin
+ => tftp 780000 uImage-mpc8315e-rdb.dtb
+ => bootm 800000 - 780000
 
 
 Ubiquiti Networks RouterStation Pro (routerstationpro)

bitbake/bin/bitbake

@@ -40,17 +40,9 @@ from bb import cooker
 from bb import ui
 from bb import server
 
-__version__ = "1.18.0"
+__version__ = "1.13.3"
 logger = logging.getLogger("BitBake")
 
-# Unbuffer stdout to avoid log truncation in the event
-# of an unorderly exit as well as to provide timely
-# updates to log files for use with tail
-try:
-    if sys.stdout.name == '<stdout>':
-        sys.stdout = os.fdopen(sys.stdout.fileno(), 'w', 0)
-except:
-    pass
 
 class BBConfiguration(object):
     """
@@ -64,11 +56,10 @@ class BBConfiguration(object):
 
 
 def get_ui(config):
-    if not config.ui:
-        # modify 'ui' attribute because it is also read by cooker
-        config.ui = os.environ.get('BITBAKE_UI', 'knotty')
-
-    interface = config.ui
+    if config.ui:
+        interface = config.ui
+    else:
+        interface = 'knotty'
 
     try:
         # Dynamically load the UI based on the ui name. Although we
@@ -78,7 +69,7 @@ def get_ui(config):
         return getattr(module, interface).main
     except AttributeError:
         sys.exit("FATAL: Invalid user interface '%s' specified.\n"
-                 "Valid interfaces: depexp, goggle, ncurses, hob, knotty [default]." % interface)
+                 "Valid interfaces: depexp, goggle, ncurses, knotty [default]." % interface)
 
 
 # Display bitbake/OE warnings via the BitBake.Warnings logger, ignoring others"""
@@ -126,9 +117,6 @@ Default BBFILES are the .bb files in the current directory.""")
     parser.add_option("-c", "--cmd", help = "Specify task to execute. Note that this only executes the specified task for the providee and the packages it depends on, i.e. 'compile' does not implicitly call stage for the dependencies (IOW: use only if you know what you are doing). Depending on the base.bbclass a listtasks tasks is defined and will show available tasks",
                action = "store", dest = "cmd")
 
-    parser.add_option("-C", "--clear-stamp", help = "Invalidate the stamp for the specified cmd such as 'compile' and run the default task for the specified target(s)",
-                action = "store", dest = "invalidate_stamp")
-
     parser.add_option("-r", "--read", help = "read the specified file before bitbake.conf",
                action = "append", dest = "prefile", default = [])
 
@@ -150,13 +138,13 @@ Default BBFILES are the .bb files in the current directory.""")
     parser.add_option("-p", "--parse-only", help = "quit after parsing the BB files (developers only)",
                action = "store_true", dest = "parse_only", default = False)
 
-    parser.add_option("-s", "--show-versions", help = "show current and preferred versions of all recipes",
+    parser.add_option("-s", "--show-versions", help = "show current and preferred versions of all packages",
                action = "store_true", dest = "show_versions", default = False)
 
     parser.add_option("-e", "--environment", help = "show the global or per-package environment (this is what used to be bbread)",
                action = "store_true", dest = "show_environment", default = False)
 
-    parser.add_option("-g", "--graphviz", help = "emit the dependency trees of the specified packages in the dot syntax, and the pn-buildlist to show the build list",
+    parser.add_option("-g", "--graphviz", help = "emit the dependency trees of the specified packages in the dot syntax",
                 action = "store_true", dest = "dot_graph", default = False)
 
     parser.add_option("-I", "--ignore-deps", help = """Assume these dependencies don't exist and are already provided (equivalent to ASSUME_PROVIDED). Useful to make dependency graphs more appealing""",
@@ -177,13 +165,6 @@ Default BBFILES are the .bb files in the current directory.""")
     parser.add_option("", "--revisions-changed", help = "Set the exit code depending on whether upstream floating revisions have changed or not",
                action = "store_true", dest = "revisions_changed", default = False)
 
-    parser.add_option("", "--server-only", help = "Run bitbake without UI,  the frontend can connect with bitbake server itself",
-               action = "store_true", dest = "server_only", default = False)
-
-    parser.add_option("-B", "--bind", help = "The name/address for the bitbake server to bind to",
-               action = "store", dest = "bind", default = False)
-    parser.add_option("", "--no-setscene", help = "Do not run any setscene tasks, forces builds",
-               action = "store_true", dest = "nosetscene", default = False)
     options, args = parser.parse_args(sys.argv)
 
     configuration = BBConfiguration(options)
@@ -205,21 +186,11 @@ Default BBFILES are the .bb files in the current directory.""")
         sys.exit("FATAL: Invalid server type '%s' specified.\n"
                  "Valid interfaces: xmlrpc, process [default], none." % servertype)
 
-    if configuration.server_only:
-        if configuration.servertype != "xmlrpc":
-            sys.exit("FATAL: If '--server-only' is defined, we must set the servertype as 'xmlrpc'.\n")
-        if not configuration.bind:
-            sys.exit("FATAL: The '--server-only' option requires a name/address to bind to with the -B option.\n")
+    # Save a logfile for cooker into the current working directory. When the
+    # server is daemonized this logfile will be truncated.
+    cooker_logfile = os.path.join(os.getcwd(), "cooker.log")
 
-    if configuration.bind and configuration.servertype != "xmlrpc":
-        sys.exit("FATAL: If '-B' or '--bind' is defined, we must set the servertype as 'xmlrpc'.\n")
-
-    if "BBDEBUG" in os.environ:
-        level = int(os.environ["BBDEBUG"])
-        if level > configuration.debug:
-            configuration.debug = level
-
-    bb.msg.init_msgconfig(configuration.verbose, configuration.debug,
+    bb.utils.init_logger(bb.msg, configuration.verbose, configuration.debug,
                          configuration.debug_domains)
 
     # Ensure logging messages get sent to the UI as events
@@ -229,15 +200,14 @@ Default BBFILES are the .bb files in the current directory.""")
     # Before we start modifying the environment we should take a pristine
     # copy for possible later use
     initialenv = os.environ.copy()
-    # Clear away any spurious environment variables while we stoke up the cooker
-    cleanedvars = bb.utils.clean_environment()
+    # Clear away any spurious environment variables. But don't wipe the
+    # environment totally. This is necessary to ensure the correct operation
+    # of the UIs (e.g. for DISPLAY, etc.)
+    bb.utils.clean_environment()
 
     server = server.BitBakeServer()
-    if configuration.bind:
-        server.initServer((configuration.bind, 0))
-    else:
-        server.initServer()
 
+    server.initServer()
     idle = server.getServerIdleCB()
 
     cooker = bb.cooker.BBCooker(configuration, idle, initialenv)
@@ -245,28 +215,20 @@ Default BBFILES are the .bb files in the current directory.""")
 
     server.addcooker(cooker)
     server.saveConnectionDetails()
-    server.detach()
+    server.detach(cooker_logfile)
 
     # Should no longer need to ever reference cooker
     del cooker
 
     logger.removeHandler(handler)
 
-    if not configuration.server_only:
-        # Setup a connection to the server (cooker)
-        server_connection = server.establishConnection()
+    # Setup a connection to the server (cooker)
+    server_connection = server.establishConnection()
 
-        # Restore the environment in case the UI needs it
-        for k in cleanedvars:
-            os.environ[k] = cleanedvars[k]
-
-        try:
-            return server.launchUI(ui_main, server_connection.connection, server_connection.events)
-        finally:
-            bb.event.ui_queue = []
-            server_connection.terminate()
-    else:
-        print("server address: %s, server port: %s" % (server.serverinfo.host, server.serverinfo.port))
+    try:
+        return server.launchUI(ui_main, server_connection.connection, server_connection.events)
+    finally:
+        server_connection.terminate()
 
     return 1
 

bitbake/bin/bitbake-diffsigs

@@ -1,102 +1,12 @@
 #!/usr/bin/env python
-
-# bitbake-diffsigs
-# BitBake task signature data comparison utility
-#
-# Copyright (C) 2012 Intel Corporation
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
 import os
 import sys
 import warnings
-import fnmatch
-import optparse
-import logging
-
 sys.path.insert(0, os.path.join(os.path.dirname(os.path.dirname(sys.argv[0])), 'lib'))
 
-import bb.tinfoil
 import bb.siggen
 
-logger = logging.getLogger('BitBake')
-
-def find_compare_task(bbhandler, pn, taskname):
-    """ Find the most recent signature files for the specified PN/task and compare them """
-
-    if not hasattr(bb.siggen, 'find_siginfo'):
-        logger.error('Metadata does not support finding signature data files')
-        sys.exit(1)
-
-    filedates = bb.siggen.find_siginfo(pn, taskname, None, bbhandler.config_data)
-    latestfiles = sorted(filedates.keys(), key=lambda f: filedates[f])[-2:]
-    if not latestfiles:
-        logger.error('No sigdata files found matching %s %s' % (pn, taskname))
-        sys.exit(1)
-    elif len(latestfiles) < 2:
-        logger.error('Only one matching sigdata file found for the specified task (%s %s)' % (pn, taskname))
-        sys.exit(1)
-    else:
-        # Define recursion callback
-        def recursecb(key, hash1, hash2):
-            hashes = [hash1, hash2]
-            hashfiles = bb.siggen.find_siginfo(key, None, hashes, bbhandler.config_data)
-
-            recout = []
-            if len(hashfiles) == 2:
-                out2 = bb.siggen.compare_sigfiles(hashfiles[hash1], hashfiles[hash2], recursecb)
-                recout.extend(list('  ' + l for l in out2))
-            else:
-                recout.append("Unable to find matching sigdata for %s with hashes %s or %s" % (key, hash1, hash2))
-
-            return recout
-
-        # Recurse into signature comparison
-        output = bb.siggen.compare_sigfiles(latestfiles[0], latestfiles[1], recursecb)
-        if output:
-            print '\n'.join(output)
-    sys.exit(0)
-
-
-
-parser = optparse.OptionParser(
-    usage = """
-  %prog -t recipename taskname
-  %prog sigdatafile1 sigdatafile2
-  %prog sigdatafile1""")
-
-parser.add_option("-t", "--task",
-        help = "find the signature data files for last two runs of the specified task and compare them",
-        action="store_true", dest="taskmode")
-
-options, args = parser.parse_args(sys.argv)
-
-if len(args) == 1:
-    parser.print_help()
+if len(sys.argv) > 2:
+    bb.siggen.compare_sigfiles(sys.argv[1], sys.argv[2])
 else:
-    if options.taskmode:
-        tinfoil = bb.tinfoil.Tinfoil()
-        if len(args) < 3:
-            logger.error("Please specify a recipe and task name")
-            sys.exit(1)
-        tinfoil.prepare(config_only = True)
-        find_compare_task(tinfoil, args[1], args[2])
-    else:
-        if len(args) == 2:
-            output = bb.siggen.dump_sigfile(sys.argv[1])
-        else:
-            output = bb.siggen.compare_sigfiles(sys.argv[1], sys.argv[2])
-
-        if output:
-            print '\n'.join(output)
+    bb.siggen.dump_sigfile(sys.argv[1])

bitbake/bin/bitbake-dumpsig

@@ -1,11 +0,0 @@
-#!/usr/bin/env python
-import os
-import sys
-import warnings
-sys.path.insert(0, os.path.join(os.path.dirname(os.path.dirname(sys.argv[0])), 'lib'))
-
-import bb.siggen
-
-output = bb.siggen.dump_sigfile(sys.argv[1])
-if output:
-    print '\n'.join(output)

bitbake/bin/bitbake-layers

@@ -2,31 +2,14 @@
 
 # This script has subcommands which operate against your bitbake layers, either
 # displaying useful information, or acting against them.
-# See the help output for details on available commands.
-
-# Copyright (C) 2011 Mentor Graphics Corporation
-# Copyright (C) 2012 Intel Corporation
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+# Currently, it only provides a show_appends command, which shows you what
+# bbappends are in effect, and warns you if you have appends which are not being
+# utilized.
 
 import cmd
 import logging
 import os
 import sys
-import fnmatch
-from collections import defaultdict
-import re
 
 bindir = os.path.dirname(__file__)
 topdir = os.path.dirname(bindir)
@@ -36,277 +19,92 @@ import bb.cache
 import bb.cooker
 import bb.providers
 import bb.utils
-import bb.tinfoil
+from bb.cooker import state
 
 
 logger = logging.getLogger('BitBake')
+default_cmd = 'show_appends'
 
 
 def main(args):
+    logging.basicConfig(format='%(levelname)s: %(message)s')
+    bb.utils.clean_environment()
+
     cmds = Commands()
     if args:
-        # Allow user to specify e.g. show-layers instead of show_layers
-        args = [args[0].replace('-', '_')] + args[1:]
         cmds.onecmd(' '.join(args))
     else:
-        cmds.do_help('')
+        cmds.onecmd(default_cmd)
     return cmds.returncode
 
 
 class Commands(cmd.Cmd):
     def __init__(self):
         cmd.Cmd.__init__(self)
-        self.bbhandler = bb.tinfoil.Tinfoil()
+        initialenv = os.environ.copy()
         self.returncode = 0
-        self.bblayers = (self.bbhandler.config_data.getVar('BBLAYERS', True) or "").split()
+        self.config = Config(parse_only=True)
+        self.cooker = bb.cooker.BBCooker(self.config,
+                                         self.register_idle_function,
+                                         initialenv)
+        self.config_data = self.cooker.configuration.data
+        bb.providers.logger.setLevel(logging.ERROR)
+        self.cooker_data = None
 
-    def default(self, line):
-        """Handle unrecognised commands"""
-        sys.stderr.write("Unrecognised command or option\n")
-        self.do_help('')
+    def register_idle_function(self, function, data):
+        pass
 
-    def do_help(self, topic):
-        """display general help or help on a specified command"""
-        if topic:
-            sys.stdout.write('%s: ' % topic)
-            cmd.Cmd.do_help(self, topic.replace('-', '_'))
-        else:
-            sys.stdout.write("usage: bitbake-layers <command> [arguments]\n\n")
-            sys.stdout.write("Available commands:\n")
-            procnames = list(set(self.get_names()))
-            for procname in procnames:
-                if procname[:3] == 'do_':
-                    sys.stdout.write("  %s\n" % procname[3:].replace('_', '-'))
-                    doc = getattr(self, procname).__doc__
-                    if doc:
-                        sys.stdout.write("    %s\n" % doc.splitlines()[0])
+    def prepare_cooker(self):
+        sys.stderr.write("Parsing recipes..")
+        logger.setLevel(logging.WARNING)
+
+        try:
+            while self.cooker.state in (state.initial, state.parsing):
+                self.cooker.updateCache()
+        except KeyboardInterrupt:
+            self.cooker.shutdown()
+            self.cooker.updateCache()
+            sys.exit(2)
+
+        logger.setLevel(logging.INFO)
+        sys.stderr.write("done.\n")
+
+        self.cooker_data = self.cooker.status
+        self.cooker_data.appends = self.cooker.appendlist
+
+    def check_prepare_cooker(self):
+        if not self.cooker_data:
+            self.prepare_cooker()
 
     def do_show_layers(self, args):
-        """show current configured layers"""
-        self.bbhandler.prepare(config_only = True)
-        logger.plain("%s  %s  %s" % ("layer".ljust(20), "path".ljust(40), "priority"))
-        logger.plain('=' * 74)
-        for layerdir in self.bblayers:
-            layername = self.get_layer_name(layerdir)
-            layerpri = 0
-            for layer, _, regex, pri in self.bbhandler.cooker.status.bbfile_config_priorities:
-                if regex.match(os.path.join(layerdir, 'test')):
-                    layerpri = pri
-                    break
-
-            logger.plain("%s  %s  %d" % (layername.ljust(20), layerdir.ljust(40), layerpri))
-
-
-    def version_str(self, pe, pv, pr = None):
-        verstr = "%s" % pv
-        if pr:
-            verstr = "%s-%s" % (verstr, pr)
-        if pe:
-            verstr = "%s:%s" % (pe, verstr)
-        return verstr
-
+        """show_layers: shows current configured layers"""
+        self.check_prepare_cooker()
+        logger.info(str(self.config_data.getVar('BBLAYERS', True)))
 
     def do_show_overlayed(self, args):
-        """list overlayed recipes (where the same recipe exists in another layer)
+        """show_overlayed: list overlayed recipes (where there is a recipe in another
+layer that has a higher layer priority)
 
-usage: show-overlayed [-f] [-s]
+syntax: show_overlayed
 
-Lists the names of overlayed recipes and the available versions in each
-layer, with the preferred version first. Note that skipped recipes that
-are overlayed will also be listed, with a " (skipped)" suffix.
-
-Options:
-  -f   instead of the default formatting, list filenames of higher priority
-       recipes with the ones they overlay indented underneath
-  -s   only list overlayed recipes where the version is the same
+Highest priority recipes are listed with the recipes they overlay as subitems.
 """
-        self.bbhandler.prepare()
-
-        show_filenames = False
-        show_same_ver_only = False
-        for arg in args.split():
-            if arg == '-f':
-                show_filenames = True
-            elif arg == '-s':
-                show_same_ver_only = True
-            else:
-                sys.stderr.write("show-overlayed: invalid option %s\n" % arg)
-                self.do_help('')
-                return
-
-        items_listed = self.list_recipes('Overlayed recipes', None, True, show_same_ver_only, show_filenames, True)
-
-        # Check for overlayed .bbclass files
-        classes = defaultdict(list)
-        for layerdir in self.bblayers:
-            classdir = os.path.join(layerdir, 'classes')
-            if os.path.exists(classdir):
-                for classfile in os.listdir(classdir):
-                    if os.path.splitext(classfile)[1] == '.bbclass':
-                        classes[classfile].append(classdir)
-
-        # Locating classes and other files is a bit more complicated than recipes -
-        # layer priority is not a factor; instead BitBake uses the first matching
-        # file in BBPATH, which is manipulated directly by each layer's
-        # conf/layer.conf in turn, thus the order of layers in bblayers.conf is a
-        # factor - however, each layer.conf is free to either prepend or append to
-        # BBPATH (or indeed do crazy stuff with it). Thus the order in BBPATH might
-        # not be exactly the order present in bblayers.conf either.
-        bbpath = str(self.bbhandler.config_data.getVar('BBPATH', True))
-        overlayed_class_found = False
-        for (classfile, classdirs) in classes.items():
-            if len(classdirs) > 1:
-                if not overlayed_class_found:
-                    logger.plain('=== Overlayed classes ===')
-                    overlayed_class_found = True
-
-                mainfile = bb.utils.which(bbpath, os.path.join('classes', classfile))
-                if show_filenames:
-                    logger.plain('%s' % mainfile)
-                else:
-                    # We effectively have to guess the layer here
-                    logger.plain('%s:' % classfile)
-                    mainlayername = '?'
-                    for layerdir in self.bblayers:
-                        classdir = os.path.join(layerdir, 'classes')
-                        if mainfile.startswith(classdir):
-                            mainlayername = self.get_layer_name(layerdir)
-                    logger.plain('  %s' % mainlayername)
-                for classdir in classdirs:
-                    fullpath = os.path.join(classdir, classfile)
-                    if fullpath != mainfile:
-                        if show_filenames:
-                            print('  %s' % fullpath)
-                        else:
-                            print('  %s' % self.get_layer_name(os.path.dirname(classdir)))
-
-        if overlayed_class_found:
-            items_listed = True;
-
-        if not items_listed:
-            logger.plain('No overlayed files found.')
-
-
-    def do_show_recipes(self, args):
-        """list available recipes, showing the layer they are provided by
-
-usage: show-recipes [-f] [-m] [pnspec]
-
-Lists the names of overlayed recipes and the available versions in each
-layer, with the preferred version first. Optionally you may specify
-pnspec to match a specified recipe name (supports wildcards). Note that
-skipped recipes will also be listed, with a " (skipped)" suffix.
-
-Options:
-  -f   instead of the default formatting, list filenames of higher priority
-       recipes with other available recipes indented underneath
-  -m   only list where multiple recipes (in the same layer or different
-       layers) exist for the same recipe name
-"""
-        self.bbhandler.prepare()
-
-        show_filenames = False
-        show_multi_provider_only = False
-        pnspec = None
-        title = 'Available recipes:'
-        for arg in args.split():
-            if arg == '-f':
-                show_filenames = True
-            elif arg == '-m':
-                show_multi_provider_only = True
-            elif not arg.startswith('-'):
-                pnspec = arg
-                title = 'Available recipes matching %s:' % pnspec
-            else:
-                sys.stderr.write("show-recipes: invalid option %s\n" % arg)
-                self.do_help('')
-                return
-        self.list_recipes(title, pnspec, False, False, show_filenames, show_multi_provider_only)
-
-
-    def list_recipes(self, title, pnspec, show_overlayed_only, show_same_ver_only, show_filenames, show_multi_provider_only):
-        pkg_pn = self.bbhandler.cooker.status.pkg_pn
-        (latest_versions, preferred_versions) = bb.providers.findProviders(self.bbhandler.cooker.configuration.data, self.bbhandler.cooker.status, pkg_pn)
-        allproviders = bb.providers.allProviders(self.bbhandler.cooker.status)
-
-        # Ensure we list skipped recipes
-        # We are largely guessing about PN, PV and the preferred version here,
-        # but we have no choice since skipped recipes are not fully parsed
-        skiplist = self.bbhandler.cooker.skiplist.keys()
-        skiplist.sort( key=lambda fileitem: self.bbhandler.cooker.calc_bbfile_priority(fileitem) )
-        skiplist.reverse()
-        for fn in skiplist:
-            recipe_parts = os.path.splitext(os.path.basename(fn))[0].split('_')
-            p = recipe_parts[0]
-            if len(recipe_parts) > 1:
-                ver = (None, recipe_parts[1], None)
-            else:
-                ver = (None, 'unknown', None)
-            allproviders[p].append((ver, fn))
-            if not p in pkg_pn:
-                pkg_pn[p] = 'dummy'
-                preferred_versions[p] = (ver, fn)
-
-        def print_item(f, pn, ver, layer, ispref):
-            if f in skiplist:
-                skipped = ' (skipped)'
-            else:
-                skipped = ''
-            if show_filenames:
-                if ispref:
-                    logger.plain("%s%s", f, skipped)
-                else:
-                    logger.plain("  %s%s", f, skipped)
-            else:
-                if ispref:
-                    logger.plain("%s:", pn)
-                logger.plain("  %s %s%s", layer.ljust(20), ver, skipped)
-
-        preffiles = []
-        items_listed = False
-        for p in sorted(pkg_pn):
-            if pnspec:
-                if not fnmatch.fnmatch(p, pnspec):
-                    continue
-
-            if len(allproviders[p]) > 1 or not show_multi_provider_only:
-                pref = preferred_versions[p]
-                preffile = bb.cache.Cache.virtualfn2realfn(pref[1])[0]
-                if preffile not in preffiles:
-                    preflayer = self.get_file_layer(preffile)
-                    multilayer = False
-                    same_ver = True
-                    provs = []
-                    for prov in allproviders[p]:
-                        provfile = bb.cache.Cache.virtualfn2realfn(prov[1])[0]
-                        provlayer = self.get_file_layer(provfile)
-                        provs.append((provfile, provlayer, prov[0]))
-                        if provlayer != preflayer:
-                            multilayer = True
-                        if prov[0] != pref[0]:
-                            same_ver = False
-
-                    if (multilayer or not show_overlayed_only) and (same_ver or not show_same_ver_only):
-                        if not items_listed:
-                            logger.plain('=== %s ===' % title)
-                            items_listed = True
-                        print_item(preffile, p, self.version_str(pref[0][0], pref[0][1]), preflayer, True)
-                        for (provfile, provlayer, provver) in provs:
-                            if provfile != preffile:
-                                print_item(provfile, p, self.version_str(provver[0], provver[1]), provlayer, False)
-                        # Ensure we don't show two entries for BBCLASSEXTENDed recipes
-                        preffiles.append(preffile)
-
-        return items_listed
-
+        self.check_prepare_cooker()
+        if self.cooker.overlayed:
+            logger.info('Overlayed recipes:')
+            for f in self.cooker.overlayed.iterkeys():
+                logger.info('%s' % f)
+                for of in self.cooker.overlayed[f]:
+                    logger.info('  %s' % of)
+        else:
+            logger.info('No overlayed recipes found')
 
     def do_flatten(self, args):
-        """flattens layer configuration into a separate output directory.
+        """flatten: flattens layer configuration into a separate output directory.
 
-usage: flatten [layer1 layer2 [layer3]...] <outputdir>
+syntax: flatten <outputdir>
 
-Takes the specified layers (or all layers in the current layer
-configuration if none are specified) and builds a "flattened" directory
+Takes the current layer configuration and builds a "flattened" directory
 containing the contents of all layers, with any overlayed recipes removed
 and bbappends appended to the corresponding recipes. Note that some manual
 cleanup may still be necessary afterwards, in particular:
@@ -314,197 +112,83 @@ cleanup may still be necessary afterwards, in particular:
 * where non-recipe files (such as patches) are overwritten (the flatten
   command will show a warning for these)
 * where anything beyond the normal layer setup has been added to
-  layer.conf (only the lowest priority number layer's layer.conf is used)
+  layer.conf (only the lowest priority layer's layer.conf is used)
 * overridden/appended items from bbappends will need to be tidied up
-* when the flattened layers do not have the same directory structure (the
-  flatten command should show a warning when this will cause a problem)
-
-Warning: if you flatten several layers where another layer is intended to
-be used "inbetween" them (in layer priority order) such that recipes /
-bbappends in the layers interact, and then attempt to use the new output
-layer together with that other layer, you may no longer get the same
-build results (as the layer priority order has effectively changed).
 """
         arglist = args.split()
-        if len(arglist) < 1:
+        if len(arglist) != 1:
             logger.error('Please specify an output directory')
             self.do_help('flatten')
             return
 
-        if len(arglist) == 2:
-            logger.error('If you specify layers to flatten you must specify at least two')
-            self.do_help('flatten')
+        if os.path.exists(arglist[0]) and os.listdir(arglist[0]):
+            logger.error('Directory %s exists and is non-empty, please clear it out first' % arglist[0])
             return
 
-        outputdir = arglist[-1]
-        if os.path.exists(outputdir) and os.listdir(outputdir):
-            logger.error('Directory %s exists and is non-empty, please clear it out first' % outputdir)
-            return
-
-        self.bbhandler.prepare()
-        layers = self.bblayers
-        if len(arglist) > 2:
-            layernames = arglist[:-1]
-            found_layernames = []
-            found_layerdirs = []
-            for layerdir in layers:
-                layername = self.get_layer_name(layerdir)
-                if layername in layernames:
-                    found_layerdirs.append(layerdir)
-                    found_layernames.append(layername)
-
-            for layername in layernames:
-                if not layername in found_layernames:
-                    logger.error('Unable to find layer %s in current configuration, please run "%s show-layers" to list configured layers' % (layername, os.path.basename(sys.argv[0])))
-                    return
-            layers = found_layerdirs
-        else:
-            layernames = []
-
-        # Ensure a specified path matches our list of layers
-        def layer_path_match(path):
-            for layerdir in layers:
-                if path.startswith(os.path.join(layerdir, '')):
-                    return layerdir
-            return None
-
-        appended_recipes = []
+        self.check_prepare_cooker()
+        layers = (self.config_data.getVar('BBLAYERS', True) or "").split()
         for layer in layers:
             overlayed = []
-            for f in self.bbhandler.cooker.overlayed.iterkeys():
-                for of in self.bbhandler.cooker.overlayed[f]:
+            for f in self.cooker.overlayed.iterkeys():
+                for of in self.cooker.overlayed[f]:
                     if of.startswith(layer):
                         overlayed.append(of)
 
-            logger.plain('Copying files from %s...' % layer )
+            logger.info('Copying files from %s...' % layer )
             for root, dirs, files in os.walk(layer):
                 for f1 in files:
                     f1full = os.sep.join([root, f1])
                     if f1full in overlayed:
-                        logger.plain('  Skipping overlayed file %s' % f1full )
+                        logger.info('  Skipping overlayed file %s' % f1full )
                     else:
                         ext = os.path.splitext(f1)[1]
                         if ext != '.bbappend':
                             fdest = f1full[len(layer):]
-                            fdest = os.path.normpath(os.sep.join([outputdir,fdest]))
+                            fdest = os.path.normpath(os.sep.join([arglist[0],fdest]))
                             bb.utils.mkdirhier(os.path.dirname(fdest))
                             if os.path.exists(fdest):
                                 if f1 == 'layer.conf' and root.endswith('/conf'):
-                                    logger.plain('  Skipping layer config file %s' % f1full )
+                                    logger.info('  Skipping layer config file %s' % f1full )
                                     continue
                                 else:
                                     logger.warn('Overwriting file %s', fdest)
                             bb.utils.copyfile(f1full, fdest)
                             if ext == '.bb':
-                                if f1 in self.bbhandler.cooker.appendlist:
-                                    appends = self.bbhandler.cooker.appendlist[f1]
+                                if f1 in self.cooker_data.appends:
+                                    appends = self.cooker_data.appends[f1]
                                     if appends:
-                                        logger.plain('  Applying appends to %s' % fdest )
+                                        logger.info('  Applying appends to %s' % fdest )
                                         for appendname in appends:
-                                            if layer_path_match(appendname):
-                                                self.apply_append(appendname, fdest)
-                                    appended_recipes.append(f1)
+                                            self.apply_append(appendname, fdest)
 
-        # Take care of when some layers are excluded and yet we have included bbappends for those recipes
-        for recipename in self.bbhandler.cooker.appendlist.iterkeys():
-            if recipename not in appended_recipes:
-                appends = self.bbhandler.cooker.appendlist[recipename]
-                first_append = None
-                for appendname in appends:
-                    layer = layer_path_match(appendname)
-                    if layer:
-                        if first_append:
-                            self.apply_append(appendname, first_append)
-                        else:
-                            fdest = appendname[len(layer):]
-                            fdest = os.path.normpath(os.sep.join([outputdir,fdest]))
-                            bb.utils.mkdirhier(os.path.dirname(fdest))
-                            bb.utils.copyfile(appendname, fdest)
-                            first_append = fdest
-
-        # Get the regex for the first layer in our list (which is where the conf/layer.conf file will
-        # have come from)
-        first_regex = None
-        layerdir = layers[0]
-        for layername, pattern, regex, _ in self.bbhandler.cooker.status.bbfile_config_priorities:
-            if regex.match(os.path.join(layerdir, 'test')):
-                first_regex = regex
-                break
-
-        if first_regex:
-            # Find the BBFILES entries that match (which will have come from this conf/layer.conf file)
-            bbfiles = str(self.bbhandler.config_data.getVar('BBFILES', True)).split()
-            bbfiles_layer = []
-            for item in bbfiles:
-                if first_regex.match(item):
-                    newpath = os.path.join(outputdir, item[len(layerdir)+1:])
-                    bbfiles_layer.append(newpath)
-
-            if bbfiles_layer:
-                # Check that all important layer files match BBFILES
-                for root, dirs, files in os.walk(outputdir):
-                    for f1 in files:
-                        ext = os.path.splitext(f1)[1]
-                        if ext in ['.bb', '.bbappend']:
-                            f1full = os.sep.join([root, f1])
-                            entry_found = False
-                            for item in bbfiles_layer:
-                                if fnmatch.fnmatch(f1full, item):
-                                    entry_found = True
-                                    break
-                            if not entry_found:
-                                logger.warning("File %s does not match the flattened layer's BBFILES setting, you may need to edit conf/layer.conf or move the file elsewhere" % f1full)
-
-    def get_file_layer(self, filename):
-        for layer, _, regex, _ in self.bbhandler.cooker.status.bbfile_config_priorities:
-            if regex.match(filename):
-                for layerdir in self.bblayers:
-                    if regex.match(os.path.join(layerdir, 'test')) and re.match(layerdir, filename):
-                        return self.get_layer_name(layerdir)
+    def get_append_layer(self, appendname):
+        for layer, _, regex, _ in self.cooker.status.bbfile_config_priorities:
+            if regex.match(appendname):
+                return layer
         return "?"
 
-    def get_file_layerdir(self, filename):
-        for layer, _, regex, _ in self.bbhandler.cooker.status.bbfile_config_priorities:
-            if regex.match(filename):
-                for layerdir in self.bblayers:
-                    if regex.match(os.path.join(layerdir, 'test')) and re.match(layerdir, filename):
-                        return layerdir
-        return "?"
-
-    def remove_layer_prefix(self, f):
-        """Remove the layer_dir prefix, e.g., f = /path/to/layer_dir/foo/blah, the
-           return value will be: layer_dir/foo/blah"""
-        f_layerdir = self.get_file_layerdir(f)
-        prefix = os.path.join(os.path.dirname(f_layerdir), '')
-        return f[len(prefix):] if f.startswith(prefix) else f
-
-    def get_layer_name(self, layerdir):
-        return os.path.basename(layerdir.rstrip(os.sep))
-
     def apply_append(self, appendname, recipename):
         appendfile = open(appendname, 'r')
         recipefile = open(recipename, 'a')
         recipefile.write('\n')
-        recipefile.write('##### bbappended from %s #####\n' % self.get_file_layer(appendname))
+        recipefile.write('##### bbappended from %s #####\n' % self.get_append_layer(appendname))
         recipefile.writelines(appendfile.readlines())
-        recipefile.close()
-        appendfile.close()
 
     def do_show_appends(self, args):
-        """list bbappend files and recipe files they apply to
+        """show_appends: List bbappend files and recipe files they apply to
 
-usage: show-appends
+syntax: show_appends
 
 Recipes are listed with the bbappends that apply to them as subitems.
 """
-        self.bbhandler.prepare()
-        if not self.bbhandler.cooker.appendlist:
-            logger.plain('No append files found')
+        self.check_prepare_cooker()
+        if not self.cooker_data.appends:
+            logger.info('No append files found')
             return
 
-        logger.plain('=== Appended recipes ===')
+        logger.info('State of append files:')
 
-        pnlist = list(self.bbhandler.cooker_data.pkg_pn.keys())
+        pnlist = list(self.cooker_data.pkg_pn.keys())
         pnlist.sort()
         for pn in pnlist:
             self.show_appends_for_pn(pn)
@@ -512,28 +196,28 @@ Recipes are listed with the bbappends that apply to them as subitems.
         self.show_appends_for_skipped()
 
     def show_appends_for_pn(self, pn):
-        filenames = self.bbhandler.cooker_data.pkg_pn[pn]
+        filenames = self.cooker_data.pkg_pn[pn]
 
         best = bb.providers.findBestProvider(pn,
-                                             self.bbhandler.cooker.configuration.data,
-                                             self.bbhandler.cooker_data,
-                                             self.bbhandler.cooker_data.pkg_pn)
+                                             self.cooker.configuration.data,
+                                             self.cooker_data,
+                                             self.cooker_data.pkg_pn)
         best_filename = os.path.basename(best[3])
 
         self.show_appends_output(filenames, best_filename)
 
     def show_appends_for_skipped(self):
         filenames = [os.path.basename(f)
-                    for f in self.bbhandler.cooker.skiplist.iterkeys()]
+                    for f in self.cooker.skiplist.iterkeys()]
         self.show_appends_output(filenames, None, " (skipped)")
 
     def show_appends_output(self, filenames, best_filename, name_suffix = ''):
         appended, missing = self.get_appends_for_files(filenames)
         if appended:
             for basename, appends in appended:
-                logger.plain('%s%s:', basename, name_suffix)
+                logger.info('%s%s:', basename, name_suffix)
                 for append in appends:
-                    logger.plain('  %s', append)
+                    logger.info('  %s', append)
 
             if best_filename:
                 if best_filename in missing:
@@ -550,171 +234,30 @@ Recipes are listed with the bbappends that apply to them as subitems.
                 continue
 
             basename = os.path.basename(filename)
-            appends = self.bbhandler.cooker.appendlist.get(basename)
+            appends = self.cooker_data.appends.get(basename)
             if appends:
                 appended.append((basename, list(appends)))
             else:
                 notappended.append(basename)
         return appended, notappended
 
-    def do_show_cross_depends(self, args):
-        """figure out the dependency between recipes that crosses a layer boundary.
 
-usage: show-cross-depends [-f]
+class Config(object):
+    def __init__(self, **options):
+        self.pkgs_to_build = []
+        self.debug_domains = []
+        self.extra_assume_provided = []
+        self.prefile = []
+        self.postfile = []
+        self.debug = 0
+        self.__dict__.update(options)
 
-Figure out the dependency between recipes that crosses a layer boundary.
+    def __getattr__(self, attribute):
+        try:
+            return super(Config, self).__getattribute__(attribute)
+        except AttributeError:
+            return None
 
-Options:
-  -f   show full file path
-
-NOTE:
-The .bbappend file can impact the dependency.
-"""
-        self.bbhandler.prepare()
-
-        show_filenames = False
-        for arg in args.split():
-            if arg == '-f':
-                show_filenames = True
-            else:
-                sys.stderr.write("show-cross-depends: invalid option %s\n" % arg)
-                self.do_help('')
-                return
-
-        pkg_fn = self.bbhandler.cooker_data.pkg_fn
-        bbpath = str(self.bbhandler.config_data.getVar('BBPATH', True))
-        self.require_re = re.compile(r"require\s+(.+)")
-        self.include_re = re.compile(r"include\s+(.+)")
-        self.inherit_re = re.compile(r"inherit\s+(.+)")
-
-        # The bb's DEPENDS and RDEPENDS
-        for f in pkg_fn:
-            f = bb.cache.Cache.virtualfn2realfn(f)[0]
-            # Get the layername that the file is in
-            layername = self.get_file_layer(f)
-
-            # The DEPENDS
-            deps = self.bbhandler.cooker_data.deps[f]
-            for pn in deps:
-                if pn in self.bbhandler.cooker_data.pkg_pn:
-                    best = bb.providers.findBestProvider(pn,
-                            self.bbhandler.cooker.configuration.data,
-                            self.bbhandler.cooker_data,
-                            self.bbhandler.cooker_data.pkg_pn)
-                    self.check_cross_depends("DEPENDS", layername, f, best[3], show_filenames)
-
-            # The RDPENDS
-            all_rdeps = self.bbhandler.cooker_data.rundeps[f].values()
-            # Remove the duplicated or null one.
-            sorted_rdeps = {}
-            # The all_rdeps is the list in list, so we need two for loops
-            for k1 in all_rdeps:
-                for k2 in k1:
-                    sorted_rdeps[k2] = 1
-            all_rdeps = sorted_rdeps.keys()
-            for rdep in all_rdeps:
-                all_p = bb.providers.getRuntimeProviders(self.bbhandler.cooker_data, rdep)
-                if all_p:
-                    best = bb.providers.filterProvidersRunTime(all_p, rdep,
-                                    self.bbhandler.cooker.configuration.data,
-                                    self.bbhandler.cooker_data)[0][0]
-                    self.check_cross_depends("RDEPENDS", layername, f, best, show_filenames)
-
-            # The inherit class
-            cls_re = re.compile('classes/')
-            if f in self.bbhandler.cooker_data.inherits:
-                inherits = self.bbhandler.cooker_data.inherits[f]
-                for cls in inherits:
-                    # The inherits' format is [classes/cls, /path/to/classes/cls]
-                    # ignore the classes/cls.
-                    if not cls_re.match(cls):
-                        inherit_layername = self.get_file_layer(cls)
-                        if inherit_layername != layername:
-                            if not show_filenames:
-                                f_short = self.remove_layer_prefix(f)
-                                cls = self.remove_layer_prefix(cls)
-                            else:
-                                f_short = f
-                            logger.plain("%s inherits %s" % (f_short, cls))
-
-            # The 'require/include xxx' in the bb file
-            pv_re = re.compile(r"\${PV}")
-            fnfile = open(f, 'r')
-            line = fnfile.readline()
-            while line:
-                m, keyword = self.match_require_include(line)
-                # Found the 'require/include xxxx'
-                if m:
-                    needed_file = m.group(1)
-                    # Replace the ${PV} with the real PV
-                    if pv_re.search(needed_file) and f in self.bbhandler.cooker_data.pkg_pepvpr:
-                        pv = self.bbhandler.cooker_data.pkg_pepvpr[f][1]
-                        needed_file = re.sub(r"\${PV}", pv, needed_file)
-                    self.print_cross_files(bbpath, keyword, layername, f, needed_file, show_filenames)
-                line = fnfile.readline()
-            fnfile.close()
-
-        # The "require/include xxx" in conf/machine/*.conf, .inc and .bbclass
-        conf_re = re.compile(".*/conf/machine/[^\/]*\.conf$")
-        inc_re = re.compile(".*\.inc$")
-        # The "inherit xxx" in .bbclass
-        bbclass_re = re.compile(".*\.bbclass$")
-        for layerdir in self.bblayers:
-            layername = self.get_layer_name(layerdir)
-            for dirpath, dirnames, filenames in os.walk(layerdir):
-                for name in filenames:
-                    f = os.path.join(dirpath, name)
-                    s = conf_re.match(f) or inc_re.match(f) or bbclass_re.match(f)
-                    if s:
-                        ffile = open(f, 'r')
-                        line = ffile.readline()
-                        while line:
-                            m, keyword = self.match_require_include(line)
-                            # Only bbclass has the "inherit xxx" here.
-                            bbclass=""
-                            if not m and f.endswith(".bbclass"):
-                                m, keyword = self.match_inherit(line)
-                                bbclass=".bbclass"
-                            # Find a 'require/include xxxx'
-                            if m:
-                                self.print_cross_files(bbpath, keyword, layername, f, m.group(1) + bbclass, show_filenames)
-                            line = ffile.readline()
-                        ffile.close()
-
-    def print_cross_files(self, bbpath, keyword, layername, f, needed_filename, show_filenames):
-        """Print the depends that crosses a layer boundary"""
-        needed_file = bb.utils.which(bbpath, needed_filename)
-        if needed_file:
-            # Which layer is this file from
-            needed_layername = self.get_file_layer(needed_file)
-            if needed_layername != layername:
-                if not show_filenames:
-                    f = self.remove_layer_prefix(f)
-                    needed_file = self.remove_layer_prefix(needed_file)
-                logger.plain("%s %s %s" %(f, keyword, needed_file))
-    def match_inherit(self, line):
-        """Match the inherit xxx line"""
-        return (self.inherit_re.match(line), "inherits")
-
-    def match_require_include(self, line):
-        """Match the require/include xxx line"""
-        m = self.require_re.match(line)
-        keyword = "requires"
-        if not m:
-            m = self.include_re.match(line)
-            keyword = "includes"
-        return (m, keyword)
-
-    def check_cross_depends(self, keyword, layername, f, needed_file, show_filenames):
-        """Print the DEPENDS/RDEPENDS file that crosses a layer boundary"""
-        best_realfn = bb.cache.Cache.virtualfn2realfn(needed_file)[0]
-        needed_layername = self.get_file_layer(best_realfn)
-        if needed_layername != layername:
-            if not show_filenames:
-                f = self.remove_layer_prefix(f)
-                best_realfn = self.remove_layer_prefix(best_realfn)
-
-            logger.plain("%s %s %s" % (f, keyword, best_realfn))
 
 if __name__ == '__main__':
     sys.exit(main(sys.argv[1:]) or 0)

bitbake/bin/bitbake-prserv

@@ -10,39 +10,37 @@ import prserv.serv
 
 __version__="1.0.0"
 
-PRHOST_DEFAULT='0.0.0.0'
+PRHOST_DEFAULT=''
 PRPORT_DEFAULT=8585
 
 def main():
     parser = optparse.OptionParser(
         version="Bitbake PR Service Core version %s, %%prog version %s" % (prserv.__version__, __version__),
-        usage = "%prog < --start | --stop > [options]")
+        usage = "%prog [options]")
 
-    parser.add_option("-f", "--file", help="database filename(default: prserv.sqlite3)", action="store",
-                      dest="dbfile", type="string", default="prserv.sqlite3")
-    parser.add_option("-l", "--log", help="log filename(default: prserv.log)", action="store",
+    parser.add_option("-f", "--file", help="database filename(default prserv.db)", action="store",
+                      dest="dbfile", type="string", default="prserv.db")
+    parser.add_option("-l", "--log", help="log filename(default prserv.log)", action="store",
                       dest="logfile", type="string", default="prserv.log")
     parser.add_option("--loglevel", help="logging level, i.e. CRITICAL, ERROR, WARNING, INFO, DEBUG",
-                      action = "store", type="string", dest="loglevel", default = "INFO")
+                      action = "store", type="string", dest="loglevel", default = "WARNING")
     parser.add_option("--start", help="start daemon",
-                      action="store_true", dest="start")
+                      action="store_true", dest="start", default="True")
     parser.add_option("--stop", help="stop daemon",
-                      action="store_true", dest="stop")
+                      action="store_false", dest="start")
     parser.add_option("--host", help="ip address to bind", action="store",
                       dest="host", type="string", default=PRHOST_DEFAULT)
-    parser.add_option("--port", help="port number(default: 8585)", action="store",
+    parser.add_option("--port", help="port number(default 8585)", action="store",
                       dest="port", type="int", default=PRPORT_DEFAULT)
 
     options, args = parser.parse_args(sys.argv)
+
     prserv.init_logger(os.path.abspath(options.logfile),options.loglevel)
 
     if options.start:
-        ret=prserv.serv.start_daemon(options.dbfile, options.host, options.port,os.path.abspath(options.logfile))
-    elif options.stop:
-        ret=prserv.serv.stop_daemon(options.host, options.port)
+        prserv.serv.start_daemon(options)
     else:
-        ret=parser.print_help()
-    return ret
+        prserv.serv.stop_daemon()
 
 if __name__ == "__main__":
     try:

bitbake/bin/bitbake-runtask

@@ -4,10 +4,6 @@ import os
 import sys
 import warnings
 sys.path.insert(0, os.path.join(os.path.dirname(os.path.dirname(sys.argv[0])), 'lib'))
-from bb import fetch2
-import logging
-
-logger = logging.getLogger("BitBake")
 
 try:
     import cPickle as pickle
@@ -20,20 +16,13 @@ class BBConfiguration(object):
     Manages build options and configurations for one run
     """
 
-    def __init__(self, **options):
-        self.data = {}
-        self.file = []
-        self.cmd = None
-        self.dump_signatures = True
-        self.prefile = []
-        self.postfile = []
-        self.parse_only = True
-
-    def __getattr__(self, attribute):
-        try:
-            return super(BBConfiguration, self).__getattribute__(attribute)
-        except AttributeError:
-            return None
+    def __init__(self, debug, debug_domains):
+        setattr(self, "data", {})
+        setattr(self, "file", [])
+        setattr(self, "cmd", None)
+        setattr(self, "dump_signatures", True)
+        setattr(self, "debug", debug)
+        setattr(self, "debug_domains", debug_domains)
 
 _warnings_showwarning = warnings.showwarning
 def _showwarning(message, category, filename, lineno, file=None, line=None):
@@ -50,70 +39,82 @@ warnings.showwarning = _showwarning
 warnings.simplefilter("ignore", DeprecationWarning)
 
 import bb.event
+
+# Need to map our I/O correctly. stdout is a pipe to the server expecting 
+# events. We save this and then map stdout to stderr.
+
+eventfd = os.dup(sys.stdout.fileno())
+bb.event.worker_pipe = os.fdopen(eventfd, 'w', 0)
+
+# map stdout to stderr
+os.dup2(sys.stderr.fileno(), sys.stdout.fileno())
+
+# Replace those fds with our own
+#logout = data.expand("${TMPDIR}/log/stdout.%s" % os.getpid(), self.cfgData, True)
+#mkdirhier(os.path.dirname(logout))
+#newso = open("/tmp/stdout.%s" % os.getpid(), 'w')
+#os.dup2(newso.fileno(), sys.stdout.fileno())
+#os.dup2(newso.fileno(), sys.stderr.fileno())
+
+# Don't read from stdin from the parent
+si = file("/dev/null", 'r')
+os.dup2(si.fileno( ), sys.stdin.fileno( ))
+
+# We don't want to see signals to our parent, e.g. Ctrl+C
+os.setpgrp()
+
+# Save out the PID so that the event can include it the
+# events
+bb.event.worker_pid = os.getpid()
+bb.event.useStdout = False
+
+hashfile = sys.argv[1]
+buildfile = sys.argv[2]
+taskname = sys.argv[3]
+
 import bb.cooker
 
-buildfile = sys.argv[1]
-taskname = sys.argv[2]
-if len(sys.argv) >= 4:
-    dryrun = sys.argv[3]    
-else:
-    dryrun = False
-if len(sys.argv) >= 5:
-    hashfile = sys.argv[4]
-    p = pickle.Unpickler(file(hashfile, "rb"))
-    hashdata = p.load()
-else:
-    hashdata = None
+p = pickle.Unpickler(file(hashfile, "rb"))
+hashdata = p.load()
 
-handler = bb.event.LogHandler()
-logger.addHandler(handler)
+debug = hashdata["msg-debug"]
+debug_domains = hashdata["msg-debug-domains"]
+verbose = hashdata["verbose"]
 
-#An example to make debug log messages show up
-#bb.msg.init_msgconfig(True, 3, [])
+bb.utils.init_logger(bb.msg, verbose, debug, debug_domains)
 
-console = logging.StreamHandler(sys.stdout)
-format = bb.msg.BBLogFormatter("%(levelname)s: %(message)s")
-bb.msg.addDefaultlogFilter(console)
-console.setFormatter(format)
+cooker = bb.cooker.BBCooker(BBConfiguration(debug, debug_domains), None)
+cooker.parseConfiguration()
 
-def worker_fire(event, d):
-    if isinstance(event, logging.LogRecord):
-        console.handle(event)
-bb.event.worker_fire = worker_fire
-bb.event.worker_pid = os.getpid()
+cooker.bb_cache = bb.cache.init(cooker)
+cooker.status = bb.cache.CacheData()
 
-initialenv = os.environ.copy()
-config = BBConfiguration()
-
-def register_idle_function(self, function, data):
-    pass
-
-cooker = bb.cooker.BBCooker(config, register_idle_function, initialenv)
-config_data = cooker.configuration.data
-cooker.status = config_data
-cooker.handleCollections(config_data.getVar("BBFILE_COLLECTIONS", 1))
-
-fn, cls = bb.cache.Cache.virtualfn2realfn(buildfile)
+(fn, cls) = cooker.bb_cache.virtualfn2realfn(buildfile)
 buildfile = cooker.matchFile(fn)
-fn = bb.cache.Cache.realfn2virtual(buildfile, cls)
+fn = cooker.bb_cache.realfn2virtual(buildfile, cls)
 
 cooker.buildSetVars()
 
 # Load data into the cache for fn and parse the loaded cache data
-the_data = bb.cache.Cache.loadDataFull(fn, cooker.get_file_appends(fn), cooker.configuration.data)
+the_data = cooker.bb_cache.loadDataFull(fn, cooker.get_file_appends(fn), cooker.configuration.data)
+cooker.bb_cache.setData(fn, buildfile, the_data)
+cooker.bb_cache.handle_data(fn, cooker.status)
+
+#exportlist = bb.utils.preserved_envvars_export_list()
+#bb.utils.filter_environment(exportlist)
 
 if taskname.endswith("_setscene"):
     the_data.setVarFlag(taskname, "quieterrors", "1")
 
-if hashdata:
-    bb.parse.siggen.set_taskdata(hashdata["hashes"], hashdata["deps"])
-    for h in hashdata["hashes"]:
-        the_data.setVar("BBHASH_%s" % h, hashdata["hashes"][h])
-    for h in hashdata["deps"]:
-        the_data.setVar("BBHASHDEPS_%s" % h, hashdata["deps"][h])
+bb.parse.siggen.set_taskdata(hashdata["hashes"], hashdata["deps"])
+
+for h in hashdata["hashes"]:
+    bb.data.setVar("BBHASH_%s" % h, hashdata["hashes"][h], the_data)
+for h in hashdata["deps"]:
+    bb.data.setVar("BBHASHDEPS_%s" % h, hashdata["deps"][h], the_data)
 
 ret = 0
-if dryrun != "True":
+if sys.argv[4] != "True":
     ret = bb.build.exec_task(fn, taskname, the_data)
 sys.exit(ret)
 

bitbake/bin/bitbake-selftest

@@ -1,38 +0,0 @@
-#!/usr/bin/env python
-#
-# Copyright (C) 2012 Richard Purdie
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-import os
-import sys, logging
-sys.path.insert(0, os.path.join(os.path.dirname(os.path.dirname(__file__)), 'lib'))
-
-import unittest
-try:
-    import bb
-except RuntimeError as exc:
-    sys.exit(str(exc))
-
-tests = ["bb.tests.codeparser", 
-         "bb.tests.cow",
-         "bb.tests.data",
-         "bb.tests.fetch",
-         "bb.tests.utils"]
-
-for t in tests:
-    __import__(t)
-
-unittest.main(argv=["bitbake-selftest"] + tests)
-

bitbake/bin/bitdoc

@@ -430,8 +430,9 @@ Create a set of html pages (documentation) for a bitbake.conf....
                        action = "store_true", dest = "verbose", default = False )
 
     options, args = parser.parse_args( sys.argv )
- 
-    bb.msg.init_msgconfig(options.verbose, options.debug)
+
+    if options.debug:
+        bb.msg.set_debug_level(options.debug)
 
     return options.config, options.output
 
@@ -462,7 +463,7 @@ def main():
     state_group = 2
 
     for key in bb.data.keys(documentation):
-        data   = documentation.getVarFlag(key, "doc")
+        data   = bb.data.getVarFlag(key, "doc", documentation)
         if not data:
             continue
 

bitbake/bin/image-writer

@@ -1,122 +0,0 @@
-#!/usr/bin/env python
-
-# Copyright (c) 2012 Wind River Systems, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-import os
-import sys
-sys.path.insert(0, os.path.join(os.path.dirname(os.path.dirname( \
-                                    os.path.abspath(__file__))), 'lib'))
-try:
-    import bb
-except RuntimeError as exc:
-    sys.exit(str(exc))
-
-import gtk
-import optparse
-import pygtk
-
-from bb.ui.crumbs.hobwidget import HobAltButton, HobButton
-from bb.ui.crumbs.hig.crumbsmessagedialog import CrumbsMessageDialog
-from bb.ui.crumbs.hig.deployimagedialog import DeployImageDialog
-from bb.ui.crumbs.hig.imageselectiondialog import ImageSelectionDialog
-
-# I put all the fs bitbake supported here. Need more test.
-DEPLOYABLE_IMAGE_TYPES = ["jffs2", "cramfs", "ext2", "ext3", "btrfs", "squashfs", "ubi", "vmdk"]
-Title = "USB Image Writer"
-
-class DeployWindow(gtk.Window):
-    def __init__(self, image_path=''):
-        super(DeployWindow, self).__init__()
-
-        if len(image_path) > 0:
-            valid = True
-            if not os.path.exists(image_path):
-                valid = False
-                lbl = "<b>Invalid image file path: %s.</b>\nPress <b>Select Image</b> to select an image." % image_path
-            else:
-                image_path = os.path.abspath(image_path)
-                extend_name = os.path.splitext(image_path)[1][1:]
-                if extend_name not in DEPLOYABLE_IMAGE_TYPES:
-                    valid = False
-                    lbl = "<b>Undeployable imge type: %s</b>\nPress <b>Select Image</b> to select an image." % extend_name
-
-            if not valid:
-                image_path = ''
-                crumbs_dialog = CrumbsMessageDialog(self, lbl, gtk.STOCK_DIALOG_INFO)
-                button = crumbs_dialog.add_button("Close", gtk.RESPONSE_OK)
-                HobButton.style_button(button)
-                crumbs_dialog.run()
-                crumbs_dialog.destroy()
-
-        self.deploy_dialog = DeployImageDialog(Title, image_path, self,
-                                        gtk.DIALOG_MODAL | gtk.DIALOG_DESTROY_WITH_PARENT
-                                        | gtk.DIALOG_NO_SEPARATOR, None, standalone=True)
-        close_button = self.deploy_dialog.add_button("Close", gtk.RESPONSE_NO)
-        HobAltButton.style_button(close_button)
-        close_button.connect('clicked', gtk.main_quit)
-
-        write_button = self.deploy_dialog.add_button("Write USB image", gtk.RESPONSE_YES)
-        HobAltButton.style_button(write_button)
-
-        self.deploy_dialog.connect('select_image_clicked', self.select_image_clicked_cb)
-        self.deploy_dialog.connect('destroy', gtk.main_quit)
-        response = self.deploy_dialog.show()
-
-    def select_image_clicked_cb(self, dialog):
-        cwd = os.getcwd()
-        dialog = ImageSelectionDialog(cwd, DEPLOYABLE_IMAGE_TYPES, Title, self, gtk.FILE_CHOOSER_ACTION_SAVE )
-        button = dialog.add_button("Cancel", gtk.RESPONSE_NO)
-        HobAltButton.style_button(button)
-        button = dialog.add_button("Open", gtk.RESPONSE_YES)
-        HobAltButton.style_button(button)
-        response = dialog.run()
-
-        if response == gtk.RESPONSE_YES:
-            if not dialog.image_names:
-                lbl = "<b>No selections made</b>\nClicked the radio button to select a image."
-                crumbs_dialog = CrumbsMessageDialog(self, lbl, gtk.STOCK_DIALOG_INFO)
-                button = crumbs_dialog.add_button("Close", gtk.RESPONSE_OK)
-                HobButton.style_button(button)
-                crumbs_dialog.run()
-                crumbs_dialog.destroy()
-                dialog.destroy()
-                return
-
-            # get the full path of image
-            image_path = os.path.join(dialog.image_folder, dialog.image_names[0])
-            self.deploy_dialog.set_image_text_buffer(image_path)
-            self.deploy_dialog.set_image_path(image_path)
-
-        dialog.destroy()
-
-def main():
-    parser = optparse.OptionParser(
-                usage = """%prog [-h] [image_file]
-
-%prog writes bootable images to USB devices. You can
-provide the image file on the command line or select it using the GUI.""")
-
-    options, args = parser.parse_args(sys.argv)
-    image_file = args[1] if len(args) > 1 else ''
-    dw = DeployWindow(image_file)
-
-if __name__ == '__main__':
-    try:
-        main()
-        gtk.main()
-    except Exception:
-        import traceback
-        traceback.print_exc(3)

bitbake/contrib/dump_cache.py

@@ -1,68 +0,0 @@
-#!/usr/bin/env python
-# ex:ts=4:sw=4:sts=4:et
-# -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*-
-#
-# Copyright (C) 2012 Wind River Systems, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-#
-# This is used for dumping the bb_cache.dat, the output format is:
-# recipe_path PN PV PACKAGES
-#
-import os
-import sys
-import warnings
-
-# For importing bb.cache
-sys.path.insert(0, os.path.join(os.path.abspath(os.path.dirname(sys.argv[0])), '../lib'))
-from bb.cache import CoreRecipeInfo
-
-import cPickle as pickle
-
-def main(argv=None):
-    """
-    Get the mapping for the target recipe.
-    """
-    if len(argv) != 1:
-        print >>sys.stderr, "Error, need one argument!"
-        return 2
-
-    cachefile = argv[0]
-
-    with open(cachefile, "rb") as cachefile:
-        pickled = pickle.Unpickler(cachefile)
-        while cachefile:
-            try:
-                key = pickled.load()
-                val = pickled.load()
-            except Exception:
-                break
-            if isinstance(val, CoreRecipeInfo) and (not val.skipped):
-                pn = val.pn
-                # Filter out the native recipes.
-                if key.startswith('virtual:native:') or pn.endswith("-native"):
-                    continue
-
-                # 1.0 is the default version for a no PV recipe.
-                if val.__dict__.has_key("pv"):
-                    pv = val.pv
-                else:
-                    pv = "1.0"
-
-                print("%s %s %s %s" % (key, pn, pv, ' '.join(val.packages)))
-
-if __name__ == "__main__":
-    sys.exit(main(sys.argv[1:]))
-

bitbake/contrib/vim/ftdetect/bitbake.vim

@@ -10,8 +10,8 @@ if &compatible || version < 600
     finish
 endif
 
-" .bb, .bbappend and .bbclass
-au BufNewFile,BufRead *.{bb,bbappend,bbclass}	set filetype=bitbake
+" .bb and .bbclass
+au BufNewFile,BufRead *.b{b,bclass}	set filetype=bitbake
 
 " .inc
 au BufNewFile,BufRead *.inc 		set filetype=bitbake

bitbake/contrib/vim/syntax/bitbake.vim

@@ -52,8 +52,8 @@ syn match bbExport            "^export" nextgroup=bbIdentifier skipwhite
 syn keyword bbExportFlag        export contained nextgroup=bbIdentifier skipwhite
 syn match bbIdentifier          "[a-zA-Z0-9\-_\.\/\+]\+" display contained
 syn match bbVarDeref            "${[a-zA-Z0-9\-_\.\/\+]\+}" contained
-syn match bbVarEq               "\(:=\|+=\|=+\|\.=\|=\.\|?=\|??=\|=\)" contained nextgroup=bbVarValue
-syn match bbVarDef              "^\(export\s*\)\?\([a-zA-Z0-9\-_\.\/\+]\+\(_[${}a-zA-Z0-9\-_\.\/\+]\+\)\?\)\s*\(:=\|+=\|=+\|\.=\|=\.\|?=\|??=\|=\)\@=" contains=bbExportFlag,bbIdentifier,bbVarDeref nextgroup=bbVarEq
+syn match bbVarEq               "\(:=\|+=\|=+\|\.=\|=\.\|?=\|=\)" contained nextgroup=bbVarValue
+syn match bbVarDef              "^\(export\s*\)\?\([a-zA-Z0-9\-_\.\/\+]\+\(_[${}a-zA-Z0-9\-_\.\/\+]\+\)\?\)\s*\(:=\|+=\|=+\|\.=\|=\.\|?=\|=\)\@=" contains=bbExportFlag,bbIdentifier,bbVarDeref nextgroup=bbVarEq
 syn match bbVarValue            ".*$" contained contains=bbString,bbVarDeref,bbVarPyValue
 syn region bbVarPyValue         start=+${@+ skip=+\\$+ excludenl end=+}+ contained contains=@python
 

bitbake/doc/bitbake.1

@@ -104,30 +104,6 @@ Show debug logging for the specified logging domains
 .B \-P, \-\-profile
 profile the command and print a report
 .TP
-.B \-uUI, \-\-ui=UI
-User interface to use. Currently, hob, depexp, goggle or ncurses can be specified as UI.
-.TP
-.B \-tSERVERTYPE, \-\-servertype=SERVERTYPE
-Choose which server to use, none, process or xmlrpc.
-.TP
-.B \-\-revisions-changed
-Set the exit code depending on whether upstream floating revisions have changed or not.
-.TP
-.B \-\-server-only
-Run bitbake without UI,  the frontend can connect with bitbake server itself.
-.TP
-.B \-BBIND, \-\-bind=BIND
-The name/address for the bitbake server to bind to.
-.TP
-.B \-\-no\-setscene
-Do not run any setscene tasks, forces builds.
-
-.SH ENVIRONMENT VARIABLES
-bitbake uses the following environment variables to control its
-operation:
-.TP
-.B BITBAKE_UI
-The bitbake user interface; overridden by the \fB-u\fP commandline option.
 
 .SH AUTHORS
 BitBake was written by 

bitbake/doc/manual/usermanual.xml

@@ -12,10 +12,9 @@
             <corpauthor>BitBake Team</corpauthor>
         </authorgroup>
         <copyright>
-            <year>2004, 2005, 2006, 2011</year>
+            <year>2004, 2005, 2006</year>
             <holder>Chris Larson</holder>
             <holder>Phil Blundell</holder>
-            <holder>Richard Purdie</holder>
         </copyright>
         <legalnotice>
             <para>This work is licensed under the Creative Commons Attribution License. To view a copy of this license, visit <ulink url="http://creativecommons.org/licenses/by/2.5/">http://creativecommons.org/licenses/by/2.5/</ulink> or send a letter to Creative Commons, 559 Nathan Abbott Way, Stanford, California 94305, USA.</para>
@@ -27,7 +26,7 @@
             <title>Overview</title>
             <para>BitBake is, at its simplest, a tool for executing
 tasks and managing metadata.  As such, its similarities to GNU make and other
-build tools are readily apparent.  It was inspired by Portage, the package management system used by the Gentoo Linux distribution.  BitBake is the basis of the <ulink url="http://www.openembedded.org/">OpenEmbedded</ulink> project, which is being used to build and maintain a number of embedded Linux distributions/projects such as Angstrom and the Yocto project.</para>
+build tools are readily apparent.  It was inspired by Portage, the package management system used by the Gentoo Linux distribution.  BitBake is the basis of the <ulink url="http://www.openembedded.org/">OpenEmbedded</ulink> project, which is being used to build and maintain a number of embedded Linux distributions, including OpenZaurus and Familiar.</para>
         </section>
         <section>
             <title>Background and goals</title>
@@ -38,7 +37,7 @@ important functionality, and none of the ad-hoc
 <emphasis>buildroot</emphasis> systems, prevalent in the
 embedded space, were scalable or maintainable.</para>
 
-      <para>Some important original goals for BitBake were:
+      <para>Some important goals for BitBake were:
             <itemizedlist>
                 <listitem><para>Handle crosscompilation.</para></listitem>
                 <listitem><para>Handle interpackage dependencies (build time on target architecture, build time on native architecture, and runtime).</para></listitem>
@@ -54,18 +53,10 @@ between multiple projects using BitBake for their
 builds.</para></listitem>
 		<listitem><para>Should provide an inheritance mechanism to
 share common metadata between many packages.</para></listitem>
+                <listitem><para>Et cetera...</para></listitem>
             </itemizedlist>
         </para>
-        <para>Over time it has become apparent that some further requirements were necessary:
-            <itemizedlist>
-                <listitem><para>Handle variants of a base recipe (native, sdk, multilib).</para></listitem>
-                <listitem><para>Able to split metadata into layers and allow layers to override each other.</para></listitem>
-                <listitem><para>Allow representation of a given set of input variables to a task as a checksum.</para></listitem>
-                <listitem><para>based on that checksum, allow acceleration of builds with prebuilt components.</para></listitem>
-            </itemizedlist>
-        </para>
-
-        <para>BitBake satisfies all the original requirements and many more with extensions being made to the basic functionality to reflect the additionl requirements.  Flexibility and power have always been the priorities.  It is highly extensible, supporting embedded Python code and execution of any arbitrary tasks.</para>
+        <para>BitBake satisfies all these and many more.  Flexibility and power have always been the priorities.  It is highly extensible, supporting embedded Python code and execution of any arbitrary tasks.</para>
         </section>
     </chapter>
     <chapter>
@@ -103,10 +94,10 @@ share common metadata between many packages.</para></listitem>
                 <para>If <varname>A</varname> is set before the above is called, it will retain its previous value. If <varname>A</varname> is unset prior to the above call, <varname>A</varname> will be set to <literal>aval</literal>.  Note that this assignment is immediate, so if there are multiple ?= assignments to a single variable, the first of those will be used.</para>
             </section>
             <section>
-                <title>Setting a weak default value (??=)</title>
-                <para><screen><varname>A</varname> ??= "somevalue"
-<varname>A</varname> ??= "someothervalue"</screen></para>
-                <para>If <varname>A</varname> is set before the above, it will retain that value.  If <varname>A</varname> is unset prior to the above, <varname>A</varname> will be set to <literal>someothervalue</literal>.  This is a lazy/weak assignment in that the assignment does not occur until the end of the parsing process, so that the last, rather than the first, ??= assignment to a given variable will be used. Any other setting of A using = or ?= will however override the value set with ??=</para>
+                <title>Setting a default value (??=)</title>
+                <para><screen><varname>A</varname> ??= "somevalue"</screen></para>
+                <para><screen><varname>A</varname> ??= "someothervalue"</screen></para>
+                <para>If <varname>A</varname> is set before the above, it will retain that value.  If <varname>A</varname> is unset prior to the above, <varname>A</varname> will be set to <literal>someothervalue</literal>.  This is a lazy version of ??=, in that the assignment does not occur until the end of the parsing process, so that the last, rather than the first, ??= assignment to a given variable will be used.</para>
             </section>
             <section>
                 <title>Immediate variable expansion (:=)</title>
@@ -186,7 +177,7 @@ include</literal> directive.</para>
                 <title>Defining Python functions into the global Python namespace</title>
                 <para><emphasis>NOTE:</emphasis> This is only supported in .bb and .bbclass files.</para>
                 <para><screen>def get_depends(bb, d):
-    if d.getVar('SOMECONDITION', True):
+    if bb.data.getVar('SOMECONDITION', d, True):
         return "dependencywithcond"
     else:
         return "dependency"
@@ -204,7 +195,7 @@ include</literal> directive.</para>
             <section>
                 <title>Inheritance</title>
                 <para><emphasis>NOTE:</emphasis> This is only supported in .bb and .bbclass files.</para>
-                <para>The <literal>inherit</literal> directive is a means of specifying what classes of functionality your .bb requires.  It is a rudimentary form of inheritance.  For example, you can easily abstract out the tasks involved in building a package that uses autoconf and automake, and put that into a bbclass for your packages to make use of.  A given bbclass is located by searching for classes/filename.bbclass in <envar>BBPATH</envar>, where filename is what you inherited.</para>
+                <para>The <literal>inherit</literal> directive is a means of specifying what classes of functionality your .bb requires.  It is a rudimentary form of inheritance.  For example, you can easily abstract out the tasks involved in building a package that uses autoconf and automake, and put that into a bbclass for your packages to make use of.  A given bbclass is located by searching for classes/filename.oeclass in <envar>BBPATH</envar>, where filename is what you inherited.</para>
             </section>
             <section>
                 <title>Tasks</title>
@@ -218,19 +209,6 @@ include</literal> directive.</para>
 addtask printdate before do_build</screen></para>
                 <para>This defines the necessary Python function and adds it as a task which is now a dependency of do_build, the default task.  If anyone executes the do_build task, that will result in do_printdate being run first.</para>
             </section>
-
-            <section>
-                <title>Task Flags</title>
-                <para>Tasks support a number of flags which control various functionality of the task. These are as follows:</para>
-                <para>'dirs' - directories which should be created before the task runs</para>
-                <para>'cleandirs' - directories which should created before the task runs but should be empty</para>
-                <para>'noexec' - marks the tasks as being empty and no execution required. These are used as dependency placeholders or used when added tasks need to be subsequently disabled.</para>
-                <para>'nostamp' - don't generate a stamp file for a task. This means the task is always rexecuted.</para>
-                <para>'fakeroot' - this task needs to be run in a fakeroot environment, obtained by adding the variables in FAKEROOTENV to the environment.</para>
-                <para>'umask' - the umask to run the task under.</para>
-                <para> For the 'deptask', 'rdeptask', 'depends', 'rdepends' and 'recrdeptask' flags please see the dependencies section.</para>
-            </section>
-
             <section>
                 <title>Events</title>
                 <para><emphasis>NOTE:</emphasis> This is only supported in .bb and .bbclass files.</para>
@@ -251,7 +229,7 @@ of the event and the content of the <varname>FILE</varname> variable.</para>
             <section>
                 <title>Variants</title>
                 <para>Two BitBake features exist to facilitate the creation of multiple buildable incarnations from a single recipe file.</para>
-                <para>The first is <varname>BBCLASSEXTEND</varname>.  This variable is a space separated list of classes used to "extend" the recipe for each variant.  As an example, setting <screen>BBCLASSEXTEND = "native"</screen> results in a second incarnation of the current recipe being available.  This second incarnation will have the "native" class inherited.</para>
+                <para>The first is <varname>BBCLASSEXTEND</varname>.  This variable is a space separated list of classes used to "extend" the recipe for each variant.  As an example, setting <screen>BBCLASSEXTEND = "native"</screen> results in a second incarnation of the current recipe being available.  This second incarantion will have the "native" class inherited.</para>
                 <para>The second feature is <varname>BBVERSIONS</varname>.  This variable allows a single recipe to build multiple versions of a project from a single recipe file, and allows you to specify conditional metadata (using the <varname>OVERRIDES</varname> mechanism) for a single version, or an optionally named range of versions:</para>
                 <para><screen>BBVERSIONS = "1.0 2.0 git"
 SRC_URI_git = "git://someurl/somepath.git"</screen></para>
@@ -261,82 +239,39 @@ SRC_URI_append_1.0.7+ = "file://some_patch_which_the_new_versions_need.patch;pat
                 <para>Note that the name of the range will default to the original version of the recipe, so given OE, a recipe file of foo_1.0.0+.bb will default the name of its versions to 1.0.0+.  This is useful, as the range name is not only placed into overrides; it's also made available for the metadata to use in the form of the <varname>BPV</varname> variable, for use in file:// search paths (<varname>FILESPATH</varname>).</para>
             </section>
         </section>
-
-        <section>
-            <title>Variable interaction: Worked Examples</title>
-            <para>Despite the documentation of the different forms of variable definition above, it can be hard to work out what happens when variable operators are combined. This section documents some common questions people have regarding the way variables interact.</para>
-
-            <section>
-                <title>Override and append ordering</title>
-
-                <para>There is often confusion about which order overrides and the various append operators take effect.</para>
-
-                <para><screen><varname>OVERRIDES</varname> = "foo"
-<varname>A_foo_append</varname> = "X"</screen></para>
-                <para>In this case, X is unconditionally appended to the variable <varname>A_foo</varname>. Since foo is an override, A_foo would then replace <varname>A</varname>.</para>
-
-                 <para><screen><varname>OVERRIDES</varname> = "foo"
-<varname>A</varname> = "X"
-<varname>A_append_foo</varname> = "Y"</screen></para>
-                <para>In this case, only when foo is in OVERRIDES, Y is appended to the variable <varname>A</varname> so the value of <varname>A</varname> would become XY (NB: no spaces are appended).</para>
-
-                <para><screen><varname>OVERRIDES</varname> = "foo"
-<varname>A_foo_append</varname> = "X"
-<varname>A_foo_append</varname> += "Y"</screen></para>
-                <para>This behaves as per the first case above, but the value of <varname>A</varname> would be "X Y" instead of just "X".</para>
-
-                <para><screen><varname>A</varname> = "1"
-<varname>A_append</varname> = "2"
-<varname>A_append</varname> = "3"
-<varname>A</varname> += "4"
-<varname>A</varname> .= "5"</screen></para>
-
-                <para>Would ultimately result in <varname>A</varname> taking the value "1 4523" since the _append operator executes at the same time as the expansion of other overrides.</para>
-
-            </section>
-            <section>
-                <title>Key Expansion</title>
-
-                <para>Key expansion happens at the data store finalisation time just before overrides are expanded.</para>
-
-                <para><screen><varname>A${B}</varname> = "X"
-<varname>B</varname> = "2"
-<varname>A2</varname> = "Y"</screen></para>
-                <para>So in this case <varname>A2</varname> would take the value of "X".</para>
-            </section>
-
-        </section>
         <section>
             <title>Dependency handling</title>
-            <para>BitBake handles dependencies at the task level since to allow for efficient operation with multiple processed executing in parallel. A robust method of specifying task dependencies is therefore needed. </para>
+            <para>BitBake 1.7.x onwards works with the metadata at the task level since this is optimal when dealing with multiple threads of execution. A robust method of specifing task dependencies is therefore needed. </para>
             <section>
                 <title>Dependencies internal to the .bb file</title>
                 <para>Where the dependencies are internal to a given .bb file, the dependencies are handled by the previously detailed addtask directive.</para>
             </section>
 
             <section>
-                <title>Build Dependencies</title>
+                <title>DEPENDS</title>
                 <para>DEPENDS lists build time dependencies. The 'deptask' flag for tasks is used to signify the task of each item listed in DEPENDS which must have completed before that task can be executed.</para>
                 <para><screen>do_configure[deptask] = "do_populate_staging"</screen></para>
                 <para>means the do_populate_staging task of each item in DEPENDS must have completed before do_configure can execute.</para>
             </section>
             <section>
-                <title>Runtime Dependencies</title>
-                <para>The PACKAGES variable lists runtime packages and each of these can have RDEPENDS and RRECOMMENDS runtime dependencies. The 'rdeptask' flag for tasks is used to signify the task of each item runtime dependency which must have completed before that task can be executed.</para>
+                <title>RDEPENDS</title>
+                <para>RDEPENDS lists runtime dependencies. The 'rdeptask' flag for tasks is used to signify the task of each item listed in RDEPENDS which must have completed before that task can be executed.</para>
                 <para><screen>do_package_write[rdeptask] = "do_package"</screen></para>
                 <para>means the do_package task of each item in RDEPENDS must have completed before do_package_write can execute.</para>
             </section>
             <section>
-                <title>Recursive Dependencies</title>
-                <para>These are specified with the 'recrdeptask' flag which is used signify the task(s) of dependencies which must have completed before that task can be executed. It works by looking though the build and runtime dependencies of the current recipe as well as any inter-task dependencies the task has, then adding a dependency on the listed task. It will then recurse through the dependencies of those tasks and so on.</para>
-                <para>It may be desireable to recurse not just through the dependencies of those tasks but through the build and runtime dependencies of dependent tasks too. If that is the case, the taskname itself should be referenced in the task list, e.g. do_a[recrdeptask] = "do_a do_b".</para>
+                <title>Recursive DEPENDS</title>
+                <para>These are specified with the 'recdeptask' flag and is used signify the task(s) of each DEPENDS which must have completed before that task can be executed. It applies recursively so the DEPENDS of each item in the original DEPENDS must be met and so on.</para>
+            </section>
+            <section>
+                <title>Recursive RDEPENDS</title>
+                <para>These are specified with the 'recrdeptask' flag and is used signify the task(s) of each RDEPENDS which must have completed before that task can be executed. It applies recursively so the RDEPENDS of each item in the original RDEPENDS must be met and so on. It also runs all DEPENDS first.</para>
             </section>
             <section>
                 <title>Inter task</title>
-                <para>The 'depends' flag for tasks is a more generic form of which allows an interdependency on specific tasks rather than specifying the data in DEPENDS.</para>
+                <para>The 'depends' flag for tasks is a more generic form of which allows an interdependency on specific tasks rather than specifying the data in DEPENDS or RDEPENDS.</para>
                 <para><screen>do_patch[depends] = "quilt-native:do_populate_staging"</screen></para>
                 <para>means the do_populate_staging task of the target quilt-native must have completed before the do_patch can execute.</para>
-                <para>The 'rdepends' flag works in a similar way but takes targets in the runtime namespace instead of the build time dependency namespace.</para>
             </section>
         </section>
 
@@ -364,35 +299,13 @@ SRC_URI_append_1.0.7+ = "file://some_patch_which_the_new_versions_need.patch;pat
         <title>File download support</title>
         <section>
             <title>Overview</title>
-            <para>BitBake provides support to download files this procedure is called fetching and it handled by the fetch and fetch2 modules. At this point the original fetch code is considered to be replaced by fetch2 and this manual only related to the fetch2 codebase.</para>
-
-            <para>The SRC_URI is normally used to tell BitBake which files to fetch. The next sections will describe the available fetchers and their options. Each fetcher honors a set of variables and per URI parameters separated by a <quote>;</quote> consisting of a key and a value. The semantics of the variables and parameters are defined by the fetcher. BitBake tries to have consistent semantics between the different fetchers.
+            <para>BitBake provides support to download files this procedure is called fetching. The SRC_URI is normally used to tell BitBake which files to fetch. The next sections will describe the available fetchers and their options. Each fetcher honors a set of variables and per URI parameters separated by a <quote>;</quote> consisting of a key and a value. The semantics of the variables and parameters are defined by the fetcher. BitBake tries to have consistent semantics between the different fetchers.
             </para>
-
-            <para>The overall fetch process is that first, fetches are attempted from PREMIRRORS. If those don't work, the original SRC_URI is attempted and if that fails, BitBake will fall back to MIRRORS. Cross urls are supported, so its possible to mirror a git repository on an http server as a tarball for example. Some example commonly used mirror definitions are:</para>
-
-            <para><screen><varname>PREMIRRORS</varname> ?= "\
-bzr://.*/.*   http://somemirror.org/sources/ \n \
-cvs://.*/.*   http://somemirror.org/sources/ \n \
-git://.*/.*   http://somemirror.org/sources/ \n \
-hg://.*/.*    http://somemirror.org/sources/ \n \
-osc://.*/.*   http://somemirror.org/sources/ \n \
-p4://.*/.*    http://somemirror.org/sources/ \n \
-svk://.*/.*   http://somemirror.org/sources/ \n \
-svn://.*/.*   http://somemirror.org/sources/ \n"
-
-<varname>MIRRORS</varname> =+ "\
-ftp://.*/.*      http://somemirror.org/sources/ \n \
-http://.*/.*     http://somemirror.org/sources/ \n \
-https://.*/.*    http://somemirror.org/sources/ \n"</screen></para>
-
-            <para>Non-local downloaded output is placed into the directory specified by the <varname>DL_DIR</varname>. For non local archive downloads the code can verify sha256 and md5 checksums for the download to ensure the file has been downloaded correctly. These may be specified either in the form <varname>SRC_URI[md5sum]</varname> for the md5 checksum and <varname>SRC_URI[sha256sum]</varname> for the sha256 checksum or as parameters on the SRC_URI such as SRC_URI="http://example.com/foobar.tar.bz2;md5sum=4a8e0f237e961fd7785d19d07fdb994d". If <varname>BB_STRICT_CHECKSUM</varname> is set, any download without a checksum will trigger an error message. In cases where multiple files are listed in SRC_URI, the name parameter is used assign names to the urls and these are then specified in the checksums in the form SRC_URI[name.sha256sum].</para>
-
         </section>
 
         <section>
             <title>Local file fetcher</title>
-            <para>The URN for the local file fetcher is <emphasis>file</emphasis>. The filename can be either absolute or relative. If the filename is relative, <varname>FILESPATH</varname> and failing that <varname>FILESDIR</varname> will be used to find the appropriate relative file. The metadata usually extend these variables to include variations of the values in <varname>OVERRIDES</varname>. Single files and complete directories can be specified.
+            <para>The URN for the local file fetcher is <emphasis>file</emphasis>. The filename can be either absolute or relative. If the filename is relative, <varname>FILESPATH</varname> and <varname>FILESDIR</varname> will be used to find the appropriate relative file, depending on the <varname>OVERRIDES</varname>. Single files and complete directories can be specified.
 <screen><varname>SRC_URI</varname>= "file://relativefile.patch"
 <varname>SRC_URI</varname>= "file://relativefile.patch;this=ignored"
 <varname>SRC_URI</varname>= "file:///Users/ich/very_important_software"
@@ -401,8 +314,8 @@ https://.*/.*    http://somemirror.org/sources/ \n"</screen></para>
         </section>
 
         <section>
-            <title>CVS fetcher</title>
-            <para>The URN for the CVS fetcher is <emphasis>cvs</emphasis>. This fetcher honors the variables <varname>CVSDIR</varname>, <varname>SRCDATE</varname>, <varname>FETCHCOMMAND_cvs</varname>, <varname>UPDATECOMMAND_cvs</varname>. <varname>DL_DIR</varname> specifies where a temporary checkout is saved. <varname>SRCDATE</varname> specifies which date to use when doing the fetching (the special value of "now" will cause the checkout to be updated on every build). <varname>FETCHCOMMAND</varname> and <varname>UPDATECOMMAND</varname> specify which executables to use for the CVS checkout or update.
+            <title>CVS file fetcher</title>
+            <para>The URN for the CVS fetcher is <emphasis>cvs</emphasis>. This fetcher honors the variables <varname>DL_DIR</varname>, <varname>SRCDATE</varname>, <varname>FETCHCOMMAND_cvs</varname>, <varname>UPDATECOMMAND_cvs</varname>. <varname>DL_DIR</varname> specifies where a temporary checkout is saved. <varname>SRCDATE</varname> specifies which date to use when doing the fetching (the special value of "now" will cause the checkout to be updated on every build). <varname>FETCHCOMMAND</varname> and <varname>UPDATECOMMAND</varname> specify which executables to use for the CVS checkout or update.
             </para>
             <para>The supported parameters are <varname>module</varname>, <varname>tag</varname>, <varname>date</varname>, <varname>method</varname>, <varname>localdir</varname>, <varname>rsh</varname> and <varname>scmdata</varname>. The <varname>module</varname> specifies which module to check out, the <varname>tag</varname> describes which CVS TAG should be used for the checkout. By default the TAG is empty. A <varname>date</varname> can be specified to override the SRCDATE of the configuration to checkout a specific date.  The special value of "now" will cause the checkout to be updated on every build.<varname>method</varname> is by default <emphasis>pserver</emphasis>. If <emphasis>ext</emphasis> is used the <varname>rsh</varname> parameter will be evaluated and <varname>CVS_RSH</varname> will be set. Finally, <varname>localdir</varname> is used to checkout into a special directory relative to <varname>CVSDIR</varname>.
 
@@ -414,19 +327,28 @@ https://.*/.*    http://somemirror.org/sources/ \n"</screen></para>
 
         <section>
             <title>HTTP/FTP fetcher</title>
-            <para>The URNs for the HTTP/FTP fetcher are <emphasis>http</emphasis>, <emphasis>https</emphasis> and <emphasis>ftp</emphasis>. This fetcher honors the variables <varname>FETCHCOMMAND_wget</varname>. <varname>FETCHCOMMAND</varname> contains the command used for fetching. <quote>${URI}</quote> and <quote>${FILES}</quote> will be replaced by the URI and basename of the file to be fetched.
+            <para>The URNs for the HTTP/FTP fetcher are <emphasis>http</emphasis>, <emphasis>https</emphasis> and <emphasis>ftp</emphasis>. This fetcher honors the variables <varname>DL_DIR</varname>, <varname>FETCHCOMMAND_wget</varname>, <varname>PREMIRRORS</varname>, <varname>MIRRORS</varname>. The <varname>DL_DIR</varname> defines where to store the fetched file. <varname>FETCHCOMMAND</varname> contains the command used for fetching. <quote>${URI}</quote> and <quote>${FILES}</quote> will be replaced by the URI and basename of the file to be fetched. <varname>PREMIRRORS</varname> will be tried first when fetching a file. If that fails, the actual file will be tried and finally all <varname>MIRRORS</varname> will be tried.
             </para>
-            <para><screen><varname>SRC_URI</varname> = "http://oe.handhelds.org/not_there.aac"
-<varname>SRC_URI</varname> = "ftp://oe.handhelds.org/not_there_as_well.aac"
-<varname>SRC_URI</varname> = "ftp://you@oe.handheld.sorg/home/you/secret.plan"
+            <para>The only supported parameter is <varname>md5sum</varname>. After a fetch the <varname>md5sum</varname> of the file will be calculated and the two sums will be compared.
+            </para>
+            <para><screen><varname>SRC_URI</varname> = "http://oe.handhelds.org/not_there.aac;md5sum=12343"
+<varname>SRC_URI</varname> = "ftp://oe.handhelds.org/not_there_as_well.aac;md5sum=1234"
+<varname>SRC_URI</varname> = "ftp://you@oe.handheld.sorg/home/you/secret.plan;md5sum=1234"
 </screen></para>
         </section>
 
+        <section>
+            <title>SVK fetcher</title>
+            <para>
+            <emphasis>Currently NOT supported</emphasis>
+            </para>
+        </section>
+
         <section>
             <title>SVN fetcher</title>
             <para>The URN for the SVN fetcher is <emphasis>svn</emphasis>.
             </para>
-            <para>This fetcher honors the variables <varname>FETCHCOMMAND_svn</varname>, <varname>SVNDIR</varname>, <varname>SRCREV</varname>. <varname>FETCHCOMMAND</varname> contains the subversion command. <varname>SRCREV</varname> specifies which revision to use when doing the fetching.
+            <para>This fetcher honors the variables <varname>FETCHCOMMAND_svn</varname>, <varname>DL_DIR</varname>, <varname>SRCDATE</varname>. <varname>FETCHCOMMAND</varname> contains the subversion command. <varname>DL_DIR</varname> is the directory where tarballs will be saved. <varname>SRCDATE</varname> specifies which date to use when doing the fetching (the special value of "now" will cause the checkout to be updated on every build).
             </para>
             <para>The supported parameters are <varname>proto</varname>, <varname>rev</varname> and <varname>scmdata</varname>. <varname>proto</varname> is the Subversion protocol, <varname>rev</varname> is the Subversion revision. If <varname>scmdata</varname> is set to <quote>keep</quote>, the <quote>.svn</quote> directories will be available during compile-time.
             </para>
@@ -439,9 +361,9 @@ https://.*/.*    http://somemirror.org/sources/ \n"</screen></para>
             <title>GIT fetcher</title>
             <para>The URN for the GIT Fetcher is <emphasis>git</emphasis>.
             </para>
-            <para>The variable <varname>GITDIR</varname> will be used as the base directory where the git tree is cloned to.
+            <para>The Variables <varname>DL_DIR</varname>, <varname>GITDIR</varname> are used. <varname>DL_DIR</varname> will be used to store the checkedout version. <varname>GITDIR</varname> will be used as the base directory where the git tree is cloned to.
             </para>
-            <para>The parameters are <emphasis>tag</emphasis>, <emphasis>protocol</emphasis> and <emphasis>scmdata</emphasis>. <emphasis>tag</emphasis> is a Git tag, the default is <quote>master</quote>. <emphasis>protocol</emphasis> is the Git protocol to use and defaults to <quote>git</quote> if a hostname is set, otherwise its <quote>file</quote>. If <emphasis>scmdata</emphasis> is set to <quote>keep</quote>, the <quote>.git</quote> directory will be available during compile-time.
+            <para>The parameters are <emphasis>tag</emphasis>, <emphasis>protocol</emphasis> and <emphasis>scmdata</emphasis>. <emphasis>tag</emphasis> is a Git tag, the default is <quote>master</quote>. <emphasis>protocol</emphasis> is the Git protocol to use and defaults to <quote>rsync</quote>. If <emphasis>scmdata</emphasis> is set to <quote>keep</quote>, the <quote>.git</quote> directory will be available during compile-time.
             </para>
             <para><screen><varname>SRC_URI</varname> = "git://git.oe.handhelds.org/git/vip.git;tag=version-1"
 <varname>SRC_URI</varname> = "git://git.oe.handhelds.org/git/vip.git;protocol=http"

bitbake/lib/bb/__init__.py

@@ -21,24 +21,12 @@
 # with this program; if not, write to the Free Software Foundation, Inc.,
 # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 
-__version__ = "1.18.0"
+__version__ = "1.13.3"
 
 import sys
 if sys.version_info < (2, 6, 0):
     raise RuntimeError("Sorry, python 2.6.0 or later is required for this version of bitbake")
 
-
-class BBHandledException(Exception):
-    """
-    The big dilemma for generic bitbake code is what information to give the user
-    when an exception occurs. Any exception inheriting this base exception class
-    has already provided information to the user via some 'fired' message type such as
-    an explicitly fired event using bb.fire, or a bb.error message. If bitbake 
-    encounters an exception derived from this class, no backtrace or other information 
-    will be given to the user, its assumed the earlier event provided the relevant information.
-    """
-    pass
-
 import os
 import logging
 
@@ -68,14 +56,20 @@ logging.setLoggerClass(BBLogger)
 
 logger = logging.getLogger("BitBake")
 logger.addHandler(NullHandler())
-logger.setLevel(logging.DEBUG - 2)
+logger.setLevel(logging.INFO)
 
 # This has to be imported after the setLoggerClass, as the import of bb.msg
 # can result in construction of the various loggers.
 import bb.msg
 
-from bb import fetch2 as fetch
-sys.modules['bb.fetch'] = sys.modules['bb.fetch2']
+if "BBDEBUG" in os.environ:
+    level = int(os.environ["BBDEBUG"])
+    if level:
+        bb.msg.set_debug_level(level)
+
+if True or os.environ.get("BBFETCH2"):
+    from bb import fetch2 as fetch
+    sys.modules['bb.fetch'] = sys.modules['bb.fetch2']
 
 # Messaging convenience functions
 def plain(*args):

bitbake/lib/bb/build.py

@@ -29,7 +29,6 @@ import os
 import sys
 import logging
 import shlex
-import glob
 import bb
 import bb.msg
 import bb.process
@@ -54,7 +53,7 @@ class FuncFailed(Exception):
         self.logfile = logfile
         self.name = name
         if name:
-            self.msg = 'Function failed: %s' % name
+            self.msg = "Function '%s' failed" % name
         else:
             self.msg = "Function failed"
 
@@ -71,9 +70,9 @@ class TaskBase(event.Event):
 
     def __init__(self, t, d ):
         self._task = t
-        self._package = d.getVar("PF", True)
+        self._package = bb.data.getVar("PF", d, 1)
         event.Event.__init__(self)
-        self._message = "recipe %s: task %s: %s" % (d.getVar("PF", True), t, self.getDisplayName())
+        self._message = "package %s: task %s: %s" % (bb.data.getVar("PF", d, 1), t, bb.event.getName(self)[4:])
 
     def getTask(self):
         return self._task
@@ -81,9 +80,6 @@ class TaskBase(event.Event):
     def setTask(self, task):
         self._task = task
 
-    def getDisplayName(self):
-        return bb.event.getName(self)[4:]
-
     task = property(getTask, setTask, None, "task property")
 
 class TaskStarted(TaskBase):
@@ -95,20 +91,9 @@ class TaskSucceeded(TaskBase):
 class TaskFailed(TaskBase):
     """Task execution failed"""
 
-    def __init__(self, task, logfile, metadata, errprinted = False):
-        self.logfile = logfile
-        self.errprinted = errprinted
-        super(TaskFailed, self).__init__(task, metadata)
-
-class TaskFailedSilent(TaskBase):
-    """Task execution failed (silently)"""
     def __init__(self, task, logfile, metadata):
         self.logfile = logfile
-        super(TaskFailedSilent, self).__init__(task, metadata)
-
-    def getDisplayName(self):
-        # Don't need to tell the user it was silent
-        return "Failed"
+        super(TaskFailed, self).__init__(task, metadata)
 
 class TaskInvalid(TaskBase):
 
@@ -136,8 +121,7 @@ class LogTee(object):
 
     def __repr__(self):
         return '<LogTee {0}>'.format(self.name)
-    def flush(self):
-        self.outfile.flush()
+
 
 def exec_func(func, d, dirs = None):
     """Execute an BB 'function'"""
@@ -165,9 +149,12 @@ def exec_func(func, d, dirs = None):
         adir = dirs[-1]
     else:
         adir = data.getVar('B', d, 1)
-        bb.utils.mkdirhier(adir)
+        if not os.path.exists(adir):
+            adir = None
 
     ispython = flags.get('python')
+    if flags.get('fakeroot') and not flags.get('task'):
+        bb.fatal("Function %s specifies fakeroot but isn't a task?!" % func)
 
     lockflag = flags.get('lockfiles')
     if lockflag:
@@ -176,19 +163,8 @@ def exec_func(func, d, dirs = None):
         lockfiles = None
 
     tempdir = data.getVar('T', d, 1)
-
-    # or func allows items to be executed outside of the normal
-    # task set, such as buildhistory
-    task = data.getVar('BB_RUNTASK', d, 1) or func
-    if task == func:
-        taskfunc = task
-    else:
-        taskfunc = "%s.%s" % (task, func)
-
-    runfmt = data.getVar('BB_RUNFMT', d, 1) or "run.{func}.{pid}"
-    runfn = runfmt.format(taskfunc=taskfunc, task=task, func=func, pid=os.getpid())
-    runfile = os.path.join(tempdir, runfn)
-    bb.utils.mkdirhier(os.path.dirname(runfile))
+    bb.utils.mkdirhier(tempdir)
+    runfile = os.path.join(tempdir, 'run.{0}.{1}'.format(func, os.getpid()))
 
     with bb.utils.fileslocked(lockfiles):
         if ispython:
@@ -219,8 +195,6 @@ def exec_func_python(func, d, runfile, cwd=None):
             olddir = None
         os.chdir(cwd)
 
-    bb.debug(2, "Executing python function %s" % func)
-
     try:
         comp = utils.better_compile(code, func, bbfile)
         utils.better_exec(comp, {"d": d}, code, bbfile)
@@ -230,15 +204,13 @@ def exec_func_python(func, d, runfile, cwd=None):
 
         raise FuncFailed(func, None)
     finally:
-        bb.debug(2, "Python function %s finished" % func)
-
         if cwd and olddir:
             try:
                 os.chdir(olddir)
             except OSError:
                 pass
 
-def exec_func_shell(func, d, runfile, cwd=None):
+def exec_func_shell(function, d, runfile, cwd=None):
     """Execute a shell function from the metadata
 
     Note on directory behavior.  The 'dirs' varflag should contain a list
@@ -251,36 +223,27 @@ def exec_func_shell(func, d, runfile, cwd=None):
 
     with open(runfile, 'w') as script:
         script.write('#!/bin/sh -e\n')
-        data.emit_func(func, script, d)
-
-        if bb.msg.loggerVerboseLogs:
+        if logger.isEnabledFor(logging.DEBUG):
             script.write("set -x\n")
+        data.emit_func(function, script, d)
         if cwd:
             script.write("cd %s\n" % cwd)
-        script.write("%s\n" % func)
+        script.write("%s\n" % function)
 
     os.chmod(runfile, 0775)
 
     cmd = runfile
-    if d.getVarFlag(func, 'fakeroot'):
-        fakerootcmd = d.getVar('FAKEROOT', True)
-        if fakerootcmd:
-            cmd = [fakerootcmd, runfile]
 
-    if bb.msg.loggerDefaultVerbose:
+    if logger.isEnabledFor(logging.DEBUG):
         logfile = LogTee(logger, sys.stdout)
     else:
         logfile = sys.stdout
 
-    bb.debug(2, "Executing shell function %s" % func)
-
     try:
         bb.process.run(cmd, shell=False, stdin=NULL, log=logfile)
     except bb.process.CmdError:
         logfn = d.getVar('BB_LOGFILE', True)
-        raise FuncFailed(func, logfn)
-
-    bb.debug(2, "Shell function %s finished" % func)
+        raise FuncFailed(function, logfn)
 
 def _task_data(fn, task, d):
     localdata = data.createCopy(d)
@@ -311,46 +274,22 @@ def _exec_task(fn, task, d, quieterr):
         bb.fatal("T variable not set, unable to build")
 
     bb.utils.mkdirhier(tempdir)
-
-    # Determine the logfile to generate
-    logfmt = localdata.getVar('BB_LOGFMT', True) or 'log.{task}.{pid}'
-    logbase = logfmt.format(task=task, pid=os.getpid())
-
-    # Document the order of the tasks...
-    logorder = os.path.join(tempdir, 'log.task_order')
-    try:
-        logorderfile = file(logorder, 'a')
-    except OSError:
-        logger.exception("Opening log file '%s'", logorder)
-        pass
-    logorderfile.write('{0} ({1}): {2}\n'.format(task, os.getpid(), logbase))
-    logorderfile.close()
-
-    # Setup the courtesy link to the logfn
     loglink = os.path.join(tempdir, 'log.{0}'.format(task))
-    logfn = os.path.join(tempdir, logbase)
+    logfn = os.path.join(tempdir, 'log.{0}.{1}'.format(task, os.getpid()))
     if loglink:
         bb.utils.remove(loglink)
 
         try:
-           os.symlink(logbase, loglink)
+           os.symlink(logfn, loglink)
         except OSError:
            pass
 
     prefuncs = localdata.getVarFlag(task, 'prefuncs', expand=True)
     postfuncs = localdata.getVarFlag(task, 'postfuncs', expand=True)
 
-    class ErrorCheckHandler(logging.Handler):
-        def __init__(self):
-            self.triggered = False
-            logging.Handler.__init__(self, logging.ERROR)
-        def emit(self, record):
-            self.triggered = True
-
     # Handle logfiles
     si = file('/dev/null', 'r')
     try:
-        bb.utils.mkdirhier(os.path.dirname(logfn))
         logfile = file(logfn, 'w')
     except OSError:
         logger.exception("Opening log file '%s'", logfn)
@@ -369,15 +308,9 @@ def _exec_task(fn, task, d, quieterr):
     # Ensure python logging goes to the logfile
     handler = logging.StreamHandler(logfile)
     handler.setFormatter(logformatter)
-    # Always enable full debug output into task logfiles
-    handler.setLevel(logging.DEBUG - 2)
     bblogger.addHandler(handler)
 
-    errchk = ErrorCheckHandler()
-    bblogger.addHandler(errchk)
-
     localdata.setVar('BB_LOGFILE', logfn)
-    localdata.setVar('BB_RUNTASK', task)
 
     event.fire(TaskStarted(task, localdata), localdata)
     try:
@@ -387,12 +320,9 @@ def _exec_task(fn, task, d, quieterr):
         for func in (postfuncs or '').split():
             exec_func(func, localdata)
     except FuncFailed as exc:
-        if quieterr:
-            event.fire(TaskFailedSilent(task, logfn, localdata), localdata)
-        else:
-            errprinted = errchk.triggered
+        if not quieterr:
             logger.error(str(exc))
-            event.fire(TaskFailed(task, logfn, localdata, errprinted), localdata)
+            event.fire(TaskFailed(task, logfn, localdata), localdata)
         return 1
     finally:
         sys.stdout.flush()
@@ -423,33 +353,19 @@ def _exec_task(fn, task, d, quieterr):
 
     return 0
 
-def exec_task(fn, task, d, profile = False):
+def exec_task(fn, task, d):
     try: 
         quieterr = False
         if d.getVarFlag(task, "quieterrors") is not None:
             quieterr = True
 
-        if profile: 
-            profname = "profile-%s.log" % (os.path.basename(fn) + "-" + task)
-            try:
-                import cProfile as profile
-            except:
-                import profile
-            prof = profile.Profile()
-            ret = profile.Profile.runcall(prof, _exec_task, fn, task, d, quieterr)
-            prof.dump_stats(profname)
-            bb.utils.process_profilelog(profname)
-
-            return ret
-        else:
-            return _exec_task(fn, task, d, quieterr)
-
+        return _exec_task(fn, task, d, quieterr)
     except Exception:
         from traceback import format_exc
         if not quieterr:
             logger.error("Build of %s failed" % (task))
             logger.error(format_exc())
-            failedevent = TaskFailed(task, None, d, True)
+            failedevent = TaskFailed(task, None, d)
             event.fire(failedevent, d)
         return 1
 
@@ -479,55 +395,15 @@ def stamp_internal(taskname, d, file_name):
 
     stamp = bb.parse.siggen.stampfile(stamp, file_name, taskname, extrainfo)
 
-    stampdir = os.path.dirname(stamp)
-    if bb.parse.cached_mtime_noerror(stampdir) == 0:
-        bb.utils.mkdirhier(stampdir)
+    bb.utils.mkdirhier(os.path.dirname(stamp))
 
     return stamp
 
-def stamp_cleanmask_internal(taskname, d, file_name):
-    """
-    Internal stamp helper function to generate stamp cleaning mask
-    Returns the stamp path+filename
-
-    In the bitbake core, d can be a CacheData and file_name will be set.
-    When called in task context, d will be a data store, file_name will not be set
-    """
-    taskflagname = taskname
-    if taskname.endswith("_setscene") and taskname != "do_setscene":
-        taskflagname = taskname.replace("_setscene", "")
-
-    if file_name:
-        stamp = d.stamp_base_clean[file_name].get(taskflagname) or d.stampclean[file_name]
-        extrainfo = d.stamp_extrainfo[file_name].get(taskflagname) or ""
-    else:
-        stamp = d.getVarFlag(taskflagname, 'stamp-base-clean', True) or d.getVar('STAMPCLEAN', True)
-        file_name = d.getVar('BB_FILENAME', True)
-        extrainfo = d.getVarFlag(taskflagname, 'stamp-extra-info', True) or ""
-
-    if not stamp:
-        return []
-
-    cleanmask = bb.parse.siggen.stampcleanmask(stamp, file_name, taskname, extrainfo)
-
-    return [cleanmask, cleanmask.replace(taskflagname, taskflagname + "_setscene")]
-
 def make_stamp(task, d, file_name = None):
     """
     Creates/updates a stamp for a given task
     (d can be a data dict or dataCache)
     """
-    cleanmask = stamp_cleanmask_internal(task, d, file_name)
-    for mask in cleanmask:
-        for name in glob.glob(mask):
-            # Preserve sigdata files in the stamps directory
-            if "sigdata" in name:
-                continue
-            # Preserve taint files in the stamps directory
-            if name.endswith('.taint'):
-                continue
-            os.unlink(name)
-    
     stamp = stamp_internal(task, d, file_name)
     # Remove the file and recreate to force timestamp
     # change on broken NFS filesystems
@@ -550,24 +426,6 @@ def del_stamp(task, d, file_name = None):
     stamp = stamp_internal(task, d, file_name)
     bb.utils.remove(stamp)
 
-def write_taint(task, d, file_name = None):
-    """
-    Creates a "taint" file which will force the specified task and its
-    dependents to be re-run the next time by influencing the value of its
-    taskhash.
-    (d can be a data dict or dataCache)
-    """
-    import uuid
-    if file_name:
-        taintfn = d.stamp[file_name] + '.' + task + '.taint'
-    else:
-        taintfn = d.getVar('STAMP', True) + '.' + task + '.taint'
-    bb.utils.mkdirhier(os.path.dirname(taintfn))
-    # The specific content of the taint file is not really important,
-    # we just need it to be random, so a random UUID is used
-    with open(taintfn, 'w') as taintf:
-        taintf.write(str(uuid.uuid4()))
-
 def stampfile(taskname, d, file_name = None):
     """
     Return the stamp for a given task
@@ -599,7 +457,6 @@ def add_tasks(tasklist, d):
                 deptask = data.expand(flags[name], d)
                 task_deps[name][task] = deptask
         getTask('depends')
-        getTask('rdepends')
         getTask('deptask')
         getTask('rdeptask')
         getTask('recrdeptask')
@@ -608,10 +465,9 @@ def add_tasks(tasklist, d):
         getTask('noexec')
         getTask('umask')
         task_deps['parents'][task] = []
-        if 'deps' in flags:
-            for dep in flags['deps']:
-                dep = data.expand(dep, d)
-                task_deps['parents'][task].append(dep)
+        for dep in flags['deps']:
+            dep = data.expand(dep, d)
+            task_deps['parents'][task].append(dep)
 
     # don't assume holding a reference
     data.setVar('_task_deps', task_deps, d)

bitbake/lib/bb/cache.py

@@ -1,12 +1,11 @@
 # ex:ts=4:sw=4:sts=4:et
 # -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*-
 #
-# BitBake Cache implementation
+# BitBake 'Event' implementation
 #
 # Caching of bitbake variables before task execution
 
 # Copyright (C) 2006        Richard Purdie
-# Copyright (C) 2012        Intel Corporation
 
 # but small sections based on code from bin/bitbake:
 # Copyright (C) 2003, 2004  Chris Larson
@@ -32,6 +31,7 @@
 import os
 import logging
 from collections import defaultdict
+import bb.data
 import bb.utils
 
 logger = logging.getLogger("BitBake.Cache")
@@ -43,10 +43,10 @@ except ImportError:
     logger.info("Importing cPickle failed. "
                 "Falling back to a very slow implementation.")
 
-__cache_version__ = "145"
+__cache_version__ = "142"
 
-def getCacheFile(path, filename, data_hash):
-    return os.path.join(path, filename + "." + data_hash)
+def getCacheFile(path, filename):
+    return os.path.join(path, filename)
 
 # RecipeInfoCommon defines common data retrieving methods
 # from meta data for caches. CoreRecipeInfo as well as other
@@ -76,13 +76,9 @@ class RecipeInfoCommon(object):
                     for task in tasks)
 
     @classmethod
-    def flaglist(cls, flag, varlist, metadata, squash=False):
-        out_dict = dict((var, metadata.getVarFlag(var, flag, True))
+    def flaglist(cls, flag, varlist, metadata):
+        return dict((var, metadata.getVarFlag(var, flag, True))
                     for var in varlist)
-        if squash:
-            return dict((k,v) for (k,v) in out_dict.iteritems() if v)
-        else:
-            return out_dict
 
     @classmethod
     def getvar(cls, var, metadata):
@@ -119,6 +115,7 @@ class CoreRecipeInfo(RecipeInfoCommon):
         self.basetaskhashes = self.taskvar('BB_BASEHASH', self.tasks, metadata)
         self.hashfilename = self.getvar('BB_HASHFILENAME', metadata)
 
+        self.file_depends = metadata.getVar('__depends', False)
         self.task_deps = metadata.getVar('_task_deps', False) or {'tasks': [], 'parents': {}}
 
         self.skipped = False
@@ -126,13 +123,11 @@ class CoreRecipeInfo(RecipeInfoCommon):
         self.pv = self.getvar('PV', metadata)
         self.pr = self.getvar('PR', metadata)
         self.defaultpref = self.intvar('DEFAULT_PREFERENCE', metadata)
+        self.broken = self.getvar('BROKEN', metadata)
         self.not_world = self.getvar('EXCLUDE_FROM_WORLD', metadata)
         self.stamp = self.getvar('STAMP', metadata)
-        self.stampclean = self.getvar('STAMPCLEAN', metadata)        
         self.stamp_base = self.flaglist('stamp-base', self.tasks, metadata)
-        self.stamp_base_clean = self.flaglist('stamp-base-clean', self.tasks, metadata)
         self.stamp_extrainfo = self.flaglist('stamp-extra-info', self.tasks, metadata)
-        self.file_checksums = self.flaglist('file-checksums', self.tasks, metadata, True)
         self.packages_dynamic = self.listvar('PACKAGES_DYNAMIC', metadata)
         self.depends          = self.depvar('DEPENDS', metadata)
         self.provides         = self.depvar('PROVIDES', metadata)
@@ -143,9 +138,11 @@ class CoreRecipeInfo(RecipeInfoCommon):
         self.rdepends_pkg     = self.pkgvar('RDEPENDS', self.packages, metadata)
         self.rrecommends_pkg  = self.pkgvar('RRECOMMENDS', self.packages, metadata)
         self.inherits         = self.getvar('__inherit_cache', metadata)
+        self.summary          = self.getvar('SUMMARY', metadata)
+        self.license          = self.getvar('LICENSE', metadata)
+        self.section          = self.getvar('SECTION', metadata)
         self.fakerootenv      = self.getvar('FAKEROOTENV', metadata)
         self.fakerootdirs     = self.getvar('FAKEROOTDIRS', metadata)
-        self.fakerootnoenv    = self.getvar('FAKEROOTNOENV', metadata)
 
     @classmethod
     def init_cacheData(cls, cachedata):
@@ -157,11 +154,8 @@ class CoreRecipeInfo(RecipeInfoCommon):
         cachedata.pkg_dp = {}
 
         cachedata.stamp = {}
-        cachedata.stampclean = {}
         cachedata.stamp_base = {}
-        cachedata.stamp_base_clean = {}
         cachedata.stamp_extrainfo = {}
-        cachedata.file_checksums = {}
         cachedata.fn_provides = {}
         cachedata.pn_provides = defaultdict(list)
         cachedata.all_depends = []
@@ -180,8 +174,10 @@ class CoreRecipeInfo(RecipeInfoCommon):
 
         cachedata.basetaskhash = {}
         cachedata.inherits = {}
+        cachedata.summary = {}
+        cachedata.license = {}
+        cachedata.section = {}
         cachedata.fakerootenv = {}
-        cachedata.fakerootnoenv = {}
         cachedata.fakerootdirs = {}
 
     def add_cacheData(self, cachedata, fn):
@@ -191,11 +187,8 @@ class CoreRecipeInfo(RecipeInfoCommon):
         cachedata.pkg_pepvpr[fn] = (self.pe, self.pv, self.pr)
         cachedata.pkg_dp[fn] = self.defaultpref
         cachedata.stamp[fn] = self.stamp
-        cachedata.stampclean[fn] = self.stampclean
         cachedata.stamp_base[fn] = self.stamp_base
-        cachedata.stamp_base_clean[fn] = self.stamp_base_clean
         cachedata.stamp_extrainfo[fn] = self.stamp_extrainfo
-        cachedata.file_checksums[fn] = self.file_checksums
 
         provides = [self.pn]
         for provide in self.provides:
@@ -232,7 +225,7 @@ class CoreRecipeInfo(RecipeInfoCommon):
 
         # Collect files we may need for possible world-dep
         # calculations
-        if not self.not_world:
+        if not self.broken and not self.not_world:
             cachedata.possible_world.append(fn)
 
         # create a collection of all targets for sanity checking
@@ -246,8 +239,10 @@ class CoreRecipeInfo(RecipeInfoCommon):
             cachedata.basetaskhash[identifier] = taskhash
 
         cachedata.inherits[fn] = self.inherits
+        cachedata.summary[fn] = self.summary
+        cachedata.license[fn] = self.license
+        cachedata.section[fn] = self.section
         cachedata.fakerootenv[fn] = self.fakerootenv
-        cachedata.fakerootnoenv[fn] = self.fakerootnoenv
         cachedata.fakerootdirs[fn] = self.fakerootdirs
 
 
@@ -257,19 +252,18 @@ class Cache(object):
     BitBake Cache implementation
     """
 
-    def __init__(self, data, data_hash, caches_array):
+    def __init__(self, data, caches_array):
         # Pass caches_array information into Cache Constructor
         # It will be used in later for deciding whether we 
         # need extra cache file dump/load support 
         self.caches_array = caches_array
-        self.cachedir = data.getVar("CACHE", True)
+        self.cachedir = bb.data.getVar("CACHE", data, True)
         self.clean = set()
         self.checked = set()
         self.depends_cache = {}
         self.data = None
         self.data_fn = None
         self.cacheclean = True
-        self.data_hash = data_hash
 
         if self.cachedir in [None, '']:
             self.has_cache = False
@@ -278,19 +272,28 @@ class Cache(object):
             return
 
         self.has_cache = True
-        self.cachefile = getCacheFile(self.cachedir, "bb_cache.dat", self.data_hash)
+        self.cachefile = getCacheFile(self.cachedir, "bb_cache.dat")
 
         logger.debug(1, "Using cache in '%s'", self.cachedir)
         bb.utils.mkdirhier(self.cachedir)
 
-        cache_ok = True
+        # If any of configuration.data's dependencies are newer than the
+        # cache there isn't even any point in loading it...
+        newest_mtime = 0
+        deps = bb.data.getVar("__base_depends", data)
+
+        old_mtimes = [old_mtime for _, old_mtime in deps]
+        old_mtimes.append(newest_mtime)
+        newest_mtime = max(old_mtimes)
+
+        bNeedUpdate = True
         if self.caches_array:
             for cache_class in self.caches_array:
                 if type(cache_class) is type and issubclass(cache_class, RecipeInfoCommon):
-                    cachefile = getCacheFile(self.cachedir, cache_class.cachefile, self.data_hash)
-                    cache_ok = cache_ok and os.path.exists(cachefile)
+                    cachefile = getCacheFile(self.cachedir, cache_class.cachefile)
+                    bNeedUpdate = bNeedUpdate and (bb.parse.cached_mtime_noerror(cachefile) >= newest_mtime)
                     cache_class.init_cacheData(self)
-        if cache_ok:
+        if bNeedUpdate:
             self.load_cachefile()
         elif os.path.isfile(self.cachefile):
             logger.info("Out of date cache found, rebuilding...")
@@ -322,7 +325,7 @@ class Cache(object):
         # Calculate the correct cachesize of all those cache files
         for cache_class in self.caches_array:
             if type(cache_class) is type and issubclass(cache_class, RecipeInfoCommon):
-                cachefile = getCacheFile(self.cachedir, cache_class.cachefile, self.data_hash)
+                cachefile = getCacheFile(self.cachedir, cache_class.cachefile)
                 with open(cachefile, "rb") as cachefile:
                     cachesize += os.fstat(cachefile.fileno()).st_size
 
@@ -330,7 +333,7 @@ class Cache(object):
         
         for cache_class in self.caches_array:
             if type(cache_class) is type and issubclass(cache_class, RecipeInfoCommon):
-                cachefile = getCacheFile(self.cachedir, cache_class.cachefile, self.data_hash)
+                cachefile = getCacheFile(self.cachedir, cache_class.cachefile)
                 with open(cachefile, "rb") as cachefile:
                     pickled = pickle.Unpickler(cachefile)                    
                     while cachefile:
@@ -348,7 +351,7 @@ class Cache(object):
                         current_percent = 100 * current_progress / cachesize
                         if current_percent > previous_percent:
                             previous_percent = current_percent
-                            bb.event.fire(bb.event.CacheLoadProgress(current_progress, cachesize),
+                            bb.event.fire(bb.event.CacheLoadProgress(current_progress),
                                           self.data)
 
                     previous_progress += current_progress
@@ -403,12 +406,12 @@ class Cache(object):
         """Parse the specified filename, returning the recipe information"""
         infos = []
         datastores = cls.load_bbfile(filename, appends, configdata)
-        depends = []
+        depends = set()
         for variant, data in sorted(datastores.iteritems(),
                                     key=lambda i: i[0],
                                     reverse=True):
             virtualfn = cls.realfn2virtual(filename, variant)
-            depends = depends + (data.getVar("__depends", False) or [])
+            depends |= (data.getVar("__depends", False) or set())
             if depends and not variant:
                 data.setVar("__depends", depends)
 
@@ -526,7 +529,7 @@ class Cache(object):
 
         if appends != info_array[0].appends:
             logger.debug(2, "Cache: appends for %s changed", fn)
-            logger.debug(2, "%s to %s" % (str(appends), str(info_array[0].appends)))
+            bb.note("%s to %s" % (str(appends), str(info_array[0].appends)))
             self.remove(fn)
             return False
 
@@ -583,7 +586,7 @@ class Cache(object):
         for cache_class in self.caches_array:
             if type(cache_class) is type and issubclass(cache_class, RecipeInfoCommon):
                 cache_class_name = cache_class.__name__
-                cachefile = getCacheFile(self.cachedir, cache_class.cachefile, self.data_hash)
+                cachefile = getCacheFile(self.cachedir, cache_class.cachefile)
                 file_dict[cache_class_name] = open(cachefile, "wb")
                 pickler_dict[cache_class_name] =  pickle.Pickler(file_dict[cache_class_name], pickle.HIGHEST_PROTOCOL)
                    
@@ -688,7 +691,7 @@ def init(cooker):
     Files causing parsing errors are evicted from the cache.
 
     """
-    return Cache(cooker.configuration.data, cooker.configuration.data_hash)
+    return Cache(cooker.configuration.data)
 
 
 class CacheData(object):
@@ -715,115 +718,4 @@ class CacheData(object):
         for info in info_array:
             info.add_cacheData(self, fn)
 
-
-class MultiProcessCache(object):
-    """
-    BitBake multi-process cache implementation
-
-    Used by the codeparser & file checksum caches
-    """
-
-    def __init__(self):
-        self.cachefile = None
-        self.cachedata = self.create_cachedata()
-        self.cachedata_extras = self.create_cachedata()
-
-    def init_cache(self, d):
-        cachedir = (d.getVar("PERSISTENT_DIR", True) or
-                    d.getVar("CACHE", True))
-        if cachedir in [None, '']:
-            return
-        bb.utils.mkdirhier(cachedir)
-        self.cachefile = os.path.join(cachedir, self.__class__.cache_file_name)
-        logger.debug(1, "Using cache in '%s'", self.cachefile)
-
-        try:
-            p = pickle.Unpickler(file(self.cachefile, "rb"))
-            data, version = p.load()
-        except:
-            return
-
-        if version != self.__class__.CACHE_VERSION:
-            return
-
-        self.cachedata = data
-
-    def internSet(self, items):
-        new = set()
-        for i in items:
-            new.add(intern(i))
-        return new
-
-    def compress_keys(self, data):
-        # Override in subclasses if desired
-        return
-
-    def create_cachedata(self):
-        data = [{}]
-        return data
-
-    def save_extras(self, d):
-        if not self.cachefile:
-            return
-
-        glf = bb.utils.lockfile(self.cachefile + ".lock", shared=True)
-
-        i = os.getpid()
-        lf = None
-        while not lf:
-            lf = bb.utils.lockfile(self.cachefile + ".lock." + str(i), retry=False)
-            if not lf or os.path.exists(self.cachefile + "-" + str(i)):
-                if lf:
-                    bb.utils.unlockfile(lf)
-                    lf = None
-                i = i + 1
-                continue
-
-            p = pickle.Pickler(file(self.cachefile + "-" + str(i), "wb"), -1)
-            p.dump([self.cachedata_extras, self.__class__.CACHE_VERSION])
-
-        bb.utils.unlockfile(lf)
-        bb.utils.unlockfile(glf)
-
-    def merge_data(self, source, dest):
-        for j in range(0,len(dest)):
-            for h in source[j]:
-                if h not in dest[j]:
-                    dest[j][h] = source[j][h]
-
-    def save_merge(self, d):
-        if not self.cachefile:
-            return
-
-        glf = bb.utils.lockfile(self.cachefile + ".lock")
-
-        try:
-            p = pickle.Unpickler(file(self.cachefile, "rb"))
-            data, version = p.load()
-        except (IOError, EOFError):
-            data, version = None, None
-
-        if version != self.__class__.CACHE_VERSION:
-            data = self.create_cachedata()
-
-        for f in [y for y in os.listdir(os.path.dirname(self.cachefile)) if y.startswith(os.path.basename(self.cachefile) + '-')]:
-            f = os.path.join(os.path.dirname(self.cachefile), f)
-            try:
-                p = pickle.Unpickler(file(f, "rb"))
-                extradata, version = p.load()
-            except (IOError, EOFError):
-                extradata, version = self.create_cachedata(), None
-
-            if version != self.__class__.CACHE_VERSION:
-                continue
-
-            self.merge_data(extradata, data)
-            os.unlink(f)
-
-        self.compress_keys(data)
-
-        p = pickle.Pickler(file(self.cachefile, "wb"), -1)
-        p.dump([data, self.__class__.CACHE_VERSION])
-
-        bb.utils.unlockfile(glf)
-
+        

bitbake/lib/bb/cache_extra.py

@@ -40,11 +40,6 @@ class HobRecipeInfo(RecipeInfoCommon):
         self.summary = self.getvar('SUMMARY', metadata)
         self.license = self.getvar('LICENSE', metadata)
         self.section = self.getvar('SECTION', metadata)
-        self.description = self.getvar('DESCRIPTION', metadata)
-        self.homepage = self.getvar('HOMEPAGE', metadata)
-        self.bugtracker = self.getvar('BUGTRACKER', metadata)
-        self.prevision = self.getvar('PR', metadata)
-        self.files_info = self.getvar('FILES_INFO', metadata)
 
     @classmethod
     def init_cacheData(cls, cachedata):
@@ -52,18 +47,8 @@ class HobRecipeInfo(RecipeInfoCommon):
         cachedata.summary = {}
         cachedata.license = {}
         cachedata.section = {}
-        cachedata.description = {}
-        cachedata.homepage = {}
-        cachedata.bugtracker = {}
-        cachedata.prevision = {}
-        cachedata.files_info = {}
 
     def add_cacheData(self, cachedata, fn):
         cachedata.summary[fn] = self.summary
         cachedata.license[fn] = self.license
         cachedata.section[fn] = self.section
-        cachedata.description[fn] = self.description
-        cachedata.homepage[fn] = self.homepage
-        cachedata.bugtracker[fn] = self.bugtracker
-        cachedata.prevision[fn] = self.prevision
-        cachedata.files_info[fn] = self.files_info

bitbake/lib/bb/checksum.py

@@ -1,90 +0,0 @@
-# Local file checksum cache implementation
-#
-# Copyright (C) 2012 Intel Corporation
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-import os
-import stat
-import bb.utils
-import logging
-from bb.cache import MultiProcessCache
-
-logger = logging.getLogger("BitBake.Cache")
-
-try:
-    import cPickle as pickle
-except ImportError:
-    import pickle
-    logger.info("Importing cPickle failed. "
-                "Falling back to a very slow implementation.")
-
-
-# mtime cache (non-persistent)
-# based upon the assumption that files do not change during bitbake run
-class FileMtimeCache(object):
-    cache = {}
-
-    def cached_mtime(self, f):
-        if f not in self.cache:
-            self.cache[f] = os.stat(f)[stat.ST_MTIME]
-        return self.cache[f]
-
-    def cached_mtime_noerror(self, f):
-        if f not in self.cache:
-            try:
-                self.cache[f] = os.stat(f)[stat.ST_MTIME]
-            except OSError:
-                return 0
-        return self.cache[f]
-
-    def update_mtime(self, f):
-        self.cache[f] = os.stat(f)[stat.ST_MTIME]
-        return self.cache[f]
-
-    def clear(self):
-        self.cache.clear()
-
-# Checksum + mtime cache (persistent)
-class FileChecksumCache(MultiProcessCache):
-    cache_file_name = "local_file_checksum_cache.dat"
-    CACHE_VERSION = 1
-
-    def __init__(self):
-        self.mtime_cache = FileMtimeCache()
-        MultiProcessCache.__init__(self)
-
-    def get_checksum(self, f):
-        entry = self.cachedata[0].get(f)
-        cmtime = self.mtime_cache.cached_mtime(f)
-        if entry:
-            (mtime, hashval) = entry
-            if cmtime == mtime:
-                return hashval
-            else:
-                bb.debug(2, "file %s changed mtime, recompute checksum" % f)
-
-        hashval = bb.utils.md5_file(f)
-        self.cachedata_extras[0][f] = (cmtime, hashval)
-        return hashval
-
-    def merge_data(self, source, dest):
-        for h in source[0]:
-            if h in dest:
-                (smtime, _) = source[0][h]
-                (dmtime, _) = dest[0][h]
-                if smtime > dmtime:
-                    dest[0][h] = source[0][h]
-            else:
-                dest[0][h] = source[0][h]

bitbake/lib/bb/codeparser.py

@@ -5,10 +5,10 @@ import os.path
 import bb.utils, bb.data
 from itertools import chain
 from pysh import pyshyacc, pyshlex, sherrors
-from bb.cache import MultiProcessCache
 
 
 logger = logging.getLogger('BitBake.CodeParser')
+PARSERCACHE_VERSION = 2
 
 try:
     import cPickle as pickle
@@ -32,166 +32,263 @@ def check_indent(codestr):
 
     return codestr
 
+pythonparsecache = {}
+shellparsecache = {}
 
-class CodeParserCache(MultiProcessCache):
-    cache_file_name = "bb_codeparser.dat"
-    CACHE_VERSION = 3
-
-    def __init__(self):
-        MultiProcessCache.__init__(self)
-        self.pythoncache = self.cachedata[0]
-        self.shellcache = self.cachedata[1]
-        self.pythoncacheextras = self.cachedata_extras[0]
-        self.shellcacheextras = self.cachedata_extras[1]
-
-    def init_cache(self, d):
-        MultiProcessCache.init_cache(self, d)
-
-        # cachedata gets re-assigned in the parent
-        self.pythoncache = self.cachedata[0]
-        self.shellcache = self.cachedata[1]
-
-    def compress_keys(self, data):
-        # When the dicts are originally created, python calls intern() on the set keys
-        # which significantly improves memory usage. Sadly the pickle/unpickle process
-        # doesn't call intern() on the keys and results in the same strings being duplicated
-        # in memory. This also means pickle will save the same string multiple times in
-        # the cache file. By interning the data here, the cache file shrinks dramatically
-        # meaning faster load times and the reloaded cache files also consume much less
-        # memory. This is worth any performance hit from this loops and the use of the
-        # intern() data storage.
-        # Python 3.x may behave better in this area
-        for h in data[0]:
-            data[0][h]["refs"] = self.internSet(data[0][h]["refs"])
-            data[0][h]["execs"] = self.internSet(data[0][h]["execs"])
-        for h in data[1]:
-            data[1][h]["execs"] = self.internSet(data[1][h]["execs"])
-        return
-
-    def create_cachedata(self):
-        data = [{}, {}]
-        return data
-
-codeparsercache = CodeParserCache()
+def parser_cachefile(d):
+    cachedir = (bb.data.getVar("PERSISTENT_DIR", d, True) or
+                bb.data.getVar("CACHE", d, True))
+    if cachedir in [None, '']:
+        return None
+    bb.utils.mkdirhier(cachedir)
+    cachefile = os.path.join(cachedir, "bb_codeparser.dat")
+    logger.debug(1, "Using cache in '%s' for codeparser cache", cachefile)
+    return cachefile
 
 def parser_cache_init(d):
-    codeparsercache.init_cache(d)
+    global pythonparsecache
+    global shellparsecache
+
+    cachefile = parser_cachefile(d)
+    if not cachefile:
+        return
+
+    try:
+        p = pickle.Unpickler(file(cachefile, "rb"))
+        data, version = p.load()
+    except:
+        return
+
+    if version != PARSERCACHE_VERSION:
+        return
+
+    pythonparsecache = data[0]
+    shellparsecache = data[1]
 
 def parser_cache_save(d):
-    codeparsercache.save_extras(d)
+    cachefile = parser_cachefile(d)
+    if not cachefile:
+        return
 
-def parser_cache_savemerge(d):
-    codeparsercache.save_merge(d)
+    glf = bb.utils.lockfile(cachefile + ".lock", shared=True)
 
-Logger = logging.getLoggerClass()
-class BufferedLogger(Logger):
-    def __init__(self, name, level=0, target=None):
-        Logger.__init__(self, name)
-        self.setLevel(level)
-        self.buffer = []
-        self.target = target
+    i = os.getpid()
+    lf = None
+    while not lf:
+        shellcache = {}
+        pythoncache = {}
 
-    def handle(self, record):
-        self.buffer.append(record)
-
-    def flush(self):
-        for record in self.buffer:
-            self.target.handle(record)
-        self.buffer = []
-
-class PythonParser():
-    getvars = ("d.getVar", "bb.data.getVar", "data.getVar", "d.appendVar", "d.prependVar")
-    containsfuncs = ("bb.utils.contains", "base_contains", "oe.utils.contains")
-    execfuncs = ("bb.build.exec_func", "bb.build.exec_task")
-
-    def warn(self, func, arg):
-        """Warn about calls of bitbake APIs which pass a non-literal
-        argument for the variable name, as we're not able to track such
-        a reference.
-        """
+        lf = bb.utils.lockfile(cachefile + ".lock." + str(i), retry=False)
+        if not lf or os.path.exists(cachefile + "-" + str(i)):
+            if lf:
+               bb.utils.unlockfile(lf) 
+               lf = None
+            i = i + 1
+            continue
 
         try:
-            funcstr = codegen.to_source(func)
-            argstr = codegen.to_source(arg)
-        except TypeError:
-            self.log.debug(2, 'Failed to convert function and argument to source form')
+            p = pickle.Unpickler(file(cachefile, "rb"))
+            data, version = p.load()
+        except (IOError, EOFError, ValueError):
+            data, version = None, None
+
+        if version != PARSERCACHE_VERSION:
+            shellcache = shellparsecache
+            pythoncache = pythonparsecache
         else:
-            self.log.debug(1, self.unhandled_message % (funcstr, argstr))
+            for h in pythonparsecache:
+                if h not in data[0]:
+                    pythoncache[h] = pythonparsecache[h]
+            for h in shellparsecache:
+                if h not in data[1]:
+                    shellcache[h] = shellparsecache[h]
 
-    def visit_Call(self, node):
-        name = self.called_node_name(node.func)
-        if name in self.getvars or name in self.containsfuncs:
-            if isinstance(node.args[0], ast.Str):
-                self.var_references.add(node.args[0].s)
-            else:
-                self.warn(node.func, node.args[0])
-        elif name in self.execfuncs:
-            if isinstance(node.args[0], ast.Str):
-                self.var_execs.add(node.args[0].s)
-            else:
-                self.warn(node.func, node.args[0])
-        elif name and isinstance(node.func, (ast.Name, ast.Attribute)):
-            self.execs.add(name)
+        p = pickle.Pickler(file(cachefile + "-" + str(i), "wb"), -1)
+        p.dump([[pythoncache, shellcache], PARSERCACHE_VERSION])
 
-    def called_node_name(self, node):
-        """Given a called node, return its original string form"""
-        components = []
-        while node:
+    bb.utils.unlockfile(lf)
+    bb.utils.unlockfile(glf)
+
+def parser_cache_savemerge(d):
+    cachefile = parser_cachefile(d)
+    if not cachefile:
+        return
+
+    glf = bb.utils.lockfile(cachefile + ".lock")
+
+    try:
+        p = pickle.Unpickler(file(cachefile, "rb"))
+        data, version = p.load()
+    except (IOError, EOFError):
+        data, version = None, None
+
+    if version != PARSERCACHE_VERSION:
+        data = [{}, {}]
+
+    for f in [y for y in os.listdir(os.path.dirname(cachefile)) if y.startswith(os.path.basename(cachefile) + '-')]:
+        f = os.path.join(os.path.dirname(cachefile), f)
+        try:
+            p = pickle.Unpickler(file(f, "rb"))
+            extradata, version = p.load()
+        except (IOError, EOFError):
+            extradata, version = [{}, {}], None
+        
+        if version != PARSERCACHE_VERSION:
+            continue
+
+        for h in extradata[0]:
+            if h not in data[0]:
+                data[0][h] = extradata[0][h]
+        for h in extradata[1]:
+            if h not in data[1]:
+                data[1][h] = extradata[1][h]
+        os.unlink(f)
+
+    p = pickle.Pickler(file(cachefile, "wb"), -1)
+    p.dump([data, PARSERCACHE_VERSION])
+
+    bb.utils.unlockfile(glf)
+
+
+class PythonParser():
+    class ValueVisitor():
+        """Visitor to traverse a python abstract syntax tree and obtain
+        the variables referenced via bitbake metadata APIs, and the external
+        functions called.
+        """
+
+        getvars = ("d.getVar", "bb.data.getVar", "data.getVar")
+        expands = ("d.expand", "bb.data.expand", "data.expand")
+        execs = ("bb.build.exec_func", "bb.build.exec_task")
+
+        @classmethod
+        def _compare_name(cls, strparts, node):
+            """Given a sequence of strings representing a python name,
+            where the last component is the actual Name and the prior
+            elements are Attribute nodes, determine if the supplied node
+            matches.
+            """
+
+            if not strparts:
+                return True
+
+            current, rest = strparts[0], strparts[1:]
             if isinstance(node, ast.Attribute):
-                components.append(node.attr)
-                node = node.value
+                if current == node.attr:
+                    return cls._compare_name(rest, node.value)
             elif isinstance(node, ast.Name):
-                components.append(node.id)
-                return '.'.join(reversed(components))
+                if current == node.id:
+                    return True
+            return False
+
+        @classmethod
+        def compare_name(cls, value, node):
+            """Convenience function for the _compare_node method, which
+            can accept a string (which is split by '.' for you), or an
+            iterable of strings, in which case it checks to see if any of
+            them match, similar to isinstance.
+            """
+
+            if isinstance(value, basestring):
+                return cls._compare_name(tuple(reversed(value.split("."))),
+                                         node)
             else:
-                break
+                return any(cls.compare_name(item, node) for item in value)
 
-    def __init__(self, name, log):
-        self.var_references = set()
-        self.var_execs = set()
+        def __init__(self, value):
+            self.var_references = set()
+            self.var_execs = set()
+            self.direct_func_calls = set()
+            self.var_expands = set()
+            self.value = value
+
+        @classmethod
+        def warn(cls, func, arg):
+            """Warn about calls of bitbake APIs which pass a non-literal
+            argument for the variable name, as we're not able to track such
+            a reference.
+            """
+
+            try:
+                funcstr = codegen.to_source(func)
+                argstr = codegen.to_source(arg)
+            except TypeError:
+                logger.debug(2, 'Failed to convert function and argument to source form')
+            else:
+                logger.debug(1, "Warning: in call to '%s', argument '%s' is "
+                                "not a literal", funcstr, argstr)
+
+        def visit_Call(self, node):
+            if self.compare_name(self.getvars, node.func):
+                if isinstance(node.args[0], ast.Str):
+                    self.var_references.add(node.args[0].s)
+                else:
+                    self.warn(node.func, node.args[0])
+            elif self.compare_name(self.expands, node.func):
+                if isinstance(node.args[0], ast.Str):
+                    self.warn(node.func, node.args[0])
+                    self.var_expands.update(node.args[0].s)
+                elif isinstance(node.args[0], ast.Call) and \
+                     self.compare_name(self.getvars, node.args[0].func):
+                    pass
+                else:
+                    self.warn(node.func, node.args[0])
+            elif self.compare_name(self.execs, node.func):
+                if isinstance(node.args[0], ast.Str):
+                    self.var_execs.add(node.args[0].s)
+                else:
+                    self.warn(node.func, node.args[0])
+            elif isinstance(node.func, ast.Name):
+                self.direct_func_calls.add(node.func.id)
+            elif isinstance(node.func, ast.Attribute):
+                # We must have a qualified name.  Therefore we need
+                # to walk the chain of 'Attribute' nodes to determine
+                # the qualification.
+                attr_node = node.func.value
+                identifier = node.func.attr
+                while isinstance(attr_node, ast.Attribute):
+                    identifier = attr_node.attr + "." + identifier
+                    attr_node = attr_node.value
+                if isinstance(attr_node, ast.Name):
+                    identifier = attr_node.id + "." + identifier
+                self.direct_func_calls.add(identifier)
+
+    def __init__(self):
+        #self.funcdefs = set()
         self.execs = set()
+        #self.external_cmds = set()
         self.references = set()
-        self.log = BufferedLogger('BitBake.Data.%s' % name, logging.DEBUG, log)
-
-        self.unhandled_message = "in call of %s, argument '%s' is not a string literal"
-        self.unhandled_message = "while parsing %s, %s" % (name, self.unhandled_message)
 
     def parse_python(self, node):
+
         h = hash(str(node))
 
-        if h in codeparsercache.pythoncache:
-            self.references = codeparsercache.pythoncache[h]["refs"]
-            self.execs = codeparsercache.pythoncache[h]["execs"]
+        if h in pythonparsecache:
+            self.references = pythonparsecache[h]["refs"]
+            self.execs = pythonparsecache[h]["execs"]
             return
 
-        if h in codeparsercache.pythoncacheextras:
-            self.references = codeparsercache.pythoncacheextras[h]["refs"]
-            self.execs = codeparsercache.pythoncacheextras[h]["execs"]
-            return
-
-
         code = compile(check_indent(str(node)), "<string>", "exec",
                        ast.PyCF_ONLY_AST)
 
+        visitor = self.ValueVisitor(code)
         for n in ast.walk(code):
             if n.__class__.__name__ == "Call":
-                self.visit_Call(n)
+                visitor.visit_Call(n)
 
-        self.references.update(self.var_references)
-        self.references.update(self.var_execs)
+        self.references.update(visitor.var_references)
+        self.references.update(visitor.var_execs)
+        self.execs = visitor.direct_func_calls
 
-        codeparsercache.pythoncacheextras[h] = {}
-        codeparsercache.pythoncacheextras[h]["refs"] = self.references
-        codeparsercache.pythoncacheextras[h]["execs"] = self.execs
+        pythonparsecache[h] = {}
+        pythonparsecache[h]["refs"] = self.references
+        pythonparsecache[h]["execs"] = self.execs
 
 class ShellParser():
-    def __init__(self, name, log):
+    def __init__(self):
         self.funcdefs = set()
         self.allexecs = set()
         self.execs = set()
-        self.log = BufferedLogger('BitBake.Data.%s' % name, logging.DEBUG, log)
-        self.unhandled_template = "unable to handle non-literal command '%s'"
-        self.unhandled_template = "while parsing %s, %s" % (name, self.unhandled_template)
 
     def parse_shell(self, value):
         """Parse the supplied shell code in a string, returning the external
@@ -200,12 +297,8 @@ class ShellParser():
 
         h = hash(str(value))
 
-        if h in codeparsercache.shellcache:
-            self.execs = codeparsercache.shellcache[h]["execs"]
-            return self.execs
-
-        if h in codeparsercache.shellcacheextras:
-            self.execs = codeparsercache.shellcacheextras[h]["execs"]
+        if h in shellparsecache:
+            self.execs = shellparsecache[h]["execs"]
             return self.execs
 
         try:
@@ -217,8 +310,8 @@ class ShellParser():
             self.process_tokens(token)
         self.execs = set(cmd for cmd in self.allexecs if cmd not in self.funcdefs)
 
-        codeparsercache.shellcacheextras[h] = {}
-        codeparsercache.shellcacheextras[h]["execs"] = self.execs
+        shellparsecache[h] = {}
+        shellparsecache[h]["execs"] = self.execs
 
         return self.execs
 
@@ -310,7 +403,8 @@ class ShellParser():
 
                 cmd = word[1]
                 if cmd.startswith("$"):
-                    self.log.debug(1, self.unhandled_template % cmd)
+                    logger.debug(1, "Warning: execution of non-literal "
+                                    "command '%s'", cmd)
                 elif cmd == "eval":
                     command = " ".join(word for _, word in words[1:])
                     self.parse_shell(command)

bitbake/lib/bb/command.py

@@ -30,6 +30,11 @@ Commands are queued in a CommandQueue
 
 import bb.event
 import bb.cooker
+import bb.data
+
+async_cmds = {}
+sync_cmds = {}
+
 
 class CommandCompleted(bb.event.Event):
     pass
@@ -44,9 +49,6 @@ class CommandFailed(CommandExit):
         self.error = message
         CommandExit.__init__(self, 1)
 
-class CommandError(Exception):
-    pass
-
 class Command:
     """
     A queue of asynchronous commands for bitbake
@@ -59,27 +61,32 @@ class Command:
         # FIXME Add lock for this
         self.currentAsyncCommand = None
 
+        for attr in CommandsSync.__dict__:
+            command = attr[:].lower()
+            method = getattr(CommandsSync, attr)
+            sync_cmds[command] = (method)
+
+        for attr in CommandsAsync.__dict__:
+            command = attr[:].lower()
+            method = getattr(CommandsAsync, attr)
+            async_cmds[command] = (method)
+
     def runCommand(self, commandline):
-        command = commandline.pop(0)
-        if hasattr(CommandsSync, command):
-            # Can run synchronous commands straight away
-            command_method = getattr(self.cmds_sync, command)
-            try:
-                result = command_method(self, commandline)
-            except CommandError as exc:
-                return None, exc.args[0]
-            except Exception:
-                import traceback
-                return None, traceback.format_exc()
-            else:
-                return result, None
-        if self.currentAsyncCommand is not None:
-            return None, "Busy (%s in progress)" % self.currentAsyncCommand[0]
-        if command not in CommandsAsync.__dict__:
-            return None, "No such command"
-        self.currentAsyncCommand = (command, commandline)
-        self.cooker.server_registration_cb(self.cooker.runCommands, self.cooker)
-        return True, None
+        try:
+            command = commandline.pop(0)
+            if command in CommandsSync.__dict__:
+                # Can run synchronous commands straight away
+                return getattr(CommandsSync, command)(self.cmds_sync, self, commandline)
+            if self.currentAsyncCommand is not None:
+                return "Busy (%s in progress)" % self.currentAsyncCommand[0]
+            if command not in CommandsAsync.__dict__:
+                return "No such command"
+            self.currentAsyncCommand = (command, commandline)
+            self.cooker.server_registration_cb(self.cooker.runCommands, self.cooker)
+            return True
+        except:
+            import traceback
+            return traceback.format_exc()
 
     def runAsyncCommand(self):
         try:
@@ -106,12 +113,9 @@ class Command:
             else:
                 self.finishAsyncCommand("Exited with %s" % arg)
             return False
-        except Exception as exc:
+        except Exception:
             import traceback
-            if isinstance(exc, bb.BBHandledException):
-                self.finishAsyncCommand("")
-            else:
-                self.finishAsyncCommand(traceback.format_exc())
+            self.finishAsyncCommand(traceback.format_exc())
             return False
 
     def finishAsyncCommand(self, msg=None, code=None):
@@ -147,13 +151,7 @@ class CommandsSync:
         """
         Get any command parsed from the commandline
         """
-        cmd_action = command.cooker.commandlineAction
-        if cmd_action is None:
-            return None
-        elif 'msg' in cmd_action and cmd_action['msg']:
-            raise CommandError(cmd_action['msg'])
-        else:
-            return cmd_action['action']
+        return command.cooker.commandlineAction
 
     def getVariable(self, command, params):
         """
@@ -164,62 +162,16 @@ class CommandsSync:
         if len(params) > 1:
             expand = params[1]
 
-        return command.cooker.configuration.data.getVar(varname, expand)
+        return bb.data.getVar(varname, command.cooker.configuration.data, expand)
 
     def setVariable(self, command, params):
         """
         Set the value of variable in configuration.data
         """
         varname = params[0]
-        value = str(params[1])
-        command.cooker.configuration.data.setVar(varname, value)
+        value = params[1]
+        bb.data.setVar(varname, value, command.cooker.configuration.data)
 
-    def enableDataTracking(self, command, params):
-        """
-        Enable history tracking for variables
-        """
-        command.cooker.enableDataTracking()
-
-    def disableDataTracking(self, command, params):
-        """
-        Disable history tracking for variables
-        """
-        command.cooker.disableDataTracking()
-
-    def initCooker(self, command, params):
-        """
-        Init the cooker to initial state with nothing parsed
-        """
-        command.cooker.initialize()
-
-    def resetCooker(self, command, params):
-        """
-        Reset the cooker to its initial state, thus forcing a reparse for
-        any async command that has the needcache property set to True
-        """
-        command.cooker.reset()
-
-    def getCpuCount(self, command, params):
-        """
-        Get the CPU count on the bitbake server
-        """
-        return bb.utils.cpu_count()
-
-    def matchFile(self, command, params):
-        fMatch = params[0]
-        return command.cooker.matchFile(fMatch)
-
-    def generateNewImage(self, command, params):
-        image = params[0]
-        base_image = params[1]
-        package_queue = params[2]
-        return command.cooker.generateNewImage(image, base_image, package_queue)
-
-    def setVarFile(self, command, params):
-        var = params[0]
-        val = params[1]
-        default_file = params[2]
-        command.cooker.saveConfigurationVar(var, val, default_file)
 
 class CommandsAsync:
     """
@@ -279,23 +231,15 @@ class CommandsAsync:
         klass) rather than generating a tree for all packages.
         """
         klass = params[0]
-        pkg_list = params[1]
+        if len(params) > 1:
+            pkg_list = params[1]
+        else:
+            pkg_list = []
 
         command.cooker.generateTargetsTree(klass, pkg_list)
         command.finishAsyncCommand()
     generateTargetsTree.needcache = True
 
-    def findCoreBaseFiles(self, command, params):
-        """
-        Find certain files in COREBASE directory. i.e. Layers
-        """
-        subdir = params[0]
-        filename = params[1]
-
-        command.cooker.findCoreBaseFiles(subdir, filename)
-        command.finishAsyncCommand()
-    findCoreBaseFiles.needcache = False
-
     def findConfigFiles(self, command, params):
         """
         Find config files which provide appropriate values
@@ -305,7 +249,7 @@ class CommandsAsync:
 
         command.cooker.findConfigFiles(varname)
         command.finishAsyncCommand()
-    findConfigFiles.needcache = False
+    findConfigFiles.needcache = True
 
     def findFilesMatchingInDir(self, command, params):
         """
@@ -317,7 +261,7 @@ class CommandsAsync:
 
         command.cooker.findFilesMatchingInDir(pattern, directory)
         command.finishAsyncCommand()
-    findFilesMatchingInDir.needcache = False
+    findFilesMatchingInDir.needcache = True
 
     def findConfigFilePath(self, command, params):
         """
@@ -384,23 +328,3 @@ class CommandsAsync:
         else:
             command.finishAsyncCommand()
     compareRevisions.needcache = True
-
-    def parseConfigurationFiles(self, command, params):
-        """
-        Parse the configuration files
-        """
-        prefiles = params[0]
-        postfiles = params[1]
-        command.cooker.parseConfigurationFiles(prefiles, postfiles)
-        command.finishAsyncCommand()
-    parseConfigurationFiles.needcache = False
-
-    def triggerEvent(self, command, params):
-        """
-        Trigger a certain event
-        """
-        event = params[0]
-        bb.event.fire(eval(event), command.cooker.configuration.data)
-        command.currentAsyncCommand = None
-    triggerEvent.needcache = False
-

bitbake/lib/bb/compat.py

@@ -1,11 +1,5 @@
 """Code pulled from future python versions, here for compatibility"""
 
-from collections import MutableMapping, KeysView, ValuesView, ItemsView
-try:
-    from thread import get_ident as _get_ident
-except ImportError:
-    from dummy_thread import get_ident as _get_ident
-
 def total_ordering(cls):
     """Class decorator that fills in missing ordering methods"""
     convert = {
@@ -32,897 +26,3 @@ def total_ordering(cls):
             opfunc.__doc__ = getattr(int, opname).__doc__
             setattr(cls, opname, opfunc)
     return cls
-
-class OrderedDict(dict):
-    'Dictionary that remembers insertion order'
-    # An inherited dict maps keys to values.
-    # The inherited dict provides __getitem__, __len__, __contains__, and get.
-    # The remaining methods are order-aware.
-    # Big-O running times for all methods are the same as regular dictionaries.
-
-    # The internal self.__map dict maps keys to links in a doubly linked list.
-    # The circular doubly linked list starts and ends with a sentinel element.
-    # The sentinel element never gets deleted (this simplifies the algorithm).
-    # Each link is stored as a list of length three:  [PREV, NEXT, KEY].
-
-    def __init__(self, *args, **kwds):
-        '''Initialize an ordered dictionary.  The signature is the same as
-        regular dictionaries, but keyword arguments are not recommended because
-        their insertion order is arbitrary.
-
-        '''
-        if len(args) > 1:
-            raise TypeError('expected at most 1 arguments, got %d' % len(args))
-        try:
-            self.__root
-        except AttributeError:
-            self.__root = root = []                     # sentinel node
-            root[:] = [root, root, None]
-            self.__map = {}
-        self.__update(*args, **kwds)
-
-    def __setitem__(self, key, value, PREV=0, NEXT=1, dict_setitem=dict.__setitem__):
-        'od.__setitem__(i, y) <==> od[i]=y'
-        # Setting a new item creates a new link at the end of the linked list,
-        # and the inherited dictionary is updated with the new key/value pair.
-        if key not in self:
-            root = self.__root
-            last = root[PREV]
-            last[NEXT] = root[PREV] = self.__map[key] = [last, root, key]
-        dict_setitem(self, key, value)
-
-    def __delitem__(self, key, PREV=0, NEXT=1, dict_delitem=dict.__delitem__):
-        'od.__delitem__(y) <==> del od[y]'
-        # Deleting an existing item uses self.__map to find the link which gets
-        # removed by updating the links in the predecessor and successor nodes.
-        dict_delitem(self, key)
-        link_prev, link_next, key = self.__map.pop(key)
-        link_prev[NEXT] = link_next
-        link_next[PREV] = link_prev
-
-    def __iter__(self):
-        'od.__iter__() <==> iter(od)'
-        # Traverse the linked list in order.
-        NEXT, KEY = 1, 2
-        root = self.__root
-        curr = root[NEXT]
-        while curr is not root:
-            yield curr[KEY]
-            curr = curr[NEXT]
-
-    def __reversed__(self):
-        'od.__reversed__() <==> reversed(od)'
-        # Traverse the linked list in reverse order.
-        PREV, KEY = 0, 2
-        root = self.__root
-        curr = root[PREV]
-        while curr is not root:
-            yield curr[KEY]
-            curr = curr[PREV]
-
-    def clear(self):
-        'od.clear() -> None.  Remove all items from od.'
-        for node in self.__map.itervalues():
-            del node[:]
-        root = self.__root
-        root[:] = [root, root, None]
-        self.__map.clear()
-        dict.clear(self)
-
-    # -- the following methods do not depend on the internal structure --
-
-    def keys(self):
-        'od.keys() -> list of keys in od'
-        return list(self)
-
-    def values(self):
-        'od.values() -> list of values in od'
-        return [self[key] for key in self]
-
-    def items(self):
-        'od.items() -> list of (key, value) pairs in od'
-        return [(key, self[key]) for key in self]
-
-    def iterkeys(self):
-        'od.iterkeys() -> an iterator over the keys in od'
-        return iter(self)
-
-    def itervalues(self):
-        'od.itervalues -> an iterator over the values in od'
-        for k in self:
-            yield self[k]
-
-    def iteritems(self):
-        'od.iteritems -> an iterator over the (key, value) pairs in od'
-        for k in self:
-            yield (k, self[k])
-
-    update = MutableMapping.update
-
-    __update = update # let subclasses override update without breaking __init__
-
-    __marker = object()
-
-    def pop(self, key, default=__marker):
-        '''od.pop(k[,d]) -> v, remove specified key and return the corresponding
-        value.  If key is not found, d is returned if given, otherwise KeyError
-        is raised.
-
-        '''
-        if key in self:
-            result = self[key]
-            del self[key]
-            return result
-        if default is self.__marker:
-            raise KeyError(key)
-        return default
-
-    def setdefault(self, key, default=None):
-        'od.setdefault(k[,d]) -> od.get(k,d), also set od[k]=d if k not in od'
-        if key in self:
-            return self[key]
-        self[key] = default
-        return default
-
-    def popitem(self, last=True):
-        '''od.popitem() -> (k, v), return and remove a (key, value) pair.
-        Pairs are returned in LIFO order if last is true or FIFO order if false.
-
-        '''
-        if not self:
-            raise KeyError('dictionary is empty')
-        key = next(reversed(self) if last else iter(self))
-        value = self.pop(key)
-        return key, value
-
-    def __repr__(self, _repr_running={}):
-        'od.__repr__() <==> repr(od)'
-        call_key = id(self), _get_ident()
-        if call_key in _repr_running:
-            return '...'
-        _repr_running[call_key] = 1
-        try:
-            if not self:
-                return '%s()' % (self.__class__.__name__,)
-            return '%s(%r)' % (self.__class__.__name__, self.items())
-        finally:
-            del _repr_running[call_key]
-
-    def __reduce__(self):
-        'Return state information for pickling'
-        items = [[k, self[k]] for k in self]
-        inst_dict = vars(self).copy()
-        for k in vars(OrderedDict()):
-            inst_dict.pop(k, None)
-        if inst_dict:
-            return (self.__class__, (items,), inst_dict)
-        return self.__class__, (items,)
-
-    def copy(self):
-        'od.copy() -> a shallow copy of od'
-        return self.__class__(self)
-
-    @classmethod
-    def fromkeys(cls, iterable, value=None):
-        '''OD.fromkeys(S[, v]) -> New ordered dictionary with keys from S.
-        If not specified, the value defaults to None.
-
-        '''
-        self = cls()
-        for key in iterable:
-            self[key] = value
-        return self
-
-    def __eq__(self, other):
-        '''od.__eq__(y) <==> od==y.  Comparison to another OD is order-sensitive
-        while comparison to a regular mapping is order-insensitive.
-
-        '''
-        if isinstance(other, OrderedDict):
-            return len(self)==len(other) and self.items() == other.items()
-        return dict.__eq__(self, other)
-
-    def __ne__(self, other):
-        'od.__ne__(y) <==> od!=y'
-        return not self == other
-
-    # -- the following methods support python 3.x style dictionary views --
-
-    def viewkeys(self):
-        "od.viewkeys() -> a set-like object providing a view on od's keys"
-        return KeysView(self)
-
-    def viewvalues(self):
-        "od.viewvalues() -> an object providing a view on od's values"
-        return ValuesView(self)
-
-    def viewitems(self):
-        "od.viewitems() -> a set-like object providing a view on od's items"
-        return ItemsView(self)
-
-# Multiprocessing pool code imported from python 2.7.3. Previous versions of 
-# python have issues in this code which hang pool usage
-
-#
-# Module providing the `Pool` class for managing a process pool
-#
-# multiprocessing/pool.py
-#
-# Copyright (c) 2006-2008, R Oudkerk
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in the
-#    documentation and/or other materials provided with the distribution.
-# 3. Neither the name of author nor the names of any contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-# SUCH DAMAGE.
-#
-import threading
-import Queue
-import itertools
-import collections
-import time
-
-import multiprocessing
-from multiprocessing import Process, cpu_count, TimeoutError, pool
-from multiprocessing.util import Finalize, debug
-
-#
-# Constants representing the state of a pool
-#
-
-RUN = 0
-CLOSE = 1
-TERMINATE = 2
-
-#
-# Miscellaneous
-#
-
-def mapstar(args):
-    return map(*args)
-
-class MaybeEncodingError(Exception):
-    """Wraps possible unpickleable errors, so they can be
-    safely sent through the socket."""
-
-    def __init__(self, exc, value):
-        self.exc = repr(exc)
-        self.value = repr(value)
-        super(MaybeEncodingError, self).__init__(self.exc, self.value)
-
-    def __str__(self):
-        return "Error sending result: '%s'. Reason: '%s'" % (self.value,
-                                                             self.exc)
-
-    def __repr__(self):
-        return "<MaybeEncodingError: %s>" % str(self)
-
-def worker(inqueue, outqueue, initializer=None, initargs=(), maxtasks=None):
-    assert maxtasks is None or (type(maxtasks) == int and maxtasks > 0)
-    put = outqueue.put
-    get = inqueue.get
-    if hasattr(inqueue, '_writer'):
-        inqueue._writer.close()
-        outqueue._reader.close()
-
-    if initializer is not None:
-        initializer(*initargs)
-
-    completed = 0
-    while maxtasks is None or (maxtasks and completed < maxtasks):
-        try:
-            task = get()
-        except (EOFError, IOError):
-            debug('worker got EOFError or IOError -- exiting')
-            break
-
-        if task is None:
-            debug('worker got sentinel -- exiting')
-            break
-
-        job, i, func, args, kwds = task
-        try:
-            result = (True, func(*args, **kwds))
-        except Exception, e:
-            result = (False, e)
-        try:
-            put((job, i, result))
-        except Exception as e:
-            wrapped = MaybeEncodingError(e, result[1])
-            debug("Possible encoding error while sending result: %s" % (
-                wrapped))
-            put((job, i, (False, wrapped)))
-        completed += 1
-    debug('worker exiting after %d tasks' % completed)
-
-
-class Pool(object):
-    '''
-    Class which supports an async version of the `apply()` builtin
-    '''
-    Process = Process
-
-    def __init__(self, processes=None, initializer=None, initargs=(),
-                 maxtasksperchild=None):
-        self._setup_queues()
-        self._taskqueue = Queue.Queue()
-        self._cache = {}
-        self._state = RUN
-        self._maxtasksperchild = maxtasksperchild
-        self._initializer = initializer
-        self._initargs = initargs
-
-        if processes is None:
-            try:
-                processes = cpu_count()
-            except NotImplementedError:
-                processes = 1
-        if processes < 1:
-            raise ValueError("Number of processes must be at least 1")
-
-        if initializer is not None and not hasattr(initializer, '__call__'):
-            raise TypeError('initializer must be a callable')
-
-        self._processes = processes
-        self._pool = []
-        self._repopulate_pool()
-
-        self._worker_handler = threading.Thread(
-            target=Pool._handle_workers,
-            args=(self, )
-            )
-        self._worker_handler.daemon = True
-        self._worker_handler._state = RUN
-        self._worker_handler.start()
-
-
-        self._task_handler = threading.Thread(
-            target=Pool._handle_tasks,
-            args=(self._taskqueue, self._quick_put, self._outqueue, self._pool)
-            )
-        self._task_handler.daemon = True
-        self._task_handler._state = RUN
-        self._task_handler.start()
-
-        self._result_handler = threading.Thread(
-            target=Pool._handle_results,
-            args=(self._outqueue, self._quick_get, self._cache)
-            )
-        self._result_handler.daemon = True
-        self._result_handler._state = RUN
-        self._result_handler.start()
-
-        self._terminate = Finalize(
-            self, self._terminate_pool,
-            args=(self._taskqueue, self._inqueue, self._outqueue, self._pool,
-                  self._worker_handler, self._task_handler,
-                  self._result_handler, self._cache),
-            exitpriority=15
-            )
-
-    def _join_exited_workers(self):
-        """Cleanup after any worker processes which have exited due to reaching
-        their specified lifetime.  Returns True if any workers were cleaned up.
-        """
-        cleaned = False
-        for i in reversed(range(len(self._pool))):
-            worker = self._pool[i]
-            if worker.exitcode is not None:
-                # worker exited
-                debug('cleaning up worker %d' % i)
-                worker.join()
-                cleaned = True
-                del self._pool[i]
-        return cleaned
-
-    def _repopulate_pool(self):
-        """Bring the number of pool processes up to the specified number,
-        for use after reaping workers which have exited.
-        """
-        for i in range(self._processes - len(self._pool)):
-            w = self.Process(target=worker,
-                             args=(self._inqueue, self._outqueue,
-                                   self._initializer,
-                                   self._initargs, self._maxtasksperchild)
-                            )
-            self._pool.append(w)
-            w.name = w.name.replace('Process', 'PoolWorker')
-            w.daemon = True
-            w.start()
-            debug('added worker')
-
-    def _maintain_pool(self):
-        """Clean up any exited workers and start replacements for them.
-        """
-        if self._join_exited_workers():
-            self._repopulate_pool()
-
-    def _setup_queues(self):
-        from multiprocessing.queues import SimpleQueue
-        self._inqueue = SimpleQueue()
-        self._outqueue = SimpleQueue()
-        self._quick_put = self._inqueue._writer.send
-        self._quick_get = self._outqueue._reader.recv
-
-    def apply(self, func, args=(), kwds={}):
-        '''
-        Equivalent of `apply()` builtin
-        '''
-        assert self._state == RUN
-        return self.apply_async(func, args, kwds).get()
-
-    def map(self, func, iterable, chunksize=None):
-        '''
-        Equivalent of `map()` builtin
-        '''
-        assert self._state == RUN
-        return self.map_async(func, iterable, chunksize).get()
-
-    def imap(self, func, iterable, chunksize=1):
-        '''
-        Equivalent of `itertools.imap()` -- can be MUCH slower than `Pool.map()`
-        '''
-        assert self._state == RUN
-        if chunksize == 1:
-            result = IMapIterator(self._cache)
-            self._taskqueue.put((((result._job, i, func, (x,), {})
-                         for i, x in enumerate(iterable)), result._set_length))
-            return result
-        else:
-            assert chunksize > 1
-            task_batches = Pool._get_tasks(func, iterable, chunksize)
-            result = IMapIterator(self._cache)
-            self._taskqueue.put((((result._job, i, mapstar, (x,), {})
-                     for i, x in enumerate(task_batches)), result._set_length))
-            return (item for chunk in result for item in chunk)
-
-    def imap_unordered(self, func, iterable, chunksize=1):
-        '''
-        Like `imap()` method but ordering of results is arbitrary
-        '''
-        assert self._state == RUN
-        if chunksize == 1:
-            result = IMapUnorderedIterator(self._cache)
-            self._taskqueue.put((((result._job, i, func, (x,), {})
-                         for i, x in enumerate(iterable)), result._set_length))
-            return result
-        else:
-            assert chunksize > 1
-            task_batches = Pool._get_tasks(func, iterable, chunksize)
-            result = IMapUnorderedIterator(self._cache)
-            self._taskqueue.put((((result._job, i, mapstar, (x,), {})
-                     for i, x in enumerate(task_batches)), result._set_length))
-            return (item for chunk in result for item in chunk)
-
-    def apply_async(self, func, args=(), kwds={}, callback=None):
-        '''
-        Asynchronous equivalent of `apply()` builtin
-        '''
-        assert self._state == RUN
-        result = ApplyResult(self._cache, callback)
-        self._taskqueue.put(([(result._job, None, func, args, kwds)], None))
-        return result
-
-    def map_async(self, func, iterable, chunksize=None, callback=None):
-        '''
-        Asynchronous equivalent of `map()` builtin
-        '''
-        assert self._state == RUN
-        if not hasattr(iterable, '__len__'):
-            iterable = list(iterable)
-
-        if chunksize is None:
-            chunksize, extra = divmod(len(iterable), len(self._pool) * 4)
-            if extra:
-                chunksize += 1
-        if len(iterable) == 0:
-            chunksize = 0
-
-        task_batches = Pool._get_tasks(func, iterable, chunksize)
-        result = MapResult(self._cache, chunksize, len(iterable), callback)
-        self._taskqueue.put((((result._job, i, mapstar, (x,), {})
-                              for i, x in enumerate(task_batches)), None))
-        return result
-
-    @staticmethod
-    def _handle_workers(pool):
-        thread = threading.current_thread()
-
-        # Keep maintaining workers until the cache gets drained, unless the pool
-        # is terminated.
-        while thread._state == RUN or (pool._cache and thread._state != TERMINATE):
-            pool._maintain_pool()
-            time.sleep(0.1)
-        # send sentinel to stop workers
-        pool._taskqueue.put(None)
-        debug('worker handler exiting')
-
-    @staticmethod
-    def _handle_tasks(taskqueue, put, outqueue, pool):
-        thread = threading.current_thread()
-
-        for taskseq, set_length in iter(taskqueue.get, None):
-            i = -1
-            for i, task in enumerate(taskseq):
-                if thread._state:
-                    debug('task handler found thread._state != RUN')
-                    break
-                try:
-                    put(task)
-                except IOError:
-                    debug('could not put task on queue')
-                    break
-            else:
-                if set_length:
-                    debug('doing set_length()')
-                    set_length(i+1)
-                continue
-            break
-        else:
-            debug('task handler got sentinel')
-
-
-        try:
-            # tell result handler to finish when cache is empty
-            debug('task handler sending sentinel to result handler')
-            outqueue.put(None)
-
-            # tell workers there is no more work
-            debug('task handler sending sentinel to workers')
-            for p in pool:
-                put(None)
-        except IOError:
-            debug('task handler got IOError when sending sentinels')
-
-        debug('task handler exiting')
-
-    @staticmethod
-    def _handle_results(outqueue, get, cache):
-        thread = threading.current_thread()
-
-        while 1:
-            try:
-                task = get()
-            except (IOError, EOFError):
-                debug('result handler got EOFError/IOError -- exiting')
-                return
-
-            if thread._state:
-                assert thread._state == TERMINATE
-                debug('result handler found thread._state=TERMINATE')
-                break
-
-            if task is None:
-                debug('result handler got sentinel')
-                break
-
-            job, i, obj = task
-            try:
-                cache[job]._set(i, obj)
-            except KeyError:
-                pass
-
-        while cache and thread._state != TERMINATE:
-            try:
-                task = get()
-            except (IOError, EOFError):
-                debug('result handler got EOFError/IOError -- exiting')
-                return
-
-            if task is None:
-                debug('result handler ignoring extra sentinel')
-                continue
-            job, i, obj = task
-            try:
-                cache[job]._set(i, obj)
-            except KeyError:
-                pass
-
-        if hasattr(outqueue, '_reader'):
-            debug('ensuring that outqueue is not full')
-            # If we don't make room available in outqueue then
-            # attempts to add the sentinel (None) to outqueue may
-            # block.  There is guaranteed to be no more than 2 sentinels.
-            try:
-                for i in range(10):
-                    if not outqueue._reader.poll():
-                        break
-                    get()
-            except (IOError, EOFError):
-                pass
-
-        debug('result handler exiting: len(cache)=%s, thread._state=%s',
-              len(cache), thread._state)
-
-    @staticmethod
-    def _get_tasks(func, it, size):
-        it = iter(it)
-        while 1:
-            x = tuple(itertools.islice(it, size))
-            if not x:
-                return
-            yield (func, x)
-
-    def __reduce__(self):
-        raise NotImplementedError(
-              'pool objects cannot be passed between processes or pickled'
-              )
-
-    def close(self):
-        debug('closing pool')
-        if self._state == RUN:
-            self._state = CLOSE
-            self._worker_handler._state = CLOSE
-
-    def terminate(self):
-        debug('terminating pool')
-        self._state = TERMINATE
-        self._worker_handler._state = TERMINATE
-        self._terminate()
-
-    def join(self):
-        debug('joining pool')
-        assert self._state in (CLOSE, TERMINATE)
-        self._worker_handler.join()
-        self._task_handler.join()
-        self._result_handler.join()
-        for p in self._pool:
-            p.join()
-
-    @staticmethod
-    def _help_stuff_finish(inqueue, task_handler, size):
-        # task_handler may be blocked trying to put items on inqueue
-        debug('removing tasks from inqueue until task handler finished')
-        inqueue._rlock.acquire()
-        while task_handler.is_alive() and inqueue._reader.poll():
-            inqueue._reader.recv()
-            time.sleep(0)
-
-    @classmethod
-    def _terminate_pool(cls, taskqueue, inqueue, outqueue, pool,
-                        worker_handler, task_handler, result_handler, cache):
-        # this is guaranteed to only be called once
-        debug('finalizing pool')
-
-        worker_handler._state = TERMINATE
-        task_handler._state = TERMINATE
-
-        debug('helping task handler/workers to finish')
-        cls._help_stuff_finish(inqueue, task_handler, len(pool))
-
-        assert result_handler.is_alive() or len(cache) == 0
-
-        result_handler._state = TERMINATE
-        outqueue.put(None)                  # sentinel
-
-        # We must wait for the worker handler to exit before terminating
-        # workers because we don't want workers to be restarted behind our back.
-        debug('joining worker handler')
-        if threading.current_thread() is not worker_handler:
-            worker_handler.join(1e100)
-
-        # Terminate workers which haven't already finished.
-        if pool and hasattr(pool[0], 'terminate'):
-            debug('terminating workers')
-            for p in pool:
-                if p.exitcode is None:
-                    p.terminate()
-
-        debug('joining task handler')
-        if threading.current_thread() is not task_handler:
-            task_handler.join(1e100)
-
-        debug('joining result handler')
-        if threading.current_thread() is not result_handler:
-            result_handler.join(1e100)
-
-        if pool and hasattr(pool[0], 'terminate'):
-            debug('joining pool workers')
-            for p in pool:
-                if p.is_alive():
-                    # worker has not yet exited
-                    debug('cleaning up worker %d' % p.pid)
-                    p.join()
-
-class ApplyResult(object):
-
-    def __init__(self, cache, callback):
-        self._cond = threading.Condition(threading.Lock())
-        self._job = multiprocessing.pool.job_counter.next()
-        self._cache = cache
-        self._ready = False
-        self._callback = callback
-        cache[self._job] = self
-
-    def ready(self):
-        return self._ready
-
-    def successful(self):
-        assert self._ready
-        return self._success
-
-    def wait(self, timeout=None):
-        self._cond.acquire()
-        try:
-            if not self._ready:
-                self._cond.wait(timeout)
-        finally:
-            self._cond.release()
-
-    def get(self, timeout=None):
-        self.wait(timeout)
-        if not self._ready:
-            raise TimeoutError
-        if self._success:
-            return self._value
-        else:
-            raise self._value
-
-    def _set(self, i, obj):
-        self._success, self._value = obj
-        if self._callback and self._success:
-            self._callback(self._value)
-        self._cond.acquire()
-        try:
-            self._ready = True
-            self._cond.notify()
-        finally:
-            self._cond.release()
-        del self._cache[self._job]
-
-#
-# Class whose instances are returned by `Pool.map_async()`
-#
-
-class MapResult(ApplyResult):
-
-    def __init__(self, cache, chunksize, length, callback):
-        ApplyResult.__init__(self, cache, callback)
-        self._success = True
-        self._value = [None] * length
-        self._chunksize = chunksize
-        if chunksize <= 0:
-            self._number_left = 0
-            self._ready = True
-            del cache[self._job]
-        else:
-            self._number_left = length//chunksize + bool(length % chunksize)
-
-    def _set(self, i, success_result):
-        success, result = success_result
-        if success:
-            self._value[i*self._chunksize:(i+1)*self._chunksize] = result
-            self._number_left -= 1
-            if self._number_left == 0:
-                if self._callback:
-                    self._callback(self._value)
-                del self._cache[self._job]
-                self._cond.acquire()
-                try:
-                    self._ready = True
-                    self._cond.notify()
-                finally:
-                    self._cond.release()
-
-        else:
-            self._success = False
-            self._value = result
-            del self._cache[self._job]
-            self._cond.acquire()
-            try:
-                self._ready = True
-                self._cond.notify()
-            finally:
-                self._cond.release()
-
-#
-# Class whose instances are returned by `Pool.imap()`
-#
-
-class IMapIterator(object):
-
-    def __init__(self, cache):
-        self._cond = threading.Condition(threading.Lock())
-        self._job = multiprocessing.pool.job_counter.next()
-        self._cache = cache
-        self._items = collections.deque()
-        self._index = 0
-        self._length = None
-        self._unsorted = {}
-        cache[self._job] = self
-
-    def __iter__(self):
-        return self
-
-    def next(self, timeout=None):
-        self._cond.acquire()
-        try:
-            try:
-                item = self._items.popleft()
-            except IndexError:
-                if self._index == self._length:
-                    raise StopIteration
-                self._cond.wait(timeout)
-                try:
-                    item = self._items.popleft()
-                except IndexError:
-                    if self._index == self._length:
-                        raise StopIteration
-                    raise TimeoutError
-        finally:
-            self._cond.release()
-
-        success, value = item
-        if success:
-            return value
-        raise value
-
-    __next__ = next                    # XXX
-
-    def _set(self, i, obj):
-        self._cond.acquire()
-        try:
-            if self._index == i:
-                self._items.append(obj)
-                self._index += 1
-                while self._index in self._unsorted:
-                    obj = self._unsorted.pop(self._index)
-                    self._items.append(obj)
-                    self._index += 1
-                self._cond.notify()
-            else:
-                self._unsorted[i] = obj
-
-            if self._index == self._length:
-                del self._cache[self._job]
-        finally:
-            self._cond.release()
-
-    def _set_length(self, length):
-        self._cond.acquire()
-        try:
-            self._length = length
-            if self._index == self._length:
-                self._cond.notify()
-                del self._cache[self._job]
-        finally:
-            self._cond.release()
-
-#
-# Class whose instances are returned by `Pool.imap_unordered()`
-#
-
-class IMapUnorderedIterator(IMapIterator):
-
-    def _set(self, i, obj):
-        self._cond.acquire()
-        try:
-            self._items.append(obj)
-            self._index += 1
-            self._cond.notify()
-            if self._index == self._length:
-                del self._cache[self._job]
-        finally:
-            self._cond.release()
-
-

bitbake/lib/bb/data.py

@@ -49,7 +49,6 @@ from bb import data_smart
 from bb import codeparser
 import bb
 
-logger = data_smart.logger
 _dict_type = data_smart.DataSmart
 
 def init():
@@ -158,24 +157,18 @@ def expandKeys(alterdata, readdata = None):
 
     for key in todolist:
         ekey = todolist[key]
-        newval = alterdata.getVar(ekey, 0)
-        if newval:
-            val = alterdata.getVar(key, 0)
-            if val is not None and newval is not None:
-                bb.warn("Variable key %s (%s) replaces original key %s (%s)." % (key, val, ekey, newval))
-        alterdata.renameVar(key, ekey)
+        renameVar(key, ekey, alterdata)
 
-def inheritFromOS(d, savedenv, permitted):
+def inheritFromOS(d, savedenv):
     """Inherit variables from the initial environment."""
     exportlist = bb.utils.preserved_envvars_exported()
     for s in savedenv.keys():
-        if s in permitted:
-            try:
-                d.setVar(s, getVar(s, savedenv, True), op = 'from env')
-                if s in exportlist:
-                    d.setVarFlag(s, "export", True, op = 'auto env export')
-            except TypeError:
-                pass
+        try:
+            setVar(s, getVar(s, savedenv, True), d)
+            if s in exportlist:
+                setVarFlag(s, "export", True, d)
+        except TypeError:
+            pass
 
 def emit_var(var, o=sys.__stdout__, d = init(), all=False):
     """Emit a variable to be sourced by a shell."""
@@ -199,7 +192,8 @@ def emit_var(var, o=sys.__stdout__, d = init(), all=False):
         return 0
 
     if all:
-        d.varhistory.emit(var, oval, val, o)
+        commentVal = re.sub('\n', '\n#', str(oval))
+        o.write('# %s=%s\n' % (var, commentVal))
 
     if (var.find("-") != -1 or var.find(".") != -1 or var.find('{') != -1 or var.find('}') != -1 or var.find('+') != -1) and not all:
         return 0
@@ -263,74 +257,48 @@ def emit_func(func, o=sys.__stdout__, d = init()):
         emit_var(key, o, d, False) and o.write('\n')
 
     emit_var(func, o, d, False) and o.write('\n')
-    newdeps = bb.codeparser.ShellParser(func, logger).parse_shell(d.getVar(func, True))
-    newdeps |= set((d.getVarFlag(func, "vardeps", True) or "").split())
+    newdeps = bb.codeparser.ShellParser().parse_shell(d.getVar(func, True))
     seen = set()
     while newdeps:
         deps = newdeps
         seen |= deps
         newdeps = set()
         for dep in deps:
-            if d.getVarFlag(dep, "func"):
+            if bb.data.getVarFlag(dep, "func", d):
                emit_var(dep, o, d, False) and o.write('\n')
-               newdeps |=  bb.codeparser.ShellParser(dep, logger).parse_shell(d.getVar(dep, True))
+               newdeps |=  bb.codeparser.ShellParser().parse_shell(d.getVar(dep, True))
         newdeps -= seen
 
 def update_data(d):
     """Performs final steps upon the datastore, including application of overrides"""
-    d.finalize(parent = True)
+    d.finalize()
 
-def build_dependencies(key, keys, shelldeps, vardepvals, d):
+def build_dependencies(key, keys, shelldeps, d):
     deps = set()
-    vardeps = d.getVarFlag(key, "vardeps", True)
     try:
-        if key[-1] == ']':
-            vf = key[:-1].split('[')
-            value = d.getVarFlag(vf[0], vf[1], False)
-        else:
-            value = d.getVar(key, False)
-
-        if key in vardepvals:
-           value =  d.getVarFlag(key, "vardepvalue", True)
-        elif d.getVarFlag(key, "func"):
+        if d.getVarFlag(key, "func"):
             if d.getVarFlag(key, "python"):
-                parsedvar = d.expandWithRefs(value, key)
-                parser = bb.codeparser.PythonParser(key, logger)
-                if parsedvar.value and "\t" in parsedvar.value:
-                    logger.warn("Variable %s contains tabs, please remove these (%s)" % (key, d.getVar("FILE", True)))
+                parsedvar = d.expandWithRefs(d.getVar(key, False), key)
+                parser = bb.codeparser.PythonParser()
                 parser.parse_python(parsedvar.value)
                 deps = deps | parser.references
             else:
-                parsedvar = d.expandWithRefs(value, key)
-                parser = bb.codeparser.ShellParser(key, logger)
+                parsedvar = d.expandWithRefs(d.getVar(key, False), key)
+                parser = bb.codeparser.ShellParser()
                 parser.parse_shell(parsedvar.value)
                 deps = deps | shelldeps
-            if vardeps is None:
-                parser.log.flush()
             deps = deps | parsedvar.references
             deps = deps | (keys & parser.execs) | (keys & parsedvar.execs)
         else:
-            parser = d.expandWithRefs(value, key)
+            parser = d.expandWithRefs(d.getVar(key, False), key)
             deps |= parser.references
             deps = deps | (keys & parser.execs)
-
-        # Add varflags, assuming an exclusion list is set
-        varflagsexcl = d.getVar('BB_SIGNATURE_EXCLUDE_FLAGS', True)
-        if varflagsexcl:
-            varfdeps = []
-            varflags = d.getVarFlags(key)
-            if varflags:
-                for f in varflags:
-                    if f not in varflagsexcl:
-                        varfdeps.append('%s[%s]' % (key, f))
-            if varfdeps:
-                deps |= set(varfdeps)
-
-        deps |= set((vardeps or "").split())
+        deps |= set((d.getVarFlag(key, "vardeps", True) or "").split())
         deps -= set((d.getVarFlag(key, "vardepsexclude", True) or "").split())
-    except Exception as e:
-        raise bb.data_smart.ExpansionError(key, None, e)
-    return deps, value
+    except:
+        bb.note("Error expanding variable %s" % key)
+        raise
+    return deps
     #bb.note("Variable %s references %s and calls %s" % (key, str(deps), str(execs)))
     #d.setVarFlag(key, "vardeps", deps)
 
@@ -338,14 +306,12 @@ def generate_dependencies(d):
 
     keys = set(key for key in d.keys() if not key.startswith("__"))
     shelldeps = set(key for key in keys if d.getVarFlag(key, "export") and not d.getVarFlag(key, "unexport"))
-    vardepvals = set(key for key in keys if d.getVarFlag(key, "vardepvalue"))
 
     deps = {}
-    values = {}
 
-    tasklist = d.getVar('__BBTASKS') or []
+    tasklist = bb.data.getVar('__BBTASKS', d) or []
     for task in tasklist:
-        deps[task], values[task] = build_dependencies(task, keys, shelldeps, vardepvals, d)
+        deps[task] = build_dependencies(task, keys, shelldeps, d)
         newdeps = deps[task]
         seen = set()
         while newdeps:
@@ -354,16 +320,14 @@ def generate_dependencies(d):
             newdeps = set()
             for dep in nextdeps:
                 if dep not in deps:
-                    deps[dep], values[dep] = build_dependencies(dep, keys, shelldeps, vardepvals, d)
+                    deps[dep] = build_dependencies(dep, keys, shelldeps, d)
                 newdeps |=  deps[dep]
             newdeps -= seen
-        #print "For %s: %s" % (task, str(deps[task]))
-    return tasklist, deps, values
+        #print "For %s: %s" % (task, str(taskdeps[task]))
+    return tasklist, deps
 
 def inherits_class(klass, d):
     val = getVar('__inherit_cache', d) or []
-    needle = os.path.join('classes', '%s.bbclass' % klass)
-    for v in val:
-        if v.endswith(needle):
-            return True
+    if os.path.join('classes', '%s.bbclass' % klass) in val:
+        return True
     return False

bitbake/lib/bb/data_smart.py

@@ -28,10 +28,9 @@ BitBake build tools.
 # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 # Based on functions from the base bb module, Copyright 2003 Holger Schurig
 
-import copy, re, sys, traceback
+import copy, re
 from collections import MutableMapping
 import logging
-import hashlib
 import bb, bb.codeparser
 from bb   import utils
 from bb.COW  import COWDictBase
@@ -39,46 +38,10 @@ from bb.COW  import COWDictBase
 logger = logging.getLogger("BitBake.Data")
 
 __setvar_keyword__ = ["_append", "_prepend"]
-__setvar_regexp__ = re.compile('(?P<base>.*?)(?P<keyword>_append|_prepend)(_(?P<add>.*))?$')
+__setvar_regexp__ = re.compile('(?P<base>.*?)(?P<keyword>_append|_prepend)(_(?P<add>.*))?')
 __expand_var_regexp__ = re.compile(r"\${[^{}]+}")
 __expand_python_regexp__ = re.compile(r"\${@.+?}")
 
-def infer_caller_details(loginfo, parent = False, varval = True):
-    """Save the caller the trouble of specifying everything."""
-    # Save effort.
-    if 'ignore' in loginfo and loginfo['ignore']:
-        return
-    # If nothing was provided, mark this as possibly unneeded.
-    if not loginfo:
-        loginfo['ignore'] = True
-        return
-    # Infer caller's likely values for variable (var) and value (value), 
-    # to reduce clutter in the rest of the code.
-    if varval and ('variable' not in loginfo or 'detail' not in loginfo):
-        try:
-            raise Exception
-        except Exception:
-            tb = sys.exc_info()[2]
-            if parent:
-                above = tb.tb_frame.f_back.f_back
-            else:
-                above = tb.tb_frame.f_back
-            lcls = above.f_locals.items()
-        for k, v in lcls:
-            if k == 'value' and 'detail' not in loginfo:
-                loginfo['detail'] = v
-            if k == 'var' and 'variable' not in loginfo:
-                loginfo['variable'] = v
-    # Infer file/line/function from traceback
-    if 'file' not in loginfo:
-        depth = 3    
-        if parent:
-            depth = 4
-        file, line, func, text = traceback.extract_stack(limit = depth)[0]
-        loginfo['file'] = file
-        loginfo['line'] = line
-        if func not in loginfo:
-            loginfo['func'] = func
 
 class VariableParse:
     def __init__(self, varname, d, val = None):
@@ -94,7 +57,7 @@ class VariableParse:
             if self.varname and key:
                 if self.varname == key:
                     raise Exception("variable %s references itself!" % self.varname)
-            var = self.d.getVar(key, True)
+            var = self.d.getVar(key, 1)
             if var is not None:
                 self.references.add(key)
                 return var
@@ -105,14 +68,8 @@ class VariableParse:
             code = match.group()[3:-1]
             codeobj = compile(code.strip(), self.varname or "<expansion>", "eval")
 
-            parser = bb.codeparser.PythonParser(self.varname, logger)
+            parser = bb.codeparser.PythonParser()
             parser.parse_python(code)
-            if self.varname:
-                vardeps = self.d.getVarFlag(self.varname, "vardeps", True)
-                if vardeps is None:
-                    parser.log.flush()
-            else:
-                parser.log.flush()
             self.references |= parser.references
             self.execs |= parser.execs
 
@@ -138,169 +95,22 @@ class ExpansionError(Exception):
         self.expression = expression
         self.variablename = varname
         self.exception = exception
-        if varname:
-            if expression:
-                self.msg = "Failure expanding variable %s, expression was %s which triggered exception %s: %s" % (varname, expression, type(exception).__name__, exception)
-            else:
-                self.msg = "Failure expanding variable %s: %s: %s" % (varname, type(exception).__name__, exception)
-        else:
-            self.msg = "Failure expanding expression %s which triggered exception %s: %s" % (expression, type(exception).__name__, exception)
+        self.msg = "Failure expanding variable %s, expression was %s which triggered exception %s: %s" % (varname, expression, type(exception).__name__, exception)
         Exception.__init__(self, self.msg)
         self.args = (varname, expression, exception)
     def __str__(self):
         return self.msg
 
-class IncludeHistory(object):
-    def __init__(self, parent = None, filename = '[TOP LEVEL]'):
-        self.parent = parent
-        self.filename = filename
-        self.children = []
-        self.current = self
-
-    def copy(self):
-        new = IncludeHistory(self.parent, self.filename)
-        for c in self.children:
-            new.children.append(c)
-        return new
-
-    def include(self, filename):
-        newfile = IncludeHistory(self.current, filename)
-        self.current.children.append(newfile)
-        self.current = newfile
-        return self
-
-    def __enter__(self):
-        pass
-
-    def __exit__(self, a, b, c):
-        if self.current.parent:
-            self.current = self.current.parent
-        else:
-            bb.warn("Include log: Tried to finish '%s' at top level." % filename)
-        return False
-
-    def emit(self, o, level = 0):
-        """Emit an include history file, and its children."""
-        if level:
-            spaces = "  " * (level - 1)
-            o.write("# %s%s" % (spaces, self.filename))
-            if len(self.children) > 0:
-                o.write(" includes:")
-        else:
-            o.write("#\n# INCLUDE HISTORY:\n#")
-        level = level + 1
-        for child in self.children:
-            o.write("\n")
-            child.emit(o, level)
-
-class VariableHistory(object):
-    def __init__(self, dataroot):
-        self.dataroot = dataroot
-        self.variables = COWDictBase.copy()
-
-    def copy(self):
-        new = VariableHistory(self.dataroot)
-        new.variables = self.variables.copy()
-        return new
-
-    def record(self, *kwonly, **loginfo):
-        if not self.dataroot._tracking:
-            return
-        if len(kwonly) > 0:
-            raise TypeError
-        infer_caller_details(loginfo, parent = True)
-        if 'ignore' in loginfo and loginfo['ignore']:
-            return
-        if 'op' not in loginfo or not loginfo['op']:
-            loginfo['op'] = 'set'
-        if 'detail' in loginfo:
-            loginfo['detail'] = str(loginfo['detail'])
-        if 'variable' not in loginfo or 'file' not in loginfo:
-            raise ValueError("record() missing variable or file.")
-        var = loginfo['variable']
-
-        if var not in self.variables:
-            self.variables[var] = []
-        self.variables[var].append(loginfo.copy())
-
-    def variable(self, var):
-        if var in self.variables:
-            return self.variables[var]
-        else:
-            return []
-
-    def emit(self, var, oval, val, o):
-        history = self.variable(var)
-        commentVal = re.sub('\n', '\n#', str(oval))
-        if history:
-            if len(history) == 1:
-                o.write("#\n# $%s\n" % var)
-            else:
-                o.write("#\n# $%s [%d operations]\n" % (var, len(history)))
-            for event in history:
-                # o.write("# %s\n" % str(event))
-                if 'func' in event:
-                    # If we have a function listed, this is internal
-                    # code, not an operation in a config file, and the
-                    # full path is distracting.
-                    event['file'] = re.sub('.*/', '', event['file'])
-                    display_func = ' [%s]' % event['func']
-                else:
-                    display_func = ''
-                if 'flag' in event:
-                    flag = '[%s] ' % (event['flag'])
-                else:
-                    flag = ''
-                o.write("#   %s %s:%s%s\n#     %s\"%s\"\n" % (event['op'], event['file'], event['line'], display_func, flag, re.sub('\n', '\n#     ', event['detail'])))
-            if len(history) > 1:
-                o.write("# computed:\n")
-                o.write('#   "%s"\n' % (commentVal))
-        else:
-            o.write("#\n# $%s\n#   [no history recorded]\n#\n" % var)
-            o.write('#   "%s"\n' % (commentVal))
-
-    def get_variable_files(self, var):
-        """Get the files where operations are made on a variable"""
-        var_history = self.variable(var)
-        files = []
-        for event in var_history:
-            files.append(event['file'])
-        return files
-
-    def get_variable_lines(self, var, f):
-        """Get the line where a operation is made on a variable in file f"""
-        var_history = self.variable(var)
-        lines = []
-        for event in var_history:
-            if f== event['file']:
-                line = event['line']
-                lines.append(line)
-        return lines
-
-    def del_var_history(self, var):
-        if var in self.variables:
-            self.variables[var] = []
-
 class DataSmart(MutableMapping):
     def __init__(self, special = COWDictBase.copy(), seen = COWDictBase.copy() ):
         self.dict = {}
 
-        self.inchistory = IncludeHistory()
-        self.varhistory = VariableHistory(self)
-        self._tracking = False
-
         # cookie monster tribute
         self._special_values = special
         self._seen_overrides = seen
 
         self.expand_cache = {}
 
-    def enableTracking(self):
-        self._tracking = True
-
-    def disableTracking(self):
-        self._tracking = False
-
     def expandWithRefs(self, s, varname):
 
         if not isinstance(s, basestring): # sanity check
@@ -320,8 +130,6 @@ class DataSmart(MutableMapping):
                     break
             except ExpansionError:
                 raise
-            except bb.parse.SkipPackage:
-                raise
             except Exception as exc:
                 raise ExpansionError(varname, s, exc)
 
@@ -332,18 +140,14 @@ class DataSmart(MutableMapping):
 
         return varparse
 
-    def expand(self, s, varname = None):
+    def expand(self, s, varname):
         return self.expandWithRefs(s, varname).value
 
 
-    def finalize(self, parent = False):
+    def finalize(self):
         """Performs final steps upon the datastore, including application of overrides"""
 
         overrides = (self.getVar("OVERRIDES", True) or "").split(":") or []
-        finalize_caller = {
-            'op': 'finalize',
-        }
-        infer_caller_details(finalize_caller, parent = parent, varval = False)
 
         #
         # Well let us see what breaks here. We used to iterate
@@ -360,9 +164,6 @@ class DataSmart(MutableMapping):
         # Then  we will handle _append and _prepend
         #
 
-        # We only want to report finalization once per variable overridden.
-        finalizes_reported = {}
-
         for o in overrides:
             # calculate '_'+override
             l = len(o) + 1
@@ -375,19 +176,7 @@ class DataSmart(MutableMapping):
             for var in vars:
                 name = var[:-l]
                 try:
-                    # Report only once, even if multiple changes.
-                    if name not in finalizes_reported:
-                        finalizes_reported[name] = True
-                        finalize_caller['variable'] = name
-                        finalize_caller['detail'] = 'was: ' + str(self.getVar(name, False))
-                        self.varhistory.record(**finalize_caller)
-                    # Copy history of the override over.
-                    for event in self.varhistory.variable(var):
-                        loginfo = event.copy()
-                        loginfo['variable'] = name
-                        loginfo['op'] = 'override[%s]:%s' % (o, loginfo['op'])
-                        self.varhistory.record(**loginfo)
-                    self.setVar(name, self.getVar(var, False), op = 'finalize', file = 'override[%s]' % o, line = '')
+                    self.setVar(name, self.getVar(var, False))
                     self.delVar(var)
                 except Exception:
                     logger.info("Untracked delVar")
@@ -399,12 +188,7 @@ class DataSmart(MutableMapping):
                 for append in appends:
                     keep = []
                     for (a, o) in self.getVarFlag(append, op) or []:
-                        match = True
-                        if o:
-                            for o2 in o.split("_"):
-                                if not o2 in overrides:
-                                    match = False
-                        if not match:
+                        if o and not o in overrides:
                             keep.append((a ,o))
                             continue
 
@@ -418,9 +202,9 @@ class DataSmart(MutableMapping):
 
                     # We save overrides that may be applied at some later stage
                     if keep:
-                        self.setVarFlag(append, op, keep, ignore=True)
+                        self.setVarFlag(append, op, keep)
                     else:
-                        self.delVarFlag(append, op, ignore=True)
+                        self.delVarFlag(append, op)
 
     def initVar(self, var):
         self.expand_cache = {}
@@ -448,11 +232,7 @@ class DataSmart(MutableMapping):
         else:
             self.initVar(var)
 
-
-    def setVar(self, var, value, **loginfo):
-        #print("var=" + str(var) + "  val=" + str(value))
-        if 'op' not in loginfo:
-            loginfo['op'] = "set"
+    def setVar(self, var, value):
         self.expand_cache = {}
         match  = __setvar_regexp__.match(var)
         if match and match.group("keyword") in __setvar_keyword__:
@@ -461,22 +241,15 @@ class DataSmart(MutableMapping):
             override = match.group('add')
             l = self.getVarFlag(base, keyword) or []
             l.append([value, override])
-            self.setVarFlag(base, keyword, l, ignore=True)
-            # And cause that to be recorded:
-            loginfo['detail'] = value
-            loginfo['variable'] = base
-            if override:
-                loginfo['op'] = '%s[%s]' % (keyword, override)
-            else:
-                loginfo['op'] = keyword
-            self.varhistory.record(**loginfo)
+            self.setVarFlag(base, keyword, l)
+
             # todo make sure keyword is not __doc__ or __module__
             # pay the cookie monster
             try:
-                self._special_values[keyword].add(base)
+                self._special_values[keyword].add( base )
             except KeyError:
                 self._special_values[keyword] = set()
-                self._special_values[keyword].add(base)
+                self._special_values[keyword].add( base )
 
             return
 
@@ -492,28 +265,18 @@ class DataSmart(MutableMapping):
                 self._seen_overrides[override].add( var )
 
         # setting var
-        self.dict[var]["_content"] = value
-        self.varhistory.record(**loginfo)
+        self.dict[var]["content"] = value
 
     def getVar(self, var, expand=False, noweakdefault=False):
-        value = self.getVarFlag(var, "_content", False, noweakdefault)
+        return self.getVarFlag(var, "content", expand, noweakdefault)
 
-        # Call expand() separately to make use of the expand cache
-        if expand and value:
-            return self.expand(value, var)
-        return value
-
-    def renameVar(self, key, newkey, **loginfo):
+    def renameVar(self, key, newkey):
         """
         Rename the variable key to newkey
         """
         val = self.getVar(key, 0)
         if val is not None:
-            loginfo['variable'] = newkey
-            loginfo['op'] = 'rename from %s' % key
-            loginfo['detail'] = val
-            self.varhistory.record(**loginfo)
-            self.setVar(newkey, val, ignore=True)
+            self.setVar(newkey, val)
 
         for i in ('_append', '_prepend'):
             src = self.getVarFlag(key, i)
@@ -522,34 +285,15 @@ class DataSmart(MutableMapping):
 
             dest = self.getVarFlag(newkey, i) or []
             dest.extend(src)
-            self.setVarFlag(newkey, i, dest, ignore=True)
+            self.setVarFlag(newkey, i, dest)
 
             if i in self._special_values and key in self._special_values[i]:
                 self._special_values[i].remove(key)
                 self._special_values[i].add(newkey)
 
-        loginfo['variable'] = key
-        loginfo['op'] = 'rename (to)'
-        loginfo['detail'] = newkey
-        self.varhistory.record(**loginfo)
-        self.delVar(key, ignore=True)
+        self.delVar(key)
 
-    def appendVar(self, var, value, **loginfo):
-        loginfo['op'] = 'append'
-        self.varhistory.record(**loginfo)
-        newvalue = (self.getVar(var, False) or "") + value
-        self.setVar(var, newvalue, ignore=True)
-
-    def prependVar(self, var, value, **loginfo):
-        loginfo['op'] = 'prepend'
-        self.varhistory.record(**loginfo)
-        newvalue = value + (self.getVar(var, False) or "")
-        self.setVar(var, newvalue, ignore=True)
-
-    def delVar(self, var, **loginfo):
-        loginfo['detail'] = ""
-        loginfo['op'] = 'del'
-        self.varhistory.record(**loginfo)
+    def delVar(self, var):
         self.expand_cache = {}
         self.dict[var] = {}
         if '_' in var:
@@ -557,14 +301,10 @@ class DataSmart(MutableMapping):
             if override and override in self._seen_overrides and var in self._seen_overrides[override]:
                 self._seen_overrides[override].remove(var)
 
-    def setVarFlag(self, var, flag, value, **loginfo):
-        if 'op' not in loginfo:
-            loginfo['op'] = "set"
-        loginfo['flag'] = flag
-        self.varhistory.record(**loginfo)
+    def setVarFlag(self, var, flag, flagvalue):
         if not var in self.dict:
             self._makeShadowCopy(var)
-        self.dict[var][flag] = value
+        self.dict[var][flag] = flagvalue
 
     def getVarFlag(self, var, flag, expand=False, noweakdefault=False):
         local_var = self._findVar(var)
@@ -572,13 +312,13 @@ class DataSmart(MutableMapping):
         if local_var:
             if flag in local_var:
                 value = copy.copy(local_var[flag])
-            elif flag == "_content" and "defaultval" in local_var and not noweakdefault:
+            elif flag == "content" and "defaultval" in local_var and not noweakdefault:
                 value = copy.copy(local_var["defaultval"])
         if expand and value:
             value = self.expand(value, None)
         return value
 
-    def delVarFlag(self, var, flag, **loginfo):
+    def delVarFlag(self, var, flag):
         local_var = self._findVar(var)
         if not local_var:
             return
@@ -586,38 +326,15 @@ class DataSmart(MutableMapping):
             self._makeShadowCopy(var)
 
         if var in self.dict and flag in self.dict[var]:
-            loginfo['detail'] = ""
-            loginfo['op'] = 'delFlag'
-            loginfo['flag'] = flag
-            self.varhistory.record(**loginfo)
-
             del self.dict[var][flag]
 
-    def appendVarFlag(self, var, flag, value, **loginfo):
-        loginfo['op'] = 'append'
-        loginfo['flag'] = flag
-        self.varhistory.record(**loginfo)
-        newvalue = (self.getVarFlag(var, flag, False) or "") + value
-        self.setVarFlag(var, flag, newvalue, ignore=True)
-
-    def prependVarFlag(self, var, flag, value, **loginfo):
-        loginfo['op'] = 'prepend'
-        loginfo['flag'] = flag
-        self.varhistory.record(**loginfo)
-        newvalue = value + (self.getVarFlag(var, flag, False) or "")
-        self.setVarFlag(var, flag, newvalue, ignore=True)
-
-    def setVarFlags(self, var, flags, **loginfo):
-        infer_caller_details(loginfo)
+    def setVarFlags(self, var, flags):
         if not var in self.dict:
             self._makeShadowCopy(var)
 
         for i in flags:
-            if i == "_content":
+            if i == "content":
                 continue
-            loginfo['flag'] = i
-            loginfo['detail'] = flags[i]
-            self.varhistory.record(**loginfo)
             self.dict[var][i] = flags[i]
 
     def getVarFlags(self, var):
@@ -626,7 +343,7 @@ class DataSmart(MutableMapping):
 
         if local_var:
             for i in local_var:
-                if i.startswith("_"):
+                if i == "content":
                     continue
                 flags[i] = local_var[i]
 
@@ -635,21 +352,18 @@ class DataSmart(MutableMapping):
         return flags
 
 
-    def delVarFlags(self, var, **loginfo):
+    def delVarFlags(self, var):
         if not var in self.dict:
             self._makeShadowCopy(var)
 
         if var in self.dict:
             content = None
 
-            loginfo['op'] = 'delete flags'
-            self.varhistory.record(**loginfo)
-
             # try to save the content
-            if "_content" in self.dict[var]:
-                content  = self.dict[var]["_content"]
+            if "content" in self.dict[var]:
+                content  = self.dict[var]["content"]
                 self.dict[var]            = {}
-                self.dict[var]["_content"] = content
+                self.dict[var]["content"] = content
             else:
                 del self.dict[var]
 
@@ -661,11 +375,6 @@ class DataSmart(MutableMapping):
         # we really want this to be a DataSmart...
         data = DataSmart(seen=self._seen_overrides.copy(), special=self._special_values.copy())
         data.dict["_data"] = self.dict
-        data.varhistory = self.varhistory.copy()
-        data.varhistory.datasmart = data
-        data.inchistory = self.inchistory.copy()
-
-        data._tracking = self._tracking
 
         return data
 
@@ -723,36 +432,3 @@ class DataSmart(MutableMapping):
 
     def __delitem__(self, var):
         self.delVar(var)
-
-    def get_hash(self):
-        data = {}
-        d = self.createCopy()
-        bb.data.expandKeys(d)
-        bb.data.update_data(d)
-
-        config_whitelist = set((d.getVar("BB_HASHCONFIG_WHITELIST", True) or "").split())
-        keys = set(key for key in iter(d) if not key.startswith("__"))
-        for key in keys:
-            if key in config_whitelist:
-                continue
-            value = d.getVar(key, False) or ""
-            data.update({key:value})
-
-            varflags = d.getVarFlags(key)
-            if not varflags:
-                continue
-            for f in varflags:
-                data.update({'%s[%s]' % (key, f):varflags[f]})
-
-        for key in ["__BBTASKS", "__BBANONFUNCS", "__BBHANDLERS"]:
-            bb_list = d.getVar(key, False) or []
-            bb_list.sort()
-            data.update({key:str(bb_list)})
-
-            if key == "__BBANONFUNCS":
-                for i in bb_list:
-                    value = d.getVar(i, True) or ""
-                    data.update({i:value})
-
-        data_str = str([(k, data[k]) for k in sorted(data.keys())])
-        return hashlib.md5(data_str).hexdigest()

bitbake/lib/bb/event.py

@@ -32,7 +32,6 @@ import logging
 import atexit
 import traceback
 import bb.utils
-import bb.compat
 
 # This is the pid for which we should generate the event. This is set when
 # the runqueue forks off.
@@ -54,7 +53,7 @@ Registered        = 10
 AlreadyRegistered = 14
 
 # Internal
-_handlers = bb.compat.OrderedDict()
+_handlers = {}
 _ui_handlers = {}
 _ui_handler_seq = 0
 
@@ -66,8 +65,6 @@ def execute_handler(name, handler, event, d):
     event.data = d
     try:
         ret = handler(event)
-    except bb.parse.SkipPackage:
-        raise
     except Exception:
         etype, value, tb = sys.exc_info()
         logger.error("Execution of event handler '%s' failed" % name,
@@ -105,18 +102,6 @@ def print_ui_queue():
         console = logging.StreamHandler(sys.stdout)
         console.setFormatter(BBLogFormatter("%(levelname)s: %(message)s"))
         logger.handlers = [console]
-
-        # First check to see if we have any proper messages
-        msgprint = False
-        for event in ui_queue:
-            if isinstance(event, logging.LogRecord):
-                if event.levelno > logging.DEBUG:
-                    logger.handle(event)
-                    msgprint = True
-        if msgprint:
-            return
-
-        # Nope, so just print all of the messages we have (including debug messages)
         for event in ui_queue:
             if isinstance(event, logging.LogRecord):
                 logger.handle(event)
@@ -188,7 +173,7 @@ def register(name, handler):
                 _handlers[name] = noop
                 return
             env = {}
-            bb.utils.better_exec(code, env)
+            bb.utils.simple_exec(code, env)
             func = bb.utils.better_eval(name, env)
             _handlers[name] = func
         else:
@@ -217,27 +202,6 @@ def getName(e):
     else:
         return e.__name__
 
-class OperationStarted(Event):
-    """An operation has begun"""
-    def __init__(self, msg = "Operation Started"):
-        Event.__init__(self)
-        self.msg = msg
-
-class OperationCompleted(Event):
-    """An operation has completed"""
-    def __init__(self, total, msg = "Operation Completed"):
-        Event.__init__(self)
-        self.total = total
-        self.msg = msg
-
-class OperationProgress(Event):
-    """An operation is in progress"""
-    def __init__(self, current, total, msg = "Operation in Progress"):
-        Event.__init__(self)
-        self.current = current
-        self.total = total
-        self.msg = msg + ": %s/%s" % (current, total);
-
 class ConfigParsed(Event):
     """Configuration Parsing Complete"""
 
@@ -310,29 +274,15 @@ class BuildBase(Event):
 
 
 
-class BuildStarted(BuildBase, OperationStarted):
+class BuildStarted(BuildBase):
     """bbmake build run started"""
-    def __init__(self, n, p, failures = 0):
-        OperationStarted.__init__(self, "Building Started")
-        BuildBase.__init__(self, n, p, failures)
 
-class BuildCompleted(BuildBase, OperationCompleted):
+
+class BuildCompleted(BuildBase):
     """bbmake build run completed"""
-    def __init__(self, total, n, p, failures = 0):
-        if not failures:
-            OperationCompleted.__init__(self, total, "Building Succeeded")
-        else:
-            OperationCompleted.__init__(self, total, "Building Failed")
-        BuildBase.__init__(self, n, p, failures)
 
-class DiskFull(Event):
-    """Disk full case build aborted"""
-    def __init__(self, dev, type, freespace, mountpoint):
-        Event.__init__(self)
-        self._dev = dev
-        self._type = type
-        self._free = freespace
-        self._mountpoint = mountpoint
+
+
 
 class NoProvider(Event):
     """No Provider for an Event"""
@@ -377,16 +327,17 @@ class MultipleProviders(Event):
         """
         return self._candidates
 
-class ParseStarted(OperationStarted):
+class ParseStarted(Event):
     """Recipe parsing for the runqueue has begun"""
     def __init__(self, total):
-        OperationStarted.__init__(self, "Recipe parsing Started")
+        Event.__init__(self)
         self.total = total
 
-class ParseCompleted(OperationCompleted):
+class ParseCompleted(Event):
     """Recipe parsing for the runqueue has completed"""
+
     def __init__(self, cached, parsed, skipped, masked, virtuals, errors, total):
-        OperationCompleted.__init__(self, total, "Recipe parsing Completed")
+        Event.__init__(self)
         self.cached = cached
         self.parsed = parsed
         self.skipped = skipped
@@ -394,44 +345,33 @@ class ParseCompleted(OperationCompleted):
         self.masked = masked
         self.errors = errors
         self.sofar = cached + parsed
-
-class ParseProgress(OperationProgress):
-    """Recipe parsing progress"""
-    def __init__(self, current, total):
-        OperationProgress.__init__(self, current, total, "Recipe parsing")
-
-
-class CacheLoadStarted(OperationStarted):
-    """Loading of the dependency cache has begun"""
-    def __init__(self, total):
-        OperationStarted.__init__(self, "Loading cache Started")
         self.total = total
 
-class CacheLoadProgress(OperationProgress):
-    """Cache loading progress"""
-    def __init__(self, current, total):
-        OperationProgress.__init__(self, current, total, "Loading cache")
+class ParseProgress(Event):
+    """Recipe parsing progress"""
 
-class CacheLoadCompleted(OperationCompleted):
+    def __init__(self, current):
+        self.current = current
+
+class CacheLoadStarted(Event):
+    """Loading of the dependency cache has begun"""
+    def __init__(self, total):
+        Event.__init__(self)
+        self.total = total
+
+class CacheLoadProgress(Event):
+    """Cache loading progress"""
+    def __init__(self, current):
+        Event.__init__(self)
+        self.current = current
+
+class CacheLoadCompleted(Event):
     """Cache loading is complete"""
     def __init__(self, total, num_entries):
-        OperationCompleted.__init__(self, total, "Loading cache Completed")
+        Event.__init__(self)
+        self.total = total
         self.num_entries = num_entries
 
-class TreeDataPreparationStarted(OperationStarted):
-    """Tree data preparation started"""
-    def __init__(self):
-        OperationStarted.__init__(self, "Preparing tree data Started")
-
-class TreeDataPreparationProgress(OperationProgress):
-    """Tree data preparation is in progress"""
-    def __init__(self, current, total):
-        OperationProgress.__init__(self, current, total, "Preparing tree data")
-
-class TreeDataPreparationCompleted(OperationCompleted):
-    """Tree data preparation completed"""
-    def __init__(self, total):
-        OperationCompleted.__init__(self, total, "Preparing tree data Completed")
 
 class DepTreeGenerated(Event):
     """
@@ -460,14 +400,6 @@ class FilesMatchingFound(Event):
         self._pattern = pattern
         self._matches = matches
 
-class CoreBaseFilesFound(Event):
-    """
-    Event when a list of appropriate config files has been generated
-    """
-    def __init__(self, paths):
-        Event.__init__(self)
-        self._paths = paths
-
 class ConfigFilesFound(Event):
     """
     Event when a list of appropriate config files has been generated
@@ -510,15 +442,6 @@ class MsgFatal(MsgBase):
 class MsgPlain(MsgBase):
     """General output"""
 
-class LogExecTTY(Event):
-    """Send event containing program to spawn on tty of the logger"""
-    def __init__(self, msg, prog, sleep_delay, retries):
-        Event.__init__(self)
-        self.msg = msg
-        self.prog = prog
-        self.sleep_delay = sleep_delay
-        self.retries = retries
-
 class LogHandler(logging.Handler):
     """Dispatch logging messages as bitbake events"""
 
@@ -534,51 +457,3 @@ class LogHandler(logging.Handler):
     def filter(self, record):
         record.taskpid = worker_pid
         return True
-
-class RequestPackageInfo(Event):
-    """
-    Event to request package information
-    """
-
-class PackageInfo(Event):
-    """
-    Package information for GUI
-    """
-    def __init__(self, pkginfolist):
-        Event.__init__(self)
-        self._pkginfolist = pkginfolist
-
-class SanityCheck(Event):
-    """
-    Event to issue sanity check
-    """
-
-class SanityCheckPassed(Event):
-    """
-    Event to indicate sanity check is passed
-    """
-
-class SanityCheckFailed(Event):
-    """
-    Event to indicate sanity check has failed
-    """
-    def __init__(self, msg, network_error=False):
-        Event.__init__(self)
-        self._msg = msg
-        self._network_error = network_error
-
-class NetworkTest(Event):
-    """
-    Event to start network test
-    """
-
-class NetworkTestPassed(Event):
-    """
-    Event to indicate network test has passed
-    """
-
-class NetworkTestFailed(Event):
-    """
-    Event to indicate network test has failed
-    """
-

bitbake/lib/bb/exceptions.py

@@ -32,14 +32,7 @@ class TracebackEntry(namedtuple.abc):
 def _get_frame_args(frame):
     """Get the formatted arguments and class (if available) for a frame"""
     arginfo = inspect.getargvalues(frame)
-
-    try:
-        if not arginfo.args:
-            return '', None
-    # There have been reports from the field of python 2.6 which doesn't 
-    # return a namedtuple here but simply a tuple so fallback gracefully if
-    # args isn't present.
-    except AttributeError:
+    if not arginfo.args:
         return '', None
 
     firstarg = arginfo.args[0]

bitbake/lib/bb/fetch/__init__.py

@@ -0,0 +1,832 @@
+# ex:ts=4:sw=4:sts=4:et
+# -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*-
+"""
+BitBake 'Fetch' implementations
+
+Classes for obtaining upstream sources for the
+BitBake build tools.
+"""
+
+# Copyright (C) 2003, 2004  Chris Larson
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Based on functions from the base bb module, Copyright 2003 Holger Schurig
+
+from __future__ import absolute_import
+from __future__ import print_function
+import os, re
+import logging
+import bb
+from   bb import data
+from   bb import persist_data
+from   bb import utils
+
+__version__ = "1"
+
+logger = logging.getLogger("BitBake.Fetch")
+
+class MalformedUrl(Exception):
+    """Exception raised when encountering an invalid url"""
+
+class FetchError(Exception):
+    """Exception raised when a download fails"""
+
+class NoMethodError(Exception):
+    """Exception raised when there is no method to obtain a supplied url or set of urls"""
+
+class MissingParameterError(Exception):
+    """Exception raised when a fetch method is missing a critical parameter in the url"""
+
+class ParameterError(Exception):
+    """Exception raised when a url cannot be proccessed due to invalid parameters."""
+
+class MD5SumError(Exception):
+    """Exception raised when a MD5SUM of a file does not match the expected one"""
+
+class InvalidSRCREV(Exception):
+    """Exception raised when an invalid SRCREV is encountered"""
+
+def decodeurl(url):
+    """Decodes an URL into the tokens (scheme, network location, path,
+    user, password, parameters).
+    """
+
+    m = re.compile('(?P<type>[^:]*)://((?P<user>.+)@)?(?P<location>[^;]+)(;(?P<parm>.*))?').match(url)
+    if not m:
+        raise MalformedUrl(url)
+
+    type = m.group('type')
+    location = m.group('location')
+    if not location:
+        raise MalformedUrl(url)
+    user = m.group('user')
+    parm = m.group('parm')
+
+    locidx = location.find('/')
+    if locidx != -1 and type.lower() != 'file':
+        host = location[:locidx]
+        path = location[locidx:]
+    else:
+        host = ""
+        path = location
+    if user:
+        m = re.compile('(?P<user>[^:]+)(:?(?P<pswd>.*))').match(user)
+        if m:
+            user = m.group('user')
+            pswd = m.group('pswd')
+    else:
+        user = ''
+        pswd = ''
+
+    p = {}
+    if parm:
+        for s in parm.split(';'):
+            s1, s2 = s.split('=')
+            p[s1] = s2
+
+    return (type, host, path, user, pswd, p)
+
+def encodeurl(decoded):
+    """Encodes a URL from tokens (scheme, network location, path,
+    user, password, parameters).
+    """
+
+    (type, host, path, user, pswd, p) = decoded
+
+    if not type or not path:
+        raise MissingParameterError("Type or path url components missing when encoding %s" % decoded)
+    url = '%s://' % type
+    if user:
+        url += "%s" % user
+        if pswd:
+            url += ":%s" % pswd
+        url += "@"
+    if host:
+        url += "%s" % host
+    url += "%s" % path
+    if p:
+        for parm in p:
+            url += ";%s=%s" % (parm, p[parm])
+
+    return url
+
+def uri_replace(uri, uri_find, uri_replace, d):
+    if not uri or not uri_find or not uri_replace:
+        logger.debug(1, "uri_replace: passed an undefined value, not replacing")
+    uri_decoded = list(decodeurl(uri))
+    uri_find_decoded = list(decodeurl(uri_find))
+    uri_replace_decoded = list(decodeurl(uri_replace))
+    result_decoded = ['', '', '', '', '', {}]
+    for i in uri_find_decoded:
+        loc = uri_find_decoded.index(i)
+        result_decoded[loc] = uri_decoded[loc]
+        if isinstance(i, basestring):
+            if (re.match(i, uri_decoded[loc])):
+                result_decoded[loc] = re.sub(i, uri_replace_decoded[loc], uri_decoded[loc])
+                if uri_find_decoded.index(i) == 2:
+                    if d:
+                        localfn = bb.fetch.localpath(uri, d)
+                        if localfn:
+                            result_decoded[loc] = os.path.join(os.path.dirname(result_decoded[loc]), os.path.basename(bb.fetch.localpath(uri, d)))
+            else:
+                return uri
+    return encodeurl(result_decoded)
+
+methods = []
+urldata_cache = {}
+saved_headrevs = {}
+
+def fetcher_init(d):
+    """
+    Called to initialize the fetchers once the configuration data is known.
+    Calls before this must not hit the cache.
+    """
+    # When to drop SCM head revisions controlled by user policy
+    srcrev_policy = bb.data.getVar('BB_SRCREV_POLICY', d, 1) or "clear"
+    if srcrev_policy == "cache":
+        logger.debug(1, "Keeping SRCREV cache due to cache policy of: %s", srcrev_policy)
+    elif srcrev_policy == "clear":
+        logger.debug(1, "Clearing SRCREV cache due to cache policy of: %s", srcrev_policy)
+        revs = persist_data.persist('BB_URI_HEADREVS', d)
+        try:
+            bb.fetch.saved_headrevs = revs.items()
+        except:
+            pass
+        revs.clear()
+    else:
+        raise FetchError("Invalid SRCREV cache policy of: %s" % srcrev_policy)
+
+    for m in methods:
+        if hasattr(m, "init"):
+            m.init(d)
+
+def fetcher_compare_revisions(d):
+    """
+    Compare the revisions in the persistant cache with current values and
+    return true/false on whether they've changed.
+    """
+
+    data = persist_data.persist('BB_URI_HEADREVS', d).items()
+    data2 = bb.fetch.saved_headrevs
+
+    changed = False
+    for key in data:
+        if key not in data2 or data2[key] != data[key]:
+            logger.debug(1, "%s changed", key)
+            changed = True
+            return True
+        else:
+            logger.debug(2, "%s did not change", key)
+    return False
+
+# Function call order is usually:
+#   1. init
+#   2. go
+#   3. localpaths
+# localpath can be called at any time
+
+def init(urls, d, setup = True):
+    urldata = {}
+
+    fn = bb.data.getVar('FILE', d, 1)
+    if fn in urldata_cache:
+        urldata = urldata_cache[fn]
+
+    for url in urls:
+        if url not in urldata:
+            urldata[url] = FetchData(url, d)
+
+    if setup:
+        for url in urldata:
+            if not urldata[url].setup:
+                urldata[url].setup_localpath(d)
+
+    urldata_cache[fn] = urldata
+    return urldata
+
+def mirror_from_string(data):
+    return [ i.split() for i in (data or "").replace('\\n','\n').split('\n') if i ]
+
+def verify_checksum(u, ud, d):
+    """
+    verify the MD5 and SHA256 checksum for downloaded src
+
+    return value:
+        - True: checksum matched
+        - False: checksum unmatched
+
+    if checksum is missing in recipes file, "BB_STRICT_CHECKSUM" decide the return value.
+    if BB_STRICT_CHECKSUM = "1" then return false as unmatched, otherwise return true as
+    matched
+    """
+
+    if not ud.type in ["http", "https", "ftp", "ftps"]:
+        return
+
+    md5data = bb.utils.md5_file(ud.localpath)
+    sha256data = bb.utils.sha256_file(ud.localpath)
+
+    if (ud.md5_expected == None or ud.sha256_expected == None):
+        logger.warn('Missing SRC_URI checksum for %s, consider adding to the recipe:\n'
+                    'SRC_URI[%s] = "%s"\nSRC_URI[%s] = "%s"',
+                    ud.localpath, ud.md5_name, md5data,
+                    ud.sha256_name, sha256data)
+        if bb.data.getVar("BB_STRICT_CHECKSUM", d, True) == "1":
+            raise FetchError("No checksum specified for %s." % u)
+        return
+
+    if (ud.md5_expected != md5data or ud.sha256_expected != sha256data):
+        logger.error('The checksums for "%s" did not match.\n'
+                     '  MD5: expected "%s", got "%s"\n'
+                     '  SHA256: expected "%s", got "%s"\n',
+                     ud.localpath, ud.md5_expected, md5data,
+                     ud.sha256_expected, sha256data)
+        raise FetchError("%s checksum mismatch." % u)
+
+def go(d, urls = None):
+    """
+    Fetch all urls
+    init must have previously been called
+    """
+    if not urls:
+        urls = d.getVar("SRC_URI", 1).split()
+    urldata = init(urls, d, True)
+
+    for u in urls:
+        ud = urldata[u]
+        m = ud.method
+        localpath = ""
+
+        if not ud.localfile:
+            continue
+
+        lf = bb.utils.lockfile(ud.lockfile)
+
+        if m.try_premirror(u, ud, d):
+            # First try fetching uri, u, from PREMIRRORS
+            mirrors = mirror_from_string(bb.data.getVar('PREMIRRORS', d, True))
+            localpath = try_mirrors(d, u, mirrors, False, m.forcefetch(u, ud, d))
+        elif os.path.exists(ud.localfile):
+            localpath = ud.localfile
+
+        # Need to re-test forcefetch() which will return true if our copy is too old
+        if m.forcefetch(u, ud, d) or not localpath:
+            # Next try fetching from the original uri, u
+            try:
+                m.go(u, ud, d)
+                localpath = ud.localpath
+            except FetchError:
+                # Remove any incomplete file
+                bb.utils.remove(ud.localpath)
+                # Finally, try fetching uri, u, from MIRRORS
+                mirrors = mirror_from_string(bb.data.getVar('MIRRORS', d, True))
+                localpath = try_mirrors (d, u, mirrors)
+                if not localpath or not os.path.exists(localpath):
+                    raise FetchError("Unable to fetch URL %s from any source." % u)
+
+        ud.localpath = localpath
+
+        if os.path.exists(ud.md5):
+            # Touch the md5 file to show active use of the download
+            try:
+                os.utime(ud.md5, None)
+            except:
+                # Errors aren't fatal here
+                pass
+        else:
+            # Only check the checksums if we've not seen this item before
+            verify_checksum(u, ud, d)
+            Fetch.write_md5sum(u, ud, d)
+
+        bb.utils.unlockfile(lf)
+
+def checkstatus(d, urls = None):
+    """
+    Check all urls exist upstream
+    init must have previously been called
+    """
+    urldata = init([], d, True)
+
+    if not urls:
+        urls = urldata
+
+    for u in urls:
+        ud = urldata[u]
+        m = ud.method
+        logger.debug(1, "Testing URL %s", u)
+        # First try checking uri, u, from PREMIRRORS
+        mirrors = mirror_from_string(bb.data.getVar('PREMIRRORS', d, True))
+        ret = try_mirrors(d, u, mirrors, True)
+        if not ret:
+            # Next try checking from the original uri, u
+            try:
+                ret = m.checkstatus(u, ud, d)
+            except:
+                # Finally, try checking uri, u, from MIRRORS
+                mirrors = mirror_from_string(bb.data.getVar('MIRRORS', d, True))
+                ret = try_mirrors (d, u, mirrors, True)
+
+        if not ret:
+            raise FetchError("URL %s doesn't work" % u)
+
+def localpaths(d):
+    """
+    Return a list of the local filenames, assuming successful fetch
+    """
+    local = []
+    urldata = init([], d, True)
+
+    for u in urldata:
+        ud = urldata[u]
+        local.append(ud.localpath)
+
+    return local
+
+srcrev_internal_call = False
+
+def get_autorev(d):
+    return get_srcrev(d)
+
+def get_srcrev(d):
+    """
+    Return the version string for the current package
+    (usually to be used as PV)
+    Most packages usually only have one SCM so we just pass on the call.
+    In the multi SCM case, we build a value based on SRCREV_FORMAT which must
+    have been set.
+    """
+
+    #
+    # Ugly code alert. localpath in the fetchers will try to evaluate SRCREV which
+    # could translate into a call to here. If it does, we need to catch this
+    # and provide some way so it knows get_srcrev is active instead of being
+    # some number etc. hence the srcrev_internal_call tracking and the magic
+    # "SRCREVINACTION" return value.
+    #
+    # Neater solutions welcome!
+    #
+    if bb.fetch.srcrev_internal_call:
+        return "SRCREVINACTION"
+
+    scms = []
+
+    # Only call setup_localpath on URIs which supports_srcrev()
+    urldata = init(bb.data.getVar('SRC_URI', d, 1).split(), d, False)
+    for u in urldata:
+        ud = urldata[u]
+        if ud.method.supports_srcrev():
+            if not ud.setup:
+                ud.setup_localpath(d)
+            scms.append(u)
+
+    if len(scms) == 0:
+        logger.error("SRCREV was used yet no valid SCM was found in SRC_URI")
+        raise ParameterError
+
+    if bb.data.getVar('BB_SRCREV_POLICY', d, True) != "cache":
+        bb.data.setVar('__BB_DONT_CACHE', '1', d)
+
+    if len(scms) == 1:
+        return urldata[scms[0]].method.sortable_revision(scms[0], urldata[scms[0]], d)
+
+    #
+    # Mutiple SCMs are in SRC_URI so we resort to SRCREV_FORMAT
+    #
+    format = bb.data.getVar('SRCREV_FORMAT', d, 1)
+    if not format:
+        logger.error("The SRCREV_FORMAT variable must be set when multiple SCMs are used.")
+        raise ParameterError
+
+    for scm in scms:
+        if 'name' in urldata[scm].parm:
+            name = urldata[scm].parm["name"]
+            rev = urldata[scm].method.sortable_revision(scm, urldata[scm], d)
+            format = format.replace(name, rev)
+
+    return format
+
+def localpath(url, d, cache = True):
+    """
+    Called from the parser with cache=False since the cache isn't ready
+    at this point. Also called from classed in OE e.g. patch.bbclass
+    """
+    ud = init([url], d)
+    if ud[url].method:
+        return ud[url].localpath
+    return url
+
+def runfetchcmd(cmd, d, quiet = False):
+    """
+    Run cmd returning the command output
+    Raise an error if interrupted or cmd fails
+    Optionally echo command output to stdout
+    """
+
+    # Need to export PATH as binary could be in metadata paths
+    # rather than host provided
+    # Also include some other variables.
+    # FIXME: Should really include all export varaiables?
+    exportvars = ['PATH', 'GIT_PROXY_COMMAND', 'GIT_PROXY_HOST',
+                  'GIT_PROXY_PORT', 'GIT_CONFIG', 'http_proxy', 'ftp_proxy',
+                  'https_proxy', 'no_proxy', 'ALL_PROXY', 'all_proxy',
+                  'KRB5CCNAME', 'SSH_AUTH_SOCK', 'SSH_AGENT_PID', 'HOME']
+
+    for var in exportvars:
+        val = data.getVar(var, d, True)
+        if val:
+            cmd = 'export ' + var + '=\"%s\"; %s' % (val, cmd)
+
+    logger.debug(1, "Running %s", cmd)
+
+    # redirect stderr to stdout
+    stdout_handle = os.popen(cmd + " 2>&1", "r")
+    output = ""
+
+    while True:
+        line = stdout_handle.readline()
+        if not line:
+            break
+        if not quiet:
+            print(line, end=' ')
+        output += line
+
+    status = stdout_handle.close() or 0
+    signal = status >> 8
+    exitstatus = status & 0xff
+
+    if signal:
+        raise FetchError("Fetch command %s failed with signal %s, output:\n%s" % (cmd, signal, output))
+    elif status != 0:
+        raise FetchError("Fetch command %s failed with exit code %s, output:\n%s" % (cmd, status, output))
+
+    return output
+
+def try_mirrors(d, uri, mirrors, check = False, force = False):
+    """
+    Try to use a mirrored version of the sources.
+    This method will be automatically called before the fetchers go.
+
+    d Is a bb.data instance
+    uri is the original uri we're trying to download
+    mirrors is the list of mirrors we're going to try
+    """
+    fpath = os.path.join(data.getVar("DL_DIR", d, 1), os.path.basename(uri))
+    if not check and os.access(fpath, os.R_OK) and not force:
+        logger.debug(1, "%s already exists, skipping checkout.", fpath)
+        return fpath
+
+    ld = d.createCopy()
+    for (find, replace) in mirrors:
+        newuri = uri_replace(uri, find, replace, ld)
+        if newuri != uri:
+            try:
+                ud = FetchData(newuri, ld)
+            except bb.fetch.NoMethodError:
+                logger.debug(1, "No method for %s", uri)
+                continue
+
+            ud.setup_localpath(ld)
+
+            try:
+                if check:
+                    found = ud.method.checkstatus(newuri, ud, ld)
+                    if found:
+                        return found
+                else:
+                    ud.method.go(newuri, ud, ld)
+                    return ud.localpath
+            except (bb.fetch.MissingParameterError,
+                    bb.fetch.FetchError,
+                    bb.fetch.MD5SumError):
+                import sys
+                (type, value, traceback) = sys.exc_info()
+                logger.debug(2, "Mirror fetch failure: %s", value)
+                bb.utils.remove(ud.localpath)
+                continue
+    return None
+
+
+class FetchData(object):
+    """
+    A class which represents the fetcher state for a given URI.
+    """
+    def __init__(self, url, d):
+        self.localfile = ""
+        (self.type, self.host, self.path, self.user, self.pswd, self.parm) = decodeurl(data.expand(url, d))
+        self.date = Fetch.getSRCDate(self, d)
+        self.url = url
+        if not self.user and "user" in self.parm:
+            self.user = self.parm["user"]
+        if not self.pswd and "pswd" in self.parm:
+            self.pswd = self.parm["pswd"]
+        self.setup = False
+
+        if "name" in self.parm:
+            self.md5_name = "%s.md5sum" % self.parm["name"]
+            self.sha256_name = "%s.sha256sum" % self.parm["name"]
+        else:
+            self.md5_name = "md5sum"
+            self.sha256_name = "sha256sum"
+        self.md5_expected = bb.data.getVarFlag("SRC_URI", self.md5_name, d)
+        self.sha256_expected = bb.data.getVarFlag("SRC_URI", self.sha256_name, d)
+
+        for m in methods:
+            if m.supports(url, self, d):
+                self.method = m
+                return
+        raise NoMethodError("Missing implementation for url %s" % url)
+
+    def setup_localpath(self, d):
+        self.setup = True
+        if "localpath" in self.parm:
+            # if user sets localpath for file, use it instead.
+            self.localpath = self.parm["localpath"]
+            self.basename = os.path.basename(self.localpath)
+        else:
+            premirrors = bb.data.getVar('PREMIRRORS', d, True)
+            local = ""
+            if premirrors and self.url:
+                aurl = self.url.split(";")[0]
+                mirrors = mirror_from_string(premirrors)
+                for (find, replace) in mirrors:
+                    if replace.startswith("file://"):
+                        path = aurl.split("://")[1]
+                        path = path.split(";")[0]
+                        local = replace.split("://")[1] + os.path.basename(path)
+                        if local == aurl or not os.path.exists(local) or os.path.isdir(local):
+                            local = ""
+                self.localpath = local
+            if not local:
+                try:
+                    bb.fetch.srcrev_internal_call = True
+                    self.localpath = self.method.localpath(self.url, self, d)
+                finally:
+                    bb.fetch.srcrev_internal_call = False
+                # We have to clear data's internal caches since the cached value of SRCREV is now wrong.
+                # Horrible...
+                bb.data.delVar("ISHOULDNEVEREXIST", d)
+
+        if self.localpath is not None:
+            # Note: These files should always be in DL_DIR whereas localpath may not be.
+            basepath = bb.data.expand("${DL_DIR}/%s" % os.path.basename(self.localpath), d)
+            self.md5 = basepath + '.md5'
+            self.lockfile = basepath + '.lock'
+
+
+class Fetch(object):
+    """Base class for 'fetch'ing data"""
+
+    def __init__(self, urls = []):
+        self.urls = []
+
+    def supports(self, url, urldata, d):
+        """
+        Check to see if this fetch class supports a given url.
+        """
+        return 0
+
+    def localpath(self, url, urldata, d):
+        """
+        Return the local filename of a given url assuming a successful fetch.
+        Can also setup variables in urldata for use in go (saving code duplication
+        and duplicate code execution)
+        """
+        return url
+    def _strip_leading_slashes(self, relpath):
+        """
+        Remove leading slash as os.path.join can't cope
+        """
+        while os.path.isabs(relpath):
+            relpath = relpath[1:]
+        return relpath
+
+    def setUrls(self, urls):
+        self.__urls = urls
+
+    def getUrls(self):
+        return self.__urls
+
+    urls = property(getUrls, setUrls, None, "Urls property")
+
+    def forcefetch(self, url, urldata, d):
+        """
+        Force a fetch, even if localpath exists?
+        """
+        return False
+
+    def supports_srcrev(self):
+        """
+        The fetcher supports auto source revisions (SRCREV)
+        """
+        return False
+
+    def go(self, url, urldata, d):
+        """
+        Fetch urls
+        Assumes localpath was called first
+        """
+        raise NoMethodError("Missing implementation for url")
+
+    def try_premirror(self, url, urldata, d):
+        """
+        Should premirrors be used?
+        """
+        if urldata.method.forcefetch(url, urldata, d):
+            return True
+        elif os.path.exists(urldata.md5) and os.path.exists(urldata.localfile):
+            return False
+        else:
+            return True
+
+    def checkstatus(self, url, urldata, d):
+        """
+        Check the status of a URL
+        Assumes localpath was called first
+        """
+        logger.info("URL %s could not be checked for status since no method exists.", url)
+        return True
+
+    def getSRCDate(urldata, d):
+        """
+        Return the SRC Date for the component
+
+        d the bb.data module
+        """
+        if "srcdate" in urldata.parm:
+            return urldata.parm['srcdate']
+
+        pn = data.getVar("PN", d, 1)
+
+        if pn:
+            return data.getVar("SRCDATE_%s" % pn, d, 1) or data.getVar("CVSDATE_%s" % pn, d, 1) or data.getVar("SRCDATE", d, 1) or data.getVar("CVSDATE", d, 1) or data.getVar("DATE", d, 1)
+
+        return data.getVar("SRCDATE", d, 1) or data.getVar("CVSDATE", d, 1) or data.getVar("DATE", d, 1)
+    getSRCDate = staticmethod(getSRCDate)
+
+    def srcrev_internal_helper(ud, d):
+        """
+        Return:
+            a) a source revision if specified
+            b) True if auto srcrev is in action
+            c) False otherwise
+        """
+
+        if 'rev' in ud.parm:
+            return ud.parm['rev']
+
+        if 'tag' in ud.parm:
+            return ud.parm['tag']
+
+        rev = None
+        if 'name' in ud.parm:
+            pn = data.getVar("PN", d, 1)
+            rev = data.getVar("SRCREV_%s_pn-%s" % (ud.parm['name'], pn), d, 1)
+            if not rev:
+                rev = data.getVar("SRCREV_pn-%s_%s" % (pn, ud.parm['name']), d, 1)
+            if not rev:
+                rev = data.getVar("SRCREV_%s" % (ud.parm['name']), d, 1)
+        if not rev:
+            rev = data.getVar("SRCREV", d, 1)
+        if rev == "INVALID":
+            raise InvalidSRCREV("Please set SRCREV to a valid value")
+        if not rev:
+            return False
+        if rev == "SRCREVINACTION":
+            return True
+        return rev
+
+    srcrev_internal_helper = staticmethod(srcrev_internal_helper)
+
+    def localcount_internal_helper(ud, d):
+        """
+        Return:
+            a) a locked localcount if specified
+            b) None otherwise
+        """
+
+        localcount = None
+        if 'name' in ud.parm:
+            pn = data.getVar("PN", d, 1)
+            localcount = data.getVar("LOCALCOUNT_" + ud.parm['name'], d, 1)
+        if not localcount:
+            localcount = data.getVar("LOCALCOUNT", d, 1)
+        return localcount
+
+    localcount_internal_helper = staticmethod(localcount_internal_helper)
+
+    def verify_md5sum(ud, got_sum):
+        """
+        Verify the md5sum we wanted with the one we got
+        """
+        wanted_sum = ud.parm.get('md5sum')
+        if not wanted_sum:
+            return True
+
+        return wanted_sum == got_sum
+    verify_md5sum = staticmethod(verify_md5sum)
+
+    def write_md5sum(url, ud, d):
+        md5data = bb.utils.md5_file(ud.localpath)
+        # verify the md5sum
+        if not Fetch.verify_md5sum(ud, md5data):
+            raise MD5SumError(url)
+
+        md5out = file(ud.md5, 'w')
+        md5out.write(md5data)
+        md5out.close()
+    write_md5sum = staticmethod(write_md5sum)
+
+    def latest_revision(self, url, ud, d):
+        """
+        Look in the cache for the latest revision, if not present ask the SCM.
+        """
+        if not hasattr(self, "_latest_revision"):
+            raise ParameterError
+
+        revs = persist_data.persist('BB_URI_HEADREVS', d)
+        key = self.generate_revision_key(url, ud, d)
+        try:
+            return revs[key]
+        except KeyError:
+            revs[key] = rev = self._latest_revision(url, ud, d)
+            return rev
+
+    def sortable_revision(self, url, ud, d):
+        """
+
+        """
+        if hasattr(self, "_sortable_revision"):
+            return self._sortable_revision(url, ud, d)
+
+        localcounts = persist_data.persist('BB_URI_LOCALCOUNT', d)
+        key = self.generate_revision_key(url, ud, d)
+
+        latest_rev = self._build_revision(url, ud, d)
+        last_rev = localcounts.get(key + '_rev')
+        uselocalcount = bb.data.getVar("BB_LOCALCOUNT_OVERRIDE", d, True) or False
+        count = None
+        if uselocalcount:
+            count = Fetch.localcount_internal_helper(ud, d)
+        if count is None:
+            count = localcounts.get(key + '_count')
+
+        if last_rev == latest_rev:
+            return str(count + "+" + latest_rev)
+
+        buildindex_provided = hasattr(self, "_sortable_buildindex")
+        if buildindex_provided:
+            count = self._sortable_buildindex(url, ud, d, latest_rev)
+
+        if count is None:
+            count = "0"
+        elif uselocalcount or buildindex_provided:
+            count = str(count)
+        else:
+            count = str(int(count) + 1)
+
+        localcounts[key + '_rev'] = latest_rev
+        localcounts[key + '_count'] = count
+
+        return str(count + "+" + latest_rev)
+
+    def generate_revision_key(self, url, ud, d):
+        key = self._revision_key(url, ud, d)
+        return "%s-%s" % (key, bb.data.getVar("PN", d, True) or "")
+
+from . import cvs
+from . import git
+from . import local
+from . import svn
+from . import wget
+from . import svk
+from . import ssh
+from . import perforce
+from . import bzr
+from . import hg
+from . import osc
+from . import repo
+
+methods.append(local.Local())
+methods.append(wget.Wget())
+methods.append(svn.Svn())
+methods.append(git.Git())
+methods.append(cvs.Cvs())
+methods.append(svk.Svk())
+methods.append(ssh.SSH())
+methods.append(perforce.Perforce())
+methods.append(bzr.Bzr())
+methods.append(hg.Hg())
+methods.append(osc.Osc())
+methods.append(repo.Repo())

bitbake/lib/bb/fetch/bzr.py

@@ -0,0 +1,148 @@
+"""
+BitBake 'Fetch' implementation for bzr.
+
+"""
+
+# Copyright (C) 2007 Ross Burton
+# Copyright (C) 2007 Richard Purdie
+#
+#   Classes for obtaining upstream sources for the
+#   BitBake build tools.
+#   Copyright (C) 2003, 2004  Chris Larson
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+
+import os
+import sys
+import logging
+import bb
+from bb import data
+from bb.fetch import Fetch, FetchError, runfetchcmd, logger
+
+class Bzr(Fetch):
+    def supports(self, url, ud, d):
+        return ud.type in ['bzr']
+
+    def localpath (self, url, ud, d):
+
+        # Create paths to bzr checkouts
+        relpath = self._strip_leading_slashes(ud.path)
+        ud.pkgdir = os.path.join(data.expand('${BZRDIR}', d), ud.host, relpath)
+
+        revision = Fetch.srcrev_internal_helper(ud, d)
+        if revision is True:
+            ud.revision = self.latest_revision(url, ud, d)
+        elif revision:
+            ud.revision = revision
+
+        if not ud.revision:
+            ud.revision = self.latest_revision(url, ud, d)
+
+        ud.localfile = data.expand('bzr_%s_%s_%s.tar.gz' % (ud.host, ud.path.replace('/', '.'), ud.revision), d)
+
+        return os.path.join(data.getVar("DL_DIR", d, True), ud.localfile)
+
+    def _buildbzrcommand(self, ud, d, command):
+        """
+        Build up an bzr commandline based on ud
+        command is "fetch", "update", "revno"
+        """
+
+        basecmd = data.expand('${FETCHCMD_bzr}', d)
+
+        proto =  ud.parm.get('proto', 'http')
+
+        bzrroot = ud.host + ud.path
+
+        options = []
+
+        if command == "revno":
+            bzrcmd = "%s revno %s %s://%s" % (basecmd, " ".join(options), proto, bzrroot)
+        else:
+            if ud.revision:
+                options.append("-r %s" % ud.revision)
+
+            if command == "fetch":
+                bzrcmd = "%s co %s %s://%s" % (basecmd, " ".join(options), proto, bzrroot)
+            elif command == "update":
+                bzrcmd = "%s pull %s --overwrite" % (basecmd, " ".join(options))
+            else:
+                raise FetchError("Invalid bzr command %s" % command)
+
+        return bzrcmd
+
+    def go(self, loc, ud, d):
+        """Fetch url"""
+
+        if os.access(os.path.join(ud.pkgdir, os.path.basename(ud.pkgdir), '.bzr'), os.R_OK):
+            bzrcmd = self._buildbzrcommand(ud, d, "update")
+            logger.debug(1, "BZR Update %s", loc)
+            os.chdir(os.path.join (ud.pkgdir, os.path.basename(ud.path)))
+            runfetchcmd(bzrcmd, d)
+        else:
+            bb.utils.remove(os.path.join(ud.pkgdir, os.path.basename(ud.pkgdir)), True)
+            bzrcmd = self._buildbzrcommand(ud, d, "fetch")
+            logger.debug(1, "BZR Checkout %s", loc)
+            bb.utils.mkdirhier(ud.pkgdir)
+            os.chdir(ud.pkgdir)
+            logger.debug(1, "Running %s", bzrcmd)
+            runfetchcmd(bzrcmd, d)
+
+        os.chdir(ud.pkgdir)
+
+        scmdata = ud.parm.get("scmdata", "")
+        if scmdata == "keep":
+            tar_flags = ""
+        else:
+            tar_flags = "--exclude '.bzr' --exclude '.bzrtags'"
+
+        # tar them up to a defined filename
+        try:
+            runfetchcmd("tar %s -czf %s %s" % (tar_flags, ud.localpath, os.path.basename(ud.pkgdir)), d)
+        except:
+            t, v, tb = sys.exc_info()
+            try:
+                os.unlink(ud.localpath)
+            except OSError:
+                pass
+            raise t, v, tb
+
+    def supports_srcrev(self):
+        return True
+
+    def _revision_key(self, url, ud, d):
+        """
+        Return a unique key for the url
+        """
+        return "bzr:" + ud.pkgdir
+
+    def _latest_revision(self, url, ud, d):
+        """
+        Return the latest upstream revision number
+        """
+        logger.debug(2, "BZR fetcher hitting network for %s", url)
+
+        output = runfetchcmd(self._buildbzrcommand(ud, d, "revno"), d, True)
+
+        return output.strip()
+
+    def _sortable_revision(self, url, ud, d):
+        """
+        Return a sortable revision number which in our case is the revision number
+        """
+
+        return self._build_revision(url, ud, d)
+
+    def _build_revision(self, url, ud, d):
+        return ud.revision

bitbake/lib/bb/fetch/cvs.py

@@ -0,0 +1,172 @@
+# ex:ts=4:sw=4:sts=4:et
+# -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*-
+"""
+BitBake 'Fetch' implementations
+
+Classes for obtaining upstream sources for the
+BitBake build tools.
+
+"""
+
+# Copyright (C) 2003, 2004  Chris Larson
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+#Based on functions from the base bb module, Copyright 2003 Holger Schurig
+#
+
+import os
+import logging
+import bb
+from   bb import data
+from bb.fetch import Fetch, FetchError, MissingParameterError, logger
+
+class Cvs(Fetch):
+    """
+    Class to fetch a module or modules from cvs repositories
+    """
+    def supports(self, url, ud, d):
+        """
+        Check to see if a given url can be fetched with cvs.
+        """
+        return ud.type in ['cvs']
+
+    def localpath(self, url, ud, d):
+        if not "module" in ud.parm:
+            raise MissingParameterError("cvs method needs a 'module' parameter")
+        ud.module = ud.parm["module"]
+
+        ud.tag = ud.parm.get('tag', "")
+
+        # Override the default date in certain cases
+        if 'date' in ud.parm:
+            ud.date = ud.parm['date']
+        elif ud.tag:
+            ud.date = ""
+
+        norecurse = ''
+        if 'norecurse' in ud.parm:
+            norecurse = '_norecurse'
+
+        fullpath = ''
+        if 'fullpath' in ud.parm:
+            fullpath = '_fullpath'
+
+        ud.localfile = data.expand('%s_%s_%s_%s%s%s.tar.gz' % (ud.module.replace('/', '.'), ud.host, ud.tag, ud.date, norecurse, fullpath), d)
+
+        return os.path.join(data.getVar("DL_DIR", d, True), ud.localfile)
+
+    def forcefetch(self, url, ud, d):
+        if (ud.date == "now"):
+            return True
+        return False
+
+    def go(self, loc, ud, d):
+
+        method = ud.parm.get('method', 'pserver')
+        localdir = ud.parm.get('localdir', ud.module)
+        cvs_port = ud.parm.get('port', '')
+
+        cvs_rsh = None
+        if method == "ext":
+            if "rsh" in ud.parm:
+                cvs_rsh = ud.parm["rsh"]
+
+        if method == "dir":
+            cvsroot = ud.path
+        else:
+            cvsroot = ":" + method
+            cvsproxyhost = data.getVar('CVS_PROXY_HOST', d, True)
+            if cvsproxyhost:
+                cvsroot += ";proxy=" + cvsproxyhost
+            cvsproxyport = data.getVar('CVS_PROXY_PORT', d, True)
+            if cvsproxyport:
+                cvsroot += ";proxyport=" + cvsproxyport
+            cvsroot += ":" + ud.user
+            if ud.pswd:
+                cvsroot += ":" + ud.pswd
+            cvsroot += "@" + ud.host + ":" + cvs_port + ud.path
+
+        options = []
+        if 'norecurse' in ud.parm:
+            options.append("-l")
+        if ud.date:
+            # treat YYYYMMDDHHMM specially for CVS
+            if len(ud.date) == 12:
+                options.append("-D \"%s %s:%s UTC\"" % (ud.date[0:8], ud.date[8:10], ud.date[10:12]))
+            else:
+                options.append("-D \"%s UTC\"" % ud.date)
+        if ud.tag:
+            options.append("-r %s" % ud.tag)
+
+        localdata = data.createCopy(d)
+        data.setVar('OVERRIDES', "cvs:%s" % data.getVar('OVERRIDES', localdata), localdata)
+        data.update_data(localdata)
+
+        data.setVar('CVSROOT', cvsroot, localdata)
+        data.setVar('CVSCOOPTS', " ".join(options), localdata)
+        data.setVar('CVSMODULE', ud.module, localdata)
+        cvscmd = data.getVar('FETCHCOMMAND', localdata, 1)
+        cvsupdatecmd = data.getVar('UPDATECOMMAND', localdata, 1)
+
+        if cvs_rsh:
+            cvscmd = "CVS_RSH=\"%s\" %s" % (cvs_rsh, cvscmd)
+            cvsupdatecmd = "CVS_RSH=\"%s\" %s" % (cvs_rsh, cvsupdatecmd)
+
+        # create module directory
+        logger.debug(2, "Fetch: checking for module directory")
+        pkg = data.expand('${PN}', d)
+        pkgdir = os.path.join(data.expand('${CVSDIR}', localdata), pkg)
+        moddir = os.path.join(pkgdir, localdir)
+        if os.access(os.path.join(moddir, 'CVS'), os.R_OK):
+            logger.info("Update " + loc)
+            # update sources there
+            os.chdir(moddir)
+            myret = os.system(cvsupdatecmd)
+        else:
+            logger.info("Fetch " + loc)
+            # check out sources there
+            bb.utils.mkdirhier(pkgdir)
+            os.chdir(pkgdir)
+            logger.debug(1, "Running %s", cvscmd)
+            myret = os.system(cvscmd)
+
+        if myret != 0 or not os.access(moddir, os.R_OK):
+            try:
+                os.rmdir(moddir)
+            except OSError:
+                pass
+            raise FetchError(ud.module)
+
+        scmdata = ud.parm.get("scmdata", "")
+        if scmdata == "keep":
+            tar_flags = ""
+        else:
+            tar_flags = "--exclude 'CVS'"
+
+        # tar them up to a defined filename
+        if 'fullpath' in ud.parm:
+            os.chdir(pkgdir)
+            myret = os.system("tar %s -czf %s %s" % (tar_flags, ud.localpath, localdir))
+        else:
+            os.chdir(moddir)
+            os.chdir('..')
+            myret = os.system("tar %s -czf %s %s" % (tar_flags, ud.localpath, os.path.basename(moddir)))
+
+        if myret != 0:
+            try:
+                os.unlink(ud.localpath)
+            except OSError:
+                pass
+            raise FetchError(ud.module)

bitbake/lib/bb/fetch/git.py

@@ -0,0 +1,339 @@
+# ex:ts=4:sw=4:sts=4:et
+# -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*-
+"""
+BitBake 'Fetch' git implementation
+
+"""
+
+#Copyright (C) 2005 Richard Purdie
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+
+import os
+import bb
+import bb.persist_data
+from   bb    import data
+from   bb.fetch import Fetch
+from   bb.fetch import runfetchcmd
+from   bb.fetch import logger
+
+class Git(Fetch):
+    """Class to fetch a module or modules from git repositories"""
+    def init(self, d):
+        #
+        # Only enable _sortable revision if the key is set
+        #
+        if bb.data.getVar("BB_GIT_CLONE_FOR_SRCREV", d, True):
+            self._sortable_buildindex = self._sortable_buildindex_disabled
+    def supports(self, url, ud, d):
+        """
+        Check to see if a given url can be fetched with git.
+        """
+        return ud.type in ['git']
+
+    def localpath(self, url, ud, d):
+
+        if 'protocol' in ud.parm:
+            ud.proto = ud.parm['protocol']
+        elif not ud.host:
+            ud.proto = 'file'
+        else:
+            ud.proto = "rsync"
+
+        ud.branch = ud.parm.get("branch", "master")
+
+        gitsrcname = '%s%s' % (ud.host, ud.path.replace('/', '.'))
+        ud.mirrortarball = 'git_%s.tar.gz' % (gitsrcname)
+        ud.clonedir = os.path.join(data.expand('${GITDIR}', d), gitsrcname)
+
+        tag = Fetch.srcrev_internal_helper(ud, d)
+        if tag is True:
+            ud.tag = self.latest_revision(url, ud, d)
+        elif tag:
+            ud.tag = tag
+
+        if not ud.tag or ud.tag == "master":
+            ud.tag = self.latest_revision(url, ud, d)
+
+        subdir = ud.parm.get("subpath", "")
+        if subdir != "":
+            if subdir.endswith("/"):
+                subdir = subdir[:-1]
+            subdirpath = os.path.join(ud.path, subdir);
+        else:
+            subdirpath = ud.path;
+
+        if 'fullclone' in ud.parm:
+            ud.localfile = ud.mirrortarball
+        else:
+            ud.localfile = data.expand('git_%s%s_%s.tar.gz' % (ud.host, subdirpath.replace('/', '.'), ud.tag), d)
+
+        ud.basecmd = data.getVar("FETCHCMD_git", d, True) or "git"
+
+        if 'noclone' in ud.parm:
+            ud.localfile = None
+            return None
+
+        return os.path.join(data.getVar("DL_DIR", d, True), ud.localfile)
+
+    def forcefetch(self, url, ud, d):
+        if 'fullclone' in ud.parm:
+            return True
+        if 'noclone' in ud.parm:
+            return False
+        if os.path.exists(ud.localpath):
+            return False
+        if not self._contains_ref(ud.tag, d):
+            return True
+        return False
+
+    def try_premirror(self, u, ud, d):
+        if 'noclone' in ud.parm:
+            return False
+        if os.path.exists(ud.clonedir):
+            return False
+        if os.path.exists(ud.localpath):
+            return False
+
+        return True
+
+    def go(self, loc, ud, d):
+        """Fetch url"""
+
+        if ud.user:
+            username = ud.user + '@'
+        else:
+            username = ""
+
+        repofile = os.path.join(data.getVar("DL_DIR", d, 1), ud.mirrortarball)
+
+
+        coname = '%s' % (ud.tag)
+        codir = os.path.join(ud.clonedir, coname)
+
+        # If we have no existing clone and no mirror tarball, try and obtain one
+        if not os.path.exists(ud.clonedir) and not os.path.exists(repofile):
+            try:
+                Fetch.try_mirrors(ud.mirrortarball)
+            except:
+                pass
+
+        # If the checkout doesn't exist and the mirror tarball does, extract it
+        if not os.path.exists(ud.clonedir) and os.path.exists(repofile):
+            bb.utils.mkdirhier(ud.clonedir)
+            os.chdir(ud.clonedir)
+            runfetchcmd("tar -xzf %s" % (repofile), d)
+
+        # If the repo still doesn't exist, fallback to cloning it
+        if not os.path.exists(ud.clonedir):
+            runfetchcmd("%s clone -n %s://%s%s%s %s" % (ud.basecmd, ud.proto, username, ud.host, ud.path, ud.clonedir), d)
+
+        os.chdir(ud.clonedir)
+        # Update the checkout if needed
+        if not self._contains_ref(ud.tag, d) or 'fullclone' in ud.parm:
+            # Remove all but the .git directory
+            runfetchcmd("rm * -Rf", d)
+            if 'fullclone' in ud.parm:
+                runfetchcmd("%s fetch --all" % (ud.basecmd), d)
+            else:
+                runfetchcmd("%s fetch %s://%s%s%s %s" % (ud.basecmd, ud.proto, username, ud.host, ud.path, ud.branch), d)
+            runfetchcmd("%s fetch --tags %s://%s%s%s" % (ud.basecmd, ud.proto, username, ud.host, ud.path), d)
+            runfetchcmd("%s prune-packed" % ud.basecmd, d)
+            runfetchcmd("%s pack-redundant --all | xargs -r rm" % ud.basecmd, d)
+
+        # Generate a mirror tarball if needed
+        os.chdir(ud.clonedir)
+        mirror_tarballs = data.getVar("BB_GENERATE_MIRROR_TARBALLS", d, True)
+        if mirror_tarballs != "0" or 'fullclone' in ud.parm:
+            logger.info("Creating tarball of git repository")
+            runfetchcmd("tar -czf %s %s" % (repofile, os.path.join(".", ".git", "*") ), d)
+
+        if 'fullclone' in ud.parm:
+            return
+
+        if os.path.exists(codir):
+            bb.utils.prunedir(codir)
+
+        subdir = ud.parm.get("subpath", "")
+        if subdir != "":
+            if subdir.endswith("/"):
+                subdirbase = os.path.basename(subdir[:-1])
+            else:
+                subdirbase = os.path.basename(subdir)
+        else:
+            subdirbase = ""
+
+        if subdir != "":
+            readpathspec = ":%s" % (subdir)
+            codir = os.path.join(codir, "git")
+            coprefix = os.path.join(codir, subdirbase, "")
+        else:
+            readpathspec = ""
+            coprefix = os.path.join(codir, "git", "")
+
+        scmdata = ud.parm.get("scmdata", "")
+        if scmdata == "keep":
+            runfetchcmd("%s clone -n %s %s" % (ud.basecmd, ud.clonedir, coprefix), d)
+            os.chdir(coprefix)
+            runfetchcmd("%s checkout -q -f %s%s" % (ud.basecmd, ud.tag, readpathspec), d)
+        else:
+            bb.utils.mkdirhier(codir)
+            os.chdir(ud.clonedir)
+            runfetchcmd("%s read-tree %s%s" % (ud.basecmd, ud.tag, readpathspec), d)
+            runfetchcmd("%s checkout-index -q -f --prefix=%s -a" % (ud.basecmd, coprefix), d)
+
+        os.chdir(codir)
+        logger.info("Creating tarball of git checkout")
+        runfetchcmd("tar -czf %s %s" % (ud.localpath, os.path.join(".", "*") ), d)
+
+        os.chdir(ud.clonedir)
+        bb.utils.prunedir(codir)
+
+    def supports_srcrev(self):
+        return True
+
+    def _contains_ref(self, tag, d):
+        basecmd = data.getVar("FETCHCMD_git", d, True) or "git"
+        output = runfetchcmd("%s log --pretty=oneline -n 1 %s -- 2> /dev/null | wc -l" % (basecmd, tag), d, quiet=True)
+        return output.split()[0] != "0"
+
+    def _revision_key(self, url, ud, d, branch=False):
+        """
+        Return a unique key for the url
+        """
+        key = 'git:' + ud.host + ud.path.replace('/', '.')
+        if branch:
+            return key + ud.branch
+        else:
+            return key
+
+    def generate_revision_key(self, url, ud, d, branch=False):
+        key = self._revision_key(url, ud, d, branch)
+        return "%s-%s" % (key, bb.data.getVar("PN", d, True) or "")
+
+    def _latest_revision(self, url, ud, d):
+        """
+        Compute the HEAD revision for the url
+        """
+        if ud.user:
+            username = ud.user + '@'
+        else:
+            username = ""
+
+        basecmd = data.getVar("FETCHCMD_git", d, True) or "git"
+        cmd = "%s ls-remote %s://%s%s%s %s" % (basecmd, ud.proto, username, ud.host, ud.path, ud.branch)
+        output = runfetchcmd(cmd, d, True)
+        if not output:
+            raise bb.fetch.FetchError("Fetch command %s gave empty output\n" % (cmd))
+        return output.split()[0]
+
+    def latest_revision(self, url, ud, d):
+        """
+        Look in the cache for the latest revision, if not present ask the SCM.
+        """
+        revs = bb.persist_data.persist('BB_URI_HEADREVS', d)
+
+        key = self.generate_revision_key(url, ud, d, branch=True)
+
+        try:
+            return revs[key]
+        except KeyError:
+            # Compatibility with old key format, no branch included
+            oldkey = self.generate_revision_key(url, ud, d, branch=False)
+            try:
+                rev = revs[oldkey]
+            except KeyError:
+                rev = self._latest_revision(url, ud, d)
+            else:
+                del revs[oldkey]
+            revs[key] = rev
+            return rev
+
+    def sortable_revision(self, url, ud, d):
+        """
+
+        """
+        localcounts = bb.persist_data.persist('BB_URI_LOCALCOUNT', d)
+        key = self.generate_revision_key(url, ud, d, branch=True)
+        oldkey = self.generate_revision_key(url, ud, d, branch=False)
+
+        latest_rev = self._build_revision(url, ud, d)
+        last_rev = localcounts.get(key + '_rev')
+        if last_rev is None:
+            last_rev = localcounts.get(oldkey + '_rev')
+            if last_rev is not None:
+                del localcounts[oldkey + '_rev']
+                localcounts[key + '_rev'] = last_rev
+
+        uselocalcount = bb.data.getVar("BB_LOCALCOUNT_OVERRIDE", d, True) or False
+        count = None
+        if uselocalcount:
+            count = Fetch.localcount_internal_helper(ud, d)
+        if count is None:
+            count = localcounts.get(key + '_count')
+        if count is None:
+            count = localcounts.get(oldkey + '_count')
+            if count is not None:
+                del localcounts[oldkey + '_count']
+                localcounts[key + '_count'] = count
+
+        if last_rev == latest_rev:
+            return str(count + "+" + latest_rev)
+
+        buildindex_provided = hasattr(self, "_sortable_buildindex")
+        if buildindex_provided:
+            count = self._sortable_buildindex(url, ud, d, latest_rev)
+        if count is None:
+            count = "0"
+        elif uselocalcount or buildindex_provided:
+            count = str(count)
+        else:
+            count = str(int(count) + 1)
+
+        localcounts[key + '_rev'] = latest_rev
+        localcounts[key + '_count'] = count
+
+        return str(count + "+" + latest_rev)
+
+    def _build_revision(self, url, ud, d):
+        return ud.tag
+
+    def _sortable_buildindex_disabled(self, url, ud, d, rev):
+        """
+        Return a suitable buildindex for the revision specified. This is done by counting revisions
+        using "git rev-list" which may or may not work in different circumstances.
+        """
+
+        cwd = os.getcwd()
+
+        # Check if we have the rev already
+
+        if not os.path.exists(ud.clonedir):
+            print("no repo")
+            self.go(None, ud, d)
+            if not os.path.exists(ud.clonedir):
+                logger.error("GIT repository for %s doesn't exist in %s, cannot get sortable buildnumber, using old value", url, ud.clonedir)
+                return None
+
+
+        os.chdir(ud.clonedir)
+        if not self._contains_ref(rev, d):
+            self.go(None, ud, d)
+
+        output = runfetchcmd("%s rev-list %s -- 2> /dev/null | wc -l" % (ud.basecmd, rev), d, quiet=True)
+        os.chdir(cwd)
+
+        buildindex = "%s" % output.split()[0]
+        logger.debug(1, "GIT repository for %s in %s is returning %s revisions in rev-list before %s", url, ud.clonedir, buildindex, rev)
+        return buildindex

bitbake/lib/bb/fetch/hg.py

@@ -0,0 +1,180 @@
+# ex:ts=4:sw=4:sts=4:et
+# -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*-
+"""
+BitBake 'Fetch' implementation for mercurial DRCS (hg).
+
+"""
+
+# Copyright (C) 2003, 2004  Chris Larson
+# Copyright (C) 2004        Marcin Juszkiewicz
+# Copyright (C) 2007        Robert Schuster
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Based on functions from the base bb module, Copyright 2003 Holger Schurig
+
+import os
+import sys
+import logging
+import bb
+from bb import data
+from bb.fetch import Fetch
+from bb.fetch import FetchError
+from bb.fetch import MissingParameterError
+from bb.fetch import runfetchcmd
+from bb.fetch import logger
+
+class Hg(Fetch):
+    """Class to fetch from mercurial repositories"""
+    def supports(self, url, ud, d):
+        """
+        Check to see if a given url can be fetched with mercurial.
+        """
+        return ud.type in ['hg']
+
+    def forcefetch(self, url, ud, d):
+        revTag = ud.parm.get('rev', 'tip')
+        return revTag == "tip"
+
+    def localpath(self, url, ud, d):
+        if not "module" in ud.parm:
+            raise MissingParameterError("hg method needs a 'module' parameter")
+
+        ud.module = ud.parm["module"]
+
+        # Create paths to mercurial checkouts
+        relpath = self._strip_leading_slashes(ud.path)
+        ud.pkgdir = os.path.join(data.expand('${HGDIR}', d), ud.host, relpath)
+        ud.moddir = os.path.join(ud.pkgdir, ud.module)
+
+        if 'rev' in ud.parm:
+            ud.revision = ud.parm['rev']
+        else:
+            tag = Fetch.srcrev_internal_helper(ud, d)
+            if tag is True:
+                ud.revision = self.latest_revision(url, ud, d)
+            elif tag:
+                ud.revision = tag
+            else:
+                ud.revision = self.latest_revision(url, ud, d)
+
+        ud.localfile = data.expand('%s_%s_%s_%s.tar.gz' % (ud.module.replace('/', '.'), ud.host, ud.path.replace('/', '.'), ud.revision), d)
+
+        return os.path.join(data.getVar("DL_DIR", d, True), ud.localfile)
+
+    def _buildhgcommand(self, ud, d, command):
+        """
+        Build up an hg commandline based on ud
+        command is "fetch", "update", "info"
+        """
+
+        basecmd = data.expand('${FETCHCMD_hg}', d)
+
+        proto = ud.parm.get('proto', 'http')
+
+        host = ud.host
+        if proto == "file":
+            host = "/"
+            ud.host = "localhost"
+
+        if not ud.user:
+            hgroot = host + ud.path
+        else:
+            hgroot = ud.user + "@" + host + ud.path
+
+        if command is "info":
+            return "%s identify -i %s://%s/%s" % (basecmd, proto, hgroot, ud.module)
+
+        options = [];
+        if ud.revision:
+            options.append("-r %s" % ud.revision)
+
+        if command is "fetch":
+            cmd = "%s clone %s %s://%s/%s %s" % (basecmd, " ".join(options), proto, hgroot, ud.module, ud.module)
+        elif command is "pull":
+            # do not pass options list; limiting pull to rev causes the local
+            # repo not to contain it and immediately following "update" command
+            # will crash
+            cmd = "%s pull" % (basecmd)
+        elif command is "update":
+            cmd = "%s update -C %s" % (basecmd, " ".join(options))
+        else:
+            raise FetchError("Invalid hg command %s" % command)
+
+        return cmd
+
+    def go(self, loc, ud, d):
+        """Fetch url"""
+
+        logger.debug(2, "Fetch: checking for module directory '" + ud.moddir + "'")
+
+        if os.access(os.path.join(ud.moddir, '.hg'), os.R_OK):
+            updatecmd = self._buildhgcommand(ud, d, "pull")
+            logger.info("Update " + loc)
+            # update sources there
+            os.chdir(ud.moddir)
+            logger.debug(1, "Running %s", updatecmd)
+            runfetchcmd(updatecmd, d)
+
+        else:
+            fetchcmd = self._buildhgcommand(ud, d, "fetch")
+            logger.info("Fetch " + loc)
+            # check out sources there
+            bb.utils.mkdirhier(ud.pkgdir)
+            os.chdir(ud.pkgdir)
+            logger.debug(1, "Running %s", fetchcmd)
+            runfetchcmd(fetchcmd, d)
+
+        # Even when we clone (fetch), we still need to update as hg's clone
+        # won't checkout the specified revision if its on a branch
+        updatecmd = self._buildhgcommand(ud, d, "update")
+        os.chdir(ud.moddir)
+        logger.debug(1, "Running %s", updatecmd)
+        runfetchcmd(updatecmd, d)
+
+        scmdata = ud.parm.get("scmdata", "")
+        if scmdata == "keep":
+            tar_flags = ""
+        else:
+            tar_flags = "--exclude '.hg' --exclude '.hgrags'"
+
+        os.chdir(ud.pkgdir)
+        try:
+            runfetchcmd("tar %s -czf %s %s" % (tar_flags, ud.localpath, ud.module), d)
+        except:
+            t, v, tb = sys.exc_info()
+            try:
+                os.unlink(ud.localpath)
+            except OSError:
+                pass
+            raise t, v, tb
+
+    def supports_srcrev(self):
+        return True
+
+    def _latest_revision(self, url, ud, d):
+        """
+        Compute tip revision for the url
+        """
+        output = runfetchcmd(self._buildhgcommand(ud, d, "info"), d)
+        return output.strip()
+
+    def _build_revision(self, url, ud, d):
+        return ud.revision
+
+    def _revision_key(self, url, ud, d):
+        """
+        Return a unique key for the url
+        """
+        return "hg:" + ud.moddir

bitbake/lib/bb/fetch/local.py

@@ -0,0 +1,73 @@
+# ex:ts=4:sw=4:sts=4:et
+# -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*-
+"""
+BitBake 'Fetch' implementations
+
+Classes for obtaining upstream sources for the
+BitBake build tools.
+
+"""
+
+# Copyright (C) 2003, 2004  Chris Larson
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Based on functions from the base bb module, Copyright 2003 Holger Schurig
+
+import os
+import bb
+import bb.utils
+from   bb import data
+from   bb.fetch import Fetch
+
+class Local(Fetch):
+    def supports(self, url, urldata, d):
+        """
+        Check to see if a given url represents a local fetch.
+        """
+        return urldata.type in ['file']
+
+    def localpath(self, url, urldata, d):
+        """
+        Return the local filename of a given url assuming a successful fetch.
+        """
+        path = url.split("://")[1]
+        path = path.split(";")[0]
+        newpath = path
+        if path[0] != "/":
+            filespath = data.getVar('FILESPATH', d, 1)
+            if filespath:
+                newpath = bb.utils.which(filespath, path)
+            if not newpath:
+                filesdir = data.getVar('FILESDIR', d, 1)
+                if filesdir:
+                    newpath = os.path.join(filesdir, path)
+        # We don't set localfile as for this fetcher the file is already local!
+        return newpath
+
+    def go(self, url, urldata, d):
+        """Fetch urls (no-op for Local method)"""
+        # no need to fetch local files, we'll deal with them in place.
+        return 1
+
+    def checkstatus(self, url, urldata, d):
+        """
+        Check the status of the url
+        """
+        if urldata.localpath.find("*") != -1:
+            logger.info("URL %s looks like a glob and was therefore not checked.", url)
+            return True
+        if os.path.exists(urldata.localpath):
+            return True
+        return False

bitbake/lib/bb/fetch/osc.py

@@ -0,0 +1,143 @@
+# ex:ts=4:sw=4:sts=4:et
+# -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*-
+"""
+Bitbake "Fetch" implementation for osc (Opensuse build service client).
+Based on the svn "Fetch" implementation.
+
+"""
+
+import  os
+import  sys
+import logging
+import  bb
+from    bb       import data
+from    bb       import utils
+from    bb.fetch import Fetch
+from    bb.fetch import FetchError
+from    bb.fetch import MissingParameterError
+from    bb.fetch import runfetchcmd
+
+class Osc(Fetch):
+    """Class to fetch a module or modules from Opensuse build server
+       repositories."""
+
+    def supports(self, url, ud, d):
+        """
+        Check to see if a given url can be fetched with osc.
+        """
+        return ud.type in ['osc']
+
+    def localpath(self, url, ud, d):
+        if not "module" in ud.parm:
+            raise MissingParameterError("osc method needs a 'module' parameter.")
+
+        ud.module = ud.parm["module"]
+
+        # Create paths to osc checkouts
+        relpath = self._strip_leading_slashes(ud.path)
+        ud.pkgdir = os.path.join(data.expand('${OSCDIR}', d), ud.host)
+        ud.moddir = os.path.join(ud.pkgdir, relpath, ud.module)
+
+        if 'rev' in ud.parm:
+            ud.revision = ud.parm['rev']
+        else:
+            pv = data.getVar("PV", d, 0)
+            rev = Fetch.srcrev_internal_helper(ud, d)
+            if rev and rev != True:
+                ud.revision = rev
+            else:
+                ud.revision = ""
+
+        ud.localfile = data.expand('%s_%s_%s.tar.gz' % (ud.module.replace('/', '.'), ud.path.replace('/', '.'), ud.revision), d)
+
+        return os.path.join(data.getVar("DL_DIR", d, True), ud.localfile)
+
+    def _buildosccommand(self, ud, d, command):
+        """
+        Build up an ocs commandline based on ud
+        command is "fetch", "update", "info"
+        """
+
+        basecmd = data.expand('${FETCHCMD_osc}', d)
+
+        proto = ud.parm.get('proto', 'ocs')
+
+        options = []
+
+        config = "-c %s" % self.generate_config(ud, d)
+
+        if ud.revision:
+            options.append("-r %s" % ud.revision)
+
+        coroot = self._strip_leading_slashes(ud.path)
+
+        if command is "fetch":
+            osccmd = "%s %s co %s/%s %s" % (basecmd, config, coroot, ud.module, " ".join(options))
+        elif command is "update":
+            osccmd = "%s %s up %s" % (basecmd, config, " ".join(options))
+        else:
+            raise FetchError("Invalid osc command %s" % command)
+
+        return osccmd
+
+    def go(self, loc, ud, d):
+        """
+        Fetch url
+        """
+
+        logger.debug(2, "Fetch: checking for module directory '" + ud.moddir + "'")
+
+        if os.access(os.path.join(data.expand('${OSCDIR}', d), ud.path, ud.module), os.R_OK):
+            oscupdatecmd = self._buildosccommand(ud, d, "update")
+            logger.info("Update "+ loc)
+            # update sources there
+            os.chdir(ud.moddir)
+            logger.debug(1, "Running %s", oscupdatecmd)
+            runfetchcmd(oscupdatecmd, d)
+        else:
+            oscfetchcmd = self._buildosccommand(ud, d, "fetch")
+            logger.info("Fetch " + loc)
+            # check out sources there
+            bb.utils.mkdirhier(ud.pkgdir)
+            os.chdir(ud.pkgdir)
+            logger.debug(1, "Running %s", oscfetchcmd)
+            runfetchcmd(oscfetchcmd, d)
+
+        os.chdir(os.path.join(ud.pkgdir + ud.path))
+        # tar them up to a defined filename
+        try:
+            runfetchcmd("tar -czf %s %s" % (ud.localpath, ud.module), d)
+        except:
+            t, v, tb = sys.exc_info()
+            try:
+                os.unlink(ud.localpath)
+            except OSError:
+                pass
+            raise t, v, tb
+
+    def supports_srcrev(self):
+        return False
+
+    def generate_config(self, ud, d):
+        """
+        Generate a .oscrc to be used for this run.
+        """
+
+        config_path = os.path.join(data.expand('${OSCDIR}', d), "oscrc")
+        bb.utils.remove(config_path)
+
+        f = open(config_path, 'w')
+        f.write("[general]\n")
+        f.write("apisrv = %s\n" % ud.host)
+        f.write("scheme = http\n")
+        f.write("su-wrapper = su -c\n")
+        f.write("build-root = %s\n" % data.expand('${WORKDIR}', d))
+        f.write("urllist = http://moblin-obs.jf.intel.com:8888/build/%(project)s/%(repository)s/%(buildarch)s/:full/%(name)s.rpm\n")
+        f.write("extra-pkgs = gzip\n")
+        f.write("\n")
+        f.write("[%s]\n" % ud.host)
+        f.write("user = %s\n" % ud.parm["user"])
+        f.write("pass = %s\n" % ud.parm["pswd"])
+        f.close()
+
+        return config_path

bitbake/lib/bb/fetch/perforce.py

@@ -0,0 +1,206 @@
+# ex:ts=4:sw=4:sts=4:et
+# -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*-
+"""
+BitBake 'Fetch' implementations
+
+Classes for obtaining upstream sources for the
+BitBake build tools.
+
+"""
+
+# Copyright (C) 2003, 2004  Chris Larson
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Based on functions from the base bb module, Copyright 2003 Holger Schurig
+
+from future_builtins import zip
+import os
+import logging
+import bb
+from   bb import data
+from   bb.fetch import Fetch
+from   bb.fetch import FetchError
+from   bb.fetch import logger
+
+class Perforce(Fetch):
+    def supports(self, url, ud, d):
+        return ud.type in ['p4']
+
+    def doparse(url, d):
+        parm = {}
+        path = url.split("://")[1]
+        delim = path.find("@");
+        if delim != -1:
+            (user, pswd, host, port) = path.split('@')[0].split(":")
+            path = path.split('@')[1]
+        else:
+            (host, port) = data.getVar('P4PORT', d).split(':')
+            user = ""
+            pswd = ""
+
+        if path.find(";") != -1:
+            keys=[]
+            values=[]
+            plist = path.split(';')
+            for item in plist:
+                if item.count('='):
+                    (key, value) = item.split('=')
+                    keys.append(key)
+                    values.append(value)
+
+            parm = dict(zip(keys, values))
+        path = "//" + path.split(';')[0]
+        host += ":%s" % (port)
+        parm["cset"] = Perforce.getcset(d, path, host, user, pswd, parm)
+
+        return host, path, user, pswd, parm
+    doparse = staticmethod(doparse)
+
+    def getcset(d, depot, host, user, pswd, parm):
+        p4opt = ""
+        if "cset" in parm:
+            return parm["cset"];
+        if user:
+            p4opt += " -u %s" % (user)
+        if pswd:
+            p4opt += " -P %s" % (pswd)
+        if host:
+            p4opt += " -p %s" % (host)
+
+        p4date = data.getVar("P4DATE", d, 1)
+        if "revision" in parm:
+            depot += "#%s" % (parm["revision"])
+        elif "label" in parm:
+            depot += "@%s" % (parm["label"])
+        elif p4date:
+            depot += "@%s" % (p4date)
+
+        p4cmd = data.getVar('FETCHCOMMAND_p4', d, 1)
+        logger.debug(1, "Running %s%s changes -m 1 %s", p4cmd, p4opt, depot)
+        p4file = os.popen("%s%s changes -m 1 %s" % (p4cmd, p4opt, depot))
+        cset = p4file.readline().strip()
+        logger.debug(1, "READ %s", cset)
+        if not cset:
+            return -1
+
+        return cset.split(' ')[1]
+    getcset = staticmethod(getcset)
+
+    def localpath(self, url, ud, d):
+
+        (host, path, user, pswd, parm) = Perforce.doparse(url, d)
+
+        # If a label is specified, we use that as our filename
+
+        if "label" in parm:
+            ud.localfile = "%s.tar.gz" % (parm["label"])
+            return os.path.join(data.getVar("DL_DIR", d, 1), ud.localfile)
+
+        base = path
+        which = path.find('/...')
+        if which != -1:
+            base = path[:which]
+
+        base = self._strip_leading_slashes(base)
+
+        cset = Perforce.getcset(d, path, host, user, pswd, parm)
+
+        ud.localfile = data.expand('%s+%s+%s.tar.gz' % (host, base.replace('/', '.'), cset), d)
+
+        return os.path.join(data.getVar("DL_DIR", d, 1), ud.localfile)
+
+    def go(self, loc, ud, d):
+        """
+        Fetch urls
+        """
+
+        (host, depot, user, pswd, parm) = Perforce.doparse(loc, d)
+
+        if depot.find('/...') != -1:
+            path = depot[:depot.find('/...')]
+        else:
+            path = depot
+
+        module = parm.get('module', os.path.basename(path))
+
+        localdata = data.createCopy(d)
+        data.setVar('OVERRIDES', "p4:%s" % data.getVar('OVERRIDES', localdata), localdata)
+        data.update_data(localdata)
+
+        # Get the p4 command
+        p4opt = ""
+        if user:
+            p4opt += " -u %s" % (user)
+
+        if pswd:
+            p4opt += " -P %s" % (pswd)
+
+        if host:
+            p4opt += " -p %s" % (host)
+
+        p4cmd = data.getVar('FETCHCOMMAND', localdata, 1)
+
+        # create temp directory
+        logger.debug(2, "Fetch: creating temporary directory")
+        bb.utils.mkdirhier(data.expand('${WORKDIR}', localdata))
+        data.setVar('TMPBASE', data.expand('${WORKDIR}/oep4.XXXXXX', localdata), localdata)
+        tmppipe = os.popen(data.getVar('MKTEMPDIRCMD', localdata, 1) or "false")
+        tmpfile = tmppipe.readline().strip()
+        if not tmpfile:
+            logger.error("Fetch: unable to create temporary directory.. make sure 'mktemp' is in the PATH.")
+            raise FetchError(module)
+
+        if "label" in parm:
+            depot = "%s@%s" % (depot, parm["label"])
+        else:
+            cset = Perforce.getcset(d, depot, host, user, pswd, parm)
+            depot = "%s@%s" % (depot, cset)
+
+        os.chdir(tmpfile)
+        logger.info("Fetch " + loc)
+        logger.info("%s%s files %s", p4cmd, p4opt, depot)
+        p4file = os.popen("%s%s files %s" % (p4cmd, p4opt, depot))
+
+        if not p4file:
+            logger.error("Fetch: unable to get the P4 files from %s", depot)
+            raise FetchError(module)
+
+        count = 0
+
+        for file in p4file:
+            list = file.split()
+
+            if list[2] == "delete":
+                continue
+
+            dest = list[0][len(path)+1:]
+            where = dest.find("#")
+
+            os.system("%s%s print -o %s/%s %s" % (p4cmd, p4opt, module, dest[:where], list[0]))
+            count = count + 1
+
+        if count == 0:
+            logger.error("Fetch:  No files gathered from the P4 fetch")
+            raise FetchError(module)
+
+        myret = os.system("tar -czf %s %s" % (ud.localpath, module))
+        if myret != 0:
+            try:
+                os.unlink(ud.localpath)
+            except OSError:
+                pass
+            raise FetchError(module)
+        # cleanup
+        bb.utils.prunedir(tmpfile)

bitbake/lib/bb/fetch/repo.py

@@ -0,0 +1,98 @@
+# ex:ts=4:sw=4:sts=4:et
+# -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*-
+"""
+BitBake "Fetch" repo (git) implementation
+
+"""
+
+# Copyright (C) 2009 Tom Rini <trini@embeddedalley.com>
+#
+# Based on git.py which is:
+#Copyright (C) 2005 Richard Purdie
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+
+import os
+import bb
+from   bb    import data
+from   bb.fetch import Fetch
+from   bb.fetch import runfetchcmd
+
+class Repo(Fetch):
+    """Class to fetch a module or modules from repo (git) repositories"""
+    def supports(self, url, ud, d):
+        """
+        Check to see if a given url can be fetched with repo.
+        """
+        return ud.type in ["repo"]
+
+    def localpath(self, url, ud, d):
+        """
+        We don"t care about the git rev of the manifests repository, but
+        we do care about the manifest to use.  The default is "default".
+        We also care about the branch or tag to be used.  The default is
+        "master".
+        """
+
+        ud.proto = ud.parm.get('protocol', 'git')
+        ud.branch = ud.parm.get('branch', 'master')
+        ud.manifest = ud.parm.get('manifest', 'default.xml')
+        if not ud.manifest.endswith('.xml'):
+            ud.manifest += '.xml'
+
+        ud.localfile = data.expand("repo_%s%s_%s_%s.tar.gz" % (ud.host, ud.path.replace("/", "."), ud.manifest, ud.branch), d)
+
+        return os.path.join(data.getVar("DL_DIR", d, True), ud.localfile)
+
+    def go(self, loc, ud, d):
+        """Fetch url"""
+
+        if os.access(os.path.join(data.getVar("DL_DIR", d, True), ud.localfile), os.R_OK):
+            logger.debug(1, "%s already exists (or was stashed). Skipping repo init / sync.", ud.localpath)
+            return
+
+        gitsrcname = "%s%s" % (ud.host, ud.path.replace("/", "."))
+        repodir = data.getVar("REPODIR", d, True) or os.path.join(data.getVar("DL_DIR", d, True), "repo")
+        codir = os.path.join(repodir, gitsrcname, ud.manifest)
+
+        if ud.user:
+            username = ud.user + "@"
+        else:
+            username = ""
+
+        bb.utils.mkdirhier(os.path.join(codir, "repo"))
+        os.chdir(os.path.join(codir, "repo"))
+        if not os.path.exists(os.path.join(codir, "repo", ".repo")):
+            runfetchcmd("repo init -m %s -b %s -u %s://%s%s%s" % (ud.manifest, ud.branch, ud.proto, username, ud.host, ud.path), d)
+
+        runfetchcmd("repo sync", d)
+        os.chdir(codir)
+
+        scmdata = ud.parm.get("scmdata", "")
+        if scmdata == "keep":
+            tar_flags = ""
+        else:
+            tar_flags = "--exclude '.repo' --exclude '.git'"
+
+        # Create a cache
+        runfetchcmd("tar %s -czf %s %s" % (tar_flags, ud.localpath, os.path.join(".", "*") ), d)
+
+    def supports_srcrev(self):
+        return False
+
+    def _build_revision(self, url, ud, d):
+        return ud.manifest
+
+    def _want_sortable_revision(self, url, ud, d):
+        return False

bitbake/lib/bb/fetch/ssh.py

@@ -0,0 +1,118 @@
+# ex:ts=4:sw=4:sts=4:et
+# -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*-
+'''
+BitBake 'Fetch' implementations
+
+This implementation is for Secure Shell (SSH), and attempts to comply with the
+IETF secsh internet draft:
+    http://tools.ietf.org/wg/secsh/draft-ietf-secsh-scp-sftp-ssh-uri/
+
+    Currently does not support the sftp parameters, as this uses scp
+    Also does not support the 'fingerprint' connection parameter.
+
+'''
+
+# Copyright (C) 2006  OpenedHand Ltd.
+#
+#
+# Based in part on svk.py:
+#    Copyright (C) 2006 Holger Hans Peter Freyther
+#    Based on svn.py:
+#        Copyright (C) 2003, 2004  Chris Larson
+#        Based on functions from the base bb module:
+#            Copyright 2003 Holger Schurig
+#
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+
+import re, os
+from   bb import data
+from   bb.fetch import Fetch
+from   bb.fetch import FetchError
+
+
+__pattern__ = re.compile(r'''
+ \s*                 # Skip leading whitespace
+ ssh://              # scheme
+ (                   # Optional username/password block
+  (?P<user>\S+)      # username
+  (:(?P<pass>\S+))?  # colon followed by the password (optional)
+ )?
+ (?P<cparam>(;[^;]+)*)?  # connection parameters block (optional)
+ @
+ (?P<host>\S+?)          # non-greedy match of the host
+ (:(?P<port>[0-9]+))?    # colon followed by the port (optional)
+ /
+ (?P<path>[^;]+)         # path on the remote system, may be absolute or relative,
+                         # and may include the use of '~' to reference the remote home
+                         # directory
+ (?P<sparam>(;[^;]+)*)?  # parameters block (optional)
+ $
+''', re.VERBOSE)
+
+class SSH(Fetch):
+    '''Class to fetch a module or modules via Secure Shell'''
+
+    def supports(self, url, urldata, d):
+        return __pattern__.match(url) != None
+
+    def localpath(self, url, urldata, d):
+        m = __pattern__.match(url)
+        path = m.group('path')
+        host = m.group('host')
+        lpath = os.path.join(data.getVar('DL_DIR', d, True), host, os.path.basename(path))
+        return lpath
+
+    def go(self, url, urldata, d):
+        dldir = data.getVar('DL_DIR', d, 1)
+
+        m = __pattern__.match(url)
+        path = m.group('path')
+        host = m.group('host')
+        port = m.group('port')
+        user = m.group('user')
+        password = m.group('pass')
+
+        ldir = os.path.join(dldir, host)
+        lpath = os.path.join(ldir, os.path.basename(path))
+
+        if not os.path.exists(ldir):
+            os.makedirs(ldir)
+
+        if port:
+            port = '-P %s' % port
+        else:
+            port = ''
+
+        if user:
+            fr = user
+            if password:
+                fr += ':%s' % password
+            fr += '@%s' % host
+        else:
+            fr = host
+        fr += ':%s' % path
+
+
+        import commands
+        cmd = 'scp -B -r %s %s %s/' % (
+            port,
+            commands.mkarg(fr),
+            commands.mkarg(ldir)
+        )
+
+        (exitstatus, output) = commands.getstatusoutput(cmd)
+        if exitstatus != 0:
+            print(output)
+            raise FetchError('Unable to fetch %s' % url)

bitbake/lib/bb/fetch/svk.py

@@ -0,0 +1,104 @@
+# ex:ts=4:sw=4:sts=4:et
+# -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*-
+"""
+BitBake 'Fetch' implementations
+
+This implementation is for svk. It is based on the svn implementation
+
+"""
+
+# Copyright (C) 2006 Holger Hans Peter Freyther
+# Copyright (C) 2003, 2004  Chris Larson
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Based on functions from the base bb module, Copyright 2003 Holger Schurig
+
+import os
+import logging
+import bb
+from   bb import data
+from   bb.fetch import Fetch
+from   bb.fetch import FetchError
+from   bb.fetch import MissingParameterError
+from   bb.fetch import logger
+
+class Svk(Fetch):
+    """Class to fetch a module or modules from svk repositories"""
+    def supports(self, url, ud, d):
+        """
+        Check to see if a given url can be fetched with svk.
+        """
+        return ud.type in ['svk']
+
+    def localpath(self, url, ud, d):
+        if not "module" in ud.parm:
+            raise MissingParameterError("svk method needs a 'module' parameter")
+        else:
+            ud.module = ud.parm["module"]
+
+        ud.revision = ud.parm.get('rev', "")
+
+        ud.localfile = data.expand('%s_%s_%s_%s_%s.tar.gz' % (ud.module.replace('/', '.'), ud.host, ud.path.replace('/', '.'), ud.revision, ud.date), d)
+
+        return os.path.join(data.getVar("DL_DIR", d, True), ud.localfile)
+
+    def forcefetch(self, url, ud, d):
+        return ud.date == "now"
+
+    def go(self, loc, ud, d):
+        """Fetch urls"""
+
+        svkroot = ud.host + ud.path
+
+        svkcmd = "svk co -r {%s} %s/%s" % (ud.date, svkroot, ud.module)
+
+        if ud.revision:
+            svkcmd = "svk co -r %s %s/%s" % (ud.revision, svkroot, ud.module)
+
+        # create temp directory
+        localdata = data.createCopy(d)
+        data.update_data(localdata)
+        logger.debug(2, "Fetch: creating temporary directory")
+        bb.utils.mkdirhier(data.expand('${WORKDIR}', localdata))
+        data.setVar('TMPBASE', data.expand('${WORKDIR}/oesvk.XXXXXX', localdata), localdata)
+        tmppipe = os.popen(data.getVar('MKTEMPDIRCMD', localdata, 1) or "false")
+        tmpfile = tmppipe.readline().strip()
+        if not tmpfile:
+            logger.error("Fetch: unable to create temporary directory.. make sure 'mktemp' is in the PATH.")
+            raise FetchError(ud.module)
+
+        # check out sources there
+        os.chdir(tmpfile)
+        logger.info("Fetch " + loc)
+        logger.debug(1, "Running %s", svkcmd)
+        myret = os.system(svkcmd)
+        if myret != 0:
+            try:
+                os.rmdir(tmpfile)
+            except OSError:
+                pass
+            raise FetchError(ud.module)
+
+        os.chdir(os.path.join(tmpfile, os.path.dirname(ud.module)))
+        # tar them up to a defined filename
+        myret = os.system("tar -czf %s %s" % (ud.localpath, os.path.basename(ud.module)))
+        if myret != 0:
+            try:
+                os.unlink(ud.localpath)
+            except OSError:
+                pass
+            raise FetchError(ud.module)
+        # cleanup
+        bb.utils.prunedir(tmpfile)

bitbake/lib/bb/fetch/svn.py

@@ -0,0 +1,204 @@
+# ex:ts=4:sw=4:sts=4:et
+# -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*-
+"""
+BitBake 'Fetch' implementation for svn.
+
+"""
+
+# Copyright (C) 2003, 2004  Chris Larson
+# Copyright (C) 2004        Marcin Juszkiewicz
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Based on functions from the base bb module, Copyright 2003 Holger Schurig
+
+import os
+import sys
+import logging
+import bb
+from   bb import data
+from   bb.fetch import Fetch
+from   bb.fetch import FetchError
+from   bb.fetch import MissingParameterError
+from   bb.fetch import runfetchcmd
+from   bb.fetch import logger
+
+class Svn(Fetch):
+    """Class to fetch a module or modules from svn repositories"""
+    def supports(self, url, ud, d):
+        """
+        Check to see if a given url can be fetched with svn.
+        """
+        return ud.type in ['svn']
+
+    def localpath(self, url, ud, d):
+        if not "module" in ud.parm:
+            raise MissingParameterError("svn method needs a 'module' parameter")
+
+        ud.module = ud.parm["module"]
+
+        # Create paths to svn checkouts
+        relpath = self._strip_leading_slashes(ud.path)
+        ud.pkgdir = os.path.join(data.expand('${SVNDIR}', d), ud.host, relpath)
+        ud.moddir = os.path.join(ud.pkgdir, ud.module)
+
+        if 'rev' in ud.parm:
+            ud.date = ""
+            ud.revision = ud.parm['rev']
+        elif 'date' in ud.date:
+            ud.date = ud.parm['date']
+            ud.revision = ""
+        else:
+            #
+            # ***Nasty hack***
+            # If DATE in unexpanded PV, use ud.date (which is set from SRCDATE)
+            # Should warn people to switch to SRCREV here
+            #
+            pv = data.getVar("PV", d, 0)
+            if "DATE" in pv:
+                ud.revision = ""
+            else:
+                rev = Fetch.srcrev_internal_helper(ud, d)
+                if rev is True:
+                    ud.revision = self.latest_revision(url, ud, d)
+                    ud.date = ""
+                elif rev:
+                    ud.revision = rev
+                    ud.date = ""
+                else:
+                    ud.revision = ""
+
+        ud.localfile = data.expand('%s_%s_%s_%s_%s.tar.gz' % (ud.module.replace('/', '.'), ud.host, ud.path.replace('/', '.'), ud.revision, ud.date), d)
+
+        return os.path.join(data.getVar("DL_DIR", d, True), ud.localfile)
+
+    def _buildsvncommand(self, ud, d, command):
+        """
+        Build up an svn commandline based on ud
+        command is "fetch", "update", "info"
+        """
+
+        basecmd = data.expand('${FETCHCMD_svn}', d)
+
+        proto = ud.parm.get('proto', 'svn')
+
+        svn_rsh = None
+        if proto == "svn+ssh" and "rsh" in ud.parm:
+            svn_rsh = ud.parm["rsh"]
+
+        svnroot = ud.host + ud.path
+
+        # either use the revision, or SRCDATE in braces,
+        options = []
+
+        if ud.user:
+            options.append("--username %s" % ud.user)
+
+        if ud.pswd:
+            options.append("--password %s" % ud.pswd)
+
+        if command is "info":
+            svncmd = "%s info %s %s://%s/%s/" % (basecmd, " ".join(options), proto, svnroot, ud.module)
+        else:
+            suffix = ""
+            if ud.revision:
+                options.append("-r %s" % ud.revision)
+                suffix = "@%s" % (ud.revision)
+            elif ud.date:
+                options.append("-r {%s}" % ud.date)
+
+            if command is "fetch":
+                svncmd = "%s co %s %s://%s/%s%s %s" % (basecmd, " ".join(options), proto, svnroot, ud.module, suffix, ud.module)
+            elif command is "update":
+                svncmd = "%s update %s" % (basecmd, " ".join(options))
+            else:
+                raise FetchError("Invalid svn command %s" % command)
+
+        if svn_rsh:
+            svncmd = "svn_RSH=\"%s\" %s" % (svn_rsh, svncmd)
+
+        return svncmd
+
+    def go(self, loc, ud, d):
+        """Fetch url"""
+
+        logger.debug(2, "Fetch: checking for module directory '" + ud.moddir + "'")
+
+        if os.access(os.path.join(ud.moddir, '.svn'), os.R_OK):
+            svnupdatecmd = self._buildsvncommand(ud, d, "update")
+            logger.info("Update " + loc)
+            # update sources there
+            os.chdir(ud.moddir)
+            logger.debug(1, "Running %s", svnupdatecmd)
+            runfetchcmd(svnupdatecmd, d)
+        else:
+            svnfetchcmd = self._buildsvncommand(ud, d, "fetch")
+            logger.info("Fetch " + loc)
+            # check out sources there
+            bb.utils.mkdirhier(ud.pkgdir)
+            os.chdir(ud.pkgdir)
+            logger.debug(1, "Running %s", svnfetchcmd)
+            runfetchcmd(svnfetchcmd, d)
+
+        scmdata = ud.parm.get("scmdata", "")
+        if scmdata == "keep":
+            tar_flags = ""
+        else:
+            tar_flags = "--exclude '.svn'"
+
+        os.chdir(ud.pkgdir)
+        # tar them up to a defined filename
+        try:
+            runfetchcmd("tar %s -czf %s %s" % (tar_flags, ud.localpath, ud.module), d)
+        except:
+            t, v, tb = sys.exc_info()
+            try:
+                os.unlink(ud.localpath)
+            except OSError:
+                pass
+            raise t, v, tb
+
+    def supports_srcrev(self):
+        return True
+
+    def _revision_key(self, url, ud, d):
+        """
+        Return a unique key for the url
+        """
+        return "svn:" + ud.moddir
+
+    def _latest_revision(self, url, ud, d):
+        """
+        Return the latest upstream revision number
+        """
+        logger.debug(2, "SVN fetcher hitting network for %s", url)
+
+        output = runfetchcmd("LANG=C LC_ALL=C " + self._buildsvncommand(ud, d, "info"), d, True)
+
+        revision = None
+        for line in output.splitlines():
+            if "Last Changed Rev" in line:
+                revision = line.split(":")[1].strip()
+
+        return revision
+
+    def _sortable_revision(self, url, ud, d):
+        """
+        Return a sortable revision number which in our case is the revision number
+        """
+
+        return self._build_revision(url, ud, d)
+
+    def _build_revision(self, url, ud, d):
+        return ud.revision

bitbake/lib/bb/fetch/wget.py

@@ -0,0 +1,93 @@
+# ex:ts=4:sw=4:sts=4:et
+# -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*-
+"""
+BitBake 'Fetch' implementations
+
+Classes for obtaining upstream sources for the
+BitBake build tools.
+
+"""
+
+# Copyright (C) 2003, 2004  Chris Larson
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Based on functions from the base bb module, Copyright 2003 Holger Schurig
+
+import os
+import logging
+import bb
+import urllib
+from   bb import data
+from   bb.fetch import Fetch, FetchError, encodeurl, decodeurl, logger, runfetchcmd
+
+class Wget(Fetch):
+    """Class to fetch urls via 'wget'"""
+    def supports(self, url, ud, d):
+        """
+        Check to see if a given url can be fetched with wget.
+        """
+        return ud.type in ['http', 'https', 'ftp']
+
+    def localpath(self, url, ud, d):
+
+        url = encodeurl([ud.type, ud.host, ud.path, ud.user, ud.pswd, {}])
+        ud.basename = os.path.basename(ud.path)
+        ud.localfile = data.expand(urllib.unquote(ud.basename), d)
+
+        return os.path.join(data.getVar("DL_DIR", d, True), ud.localfile)
+
+    def go(self, uri, ud, d, checkonly = False):
+        """Fetch urls"""
+
+        def fetch_uri(uri, ud, d):
+            if checkonly:
+                fetchcmd = data.getVar("CHECKCOMMAND", d, 1)
+            elif os.path.exists(ud.localpath):
+                # file exists, but we didnt complete it.. trying again..
+                fetchcmd = data.getVar("RESUMECOMMAND", d, 1)
+            else:
+                fetchcmd = data.getVar("FETCHCOMMAND", d, 1)
+
+            uri = uri.split(";")[0]
+            uri_decoded = list(decodeurl(uri))
+            uri_type = uri_decoded[0]
+            uri_host = uri_decoded[1]
+
+            fetchcmd = fetchcmd.replace("${URI}", uri.split(";")[0])
+            fetchcmd = fetchcmd.replace("${FILE}", ud.basename)
+            logger.info("fetch " + uri)
+            logger.debug(2, "executing " + fetchcmd)
+            runfetchcmd(fetchcmd, d)
+
+            # Sanity check since wget can pretend it succeed when it didn't
+            # Also, this used to happen if sourceforge sent us to the mirror page
+            if not os.path.exists(ud.localpath) and not checkonly:
+                logger.debug(2, "The fetch command for %s returned success but %s doesn't exist?...", uri, ud.localpath)
+                return False
+
+            return True
+
+        localdata = data.createCopy(d)
+        data.setVar('OVERRIDES', "wget:" + data.getVar('OVERRIDES', localdata), localdata)
+        data.update_data(localdata)
+
+        if fetch_uri(uri, ud, localdata):
+            return True
+
+        raise FetchError(uri)
+
+
+    def checkstatus(self, uri, ud, d):
+        return self.go(uri, ud, d, True)

bitbake/lib/bb/fetch2/bzr.py

@@ -60,7 +60,7 @@ class Bzr(FetchMethod):
 
         basecmd = data.expand('${FETCHCMD_bzr}', d)
 
-        proto =  ud.parm.get('protocol', 'http')
+        proto =  ud.parm.get('proto', 'http')
 
         bzrroot = ud.host + ud.path
 
@@ -73,7 +73,7 @@ class Bzr(FetchMethod):
                 options.append("-r %s" % ud.revision)
 
             if command == "fetch":
-                bzrcmd = "%s branch %s %s://%s" % (basecmd, " ".join(options), proto, bzrroot)
+                bzrcmd = "%s co %s %s://%s" % (basecmd, " ".join(options), proto, bzrroot)
             elif command == "update":
                 bzrcmd = "%s pull %s --overwrite" % (basecmd, " ".join(options))
             else:

bitbake/lib/bb/fetch2/cvs.py

@@ -29,6 +29,7 @@ BitBake build tools.
 import os
 import logging
 import bb
+from   bb import data
 from bb.fetch2 import FetchMethod, FetchError, MissingParameterError, logger
 from bb.fetch2 import runfetchcmd
 
@@ -63,7 +64,7 @@ class Cvs(FetchMethod):
         if 'fullpath' in ud.parm:
             fullpath = '_fullpath'
 
-        ud.localfile = bb.data.expand('%s_%s_%s_%s%s%s.tar.gz' % (ud.module.replace('/', '.'), ud.host, ud.tag, ud.date, norecurse, fullpath), d)
+        ud.localfile = data.expand('%s_%s_%s_%s%s%s.tar.gz' % (ud.module.replace('/', '.'), ud.host, ud.tag, ud.date, norecurse, fullpath), d)
 
     def need_update(self, url, ud, d):
         if (ud.date == "now"):
@@ -87,10 +88,10 @@ class Cvs(FetchMethod):
             cvsroot = ud.path
         else:
             cvsroot = ":" + method
-            cvsproxyhost = d.getVar('CVS_PROXY_HOST', True)
+            cvsproxyhost = data.getVar('CVS_PROXY_HOST', d, True)
             if cvsproxyhost:
                 cvsroot += ";proxy=" + cvsproxyhost
-            cvsproxyport = d.getVar('CVS_PROXY_PORT', True)
+            cvsproxyport = data.getVar('CVS_PROXY_PORT', d, True)
             if cvsproxyport:
                 cvsroot += ";proxyport=" + cvsproxyport
             cvsroot += ":" + ud.user
@@ -110,9 +111,15 @@ class Cvs(FetchMethod):
         if ud.tag:
             options.append("-r %s" % ud.tag)
 
-        cvsbasecmd = d.getVar("FETCHCMD_cvs", True)
-        cvscmd = cvsbasecmd + " '-d" + cvsroot + "' co " + " ".join(options) + " " + ud.module
-        cvsupdatecmd = cvsbasecmd + " '-d" + cvsroot + "' update -d -P " + " ".join(options)
+        localdata = data.createCopy(d)
+        data.setVar('OVERRIDES', "cvs:%s" % data.getVar('OVERRIDES', localdata), localdata)
+        data.update_data(localdata)
+
+        data.setVar('CVSROOT', cvsroot, localdata)
+        data.setVar('CVSCOOPTS', " ".join(options), localdata)
+        data.setVar('CVSMODULE', ud.module, localdata)
+        cvscmd = data.getVar('FETCHCOMMAND', localdata, True)
+        cvsupdatecmd = data.getVar('UPDATECOMMAND', localdata, True)
 
         if cvs_rsh:
             cvscmd = "CVS_RSH=\"%s\" %s" % (cvs_rsh, cvscmd)
@@ -120,8 +127,8 @@ class Cvs(FetchMethod):
 
         # create module directory
         logger.debug(2, "Fetch: checking for module directory")
-        pkg = d.getVar('PN', True)
-        pkgdir = os.path.join(d.getVar('CVSDIR', True), pkg)
+        pkg = data.expand('${PN}', d)
+        pkgdir = os.path.join(data.expand('${CVSDIR}', localdata), pkg)
         moddir = os.path.join(pkgdir, localdir)
         if os.access(os.path.join(moddir, 'CVS'), os.R_OK):
             logger.info("Update " + loc)
@@ -162,9 +169,12 @@ class Cvs(FetchMethod):
 
     def clean(self, ud, d):
         """ Clean CVS Files and tarballs """
-
-        pkg = d.getVar('PN', True)
-        pkgdir = os.path.join(d.getVar("CVSDIR", True), pkg)
+        
+        pkg = data.expand('${PN}', d)
+        localdata = data.createCopy(d)
+        data.setVar('OVERRIDES', "cvs:%s" % data.getVar('OVERRIDES', localdata), localdata)
+        data.update_data(localdata)
+        pkgdir = os.path.join(data.expand('${CVSDIR}', localdata), pkg)
 
         bb.utils.remove(pkgdir, True)
         bb.utils.remove(ud.localpath)

bitbake/lib/bb/fetch2/git.py

@@ -11,8 +11,8 @@ Supported SRC_URI options are:
 - branch
    The git branch to retrieve from. The default is "master"
 
-   This option also supports multiple branch fetching, with branches
-   separated by commas.  In multiple branches case, the name option
+   this option also support multiple branches fetching, branches
+   are seperated by comma. in multiple branches case, the name option
    must have the same number of names to match the branches, which is
    used to specify the SRC_REV for the branch
    e.g:
@@ -25,25 +25,19 @@ Supported SRC_URI options are:
 
 - protocol
    The method to use to access the repository. Common options are "git",
-   "http", "https", "file", "ssh" and "rsync". The default is "git".
+   "http", "file" and "rsync". The default is "git"
 
 - rebaseable
    rebaseable indicates that the upstream git repo may rebase in the future,
    and current revision may disappear from upstream repo. This option will
-   remind fetcher to preserve local cache carefully for future use.
-   The default value is "0", set rebaseable=1 for rebaseable git repo.
+   reminder fetcher to preserve local cache carefully for future use.
+   The default value is "0", set rebaseable=1 for rebaseable git repo
 
 - nocheckout
    Don't checkout source code when unpacking. set this option for the recipe
    who has its own routine to checkout code.
    The default is "0", set nocheckout=1 if needed.
 
-- bareclone
-   Create a bare clone of the source code and don't checkout the source code
-   when unpacking. Set this option for the recipe who has its own routine to
-   checkout code and tracking branch requirements.
-   The default is "0", set bareclone=1 if needed.
-
 """
 
 #Copyright (C) 2005 Richard Purdie
@@ -71,17 +65,17 @@ from   bb.fetch2 import logger
 class Git(FetchMethod):
     """Class to fetch a module or modules from git repositories"""
     def init(self, d):
-        pass
-
+        #
+        # Only enable _sortable revision if the key is set
+        #
+        if bb.data.getVar("BB_GIT_CLONE_FOR_SRCREV", d, True):
+            self._sortable_buildindex = self._sortable_buildindex_disabled
     def supports(self, url, ud, d):
         """
         Check to see if a given url can be fetched with git.
         """
         return ud.type in ['git']
 
-    def supports_checksum(self, urldata):
-        return False
-
     def urldata_init(self, ud, d):
         """
         init git specific variable within url data
@@ -94,18 +88,13 @@ class Git(FetchMethod):
         else:
             ud.proto = "git"
 
-        if not ud.proto in ('git', 'file', 'ssh', 'http', 'https', 'rsync'):
+        if not ud.proto in ('git', 'file', 'ssh', 'http', 'https'):
             raise bb.fetch2.ParameterError("Invalid protocol type", ud.url)
 
         ud.nocheckout = ud.parm.get("nocheckout","0") == "1"
 
         ud.rebaseable = ud.parm.get("rebaseable","0") == "1"
 
-        # bareclone implies nocheckout
-        ud.bareclone = ud.parm.get("bareclone","0") == "1"
-        if ud.bareclone:
-            ud.nocheckout = 1
-  
         branches = ud.parm.get("branch", "master").split(',')
         if len(branches) != len(ud.names):
             raise bb.fetch2.ParameterError("The number of name and branch parameters is not balanced", ud.url)
@@ -123,11 +112,10 @@ class Git(FetchMethod):
         for name in ud.names:
             # Ensure anything that doesn't look like a sha256 checksum/revision is translated into one
             if not ud.revisions[name] or len(ud.revisions[name]) != 40  or (False in [c in "abcdef0123456789" for c in ud.revisions[name]]):
-                if ud.revisions[name]:
-                    ud.branches[name] = ud.revisions[name]
+                ud.branches[name] = ud.revisions[name]
                 ud.revisions[name] = self.latest_revision(ud.url, ud, d, name)
 
-        gitsrcname = '%s%s' % (ud.host.replace(':','.'), ud.path.replace('/', '.').replace('*', '.'))
+        gitsrcname = '%s%s' % (ud.host, ud.path.replace('/', '.'))
         # for rebaseable git repo, it is necessary to keep mirror tar ball
         # per revision, so that even the revision disappears from the
         # upstream repo in the future, the mirror will remain intact and still
@@ -136,9 +124,8 @@ class Git(FetchMethod):
             for name in ud.names:
                 gitsrcname = gitsrcname + '_' + ud.revisions[name]
         ud.mirrortarball = 'git2_%s.tar.gz' % (gitsrcname)
-        ud.fullmirror = os.path.join(d.getVar("DL_DIR", True), ud.mirrortarball)
-        gitdir = d.getVar("GITDIR", True) or (d.getVar("DL_DIR", True) + "/git2/")
-        ud.clonedir = os.path.join(gitdir, gitsrcname)
+        ud.fullmirror = os.path.join(data.getVar("DL_DIR", d, True), ud.mirrortarball)
+        ud.clonedir = os.path.join(data.expand('${GITDIR}', d), gitsrcname)
 
         ud.localfile = ud.clonedir
 
@@ -159,7 +146,7 @@ class Git(FetchMethod):
     def try_premirror(self, u, ud, d):
         # If we don't do this, updating an existing checkout with only premirrors
         # is not possible
-        if d.getVar("BB_FETCH_PREMIRRORONLY", True) is not None:
+        if bb.data.getVar("BB_FETCH_PREMIRRORONLY", d, True) is not None:
             return True
         if os.path.exists(ud.clonedir):
             return False
@@ -181,16 +168,11 @@ class Git(FetchMethod):
             os.chdir(ud.clonedir)
             runfetchcmd("tar -xzf %s" % (ud.fullmirror), d)
 
-        repourl = "%s://%s%s%s" % (ud.proto, username, ud.host, ud.path)
-
         # If the repo still doesn't exist, fallback to cloning it
         if not os.path.exists(ud.clonedir):
-            # We do this since git will use a "-l" option automatically for local urls where possible
-            if repourl.startswith("file://"):
-                repourl = repourl[7:]
-            clone_cmd = "%s clone --bare --mirror %s %s" % (ud.basecmd, repourl, ud.clonedir)
-            if ud.proto.lower() != 'file':
-                bb.fetch2.check_network_access(d, clone_cmd)
+            clone_cmd = "%s clone --bare --mirror %s://%s%s%s %s" % \
+                  (ud.basecmd, ud.proto, username, ud.host, ud.path, ud.clonedir)
+            bb.fetch2.check_network_access(d, clone_cmd)
             runfetchcmd(clone_cmd, d)
 
         os.chdir(ud.clonedir)
@@ -201,14 +183,14 @@ class Git(FetchMethod):
                 needupdate = True
         if needupdate:
             try: 
+                runfetchcmd("%s remote prune origin" % ud.basecmd, d) 
                 runfetchcmd("%s remote rm origin" % ud.basecmd, d) 
             except bb.fetch2.FetchError:
                 logger.debug(1, "No Origin")
-
-            runfetchcmd("%s remote add --mirror=fetch origin %s" % (ud.basecmd, repourl), d)
-            fetch_cmd = "%s fetch -f --prune %s refs/*:refs/*" % (ud.basecmd, repourl)
-            if ud.proto.lower() != 'file':
-                bb.fetch2.check_network_access(d, fetch_cmd, ud.url)
+            
+            runfetchcmd("%s remote add --mirror origin %s://%s%s%s" % (ud.basecmd, ud.proto, username, ud.host, ud.path), d)
+            fetch_cmd = "%s fetch --all -t" % ud.basecmd
+            bb.fetch2.check_network_access(d, fetch_cmd, ud.url)
             runfetchcmd(fetch_cmd, d)
             runfetchcmd("%s prune-packed" % ud.basecmd, d)
             runfetchcmd("%s pack-redundant --all | xargs -r rm" % ud.basecmd, d)
@@ -217,14 +199,9 @@ class Git(FetchMethod):
     def build_mirror_data(self, url, ud, d):
         # Generate a mirror tarball if needed
         if ud.write_tarballs and (ud.repochanged or not os.path.exists(ud.fullmirror)):
-            # it's possible that this symlink points to read-only filesystem with PREMIRROR
-            if os.path.islink(ud.fullmirror):
-                os.unlink(ud.fullmirror)
-
             os.chdir(ud.clonedir)
             logger.info("Creating tarball of git repository")
             runfetchcmd("tar -czf %s %s" % (ud.fullmirror, os.path.join(".") ), d)
-            runfetchcmd("touch %s.done" % (ud.fullmirror), d)
 
     def unpack(self, ud, destdir, d):
         """ unpack the downloaded src to destdir"""
@@ -232,37 +209,14 @@ class Git(FetchMethod):
         subdir = ud.parm.get("subpath", "")
         if subdir != "":
             readpathspec = ":%s" % (subdir)
-            def_destsuffix = "%s/" % os.path.basename(subdir)
         else:
             readpathspec = ""
-            def_destsuffix = "git/"
 
-        destsuffix = ud.parm.get("destsuffix", def_destsuffix)
-        destdir = ud.destdir = os.path.join(destdir, destsuffix)
+        destdir = os.path.join(destdir, "git/")
         if os.path.exists(destdir):
             bb.utils.prunedir(destdir)
 
-        cloneflags = "-s -n"
-        if ud.bareclone:
-            cloneflags += " --mirror"
-
-        # Versions of git prior to 1.7.9.2 have issues where foo.git and foo get confused
-        # and you end up with some horrible union of the two when you attempt to clone it
-        # The least invasive workaround seems to be a symlink to the real directory to
-        # fool git into ignoring any .git version that may also be present.
-        #
-        # The issue is fixed in more recent versions of git so we can drop this hack in future
-        # when that version becomes common enough.
-        clonedir = ud.clonedir
-        if not ud.path.endswith(".git"):
-            indirectiondir = destdir[:-1] + ".indirectionsymlink"
-            if os.path.exists(indirectiondir):
-                os.remove(indirectiondir)
-            bb.utils.mkdirhier(os.path.dirname(indirectiondir))
-            os.symlink(ud.clonedir, indirectiondir)
-            clonedir = indirectiondir
-
-        runfetchcmd("git clone %s %s/ %s" % (cloneflags, clonedir, destdir), d)
+        runfetchcmd("git clone -s -n %s %s" % (ud.clonedir, destdir), d)
         if not ud.nocheckout:
             os.chdir(destdir)
             if subdir != "":
@@ -283,10 +237,7 @@ class Git(FetchMethod):
 
     def _contains_ref(self, tag, d):
         basecmd = data.getVar("FETCHCMD_git", d, True) or "git"
-        cmd = "%s log --pretty=oneline -n 1 %s -- 2> /dev/null | wc -l" % (basecmd, tag)
-        output = runfetchcmd(cmd, d, quiet=True)
-        if len(output.split()) > 1:
-            raise bb.fetch2.FetchError("The command '%s' gave output with more then 1 line unexpectedly, output: '%s'" % (cmd, output))
+        output = runfetchcmd("%s log --pretty=oneline -n 1 %s -- 2> /dev/null | wc -l" % (basecmd, tag), d, quiet=True)
         return output.split()[0] != "0"
 
     def _revision_key(self, url, ud, d, name):
@@ -307,8 +258,7 @@ class Git(FetchMethod):
         basecmd = data.getVar("FETCHCMD_git", d, True) or "git"
         cmd = "%s ls-remote %s://%s%s%s %s" % \
               (basecmd, ud.proto, username, ud.host, ud.path, ud.branches[name])
-        if ud.proto.lower() != 'file':
-            bb.fetch2.check_network_access(d, cmd)
+        bb.fetch2.check_network_access(d, cmd)
         output = runfetchcmd(cmd, d, True)
         if not output:
             raise bb.fetch2.FetchError("The command %s gave empty output unexpectedly" % cmd, url)
@@ -317,10 +267,34 @@ class Git(FetchMethod):
     def _build_revision(self, url, ud, d, name):
         return ud.revisions[name]
 
-    def checkstatus(self, uri, ud, d):
-        fetchcmd = "%s ls-remote %s" % (ud.basecmd, uri)
-        try:
-            runfetchcmd(fetchcmd, d, quiet=True)
-            return True
-        except FetchError:
-            return False
+    def _sortable_buildindex_disabled(self, url, ud, d, rev):
+        """
+        Return a suitable buildindex for the revision specified. This is done by counting revisions
+        using "git rev-list" which may or may not work in different circumstances.
+        """
+
+        cwd = os.getcwd()
+
+        # Check if we have the rev already
+
+        if not os.path.exists(ud.clonedir):
+            logging.debug("GIT repository for %s does not exist in %s.  \
+                          Downloading.", url, ud.clonedir)
+            self.download(None, ud, d)
+            if not os.path.exists(ud.clonedir):
+                logger.error("GIT repository for %s does not exist in %s after \
+                             download. Cannot get sortable buildnumber, using \
+                             old value", url, ud.clonedir)
+                return None
+
+
+        os.chdir(ud.clonedir)
+        if not self._contains_ref(rev, d):
+            self.download(None, ud, d)
+
+        output = runfetchcmd("%s rev-list %s -- 2> /dev/null | wc -l" % (ud.basecmd, rev), d, quiet=True)
+        os.chdir(cwd)
+
+        buildindex = "%s" % output.split()[0]
+        logger.debug(1, "GIT repository for %s in %s is returning %s revisions in rev-list before %s", url, ud.clonedir, buildindex, rev)
+        return buildindex

bitbake/lib/bb/fetch2/gitsm.py

@@ -1,78 +0,0 @@
-# ex:ts=4:sw=4:sts=4:et
-# -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*-
-"""
-BitBake 'Fetch' git submodules implementation
-"""
-
-# Copyright (C) 2013 Richard Purdie
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-import os
-import bb
-from   bb    import data
-from   bb.fetch2.git import Git
-from   bb.fetch2 import runfetchcmd
-from   bb.fetch2 import logger
-
-class GitSM(Git):
-    def supports(self, url, ud, d):
-        """
-        Check to see if a given url can be fetched with git.
-        """
-        return ud.type in ['gitsm']
-
-    def uses_submodules(self, ud, d):
-        for name in ud.names:
-            try:
-                runfetchcmd("%s show %s:.gitmodules" % (ud.basecmd, ud.revisions[name]), d, quiet=True)
-                return True
-            except bb.fetch.FetchError:
-                pass
-        return False
-
-    def update_submodules(self, u, ud, d):
-        # We have to convert bare -> full repo, do the submodule bit, then convert back
-        tmpclonedir = ud.clonedir + ".tmp"
-        gitdir = tmpclonedir + os.sep + ".git"
-        bb.utils.remove(tmpclonedir, True)
-        os.mkdir(tmpclonedir)
-        os.rename(ud.clonedir, gitdir)
-        runfetchcmd("sed " + gitdir + "/config -i -e 's/bare.*=.*true/bare = false/'", d)
-        os.chdir(tmpclonedir)
-        runfetchcmd("git reset --hard", d)
-        runfetchcmd("git submodule init", d)
-        runfetchcmd("git submodule update", d)
-        runfetchcmd("sed " + gitdir + "/config -i -e 's/bare.*=.*false/bare = true/'", d)
-        os.rename(gitdir, ud.clonedir,)
-        bb.utils.remove(tmpclonedir, True)
-
-    def download(self, loc, ud, d):
-        Git.download(self, loc, ud, d)
-
-        os.chdir(ud.clonedir)
-        submodules = self.uses_submodules(ud, d)
-        if submodules:
-            self.update_submodules(loc, ud, d)
-
-    def unpack(self, ud, destdir, d):
-        Git.unpack(self, ud, destdir, d)
-        
-        os.chdir(ud.destdir)
-        submodules = self.uses_submodules(ud, d)
-        if submodules:
-            runfetchcmd("cp -r " + ud.clonedir + "/modules " + ud.destdir + "/.git/", d)
-            runfetchcmd("git submodule init", d)
-            runfetchcmd("git submodule update", d)
-

bitbake/lib/bb/fetch2/hg.py

@@ -82,7 +82,7 @@ class Hg(FetchMethod):
 
         basecmd = data.expand('${FETCHCMD_hg}', d)
 
-        proto = ud.parm.get('protocol', 'http')
+        proto = ud.parm.get('proto', 'http')
 
         host = ud.host
         if proto == "file":
@@ -92,21 +92,13 @@ class Hg(FetchMethod):
         if not ud.user:
             hgroot = host + ud.path
         else:
-            if ud.pswd:
-                hgroot = ud.user + ":" + ud.pswd + "@" + host + ud.path
-            else:
-                hgroot = ud.user + "@" + host + ud.path
+            hgroot = ud.user + "@" + host + ud.path
 
         if command == "info":
             return "%s identify -i %s://%s/%s" % (basecmd, proto, hgroot, ud.module)
 
         options = [];
-
-        # Don't specify revision for the fetch; clone the entire repo.
-        # This avoids an issue if the specified revision is a tag, because
-        # the tag actually exists in the specified revision + 1, so it won't
-        # be available when used in any successive commands.
-        if ud.revision and command != "fetch":
+        if ud.revision:
             options.append("-r %s" % ud.revision)
 
         if command == "fetch":
@@ -115,10 +107,7 @@ class Hg(FetchMethod):
             # do not pass options list; limiting pull to rev causes the local
             # repo not to contain it and immediately following "update" command
             # will crash
-            if ud.user and ud.pswd:
-                cmd = "%s --config auth.default.prefix=* --config auth.default.username=%s --config auth.default.password=%s --config \"auth.default.schemes=%s\" pull" % (basecmd, ud.user, ud.pswd, proto)
-            else:
-                cmd = "%s pull" % (basecmd)
+            cmd = "%s pull" % (basecmd)
         elif command == "update":
             cmd = "%s update -C %s" % (basecmd, " ".join(options))
         else:
@@ -177,7 +166,7 @@ class Hg(FetchMethod):
         output = runfetchcmd(self._buildhgcommand(ud, d, "info"), d)
         return output.strip()
 
-    def _build_revision(self, url, ud, d, name):
+    def _build_revision(self, url, ud, d):
         return ud.revision
 
     def _revision_key(self, url, ud, d, name):

bitbake/lib/bb/fetch2/local.py

@@ -26,12 +26,10 @@ BitBake build tools.
 # Based on functions from the base bb module, Copyright 2003 Holger Schurig
 
 import os
-import urllib
 import bb
 import bb.utils
 from   bb import data
-from   bb.fetch2 import FetchMethod, FetchError
-from   bb.fetch2 import logger
+from   bb.fetch2 import FetchMethod
 
 class Local(FetchMethod):
     def supports(self, url, urldata, d):
@@ -42,37 +40,29 @@ class Local(FetchMethod):
 
     def urldata_init(self, ud, d):
         # We don't set localfile as for this fetcher the file is already local!
-        ud.decodedurl = urllib.unquote(ud.url.split("://")[1].split(";")[0])
-        ud.basename = os.path.basename(ud.decodedurl)
-        ud.basepath = ud.decodedurl
+        ud.basename = os.path.basename(ud.url.split("://")[1].split(";")[0])
         return
 
     def localpath(self, url, urldata, d):
         """
         Return the local filename of a given url assuming a successful fetch.
         """
-        path = urldata.decodedurl
+        path = url.split("://")[1]
+        path = path.split(";")[0]
         newpath = path
+        dldirfile = os.path.join(data.getVar("DL_DIR", d, True), os.path.basename(path))
+        if os.path.exists(dldirfile):
+            return dldirfile
         if path[0] != "/":
             filespath = data.getVar('FILESPATH', d, True)
             if filespath:
-                logger.debug(2, "Searching for %s in paths:    \n%s" % (path, "\n    ".join(filespath.split(":"))))
                 newpath = bb.utils.which(filespath, path)
             if not newpath:
                 filesdir = data.getVar('FILESDIR', d, True)
                 if filesdir:
-                    logger.debug(2, "Searching for %s in path: %s" % (path, filesdir))
                     newpath = os.path.join(filesdir, path)
-            if (not newpath or not os.path.exists(newpath)) and path.find("*") != -1:
-                # For expressions using '*', best we can do is take the first directory in FILESPATH that exists
-                newpath = bb.utils.which(filespath, ".")
-                logger.debug(2, "Searching for %s in path: %s" % (path, newpath))
-                return newpath
-            if not os.path.exists(newpath):
-                dldirfile = os.path.join(d.getVar("DL_DIR", True), path)
-                logger.debug(2, "Defaulting to %s for %s" % (dldirfile, path))
-                bb.utils.mkdirhier(os.path.dirname(dldirfile))
-                return dldirfile
+        if not os.path.exists(newpath) and path.find("*") == -1:
+            return dldirfile
         return newpath
 
     def need_update(self, url, ud, d):
@@ -85,20 +75,7 @@ class Local(FetchMethod):
     def download(self, url, urldata, d):
         """Fetch urls (no-op for Local method)"""
         # no need to fetch local files, we'll deal with them in place.
-        if self.supports_checksum(urldata) and not os.path.exists(urldata.localpath):
-            locations = []
-            filespath = data.getVar('FILESPATH', d, True)
-            if filespath:
-                locations = filespath.split(":")
-            filesdir = data.getVar('FILESDIR', d, True)
-            if filesdir:
-                locations.append(filesdir)
-            locations.append(d.getVar("DL_DIR", True))
-
-            msg = "Unable to find file " + url + " anywhere. The paths that were searched were:\n    " + "\n    ".join(locations)
-            raise FetchError(msg)
-
-        return True
+        return 1
 
     def checkstatus(self, url, urldata, d):
         """

bitbake/lib/bb/fetch2/osc.py

@@ -57,7 +57,7 @@ class Osc(FetchMethod):
 
         basecmd = data.expand('${FETCHCMD_osc}', d)
 
-        proto = ud.parm.get('protocol', 'ocs')
+        proto = ud.parm.get('proto', 'ocs')
 
         options = []
 

bitbake/lib/bb/fetch2/perforce.py

@@ -27,7 +27,6 @@ BitBake build tools.
 
 from future_builtins import zip
 import os
-import subprocess
 import logging
 import bb
 from   bb import data
@@ -91,8 +90,8 @@ class Perforce(FetchMethod):
 
         p4cmd = data.getVar('FETCHCOMMAND_p4', d, True)
         logger.debug(1, "Running %s%s changes -m 1 %s", p4cmd, p4opt, depot)
-        p4file, errors = bb.process.run("%s%s changes -m 1 %s" % (p4cmd, p4opt, depot))
-        cset = p4file.strip()
+        p4file = os.popen("%s%s changes -m 1 %s" % (p4cmd, p4opt, depot))
+        cset = p4file.readline().strip()
         logger.debug(1, "READ %s", cset)
         if not cset:
             return -1
@@ -112,7 +111,7 @@ class Perforce(FetchMethod):
         base = path
         which = path.find('/...')
         if which != -1:
-            base = path[:which-1]
+            base = path[:which]
 
         base = self._strip_leading_slashes(base)
 
@@ -155,8 +154,8 @@ class Perforce(FetchMethod):
         logger.debug(2, "Fetch: creating temporary directory")
         bb.utils.mkdirhier(data.expand('${WORKDIR}', localdata))
         data.setVar('TMPBASE', data.expand('${WORKDIR}/oep4.XXXXXX', localdata), localdata)
-        tmpfile, errors = bb.process.run(data.getVar('MKTEMPDIRCMD', localdata, True) or "false")
-        tmpfile = tmpfile.strip()
+        tmppipe = os.popen(data.getVar('MKTEMPDIRCMD', localdata, True) or "false")
+        tmpfile = tmppipe.readline().strip()
         if not tmpfile:
             raise FetchError("Fetch: unable to create temporary directory.. make sure 'mktemp' is in the PATH.", loc)
 
@@ -169,8 +168,7 @@ class Perforce(FetchMethod):
         os.chdir(tmpfile)
         logger.info("Fetch " + loc)
         logger.info("%s%s files %s", p4cmd, p4opt, depot)
-        p4file, errors = bb.process.run("%s%s files %s" % (p4cmd, p4opt, depot))
-        p4file = [f.rstrip() for f in p4file.splitlines()]
+        p4file = os.popen("%s%s files %s" % (p4cmd, p4opt, depot))
 
         if not p4file:
             raise FetchError("Fetch: unable to get the P4 files from %s" % depot, loc)
@@ -186,7 +184,7 @@ class Perforce(FetchMethod):
             dest = list[0][len(path)+1:]
             where = dest.find("#")
 
-            subprocess.call("%s%s print -o %s/%s %s" % (p4cmd, p4opt, module, dest[:where], list[0]), shell=True)
+            os.system("%s%s print -o %s/%s %s" % (p4cmd, p4opt, module, dest[:where], list[0]))
             count = count + 1
 
         if count == 0:

bitbake/lib/bb/fetch2/sftp.py

@@ -1,129 +0,0 @@
-# ex:ts=4:sw=4:sts=4:et
-# -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*-
-"""
-BitBake SFTP Fetch implementation
-
-Class for fetching files via SFTP. It tries to adhere to the (now
-expired) IETF Internet Draft for "Uniform Resource Identifier (URI)
-Scheme for Secure File Transfer Protocol (SFTP) and Secure Shell
-(SSH)" (SECSH URI).
-
-It uses SFTP (as to adhere to the SECSH URI specification). It only
-supports key based authentication, not password. This class, unlike
-the SSH fetcher, does not support fetching a directory tree from the
-remote.
-
-  http://tools.ietf.org/html/draft-ietf-secsh-scp-sftp-ssh-uri-04
-  https://www.iana.org/assignments/uri-schemes/prov/sftp
-  https://tools.ietf.org/html/draft-ietf-secsh-filexfer-13
-
-Please note that '/' is used as host path seperator, and not ":"
-as you may be used to from the scp/sftp commands. You can use a
-~ (tilde) to specify a path relative to your home directory.
-(The /~user/ syntax, for specyfing a path relative to another
-user's home directory is not supported.) Note that the tilde must
-still follow the host path seperator ("/"). See exampels below.
-
-Example SRC_URIs:
-
-SRC_URI = "sftp://host.example.com/dir/path.file.txt"
-
-A path relative to your home directory.
-
-SRC_URI = "sftp://host.example.com/~/dir/path.file.txt"
-
-You can also specify a username (specyfing password in the
-URI is not supported, use SSH keys to authenticate):
-
-SRC_URI = "sftp://user@host.example.com/dir/path.file.txt"
-
-"""
-
-# Copyright (C) 2013, Olof Johansson <olof.johansson@axis.com>
-#
-# Based in part on bb.fetch2.wget:
-#    Copyright (C) 2003, 2004  Chris Larson
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Based on functions from the base bb module, Copyright 2003 Holger Schurig
-
-import os
-import bb
-import urllib
-import commands
-from bb import data
-from bb.fetch2 import URI
-from bb.fetch2 import FetchMethod
-from bb.fetch2 import runfetchcmd
-
-
-class SFTP(FetchMethod):
-    """Class to fetch urls via 'sftp'"""
-
-    def supports(self, url, ud, d):
-        """
-        Check to see if a given url can be fetched with sftp.
-        """
-        return ud.type in ['sftp']
-
-    def recommends_checksum(self, urldata):
-        return True
-
-    def urldata_init(self, ud, d):
-        if 'protocol' in ud.parm and ud.parm['protocol'] == 'git':
-            raise bb.fetch2.ParameterError(
-                "Invalid protocol - if you wish to fetch from a " +
-                "git repository using ssh, you need to use the " +
-                "git:// prefix with protocol=ssh", ud.url)
-
-        if 'downloadfilename' in ud.parm:
-            ud.basename = ud.parm['downloadfilename']
-        else:
-            ud.basename = os.path.basename(ud.path)
-
-        ud.localfile = data.expand(urllib.unquote(ud.basename), d)
-
-    def download(self, uri, ud, d):
-        """Fetch urls"""
-
-        urlo = URI(uri)
-        basecmd = 'sftp -oPasswordAuthentication=no'
-        port = ''
-        if urlo.port:
-            port = '-P %d' % urlo.port
-            urlo.port = None
-
-        dldir = data.getVar('DL_DIR', d, True)
-        lpath = os.path.join(dldir, ud.localfile)
-
-        user = ''
-        if urlo.userinfo:
-            user = urlo.userinfo + '@'
-
-        path = urlo.path
-
-        # Supoprt URIs relative to the user's home directory, with
-        # the tilde syntax. (E.g. <sftp://example.com/~/foo.diff>).
-        if path[:3] == '/~/':
-            path = path[3:]
-
-        remote = '%s%s:%s' % (user, urlo.hostname, path)
-
-        cmd = '%s %s %s %s' % (basecmd, port, commands.mkarg(remote),
-                               commands.mkarg(lpath))
-
-        bb.fetch2.check_network_access(d, cmd, uri)
-        runfetchcmd(cmd, d)
-        return True

bitbake/lib/bb/fetch2/ssh.py

@@ -10,12 +10,6 @@ IETF secsh internet draft:
     Currently does not support the sftp parameters, as this uses scp
     Also does not support the 'fingerprint' connection parameter.
 
-    Please note that '/' is used as host, path separator not ':' as you may 
-    be used to, also '~' can be used to specify user HOME, but again after '/'
-    
-    Example SRC_URI:
-    SRC_URI = "ssh://user@host.example.com/dir/path/file.txt"
-    SRC_URI = "ssh://user@host.example.com/~/file.txt"
 '''
 
 # Copyright (C) 2006  OpenedHand Ltd.
@@ -75,22 +69,15 @@ class SSH(FetchMethod):
     def supports(self, url, urldata, d):
         return __pattern__.match(url) != None
 
-    def supports_checksum(self, urldata):
-        return False
-
-    def urldata_init(self, urldata, d):
-        if 'protocol' in urldata.parm and urldata.parm['protocol'] == 'git':
-            raise bb.fetch2.ParameterError(
-                "Invalid protocol - if you wish to fetch from a git " +
-                "repository using ssh, you need to use " +
-                "git:// prefix with protocol=ssh", urldata.url)
+    def localpath(self, url, urldata, d):
         m = __pattern__.match(urldata.url)
         path = m.group('path')
         host = m.group('host')
-        urldata.localpath = os.path.join(d.getVar('DL_DIR', True), os.path.basename(path))
+        lpath = os.path.join(data.getVar('DL_DIR', d, True), host, os.path.basename(path))
+        return lpath
 
     def download(self, url, urldata, d):
-        dldir = d.getVar('DL_DIR', True)
+        dldir = data.getVar('DL_DIR', d, True)
 
         m = __pattern__.match(url)
         path = m.group('path')
@@ -99,10 +86,16 @@ class SSH(FetchMethod):
         user = m.group('user')
         password = m.group('pass')
 
+        ldir = os.path.join(dldir, host)
+        lpath = os.path.join(ldir, os.path.basename(path))
+
+        if not os.path.exists(ldir):
+            os.makedirs(ldir)
+
         if port:
-            portarg = '-P %s' % port
+            port = '-P %s' % port
         else:
-            portarg = ''
+            port = ''
 
         if user:
             fr = user
@@ -116,9 +109,9 @@ class SSH(FetchMethod):
 
         import commands
         cmd = 'scp -B -r %s %s %s/' % (
-            portarg,
+            port,
             commands.mkarg(fr),
-            commands.mkarg(dldir)
+            commands.mkarg(ldir)
         )
 
         bb.fetch2.check_network_access(d, cmd, urldata.url)

bitbake/lib/bb/fetch2/svk.py

@@ -77,8 +77,8 @@ class Svk(FetchMethod):
         logger.debug(2, "Fetch: creating temporary directory")
         bb.utils.mkdirhier(data.expand('${WORKDIR}', localdata))
         data.setVar('TMPBASE', data.expand('${WORKDIR}/oesvk.XXXXXX', localdata), localdata)
-        tmpfile, errors = bb.process.run(data.getVar('MKTEMPDIRCMD', localdata, True) or "false")
-        tmpfile = tmpfile.strip()
+        tmppipe = os.popen(data.getVar('MKTEMPDIRCMD', localdata, True) or "false")
+        tmpfile = tmppipe.readline().strip()
         if not tmpfile:
             logger.error()
             raise FetchError("Fetch: unable to create temporary directory.. make sure 'mktemp' is in the PATH.", loc)

bitbake/lib/bb/fetch2/svn.py

@@ -27,7 +27,6 @@ import os
 import sys
 import logging
 import bb
-import re
 from   bb import data
 from   bb.fetch2 import FetchMethod
 from   bb.fetch2 import FetchError
@@ -50,8 +49,6 @@ class Svn(FetchMethod):
         if not "module" in ud.parm:
             raise MissingParameterError('module', ud.url)
 
-        ud.basecmd = d.getVar('FETCHCMD_svn', True)
-
         ud.module = ud.parm["module"]
 
         # Create paths to svn checkouts
@@ -72,7 +69,9 @@ class Svn(FetchMethod):
         command is "fetch", "update", "info"
         """
 
-        proto = ud.parm.get('protocol', 'svn')
+        basecmd = data.expand('${FETCHCMD_svn}', d)
+
+        proto = ud.parm.get('proto', 'svn')
 
         svn_rsh = None
         if proto == "svn+ssh" and "rsh" in ud.parm:
@@ -89,9 +88,7 @@ class Svn(FetchMethod):
             options.append("--password %s" % ud.pswd)
 
         if command == "info":
-            svncmd = "%s info %s %s://%s/%s/" % (ud.basecmd, " ".join(options), proto, svnroot, ud.module)
-        elif command == "log1":
-            svncmd = "%s log --limit 1 %s %s://%s/%s/" % (ud.basecmd, " ".join(options), proto, svnroot, ud.module)
+            svncmd = "%s info %s %s://%s/%s/" % (basecmd, " ".join(options), proto, svnroot, ud.module)
         else:
             suffix = ""
             if ud.revision:
@@ -99,9 +96,9 @@ class Svn(FetchMethod):
                 suffix = "@%s" % (ud.revision)
 
             if command == "fetch":
-                svncmd = "%s co %s %s://%s/%s%s %s" % (ud.basecmd, " ".join(options), proto, svnroot, ud.module, suffix, ud.module)
+                svncmd = "%s co %s %s://%s/%s%s %s" % (basecmd, " ".join(options), proto, svnroot, ud.module, suffix, ud.module)
             elif command == "update":
-                svncmd = "%s update %s" % (ud.basecmd, " ".join(options))
+                svncmd = "%s update %s" % (basecmd, " ".join(options))
             else:
                 raise FetchError("Invalid svn command %s" % command, ud.url)
 
@@ -120,11 +117,6 @@ class Svn(FetchMethod):
             logger.info("Update " + loc)
             # update sources there
             os.chdir(ud.moddir)
-            # We need to attempt to run svn upgrade first in case its an older working format
-            try:
-                runfetchcmd(ud.basecmd + " upgrade", d)
-            except FetchError:
-                pass
             logger.debug(1, "Running %s", svnupdatecmd)
             bb.fetch2.check_network_access(d, svnupdatecmd, ud.url)
             runfetchcmd(svnupdatecmd, d)
@@ -168,13 +160,14 @@ class Svn(FetchMethod):
         """
         Return the latest upstream revision number
         """
-        bb.fetch2.check_network_access(d, self._buildsvncommand(ud, d, "log1"))
+        bb.fetch2.check_network_access(d, self._buildsvncommand(ud, d, "info"))
 
-        output = runfetchcmd("LANG=C LC_ALL=C " + self._buildsvncommand(ud, d, "log1"), d, True)
+        output = runfetchcmd("LANG=C LC_ALL=C " + self._buildsvncommand(ud, d, "info"), d, True)
 
-        # skip the first line, as per output of svn log
-        # then we expect the revision on the 2nd line
-        revision = re.search('^r([0-9]*)', output.splitlines()[1]).group(1)
+        revision = None
+        for line in output.splitlines():
+            if "Last Changed Rev" in line:
+                revision = line.split(":")[1].strip()
 
         return revision
 

bitbake/lib/bb/fetch2/wget.py

@@ -32,6 +32,8 @@ import urllib
 from   bb import data
 from   bb.fetch2 import FetchMethod
 from   bb.fetch2 import FetchError
+from   bb.fetch2 import encodeurl
+from   bb.fetch2 import decodeurl
 from   bb.fetch2 import logger
 from   bb.fetch2 import runfetchcmd
 
@@ -43,54 +45,46 @@ class Wget(FetchMethod):
         """
         return ud.type in ['http', 'https', 'ftp']
 
-    def recommends_checksum(self, urldata):
-        return True
-
     def urldata_init(self, ud, d):
-        if 'protocol' in ud.parm:
-            if ud.parm['protocol'] == 'git':
-                raise bb.fetch2.ParameterError("Invalid protocol - if you wish to fetch from a git repository using http, you need to instead use the git:// prefix with protocol=http", ud.url)
-
-        if 'downloadfilename' in ud.parm:
-            ud.basename = ud.parm['downloadfilename']
-        else:
-            ud.basename = os.path.basename(ud.path)
 
+        ud.basename = os.path.basename(ud.path)
         ud.localfile = data.expand(urllib.unquote(ud.basename), d)
 
     def download(self, uri, ud, d, checkonly = False):
         """Fetch urls"""
 
-        basecmd = d.getVar("FETCHCMD_wget", True) or "/usr/bin/env wget -t 2 -T 30 -nv --passive-ftp --no-check-certificate"
+        def fetch_uri(uri, ud, d):
+            if checkonly:
+                fetchcmd = data.getVar("CHECKCOMMAND", d, True)
+            elif os.path.exists(ud.localpath):
+                # file exists, but we didnt complete it.. trying again..
+                fetchcmd = data.getVar("RESUMECOMMAND", d, True)
+            else:
+                fetchcmd = data.getVar("FETCHCOMMAND", d, True)
 
-        if not checkonly and 'downloadfilename' in ud.parm:
-            dldir = d.getVar("DL_DIR", True)
-            bb.utils.mkdirhier(os.path.dirname(dldir + os.sep + ud.localfile))
-            basecmd += " -O " + dldir + os.sep + ud.localfile
+            uri = uri.split(";")[0]
+            uri_decoded = list(decodeurl(uri))
+            uri_type = uri_decoded[0]
+            uri_host = uri_decoded[1]
 
-        if checkonly:
-            fetchcmd = d.getVar("CHECKCOMMAND_wget", True) or d.expand(basecmd + " --spider '${URI}'")
-        elif os.path.exists(ud.localpath):
-            # file exists, but we didnt complete it.. trying again..
-            fetchcmd = d.getVar("RESUMECOMMAND_wget", True) or d.expand(basecmd + " -c -P ${DL_DIR} '${URI}'")
-        else:
-            fetchcmd = d.getVar("FETCHCOMMAND_wget", True) or d.expand(basecmd + " -P ${DL_DIR} '${URI}'")
-
-        uri = uri.split(";")[0]
-
-        fetchcmd = fetchcmd.replace("${URI}", uri.split(";")[0])
-        fetchcmd = fetchcmd.replace("${FILE}", ud.basename)
-        if not checkonly:
+            fetchcmd = fetchcmd.replace("${URI}", uri.split(";")[0])
+            fetchcmd = fetchcmd.replace("${FILE}", ud.basename)
             logger.info("fetch " + uri)
             logger.debug(2, "executing " + fetchcmd)
-        bb.fetch2.check_network_access(d, fetchcmd)
-        runfetchcmd(fetchcmd, d, quiet=checkonly)
+            bb.fetch2.check_network_access(d, fetchcmd)
+            runfetchcmd(fetchcmd, d)
 
-        # Sanity check since wget can pretend it succeed when it didn't
-        # Also, this used to happen if sourceforge sent us to the mirror page
-        if not os.path.exists(ud.localpath) and not checkonly:
-            raise FetchError("The fetch command returned success for url %s but %s doesn't exist?!" % (uri, ud.localpath), uri)
+            # Sanity check since wget can pretend it succeed when it didn't
+            # Also, this used to happen if sourceforge sent us to the mirror page
+            if not os.path.exists(ud.localpath) and not checkonly:
+                raise FetchError("The fetch command returned success for url %s but %s doesn't exist?!" % (uri, ud.localpath), uri)
 
+        localdata = data.createCopy(d)
+        data.setVar('OVERRIDES', "wget:" + data.getVar('OVERRIDES', localdata), localdata)
+        data.update_data(localdata)
+
+        fetch_uri(uri, ud, localdata)
+        
         return True
 
     def checkstatus(self, uri, ud, d):

bitbake/lib/bb/methodpool.py

@@ -17,7 +17,26 @@
 # with this program; if not, write to the Free Software Foundation, Inc.,
 # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 
+
+"""
+    What is a method pool?
+
+    BitBake has a global method scope where .bb, .inc and .bbclass
+    files can install methods. These methods are parsed from strings.
+    To avoid recompiling and executing these string we introduce
+    a method pool to do this task.
+
+    This pool will be used to compile and execute the functions. It
+    will be smart enough to
+"""
+
 from bb.utils import better_compile, better_exec
+from bb       import error
+
+# A dict of modules we have handled
+# it is the number of .bbclasses + x in size
+_parsed_methods = { }
+_parsed_fns     = { }
 
 def insert_method(modulename, code, fn):
     """
@@ -26,3 +45,40 @@ def insert_method(modulename, code, fn):
     """
     comp = better_compile(code, modulename, fn )
     better_exec(comp, None, code, fn)
+
+    # now some instrumentation
+    code = comp.co_names
+    for name in code:
+        if name in ['None', 'False']:
+            continue
+        elif name in _parsed_fns and not _parsed_fns[name] == modulename:
+            error( "Error Method already seen: %s in' %s' now in '%s'" % (name, _parsed_fns[name], modulename))
+        else:
+            _parsed_fns[name] = modulename
+
+def check_insert_method(modulename, code, fn):
+    """
+    Add the code if it wasnt added before. The module
+    name will be used for that
+
+    Variables:
+        @modulename a short name e.g. base.bbclass
+        @code The actual python code
+        @fn   The filename from the outer file
+    """
+    if not modulename in _parsed_methods:
+        return insert_method(modulename, code, fn)
+    _parsed_methods[modulename] = 1
+
+def parsed_module(modulename):
+    """
+    Inform me file xyz was parsed
+    """
+    return modulename in _parsed_methods
+
+
+def get_parsed_dict():
+    """
+    shortcut
+    """
+    return _parsed_methods

bitbake/lib/bb/monitordisk.py

@@ -1,265 +0,0 @@
-#!/usr/bin/env python
-# ex:ts=4:sw=4:sts=4:et
-# -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*-
-#
-# Copyright (C) 2012 Robert Yang
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-import os, logging, re, sys
-import bb
-logger = logging.getLogger("BitBake.Monitor")
-
-def printErr(info):
-    logger.error("%s\n       Disk space monitor will NOT be enabled" % info)
-
-def convertGMK(unit):
-
-    """ Convert the space unit G, M, K, the unit is case-insensitive """
-
-    unitG = re.match('([1-9][0-9]*)[gG]\s?$', unit)
-    if unitG:
-        return int(unitG.group(1)) * (1024 ** 3)
-    unitM = re.match('([1-9][0-9]*)[mM]\s?$', unit)
-    if unitM:
-        return int(unitM.group(1)) * (1024 ** 2)
-    unitK = re.match('([1-9][0-9]*)[kK]\s?$', unit)
-    if unitK:
-        return int(unitK.group(1)) * 1024
-    unitN = re.match('([1-9][0-9]*)\s?$', unit)
-    if unitN:
-        return int(unitN.group(1))
-    else:
-        return None
-
-def getMountedDev(path):
-
-    """ Get the device mounted at the path, uses /proc/mounts """
-
-    # Get the mount point of the filesystem containing path
-    # st_dev is the ID of device containing file
-    parentDev = os.stat(path).st_dev
-    currentDev = parentDev
-    # When the current directory's device is different from the
-    # parrent's, then the current directory is a mount point
-    while parentDev == currentDev:
-        mountPoint = path
-        # Use dirname to get the parrent's directory
-        path = os.path.dirname(path)
-        # Reach the "/"
-        if path == mountPoint:
-            break
-        parentDev= os.stat(path).st_dev
-
-    try:
-        with open("/proc/mounts", "r") as ifp:
-            for line in ifp:
-                procLines = line.rstrip('\n').split()
-                if procLines[1] == mountPoint:
-                    return procLines[0]
-    except EnvironmentError:
-        pass
-    return None
-
-def getDiskData(BBDirs, configuration):
-
-    """Prepare disk data for disk space monitor"""
-
-    # Save the device IDs, need the ID to be unique (the dictionary's key is
-    # unique), so that when more than one directories are located in the same
-    # device, we just monitor it once
-    devDict = {}
-    for pathSpaceInode in BBDirs.split():
-        # The input format is: "dir,space,inode", dir is a must, space
-        # and inode are optional
-        pathSpaceInodeRe = re.match('([^,]*),([^,]*),([^,]*),?(.*)', pathSpaceInode)
-        if not pathSpaceInodeRe:
-            printErr("Invalid value in BB_DISKMON_DIRS: %s" % pathSpaceInode)
-            return None
-
-        action = pathSpaceInodeRe.group(1)
-        if action not in ("ABORT", "STOPTASKS", "WARN"):
-            printErr("Unknown disk space monitor action: %s" % action)
-            return None
-
-        path = os.path.realpath(pathSpaceInodeRe.group(2))
-        if not path:
-            printErr("Invalid path value in BB_DISKMON_DIRS: %s" % pathSpaceInode)
-            return None
-
-        # The disk space or inode is optional, but it should have a correct
-        # value once it is specified
-        minSpace = pathSpaceInodeRe.group(3)
-        if minSpace:
-            minSpace = convertGMK(minSpace)
-            if not minSpace:
-                printErr("Invalid disk space value in BB_DISKMON_DIRS: %s" % pathSpaceInodeRe.group(3))
-                return None
-        else:
-            # None means that it is not specified
-            minSpace = None
-
-        minInode = pathSpaceInodeRe.group(4)
-        if minInode:
-            minInode = convertGMK(minInode)
-            if not minInode:
-                printErr("Invalid inode value in BB_DISKMON_DIRS: %s" % pathSpaceInodeRe.group(4))
-                return None
-        else:
-            # None means that it is not specified
-            minInode = None
-
-        if minSpace is None and minInode is None:
-            printErr("No disk space or inode value in found BB_DISKMON_DIRS: %s" % pathSpaceInode)
-            return None
-        # mkdir for the directory since it may not exist, for example the
-        # DL_DIR may not exist at the very beginning
-        if not os.path.exists(path):
-            bb.utils.mkdirhier(path)
-        dev = getMountedDev(path)
-        # Use path/action as the key
-        devDict[os.path.join(path, action)] = [dev, minSpace, minInode]
-
-    return devDict
-
-def getInterval(configuration):
-
-    """ Get the disk space interval """
-
-    # The default value is 50M and 5K.
-    spaceDefault = 50 * 1024 * 1024
-    inodeDefault = 5 * 1024
-
-    interval = configuration.getVar("BB_DISKMON_WARNINTERVAL", True)
-    if not interval:
-        return spaceDefault, inodeDefault
-    else:
-        # The disk space or inode interval is optional, but it should
-        # have a correct value once it is specified
-        intervalRe = re.match('([^,]*),?\s*(.*)', interval)
-        if intervalRe:
-            intervalSpace = intervalRe.group(1)
-            if intervalSpace:
-                intervalSpace = convertGMK(intervalSpace)
-                if not intervalSpace:
-                    printErr("Invalid disk space interval value in BB_DISKMON_WARNINTERVAL: %s" % intervalRe.group(1))
-                    return None, None
-            else:
-                intervalSpace = spaceDefault
-            intervalInode = intervalRe.group(2)
-            if intervalInode:
-                intervalInode = convertGMK(intervalInode)
-                if not intervalInode:
-                    printErr("Invalid disk inode interval value in BB_DISKMON_WARNINTERVAL: %s" % intervalRe.group(2))
-                    return None, None
-            else:
-                intervalInode = inodeDefault
-            return intervalSpace, intervalInode
-        else:
-            printErr("Invalid interval value in BB_DISKMON_WARNINTERVAL: %s" % interval)
-            return None, None
-
-class diskMonitor:
-
-    """Prepare the disk space monitor data"""
-
-    def __init__(self, configuration):
-
-        self.enableMonitor = False
-        self.configuration = configuration
-
-        BBDirs = configuration.getVar("BB_DISKMON_DIRS", True) or None
-        if BBDirs:
-            self.devDict = getDiskData(BBDirs, configuration)
-            if self.devDict:
-                self.spaceInterval, self.inodeInterval = getInterval(configuration)
-                if self.spaceInterval and self.inodeInterval:
-                    self.enableMonitor = True
-                    # These are for saving the previous disk free space and inode, we
-                    # use them to avoid print too many warning messages
-                    self.preFreeS = {}
-                    self.preFreeI = {}
-                    # This is for STOPTASKS and ABORT, to avoid print the message repeatly
-                    # during waiting the tasks to finish
-                    self.checked = {}
-                    for k in self.devDict:
-                        self.preFreeS[k] = 0
-                        self.preFreeI[k] = 0
-                        self.checked[k] = False
-                    if self.spaceInterval is None and self.inodeInterval is None:
-                        self.enableMonitor = False
-
-    def check(self, rq):
-
-        """ Take action for the monitor """
-
-        if self.enableMonitor:
-            for k in self.devDict:
-                path = os.path.dirname(k)
-                action = os.path.basename(k)
-                dev = self.devDict[k][0]
-                minSpace = self.devDict[k][1]
-                minInode = self.devDict[k][2]
-
-                st = os.statvfs(path)
-
-                # The free space, float point number
-                freeSpace = st.f_bavail * st.f_frsize
-
-                if minSpace and freeSpace < minSpace:
-                    # Always show warning, the self.checked would always be False if the action is WARN
-                    if self.preFreeS[k] == 0 or self.preFreeS[k] - freeSpace > self.spaceInterval and not self.checked[k]:
-                        logger.warn("The free space of %s (%s) is running low (%.3fGB left)" % \
-                                (path, dev, freeSpace / 1024 / 1024 / 1024.0))
-                        self.preFreeS[k] = freeSpace
-
-                    if action == "STOPTASKS" and not self.checked[k]:
-                        logger.error("No new tasks can be excuted since the disk space monitor action is \"STOPTASKS\"!")
-                        self.checked[k] = True
-                        rq.finish_runqueue(False)
-                        bb.event.fire(bb.event.DiskFull(dev, 'disk', freeSpace, path), self.configuration)
-                    elif action == "ABORT" and not self.checked[k]:
-                        logger.error("Immediately abort since the disk space monitor action is \"ABORT\"!")
-                        self.checked[k] = True
-                        rq.finish_runqueue(True)
-                        bb.event.fire(bb.event.DiskFull(dev, 'disk', freeSpace, path), self.configuration)
-
-                # The free inodes, float point number
-                freeInode = st.f_favail
-
-                if minInode and freeInode < minInode:
-                    # Some fs formats' (e.g., btrfs) statvfs.f_files (inodes) is
-                    # zero, this is a feature of the fs, we disable the inode
-                    # checking for such a fs.
-                    if st.f_files == 0:
-                        logger.warn("Inode check for %s is unavaliable, will remove it from disk monitor" % path)
-                        self.devDict[k][2] = None
-                        continue
-                    # Always show warning, the self.checked would always be False if the action is WARN
-                    if self.preFreeI[k] == 0 or self.preFreeI[k] - freeInode > self.inodeInterval and not self.checked[k]:
-                        logger.warn("The free inode of %s (%s) is running low (%.3fK left)" % \
-                                (path, dev, freeInode / 1024.0))
-                        self.preFreeI[k] = freeInode
-
-                    if action  == "STOPTASKS" and not self.checked[k]:
-                        logger.error("No new tasks can be excuted since the disk space monitor action is \"STOPTASKS\"!")
-                        self.checked[k] = True
-                        rq.finish_runqueue(False)
-                        bb.event.fire(bb.event.DiskFull(dev, 'inode', freeInode, path), self.configuration)
-                    elif action  == "ABORT" and not self.checked[k]:
-                        logger.error("Immediately abort since the disk space monitor action is \"ABORT\"!")
-                        self.checked[k] = True
-                        rq.finish_runqueue(True)
-                        bb.event.fire(bb.event.DiskFull(dev, 'inode', freeInode, path), self.configuration)
-        return

bitbake/lib/bb/msg.py

@@ -23,7 +23,6 @@ Message handling infrastructure for bitbake
 # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 
 import sys
-import copy
 import logging
 import collections
 from itertools import groupby
@@ -56,25 +55,6 @@ class BBLogFormatter(logging.Formatter):
         CRITICAL: 'ERROR',
     }
 
-    color_enabled = False
-    BASECOLOR, BLACK, RED, GREEN, YELLOW, BLUE, MAGENTA, CYAN, WHITE = range(29,38)
-
-    COLORS = {
-        DEBUG3  : CYAN,
-        DEBUG2  : CYAN,
-        DEBUG   : CYAN,
-        VERBOSE : BASECOLOR,
-        NOTE    : BASECOLOR,
-        PLAIN   : BASECOLOR,
-        WARNING : YELLOW,
-        ERROR   : RED,
-        CRITICAL: RED,
-    }
-
-    BLD = '\033[1;%dm'
-    STD = '\033[%dm'
-    RST = '\033[0m'
-
     def getLevelName(self, levelno):
         try:
             return self.levelnames[levelno]
@@ -87,8 +67,6 @@ class BBLogFormatter(logging.Formatter):
         if record.levelno == self.PLAIN:
             msg = record.getMessage()
         else:
-            if self.color_enabled:
-                record = self.colorize(record)
             msg = logging.Formatter.format(self, record)
 
         if hasattr(record, 'bb_exc_info'):
@@ -97,83 +75,130 @@ class BBLogFormatter(logging.Formatter):
             msg += '\n' + ''.join(formatted)
         return msg
 
-    def colorize(self, record):
-        color = self.COLORS[record.levelno]
-        if self.color_enabled and color is not None:
-            record = copy.copy(record)
-            record.levelname = "".join([self.BLD % color, record.levelname, self.RST])
-            record.msg = "".join([self.STD % color, record.msg, self.RST])
-        return record
+class Loggers(dict):
+    def __getitem__(self, key):
+        if key in self:
+            return dict.__getitem__(self, key)
+        else:
+            log = logging.getLogger("BitBake.%s" % domain._fields[key])
+            dict.__setitem__(self, key, log)
+            return log
 
-    def enable_color(self):
-        self.color_enabled = True
-
-class BBLogFilter(object):
-    def __init__(self, handler, level, debug_domains):
-        self.stdlevel = level
-        self.debug_domains = debug_domains
-        loglevel = level
-        for domain in debug_domains:
-            if debug_domains[domain] < loglevel:
-                loglevel = debug_domains[domain]
-        handler.setLevel(loglevel)
-        handler.addFilter(self)
-
-    def filter(self, record):
-        if record.levelno >= self.stdlevel:
-            return True
-        if record.name in self.debug_domains and record.levelno >= self.debug_domains[record.name]:
-            return True
-        return False
+class DebugLevel(dict):
+    def __getitem__(self, key):
+        if key == "default":
+            key = domain.Default
+        return get_debug_level(key)
 
+def _NamedTuple(name, fields):
+    Tuple = collections.namedtuple(name, " ".join(fields))
+    return Tuple(*range(len(fields)))
 
+domain = _NamedTuple("Domain", (
+    "Default",
+    "Build",
+    "Cache",
+    "Collection",
+    "Data",
+    "Depends",
+    "Fetcher",
+    "Parsing",
+    "PersistData",
+    "Provider",
+    "RunQueue",
+    "TaskData",
+    "Util"))
+logger = logging.getLogger("BitBake")
+loggers = Loggers()
+debug_level = DebugLevel()
 
 # Message control functions
 #
 
-loggerDefaultDebugLevel = 0
-loggerDefaultVerbose = False
-loggerVerboseLogs = False
-loggerDefaultDomains = []
+def set_debug_level(level):
+    for log in loggers.itervalues():
+        log.setLevel(logging.NOTSET)
 
-def init_msgconfig(verbose, debug, debug_domains = []):
-    """
-    Set default verbosity and debug levels config the logger
-    """
-    bb.msg.loggerDefaultDebugLevel = debug
-    bb.msg.loggerDefaultVerbose = verbose
-    if verbose:
-        bb.msg.loggerVerboseLogs = True
-    bb.msg.loggerDefaultDomains = debug_domains
-
-def addDefaultlogFilter(handler):
-
-    debug = loggerDefaultDebugLevel
-    verbose = loggerDefaultVerbose
-    domains = loggerDefaultDomains
-
-    if debug:
-        level = BBLogFormatter.DEBUG - debug + 1
-    elif verbose:
-        level = BBLogFormatter.VERBOSE
+    if level:
+        logger.setLevel(logging.DEBUG - level + 1)
     else:
-        level = BBLogFormatter.NOTE
+        logger.setLevel(logging.INFO)
 
-    debug_domains = {}
-    for (domainarg, iterator) in groupby(domains):
-        dlevel = len(tuple(iterator))
-        debug_domains["BitBake.%s" % domainarg] = logging.DEBUG - dlevel + 1
+def get_debug_level(msgdomain = domain.Default):
+    if not msgdomain:
+        level = logger.getEffectiveLevel()
+    else:
+        level = loggers[msgdomain].getEffectiveLevel()
+    return max(0, logging.DEBUG - level + 1)
 
-    BBLogFilter(handler, level, debug_domains)
+def set_verbose(level):
+    if level:
+        logger.setLevel(BBLogFormatter.VERBOSE)
+    else:
+        logger.setLevel(BBLogFormatter.INFO)
+
+def set_debug_domains(domainargs):
+    for (domainarg, iterator) in groupby(domainargs):
+        for index, msgdomain in enumerate(domain._fields):
+            if msgdomain == domainarg:
+                level = len(tuple(iterator))
+                if level:
+                    loggers[index].setLevel(logging.DEBUG - level + 1)
+                break
+        else:
+            warn(None, "Logging domain %s is not valid, ignoring" % domainarg)
 
 #
 # Message handling functions
 #
 
-def fatal(msgdomain, msg):
-    if msgdomain:
-        logger = logging.getLogger("BitBake.%s" % msgdomain)
+def debug(level, msgdomain, msg):
+    warnings.warn("bb.msg.debug is deprecated in favor of the python 'logging' module",
+                  DeprecationWarning, stacklevel=2)
+    level = logging.DEBUG - (level - 1)
+    if not msgdomain:
+        logger.debug(level, msg)
     else:
-        logger = logging.getLogger("BitBake")
-    logger.critical(msg)
+        loggers[msgdomain].debug(level, msg)
+
+def plain(msg):
+    warnings.warn("bb.msg.plain is deprecated in favor of the python 'logging' module",
+                  DeprecationWarning, stacklevel=2)
+    logger.plain(msg)
+
+def note(level, msgdomain, msg):
+    warnings.warn("bb.msg.note is deprecated in favor of the python 'logging' module",
+                  DeprecationWarning, stacklevel=2)
+    if level > 1:
+        if msgdomain:
+            logger.verbose(msg)
+        else:
+            loggers[msgdomain].verbose(msg)
+    else:
+        if msgdomain:
+            logger.info(msg)
+        else:
+            loggers[msgdomain].info(msg)
+
+def warn(msgdomain, msg):
+    warnings.warn("bb.msg.warn is deprecated in favor of the python 'logging' module",
+                  DeprecationWarning, stacklevel=2)
+    if not msgdomain:
+        logger.warn(msg)
+    else:
+        loggers[msgdomain].warn(msg)
+
+def error(msgdomain, msg):
+    warnings.warn("bb.msg.error is deprecated in favor of the python 'logging' module",
+                  DeprecationWarning, stacklevel=2)
+    if not msgdomain:
+        logger.error(msg)
+    else:
+        loggers[msgdomain].error(msg)
+
+def fatal(msgdomain, msg):
+    if not msgdomain:
+        logger.critical(msg)
+    else:
+        loggers[msgdomain].critical(msg)
     sys.exit(1)

bitbake/lib/bb/parse/__init__.py

@@ -37,17 +37,6 @@ logger = logging.getLogger("BitBake.Parsing")
 
 class ParseError(Exception):
     """Exception raised when parsing fails"""
-    def __init__(self, msg, filename, lineno=0):
-        self.msg = msg
-        self.filename = filename
-        self.lineno = lineno
-        Exception.__init__(self, msg, filename, lineno)
-
-    def __str__(self):
-        if self.lineno:
-            return "ParseError at %s:%d: %s" % (self.filename, self.lineno, self.msg)
-        else:
-            return "ParseError in %s: %s" % (self.filename, self.msg)
 
 class SkipPackage(Exception):
     """Exception raised to skip this package"""
@@ -73,8 +62,9 @@ def update_mtime(f):
 def mark_dependency(d, f):
     if f.startswith('./'):
         f = "%s/%s" % (os.getcwd(), f[2:])
-    deps = (d.getVar('__depends') or []) + [(f, cached_mtime(f))]
-    d.setVar('__depends', deps)
+    deps = bb.data.getVar('__depends', d) or set()
+    deps.update([(f, cached_mtime(f))])
+    bb.data.setVar('__depends', deps, d)
 
 def supports(fn, data):
     """Returns true if we have a handler for this file, false otherwise"""
@@ -87,9 +77,8 @@ def handle(fn, data, include = 0):
     """Call the handler that is appropriate for this file"""
     for h in handlers:
         if h['supports'](fn, data):
-            with data.inchistory.include(fn):
-                return h['handle'](fn, data, include)
-    raise ParseError("not a BitBake file", fn)
+            return h['handle'](fn, data, include)
+    raise ParseError("%s is not a BitBake file" % fn)
 
 def init(fn, data):
     for h in handlers:
@@ -101,7 +90,7 @@ def init_parser(d):
 
 def resolve_file(fn, d):
     if not os.path.isabs(fn):
-        bbpath = d.getVar("BBPATH", True)
+        bbpath = bb.data.getVar("BBPATH", d, True)
         newfn = bb.utils.which(bbpath, fn)
         if not newfn:
             raise IOError("file %s not found in %s" % (fn, bbpath))
@@ -122,7 +111,7 @@ def vars_from_file(mypkg, d):
     parts = myfile[0].split('_')
     __pkgsplit_cache__[mypkg] = parts
     if len(parts) > 3:
-        raise ParseError("Unable to generate default variables from filename (too many underscores)", mypkg)
+        raise ParseError("Unable to generate default variables from the filename: %s (too many underscores)" % mypkg)
     exp = 3 - len(parts)
     tmplist = []
     while exp != 0:
@@ -131,13 +120,4 @@ def vars_from_file(mypkg, d):
     parts.extend(tmplist)
     return parts
 
-def get_file_depends(d):
-    '''Return the dependent files'''
-    dep_files = []
-    depends = d.getVar('__base_depends', True) or []
-    depends = depends + (d.getVar('__depends', True) or [])
-    for (fn, _) in depends:
-        dep_files.append(os.path.abspath(fn))
-    return " ".join(dep_files)
-
 from bb.parse.parse_py import __version__, ConfHandler, BBHandler

bitbake/lib/bb/parse/ast.py

@@ -31,6 +31,7 @@ import itertools
 from bb import methodpool
 from bb.parse import logger
 
+__parsed_methods__ = bb.methodpool.get_parsed_dict()
 _bbversions_re = re.compile(r"\[(?P<from>[0-9]+)-(?P<to>[0-9]+)\]")
 
 class StatementGroup(list):
@@ -53,14 +54,14 @@ class IncludeNode(AstNode):
         """
         Include the file and evaluate the statements
         """
-        s = data.expand(self.what_file)
+        s = bb.data.expand(self.what_file, data)
         logger.debug(2, "CONF %s:%s: including %s", self.filename, self.lineno, s)
 
         # TODO: Cache those includes... maybe not here though
         if self.force:
-            bb.parse.ConfHandler.include(self.filename, s, self.lineno, data, "include required")
+            bb.parse.ConfHandler.include(self.filename, s, data, "include required")
         else:
-            bb.parse.ConfHandler.include(self.filename, s, self.lineno, data, False)
+            bb.parse.ConfHandler.include(self.filename, s, data, False)
 
 class ExportNode(AstNode):
     def __init__(self, filename, lineno, var):
@@ -68,7 +69,7 @@ class ExportNode(AstNode):
         self.var = var
 
     def eval(self, data):
-        data.setVarFlag(self.var, "export", 1, op = 'exported')
+        bb.data.setVarFlag(self.var, "export", 1, data)
 
 class DataNode(AstNode):
     """
@@ -90,53 +91,33 @@ class DataNode(AstNode):
     def eval(self, data):
         groupd = self.groupd
         key = groupd["var"]
-        loginfo = {
-            'variable': key,
-            'file': self.filename,
-            'line': self.lineno,
-        }
         if "exp" in groupd and groupd["exp"] != None:
-            data.setVarFlag(key, "export", 1, op = 'exported', **loginfo)
-
-        op = "set"
+            bb.data.setVarFlag(key, "export", 1, data)
         if "ques" in groupd and groupd["ques"] != None:
             val = self.getFunc(key, data)
-            op = "set?"
             if val == None:
                 val = groupd["value"]
         elif "colon" in groupd and groupd["colon"] != None:
             e = data.createCopy()
             bb.data.update_data(e)
-            op = "immediate"
-            val = e.expand(groupd["value"], key + "[:=]")
+            val = bb.data.expand(groupd["value"], e, key + "[:=]")
         elif "append" in groupd and groupd["append"] != None:
-            op = "append"
             val = "%s %s" % ((self.getFunc(key, data) or ""), groupd["value"])
         elif "prepend" in groupd and groupd["prepend"] != None:
-            op = "prepend"
             val = "%s %s" % (groupd["value"], (self.getFunc(key, data) or ""))
         elif "postdot" in groupd and groupd["postdot"] != None:
-            op = "postdot"
             val = "%s%s" % ((self.getFunc(key, data) or ""), groupd["value"])
         elif "predot" in groupd and groupd["predot"] != None:
-            op = "predot"
             val = "%s%s" % (groupd["value"], (self.getFunc(key, data) or ""))
         else:
             val = groupd["value"]
 
-        flag = None
         if 'flag' in groupd and groupd['flag'] != None:
-            flag = groupd['flag']
+            bb.data.setVarFlag(key, groupd['flag'], val, data)
         elif groupd["lazyques"]:
-            flag = "defaultval"
-
-        loginfo['op'] = op
-        loginfo['detail'] = groupd["value"]
-
-        if flag:
-            data.setVarFlag(key, flag, val, **loginfo)
+            bb.data.setVarFlag(key, "defaultval", val, data)
         else:
-            data.setVar(key, val, **loginfo)
+            bb.data.setVar(key, val, data)
 
 class MethodNode(AstNode):
     def __init__(self, filename, lineno, func_name, body):
@@ -145,24 +126,23 @@ class MethodNode(AstNode):
         self.body = body
 
     def eval(self, data):
-        text = '\n'.join(self.body)
         if self.func_name == "__anonymous":
             funcname = ("__anon_%s_%s" % (self.lineno, self.filename.translate(string.maketrans('/.+-', '____'))))
-            text = "def %s(d):\n" % (funcname) + text
-            bb.methodpool.insert_method(funcname, text, self.filename)
-            anonfuncs = data.getVar('__BBANONFUNCS') or []
+            if not funcname in bb.methodpool._parsed_fns:
+                text = "def %s(d):\n" % (funcname) + '\n'.join(self.body)
+                bb.methodpool.insert_method(funcname, text, self.filename)
+            anonfuncs = bb.data.getVar('__BBANONFUNCS', data) or []
             anonfuncs.append(funcname)
-            data.setVar('__BBANONFUNCS', anonfuncs)
-            data.setVar(funcname, text)
+            bb.data.setVar('__BBANONFUNCS', anonfuncs, data)
         else:
-            data.setVarFlag(self.func_name, "func", 1)
-            data.setVar(self.func_name, text)
+            bb.data.setVarFlag(self.func_name, "func", 1, data)
+            bb.data.setVar(self.func_name, '\n'.join(self.body), data)
 
 class PythonMethodNode(AstNode):
-    def __init__(self, filename, lineno, function, modulename, body):
+    def __init__(self, filename, lineno, function, define, body):
         AstNode.__init__(self, filename, lineno)
         self.function = function
-        self.modulename = modulename
+        self.define = define
         self.body = body
 
     def eval(self, data):
@@ -170,10 +150,11 @@ class PythonMethodNode(AstNode):
         # 'this' file. This means we will not parse methods from
         # bb classes twice
         text = '\n'.join(self.body)
-        bb.methodpool.insert_method(self.modulename, text, self.filename)
-        data.setVarFlag(self.function, "func", 1)
-        data.setVarFlag(self.function, "python", 1)
-        data.setVar(self.function, text)
+        if not bb.methodpool.parsed_module(self.define):
+            bb.methodpool.insert_method(self.define, text, self.filename)
+        bb.data.setVarFlag(self.function, "func", 1, data)
+        bb.data.setVarFlag(self.function, "python", 1, data)
+        bb.data.setVar(self.function, text, data)
 
 class MethodFlagsNode(AstNode):
     def __init__(self, filename, lineno, key, m):
@@ -182,50 +163,59 @@ class MethodFlagsNode(AstNode):
         self.m = m
 
     def eval(self, data):
-        if data.getVar(self.key):
+        if bb.data.getVar(self.key, data):
             # clean up old version of this piece of metadata, as its
             # flags could cause problems
-            data.setVarFlag(self.key, 'python', None)
-            data.setVarFlag(self.key, 'fakeroot', None)
+            bb.data.setVarFlag(self.key, 'python', None, data)
+            bb.data.setVarFlag(self.key, 'fakeroot', None, data)
         if self.m.group("py") is not None:
-            data.setVarFlag(self.key, "python", "1")
+            bb.data.setVarFlag(self.key, "python", "1", data)
         else:
-            data.delVarFlag(self.key, "python")
+            bb.data.delVarFlag(self.key, "python", data)
         if self.m.group("fr") is not None:
-            data.setVarFlag(self.key, "fakeroot", "1")
+            bb.data.setVarFlag(self.key, "fakeroot", "1", data)
         else:
-            data.delVarFlag(self.key, "fakeroot")
+            bb.data.delVarFlag(self.key, "fakeroot", data)
 
 class ExportFuncsNode(AstNode):
-    def __init__(self, filename, lineno, fns, classname):
+    def __init__(self, filename, lineno, fns, classes):
         AstNode.__init__(self, filename, lineno)
         self.n = fns.split()
-        self.classname = classname
+        self.classes = classes
 
     def eval(self, data):
+        for f in self.n:
+            allvars = []
+            allvars.append(f)
+            allvars.append(self.classes[-1] + "_" + f)
 
-        for func in self.n:
-            calledfunc = self.classname + "_" + func
+            vars = [[ allvars[0], allvars[1] ]]
+            if len(self.classes) > 1 and self.classes[-2] is not None:
+                allvars.append(self.classes[-2] + "_" + f)
+                vars = []
+                vars.append([allvars[2], allvars[1]])
+                vars.append([allvars[0], allvars[2]])
 
-            if data.getVar(func) and not data.getVarFlag(func, 'export_func'):
-                continue
+            for (var, calledvar) in vars:
+                if bb.data.getVar(var, data) and not bb.data.getVarFlag(var, 'export_func', data):
+                    continue
 
-            if data.getVar(func):
-                data.setVarFlag(func, 'python', None)
-                data.setVarFlag(func, 'func', None)
+                if bb.data.getVar(var, data):
+                    bb.data.setVarFlag(var, 'python', None, data)
+                    bb.data.setVarFlag(var, 'func', None, data)
 
-            for flag in [ "func", "python" ]:
-                if data.getVarFlag(calledfunc, flag):
-                    data.setVarFlag(func, flag, data.getVarFlag(calledfunc, flag))
-            for flag in [ "dirs" ]:
-                if data.getVarFlag(func, flag):
-                    data.setVarFlag(calledfunc, flag, data.getVarFlag(func, flag))
+                for flag in [ "func", "python" ]:
+                    if bb.data.getVarFlag(calledvar, flag, data):
+                        bb.data.setVarFlag(var, flag, bb.data.getVarFlag(calledvar, flag, data), data)
+                for flag in [ "dirs" ]:
+                    if bb.data.getVarFlag(var, flag, data):
+                        bb.data.setVarFlag(calledvar, flag, bb.data.getVarFlag(var, flag, data), data)
 
-            if data.getVarFlag(calledfunc, "python"):
-                data.setVar(func, "    bb.build.exec_func('" + calledfunc + "', d)\n")
-            else:
-                data.setVar(func, "    " + calledfunc + "\n")
-            data.setVarFlag(func, 'export_func', '1')
+                if bb.data.getVarFlag(calledvar, "python", data):
+                    bb.data.setVar(var, "\tbb.build.exec_func('" + calledvar + "', d)\n", data)
+                else:
+                    bb.data.setVar(var, "\t" + calledvar + "\n", data)
+                bb.data.setVarFlag(var, 'export_func', '1', data)
 
 class AddTaskNode(AstNode):
     def __init__(self, filename, lineno, func, before, after):
@@ -239,25 +229,25 @@ class AddTaskNode(AstNode):
         if self.func[:3] != "do_":
             var = "do_" + self.func
 
-        data.setVarFlag(var, "task", 1)
-        bbtasks = data.getVar('__BBTASKS') or []
+        bb.data.setVarFlag(var, "task", 1, data)
+        bbtasks = bb.data.getVar('__BBTASKS', data) or []
         if not var in bbtasks:
             bbtasks.append(var)
-        data.setVar('__BBTASKS', bbtasks)
+        bb.data.setVar('__BBTASKS', bbtasks, data)
 
-        existing = data.getVarFlag(var, "deps") or []
+        existing = bb.data.getVarFlag(var, "deps", data) or []
         if self.after is not None:
             # set up deps for function
             for entry in self.after.split():
                 if entry not in existing:
                     existing.append(entry)
-        data.setVarFlag(var, "deps", existing)
+        bb.data.setVarFlag(var, "deps", existing, data)
         if self.before is not None:
             # set up things that depend on this func
             for entry in self.before.split():
-                existing = data.getVarFlag(entry, "deps") or []
+                existing = bb.data.getVarFlag(entry, "deps", data) or []
                 if var not in existing:
-                    data.setVarFlag(entry, "deps", [var] + existing)
+                    bb.data.setVarFlag(entry, "deps", [var] + existing, data)
 
 class BBHandlerNode(AstNode):
     def __init__(self, filename, lineno, fns):
@@ -265,11 +255,11 @@ class BBHandlerNode(AstNode):
         self.hs = fns.split()
 
     def eval(self, data):
-        bbhands = data.getVar('__BBHANDLERS') or []
+        bbhands = bb.data.getVar('__BBHANDLERS', data) or []
         for h in self.hs:
             bbhands.append(h)
-            data.setVarFlag(h, "handler", 1)
-        data.setVar('__BBHANDLERS', bbhands)
+            bb.data.setVarFlag(h, "handler", 1, data)
+        bb.data.setVar('__BBHANDLERS', bbhands, data)
 
 class InheritNode(AstNode):
     def __init__(self, filename, lineno, classes):
@@ -277,7 +267,7 @@ class InheritNode(AstNode):
         self.classes = classes
 
     def eval(self, data):
-        bb.parse.BBHandler.inherit(self.classes, self.filename, self.lineno, data)
+        bb.parse.BBHandler.inherit(self.classes, data)
 
 def handleInclude(statements, filename, lineno, m, force):
     statements.append(IncludeNode(filename, lineno, m.group(1), force))
@@ -291,14 +281,14 @@ def handleData(statements, filename, lineno, groupd):
 def handleMethod(statements, filename, lineno, func_name, body):
     statements.append(MethodNode(filename, lineno, func_name, body))
 
-def handlePythonMethod(statements, filename, lineno, funcname, modulename, body):
-    statements.append(PythonMethodNode(filename, lineno, funcname, modulename, body))
+def handlePythonMethod(statements, filename, lineno, funcname, root, body):
+    statements.append(PythonMethodNode(filename, lineno, funcname, root, body))
 
 def handleMethodFlags(statements, filename, lineno, key, m):
     statements.append(MethodFlagsNode(filename, lineno, key, m))
 
-def handleExportFuncs(statements, filename, lineno, m, classname):
-    statements.append(ExportFuncsNode(filename, lineno, m.group(1), classname))
+def handleExportFuncs(statements, filename, lineno, m, classes):
+    statements.append(ExportFuncsNode(filename, lineno, m.group(1), classes))
 
 def handleAddTask(statements, filename, lineno, m):
     func = m.group("func")
@@ -314,13 +304,13 @@ def handleBBHandlers(statements, filename, lineno, m):
 
 def handleInherit(statements, filename, lineno, m):
     classes = m.group(1)
-    statements.append(InheritNode(filename, lineno, classes))
+    statements.append(InheritNode(filename, lineno, classes.split()))
 
 def finalize(fn, d, variant = None):
     all_handlers = {}
-    for var in d.getVar('__BBHANDLERS') or []:
+    for var in bb.data.getVar('__BBHANDLERS', d) or []:
         # try to add the handler
-        handler = d.getVar(var)
+        handler = bb.data.getVar(var, d)
         bb.event.register(var, handler)
 
     bb.event.fire(bb.event.RecipePreFinalise(fn), d)
@@ -328,18 +318,16 @@ def finalize(fn, d, variant = None):
     bb.data.expandKeys(d)
     bb.data.update_data(d)
     code = []
-    for funcname in d.getVar("__BBANONFUNCS") or []:
+    for funcname in bb.data.getVar("__BBANONFUNCS", d) or []:
         code.append("%s(d)" % funcname)
-    bb.utils.better_exec("\n".join(code), {"d": d})
+    bb.utils.simple_exec("\n".join(code), {"d": d})
     bb.data.update_data(d)
 
-    tasklist = d.getVar('__BBTASKS') or []
+    tasklist = bb.data.getVar('__BBTASKS', d) or []
     bb.build.add_tasks(tasklist, d)
 
     bb.parse.siggen.finalise(fn, d, variant)
 
-    d.setVar('BBINCLUDED', bb.parse.get_file_depends(d))
-
     bb.event.fire(bb.event.RecipeParsed(fn), d)
 
 def _create_variants(datastores, names, function):
@@ -390,7 +378,7 @@ def multi_finalize(fn, d):
     try:
         finalize(fn, d)
     except bb.parse.SkipPackage as e:
-        d.setVar("__SKIPPED", e.args[0])
+        bb.data.setVar("__SKIPPED", e.args[0], d)
     datastores = {"": safe_d}
 
     versions = (d.getVar("BBVERSIONS", True) or "").split()
@@ -433,7 +421,7 @@ def multi_finalize(fn, d):
             try:
                 finalize(fn, d)
             except bb.parse.SkipPackage as e:
-                d.setVar("__SKIPPED", e.args[0])
+                bb.data.setVar("__SKIPPED", e.args[0], d)
 
         _create_variants(datastores, versions, verfunc)
 
@@ -462,7 +450,7 @@ def multi_finalize(fn, d):
                 d.setVar("BBEXTENDVARIANT", variantmap[name])
             else:
                 d.setVar("PN", "%s-%s" % (pn, name))
-            bb.parse.BBHandler.inherit(extendedmap[name], fn, 0, d)
+            bb.parse.BBHandler.inherit([extendedmap[name]], d)
 
         safe_d.setVar("BBCLASSEXTEND", extended)
         _create_variants(datastores, extendedmap.keys(), extendfunc)
@@ -473,7 +461,7 @@ def multi_finalize(fn, d):
                 if not onlyfinalise or variant in onlyfinalise:
                     finalize(fn, variant_d, variant)
             except bb.parse.SkipPackage as e:
-                variant_d.setVar("__SKIPPED", e.args[0])
+                bb.data.setVar("__SKIPPED", e.args[0], variant_d)
 
     if len(datastores) > 1:
         variants = filter(None, datastores.iterkeys())

bitbake/lib/bb/parse/parse_py/BBHandler.py

@@ -51,6 +51,7 @@ __infunc__ = ""
 __inpython__ = False
 __body__   = []
 __classname__ = ""
+classes = [ None, ]
 
 cached_statements = {}
 
@@ -67,26 +68,21 @@ def supports(fn, d):
     """Return True if fn has a supported extension"""
     return os.path.splitext(fn)[-1] in [".bb", ".bbclass", ".inc"]
 
-def inherit(files, fn, lineno, d):
-    __inherit_cache = d.getVar('__inherit_cache') or []
-    files = d.expand(files).split()
+def inherit(files, d):
+    __inherit_cache = data.getVar('__inherit_cache', d) or []
+    fn = ""
+    lineno = 0
     for file in files:
+        file = data.expand(file, d)
         if not os.path.isabs(file) and not file.endswith(".bbclass"):
             file = os.path.join('classes', '%s.bbclass' % file)
 
-        if not os.path.isabs(file):
-            dname = os.path.dirname(fn)
-            bbpath = "%s:%s" % (dname, d.getVar("BBPATH", True))
-            abs_fn = bb.utils.which(bbpath, file)
-            if abs_fn:
-                file = abs_fn
-
         if not file in __inherit_cache:
             logger.log(logging.DEBUG -1, "BB %s:%d: inheriting %s", fn, lineno, file)
             __inherit_cache.append( file )
-            d.setVar('__inherit_cache', __inherit_cache)
-            include(fn, file, lineno, d, "inherit")
-            __inherit_cache = d.getVar('__inherit_cache') or []
+            data.setVar('__inherit_cache', __inherit_cache, d)
+            include(fn, file, d, "inherit")
+            __inherit_cache = data.getVar('__inherit_cache', d) or []
 
 def get_statements(filename, absolute_filename, base_name):
     global cached_statements
@@ -113,7 +109,7 @@ def get_statements(filename, absolute_filename, base_name):
         return statements
 
 def handle(fn, d, include):
-    global __func_start_regexp__, __inherit_regexp__, __export_func_regexp__, __addtask_regexp__, __addhandler_regexp__, __infunc__, __body__, __residue__, __classname__
+    global __func_start_regexp__, __inherit_regexp__, __export_func_regexp__, __addtask_regexp__, __addhandler_regexp__, __infunc__, __body__, __residue__
     __body__ = []
     __infunc__ = ""
     __classname__ = ""
@@ -131,13 +127,14 @@ def handle(fn, d, include):
 
     if ext == ".bbclass":
         __classname__ = root
-        __inherit_cache = d.getVar('__inherit_cache') or []
+        classes.append(__classname__)
+        __inherit_cache = data.getVar('__inherit_cache', d) or []
         if not fn in __inherit_cache:
             __inherit_cache.append(fn)
-            d.setVar('__inherit_cache', __inherit_cache)
+            data.setVar('__inherit_cache', __inherit_cache, d)
 
     if include != 0:
-        oldfile = d.getVar('FILE')
+        oldfile = data.getVar('FILE', d)
     else:
         oldfile = None
 
@@ -151,25 +148,27 @@ def handle(fn, d, include):
 
     # DONE WITH PARSING... time to evaluate
     if ext != ".bbclass":
-        d.setVar('FILE', abs_fn)
+        data.setVar('FILE', fn, d)
 
-    try:
-        statements.eval(d)
-    except bb.parse.SkipPackage:
-        bb.data.setVar("__SKIPPED", True, d)
+    statements.eval(d)
+
+    if ext == ".bbclass":
+        classes.remove(__classname__)
+    else:
         if include == 0:
-            return { "" : d }
-
-    if ext != ".bbclass" and include == 0:
-        return ast.multi_finalize(fn, d)
+            return ast.multi_finalize(fn, d)
 
     if oldfile:
-        d.setVar("FILE", oldfile)
+        bb.data.setVar("FILE", oldfile, d)
+
+    # we have parsed the bb class now
+    if ext == ".bbclass" or ext == ".inc":
+        bb.methodpool.get_parsed_dict()[base_name] = 1
 
     return d
 
 def feeder(lineno, s, fn, root, statements):
-    global __func_start_regexp__, __inherit_regexp__, __export_func_regexp__, __addtask_regexp__, __addhandler_regexp__, __def_regexp__, __python_func_regexp__, __inpython__, __infunc__, __body__, bb, __residue__, __classname__
+    global __func_start_regexp__, __inherit_regexp__, __export_func_regexp__, __addtask_regexp__, __addhandler_regexp__, __def_regexp__, __python_func_regexp__, __inpython__, __infunc__, __body__, classes, bb, __residue__
     if __infunc__:
         if s == '}':
             __body__.append('')
@@ -194,24 +193,22 @@ def feeder(lineno, s, fn, root, statements):
             if lineno == IN_PYTHON_EOF:
                 return
 
-    if s and s[0] == '#':
+
+    # Skip empty lines
+    if s == '':
+        return          
+
+    if s[0] == '#':
         if len(__residue__) != 0 and __residue__[0][0] != "#":
-            bb.fatal("There is a comment on line %s of file %s (%s) which is in the middle of a multiline expression.\nBitbake used to ignore these but no longer does so, please fix your metadata as errors are likely as a result of this change." % (lineno, fn, s))
+            bb.error("There is a comment on line %s of file %s (%s) which is in the middle of a multiline expression.\nBitbake used to ignore these but no longer does so, please fix your metadata as errors are likely as a result of this change." % (lineno, fn, s))
 
-    if len(__residue__) != 0 and __residue__[0][0] == "#" and (not s or s[0] != "#"):
-        bb.fatal("There is a confusing multiline, partially commented expression on line %s of file %s (%s).\nPlease clarify whether this is all a comment or should be parsed." % (lineno, fn, s))
-
-    if s and s[-1] == '\\':
+    if s[-1] == '\\':
         __residue__.append(s[:-1])
         return
 
     s = "".join(__residue__) + s
     __residue__ = []
 
-    # Skip empty lines
-    if s == '':
-        return   
-
     # Skip comments
     if s[0] == '#':
         return
@@ -231,7 +228,7 @@ def feeder(lineno, s, fn, root, statements):
 
     m = __export_func_regexp__.match(s)
     if m:
-        ast.handleExportFuncs(statements, fn, lineno, m, __classname__)
+        ast.handleExportFuncs(statements, fn, lineno, m, classes)
         return
 
     m = __addtask_regexp__.match(s)

bitbake/lib/bb/parse/parse_py/ConfHandler.py

@@ -24,64 +24,41 @@
 # with this program; if not, write to the Free Software Foundation, Inc.,
 # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 
-import re, os
+import re, bb.data, os
 import logging
 import bb.utils
 from bb.parse import ParseError, resolve_file, ast, logger
 
-__config_regexp__  = re.compile( r"""
-    ^
-    (?P<exp>export\s*)?
-    (?P<var>[a-zA-Z0-9\-~_+.${}/]+?)
-    (\[(?P<flag>[a-zA-Z0-9\-_+.]+)\])?
-
-    \s* (
-        (?P<colon>:=) |
-        (?P<lazyques>\?\?=) |
-        (?P<ques>\?=) |
-        (?P<append>\+=) |
-        (?P<prepend>=\+) |
-        (?P<predot>=\.) |
-        (?P<postdot>\.=) |
-        =
-    ) \s*
-
-    (?!'[^']*'[^']*'$)
-    (?!\"[^\"]*\"[^\"]*\"$)
-    (?P<apo>['\"])
-    (?P<value>.*)
-    (?P=apo)
-    $
-    """, re.X)
+#__config_regexp__  = re.compile( r"(?P<exp>export\s*)?(?P<var>[a-zA-Z0-9\-_+.${}]+)\s*(?P<colon>:)?(?P<ques>\?)?=\s*(?P<apo>['\"]?)(?P<value>.*)(?P=apo)$")
+__config_regexp__  = re.compile( r"(?P<exp>export\s*)?(?P<var>[a-zA-Z0-9\-_+.${}/]+)(\[(?P<flag>[a-zA-Z0-9\-_+.]+)\])?\s*((?P<colon>:=)|(?P<lazyques>\?\?=)|(?P<ques>\?=)|(?P<append>\+=)|(?P<prepend>=\+)|(?P<predot>=\.)|(?P<postdot>\.=)|=)\s*(?P<apo>['\"]?)(?P<value>.*)(?P=apo)$")
 __include_regexp__ = re.compile( r"include\s+(.+)" )
 __require_regexp__ = re.compile( r"require\s+(.+)" )
-__export_regexp__ = re.compile( r"export\s+([a-zA-Z0-9\-_+.${}/]+)$" )
+__export_regexp__ = re.compile( r"export\s+(.+)" )
 
 def init(data):
-    topdir = data.getVar('TOPDIR')
+    topdir = bb.data.getVar('TOPDIR', data)
     if not topdir:
-        data.setVar('TOPDIR', os.getcwd())
+        bb.data.setVar('TOPDIR', os.getcwd(), data)
 
 
 def supports(fn, d):
     return fn[-5:] == ".conf"
 
-def include(oldfn, fn, lineno, data, error_out):
+def include(oldfn, fn, data, error_out):
     """
-    error_out: A string indicating the verb (e.g. "include", "inherit") to be
-    used in a ParseError that will be raised if the file to be included could
-    not be included. Specify False to avoid raising an error in this case.
+    error_out If True a ParseError will be raised if the to be included
+    config-files could not be included.
     """
     if oldfn == fn: # prevent infinite recursion
         return None
 
     import bb
-    fn = data.expand(fn)
-    oldfn = data.expand(oldfn)
+    fn = bb.data.expand(fn, data)
+    oldfn = bb.data.expand(oldfn, data)
 
     if not os.path.isabs(fn):
         dname = os.path.dirname(oldfn)
-        bbpath = "%s:%s" % (dname, data.getVar("BBPATH", True))
+        bbpath = "%s:%s" % (dname, bb.data.getVar("BBPATH", data, 1))
         abs_fn = bb.utils.which(bbpath, fn)
         if abs_fn:
             fn = abs_fn
@@ -91,24 +68,16 @@ def include(oldfn, fn, lineno, data, error_out):
         ret = handle(fn, data, True)
     except IOError:
         if error_out:
-            raise ParseError("Could not %(error_out)s file %(fn)s" % vars(), oldfn, lineno)
+            raise ParseError("Could not %(error_out)s file %(fn)s" % vars() )
         logger.debug(2, "CONF file '%s' not found", fn)
 
-# We have an issue where a UI might want to enforce particular settings such as
-# an empty DISTRO variable. If configuration files do something like assigning
-# a weak default, it turns out to be very difficult to filter out these changes,
-# particularly when the weak default might appear half way though parsing a chain 
-# of configuration files. We therefore let the UIs hook into configuration file
-# parsing. This turns out to be a hard problem to solve any other way.
-confFilters = []
-
 def handle(fn, data, include):
     init(data)
 
     if include == 0:
         oldfile = None
     else:
-        oldfile = data.getVar('FILE')
+        oldfile = bb.data.getVar('FILE', data)
 
     abs_fn = resolve_file(fn, data)
     f = open(abs_fn, 'r')
@@ -121,32 +90,22 @@ def handle(fn, data, include):
     while True:
         lineno = lineno + 1
         s = f.readline()
-        if not s:
-            break
+        if not s: break
         w = s.strip()
-        # skip empty lines
-        if not w:
-            continue
+        if not w: continue          # skip empty lines
         s = s.rstrip()
+        if s[0] == '#': continue    # skip comments
         while s[-1] == '\\':
             s2 = f.readline().strip()
             lineno = lineno + 1
-            if (not s2 or s2 and s2[0] != "#") and s[0] == "#" :
-                bb.fatal("There is a confusing multiline, partially commented expression on line %s of file %s (%s).\nPlease clarify whether this is all a comment or should be parsed." % (lineno, fn, s))
             s = s[:-1] + s2
-        # skip comments
-        if s[0] == '#':
-            continue
         feeder(lineno, s, fn, statements)
 
     # DONE WITH PARSING... time to evaluate
-    data.setVar('FILE', abs_fn)
+    bb.data.setVar('FILE', fn, data)
     statements.eval(data)
     if oldfile:
-        data.setVar('FILE', oldfile)
-
-    for f in confFilters:
-        f(fn, data)
+        bb.data.setVar('FILE', oldfile, data)
 
     return data
 
@@ -172,7 +131,7 @@ def feeder(lineno, s, fn, statements):
         ast.handleExport(statements, fn, lineno, m)
         return
 
-    raise ParseError("unparsed line: '%s'" % s, fn, lineno);
+    raise ParseError("%s:%d: unparsed line: '%s'" % (fn, lineno, s));
 
 # Add us to the handlers list
 from bb.parse import handlers

bitbake/lib/bb/persist_data.py

@@ -41,19 +41,15 @@ if sqlversion[0] < 3 or (sqlversion[0] == 3 and sqlversion[1] < 3):
 
 logger = logging.getLogger("BitBake.PersistData")
 if hasattr(sqlite3, 'enable_shared_cache'):
-    try:
-        sqlite3.enable_shared_cache(True)
-    except sqlite3.OperationalError:
-        pass
+    sqlite3.enable_shared_cache(True)
 
 
 @total_ordering
 class SQLTable(collections.MutableMapping):
     """Object representing a table/domain in the database"""
-    def __init__(self, cachefile, table):
-        self.cachefile = cachefile
+    def __init__(self, cursor, table):
+        self.cursor = cursor
         self.table = table
-        self.cursor = connect(self.cachefile)
 
         self._execute("CREATE TABLE IF NOT EXISTS %s(key TEXT, value TEXT);"
                       % table)
@@ -67,8 +63,6 @@ class SQLTable(collections.MutableMapping):
             except sqlite3.OperationalError as exc:
                 if 'database is locked' in str(exc) and count < 500:
                     count = count + 1
-                    self.cursor.close()
-                    self.cursor = connect(self.cachefile)
                     continue
                 raise
 
@@ -125,11 +119,6 @@ class SQLTable(collections.MutableMapping):
 
         return len(self) < len(other)
 
-    def get_by_pattern(self, pattern):
-        data = self._execute("SELECT * FROM %s WHERE key LIKE ?;" %
-                             self.table, [pattern])
-        return [row[1] for row in data]
-
     def values(self):
         return list(self.itervalues())
 
@@ -199,17 +188,18 @@ class PersistData(object):
         del self.data[domain][key]
 
 def connect(database):
-    return sqlite3.connect(database, timeout=5, isolation_level=None)
+    return sqlite3.connect(database, timeout=30, isolation_level=None)
 
 def persist(domain, d):
     """Convenience factory for SQLTable objects based upon metadata"""
-    import bb.utils
-    cachedir = (d.getVar("PERSISTENT_DIR", True) or
-                d.getVar("CACHE", True))
+    import bb.data, bb.utils
+    cachedir = (bb.data.getVar("PERSISTENT_DIR", d, True) or
+                bb.data.getVar("CACHE", d, True))
     if not cachedir:
         logger.critical("Please set the 'PERSISTENT_DIR' or 'CACHE' variable")
         sys.exit(1)
 
     bb.utils.mkdirhier(cachedir)
     cachefile = os.path.join(cachedir, "bb_persist_data.sqlite3")
-    return SQLTable(cachefile, domain)
+    connection = connect(cachefile)
+    return SQLTable(connection, domain)

bitbake/lib/bb/process.py

@@ -1,8 +1,6 @@
 import logging
 import signal
 import subprocess
-import errno
-import select
 
 logger = logging.getLogger('BitBake.Process')
 
@@ -70,38 +68,20 @@ def _logged_communicate(pipe, log, input):
             pipe.stdin.write(input)
         pipe.stdin.close()
 
+    bufsize = 512
     outdata, errdata = [], []
-    rin = []
+    while pipe.poll() is None:
+        if pipe.stdout is not None:
+            data = pipe.stdout.read(bufsize)
+            if data is not None:
+                outdata.append(data)
+                log.write(data)
 
-    if pipe.stdout is not None:
-        bb.utils.nonblockingfd(pipe.stdout.fileno())
-        rin.append(pipe.stdout)
-    if pipe.stderr is not None:
-        bb.utils.nonblockingfd(pipe.stderr.fileno())
-        rin.append(pipe.stderr)
-
-    try:
-        while pipe.poll() is None:
-            rlist = rin
-            try:
-                r,w,e = select.select (rlist, [], [])
-            except OSError, e:
-                if e.errno != errno.EINTR:
-                    raise
-
-            if pipe.stdout in r:
-                data = pipe.stdout.read()
-                if data is not None:
-                    outdata.append(data)
-                    log.write(data)
-
-            if pipe.stderr in r:
-                data = pipe.stderr.read()
-                if data is not None:
-                    errdata.append(data)
-                    log.write(data)
-    finally:    
-        log.flush()
+        if pipe.stderr is not None:
+            data = pipe.stderr.read(bufsize)
+            if data is not None:
+                errdata.append(data)
+                log.write(data)
     return ''.join(outdata), ''.join(errdata)
 
 def run(cmd, input=None, log=None, **options):

bitbake/lib/bb/providers.py

@@ -24,54 +24,16 @@
 import re
 import logging
 from bb import data, utils
-from collections import defaultdict
 import bb
 
 logger = logging.getLogger("BitBake.Provider")
 
-class NoProvider(bb.BBHandledException):
+class NoProvider(Exception):
     """Exception raised when no provider of a build dependency can be found"""
 
-class NoRProvider(bb.BBHandledException):
+class NoRProvider(Exception):
     """Exception raised when no provider of a runtime dependency can be found"""
 
-class MultipleRProvider(bb.BBHandledException):
-    """Exception raised when multiple providers of a runtime dependency can be found"""
-
-def findProviders(cfgData, dataCache, pkg_pn = None):
-    """
-    Convenience function to get latest and preferred providers in pkg_pn
-    """
-
-    if not pkg_pn:
-        pkg_pn = dataCache.pkg_pn
-
-    # Need to ensure data store is expanded
-    localdata = data.createCopy(cfgData)
-    bb.data.update_data(localdata)
-    bb.data.expandKeys(localdata)
-
-    preferred_versions = {}
-    latest_versions = {}
-
-    for pn in pkg_pn:
-        (last_ver, last_file, pref_ver, pref_file) = findBestProvider(pn, localdata, dataCache, pkg_pn)
-        preferred_versions[pn] = (pref_ver, pref_file)
-        latest_versions[pn] = (last_ver, last_file)
-
-    return (latest_versions, preferred_versions)
-
-
-def allProviders(dataCache):
-    """
-    Find all providers for each pn
-    """
-    all_providers = defaultdict(list)
-    for (fn, pn) in dataCache.pkg_fn.items():
-        ver = dataCache.pkg_pepvpr[fn]
-        all_providers[pn].append((ver, fn))
-    return all_providers
-
 
 def sortPriorities(pn, dataCache, pkg_pn = None):
     """
@@ -122,15 +84,15 @@ def findPreferredProvider(pn, cfgData, dataCache, pkg_pn = None, item = None):
     preferred_ver = None
 
     localdata = data.createCopy(cfgData)
-    localdata.setVar('OVERRIDES', "%s:pn-%s:%s" % (data.getVar('OVERRIDES', localdata), pn, pn))
+    bb.data.setVar('OVERRIDES', "%s:pn-%s:%s" % (data.getVar('OVERRIDES', localdata), pn, pn), localdata)
     bb.data.update_data(localdata)
 
-    preferred_v = localdata.getVar('PREFERRED_VERSION', True)
+    preferred_v = bb.data.getVar('PREFERRED_VERSION', localdata, True)
     if preferred_v:
         m = re.match('(\d+:)*(.*)(_.*)*', preferred_v)
         if m:
             if m.group(1):
-                preferred_e = m.group(1)[:-1]
+                preferred_e = int(m.group(1)[:-1])
             else:
                 preferred_e = None
             preferred_v = m.group(2)
@@ -286,7 +248,7 @@ def filterProviders(providers, item, cfgData, dataCache):
 
     eligible = _filterProviders(providers, item, cfgData, dataCache)
 
-    prefervar = cfgData.getVar('PREFERRED_PROVIDER_%s' % item, True)
+    prefervar = bb.data.getVar('PREFERRED_PROVIDER_%s' % item, cfgData, 1)
     if prefervar:
         dataCache.preferred[item] = prefervar
 
@@ -324,8 +286,8 @@ def filterProvidersRunTime(providers, item, cfgData, dataCache):
         pn = dataCache.pkg_fn[p]
         provides = dataCache.pn_provides[pn]
         for provide in provides:
-            prefervar = cfgData.getVar('PREFERRED_PROVIDER_%s' % provide, True)
-            logger.debug(1, "checking PREFERRED_PROVIDER_%s (value %s) against %s", provide, prefervar, pns.keys())
+            prefervar = bb.data.getVar('PREFERRED_PROVIDER_%s' % provide, cfgData, 1)
+            logger.verbose("checking PREFERRED_PROVIDER_%s (value %s) against %s", provide, prefervar, pns.keys())
             if prefervar in pns and pns[prefervar] not in preferred:
                 var = "PREFERRED_PROVIDER_%s = %s" % (provide, prefervar)
                 logger.verbose("selecting %s to satisfy runtime %s due to %s", prefervar, item, var)

bitbake/lib/bb/server/none.py

@@ -191,8 +191,8 @@ class BitBakeServer(object):
     def saveConnectionDetails(self):
         return
 
-    def detach(self):
-        return
+    def detach(self, cooker_logfile):
+        self.logfile = cooker_logfile
 
     def establishConnection(self):
         self.connection = BitBakeServerConnection(self)

bitbake/lib/bb/server/process.py

@@ -45,10 +45,10 @@ class ServerCommunicator():
         while True:
             # don't let the user ctrl-c while we're waiting for a response
             try:
-                if self.connection.poll(20):
+                if self.connection.poll(.5):
                     return self.connection.recv()
                 else:
-                    bb.fatal("Timeout while attempting to communicate with bitbake server")
+                    return None
             except KeyboardInterrupt:
                 pass
 
@@ -256,7 +256,7 @@ class BitBakeServer(object):
     def saveConnectionDetails(self):
         return
 
-    def detach(self):
+    def detach(self, cooker_logfile):
         self.server.start() 
         return
 
@@ -266,5 +266,5 @@ class BitBakeServer(object):
         return self.connection
 
     def launchUI(self, uifunc, *args):
-        return uifunc(*args)
+        return bb.cooker.server_main(self.cooker, uifunc, *args)
 

bitbake/lib/bb/server/xmlrpc.py

@@ -163,7 +163,7 @@ class BitBakeXMLRPCServer(SimpleXMLRPCServer):
     # remove this when you're done with debugging
     # allow_reuse_address = True
 
-    def __init__(self, interface):
+    def __init__(self, interface = ("localhost", 0)):
         """
         Constructor
         """
@@ -242,14 +242,14 @@ class BitBakeXMLRPCServer(SimpleXMLRPCServer):
         return
 
 class BitbakeServerInfo():
-    def __init__(self, host, port):
-        self.host = host
-        self.port = port
+    def __init__(self, server):
+        self.host = server.host
+        self.port = server.port
 
 class BitBakeServerConnection():
-    def __init__(self, serverinfo, clientinfo=("localhost", 0)):
+    def __init__(self, serverinfo):
         self.connection = _create_server(serverinfo.host, serverinfo.port)
-        self.events = uievent.BBUIEventQueue(self.connection, clientinfo)
+        self.events = uievent.BBUIEventQueue(self.connection)
         for event in bb.event.ui_queue:
             self.events.queue_event(event)
 
@@ -267,8 +267,8 @@ class BitBakeServerConnection():
             pass
 
 class BitBakeServer(object):
-    def initServer(self, interface = ("localhost", 0)):
-        self.server = BitBakeXMLRPCServer(interface)
+    def initServer(self):
+        self.server = BitBakeXMLRPCServer()
 
     def addcooker(self, cooker):
         self.cooker = cooker
@@ -278,10 +278,10 @@ class BitBakeServer(object):
         return self.server.register_idle_function
 
     def saveConnectionDetails(self): 
-        self.serverinfo = BitbakeServerInfo(self.server.host, self.server.port)
+        self.serverinfo = BitbakeServerInfo(self.server)
 
-    def detach(self):
-        daemonize.createDaemon(self.server.serve_forever, "bitbake-cookerdaemon.log")
+    def detach(self, cooker_logfile):
+        daemonize.createDaemon(self.server.serve_forever, cooker_logfile)
         del self.cooker
         del self.server
 

bitbake/lib/bb/siggen.py

@@ -2,7 +2,6 @@ import hashlib
 import logging
 import os
 import re
-import tempfile
 import bb.data
 
 logger = logging.getLogger('BitBake.SigGen')
@@ -17,7 +16,7 @@ def init(d):
     siggens = [obj for obj in globals().itervalues()
                       if type(obj) is type and issubclass(obj, SignatureGenerator)]
 
-    desired = d.getVar("BB_SIGNATURE_HANDLER", True) or "noop"
+    desired = bb.data.getVar("BB_SIGNATURE_HANDLER", d, True) or "noop"
     for sg in siggens:
         if desired == sg.name:
             return sg(d)
@@ -40,7 +39,7 @@ class SignatureGenerator(object):
         return
 
     def get_taskhash(self, fn, task, deps, dataCache):
-        return "0"
+        return 0
 
     def set_taskdata(self, hashes, deps):
         return
@@ -48,16 +47,9 @@ class SignatureGenerator(object):
     def stampfile(self, stampbase, file_name, taskname, extrainfo):
         return ("%s.%s.%s" % (stampbase, taskname, extrainfo)).rstrip('.')
 
-    def stampcleanmask(self, stampbase, file_name, taskname, extrainfo):
-        return ("%s.%s.%s" % (stampbase, taskname, extrainfo)).rstrip('.')
-
     def dump_sigtask(self, fn, task, stampbase, runtime):
         return
 
-    def invalidate_task(self, task, d, fn):
-        bb.build.del_stamp(task, d, fn)
-
-
 class SignatureGeneratorBasic(SignatureGenerator):
     """
     """
@@ -68,16 +60,11 @@ class SignatureGeneratorBasic(SignatureGenerator):
         self.taskhash = {}
         self.taskdeps = {}
         self.runtaskdeps = {}
-        self.file_checksum_values = {}
         self.gendeps = {}
         self.lookupcache = {}
-        self.pkgnameextract = re.compile("(?P<fn>.*)\..*")
         self.basewhitelist = set((data.getVar("BB_HASHBASE_WHITELIST", True) or "").split())
-        self.taskwhitelist = None
-        self.init_rundepcheck(data)
-
-    def init_rundepcheck(self, data):
         self.taskwhitelist = data.getVar("BB_HASHTASK_WHITELIST", True) or None
+
         if self.taskwhitelist:
             self.twl = re.compile(self.taskwhitelist)
         else:
@@ -85,10 +72,11 @@ class SignatureGeneratorBasic(SignatureGenerator):
 
     def _build_data(self, fn, d):
 
-        tasklist, gendeps, lookupcache = bb.data.generate_dependencies(d)
+        tasklist, gendeps = bb.data.generate_dependencies(d)
 
         taskdeps = {}
         basehash = {}
+        lookupcache = {}
 
         for task in tasklist:
             data = d.getVar(task, False)
@@ -98,7 +86,6 @@ class SignatureGeneratorBasic(SignatureGenerator):
                 bb.error("Task %s from %s seems to be empty?!" % (task, fn))
                 data = ''
 
-            gendeps[task] -= self.basewhitelist
             newdeps = gendeps[task]
             seen = set()
             while newdeps:
@@ -108,26 +95,21 @@ class SignatureGeneratorBasic(SignatureGenerator):
                 for dep in nextdeps:
                     if dep in self.basewhitelist:
                         continue
-                    gendeps[dep] -= self.basewhitelist
                     newdeps |= gendeps[dep]
                 newdeps -= seen
 
-            alldeps = sorted(seen)
-            for dep in alldeps:
-                data = data + dep
+            alldeps = seen - self.basewhitelist
+
+            for dep in sorted(alldeps):
                 if dep in lookupcache:
                     var = lookupcache[dep]
-                elif dep[-1] == ']':
-                    vf = dep[:-1].split('[')
-                    var = d.getVarFlag(vf[0], vf[1], False)
-                    lookupcache[dep] = var
                 else:
                     var = d.getVar(dep, False)
                     lookupcache[dep] = var
                 if var:
                     data = data + str(var)
             self.basehash[fn + "." + task] = hashlib.md5(data).hexdigest()
-            taskdeps[task] = alldeps
+            taskdeps[task] = sorted(alldeps)
 
         self.taskdeps[fn] = taskdeps
         self.gendeps[fn] = gendeps
@@ -140,11 +122,7 @@ class SignatureGeneratorBasic(SignatureGenerator):
         if variant:
             fn = "virtual:" + variant + ":" + fn
 
-        try:
-            taskdeps = self._build_data(fn, d)
-        except:
-            bb.note("Error during finalise of %s" % fn)
-            raise
+        taskdeps = self._build_data(fn, d)
 
         #Slow but can be useful for debugging mismatched basehashes
         #for task in self.taskdeps[fn]:
@@ -153,49 +131,21 @@ class SignatureGeneratorBasic(SignatureGenerator):
         for task in taskdeps:
             d.setVar("BB_BASEHASH_task-%s" % task, self.basehash[fn + "." + task])
 
-    def rundep_check(self, fn, recipename, task, dep, depname, dataCache):
-        # Return True if we should keep the dependency, False to drop it
-        # We only manipulate the dependencies for packages not in the whitelist
-        if self.twl and not self.twl.search(recipename):
-            # then process the actual dependencies
-            if self.twl.search(depname):
-                return False
-        return True
-
-    def read_taint(self, fn, task, stampbase):
-        taint = None
-        try:
-            with open(stampbase + '.' + task + '.taint', 'r') as taintf:
-                taint = taintf.read()
-        except IOError:
-            pass
-        return taint
-
     def get_taskhash(self, fn, task, deps, dataCache):
         k = fn + "." + task
         data = dataCache.basetaskhash[k]
         self.runtaskdeps[k] = []
-        self.file_checksum_values[k] = {}
-        recipename = dataCache.pkg_fn[fn]
-        for dep in sorted(deps, key=clean_basepath):
-            depname = dataCache.pkg_fn[self.pkgnameextract.search(dep).group('fn')]
-            if not self.rundep_check(fn, recipename, task, dep, depname, dataCache):
-                continue
+        for dep in sorted(deps):
+            # We only manipulate the dependencies for packages not in the whitelist
+            if self.twl and not self.twl.search(dataCache.pkg_fn[fn]):
+                # then process the actual dependencies
+                dep_fn = re.search("(?P<fn>.*)\..*", dep).group('fn')
+                if self.twl.search(dataCache.pkg_fn[dep_fn]):
+                    continue
             if dep not in self.taskhash:
                 bb.fatal("%s is not in taskhash, caller isn't calling in dependency order?", dep)
             data = data + self.taskhash[dep]
             self.runtaskdeps[k].append(dep)
-
-        if task in dataCache.file_checksums[fn]:
-            checksums = bb.fetch2.get_file_checksums(dataCache.file_checksums[fn][task], recipename)
-            for (f,cs) in checksums:
-                self.file_checksum_values[k][f] = cs
-                data = data + cs
-
-        taint = self.read_taint(fn, task, dataCache.stamp[fn])
-        if taint:
-            data = data + taint
-
         h = hashlib.md5(data).hexdigest()
         self.taskhash[k] = h
         #d.setVar("BB_TASKHASH_task-%s" % task, taskhash[task])
@@ -209,7 +159,7 @@ class SignatureGeneratorBasic(SignatureGenerator):
         k = fn + "." + task
         if runtime == "customfile":
             sigfile = stampbase
-        elif runtime and k in self.taskhash:
+        elif runtime:
             sigfile = stampbase + "." + task + ".sigdata" + "." + self.taskhash[k]
         else:
             sigfile = stampbase + "." + task + ".sigbasedata" + "." + self.basehash[k]
@@ -230,31 +180,14 @@ class SignatureGeneratorBasic(SignatureGenerator):
             data['gendeps'][dep] = self.gendeps[fn][dep]
             data['varvals'][dep] = self.lookupcache[fn][dep]
 
-        if runtime and k in self.taskhash:
+        if runtime:
             data['runtaskdeps'] = self.runtaskdeps[k]
-            data['file_checksum_values'] = self.file_checksum_values[k]
             data['runtaskhashes'] = {}
             for dep in data['runtaskdeps']:
                 data['runtaskhashes'][dep] = self.taskhash[dep]
 
-        taint = self.read_taint(fn, task, stampbase)
-        if taint:
-            data['taint'] = taint
-
-        fd, tmpfile = tempfile.mkstemp(dir=os.path.dirname(sigfile), prefix="sigtask.")
-        try:
-            with os.fdopen(fd, "wb") as stream:
-                p = pickle.dump(data, stream, -1)
-                stream.flush()
-                os.fsync(fd)
-            os.chmod(tmpfile, 0664)
-            os.rename(tmpfile, sigfile)
-        except (OSError, IOError), err:
-            try:
-                os.unlink(tmpfile)
-            except OSError:
-                pass
-            raise err
+        p = pickle.Pickler(file(sigfile, "wb"), -1)
+        p.dump(data)
 
     def dump_sigs(self, dataCache):
         for fn in self.taskdeps:
@@ -270,184 +203,102 @@ class SignatureGeneratorBasic(SignatureGenerator):
 class SignatureGeneratorBasicHash(SignatureGeneratorBasic):
     name = "basichash"
 
-    def stampfile(self, stampbase, fn, taskname, extrainfo, clean=False):
+    def stampfile(self, stampbase, fn, taskname, extrainfo):
         if taskname != "do_setscene" and taskname.endswith("_setscene"):
             k = fn + "." + taskname[:-9]
         else:
             k = fn + "." + taskname
-        if clean:
-            h = "*"
-        elif k in self.taskhash:
-            h = self.taskhash[k]
-        else:
-            # If k is not in basehash, then error
-            h = self.basehash[k]
+        h = self.taskhash[k]
         return ("%s.%s.%s.%s" % (stampbase, taskname, h, extrainfo)).rstrip('.')
 
-    def stampcleanmask(self, stampbase, fn, taskname, extrainfo):
-        return self.stampfile(stampbase, fn, taskname, extrainfo, clean=True)
-        
-    def invalidate_task(self, task, d, fn):
-        bb.note("Tainting hash to force rebuild of task %s, %s" % (fn, task))
-        bb.build.write_taint(task, d, fn)
-
 def dump_this_task(outfile, d):
     import bb.parse
     fn = d.getVar("BB_FILENAME", True)
     task = "do_" + d.getVar("BB_CURRENTTASK", True)
     bb.parse.siggen.dump_sigtask(fn, task, outfile, "customfile")
 
-def clean_basepath(a):
-    if a.startswith("virtual:"):
-        b = a.rsplit(":", 1)[0] + ":" + a.rsplit("/", 1)[1]
-    else:
-        b = a.rsplit("/", 1)[1]
-    return b
-
-def clean_basepaths(a):
-    b = {}
-    for x in a:
-        b[clean_basepath(x)] = a[x]
-    return b
-
-def compare_sigfiles(a, b, recursecb = None):
-    output = []
-
-    p1 = pickle.Unpickler(open(a, "rb"))
+def compare_sigfiles(a, b):
+    p1 = pickle.Unpickler(file(a, "rb"))
     a_data = p1.load()
-    p2 = pickle.Unpickler(open(b, "rb"))
+    p2 = pickle.Unpickler(file(b, "rb"))
     b_data = p2.load()
 
-    def dict_diff(a, b, whitelist=set()):
+    def dict_diff(a, b):
         sa = set(a.keys())
         sb = set(b.keys())
         common = sa & sb
         changed = set()
         for i in common:
-            if a[i] != b[i] and i not in whitelist:
+            if a[i] != b[i]:
                 changed.add(i)
         added = sa - sb
         removed = sb - sa
         return changed, added, removed
 
     if 'basewhitelist' in a_data and a_data['basewhitelist'] != b_data['basewhitelist']:
-        output.append("basewhitelist changed from '%s' to '%s'" % (a_data['basewhitelist'], b_data['basewhitelist']))
-        if a_data['basewhitelist'] and b_data['basewhitelist']:
-            output.append("changed items: %s" % a_data['basewhitelist'].symmetric_difference(b_data['basewhitelist']))
+        print "basewhitelist changed from %s to %s" % (a_data['basewhitelist'], b_data['basewhitelist'])
 
     if 'taskwhitelist' in a_data and a_data['taskwhitelist'] != b_data['taskwhitelist']:
-        output.append("taskwhitelist changed from '%s' to '%s'" % (a_data['taskwhitelist'], b_data['taskwhitelist']))
-        if a_data['taskwhitelist'] and b_data['taskwhitelist']:
-            output.append("changed items: %s" % a_data['taskwhitelist'].symmetric_difference(b_data['taskwhitelist']))
+        print "taskwhitelist changed from %s to %s" % (a_data['taskwhitelist'], b_data['taskwhitelist'])
 
     if a_data['taskdeps'] != b_data['taskdeps']:
-        output.append("Task dependencies changed from:\n%s\nto:\n%s" % (sorted(a_data['taskdeps']), sorted(b_data['taskdeps'])))
+        print "Task dependencies changed from %s to %s" % (sorted(a_data['taskdeps']), sorted(b_data['taskdeps']))
 
     if a_data['basehash'] != b_data['basehash']:
-        output.append("basehash changed from %s to %s" % (a_data['basehash'], b_data['basehash']))
+        print "basehash changed from %s to %s" % (a_data['basehash'], b_data['basehash'])
 
-    changed, added, removed = dict_diff(a_data['gendeps'], b_data['gendeps'], a_data['basewhitelist'] & b_data['basewhitelist'])
+    changed, added, removed = dict_diff(a_data['gendeps'], b_data['gendeps'])
     if changed:
         for dep in changed:
-            output.append("List of dependencies for variable %s changed from '%s' to '%s'" % (dep, a_data['gendeps'][dep], b_data['gendeps'][dep]))
-            if a_data['gendeps'][dep] and b_data['gendeps'][dep]:
-                output.append("changed items: %s" % a_data['gendeps'][dep].symmetric_difference(b_data['gendeps'][dep]))
+            print "List of dependencies for variable %s changed from %s to %s" % (dep, a_data['gendeps'][dep], b_data['gendeps'][dep])
     if added:
         for dep in added:
-            output.append("Dependency on variable %s was added" % (dep))
+            print "Dependency on variable %s was added" % (dep)
     if removed:
         for dep in removed:
-            output.append("Dependency on Variable %s was removed" % (dep))
+            print "Dependency on Variable %s was removed" % (dep)
 
 
     changed, added, removed = dict_diff(a_data['varvals'], b_data['varvals'])
     if changed:
         for dep in changed:
-            output.append("Variable %s value changed from '%s' to '%s'" % (dep, a_data['varvals'][dep], b_data['varvals'][dep]))
-
-    changed, added, removed = dict_diff(a_data['file_checksum_values'], b_data['file_checksum_values'])
-    if changed:
-        for f in changed:
-            output.append("Checksum for file %s changed from %s to %s" % (f, a_data['file_checksum_values'][f], b_data['file_checksum_values'][f]))
-    if added:
-        for f in added:
-            output.append("Dependency on checksum of file %s was added" % (f))
-    if removed:
-        for f in removed:
-            output.append("Dependency on checksum of file %s was removed" % (f))
-
+            print "Variable %s value changed from %s to %s" % (dep, a_data['varvals'][dep], b_data['varvals'][dep])
 
     if 'runtaskhashes' in a_data and 'runtaskhashes' in b_data:
-        a = a_data['runtaskhashes']
-        b = b_data['runtaskhashes']
-        changed, added, removed = dict_diff(a, b)
+        changed, added, removed = dict_diff(a_data['runtaskhashes'], b_data['runtaskhashes'])
         if added:
             for dep in added:
-                bdep_found = False
-                if removed:
-                    for bdep in removed:
-                        if a[dep] == b[bdep]:
-                            #output.append("Dependency on task %s was replaced by %s with same hash" % (dep, bdep))
-                            bdep_found = True
-                if not bdep_found:
-                    output.append("Dependency on task %s was added with hash %s" % (clean_basepath(dep), a[dep]))
+                print "Dependency on task %s was added" % (dep)
         if removed:
             for dep in removed:
-                adep_found = False
-                if added:
-                    for adep in added:
-                        if a[adep] == b[dep]:
-                            #output.append("Dependency on task %s was replaced by %s with same hash" % (adep, dep))
-                            adep_found = True
-                if not adep_found:
-                    output.append("Dependency on task %s was removed with hash %s" % (clean_basepath(dep), b[dep]))
+                print "Dependency on task %s was removed" % (dep)
         if changed:
             for dep in changed:
-                output.append("Hash for dependent task %s changed from %s to %s" % (clean_basepath(dep), a[dep], b[dep]))
-                if callable(recursecb):
-                    recout = recursecb(dep, a[dep], b[dep])
-                    if recout:
-                        output.extend(recout)
-
-    a_taint = a_data.get('taint', None)
-    b_taint = b_data.get('taint', None)
-    if a_taint != b_taint:
-        output.append("Taint (by forced/invalidated task) changed from %s to %s" % (a_taint, b_taint))
-
-    return output
-
+                print "Hash for dependent task %s changed from %s to %s" % (dep, a_data['runtaskhashes'][dep], b_data['runtaskhashes'][dep])
+    elif 'runtaskdeps' in a_data and 'runtaskdeps' in b_data and sorted(a_data['runtaskdeps']) != sorted(b_data['runtaskdeps']):
+        print "Tasks this task depends on changed from %s to %s" % (sorted(a_data['runtaskdeps']), sorted(b_data['runtaskdeps']))
 
 def dump_sigfile(a):
-    output = []
-
-    p1 = pickle.Unpickler(open(a, "rb"))
+    p1 = pickle.Unpickler(file(a, "rb"))
     a_data = p1.load()
 
-    output.append("basewhitelist: %s" % (a_data['basewhitelist']))
+    print "basewhitelist: %s" % (a_data['basewhitelist'])
 
-    output.append("taskwhitelist: %s" % (a_data['taskwhitelist']))
+    print "taskwhitelist: %s" % (a_data['taskwhitelist'])
 
-    output.append("Task dependencies: %s" % (sorted(a_data['taskdeps'])))
+    print "Task dependencies: %s" % (sorted(a_data['taskdeps']))
 
-    output.append("basehash: %s" % (a_data['basehash']))
+    print "basehash: %s" % (a_data['basehash'])
 
     for dep in a_data['gendeps']:
-        output.append("List of dependencies for variable %s is %s" % (dep, a_data['gendeps'][dep]))
+        print "List of dependencies for variable %s is %s" % (dep, a_data['gendeps'][dep])
 
     for dep in a_data['varvals']:
-        output.append("Variable %s value is %s" % (dep, a_data['varvals'][dep]))
+        print "Variable %s value is %s" % (dep, a_data['varvals'][dep])
 
     if 'runtaskdeps' in a_data:
-        output.append("Tasks this task depends on: %s" % (a_data['runtaskdeps']))
-
-    if 'file_checksum_values' in a_data:
-        output.append("This task depends on the checksums of files: %s" % (a_data['file_checksum_values']))
+        print "Tasks this task depends on: %s" % (a_data['runtaskdeps'])
 
     if 'runtaskhashes' in a_data:
         for dep in a_data['runtaskhashes']:
-            output.append("Hash for dependent task %s is %s" % (dep, a_data['runtaskhashes'][dep]))
-
-    if 'taint' in a_data:
-        output.append("Tainted (by forced/invalidated task): %s" % a_data['taint'])
-
-    return output
+            print "Hash for dependent task %s is %s" % (dep, a_data['runtaskhashes'][dep])

bitbake/lib/bb/taskdata.py

@@ -55,7 +55,6 @@ class TaskData:
         self.tasks_name = []
         self.tasks_tdepends = []
         self.tasks_idepends = []
-        self.tasks_irdepends = []
         # Cache to speed up task ID lookups
         self.tasks_lookup = {}
 
@@ -116,16 +115,6 @@ class TaskData:
                 ids.append(self.tasks_lookup[fnid][task])
         return ids
 
-    def gettask_id_fromfnid(self, fnid, task):
-        """
-        Return an ID number for the task matching fnid and task.
-        """
-        if fnid in self.tasks_lookup:
-            if task in self.tasks_lookup[fnid]:
-                return self.tasks_lookup[fnid][task]
-
-        return None
-
     def gettask_id(self, fn, task, create = True):
         """
         Return an ID number for the task matching fn and task.
@@ -145,7 +134,6 @@ class TaskData:
         self.tasks_fnid.append(fnid)
         self.tasks_tdepends.append([])
         self.tasks_idepends.append([])
-        self.tasks_irdepends.append([])
 
         listid = len(self.tasks_name) - 1
 
@@ -165,7 +153,7 @@ class TaskData:
         fnid = self.getfn_id(fn)
 
         if fnid in self.failed_fnids:
-            bb.msg.fatal("TaskData", "Trying to re-add a failed file? Something is broken...")
+            bb.msg.fatal(bb.msg.domain.TaskData, "Trying to re-add a failed file? Something is broken...")
 
         # Check if we've already seen this fn
         if fnid in self.tasks_fnid:
@@ -176,9 +164,6 @@ class TaskData:
             # Work out task dependencies
             parentids = []
             for dep in task_deps['parents'][task]:
-                if dep not in task_deps['tasks']:
-                    bb.debug(2, "Not adding dependeny of %s on %s since %s does not exist" % (task, dep, dep))
-                    continue
                 parentid = self.gettask_id(fn, dep)
                 parentids.append(parentid)
             taskid = self.gettask_id(fn, task)
@@ -190,18 +175,9 @@ class TaskData:
                 for dep in task_deps['depends'][task].split():
                     if dep:
                         if ":" not in dep:
-                            bb.msg.fatal("TaskData", "Error for %s, dependency %s does not contain ':' character\n. Task 'depends' should be specified in the form 'packagename:task'" % (fn, dep))
+                            bb.msg.fatal(bb.msg.domain.TaskData, "Error, dependency %s does not contain ':' character\n. Task 'depends' should be specified in the form 'packagename:task'" % (dep, fn))
                         ids.append(((self.getbuild_id(dep.split(":")[0])), dep.split(":")[1]))
                 self.tasks_idepends[taskid].extend(ids)
-            if 'rdepends' in task_deps and task in task_deps['rdepends']:
-                ids = []
-                for dep in task_deps['rdepends'][task].split():
-                    if dep:
-                        if ":" not in dep:
-                            bb.msg.fatal("TaskData", "Error for %s, dependency %s does not contain ':' character\n. Task 'rdepends' should be specified in the form 'packagename:task'" % (fn, dep))
-                        ids.append(((self.getrun_id(dep.split(":")[0])), dep.split(":")[1]))
-                self.tasks_irdepends[taskid].extend(ids)
-
 
         # Work out build dependencies
         if not fnid in self.depids:
@@ -485,7 +461,6 @@ class TaskData:
                     providers_list.append(dataCache.pkg_fn[fn])
                 bb.event.fire(bb.event.MultipleProviders(item, providers_list, runtime=True), cfgData)
             self.consider_msgs_cache.append(item)
-            raise bb.providers.MultipleRProvider(item)
 
         # run through the list until we find one that we can build
         for fn in eligible:
@@ -558,11 +533,6 @@ class TaskData:
         dependees = self.get_rdependees(targetid)
         for fnid in dependees:
             self.fail_fnid(fnid, missing_list)
-        for taskid in xrange(len(self.tasks_irdepends)):
-            irdepends = self.tasks_irdepends[taskid]
-            for (idependid, idependtask) in irdepends:
-                if idependid == targetid:
-                    self.fail_fnid(self.tasks_fnid[taskid], missing_list)
 
     def add_unresolved(self, cfgData, dataCache):
         """
@@ -584,7 +554,7 @@ class TaskData:
                 try:
                     self.add_rprovider(cfgData, dataCache, target)
                     added = added + 1
-                except (bb.providers.NoRProvider, bb.providers.MultipleRProvider):
+                except bb.providers.NoRProvider:
                     self.remove_runtarget(self.getrun_id(target))
             logger.debug(1, "Resolved " + str(added) + " extra dependencies")
             if added == 0:

bitbake/lib/bb/tests/codeparser.py

@@ -1,374 +0,0 @@
-# ex:ts=4:sw=4:sts=4:et
-# -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*-
-#
-# BitBake Test for codeparser.py
-#
-# Copyright (C) 2010 Chris Larson
-# Copyright (C) 2012 Richard Purdie
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-
-import unittest
-import logging
-import bb
-
-logger = logging.getLogger('BitBake.TestCodeParser')
-
-# bb.data references bb.parse but can't directly import due to circular dependencies.
-# Hack around it for now :( 
-import bb.parse
-import bb.data
-
-class ReferenceTest(unittest.TestCase):
-    def setUp(self):
-        self.d = bb.data.init()
-
-    def setEmptyVars(self, varlist):
-        for k in varlist:
-            self.d.setVar(k, "")
-
-    def setValues(self, values):
-        for k, v in values.items():
-            self.d.setVar(k, v)
-
-    def assertReferences(self, refs):
-        self.assertEqual(self.references, refs)
-
-    def assertExecs(self, execs):
-        self.assertEqual(self.execs, execs)
-
-class VariableReferenceTest(ReferenceTest):
-
-    def parseExpression(self, exp):
-        parsedvar = self.d.expandWithRefs(exp, None)
-        self.references = parsedvar.references
-
-    def test_simple_reference(self):
-        self.setEmptyVars(["FOO"])
-        self.parseExpression("${FOO}")
-        self.assertReferences(set(["FOO"]))
-
-    def test_nested_reference(self):
-        self.setEmptyVars(["BAR"])
-        self.d.setVar("FOO", "BAR")
-        self.parseExpression("${${FOO}}")
-        self.assertReferences(set(["FOO", "BAR"]))
-
-    def test_python_reference(self):
-        self.setEmptyVars(["BAR"])
-        self.parseExpression("${@bb.data.getVar('BAR', d, True) + 'foo'}")
-        self.assertReferences(set(["BAR"]))
-
-class ShellReferenceTest(ReferenceTest):
-
-    def parseExpression(self, exp):
-        parsedvar = self.d.expandWithRefs(exp, None)
-        parser = bb.codeparser.ShellParser("ParserTest", logger)
-        parser.parse_shell(parsedvar.value)
-
-        self.references = parsedvar.references
-        self.execs = parser.execs
-
-    def test_quotes_inside_assign(self):
-        self.parseExpression('foo=foo"bar"baz')
-        self.assertReferences(set([]))
-
-    def test_quotes_inside_arg(self):
-        self.parseExpression('sed s#"bar baz"#"alpha beta"#g')
-        self.assertExecs(set(["sed"]))
-
-    def test_arg_continuation(self):
-        self.parseExpression("sed -i -e s,foo,bar,g \\\n *.pc")
-        self.assertExecs(set(["sed"]))
-
-    def test_dollar_in_quoted(self):
-        self.parseExpression('sed -i -e "foo$" *.pc')
-        self.assertExecs(set(["sed"]))
-
-    def test_quotes_inside_arg_continuation(self):
-        self.setEmptyVars(["bindir", "D", "libdir"])
-        self.parseExpression("""
-sed -i -e s#"moc_location=.*$"#"moc_location=${bindir}/moc4"# \\
--e s#"uic_location=.*$"#"uic_location=${bindir}/uic4"# \\
-${D}${libdir}/pkgconfig/*.pc
-""")
-        self.assertReferences(set(["bindir", "D", "libdir"]))
-
-    def test_assign_subshell_expansion(self):
-        self.parseExpression("foo=$(echo bar)")
-        self.assertExecs(set(["echo"]))
-
-    def test_shell_unexpanded(self):
-        self.setEmptyVars(["QT_BASE_NAME"])
-        self.parseExpression('echo "${QT_BASE_NAME}"')
-        self.assertExecs(set(["echo"]))
-        self.assertReferences(set(["QT_BASE_NAME"]))
-
-    def test_incomplete_varexp_single_quotes(self):
-        self.parseExpression("sed -i -e 's:IP{:I${:g' $pc")
-        self.assertExecs(set(["sed"]))
-
-
-    def test_until(self):
-        self.parseExpression("until false; do echo true; done")
-        self.assertExecs(set(["false", "echo"]))
-        self.assertReferences(set())
-
-    def test_case(self):
-        self.parseExpression("""
-case $foo in
-*)
-bar
-;;
-esac
-""")
-        self.assertExecs(set(["bar"]))
-        self.assertReferences(set())
-
-    def test_assign_exec(self):
-        self.parseExpression("a=b c='foo bar' alpha 1 2 3")
-        self.assertExecs(set(["alpha"]))
-
-    def test_redirect_to_file(self):
-        self.setEmptyVars(["foo"])
-        self.parseExpression("echo foo >${foo}/bar")
-        self.assertExecs(set(["echo"]))
-        self.assertReferences(set(["foo"]))
-
-    def test_heredoc(self):
-        self.setEmptyVars(["theta"])
-        self.parseExpression("""
-cat <<END
-alpha
-beta
-${theta}
-END
-""")
-        self.assertReferences(set(["theta"]))
-
-    def test_redirect_from_heredoc(self):
-        v = ["B", "SHADOW_MAILDIR", "SHADOW_MAILFILE", "SHADOW_UTMPDIR", "SHADOW_LOGDIR", "bindir"]
-        self.setEmptyVars(v)
-        self.parseExpression("""
-cat <<END >${B}/cachedpaths
-shadow_cv_maildir=${SHADOW_MAILDIR}
-shadow_cv_mailfile=${SHADOW_MAILFILE}
-shadow_cv_utmpdir=${SHADOW_UTMPDIR}
-shadow_cv_logdir=${SHADOW_LOGDIR}
-shadow_cv_passwd_dir=${bindir}
-END
-""")
-        self.assertReferences(set(v))
-        self.assertExecs(set(["cat"]))
-
-#    def test_incomplete_command_expansion(self):
-#        self.assertRaises(reftracker.ShellSyntaxError, reftracker.execs,
-#                          bbvalue.shparse("cp foo`", self.d), self.d)
-
-#    def test_rogue_dollarsign(self):
-#        self.setValues({"D" : "/tmp"})
-#        self.parseExpression("install -d ${D}$")
-#        self.assertReferences(set(["D"]))
-#        self.assertExecs(set(["install"]))
-
-
-class PythonReferenceTest(ReferenceTest):
-
-    def setUp(self):
-        self.d = bb.data.init()
-        if hasattr(bb.utils, "_context"):
-            self.context = bb.utils._context
-        else:
-            import __builtin__
-            self.context = __builtin__.__dict__
-
-    def parseExpression(self, exp):
-        parsedvar = self.d.expandWithRefs(exp, None)
-        parser = bb.codeparser.PythonParser("ParserTest", logger)
-        parser.parse_python(parsedvar.value)
-
-        self.references = parsedvar.references | parser.references
-        self.execs = parser.execs
-
-    @staticmethod
-    def indent(value):
-        """Python Snippets have to be indented, python values don't have to
-be. These unit tests are testing snippets."""
-        return " " + value
-
-    def test_getvar_reference(self):
-        self.parseExpression("bb.data.getVar('foo', d, True)")
-        self.assertReferences(set(["foo"]))
-        self.assertExecs(set())
-
-    def test_getvar_computed_reference(self):
-        self.parseExpression("bb.data.getVar('f' + 'o' + 'o', d, True)")
-        self.assertReferences(set())
-        self.assertExecs(set())
-
-    def test_getvar_exec_reference(self):
-        self.parseExpression("eval('bb.data.getVar(\"foo\", d, True)')")
-        self.assertReferences(set())
-        self.assertExecs(set(["eval"]))
-
-    def test_var_reference(self):
-        self.context["foo"] = lambda x: x
-        self.setEmptyVars(["FOO"])
-        self.parseExpression("foo('${FOO}')")
-        self.assertReferences(set(["FOO"]))
-        self.assertExecs(set(["foo"]))
-        del self.context["foo"]
-
-    def test_var_exec(self):
-        for etype in ("func", "task"):
-            self.d.setVar("do_something", "echo 'hi mom! ${FOO}'")
-            self.d.setVarFlag("do_something", etype, True)
-            self.parseExpression("bb.build.exec_func('do_something', d)")
-            self.assertReferences(set(["do_something"]))
-
-    def test_function_reference(self):
-        self.context["testfunc"] = lambda msg: bb.msg.note(1, None, msg)
-        self.d.setVar("FOO", "Hello, World!")
-        self.parseExpression("testfunc('${FOO}')")
-        self.assertReferences(set(["FOO"]))
-        self.assertExecs(set(["testfunc"]))
-        del self.context["testfunc"]
-
-    def test_qualified_function_reference(self):
-        self.parseExpression("time.time()")
-        self.assertExecs(set(["time.time"]))
-
-    def test_qualified_function_reference_2(self):
-        self.parseExpression("os.path.dirname('/foo/bar')")
-        self.assertExecs(set(["os.path.dirname"]))
-
-    def test_qualified_function_reference_nested(self):
-        self.parseExpression("time.strftime('%Y%m%d',time.gmtime())")
-        self.assertExecs(set(["time.strftime", "time.gmtime"]))
-
-    def test_function_reference_chained(self):
-        self.context["testget"] = lambda: "\tstrip me "
-        self.parseExpression("testget().strip()")
-        self.assertExecs(set(["testget"]))
-        del self.context["testget"]
-
-
-class DependencyReferenceTest(ReferenceTest):
-
-    pydata = """
-bb.data.getVar('somevar', d, True)
-def test(d):
-    foo = 'bar %s' % 'foo'
-def test2(d):
-    d.getVar(foo, True)
-    d.getVar('bar', False)
-    test2(d)
-
-def a():
-    \"\"\"some
-    stuff
-    \"\"\"
-    return "heh"
-
-test(d)
-
-bb.data.expand(bb.data.getVar("something", False, d), d)
-bb.data.expand("${inexpand} somethingelse", d)
-bb.data.getVar(a(), d, False)
-"""
-
-    def test_python(self):
-        self.d.setVar("FOO", self.pydata)
-        self.setEmptyVars(["inexpand", "a", "test2", "test"])
-        self.d.setVarFlags("FOO", {"func": True, "python": True})
-
-        deps, values = bb.data.build_dependencies("FOO", set(self.d.keys()), set(), set(), self.d)
-
-        self.assertEquals(deps, set(["somevar", "bar", "something", "inexpand", "test", "test2", "a"]))
-
-
-    shelldata = """
-foo () {
-bar
-}
-{
-echo baz
-$(heh)
-eval `moo`
-}
-a=b
-c=d
-(
-true && false
-test -f foo
-testval=something
-$testval
-) || aiee
-! inverted
-echo ${somevar}
-
-case foo in
-bar)
-echo bar
-;;
-baz)
-echo baz
-;;
-foo*)
-echo foo
-;;
-esac
-"""
-
-    def test_shell(self):
-        execs = ["bar", "echo", "heh", "moo", "true", "aiee"]
-        self.d.setVar("somevar", "heh")
-        self.d.setVar("inverted", "echo inverted...")
-        self.d.setVarFlag("inverted", "func", True)
-        self.d.setVar("FOO", self.shelldata)
-        self.d.setVarFlags("FOO", {"func": True})
-        self.setEmptyVars(execs)
-
-        deps, values = bb.data.build_dependencies("FOO", set(self.d.keys()), set(), set(), self.d)
-
-        self.assertEquals(deps, set(["somevar", "inverted"] + execs))
-
-
-    def test_vardeps(self):
-        self.d.setVar("oe_libinstall", "echo test")
-        self.d.setVar("FOO", "foo=oe_libinstall; eval $foo")
-        self.d.setVarFlag("FOO", "vardeps", "oe_libinstall")
-
-        deps, values = bb.data.build_dependencies("FOO", set(self.d.keys()), set(), set(), self.d)
-
-        self.assertEquals(deps, set(["oe_libinstall"]))
-
-    def test_vardeps_expand(self):
-        self.d.setVar("oe_libinstall", "echo test")
-        self.d.setVar("FOO", "foo=oe_libinstall; eval $foo")
-        self.d.setVarFlag("FOO", "vardeps", "${@'oe_libinstall'}")
-
-        deps, values = bb.data.build_dependencies("FOO", set(self.d.keys()), set(), set(), self.d)
-
-        self.assertEquals(deps, set(["oe_libinstall"]))
-
-    #Currently no wildcard support
-    #def test_vardeps_wildcards(self):
-    #    self.d.setVar("oe_libinstall", "echo test")
-    #    self.d.setVar("FOO", "foo=oe_libinstall; eval $foo")
-    #    self.d.setVarFlag("FOO", "vardeps", "oe_*")
-    #    self.assertEquals(deps, set(["oe_libinstall"]))
-
-

bitbake/lib/bb/tests/cow.py

@@ -1,136 +0,0 @@
-# ex:ts=4:sw=4:sts=4:et
-# -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*-
-#
-# BitBake Tests for Copy-on-Write (cow.py)
-#
-# Copyright 2006 Holger Freyther <freyther@handhelds.org>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-
-import unittest
-import os
-
-class COWTestCase(unittest.TestCase):
-    """
-    Test case for the COW module from mithro
-    """
-
-    def testGetSet(self):
-        """
-        Test and set
-        """
-        from bb.COW import COWDictBase
-        a = COWDictBase.copy()
-
-        self.assertEquals(False, a.has_key('a'))
-
-        a['a'] = 'a'
-        a['b'] = 'b'
-        self.assertEquals(True, a.has_key('a'))
-        self.assertEquals(True, a.has_key('b'))
-        self.assertEquals('a', a['a'] )
-        self.assertEquals('b', a['b'] )
-
-    def testCopyCopy(self):
-        """
-        Test the copy of copies
-        """
-
-        from bb.COW import COWDictBase
-
-        # create two COW dict 'instances'
-        b = COWDictBase.copy()
-        c = COWDictBase.copy()
-
-        # assign some keys to one instance, some keys to another
-        b['a'] = 10
-        b['c'] = 20
-        c['a'] = 30
-
-        # test separation of the two instances
-        self.assertEquals(False, c.has_key('c'))
-        self.assertEquals(30, c['a'])
-        self.assertEquals(10, b['a'])
-
-        # test copy
-        b_2 = b.copy()
-        c_2 = c.copy()
-
-        self.assertEquals(False, c_2.has_key('c'))
-        self.assertEquals(10, b_2['a'])
-
-        b_2['d'] = 40
-        self.assertEquals(False, c_2.has_key('d'))
-        self.assertEquals(True, b_2.has_key('d'))
-        self.assertEquals(40, b_2['d'])
-        self.assertEquals(False, b.has_key('d'))
-        self.assertEquals(False, c.has_key('d'))
-
-        c_2['d'] = 30
-        self.assertEquals(True, c_2.has_key('d'))
-        self.assertEquals(True, b_2.has_key('d'))
-        self.assertEquals(30, c_2['d'])
-        self.assertEquals(40, b_2['d'])
-        self.assertEquals(False, b.has_key('d'))
-        self.assertEquals(False, c.has_key('d'))
-
-        # test copy of the copy
-        c_3 = c_2.copy()
-        b_3 = b_2.copy()
-        b_3_2 = b_2.copy()
-
-        c_3['e'] = 4711
-        self.assertEquals(4711, c_3['e'])
-        self.assertEquals(False, c_2.has_key('e'))
-        self.assertEquals(False, b_3.has_key('e'))
-        self.assertEquals(False, b_3_2.has_key('e'))
-        self.assertEquals(False, b_2.has_key('e'))
-
-        b_3['e'] = 'viel'
-        self.assertEquals('viel', b_3['e'])
-        self.assertEquals(4711, c_3['e'])
-        self.assertEquals(False, c_2.has_key('e'))
-        self.assertEquals(True, b_3.has_key('e'))
-        self.assertEquals(False, b_3_2.has_key('e'))
-        self.assertEquals(False, b_2.has_key('e'))
-
-    def testCow(self):
-        from bb.COW import COWDictBase
-        c = COWDictBase.copy()
-        c['123'] = 1027
-        c['other'] = 4711
-        c['d'] = { 'abc' : 10, 'bcd' : 20 }
-
-        copy = c.copy()
-
-        self.assertEquals(1027, c['123'])
-        self.assertEquals(4711, c['other'])
-        self.assertEquals({'abc':10, 'bcd':20}, c['d'])
-        self.assertEquals(1027, copy['123'])
-        self.assertEquals(4711, copy['other'])
-        self.assertEquals({'abc':10, 'bcd':20}, copy['d'])
-
-        # cow it now
-        copy['123'] = 1028
-        copy['other'] = 4712
-        copy['d']['abc'] = 20
-
-
-        self.assertEquals(1027, c['123'])
-        self.assertEquals(4711, c['other'])
-        self.assertEquals({'abc':10, 'bcd':20}, c['d'])
-        self.assertEquals(1028, copy['123'])
-        self.assertEquals(4712, copy['other'])
-        self.assertEquals({'abc':20, 'bcd':20}, copy['d'])

bitbake/lib/bb/tests/data.py

@@ -1,254 +0,0 @@
-# ex:ts=4:sw=4:sts=4:et
-# -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*-
-#
-# BitBake Tests for the Data Store (data.py/data_smart.py)
-#
-# Copyright (C) 2010 Chris Larson
-# Copyright (C) 2012 Richard Purdie
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-
-import unittest
-import bb
-import bb.data
-
-class DataExpansions(unittest.TestCase):
-    def setUp(self):
-        self.d = bb.data.init()
-        self.d["foo"] = "value of foo"
-        self.d["bar"] = "value of bar"
-        self.d["value of foo"] = "value of 'value of foo'"
-
-    def test_one_var(self):
-        val = self.d.expand("${foo}")
-        self.assertEqual(str(val), "value of foo")
-
-    def test_indirect_one_var(self):
-        val = self.d.expand("${${foo}}")
-        self.assertEqual(str(val), "value of 'value of foo'")
-
-    def test_indirect_and_another(self):
-        val = self.d.expand("${${foo}} ${bar}")
-        self.assertEqual(str(val), "value of 'value of foo' value of bar")
-
-    def test_python_snippet(self):
-        val = self.d.expand("${@5*12}")
-        self.assertEqual(str(val), "60")
-
-    def test_expand_in_python_snippet(self):
-        val = self.d.expand("${@'boo ' + '${foo}'}")
-        self.assertEqual(str(val), "boo value of foo")
-
-    def test_python_snippet_getvar(self):
-        val = self.d.expand("${@d.getVar('foo', True) + ' ${bar}'}")
-        self.assertEqual(str(val), "value of foo value of bar")
-
-    def test_python_snippet_syntax_error(self):
-        self.d.setVar("FOO", "${@foo = 5}")
-        self.assertRaises(bb.data_smart.ExpansionError, self.d.getVar, "FOO", True)
-
-    def test_python_snippet_runtime_error(self):
-        self.d.setVar("FOO", "${@int('test')}")
-        self.assertRaises(bb.data_smart.ExpansionError, self.d.getVar, "FOO", True)
-
-    def test_python_snippet_error_path(self):
-        self.d.setVar("FOO", "foo value ${BAR}")
-        self.d.setVar("BAR", "bar value ${@int('test')}")
-        self.assertRaises(bb.data_smart.ExpansionError, self.d.getVar, "FOO", True)
-
-    def test_value_containing_value(self):
-        val = self.d.expand("${@d.getVar('foo', True) + ' ${bar}'}")
-        self.assertEqual(str(val), "value of foo value of bar")
-
-    def test_reference_undefined_var(self):
-        val = self.d.expand("${undefinedvar} meh")
-        self.assertEqual(str(val), "${undefinedvar} meh")
-
-    def test_double_reference(self):
-        self.d.setVar("BAR", "bar value")
-        self.d.setVar("FOO", "${BAR} foo ${BAR}")
-        val = self.d.getVar("FOO", True)
-        self.assertEqual(str(val), "bar value foo bar value")
-
-    def test_direct_recursion(self):
-        self.d.setVar("FOO", "${FOO}")
-        self.assertRaises(bb.data_smart.ExpansionError, self.d.getVar, "FOO", True)
-
-    def test_indirect_recursion(self):
-        self.d.setVar("FOO", "${BAR}")
-        self.d.setVar("BAR", "${BAZ}")
-        self.d.setVar("BAZ", "${FOO}")
-        self.assertRaises(bb.data_smart.ExpansionError, self.d.getVar, "FOO", True)
-
-    def test_recursion_exception(self):
-        self.d.setVar("FOO", "${BAR}")
-        self.d.setVar("BAR", "${${@'FOO'}}")
-        self.assertRaises(bb.data_smart.ExpansionError, self.d.getVar, "FOO", True)
-
-    def test_incomplete_varexp_single_quotes(self):
-        self.d.setVar("FOO", "sed -i -e 's:IP{:I${:g' $pc")
-        val = self.d.getVar("FOO", True)
-        self.assertEqual(str(val), "sed -i -e 's:IP{:I${:g' $pc")
-
-    def test_nonstring(self):
-        self.d.setVar("TEST", 5)
-        val = self.d.getVar("TEST", True)
-        self.assertEqual(str(val), "5")
-
-    def test_rename(self):
-        self.d.renameVar("foo", "newfoo")
-        self.assertEqual(self.d.getVar("newfoo"), "value of foo")
-        self.assertEqual(self.d.getVar("foo"), None)
-
-    def test_deletion(self):
-        self.d.delVar("foo")
-        self.assertEqual(self.d.getVar("foo"), None)
-
-    def test_keys(self):
-        keys = self.d.keys()
-        self.assertEqual(keys, ['value of foo', 'foo', 'bar'])
-
-class TestNestedExpansions(unittest.TestCase):
-    def setUp(self):
-        self.d = bb.data.init()
-        self.d["foo"] = "foo"
-        self.d["bar"] = "bar"
-        self.d["value of foobar"] = "187"
-
-    def test_refs(self):
-        val = self.d.expand("${value of ${foo}${bar}}")
-        self.assertEqual(str(val), "187")
-
-    #def test_python_refs(self):
-    #    val = self.d.expand("${@${@3}**2 + ${@4}**2}")
-    #    self.assertEqual(str(val), "25")
-
-    def test_ref_in_python_ref(self):
-        val = self.d.expand("${@'${foo}' + 'bar'}")
-        self.assertEqual(str(val), "foobar")
-
-    def test_python_ref_in_ref(self):
-        val = self.d.expand("${${@'f'+'o'+'o'}}")
-        self.assertEqual(str(val), "foo")
-
-    def test_deep_nesting(self):
-        depth = 100
-        val = self.d.expand("${" * depth + "foo" + "}" * depth)
-        self.assertEqual(str(val), "foo")
-
-    #def test_deep_python_nesting(self):
-    #    depth = 50
-    #    val = self.d.expand("${@" * depth + "1" + "+1}" * depth)
-    #    self.assertEqual(str(val), str(depth + 1))
-
-    def test_mixed(self):
-        val = self.d.expand("${value of ${@('${foo}'+'bar')[0:3]}${${@'BAR'.lower()}}}")
-        self.assertEqual(str(val), "187")
-
-    def test_runtime(self):
-        val = self.d.expand("${${@'value of' + ' f'+'o'+'o'+'b'+'a'+'r'}}")
-        self.assertEqual(str(val), "187")
-
-class TestMemoize(unittest.TestCase):
-    def test_memoized(self):
-        d = bb.data.init()
-        d.setVar("FOO", "bar")
-        self.assertTrue(d.getVar("FOO") is d.getVar("FOO"))
-
-    def test_not_memoized(self):
-        d1 = bb.data.init()
-        d2 = bb.data.init()
-        d1.setVar("FOO", "bar")
-        d2.setVar("FOO", "bar2")
-        self.assertTrue(d1.getVar("FOO") is not d2.getVar("FOO"))
-
-    def test_changed_after_memoized(self):
-        d = bb.data.init()
-        d.setVar("foo", "value of foo")
-        self.assertEqual(str(d.getVar("foo")), "value of foo")
-        d.setVar("foo", "second value of foo")
-        self.assertEqual(str(d.getVar("foo")), "second value of foo")
-
-    def test_same_value(self):
-        d = bb.data.init()
-        d.setVar("foo", "value of")
-        d.setVar("bar", "value of")
-        self.assertEqual(d.getVar("foo"),
-                         d.getVar("bar"))
-
-class TestConcat(unittest.TestCase):
-    def setUp(self):
-        self.d = bb.data.init()
-        self.d.setVar("FOO", "foo")
-        self.d.setVar("VAL", "val")
-        self.d.setVar("BAR", "bar")
-
-    def test_prepend(self):
-        self.d.setVar("TEST", "${VAL}")
-        self.d.prependVar("TEST", "${FOO}:")
-        self.assertEqual(self.d.getVar("TEST", True), "foo:val")
-
-    def test_append(self):
-        self.d.setVar("TEST", "${VAL}")
-        self.d.appendVar("TEST", ":${BAR}")
-        self.assertEqual(self.d.getVar("TEST", True), "val:bar")
-
-    def test_multiple_append(self):
-        self.d.setVar("TEST", "${VAL}")
-        self.d.prependVar("TEST", "${FOO}:")
-        self.d.appendVar("TEST", ":val2")
-        self.d.appendVar("TEST", ":${BAR}")
-        self.assertEqual(self.d.getVar("TEST", True), "foo:val:val2:bar")
-
-class TestOverrides(unittest.TestCase):
-    def setUp(self):
-        self.d = bb.data.init()
-        self.d.setVar("OVERRIDES", "foo:bar:local")
-        self.d.setVar("TEST", "testvalue")
-
-    def test_no_override(self):
-        bb.data.update_data(self.d)
-        self.assertEqual(self.d.getVar("TEST", True), "testvalue")
-
-    def test_one_override(self):
-        self.d.setVar("TEST_bar", "testvalue2")
-        bb.data.update_data(self.d)
-        self.assertEqual(self.d.getVar("TEST", True), "testvalue2")
-
-    def test_multiple_override(self):
-        self.d.setVar("TEST_bar", "testvalue2")
-        self.d.setVar("TEST_local", "testvalue3")
-        self.d.setVar("TEST_foo", "testvalue4")
-        bb.data.update_data(self.d)
-        self.assertEqual(self.d.getVar("TEST", True), "testvalue3")
-
-
-class TestFlags(unittest.TestCase):
-    def setUp(self):
-        self.d = bb.data.init()
-        self.d.setVar("foo", "value of foo")
-        self.d.setVarFlag("foo", "flag1", "value of flag1")
-        self.d.setVarFlag("foo", "flag2", "value of flag2")
-
-    def test_setflag(self):
-        self.assertEqual(self.d.getVarFlag("foo", "flag1"), "value of flag1")
-        self.assertEqual(self.d.getVarFlag("foo", "flag2"), "value of flag2")
-
-    def test_delflag(self):
-        self.d.delVarFlag("foo", "flag2")
-        self.assertEqual(self.d.getVarFlag("foo", "flag1"), "value of flag1")
-        self.assertEqual(self.d.getVarFlag("foo", "flag2"), None)
-
-

bitbake/lib/bb/tests/fetch.py

@@ -1,425 +0,0 @@
-# ex:ts=4:sw=4:sts=4:et
-# -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*-
-#
-# BitBake Tests for the Fetcher (fetch2/)
-#
-# Copyright (C) 2012 Richard Purdie
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-
-import unittest
-import tempfile
-import subprocess
-import os
-from bb.fetch2 import URI
-import bb
-
-class URITest(unittest.TestCase):
-    test_uris = {
-        "http://www.google.com/index.html" : {
-            'uri': 'http://www.google.com/index.html',
-            'scheme': 'http',
-            'hostname': 'www.google.com',
-            'port': None,
-            'hostport': 'www.google.com',
-            'path': '/index.html',
-            'userinfo': '',
-            'username': '',
-            'password': '',
-            'params': {},
-            'relative': False
-        },
-        "http://www.google.com/index.html;param1=value1" : {
-            'uri': 'http://www.google.com/index.html;param1=value1',
-            'scheme': 'http',
-            'hostname': 'www.google.com',
-            'port': None,
-            'hostport': 'www.google.com',
-            'path': '/index.html',
-            'userinfo': '',
-            'username': '',
-            'password': '',
-            'params': {
-                'param1': 'value1'
-            },
-            'relative': False
-        },
-        "http://www.example.com:8080/index.html" : {
-            'uri': 'http://www.example.com:8080/index.html',
-            'scheme': 'http',
-            'hostname': 'www.example.com',
-            'port': 8080,
-            'hostport': 'www.example.com:8080',
-            'path': '/index.html',
-            'userinfo': '',
-            'username': '',
-            'password': '',
-            'params': {},
-            'relative': False
-        },
-        "cvs://anoncvs@cvs.handhelds.org/cvs;module=familiar/dist/ipkg" : {
-            'uri': 'cvs://anoncvs@cvs.handhelds.org/cvs;module=familiar/dist/ipkg',
-            'scheme': 'cvs',
-            'hostname': 'cvs.handhelds.org',
-            'port': None,
-            'hostport': 'cvs.handhelds.org',
-            'path': '/cvs',
-            'userinfo': 'anoncvs',
-            'username': 'anoncvs',
-            'password': '',
-            'params': {
-                'module': 'familiar/dist/ipkg'
-            },
-            'relative': False
-        },
-        "cvs://anoncvs:anonymous@cvs.handhelds.org/cvs;tag=V0-99-81;module=familiar/dist/ipkg": {
-            'uri': 'cvs://anoncvs:anonymous@cvs.handhelds.org/cvs;tag=V0-99-81;module=familiar/dist/ipkg',
-            'scheme': 'cvs',
-            'hostname': 'cvs.handhelds.org',
-            'port': None,
-            'hostport': 'cvs.handhelds.org',
-            'path': '/cvs',
-            'userinfo': 'anoncvs:anonymous',
-            'username': 'anoncvs',
-            'password': 'anonymous',
-            'params': {
-                'tag': 'V0-99-81',
-                'module': 'familiar/dist/ipkg'
-            },
-            'relative': False
-        },
-        "file://example.diff": { # NOTE: Not RFC compliant!
-            'uri': 'file:example.diff',
-            'scheme': 'file',
-            'hostname': '',
-            'port': None,
-            'hostport': '',
-            'path': 'example.diff',
-            'userinfo': '',
-            'username': '',
-            'password': '',
-            'params': {},
-            'relative': True
-        },
-        "file:example.diff": { # NOTE: RFC compliant version of the former
-            'uri': 'file:example.diff',
-            'scheme': 'file',
-            'hostname': '',
-            'port': None,
-            'hostport': '',
-            'path': 'example.diff',
-            'userinfo': '',
-            'userinfo': '',
-            'username': '',
-            'password': '',
-            'params': {},
-            'relative': True
-        },
-        "file:///tmp/example.diff": {
-            'uri': 'file:///tmp/example.diff',
-            'scheme': 'file',
-            'hostname': '',
-            'port': None,
-            'hostport': '',
-            'path': '/tmp/example.diff',
-            'userinfo': '',
-            'userinfo': '',
-            'username': '',
-            'password': '',
-            'params': {},
-            'relative': False
-        },
-        "git:///path/example.git": {
-            'uri': 'git:///path/example.git',
-            'scheme': 'git',
-            'hostname': '',
-            'port': None,
-            'hostport': '',
-            'path': '/path/example.git',
-            'userinfo': '',
-            'userinfo': '',
-            'username': '',
-            'password': '',
-            'params': {},
-            'relative': False
-        },
-        "git:path/example.git": {
-            'uri': 'git:path/example.git',
-            'scheme': 'git',
-            'hostname': '',
-            'port': None,
-            'hostport': '',
-            'path': 'path/example.git',
-            'userinfo': '',
-            'userinfo': '',
-            'username': '',
-            'password': '',
-            'params': {},
-            'relative': True
-        },
-        "git://example.net/path/example.git": {
-            'uri': 'git://example.net/path/example.git',
-            'scheme': 'git',
-            'hostname': 'example.net',
-            'port': None,
-            'hostport': 'example.net',
-            'path': '/path/example.git',
-            'userinfo': '',
-            'userinfo': '',
-            'username': '',
-            'password': '',
-            'params': {},
-            'relative': False
-        }
-    }
-
-    def test_uri(self):
-        for test_uri, ref in self.test_uris.items():
-            uri = URI(test_uri)
-
-            self.assertEqual(str(uri), ref['uri'])
-
-            # expected attributes
-            self.assertEqual(uri.scheme, ref['scheme'])
-
-            self.assertEqual(uri.userinfo, ref['userinfo'])
-            self.assertEqual(uri.username, ref['username'])
-            self.assertEqual(uri.password, ref['password'])
-
-            self.assertEqual(uri.hostname, ref['hostname'])
-            self.assertEqual(uri.port, ref['port'])
-            self.assertEqual(uri.hostport, ref['hostport'])
-
-            self.assertEqual(uri.path, ref['path'])
-            self.assertEqual(uri.params, ref['params'])
-
-            self.assertEqual(uri.relative, ref['relative'])
-
-    def test_dict(self):
-        for test in self.test_uris.values():
-            uri = URI()
-
-            self.assertEqual(uri.scheme, '')
-            self.assertEqual(uri.userinfo, '')
-            self.assertEqual(uri.username, '')
-            self.assertEqual(uri.password, '')
-            self.assertEqual(uri.hostname, '')
-            self.assertEqual(uri.port, None)
-            self.assertEqual(uri.path, '')
-            self.assertEqual(uri.params, {})
-
-
-            uri.scheme = test['scheme']
-            self.assertEqual(uri.scheme, test['scheme'])
-
-            uri.userinfo = test['userinfo']
-            self.assertEqual(uri.userinfo, test['userinfo'])
-            self.assertEqual(uri.username, test['username'])
-            self.assertEqual(uri.password, test['password'])
-
-            uri.hostname = test['hostname']
-            self.assertEqual(uri.hostname, test['hostname'])
-            self.assertEqual(uri.hostport, test['hostname'])
-
-            uri.port = test['port']
-            self.assertEqual(uri.port, test['port'])
-            self.assertEqual(uri.hostport, test['hostport'])
-
-            uri.path = test['path']
-            self.assertEqual(uri.path, test['path'])
-
-            uri.params = test['params']
-            self.assertEqual(uri.params, test['params'])
-
-            self.assertEqual(str(uri)+str(uri.relative), str(test['uri'])+str(test['relative']))
-
-            self.assertEqual(str(uri), test['uri'])
-
-            uri.params = {}
-            self.assertEqual(uri.params, {})
-            self.assertEqual(str(uri), (str(uri).split(";"))[0])
-
-class FetcherTest(unittest.TestCase):
-
-    def setUp(self):
-        self.d = bb.data.init()
-        self.tempdir = tempfile.mkdtemp()
-        self.dldir = os.path.join(self.tempdir, "download")
-        os.mkdir(self.dldir)
-        self.d.setVar("DL_DIR", self.dldir)
-        self.unpackdir = os.path.join(self.tempdir, "unpacked")
-        os.mkdir(self.unpackdir)
-        persistdir = os.path.join(self.tempdir, "persistdata")
-        self.d.setVar("PERSISTENT_DIR", persistdir)
-
-    def tearDown(self):
-        bb.utils.prunedir(self.tempdir)
-
-class MirrorUriTest(FetcherTest):
-
-    replaceuris = {
-        ("git://git.invalid.infradead.org/mtd-utils.git;tag=1234567890123456789012345678901234567890", "git://.*/.*", "http://somewhere.org/somedir/") 
-            : "http://somewhere.org/somedir/git2_git.invalid.infradead.org.mtd-utils.git.tar.gz",
-        ("git://git.invalid.infradead.org/mtd-utils.git;tag=1234567890123456789012345678901234567890", "git://.*/([^/]+/)*([^/]*)", "git://somewhere.org/somedir/\\2;protocol=http") 
-            : "git://somewhere.org/somedir/mtd-utils.git;tag=1234567890123456789012345678901234567890;protocol=http", 
-        ("git://git.invalid.infradead.org/foo/mtd-utils.git;tag=1234567890123456789012345678901234567890", "git://.*/([^/]+/)*([^/]*)", "git://somewhere.org/somedir/\\2;protocol=http") 
-            : "git://somewhere.org/somedir/mtd-utils.git;tag=1234567890123456789012345678901234567890;protocol=http", 
-        ("git://git.invalid.infradead.org/foo/mtd-utils.git;tag=1234567890123456789012345678901234567890", "git://.*/([^/]+/)*([^/]*)", "git://somewhere.org/\\2;protocol=http") 
-            : "git://somewhere.org/mtd-utils.git;tag=1234567890123456789012345678901234567890;protocol=http", 
-        ("git://someserver.org/bitbake;tag=1234567890123456789012345678901234567890", "git://someserver.org/bitbake", "git://git.openembedded.org/bitbake")
-            : "git://git.openembedded.org/bitbake;tag=1234567890123456789012345678901234567890",
-        ("file://sstate-xyz.tgz", "file://.*", "file:///somewhere/1234/sstate-cache") 
-            : "file:///somewhere/1234/sstate-cache/sstate-xyz.tgz",
-        ("file://sstate-xyz.tgz", "file://.*", "file:///somewhere/1234/sstate-cache/") 
-            : "file:///somewhere/1234/sstate-cache/sstate-xyz.tgz",
-        ("http://somewhere.org/somedir1/somedir2/somefile_1.2.3.tar.gz", "http://.*/.*", "http://somewhere2.org/somedir3") 
-            : "http://somewhere2.org/somedir3/somefile_1.2.3.tar.gz",
-        ("http://somewhere.org/somedir1/somefile_1.2.3.tar.gz", "http://somewhere.org/somedir1/somefile_1.2.3.tar.gz", "http://somewhere2.org/somedir3/somefile_1.2.3.tar.gz") 
-            : "http://somewhere2.org/somedir3/somefile_1.2.3.tar.gz",
-        ("http://www.apache.org/dist/subversion/subversion-1.7.1.tar.bz2", "http://www.apache.org/dist", "http://archive.apache.org/dist")
-            : "http://archive.apache.org/dist/subversion/subversion-1.7.1.tar.bz2",
-        ("http://www.apache.org/dist/subversion/subversion-1.7.1.tar.bz2", "http://.*/.*", "file:///somepath/downloads/")
-            : "file:///somepath/downloads/subversion-1.7.1.tar.bz2",
-        ("git://git.invalid.infradead.org/mtd-utils.git;tag=1234567890123456789012345678901234567890", "git://.*/.*", "git://somewhere.org/somedir/BASENAME;protocol=http") 
-            : "git://somewhere.org/somedir/mtd-utils.git;tag=1234567890123456789012345678901234567890;protocol=http", 
-        ("git://git.invalid.infradead.org/foo/mtd-utils.git;tag=1234567890123456789012345678901234567890", "git://.*/.*", "git://somewhere.org/somedir/BASENAME;protocol=http") 
-            : "git://somewhere.org/somedir/mtd-utils.git;tag=1234567890123456789012345678901234567890;protocol=http", 
-        ("git://git.invalid.infradead.org/foo/mtd-utils.git;tag=1234567890123456789012345678901234567890", "git://.*/.*", "git://somewhere.org/somedir/MIRRORNAME;protocol=http") 
-            : "git://somewhere.org/somedir/git.invalid.infradead.org.foo.mtd-utils.git;tag=1234567890123456789012345678901234567890;protocol=http", 
-
-        #Renaming files doesn't work
-        #("http://somewhere.org/somedir1/somefile_1.2.3.tar.gz", "http://somewhere.org/somedir1/somefile_1.2.3.tar.gz", "http://somewhere2.org/somedir3/somefile_2.3.4.tar.gz") : "http://somewhere2.org/somedir3/somefile_2.3.4.tar.gz"
-        #("file://sstate-xyz.tgz", "file://.*/.*", "file:///somewhere/1234/sstate-cache") : "file:///somewhere/1234/sstate-cache/sstate-xyz.tgz",
-    }
-
-    mirrorvar = "http://.*/.* file:///somepath/downloads/ \n" \
-                "git://someserver.org/bitbake git://git.openembedded.org/bitbake \n" \
-                "https://.*/.* file:///someotherpath/downloads/ \n" \
-                "http://.*/.* file:///someotherpath/downloads/ \n"
-
-    def test_urireplace(self):
-        for k, v in self.replaceuris.items():
-            ud = bb.fetch.FetchData(k[0], self.d)
-            ud.setup_localpath(self.d)
-            mirrors = bb.fetch2.mirror_from_string("%s %s" % (k[1], k[2]))
-            newuris, uds = bb.fetch2.build_mirroruris(ud, mirrors, self.d)
-            self.assertEqual([v], newuris)
-
-    def test_urilist1(self):
-        fetcher = bb.fetch.FetchData("http://downloads.yoctoproject.org/releases/bitbake/bitbake-1.0.tar.gz", self.d)
-        mirrors = bb.fetch2.mirror_from_string(self.mirrorvar)
-        uris, uds = bb.fetch2.build_mirroruris(fetcher, mirrors, self.d)
-        self.assertEqual(uris, ['file:///somepath/downloads/bitbake-1.0.tar.gz', 'file:///someotherpath/downloads/bitbake-1.0.tar.gz'])
-
-    def test_urilist2(self):
-        # Catch https:// -> files:// bug
-        fetcher = bb.fetch.FetchData("https://downloads.yoctoproject.org/releases/bitbake/bitbake-1.0.tar.gz", self.d)
-        mirrors = bb.fetch2.mirror_from_string(self.mirrorvar)
-        uris, uds = bb.fetch2.build_mirroruris(fetcher, mirrors, self.d)
-        self.assertEqual(uris, ['file:///someotherpath/downloads/bitbake-1.0.tar.gz'])
-
-class FetcherNetworkTest(FetcherTest):
-
-    if os.environ.get("BB_SKIP_NETTESTS") == "yes":
-        print("Unset BB_SKIP_NETTESTS to run network tests")
-    else:
-        def test_fetch(self):
-            fetcher = bb.fetch.Fetch(["http://downloads.yoctoproject.org/releases/bitbake/bitbake-1.0.tar.gz", "http://downloads.yoctoproject.org/releases/bitbake/bitbake-1.1.tar.gz"], self.d)
-            fetcher.download()
-            self.assertEqual(os.path.getsize(self.dldir + "/bitbake-1.0.tar.gz"), 57749)
-            self.assertEqual(os.path.getsize(self.dldir + "/bitbake-1.1.tar.gz"), 57892)
-            self.d.setVar("BB_NO_NETWORK", "1")
-            fetcher = bb.fetch.Fetch(["http://downloads.yoctoproject.org/releases/bitbake/bitbake-1.0.tar.gz", "http://downloads.yoctoproject.org/releases/bitbake/bitbake-1.1.tar.gz"], self.d)
-            fetcher.download()
-            fetcher.unpack(self.unpackdir)
-            self.assertEqual(len(os.listdir(self.unpackdir + "/bitbake-1.0/")), 9)
-            self.assertEqual(len(os.listdir(self.unpackdir + "/bitbake-1.1/")), 9)
-
-        def test_fetch_mirror(self):
-            self.d.setVar("MIRRORS", "http://.*/.* http://downloads.yoctoproject.org/releases/bitbake")
-            fetcher = bb.fetch.Fetch(["http://invalid.yoctoproject.org/releases/bitbake/bitbake-1.0.tar.gz"], self.d)
-            fetcher.download()
-            self.assertEqual(os.path.getsize(self.dldir + "/bitbake-1.0.tar.gz"), 57749)
-
-        def test_fetch_premirror(self):
-            self.d.setVar("PREMIRRORS", "http://.*/.* http://downloads.yoctoproject.org/releases/bitbake")
-            fetcher = bb.fetch.Fetch(["http://invalid.yoctoproject.org/releases/bitbake/bitbake-1.0.tar.gz"], self.d)
-            fetcher.download()
-            self.assertEqual(os.path.getsize(self.dldir + "/bitbake-1.0.tar.gz"), 57749)
-
-        def gitfetcher(self, url1, url2):
-            def checkrevision(self, fetcher):
-                fetcher.unpack(self.unpackdir)
-                revision = bb.process.run("git rev-parse HEAD", shell=True, cwd=self.unpackdir + "/git")[0].strip()
-                self.assertEqual(revision, "270a05b0b4ba0959fe0624d2a4885d7b70426da5")
-
-            self.d.setVar("BB_GENERATE_MIRROR_TARBALLS", "1")
-            self.d.setVar("SRCREV", "270a05b0b4ba0959fe0624d2a4885d7b70426da5")
-            fetcher = bb.fetch.Fetch([url1], self.d)
-            fetcher.download()
-            checkrevision(self, fetcher)
-            # Wipe out the dldir clone and the unpacked source, turn off the network and check mirror tarball works
-            bb.utils.prunedir(self.dldir + "/git2/")
-            bb.utils.prunedir(self.unpackdir)
-            self.d.setVar("BB_NO_NETWORK", "1")
-            fetcher = bb.fetch.Fetch([url2], self.d)
-            fetcher.download()
-            checkrevision(self, fetcher)
-
-        def test_gitfetch(self):
-            url1 = url2 = "git://git.openembedded.org/bitbake"
-            self.gitfetcher(url1, url2)
-
-        def test_gitfetch_premirror(self):
-            url1 = "git://git.openembedded.org/bitbake"
-            url2 = "git://someserver.org/bitbake"
-            self.d.setVar("PREMIRRORS", "git://someserver.org/bitbake git://git.openembedded.org/bitbake \n")
-            self.gitfetcher(url1, url2)
-
-        def test_gitfetch_premirror2(self):
-            url1 = url2 = "git://someserver.org/bitbake"
-            self.d.setVar("PREMIRRORS", "git://someserver.org/bitbake git://git.openembedded.org/bitbake \n")
-            self.gitfetcher(url1, url2)
-
-        def test_gitfetch_premirror3(self):
-            realurl = "git://git.openembedded.org/bitbake"
-            dummyurl = "git://someserver.org/bitbake"
-            self.sourcedir = self.unpackdir.replace("unpacked", "sourcemirror.git")
-            os.chdir(self.tempdir)
-            bb.process.run("git clone %s %s 2> /dev/null" % (realurl, self.sourcedir), shell=True)
-            self.d.setVar("PREMIRRORS", "%s git://%s;protocol=file \n" % (dummyurl, self.sourcedir))
-            self.gitfetcher(dummyurl, dummyurl)
-
-class URLHandle(unittest.TestCase):
-
-    datatable = {
-       "http://www.google.com/index.html" : ('http', 'www.google.com', '/index.html', '', '', {}),
-       "cvs://anoncvs@cvs.handhelds.org/cvs;module=familiar/dist/ipkg" : ('cvs', 'cvs.handhelds.org', '/cvs', 'anoncvs', '', {'module': 'familiar/dist/ipkg'}),
-       "cvs://anoncvs:anonymous@cvs.handhelds.org/cvs;tag=V0-99-81;module=familiar/dist/ipkg" : ('cvs', 'cvs.handhelds.org', '/cvs', 'anoncvs', 'anonymous', {'tag': 'V0-99-81', 'module': 'familiar/dist/ipkg'}),
-       "git://git.openembedded.org/bitbake;branch=@foo" : ('git', 'git.openembedded.org', '/bitbake', '', '', {'branch': '@foo'})
-    }
-
-    def test_decodeurl(self):
-        for k, v in self.datatable.items():
-            result = bb.fetch.decodeurl(k)
-            self.assertEqual(result, v)
-
-    def test_encodeurl(self):
-        for k, v in self.datatable.items():
-            result = bb.fetch.encodeurl(v)
-            self.assertEqual(result, k)
-
-
-

bitbake/lib/bb/tests/utils.py

@@ -1,53 +0,0 @@
-# ex:ts=4:sw=4:sts=4:et
-# -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*-
-#
-# BitBake Tests for utils.py
-#
-# Copyright (C) 2012 Richard Purdie
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-
-import unittest
-import bb
-
-class VerCmpString(unittest.TestCase):
-
-    def test_vercmpstring(self):
-        result = bb.utils.vercmp_string('1', '2')
-        self.assertTrue(result < 0)
-        result = bb.utils.vercmp_string('2', '1')
-        self.assertTrue(result > 0)
-        result = bb.utils.vercmp_string('1', '1.0')
-        self.assertTrue(result < 0)
-        result = bb.utils.vercmp_string('1', '1.1')
-        self.assertTrue(result < 0)
-        result = bb.utils.vercmp_string('1.1', '1_p2')
-        self.assertTrue(result < 0)
-
-    def test_explode_dep_versions(self):
-        correctresult = {"foo" : ["= 1.10"]}
-        result = bb.utils.explode_dep_versions2("foo (= 1.10)")
-        self.assertEqual(result, correctresult)
-        result = bb.utils.explode_dep_versions2("foo (=1.10)")
-        self.assertEqual(result, correctresult)
-        result = bb.utils.explode_dep_versions2("foo ( = 1.10)")
-        self.assertEqual(result, correctresult)
-        result = bb.utils.explode_dep_versions2("foo ( =1.10)")
-        self.assertEqual(result, correctresult)
-        result = bb.utils.explode_dep_versions2("foo ( = 1.10 )")
-        self.assertEqual(result, correctresult)
-        result = bb.utils.explode_dep_versions2("foo ( =1.10 )")
-        self.assertEqual(result, correctresult)
-

bitbake/lib/bb/tinfoil.py

@@ -1,100 +0,0 @@
-# tinfoil: a simple wrapper around cooker for bitbake-based command-line utilities
-#
-# Copyright (C) 2012 Intel Corporation
-# Copyright (C) 2011 Mentor Graphics Corporation
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-import logging
-import warnings
-import os
-import sys
-
-import bb.cache
-import bb.cooker
-import bb.providers
-import bb.utils
-from bb.cooker import state
-import bb.fetch2
-
-class Tinfoil:
-    def __init__(self, output=sys.stdout):
-        # Needed to avoid deprecation warnings with python 2.6
-        warnings.filterwarnings("ignore", category=DeprecationWarning)
-
-        # Set up logging
-        self.logger = logging.getLogger('BitBake')
-        console = logging.StreamHandler(output)
-        bb.msg.addDefaultlogFilter(console)
-        format = bb.msg.BBLogFormatter("%(levelname)s: %(message)s")
-        if output.isatty():
-            format.enable_color()
-        console.setFormatter(format)
-        self.logger.addHandler(console)
-
-        initialenv = os.environ.copy()
-        bb.utils.clean_environment()
-        self.config = TinfoilConfig(parse_only=True)
-        self.cooker = bb.cooker.BBCooker(self.config,
-                                            self.register_idle_function,
-                                            initialenv)
-        self.config_data = self.cooker.configuration.data
-        bb.providers.logger.setLevel(logging.ERROR)
-        self.cooker_data = None
-
-    def register_idle_function(self, function, data):
-        pass
-
-    def parseRecipes(self):
-        sys.stderr.write("Parsing recipes..")
-        self.logger.setLevel(logging.WARNING)
-
-        try:
-            while self.cooker.state in (state.initial, state.parsing):
-                self.cooker.updateCache()
-        except KeyboardInterrupt:
-            self.cooker.shutdown()
-            self.cooker.updateCache()
-            sys.exit(2)
-
-        self.logger.setLevel(logging.INFO)
-        sys.stderr.write("done.\n")
-
-        self.cooker_data = self.cooker.status
-
-    def prepare(self, config_only = False):
-        if not self.cooker_data:
-            if config_only:
-                self.cooker.parseConfiguration()
-                self.cooker_data = self.cooker.status
-            else:
-                self.parseRecipes()
-
-
-class TinfoilConfig(object):
-    def __init__(self, **options):
-        self.pkgs_to_build = []
-        self.debug_domains = []
-        self.extra_assume_provided = []
-        self.prefile = []
-        self.postfile = []
-        self.debug = 0
-        self.__dict__.update(options)
-
-    def __getattr__(self, attribute):
-        try:
-            return super(TinfoilConfig, self).__getattribute__(attribute)
-        except AttributeError:
-            return None
-

bitbake/lib/bb/ui/crumbs/builddetailspage.py

@@ -1,436 +0,0 @@
-#!/usr/bin/env python
-#
-# BitBake Graphical GTK User Interface
-#
-# Copyright (C) 2012        Intel Corporation
-#
-# Authored by Dongxiao Xu <dongxiao.xu@intel.com>
-# Authored by Shane Wang <shane.wang@intel.com>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-import gtk
-import pango
-import gobject
-import bb.process
-from bb.ui.crumbs.progressbar import HobProgressBar
-from bb.ui.crumbs.hobwidget import hic, HobNotebook, HobAltButton, HobWarpCellRendererText, HobButton, HobInfoButton
-from bb.ui.crumbs.runningbuild import RunningBuildTreeView
-from bb.ui.crumbs.runningbuild import BuildFailureTreeView
-from bb.ui.crumbs.hobpages import HobPage
-from bb.ui.crumbs.hobcolor import HobColors
-
-class BuildConfigurationTreeView(gtk.TreeView):
-    def __init__ (self):
-        gtk.TreeView.__init__(self)
-        self.set_rules_hint(False)
-        self.set_headers_visible(False)
-        self.set_property("hover-expand", True)
-        self.get_selection().set_mode(gtk.SELECTION_SINGLE)
-
-        # The icon that indicates whether we're building or failed.
-        renderer0 = gtk.CellRendererText()
-        renderer0.set_property('font-desc', pango.FontDescription('courier bold 12'))
-        col0 = gtk.TreeViewColumn ("Name", renderer0, text=0)
-        self.append_column (col0)
-
-        # The message of configuration.
-        renderer1 = HobWarpCellRendererText(col_number=1)
-        col1 = gtk.TreeViewColumn ("Values", renderer1, text=1)
-        self.append_column (col1)
-
-    def set_vars(self, key="", var=[""]):
-        d = {}
-        if type(var) == str:
-            d = {key: [var]}
-        elif type(var) == list and len(var) > 1:
-            #create the sub item line
-            l = []
-            text = ""
-            for item in var:
-                text = " - " + item
-                l.append(text)
-            d = {key: var}
-
-        return d
-
-    def set_config_model(self, show_vars):
-        listmodel = gtk.TreeStore(gobject.TYPE_STRING, gobject.TYPE_STRING)
-        parent = None
-        for var in show_vars:
-            for subitem in var.items():
-                name = subitem[0]
-                is_parent = True
-                for value in subitem[1]:
-                    if is_parent:
-                        parent = listmodel.append(parent, (name, value))
-                        is_parent = False
-                    else:
-                        listmodel.append(parent, (None, value))
-                    name = "     - "
-                parent = None
-        # renew the tree model after get the configuration messages
-        self.set_model(listmodel)
-
-    def show(self, src_config_info, src_params):
-        vars = []
-        vars.append(self.set_vars("BB version:", src_params.bb_version))
-        vars.append(self.set_vars("Target arch:", src_params.target_arch))
-        vars.append(self.set_vars("Target OS:", src_params.target_os))
-        vars.append(self.set_vars("Machine:", src_config_info.curr_mach))
-        vars.append(self.set_vars("Distro:", src_config_info.curr_distro))
-        vars.append(self.set_vars("Distro version:", src_params.distro_version))
-        vars.append(self.set_vars("SDK machine:", src_config_info.curr_sdk_machine))
-        vars.append(self.set_vars("Tune features:", src_params.tune_pkgarch))
-        vars.append(self.set_vars("Layers:", src_config_info.layers))
-
-        for path in src_config_info.layers:
-            import os, os.path
-            if os.path.exists(path):
-                branch = bb.process.run('cd %s; git branch | grep "^* " | tr -d "* "' % path)[0]
-                if branch.startswith("fatal:"):
-                    branch = "(unknown)"
-                if branch:
-                    branch = branch.strip('\n')
-                    vars.append(self.set_vars("Branch:", branch))
-                break
-
-        self.set_config_model(vars)
-
-    def reset(self):
-        self.set_model(None)
-
-#
-# BuildDetailsPage
-#
-
-class BuildDetailsPage (HobPage):
-
-    def __init__(self, builder):
-        super(BuildDetailsPage, self).__init__(builder, "Building ...")
-
-        self.num_of_issues = 0
-        self.endpath = (0,)
-        # create visual elements
-        self.create_visual_elements()
-
-    def create_visual_elements(self):
-        # create visual elements
-        self.vbox = gtk.VBox(False, 12)
-
-        self.progress_box = gtk.VBox(False, 12)
-        self.task_status = gtk.Label("\n") # to ensure layout is correct
-        self.task_status.set_alignment(0.0, 0.5)
-        self.progress_box.pack_start(self.task_status, expand=False, fill=False)
-        self.progress_hbox = gtk.HBox(False, 6)
-        self.progress_box.pack_end(self.progress_hbox, expand=True, fill=True)
-        self.progress_bar = HobProgressBar()
-        self.progress_hbox.pack_start(self.progress_bar, expand=True, fill=True)
-        self.stop_button = HobAltButton("Stop")
-        self.stop_button.connect("clicked", self.stop_button_clicked_cb)
-        self.stop_button.set_sensitive(False)
-        self.progress_hbox.pack_end(self.stop_button, expand=False, fill=False)
-
-        self.notebook = HobNotebook()
-        self.config_tv = BuildConfigurationTreeView()
-        self.scrolled_view_config = gtk.ScrolledWindow ()
-        self.scrolled_view_config.set_policy(gtk.POLICY_NEVER, gtk.POLICY_ALWAYS)
-        self.scrolled_view_config.add(self.config_tv)
-        self.notebook.append_page(self.scrolled_view_config, "Build configuration")
-
-        self.failure_tv = BuildFailureTreeView()
-        self.failure_model = self.builder.handler.build.model.failure_model()
-        self.failure_tv.set_model(self.failure_model)
-        self.scrolled_view_failure = gtk.ScrolledWindow ()
-        self.scrolled_view_failure.set_policy(gtk.POLICY_NEVER, gtk.POLICY_ALWAYS)
-        self.scrolled_view_failure.add(self.failure_tv)
-        self.notebook.append_page(self.scrolled_view_failure, "Issues")
-
-        self.build_tv = RunningBuildTreeView(readonly=True, hob=True)
-        self.build_tv.set_model(self.builder.handler.build.model)
-        self.scrolled_view_build = gtk.ScrolledWindow ()
-        self.scrolled_view_build.set_policy(gtk.POLICY_NEVER, gtk.POLICY_ALWAYS)
-        self.scrolled_view_build.add(self.build_tv)
-        self.notebook.append_page(self.scrolled_view_build, "Log")
-
-        self.builder.handler.build.model.connect_after("row-changed", self.scroll_to_present_row, self.scrolled_view_build.get_vadjustment(), self.build_tv)
-
-        self.button_box = gtk.HBox(False, 6)
-        self.back_button = HobAltButton('&lt;&lt; Back')
-        self.back_button.connect("clicked", self.back_button_clicked_cb)
-        self.button_box.pack_start(self.back_button, expand=False, fill=False)
-
-    def update_build_status(self, current, total, task):
-        recipe_path, recipe_task = task.split(", ")
-        recipe = os.path.basename(recipe_path).rstrip(".bb")
-        tsk_msg = "<b>Running task %s of %s:</b> %s\n<b>Recipe:</b> %s" % (current, total, recipe_task, recipe)
-        self.task_status.set_markup(tsk_msg)
-        self.stop_button.set_sensitive(True)
-
-    def reset_build_status(self):
-        self.task_status.set_markup("\n") # to ensure layout is correct
-        self.endpath = (0,)
-
-    def show_issues(self):
-        self.num_of_issues += 1
-        self.notebook.show_indicator_icon("Issues", self.num_of_issues)
-
-    def reset_issues(self):
-        self.num_of_issues = 0
-        self.notebook.hide_indicator_icon("Issues")
-
-    def _remove_all_widget(self):
-        children = self.vbox.get_children() or []
-        for child in children:
-            self.vbox.remove(child)
-        children = self.box_group_area.get_children() or []
-        for child in children:
-            self.box_group_area.remove(child)
-        children = self.get_children() or []
-        for child in children:
-            self.remove(child)
-
-    def add_build_fail_top_bar(self, actions, log_file=None):
-        primary_action = "Edit %s" % actions
-
-        color = HobColors.ERROR
-        build_fail_top = gtk.EventBox()
-        #build_fail_top.set_size_request(-1, 200)
-        build_fail_top.modify_bg(gtk.STATE_NORMAL, gtk.gdk.color_parse(color))
-
-        build_fail_tab = gtk.Table(14, 46, True)
-        build_fail_top.add(build_fail_tab)
-
-        icon = gtk.Image()
-        icon_pix_buffer = gtk.gdk.pixbuf_new_from_file(hic.ICON_INDI_ERROR_FILE)
-        icon.set_from_pixbuf(icon_pix_buffer)
-        build_fail_tab.attach(icon, 1, 4, 0, 6)
-
-        label = gtk.Label()
-        label.set_alignment(0.0, 0.5)
-        label.set_markup("<span size='x-large'><b>%s</b></span>" % self.title)
-        build_fail_tab.attach(label, 4, 26, 0, 6)
-
-        label = gtk.Label()
-        label.set_alignment(0.0, 0.5)
-        # Ensure variable disk_full is defined
-        if not hasattr(self.builder, 'disk_full'):
-            self.builder.disk_full = False
-
-        if self.builder.disk_full:
-            markup = "<span size='medium'>There is no disk space left, so Hob cannot finish building your image. Free up some disk space\n"
-            markup += "and restart the build. Check the \"Issues\" tab for more details</span>"
-            label.set_markup(markup)
-        else:
-            label.set_markup("<span size='medium'>Check the \"Issues\" information for more details</span>")
-        build_fail_tab.attach(label, 4, 40, 4, 9)
-
-        # create button 'Edit packages'
-        action_button = HobButton(primary_action)
-        #action_button.set_size_request(-1, 40)
-        action_button.set_tooltip_text("Edit the %s parameters" % actions)
-        action_button.connect('clicked', self.failure_primary_action_button_clicked_cb, primary_action)
-
-        if log_file:
-            open_log_button = HobAltButton("Open log")
-            open_log_button.set_relief(gtk.RELIEF_HALF)
-            open_log_button.set_tooltip_text("Open the build's log file")
-            open_log_button.connect('clicked', self.open_log_button_clicked_cb, log_file)
-
-        attach_pos = (24 if log_file else 14)
-        file_bug_button = HobAltButton('File a bug')
-        file_bug_button.set_relief(gtk.RELIEF_HALF)
-        file_bug_button.set_tooltip_text("Open the Yocto Project bug tracking website")
-        file_bug_button.connect('clicked', self.failure_activate_file_bug_link_cb)
-
-        if not self.builder.disk_full:
-            build_fail_tab.attach(action_button, 4, 13, 9, 12)
-            if log_file:
-                build_fail_tab.attach(open_log_button, 14, 23, 9, 12)
-            build_fail_tab.attach(file_bug_button, attach_pos, attach_pos + 9, 9, 12)
-
-        else:
-            restart_build = HobButton("Restart the build")
-            restart_build.set_tooltip_text("Restart the build")
-            restart_build.connect('clicked', self.restart_build_button_clicked_cb)
-
-            build_fail_tab.attach(restart_build, 4, 13, 9, 12)
-            build_fail_tab.attach(action_button, 14, 23, 9, 12)
-            if log_file:
-                build_fail_tab.attach(open_log_button, attach_pos, attach_pos + 9, 9, 12)
-
-        self.builder.disk_full = False
-        return build_fail_top
-
-    def show_fail_page(self, title):
-        self._remove_all_widget()
-        self.title = "Hob cannot build your %s" % title
-
-        self.build_fail_bar = self.add_build_fail_top_bar(title, self.builder.current_logfile)
-
-        self.pack_start(self.group_align, expand=True, fill=True)
-        self.box_group_area.pack_start(self.build_fail_bar, expand=False, fill=False)
-        self.box_group_area.pack_start(self.vbox, expand=True, fill=True)
-
-        self.vbox.pack_start(self.notebook, expand=True, fill=True)
-        self.show_all()
-        self.notebook.set_page("Issues")
-        self.back_button.hide()
-
-    def add_build_stop_top_bar(self, action, log_file=None):
-        color = HobColors.LIGHT_GRAY
-        build_stop_top = gtk.EventBox()
-        #build_stop_top.set_size_request(-1, 200)
-        build_stop_top.modify_bg(gtk.STATE_NORMAL, gtk.gdk.color_parse(color))
-        build_stop_top.set_flags(gtk.CAN_DEFAULT)
-        build_stop_top.grab_default()
-
-        build_stop_tab = gtk.Table(11, 46, True)
-        build_stop_top.add(build_stop_tab)
-
-        icon = gtk.Image()
-        icon_pix_buffer = gtk.gdk.pixbuf_new_from_file(hic.ICON_INFO_HOVER_FILE)
-        icon.set_from_pixbuf(icon_pix_buffer)
-        build_stop_tab.attach(icon, 1, 4, 0, 6)
-
-        label = gtk.Label()
-        label.set_alignment(0.0, 0.5)
-        label.set_markup("<span size='x-large'><b>%s</b></span>" % self.title)
-        build_stop_tab.attach(label, 4, 26, 0, 6)
-
-        action_button = HobButton("Edit %s" % action)
-        action_button.set_size_request(-1, 40)
-        if action == "image":
-            action_button.set_tooltip_text("Edit the image parameters")
-        elif action == "recipes":
-            action_button.set_tooltip_text("Edit the included recipes")
-        elif action == "packages":
-            action_button.set_tooltip_text("Edit the included packages")
-        action_button.connect('clicked', self.stop_primary_action_button_clicked_cb, action)
-        build_stop_tab.attach(action_button, 4, 13, 6, 9)
-
-        if log_file:
-            open_log_button = HobAltButton("Open log")
-            open_log_button.set_relief(gtk.RELIEF_HALF)
-            open_log_button.set_tooltip_text("Open the build's log file")
-            open_log_button.connect('clicked', self.open_log_button_clicked_cb, log_file)
-            build_stop_tab.attach(open_log_button, 14, 23, 6, 9)
-
-        attach_pos = (24 if log_file else 14)
-        build_button = HobAltButton("Build new image")
-        #build_button.set_size_request(-1, 40)
-        build_button.set_tooltip_text("Create a new image from scratch")
-        build_button.connect('clicked', self.new_image_button_clicked_cb)
-        build_stop_tab.attach(build_button, attach_pos, attach_pos + 9, 6, 9)
-
-        return build_stop_top, action_button
-
-    def show_stop_page(self, action):
-        self._remove_all_widget()
-        self.title = "Build stopped"
-        self.build_stop_bar, action_button = self.add_build_stop_top_bar(action, self.builder.current_logfile)
-
-        self.pack_start(self.group_align, expand=True, fill=True)
-        self.box_group_area.pack_start(self.build_stop_bar, expand=False, fill=False)
-        self.box_group_area.pack_start(self.vbox, expand=True, fill=True)
-
-        self.vbox.pack_start(self.notebook, expand=True, fill=True)
-        self.show_all()
-        self.back_button.hide()
-        return action_button
-
-    def show_page(self, step):
-        self._remove_all_widget()
-        if step == self.builder.PACKAGE_GENERATING or step == self.builder.FAST_IMAGE_GENERATING:
-            self.title = "Building packages ..."
-        else:
-            self.title = "Building image ..."
-        self.build_details_top = self.add_onto_top_bar(None)
-        self.pack_start(self.build_details_top, expand=False, fill=False)
-        self.pack_start(self.group_align, expand=True, fill=True)
-
-        self.box_group_area.pack_start(self.vbox, expand=True, fill=True)
-
-        self.progress_bar.reset()
-        self.config_tv.reset()
-        self.vbox.pack_start(self.progress_box, expand=False, fill=False)
-
-        self.vbox.pack_start(self.notebook, expand=True, fill=True)
-
-        self.box_group_area.pack_end(self.button_box, expand=False, fill=False)
-        self.show_all()
-        self.notebook.set_page("Log")
-        self.back_button.hide()
-
-        self.reset_build_status()
-        self.reset_issues()
-
-    def update_progress_bar(self, title, fraction, status=None):
-        self.progress_bar.update(fraction)
-        self.progress_bar.set_title(title)
-        self.progress_bar.set_rcstyle(status)
-
-    def back_button_clicked_cb(self, button):
-        self.builder.show_configuration()
-
-    def new_image_button_clicked_cb(self, button):
-        self.builder.reset()
-
-    def show_back_button(self):
-        self.back_button.show()
-
-    def stop_button_clicked_cb(self, button):
-        self.builder.stop_build()
-
-    def hide_stop_button(self):
-        self.stop_button.set_sensitive(False)
-        self.stop_button.hide()
-
-    def scroll_to_present_row(self, model, path, iter, v_adj, treeview):
-        if treeview and v_adj:
-            if path[0] > self.endpath[0]: # check the event is a new row append or not
-                self.endpath = path
-                # check the gtk.adjustment position is at end boundary or not
-                if (v_adj.upper <= v_adj.page_size) or (v_adj.value == v_adj.upper - v_adj.page_size):
-                    treeview.scroll_to_cell(path)
-
-    def show_configurations(self, configurations, params):
-        self.config_tv.show(configurations, params)
-
-    def failure_primary_action_button_clicked_cb(self, button, action):
-        if "Edit recipes" in action:
-            self.builder.show_recipes()
-        elif "Edit packages" in action:
-            self.builder.show_packages()
-        elif "Edit image" in action:
-            self.builder.show_configuration()
-
-    def restart_build_button_clicked_cb(self, button):
-        self.builder.just_bake()
-
-    def stop_primary_action_button_clicked_cb(self, button, action):
-        if "recipes" in action:
-            self.builder.show_recipes()
-        elif "packages" in action:
-            self.builder.show_packages(ask=False)
-        elif "image" in action:
-            self.builder.show_configuration()
-
-    def open_log_button_clicked_cb(self, button, log_file):
-        if log_file:
-            log_file = "file:///" + log_file
-            gtk.show_uri(screen=button.get_screen(), uri=log_file, timestamp=0)
-
-    def failure_activate_file_bug_link_cb(self, button):
-        button.child.emit('activate-link', "http://bugzilla.yoctoproject.org")

bitbake/lib/bb/ui/crumbs/configurator.py

@@ -0,0 +1,319 @@
+#
+# BitBake Graphical GTK User Interface
+#
+# Copyright (C) 2011        Intel Corporation
+#
+# Authored by Joshua Lock <josh@linux.intel.com>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+
+import gobject
+import copy
+import re, os
+from bb import data
+
+class Configurator(gobject.GObject):
+
+    """
+    A GObject to handle writing modified configuration values back
+    to conf files.
+    """
+    __gsignals__ = {
+        "layers-loaded"  : (gobject.SIGNAL_RUN_LAST,
+                           gobject.TYPE_NONE,
+                           ()),
+        "layers-changed" : (gobject.SIGNAL_RUN_LAST,
+                            gobject.TYPE_NONE,
+                            ())
+    }
+
+    def __init__(self):
+        gobject.GObject.__init__(self)
+        self.local = None
+        self.bblayers = None
+        self.enabled_layers = {}
+        self.loaded_layers = {}
+        self.config = {}
+        self.orig_config = {}
+
+    # NOTE: cribbed from the cooker...
+    def _parse(self, f, data, include=False):
+        try:
+            return bb.parse.handle(f, data, include)
+        except (IOError, bb.parse.ParseError) as exc:
+            parselog.critical("Unable to parse %s: %s" % (f, exc))
+            sys.exit(1)
+
+    def _loadLocalConf(self, path):
+        def getString(var):
+            return bb.data.getVar(var, data, True) or ""
+
+        self.local = path
+
+        if self.orig_config:
+            del self.orig_config
+            self.orig_config = {}
+
+        data = bb.data.init()
+        data = self._parse(self.local, data)
+
+        # We only need to care about certain variables
+        mach = getString('MACHINE')
+        if mach and mach != self.config.get('MACHINE', ''):
+            self.config['MACHINE'] = mach
+        sdkmach = getString('SDKMACHINE')
+        if sdkmach and sdkmach != self.config.get('SDKMACHINE', ''):
+            self.config['SDKMACHINE'] = sdkmach
+        distro = getString('DISTRO')
+        if distro and distro != self.config.get('DISTRO', ''):
+            self.config['DISTRO'] = distro
+        bbnum = getString('BB_NUMBER_THREADS')
+        if bbnum and bbnum != self.config.get('BB_NUMBER_THREADS', ''):
+            self.config['BB_NUMBER_THREADS'] = bbnum
+        pmake = getString('PARALLEL_MAKE')
+        if pmake and pmake != self.config.get('PARALLEL_MAKE', ''):
+            self.config['PARALLEL_MAKE'] = pmake
+        pclass = getString('PACKAGE_CLASSES')
+        if pclass and pclass != self.config.get('PACKAGE_CLASSES', ''):
+            self.config['PACKAGE_CLASSES'] = pclass
+        fstypes = getString('IMAGE_FSTYPES')
+        if fstypes and fstypes != self.config.get('IMAGE_FSTYPES', ''):
+            self.config['IMAGE_FSTYPES'] = fstypes
+
+        # Values which aren't always set in the conf must be explicitly
+        # loaded as empty values for save to work
+        incompat = getString('INCOMPATIBLE_LICENSE')
+        if incompat and incompat != self.config.get('INCOMPATIBLE_LICENSE', ''):
+            self.config['INCOMPATIBLE_LICENSE'] = incompat
+        else:
+            self.config['INCOMPATIBLE_LICENSE'] = ""
+
+        # Non-standard, namespaces, variables for GUI preferences
+        toolchain = getString('HOB_BUILD_TOOLCHAIN')
+        if toolchain and toolchain != self.config.get('HOB_BUILD_TOOLCHAIN', ''):
+            self.config['HOB_BUILD_TOOLCHAIN'] = toolchain
+        header = getString('HOB_BUILD_TOOLCHAIN_HEADERS')
+        if header and header != self.config.get('HOB_BUILD_TOOLCHAIN_HEADERS', ''):
+            self.config['HOB_BUILD_TOOLCHAIN_HEADERS'] = header
+
+        self.orig_config = copy.deepcopy(self.config)
+
+    def setLocalConfVar(self, var, val):
+        self.config[var] = val
+
+    def getLocalConfVar(self, var):
+        if var in self.config:
+            return self.config[var]
+        else:
+            return ""
+
+    def _loadLayerConf(self, path):
+        self.bblayers = path
+        self.enabled_layers = {}
+        self.loaded_layers = {}
+        data = bb.data.init()
+        data = self._parse(self.bblayers, data)
+        layers = (bb.data.getVar('BBLAYERS', data, True) or "").split()
+        for layer in layers:
+            # TODO: we may be better off calling the layer by its
+            # BBFILE_COLLECTIONS value?
+            name = self._getLayerName(layer)
+            self.loaded_layers[name] = layer
+
+        self.enabled_layers = copy.deepcopy(self.loaded_layers)
+        self.emit("layers-loaded")
+
+    def _addConfigFile(self, path):
+        pref, sep, filename = path.rpartition("/")
+        if filename == "local.conf" or filename == "hob.local.conf":
+            self._loadLocalConf(path)
+        elif filename == "bblayers.conf":
+            self._loadLayerConf(path)
+
+    def _splitLayer(self, path):
+        # we only care about the path up to /conf/layer.conf
+        layerpath, conf, end = path.rpartition("/conf/")
+        return layerpath
+
+    def _getLayerName(self, path):
+        # Should this be the collection name?
+        layerpath, sep, name = path.rpartition("/")
+        return name
+
+    def disableLayer(self, layer):
+        if layer in self.enabled_layers:
+            del self.enabled_layers[layer]
+
+    def addLayerConf(self, confpath):
+        layerpath = self._splitLayer(confpath)
+        name = self._getLayerName(layerpath)
+        if name not in self.enabled_layers:
+            self.addLayer(name, layerpath)
+            return name, layerpath
+        else:
+            return None, None
+
+    def addLayer(self, name, path):
+        self.enabled_layers[name] = path
+
+    def _isLayerConfDirty(self):
+        # if a different number of layers enabled to what was
+        # loaded, definitely different
+        if len(self.enabled_layers) != len(self.loaded_layers):
+            return True
+
+        for layer in self.loaded_layers:
+            # if layer loaded but no longer present, definitely dirty
+            if layer not in self.enabled_layers:
+                return True
+
+        for layer in self.enabled_layers:
+            # if this layer wasn't present at load, definitely dirty
+            if layer not in self.loaded_layers:
+                return True
+            # if this layers path has changed, definitely dirty
+            if self.enabled_layers[layer] != self.loaded_layers[layer]:
+                return True
+
+        return False
+
+    def _constructLayerEntry(self):
+        """
+        Returns a string representing the new layer selection
+        """
+        layers = self.enabled_layers.copy()
+        # Construct BBLAYERS entry
+        layer_entry = "BBLAYERS = \" \\\n"
+        if 'meta' in layers:
+            layer_entry = layer_entry + "  %s \\\n" % layers['meta']
+            del layers['meta']
+        for layer in layers:
+            layer_entry = layer_entry + "  %s \\\n" % layers[layer]
+        layer_entry = layer_entry + "  \""
+
+        return "".join(layer_entry)
+
+    def writeLocalConf(self):
+        # Dictionary containing only new or modified variables
+        changed_values = {}
+        for var in self.config:
+            val = self.config[var]
+            if self.orig_config.get(var, None) != val:
+                changed_values[var] = val
+
+        if not len(changed_values):
+            return
+
+        # Create a backup of the local.conf
+        bkup = "%s~" % self.local
+        os.rename(self.local, bkup)
+
+        # read the original conf into a list
+        with open(bkup, 'r') as config:
+            config_lines = config.readlines()
+
+        new_config_lines = ["\n"]
+        for var in changed_values:
+            # Convenience function for re.subn(). If the pattern matches
+            # return a string which contains an assignment using the same
+            # assignment operator as the old assignment.
+            def replace_val(matchobj):
+                var = matchobj.group(1) # config variable
+                op = matchobj.group(2) # assignment operator
+                val = changed_values[var] # new config value
+                return "%s %s \"%s\"" % (var, op, val)
+
+            pattern = '^\s*(%s)\s*([+=?.]+)(.*)' % re.escape(var)
+            p = re.compile(pattern)
+            cnt = 0
+            replaced = False
+
+            # Iterate over the local.conf lines and if they are a match
+            # for the pattern comment out the line and append a new line
+            # with the new VAR op "value" entry
+            for line in config_lines:
+                new_line, replacements = p.subn(replace_val, line)
+                if replacements:
+                    config_lines[cnt] = "#%s" % line
+                    new_config_lines.append(new_line)
+                    replaced = True
+                cnt = cnt + 1
+
+            if not replaced:
+                new_config_lines.append("%s = \"%s\"\n" % (var, changed_values[var]))
+
+        # Add the modified variables
+        config_lines.extend(new_config_lines)
+
+        # Write the updated lines list object to the local.conf
+        with open(self.local, "w") as n:
+            n.write("".join(config_lines))
+
+        del self.orig_config
+        self.orig_config = copy.deepcopy(self.config)
+
+    def insertTempBBPath(self, bbpath, bbfiles):
+        # Create a backup of the local.conf
+        bkup = "%s~" % self.local
+        os.rename(self.local, bkup)
+
+        # read the original conf into a list
+        with open(bkup, 'r') as config:
+            config_lines = config.readlines()
+
+        if bbpath:
+            config_lines.append("BBPATH := \"${BBPATH}:%s\"\n" % bbpath)
+        if bbfiles:
+            config_lines.append("BBFILES := \"${BBFILES} %s\"\n" % bbfiles)
+
+        # Write the updated lines list object to the local.conf
+        with open(self.local, "w") as n:
+            n.write("".join(config_lines))
+
+    def writeLayerConf(self):
+        # If we've not added/removed new layers don't write
+        if not self._isLayerConfDirty():
+            return
+
+        # This pattern should find the existing BBLAYERS
+        pattern = 'BBLAYERS\s=\s\".*\"'
+
+        # Backup the users bblayers.conf
+        bkup = "%s~" % self.bblayers
+        os.rename(self.bblayers, bkup)
+
+        replacement = self._constructLayerEntry()
+
+        with open(bkup, "r") as f:
+            contents = f.read()
+            p = re.compile(pattern, re.DOTALL)
+            new = p.sub(replacement, contents)
+
+        with open(self.bblayers, "w") as n:
+            n.write(new)
+
+        # At some stage we should remove the backup we've created
+        # though we should probably verify it first
+        #os.remove(bkup)
+
+        # set loaded_layers for dirtiness tracking
+        self.loaded_layers = copy.deepcopy(self.enabled_layers)
+
+        self.emit("layers-changed")
+
+    def configFound(self, handler, path):
+        self._addConfigFile(path)
+
+    def loadConfig(self, path):
+        self._addConfigFile(path)

bitbake/lib/bb/ui/crumbs/hig.py

@@ -0,0 +1,61 @@
+#
+# BitBake Graphical GTK User Interface
+#
+# Copyright (C) 2011        Intel Corporation
+#
+# Authored by Joshua Lock <josh@linux.intel.com>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+
+import gobject
+import gtk
+"""
+The following are convenience classes for implementing GNOME HIG compliant
+BitBake GUI's
+In summary: spacing = 12px, border-width = 6px
+"""
+
+class CrumbsDialog(gtk.Dialog):
+    """
+    A GNOME HIG compliant dialog widget.
+    Add buttons with gtk.Dialog.add_button or gtk.Dialog.add_buttons
+    """
+    def __init__(self, parent=None, label="", icon=gtk.STOCK_INFO):
+        gtk.Dialog.__init__(self, "", parent, gtk.DIALOG_DESTROY_WITH_PARENT)
+        
+        #self.set_property("has-separator", False) # note: deprecated in 2.22
+
+        self.set_border_width(6)
+        self.vbox.set_property("spacing", 12)
+        self.action_area.set_property("spacing", 12)
+        self.action_area.set_property("border-width", 6)
+
+        first_row = gtk.HBox(spacing=12)
+        first_row.set_property("border-width", 6)
+        first_row.show()
+        self.vbox.add(first_row)
+
+        self.icon = gtk.Image()
+        self.icon.set_from_stock(icon, gtk.ICON_SIZE_DIALOG)
+        self.icon.set_property("yalign", 0.00)
+        self.icon.show()
+        first_row.add(self.icon)
+
+        self.label = gtk.Label()
+        self.label.set_use_markup(True)
+        self.label.set_line_wrap(True)
+        self.label.set_markup(label)
+        self.label.set_property("yalign", 0.00)
+        self.label.show()
+        first_row.add(self.label)

bitbake/lib/bb/ui/crumbs/hig/advancedsettingsdialog.py

@@ -1,336 +0,0 @@
-#
-# BitBake Graphical GTK User Interface
-#
-# Copyright (C) 2011-2012   Intel Corporation
-#
-# Authored by Joshua Lock <josh@linux.intel.com>
-# Authored by Dongxiao Xu <dongxiao.xu@intel.com>
-# Authored by Shane Wang <shane.wang@intel.com>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-import gtk
-import hashlib
-from bb.ui.crumbs.hobwidget import HobInfoButton, HobButton
-from bb.ui.crumbs.progressbar import HobProgressBar
-from bb.ui.crumbs.hig.settingsuihelper import SettingsUIHelper
-from bb.ui.crumbs.hig.crumbsdialog import CrumbsDialog
-from bb.ui.crumbs.hig.crumbsmessagedialog import CrumbsMessageDialog
-from bb.ui.crumbs.hig.proxydetailsdialog import ProxyDetailsDialog
-
-"""
-The following are convenience classes for implementing GNOME HIG compliant
-BitBake GUI's
-In summary: spacing = 12px, border-width = 6px
-"""
-
-class AdvancedSettingsDialog (CrumbsDialog, SettingsUIHelper):
-    
-    def details_cb(self, button, parent, protocol):
-        dialog = ProxyDetailsDialog(title = protocol.upper() + " Proxy Details",
-            user = self.configuration.proxies[protocol][1],
-            passwd = self.configuration.proxies[protocol][2],
-            parent = parent,
-            flags = gtk.DIALOG_MODAL
-                    | gtk.DIALOG_DESTROY_WITH_PARENT
-                    | gtk.DIALOG_NO_SEPARATOR)
-        dialog.add_button(gtk.STOCK_CLOSE, gtk.RESPONSE_OK)
-        response = dialog.run()
-        if response == gtk.RESPONSE_OK:
-            self.configuration.proxies[protocol][1] = dialog.user
-            self.configuration.proxies[protocol][2] = dialog.passwd
-            self.refresh_proxy_components()
-        dialog.destroy()
-
-    def set_save_button(self, button):
-        self.save_button = button
-
-    def rootfs_combo_changed_cb(self, rootfs_combo, all_package_format, check_hbox):
-        combo_item = self.rootfs_combo.get_active_text()
-        modified = False
-        for child in check_hbox.get_children():
-            if isinstance(child, gtk.CheckButton):
-                check_hbox.remove(child)
-                modified = True
-        for format in all_package_format:
-            if format != combo_item:
-                check_button = gtk.CheckButton(format)
-                check_hbox.pack_start(check_button, expand=False, fill=False)
-                modified = True
-        if modified:
-            check_hbox.remove(self.pkgfmt_info)
-            check_hbox.pack_start(self.pkgfmt_info, expand=False, fill=False)
-        check_hbox.show_all()
-
-    def gen_pkgfmt_widget(self, curr_package_format, all_package_format, tooltip_combo="", tooltip_extra=""):
-        pkgfmt_vbox = gtk.VBox(False, 6)
-
-        label = self.gen_label_widget("Root file system package format")
-        pkgfmt_vbox.pack_start(label, expand=False, fill=False)
-
-        rootfs_format = ""
-        if curr_package_format:
-            rootfs_format = curr_package_format.split()[0]
-
-        rootfs_format_widget, rootfs_combo = self.gen_combo_widget(rootfs_format, all_package_format, tooltip_combo)
-        pkgfmt_vbox.pack_start(rootfs_format_widget, expand=False, fill=False)
-
-        label = self.gen_label_widget("Additional package formats")
-        pkgfmt_vbox.pack_start(label, expand=False, fill=False)
-
-        check_hbox = gtk.HBox(False, 12)
-        pkgfmt_vbox.pack_start(check_hbox, expand=False, fill=False)
-        for format in all_package_format:
-            if format != rootfs_format:
-                check_button = gtk.CheckButton(format)
-                is_active = (format in curr_package_format.split())
-                check_button.set_active(is_active)
-                check_hbox.pack_start(check_button, expand=False, fill=False)
-
-        self.pkgfmt_info = HobInfoButton(tooltip_extra, self)
-        check_hbox.pack_start(self.pkgfmt_info, expand=False, fill=False)
-
-        rootfs_combo.connect("changed", self.rootfs_combo_changed_cb, all_package_format, check_hbox)
-
-        pkgfmt_vbox.show_all()
-
-        return pkgfmt_vbox, rootfs_combo, check_hbox
-
-    def __init__(self, title, configuration, all_image_types,
-            all_package_formats, all_distros, all_sdk_machines,
-            max_threads, parent, flags, buttons=None):
-        super(AdvancedSettingsDialog, self).__init__(title, parent, flags, buttons)
-
-        # class members from other objects
-        # bitbake settings from Builder.Configuration
-        self.configuration = configuration
-        self.image_types = all_image_types
-        self.all_package_formats = all_package_formats
-        self.all_distros = all_distros[:]
-        self.all_sdk_machines = all_sdk_machines
-        self.max_threads = max_threads
-
-        # class members for internal use
-        self.distro_combo = None
-        self.dldir_text = None
-        self.sstatedir_text = None
-        self.sstatemirror_text = None
-        self.bb_spinner = None
-        self.pmake_spinner = None
-        self.rootfs_size_spinner = None
-        self.extra_size_spinner = None
-        self.gplv3_checkbox = None
-        self.toolchain_checkbox = None
-        self.image_types_checkbuttons = {}
-
-        self.md5 = self.config_md5()
-        self.settings_changed = False
-
-        # create visual elements on the dialog
-        self.save_button = None
-        self.create_visual_elements()
-        self.connect("response", self.response_cb)
-
-    def _get_sorted_value(self, var):
-        return " ".join(sorted(str(var).split())) + "\n"
-
-    def config_md5(self):
-        data = ""
-        data += ("PACKAGE_CLASSES: "      + self.configuration.curr_package_format + '\n')
-        data += ("DISTRO: "               + self._get_sorted_value(self.configuration.curr_distro))
-        data += ("IMAGE_ROOTFS_SIZE: "    + self._get_sorted_value(self.configuration.image_rootfs_size))
-        data += ("IMAGE_EXTRA_SIZE: "     + self._get_sorted_value(self.configuration.image_extra_size))
-        data += ("INCOMPATIBLE_LICENSE: " + self._get_sorted_value(self.configuration.incompat_license))
-        data += ("SDK_MACHINE: "          + self._get_sorted_value(self.configuration.curr_sdk_machine))
-        data += ("TOOLCHAIN_BUILD: "      + self._get_sorted_value(self.configuration.toolchain_build))
-        data += ("IMAGE_FSTYPES: "        + self._get_sorted_value(self.configuration.image_fstypes))
-        return hashlib.md5(data).hexdigest()
-
-    def create_visual_elements(self):
-        self.nb = gtk.Notebook()
-        self.nb.set_show_tabs(True)
-        self.nb.append_page(self.create_image_types_page(), gtk.Label("Image types"))
-        self.nb.append_page(self.create_output_page(), gtk.Label("Output"))
-        self.nb.set_current_page(0)
-        self.vbox.pack_start(self.nb, expand=True, fill=True)
-        self.vbox.pack_end(gtk.HSeparator(), expand=True, fill=True)
-
-        self.show_all()
-
-    def get_num_checked_image_types(self):
-        total = 0
-        for b in self.image_types_checkbuttons.values():
-            if b.get_active():
-              total = total + 1
-        return total
-
-    def set_save_button_state(self):
-        if self.save_button:
-            self.save_button.set_sensitive(self.get_num_checked_image_types() > 0)
-
-    def image_type_checkbutton_clicked_cb(self, button):
-        self.set_save_button_state()
-        if self.get_num_checked_image_types() == 0:
-            # Show an error dialog
-            lbl = "<b>Select an image type</b>\n\nYou need to select at least one image type."
-            dialog = CrumbsMessageDialog(self, lbl, gtk.STOCK_DIALOG_WARNING)
-            button = dialog.add_button("OK", gtk.RESPONSE_OK)
-            HobButton.style_button(button)
-            response = dialog.run()
-            dialog.destroy()
-
-    def create_image_types_page(self):
-        main_vbox = gtk.VBox(False, 16)
-        main_vbox.set_border_width(6)
-
-        advanced_vbox = gtk.VBox(False, 6)
-        advanced_vbox.set_border_width(6)
-
-        distro_vbox = gtk.VBox(False, 6)        
-        label = self.gen_label_widget("Distro:")
-        tooltip = "Selects the Yocto Project distribution you want"
-        try:
-            i = self.all_distros.index( "defaultsetup" )
-        except ValueError:
-            i = -1
-        if i != -1:
-            self.all_distros[ i ] = "Default"
-            if self.configuration.curr_distro == "defaultsetup":
-                self.configuration.curr_distro = "Default"
-        distro_widget, self.distro_combo = self.gen_combo_widget(self.configuration.curr_distro, self.all_distros,"<b>Distro</b>" + "*" + tooltip)
-        distro_vbox.pack_start(label, expand=False, fill=False)
-        distro_vbox.pack_start(distro_widget, expand=False, fill=False)
-        main_vbox.pack_start(distro_vbox, expand=False, fill=False)
-
-
-        rows = (len(self.image_types)+1)/3
-        table = gtk.Table(rows + 1, 10, True)
-        advanced_vbox.pack_start(table, expand=False, fill=False)
-
-        tooltip = "Image file system types you want."
-        info = HobInfoButton("<b>Image types</b>" + "*" + tooltip, self)
-        label = self.gen_label_widget("Image types:")
-        align = gtk.Alignment(0, 0.5, 0, 0)
-        table.attach(align, 0, 4, 0, 1)
-        align.add(label)
-        table.attach(info, 4, 5, 0, 1)
-
-        i = 1
-        j = 1
-        for image_type in sorted(self.image_types):
-            self.image_types_checkbuttons[image_type] = gtk.CheckButton(image_type)
-            self.image_types_checkbuttons[image_type].connect("toggled", self.image_type_checkbutton_clicked_cb)
-            article = ""
-            if image_type.startswith(("a", "e", "i", "o", "u")):
-                article = "n"
-            self.image_types_checkbuttons[image_type].set_tooltip_text("Build a%s %s image" % (article, image_type))
-            table.attach(self.image_types_checkbuttons[image_type], j - 1, j + 3, i, i + 1)
-            if image_type in self.configuration.image_fstypes.split():
-                self.image_types_checkbuttons[image_type].set_active(True)
-            i += 1
-            if i > rows:
-                i = 1
-                j = j + 4
-
-        main_vbox.pack_start(advanced_vbox, expand=False, fill=False)
-        self.set_save_button_state()
-        
-        return main_vbox
-
-    def create_output_page(self):
-        advanced_vbox = gtk.VBox(False, 6)
-        advanced_vbox.set_border_width(6)
-
-        advanced_vbox.pack_start(self.gen_label_widget('<span weight="bold">Package format</span>'), expand=False, fill=False)
-        sub_vbox = gtk.VBox(False, 6)
-        advanced_vbox.pack_start(sub_vbox, expand=False, fill=False)
-        tooltip_combo = "Selects the package format used to generate rootfs."
-        tooltip_extra = "Selects extra package formats to build"
-        pkgfmt_widget, self.rootfs_combo, self.check_hbox = self.gen_pkgfmt_widget(self.configuration.curr_package_format, self.all_package_formats,"<b>Root file system package format</b>" + "*" + tooltip_combo,"<b>Additional package formats</b>" + "*" + tooltip_extra)
-        sub_vbox.pack_start(pkgfmt_widget, expand=False, fill=False)
-
-        advanced_vbox.pack_start(self.gen_label_widget('<span weight="bold">Image size</span>'), expand=False, fill=False)
-        sub_vbox = gtk.VBox(False, 6)
-        advanced_vbox.pack_start(sub_vbox, expand=False, fill=False)
-        label = self.gen_label_widget("Image basic size (in MB)")
-        tooltip = "Sets the basic size of your target image.\nThis is the basic size of your target image unless your selected package size exceeds this value or you select \'Image Extra Size\'."
-        rootfs_size_widget, self.rootfs_size_spinner = self.gen_spinner_widget(int(self.configuration.image_rootfs_size*1.0/1024), 0, 65536,"<b>Image basic size</b>" + "*" + tooltip)
-        sub_vbox.pack_start(label, expand=False, fill=False)
-        sub_vbox.pack_start(rootfs_size_widget, expand=False, fill=False)
-
-        sub_vbox = gtk.VBox(False, 6)
-        advanced_vbox.pack_start(sub_vbox, expand=False, fill=False)
-        label = self.gen_label_widget("Additional free space (in MB)")
-        tooltip = "Sets the extra free space of your target image.\nBy default, the system reserves 30% of your image size as free space. If your image contains zypper, it brings in 50MB more space. The maximum free space is 64GB."
-        extra_size_widget, self.extra_size_spinner = self.gen_spinner_widget(int(self.configuration.image_extra_size*1.0/1024), 0, 65536,"<b>Additional free space</b>" + "*" + tooltip)
-        sub_vbox.pack_start(label, expand=False, fill=False)
-        sub_vbox.pack_start(extra_size_widget, expand=False, fill=False)
-
-        advanced_vbox.pack_start(self.gen_label_widget('<span weight="bold">Licensing</span>'), expand=False, fill=False)
-        self.gplv3_checkbox = gtk.CheckButton("Exclude GPLv3 packages")
-        self.gplv3_checkbox.set_tooltip_text("Check this box to prevent GPLv3 packages from being included in your image")
-        if "GPLv3" in self.configuration.incompat_license.split():
-            self.gplv3_checkbox.set_active(True)
-        else:
-            self.gplv3_checkbox.set_active(False)
-        advanced_vbox.pack_start(self.gplv3_checkbox, expand=False, fill=False)
-
-        advanced_vbox.pack_start(self.gen_label_widget('<span weight="bold">Toolchain</span>'), expand=False, fill=False)
-        sub_hbox = gtk.HBox(False, 6)
-        advanced_vbox.pack_start(sub_hbox, expand=False, fill=False)
-        self.toolchain_checkbox = gtk.CheckButton("Build toolchain")
-        self.toolchain_checkbox.set_tooltip_text("Check this box to build the related toolchain with your image")
-        self.toolchain_checkbox.set_active(self.configuration.toolchain_build)
-        sub_hbox.pack_start(self.toolchain_checkbox, expand=False, fill=False)
-
-        tooltip = "Selects the host platform for which you want to run the toolchain"
-        sdk_machine_widget, self.sdk_machine_combo = self.gen_combo_widget(self.configuration.curr_sdk_machine, self.all_sdk_machines,"<b>Build toolchain</b>" + "*" + tooltip)
-        sub_hbox.pack_start(sdk_machine_widget, expand=False, fill=False)
-
-        return advanced_vbox
-
-    def response_cb(self, dialog, response_id):
-        package_format = []
-        package_format.append(self.rootfs_combo.get_active_text())
-        for child in self.check_hbox:
-            if isinstance(child, gtk.CheckButton) and child.get_active():
-                package_format.append(child.get_label())
-        self.configuration.curr_package_format = " ".join(package_format)
-
-        distro = self.distro_combo.get_active_text()
-        if distro == "Default":
-            distro = "defaultsetup"
-        self.configuration.curr_distro = distro
-        self.configuration.image_rootfs_size = self.rootfs_size_spinner.get_value_as_int() * 1024
-        self.configuration.image_extra_size = self.extra_size_spinner.get_value_as_int() * 1024
-
-        self.configuration.image_fstypes = ""
-        for image_type in self.image_types:
-            if self.image_types_checkbuttons[image_type].get_active():
-                self.configuration.image_fstypes += (" " + image_type)
-        self.configuration.image_fstypes.strip()
-
-        if self.gplv3_checkbox.get_active():
-            if "GPLv3" not in self.configuration.incompat_license.split():
-                self.configuration.incompat_license += " GPLv3"
-        else:
-            if "GPLv3" in self.configuration.incompat_license.split():
-                self.configuration.incompat_license = self.configuration.incompat_license.split().remove("GPLv3")
-                self.configuration.incompat_license = " ".join(self.configuration.incompat_license or [])
-        self.configuration.incompat_license = self.configuration.incompat_license.strip()
-
-        self.configuration.toolchain_build = self.toolchain_checkbox.get_active()
-        self.configuration.curr_sdk_machine = self.sdk_machine_combo.get_active_text()
-        md5 = self.config_md5()
-        self.settings_changed = (self.md5 != md5)

bitbake/lib/bb/ui/crumbs/hig/crumbsdialog.py

@@ -1,44 +0,0 @@
-#
-# BitBake Graphical GTK User Interface
-#
-# Copyright (C) 2011-2012   Intel Corporation
-#
-# Authored by Joshua Lock <josh@linux.intel.com>
-# Authored by Dongxiao Xu <dongxiao.xu@intel.com>
-# Authored by Shane Wang <shane.wang@intel.com>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-import gtk
-
-"""
-The following are convenience classes for implementing GNOME HIG compliant
-BitBake GUI's
-In summary: spacing = 12px, border-width = 6px
-"""
-
-class CrumbsDialog(gtk.Dialog):
-    """
-    A GNOME HIG compliant dialog widget.
-    Add buttons with gtk.Dialog.add_button or gtk.Dialog.add_buttons
-    """
-    def __init__(self, title="", parent=None, flags=0, buttons=None):
-        super(CrumbsDialog, self).__init__(title, parent, flags, buttons)
-
-        self.set_property("has-separator", False) # note: deprecated in 2.22
-
-        self.set_border_width(6)
-        self.vbox.set_property("spacing", 12)
-        self.action_area.set_property("spacing", 12)
-        self.action_area.set_property("border-width", 6)

bitbake/lib/bb/ui/crumbs/hig/crumbsmessagedialog.py

@@ -1,95 +0,0 @@
-#
-# BitBake Graphical GTK User Interface
-#
-# Copyright (C) 2011-2012   Intel Corporation
-#
-# Authored by Joshua Lock <josh@linux.intel.com>
-# Authored by Dongxiao Xu <dongxiao.xu@intel.com>
-# Authored by Shane Wang <shane.wang@intel.com>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-import glib
-import gtk
-from bb.ui.crumbs.hobwidget import HobIconChecker
-from bb.ui.crumbs.hig.crumbsdialog import CrumbsDialog
-
-"""
-The following are convenience classes for implementing GNOME HIG compliant
-BitBake GUI's
-In summary: spacing = 12px, border-width = 6px
-"""
-
-class CrumbsMessageDialog(CrumbsDialog):
-    """
-    A GNOME HIG compliant dialog widget.
-    Add buttons with gtk.Dialog.add_button or gtk.Dialog.add_buttons
-    """
-    def __init__(self, parent=None, label="", icon=gtk.STOCK_INFO, msg=""):
-        super(CrumbsMessageDialog, self).__init__("", parent, gtk.DIALOG_MODAL)
-
-        self.set_border_width(6)
-        self.vbox.set_property("spacing", 12)
-        self.action_area.set_property("spacing", 12)
-        self.action_area.set_property("border-width", 6)
-
-        first_column = gtk.HBox(spacing=12)
-        first_column.set_property("border-width", 6)
-        first_column.show()
-        self.vbox.add(first_column)
-
-        self.icon = gtk.Image()
-        # We have our own Info icon which should be used in preference of the stock icon
-        self.icon_chk = HobIconChecker()
-        self.icon.set_from_stock(self.icon_chk.check_stock_icon(icon), gtk.ICON_SIZE_DIALOG)
-        self.icon.set_property("yalign", 0.00)
-        self.icon.show()
-        first_column.pack_start(self.icon, expand=False, fill=True, padding=0)
-        
-        if 0 <= len(msg) < 200:
-            lbl = label + "%s" % glib.markup_escape_text(msg)
-            self.label_short = gtk.Label()
-            self.label_short.set_use_markup(True)
-            self.label_short.set_line_wrap(True)
-            self.label_short.set_markup(lbl)
-            self.label_short.set_property("yalign", 0.00)
-            self.label_short.show()
-            first_column.add(self.label_short)
-        else:
-            second_row = gtk.VBox(spacing=12)
-            second_row.set_property("border-width", 6)
-            self.label_long = gtk.Label()
-            self.label_long.set_use_markup(True)
-            self.label_long.set_line_wrap(True)
-            self.label_long.set_markup(label)
-            self.label_long.set_alignment(0.0, 0.0)
-            second_row.pack_start(self.label_long, expand=False, fill=False, padding=0)
-            self.label_long.show()
-            self.textWindow = gtk.ScrolledWindow()
-            self.textWindow.set_shadow_type(gtk.SHADOW_IN)
-            self.textWindow.set_policy(gtk.POLICY_AUTOMATIC, gtk.POLICY_AUTOMATIC)
-            self.msgView = gtk.TextView()
-            self.msgView.set_editable(False)
-            self.msgView.set_wrap_mode(gtk.WRAP_WORD)
-            self.msgView.set_cursor_visible(False)
-            self.msgView.set_size_request(300, 300)
-            self.buf = gtk.TextBuffer()
-            self.buf.set_text(msg)
-            self.msgView.set_buffer(self.buf)
-            self.textWindow.add(self.msgView)
-            self.msgView.show()
-            second_row.add(self.textWindow)
-            self.textWindow.show()
-            first_column.add(second_row)
-            second_row.show()

bitbake/lib/bb/ui/crumbs/hig/deployimagedialog.py

@@ -1,215 +0,0 @@
-#
-# BitBake Graphical GTK User Interface
-#
-# Copyright (C) 2011-2012   Intel Corporation
-#
-# Authored by Joshua Lock <josh@linux.intel.com>
-# Authored by Dongxiao Xu <dongxiao.xu@intel.com>
-# Authored by Shane Wang <shane.wang@intel.com>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-import glob
-import gtk
-import gobject
-import os
-import re
-import shlex
-import subprocess
-import tempfile
-from bb.ui.crumbs.hobwidget import hic, HobButton
-from bb.ui.crumbs.progressbar import HobProgressBar
-import bb.ui.crumbs.utils
-import bb.process
-from bb.ui.crumbs.hig.crumbsdialog import CrumbsDialog
-from bb.ui.crumbs.hig.crumbsmessagedialog import CrumbsMessageDialog
-
-"""
-The following are convenience classes for implementing GNOME HIG compliant
-BitBake GUI's
-In summary: spacing = 12px, border-width = 6px
-"""
-
-class DeployImageDialog (CrumbsDialog):
-
-    __dummy_usb__ = "--select a usb drive--"
-
-    def __init__(self, title, image_path, parent, flags, buttons=None, standalone=False):
-        super(DeployImageDialog, self).__init__(title, parent, flags, buttons)
-
-        self.image_path = image_path
-        self.standalone = standalone
-
-        self.create_visual_elements()
-        self.connect("response", self.response_cb)
-
-    def create_visual_elements(self):
-        self.set_size_request(600, 400)
-        label = gtk.Label()
-        label.set_alignment(0.0, 0.5)
-        markup = "<span font_desc='12'>The image to be written into usb drive:</span>"
-        label.set_markup(markup)
-        self.vbox.pack_start(label, expand=False, fill=False, padding=2)
-
-        table = gtk.Table(2, 10, False)
-        table.set_col_spacings(5)
-        table.set_row_spacings(5)
-        self.vbox.pack_start(table, expand=True, fill=True)
-
-        scroll = gtk.ScrolledWindow()
-        scroll.set_policy(gtk.POLICY_NEVER, gtk.POLICY_AUTOMATIC)
-        scroll.set_shadow_type(gtk.SHADOW_IN)
-        tv = gtk.TextView()
-        tv.set_editable(False)
-        tv.set_wrap_mode(gtk.WRAP_WORD)
-        tv.set_cursor_visible(False)
-        self.buf = gtk.TextBuffer()
-        self.buf.set_text(self.image_path)
-        tv.set_buffer(self.buf)
-        scroll.add(tv)
-        table.attach(scroll, 0, 10, 0, 1)
-
-        # There are 2 ways to use DeployImageDialog
-        # One way is that called by HOB when the 'Deploy Image' button is clicked
-        # The other way is that called by a standalone script.
-        # Following block of codes handles the latter way. It adds a 'Select Image' button and
-        # emit a signal when the button is clicked.
-        if self.standalone:
-                gobject.signal_new("select_image_clicked", self, gobject.SIGNAL_RUN_FIRST,
-                                   gobject.TYPE_NONE, ())
-                icon = gtk.Image()
-                pix_buffer = gtk.gdk.pixbuf_new_from_file(hic.ICON_IMAGES_DISPLAY_FILE)
-                icon.set_from_pixbuf(pix_buffer)
-                button = gtk.Button("Select Image")
-                button.set_image(icon)
-                #button.set_size_request(140, 50)
-                table.attach(button, 9, 10, 1, 2, gtk.FILL, 0, 0, 0)
-                button.connect("clicked", self.select_image_button_clicked_cb)
-
-        separator = gtk.HSeparator()
-        self.vbox.pack_start(separator, expand=False, fill=False, padding=10)
-
-        self.usb_desc = gtk.Label()
-        self.usb_desc.set_alignment(0.0, 0.5)
-        markup = "<span font_desc='12'>You haven't chosen any USB drive.</span>"
-        self.usb_desc.set_markup(markup)
-
-        self.usb_combo = gtk.combo_box_new_text()
-        self.usb_combo.connect("changed", self.usb_combo_changed_cb)
-        model = self.usb_combo.get_model()
-        model.clear()
-        self.usb_combo.append_text(self.__dummy_usb__)
-        for usb in self.find_all_usb_devices():
-            self.usb_combo.append_text("/dev/" + usb)
-        self.usb_combo.set_active(0)
-        self.vbox.pack_start(self.usb_combo, expand=False, fill=False)
-        self.vbox.pack_start(self.usb_desc, expand=False, fill=False, padding=2)
-
-        self.progress_bar = HobProgressBar()
-        self.vbox.pack_start(self.progress_bar, expand=False, fill=False)
-        separator = gtk.HSeparator()
-        self.vbox.pack_start(separator, expand=False, fill=True, padding=10)
-
-        self.vbox.show_all()
-        self.progress_bar.hide()
-
-    def set_image_text_buffer(self, image_path):
-        self.buf.set_text(image_path)
-
-    def set_image_path(self, image_path):
-        self.image_path = image_path
-
-    def popen_read(self, cmd):
-        tmpout, errors = bb.process.run("%s" % cmd)
-        return tmpout.strip()
-
-    def find_all_usb_devices(self):
-        usb_devs = [ os.readlink(u)
-            for u in glob.glob('/dev/disk/by-id/usb*')
-            if not re.search(r'part\d+', u) ]
-        return [ '%s' % u[u.rfind('/')+1:] for u in usb_devs ]
-
-    def get_usb_info(self, dev):
-        return "%s %s" % \
-            (self.popen_read('cat /sys/class/block/%s/device/vendor' % dev),
-            self.popen_read('cat /sys/class/block/%s/device/model' % dev))
-
-    def select_image_button_clicked_cb(self, button):
-            self.emit('select_image_clicked')
-
-    def usb_combo_changed_cb(self, usb_combo):
-        combo_item = self.usb_combo.get_active_text()
-        if not combo_item or combo_item == self.__dummy_usb__:
-            markup = "<span font_desc='12'>You haven't chosen any USB drive.</span>"
-            self.usb_desc.set_markup(markup)
-        else:
-            markup = "<span font_desc='12'>" + self.get_usb_info(combo_item.lstrip("/dev/")) + "</span>"
-            self.usb_desc.set_markup(markup)
-
-    def response_cb(self, dialog, response_id):
-        if response_id == gtk.RESPONSE_YES:
-            lbl = ''
-            combo_item = self.usb_combo.get_active_text()
-            if combo_item and combo_item != self.__dummy_usb__ and self.image_path:
-                cmdline = bb.ui.crumbs.utils.which_terminal()
-                if cmdline:
-                    tmpfile = tempfile.NamedTemporaryFile()
-                    cmdline += "\"sudo dd if=" + self.image_path + \
-                                " of=" + combo_item + "; echo $? > " + tmpfile.name + "\""
-                    subprocess.call(shlex.split(cmdline))
-
-                    if int(tmpfile.readline().strip()) == 0:
-                        lbl = "<b>Deploy image successfully.</b>"
-                    else:
-                        lbl = "<b>Failed to deploy image.</b>\nPlease check image <b>%s</b> exists and USB device <b>%s</b> is writable." % (self.image_path, combo_item)
-                    tmpfile.close()
-            else:
-                if not self.image_path:
-                    lbl = "<b>No selection made.</b>\nYou have not selected an image to deploy."
-                else:
-                    lbl = "<b>No selection made.</b>\nYou have not selected a USB device."
-            if len(lbl):
-                crumbs_dialog = CrumbsMessageDialog(self, lbl, gtk.STOCK_DIALOG_INFO)
-                button = crumbs_dialog.add_button("Close", gtk.RESPONSE_OK)
-                HobButton.style_button(button)
-                crumbs_dialog.run()
-                crumbs_dialog.destroy()
-
-    def update_progress_bar(self, title, fraction, status=None):
-        self.progress_bar.update(fraction)
-        self.progress_bar.set_title(title)
-        self.progress_bar.set_rcstyle(status)
-
-    def write_file(self, ifile, ofile):
-        self.progress_bar.reset()
-        self.progress_bar.show()
-
-        f_from = os.open(ifile, os.O_RDONLY)
-        f_to = os.open(ofile, os.O_WRONLY)
-
-        total_size = os.stat(ifile).st_size
-        written_size = 0
-
-        while True:
-            buf = os.read(f_from, 1024*1024)
-            if not buf:
-                break
-            os.write(f_to, buf)
-            written_size += 1024*1024
-            self.update_progress_bar("Writing to usb:", written_size * 1.0/total_size)
-
-        self.update_progress_bar("Writing completed:", 1.0)
-        os.close(f_from)
-        os.close(f_to)
-        self.progress_bar.hide()

bitbake/lib/bb/ui/crumbs/hig/imageselectiondialog.py

@@ -1,172 +0,0 @@
-#
-# BitBake Graphical GTK User Interface
-#
-# Copyright (C) 2011-2012   Intel Corporation
-#
-# Authored by Joshua Lock <josh@linux.intel.com>
-# Authored by Dongxiao Xu <dongxiao.xu@intel.com>
-# Authored by Shane Wang <shane.wang@intel.com>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-import gtk
-import gobject
-import os
-from bb.ui.crumbs.hobwidget import HobViewTable, HobInfoButton, HobButton, HobAltButton
-from bb.ui.crumbs.hig.crumbsdialog import CrumbsDialog
-from bb.ui.crumbs.hig.layerselectiondialog import LayerSelectionDialog
-
-"""
-The following are convenience classes for implementing GNOME HIG compliant
-BitBake GUI's
-In summary: spacing = 12px, border-width = 6px
-"""
-
-class ImageSelectionDialog (CrumbsDialog):
-
-    __columns__ = [{
-            'col_name' : 'Image name',
-            'col_id'   : 0,
-            'col_style': 'text',
-            'col_min'  : 400,
-            'col_max'  : 400
-        }, {
-            'col_name' : 'Select',
-            'col_id'   : 1,
-            'col_style': 'radio toggle',
-            'col_min'  : 160,
-            'col_max'  : 160
-    }]
-
-
-    def __init__(self, image_folder, image_types, title, parent, flags, buttons=None, image_extension = {}):
-        super(ImageSelectionDialog, self).__init__(title, parent, flags, buttons)
-        self.connect("response", self.response_cb)
-
-        self.image_folder = image_folder
-        self.image_types  = image_types
-        self.image_list = []
-        self.image_names = []
-        self.image_extension = image_extension
-
-        # create visual elements on the dialog
-        self.create_visual_elements()
-
-        self.image_store = gtk.ListStore(gobject.TYPE_STRING, gobject.TYPE_BOOLEAN)
-        self.fill_image_store()
-
-    def create_visual_elements(self):
-        hbox = gtk.HBox(False, 6)
-
-        self.vbox.pack_start(hbox, expand=False, fill=False)
-
-        entry = gtk.Entry()
-        entry.set_text(self.image_folder)
-        table = gtk.Table(1, 10, True)
-        table.set_size_request(560, -1)
-        hbox.pack_start(table, expand=False, fill=False)
-        table.attach(entry, 0, 9, 0, 1)
-        image = gtk.Image()
-        image.set_from_stock(gtk.STOCK_OPEN, gtk.ICON_SIZE_BUTTON)
-        open_button = gtk.Button()
-        open_button.set_image(image)
-        open_button.connect("clicked", self.select_path_cb, self, entry)
-        table.attach(open_button, 9, 10, 0, 1)
-
-        self.image_table = HobViewTable(self.__columns__, "Images")
-        self.image_table.set_size_request(-1, 300)
-        self.image_table.connect("toggled", self.toggled_cb)
-        self.image_table.connect_group_selection(self.table_selected_cb)
-        self.image_table.connect("row-activated", self.row_actived_cb)
-        self.vbox.pack_start(self.image_table, expand=True, fill=True)
-
-        self.show_all()
-
-    def change_image_cb(self, model, path, columnid):
-        if not model:
-            return
-        iter = model.get_iter_first()
-        while iter:
-            rowpath = model.get_path(iter)
-            model[rowpath][columnid] = False
-            iter = model.iter_next(iter)
-
-        model[path][columnid] = True
-
-    def toggled_cb(self, table, cell, path, columnid, tree):
-        model = tree.get_model()
-        self.change_image_cb(model, path, columnid)
-
-    def table_selected_cb(self, selection):
-        model, paths = selection.get_selected_rows()
-        if paths:
-            self.change_image_cb(model, paths[0], 1)
-
-    def row_actived_cb(self, tab, model, path):
-        self.change_image_cb(model, path, 1)
-        self.emit('response', gtk.RESPONSE_YES)
-
-    def select_path_cb(self, action, parent, entry):
-        dialog = gtk.FileChooserDialog("", parent,
-                                       gtk.FILE_CHOOSER_ACTION_SELECT_FOLDER)
-        text = entry.get_text()
-        dialog.set_current_folder(text if len(text) > 0 else os.getcwd())
-        button = dialog.add_button("Cancel", gtk.RESPONSE_NO)
-        HobAltButton.style_button(button)
-        button = dialog.add_button("Open", gtk.RESPONSE_YES)
-        HobButton.style_button(button)
-        response = dialog.run()
-        if response == gtk.RESPONSE_YES:
-            path = dialog.get_filename()
-            entry.set_text(path)
-            self.image_folder = path
-            self.fill_image_store()
-
-        dialog.destroy()
-
-    def fill_image_store(self):
-        self.image_list = []
-        self.image_store.clear()
-        imageset = set()
-        for root, dirs, files in os.walk(self.image_folder):
-            # ignore the sub directories
-            dirs[:] = []
-            for f in files:
-                for image_type in self.image_types:
-                    if image_type in self.image_extension:
-                        real_types = self.image_extension[image_type]
-                    else:
-                        real_types = [image_type]
-                    for real_image_type in real_types:
-                        if f.endswith('.' + real_image_type):
-                            imageset.add(f.rsplit('.' + real_image_type)[0].rsplit('.rootfs')[0])
-                            self.image_list.append(f)
-
-        for image in imageset:
-            self.image_store.set(self.image_store.append(), 0, image, 1, False)
-
-        self.image_table.set_model(self.image_store)
-
-    def response_cb(self, dialog, response_id):
-        self.image_names = []
-        if response_id == gtk.RESPONSE_YES:
-            iter = self.image_store.get_iter_first()
-            while iter:
-                path = self.image_store.get_path(iter)
-                if self.image_store[path][1]:
-                    for f in self.image_list:
-                        if f.startswith(self.image_store[path][0] + '.'):
-                            self.image_names.append(f)
-                    break
-                iter = self.image_store.iter_next(iter)

bitbake/lib/bb/ui/crumbs/hig/layerselectiondialog.py

@@ -1,297 +0,0 @@
-#
-# BitBake Graphical GTK User Interface
-#
-# Copyright (C) 2011-2012   Intel Corporation
-#
-# Authored by Joshua Lock <josh@linux.intel.com>
-# Authored by Dongxiao Xu <dongxiao.xu@intel.com>
-# Authored by Shane Wang <shane.wang@intel.com>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-import gtk
-import gobject
-import os
-import tempfile
-from bb.ui.crumbs.hobwidget import hic, HobButton, HobAltButton
-from bb.ui.crumbs.hig.crumbsdialog import CrumbsDialog
-from bb.ui.crumbs.hig.crumbsmessagedialog import CrumbsMessageDialog
-
-"""
-The following are convenience classes for implementing GNOME HIG compliant
-BitBake GUI's
-In summary: spacing = 12px, border-width = 6px
-"""
-
-class CellRendererPixbufActivatable(gtk.CellRendererPixbuf):
-    """
-    A custom CellRenderer implementation which is activatable
-    so that we can handle user clicks
-    """
-    __gsignals__    = { 'clicked' : (gobject.SIGNAL_RUN_LAST,
-                                     gobject.TYPE_NONE,
-                                     (gobject.TYPE_STRING,)), }
-
-    def __init__(self):
-        gtk.CellRendererPixbuf.__init__(self)
-        self.set_property('mode', gtk.CELL_RENDERER_MODE_ACTIVATABLE)
-        self.set_property('follow-state', True)
-
-    """
-    Respond to a user click on a cell
-    """
-    def do_activate(self, even, widget, path, background_area, cell_area, flags):
-        self.emit('clicked', path)
-
-#
-# LayerSelectionDialog
-#
-class LayerSelectionDialog (CrumbsDialog):
-
-    TARGETS = [
-        ("MY_TREE_MODEL_ROW", gtk.TARGET_SAME_WIDGET, 0),
-        ("text/plain", 0, 1),
-        ("TEXT", 0, 2),
-        ("STRING", 0, 3),
-        ]
-
-    def gen_label_widget(self, content):
-        label = gtk.Label()
-        label.set_alignment(0, 0)
-        label.set_markup(content)
-        label.show()
-        return label
-
-    def layer_widget_toggled_cb(self, cell, path, layer_store):
-        name = layer_store[path][0]
-        toggle = not layer_store[path][1]
-        layer_store[path][1] = toggle
-
-    def layer_widget_add_clicked_cb(self, action, layer_store, parent):
-        dialog = gtk.FileChooserDialog("Add new layer", parent,
-                                       gtk.FILE_CHOOSER_ACTION_SELECT_FOLDER)
-        button = dialog.add_button("Cancel", gtk.RESPONSE_NO)
-        HobAltButton.style_button(button)
-        button = dialog.add_button("Open", gtk.RESPONSE_YES)
-        HobButton.style_button(button)
-        label = gtk.Label("Select the layer you wish to add")
-        label.show()
-        dialog.set_extra_widget(label)
-        response = dialog.run()
-        path = dialog.get_filename()
-        dialog.destroy()
-
-        lbl = "<b>Error</b>\nUnable to load layer <i>%s</i> because " % path
-        if response == gtk.RESPONSE_YES:
-            import os
-            import os.path
-            layers = []
-            it = layer_store.get_iter_first()
-            while it:
-                layers.append(layer_store.get_value(it, 0))
-                it = layer_store.iter_next(it)
-
-            if not path:
-                lbl += "it is an invalid path."
-            elif not os.path.exists(path+"/conf/layer.conf"):
-                lbl += "there is no layer.conf inside the directory."
-            elif path in layers:
-                lbl += "it is already in loaded layers."
-            else:
-                layer_store.append([path])
-                return
-            dialog = CrumbsMessageDialog(parent, lbl)
-            dialog.add_button(gtk.STOCK_CLOSE, gtk.RESPONSE_OK)
-            response = dialog.run()
-            dialog.destroy()
-
-    def layer_widget_del_clicked_cb(self, action, tree_selection, layer_store):
-        model, iter = tree_selection.get_selected()
-        if iter:
-            layer_store.remove(iter)
-
-
-    def gen_layer_widget(self, layers, layers_avail, window, tooltip=""):
-        hbox = gtk.HBox(False, 6)
-
-        layer_tv = gtk.TreeView()
-        layer_tv.set_rules_hint(True)
-        layer_tv.set_headers_visible(False)
-        tree_selection = layer_tv.get_selection()
-        tree_selection.set_mode(gtk.SELECTION_SINGLE)
-
-        # Allow enable drag and drop of rows including row move
-        dnd_internal_target = ''
-        dnd_targets = [(dnd_internal_target, gtk.TARGET_SAME_WIDGET, 0)]
-        layer_tv.enable_model_drag_source( gtk.gdk.BUTTON1_MASK,
-            dnd_targets,
-            gtk.gdk.ACTION_MOVE)
-        layer_tv.enable_model_drag_dest(dnd_targets,
-            gtk.gdk.ACTION_MOVE)
-        layer_tv.connect("drag_data_get", self.drag_data_get_cb)
-        layer_tv.connect("drag_data_received", self.drag_data_received_cb)
-
-        col0= gtk.TreeViewColumn('Path')
-        cell0 = gtk.CellRendererText()
-        cell0.set_padding(5,2)
-        col0.pack_start(cell0, True)
-        col0.set_cell_data_func(cell0, self.draw_layer_path_cb)
-        layer_tv.append_column(col0)
-
-        scroll = gtk.ScrolledWindow()
-        scroll.set_policy(gtk.POLICY_NEVER, gtk.POLICY_AUTOMATIC)
-        scroll.set_shadow_type(gtk.SHADOW_IN)
-        scroll.add(layer_tv)
-
-        table_layer = gtk.Table(2, 10, False)
-        hbox.pack_start(table_layer, expand=True, fill=True)
-
-        table_layer.attach(scroll, 0, 10, 0, 1)
-
-        layer_store = gtk.ListStore(gobject.TYPE_STRING)
-        for layer in layers:
-            layer_store.append([layer])
-
-        col1 = gtk.TreeViewColumn('Enabled')
-        layer_tv.append_column(col1)
-
-        cell1 = CellRendererPixbufActivatable()
-        cell1.set_fixed_size(-1,35)
-        cell1.connect("clicked", self.del_cell_clicked_cb, layer_store)
-        col1.pack_start(cell1, True)
-        col1.set_cell_data_func(cell1, self.draw_delete_button_cb, layer_tv)
-
-        add_button = gtk.Button()
-        add_button.set_relief(gtk.RELIEF_NONE)
-        box = gtk.HBox(False, 6)
-        box.show()
-        add_button.add(box)
-        add_button.connect("enter-notify-event", self.add_hover_cb)
-        add_button.connect("leave-notify-event", self.add_leave_cb)
-        self.im = gtk.Image()
-        self.im.set_from_file(hic.ICON_INDI_ADD_FILE)
-        self.im.show()
-        box.pack_start(self.im, expand=False, fill=False, padding=6)
-        lbl = gtk.Label("Add layer")
-        lbl.set_alignment(0.0, 0.5)
-        lbl.show()
-        box.pack_start(lbl, expand=True, fill=True, padding=6)
-        add_button.connect("clicked", self.layer_widget_add_clicked_cb, layer_store, window)
-        table_layer.attach(add_button, 0, 10, 1, 2, gtk.EXPAND | gtk.FILL, 0, 0, 6)
-        layer_tv.set_model(layer_store)
-
-        hbox.show_all()
-
-        return hbox, layer_store
-
-    def drag_data_get_cb(self, treeview, context, selection, target_id, etime):
-        treeselection = treeview.get_selection()
-        model, iter = treeselection.get_selected()
-        data = model.get_value(iter, 0)
-        selection.set(selection.target, 8, data)
-
-    def drag_data_received_cb(self, treeview, context, x, y, selection, info, etime):
-        model = treeview.get_model()
-        data = selection.data
-        drop_info = treeview.get_dest_row_at_pos(x, y)
-        if drop_info:
-            path, position = drop_info
-            iter = model.get_iter(path)
-            if (position == gtk.TREE_VIEW_DROP_BEFORE or position == gtk.TREE_VIEW_DROP_INTO_OR_BEFORE):
-                model.insert_before(iter, [data])
-            else:
-                model.insert_after(iter, [data])
-        else:
-            model.append([data])
-        if context.action == gtk.gdk.ACTION_MOVE:
-            context.finish(True, True, etime)
-        return
-
-    def add_hover_cb(self, button, event):
-        self.im.set_from_file(hic.ICON_INDI_ADD_HOVER_FILE)
-
-    def add_leave_cb(self, button, event):
-        self.im.set_from_file(hic.ICON_INDI_ADD_FILE)
-
-    def __init__(self, title, layers, layers_non_removable, all_layers, parent, flags, buttons=None):
-        super(LayerSelectionDialog, self).__init__(title, parent, flags, buttons)
-
-        # class members from other objects
-        self.layers = layers
-        self.layers_non_removable = layers_non_removable
-        self.all_layers = all_layers
-        self.layers_changed = False
-
-        # icon for remove button in TreeView
-        im = gtk.Image()
-        im.set_from_file(hic.ICON_INDI_REMOVE_FILE)
-        self.rem_icon = im.get_pixbuf()
-
-        # class members for internal use
-        self.layer_store = None
-
-        # create visual elements on the dialog
-        self.create_visual_elements()
-        self.connect("response", self.response_cb)
-
-    def create_visual_elements(self):
-        layer_widget, self.layer_store = self.gen_layer_widget(self.layers, self.all_layers, self, None)
-        layer_widget.set_size_request(450, 250)
-        self.vbox.pack_start(layer_widget, expand=True, fill=True)
-        self.show_all()
-
-    def response_cb(self, dialog, response_id):
-        model = self.layer_store
-        it = model.get_iter_first()
-        layers = []
-        while it:
-            layers.append(model.get_value(it, 0))
-            it = model.iter_next(it)
-
-        self.layers_changed = (self.layers != layers)
-        self.layers = layers
-
-    """
-    A custom cell_data_func to draw a delete 'button' in the TreeView for layers
-    other than the meta layer. The deletion of which is prevented so that the
-    user can't shoot themselves in the foot too badly.
-    """
-    def draw_delete_button_cb(self, col, cell, model, it, tv):
-        path =  model.get_value(it, 0)
-        if path in self.layers_non_removable:
-            cell.set_sensitive(False)
-            cell.set_property('pixbuf', None)
-            cell.set_property('mode', gtk.CELL_RENDERER_MODE_INERT)
-        else:
-            cell.set_property('pixbuf', self.rem_icon)
-            cell.set_sensitive(True)
-            cell.set_property('mode', gtk.CELL_RENDERER_MODE_ACTIVATABLE)
-
-        return True
-
-    """
-    A custom cell_data_func to write an extra message into the layer path cell
-    for the meta layer. We should inform the user that they can't remove it for
-    their own safety.
-    """
-    def draw_layer_path_cb(self, col, cell, model, it):
-        path = model.get_value(it, 0)
-        if path in self.layers_non_removable:
-            cell.set_property('markup', "<b>It cannot be removed</b>\n%s" % path)
-        else:
-            cell.set_property('text', path)
-
-    def del_cell_clicked_cb(self, cell, path, model):
-        it = model.get_iter_from_string(path)
-        model.remove(it)

bitbake/lib/bb/ui/crumbs/hig/parsingwarningsdialog.py

@@ -1,163 +0,0 @@
-#
-# BitBake Graphical GTK User Interface
-#
-# Copyright (C) 2011-2012   Intel Corporation
-#
-# Authored by Cristiana Voicu <cristiana.voicu@intel.com>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-import gtk
-import gobject
-from bb.ui.crumbs.hobwidget import HobAltButton
-from bb.ui.crumbs.hig.crumbsdialog import CrumbsDialog
-
-"""
-The following are convenience classes for implementing GNOME HIG compliant
-BitBake GUI's
-In summary: spacing = 12px, border-width = 6px
-"""
-
-#
-# ParsingWarningsDialog
-#
-class ParsingWarningsDialog (CrumbsDialog):
-
-    def __init__(self, title, warnings, parent, flags, buttons=None):
-        super(ParsingWarningsDialog, self).__init__(title, parent, flags, buttons)
-
-        self.warnings = warnings
-        self.warning_on = 0
-        self.warn_nb = len(warnings)
-
-        # create visual elements on the dialog
-        self.create_visual_elements()
-
-    def cancel_button_cb(self, button):
-        self.destroy()
-
-    def previous_button_cb(self, button):
-        self.warning_on = self.warning_on - 1
-        self.refresh_components()
-
-    def next_button_cb(self, button):
-        self.warning_on = self.warning_on + 1
-        self.refresh_components()
-
-    def refresh_components(self):
-        lbl = self.warnings[self.warning_on]
-        #when the warning text has more than 400 chars, it uses a scroll bar
-        if 0<= len(lbl) < 400:
-            self.warning_label.set_size_request(320, 230)
-            self.warning_label.set_use_markup(True)
-            self.warning_label.set_line_wrap(True)
-            self.warning_label.set_markup(lbl)
-            self.warning_label.set_property("yalign", 0.00)
-        else:
-            self.textWindow.set_shadow_type(gtk.SHADOW_IN)
-            self.textWindow.set_policy(gtk.POLICY_AUTOMATIC, gtk.POLICY_AUTOMATIC)
-            self.msgView = gtk.TextView()
-            self.msgView.set_editable(False)
-            self.msgView.set_wrap_mode(gtk.WRAP_WORD)
-            self.msgView.set_cursor_visible(False)
-            self.msgView.set_size_request(320, 230)
-            self.buf = gtk.TextBuffer()
-            self.buf.set_text(lbl)
-            self.msgView.set_buffer(self.buf)
-            self.textWindow.add(self.msgView)
-            self.msgView.show()
-
-        if self.warning_on==0:
-            self.previous_button.set_sensitive(False)
-        else:
-            self.previous_button.set_sensitive(True)
-
-        if self.warning_on==self.warn_nb-1:
-            self.next_button.set_sensitive(False)
-        else:
-            self.next_button.set_sensitive(True)
-
-        if self.warn_nb>1:
-            self.heading = "Warning " + str(self.warning_on + 1) + " of " + str(self.warn_nb)
-            self.heading_label.set_markup('<span weight="bold">%s</span>' % self.heading)
-        else:
-            self.heading = "Warning"
-            self.heading_label.set_markup('<span weight="bold">%s</span>' % self.heading)
-
-        self.show_all()
-
-        if 0<= len(lbl) < 400:
-            self.textWindow.hide()
-        else:
-            self.warning_label.hide()
-
-    def create_visual_elements(self):
-        self.set_size_request(350, 350)
-        self.heading_label = gtk.Label()
-        self.heading_label.set_alignment(0, 0)
-        self.warning_label = gtk.Label()
-        self.warning_label.set_selectable(True)
-        self.warning_label.set_alignment(0, 0)
-        self.textWindow = gtk.ScrolledWindow()
-
-        table = gtk.Table(1, 10, False)
-
-        cancel_button = gtk.Button()
-        cancel_button.set_label("Close")
-        cancel_button.connect("clicked", self.cancel_button_cb)
-        cancel_button.set_size_request(110, 30)
-
-        self.previous_button = gtk.Button()
-        image1 = gtk.image_new_from_stock(gtk.STOCK_GO_BACK, gtk.ICON_SIZE_BUTTON)
-        image1.show()
-        box = gtk.HBox(False, 6)
-        box.show()
-        self.previous_button.add(box)
-        lbl = gtk.Label("Previous")
-        lbl.show()
-        box.pack_start(image1, expand=False, fill=False, padding=3)
-        box.pack_start(lbl, expand=True, fill=True, padding=3)
-        self.previous_button.connect("clicked", self.previous_button_cb)
-        self.previous_button.set_size_request(110, 30)
-
-        self.next_button = gtk.Button()
-        image2 = gtk.image_new_from_stock(gtk.STOCK_GO_FORWARD, gtk.ICON_SIZE_BUTTON)
-        image2.show()
-        box = gtk.HBox(False, 6)
-        box.show()
-        self.next_button.add(box)
-        lbl = gtk.Label("Next")
-        lbl.show()
-        box.pack_start(lbl, expand=True, fill=True, padding=3)
-        box.pack_start(image2, expand=False, fill=False, padding=3)
-        self.next_button.connect("clicked", self.next_button_cb)
-        self.next_button.set_size_request(110, 30)
-
-        #when there more than one warning, we need "previous" and "next" button
-        if self.warn_nb>1:
-            self.vbox.pack_start(self.heading_label, expand=False, fill=False)
-            self.vbox.pack_start(self.warning_label, expand=False, fill=False)
-            self.vbox.pack_start(self.textWindow, expand=False, fill=False)
-            table.attach(cancel_button, 6, 7, 0, 1, xoptions=gtk.SHRINK)
-            table.attach(self.previous_button, 7, 8, 0, 1, xoptions=gtk.SHRINK)
-            table.attach(self.next_button, 8, 9, 0, 1, xoptions=gtk.SHRINK)
-            self.vbox.pack_end(table, expand=False, fill=False)
-        else:
-            self.vbox.pack_start(self.heading_label, expand=False, fill=False)
-            self.vbox.pack_start(self.warning_label, expand=False, fill=False)
-            self.vbox.pack_start(self.textWindow, expand=False, fill=False)
-            cancel_button = self.add_button("Close", gtk.RESPONSE_CANCEL)
-            HobAltButton.style_button(cancel_button)
-
-        self.refresh_components()

bitbake/lib/bb/ui/crumbs/hig/propertydialog.py

@@ -1,437 +0,0 @@
-#
-# BitBake Graphical GTK User Interface
-#
-# Copyright (C) 2011-2013   Intel Corporation
-#
-# Authored by Andrei Dinu <andrei.adrianx.dinu@intel.com>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-import string
-import gtk
-import gobject
-import os
-import tempfile
-import glib
-from bb.ui.crumbs.hig.crumbsdialog import CrumbsDialog
-from bb.ui.crumbs.hig.settingsuihelper import SettingsUIHelper
-from bb.ui.crumbs.hig.crumbsmessagedialog import CrumbsMessageDialog
-from bb.ui.crumbs.hig.layerselectiondialog import LayerSelectionDialog
-
-"""
-The following are convenience classes for implementing GNOME HIG compliant
-BitBake GUI's
-In summary: spacing = 12px, border-width = 6px
-"""
-
-class PropertyDialog(CrumbsDialog):
-	
-	def __init__(self, title, parent, information, flags, buttons=None):
-		
-		super(PropertyDialog, self).__init__(title, parent, flags, buttons)
-                
-                self.properties = information
-
-                if len(self.properties) == 10:
-		        self.create_recipe_visual_elements()
-                elif len(self.properties) == 5:
-                        self.create_package_visual_elements()
-                else:
-                        self.create_information_visual_elements()
-
-
-        def create_information_visual_elements(self):
-
-                HOB_ICON_BASE_DIR = os.path.join(os.path.dirname(os.path.dirname(os.path.dirname(__file__))), ("icons/"))
-                ICON_PACKAGES_DISPLAY_FILE    = os.path.join(HOB_ICON_BASE_DIR, ('info/info_display.png'))
-
-                self.set_resizable(False)
-
-                self.table = gtk.Table(1,1,False)
-                self.table.set_row_spacings(0)
-                self.table.set_col_spacings(0)
-
-                self.image = gtk.Image()
-                self.image.set_from_file(ICON_PACKAGES_DISPLAY_FILE)
-                self.image.set_property("xalign",0)
-                #self.vbox.add(self.image)
-
-                image_info = self.properties.split("*")[0]
-                info = self.properties.split("*")[1]
-                
-                vbox = gtk.VBox(True, spacing=30)        
-                
-                self.label_short = gtk.Label()
-                self.label_short.set_line_wrap(False)
-                self.label_short.set_markup(image_info)
-                self.label_short.set_property("xalign", 0)
-
-                self.info_label = gtk.Label()
-                self.info_label.set_line_wrap(True)
-                self.info_label.set_markup(info)
-                self.info_label.set_property("yalign", 0.5)
-
-                self.table.attach(self.image, 0,1,0,1, xoptions=gtk.FILL|gtk.EXPAND, yoptions=gtk.FILL,xpadding=5,ypadding=5)
-                self.table.attach(self.label_short, 0,1,0,1, xoptions=gtk.FILL|gtk.EXPAND, yoptions=gtk.FILL,xpadding=40,ypadding=5)
-                self.table.attach(self.info_label, 0,1,1,2, xoptions=gtk.FILL|gtk.EXPAND, yoptions=gtk.FILL,xpadding=40,ypadding=10)
-        
-                self.vbox.add(self.table)
-
-        def treeViewTooltip( self, widget, e, tooltips, cell, emptyText="" ):
-                 try:
-                           (path,col,x,y) = widget.get_path_at_pos( int(e.x), int(e.y) )
-                           it = widget.get_model().get_iter(path)
-                           value = widget.get_model().get_value(it,cell)
-                           if value in self.tooltip_items:
-                                tooltips.set_tip(widget, self.tooltip_items[value])
-                                tooltips.enable()
-                           else:
-                                tooltips.set_tip(widget, emptyText)
-                 except:
-                           tooltips.set_tip(widget, emptyText)
-
-                
-        def create_package_visual_elements(self):
-
-                name = self.properties['name']
-                binb = self.properties['binb']
-                size = self.properties['size']
-                recipe = self.properties['recipe']
-                file_list = self.properties['files_list']
-
-                file_list = file_list.strip("{}'")
-                files_temp = ''
-                paths_temp = ''
-                files_binb = []
-                paths_binb = []
-
-                self.tooltip_items = {}
-
-                self.set_resizable(False)
-                
-                #cleaning out the recipe variable
-                recipe = recipe.split("+")[0]
-
-                vbox = gtk.VBox(True,spacing = 0)
-
-                ###################################### NAME ROW + COL #################################
-
-                self.label_short = gtk.Label()
-                self.label_short.set_size_request(300,-1)
-                self.label_short.set_selectable(True)
-                self.label_short.set_line_wrap(True)
-                self.label_short.set_markup("<span weight=\"bold\">Name: </span>" + name)
-                self.label_short.set_property("xalign", 0)
-                                
-                self.vbox.add(self.label_short)
-
-                ###################################### SIZE ROW + COL ######################################
-
-                self.label_short = gtk.Label()
-                self.label_short.set_size_request(300,-1)
-                self.label_short.set_selectable(True)
-                self.label_short.set_line_wrap(True)
-                self.label_short.set_markup("<span weight=\"bold\">Size: </span>" + size)
-                self.label_short.set_property("xalign", 0)
-                
-                self.vbox.add(self.label_short)
-
-                ##################################### RECIPE ROW + COL #########################################
-
-                self.label_short = gtk.Label()
-                self.label_short.set_size_request(300,-1)
-                self.label_short.set_selectable(True)
-                self.label_short.set_line_wrap(True)
-                self.label_short.set_markup("<span weight=\"bold\">Recipe: </span>" + recipe)
-                self.label_short.set_property("xalign", 0)
-
-                self.vbox.add(self.label_short)
-
-                ##################################### BINB ROW + COL #######################################
-                
-                if binb != '':
-                        self.label_short = gtk.Label()
-                        self.label_short.set_selectable(True)
-                        self.label_short.set_line_wrap(True)
-                        self.label_short.set_markup("<span weight=\"bold\">Brought in by: </span>")
-                        self.label_short.set_property("xalign", 0)                
-
-                        self.label_info = gtk.Label()
-                        self.label_info.set_size_request(300,-1)
-                        self.label_info.set_selectable(True)
-                        self.label_info.set_line_wrap(True)
-                        self.label_info.set_markup(binb)
-                        self.label_info.set_property("xalign", 0)               
-                                                        
-                        self.vbox.add(self.label_short)
-                        self.vbox.add(self.label_info)
-
-                #################################### FILES BROUGHT BY PACKAGES ###################################
-
-                if file_list != '':
-                
-                        self.textWindow = gtk.ScrolledWindow()
-                        self.textWindow.set_shadow_type(gtk.SHADOW_IN)
-                        self.textWindow.set_policy(gtk.POLICY_AUTOMATIC, gtk.POLICY_AUTOMATIC)
-                        self.textWindow.set_size_request(100, 170)
-
-                        sstatemirrors_store = gtk.ListStore(str)
-
-                        self.sstatemirrors_tv = gtk.TreeView()
-                        self.sstatemirrors_tv.set_rules_hint(True)
-                        self.sstatemirrors_tv.set_headers_visible(True)
-                        self.textWindow.add(self.sstatemirrors_tv)
-
-                        self.cell1 = gtk.CellRendererText()
-                        col1 = gtk.TreeViewColumn('Package files', self.cell1)
-                        col1.set_cell_data_func(self.cell1, self.regex_field)
-                        self.sstatemirrors_tv.append_column(col1)
-
-                        for items in file_list.split(']'):
-                            if len(items) > 1:
-                                paths_temp = items.split(":")[0]
-                                paths_binb.append(paths_temp.strip(" ,'"))
-                                files_temp = items.split(":")[1]
-                                files_binb.append(files_temp.strip(" ['"))
-
-                        unsorted_list = []
-                        
-                        for items in range(len(paths_binb)):
-                              if len(files_binb[items]) > 1:
-                                  for aduse in (files_binb[items].split(",")):
-                                        unsorted_list.append(paths_binb[items].split(name)[len(paths_binb[items].split(name))-1] + '/' + aduse.strip(" '"))
-                       
-                         
-                        unsorted_list.sort()
-                        for items in unsorted_list:
-                                temp = items
-                                while len(items) > 35:
-                                        items = items[:len(items)/2] + "" + items[len(items)/2+1:]
-                                if len(items) == 35:
-                                        items = items[:len(items)/2] + "..." + items[len(items)/2+3:]
-                                        self.tooltip_items[items] = temp
-
-                                sstatemirrors_store.append([str(items)])
-                                
-                                
-                        self.sstatemirrors_tv.set_model(sstatemirrors_store)
-
-                        tips = gtk.Tooltips()
-                        tips.set_tip(self.sstatemirrors_tv, "")
-                        self.sstatemirrors_tv.connect("motion-notify-event", self.treeViewTooltip, tips, 0)
-                        self.sstatemirrors_tv.set_events(gtk.gdk.POINTER_MOTION_MASK)
-                        
-                        self.vbox.add(self.textWindow)                                      
-
-                self.vbox.show_all()
-
-
-        def regex_field(self, column, cell, model, iter):
-                cell.set_property('text', model.get_value(iter, 0))
-                return
-
-
-	def create_recipe_visual_elements(self):
-
-                summary = self.properties['summary']
-		name = self.properties['name']
-		version = self.properties['version']
-		revision = self.properties['revision']
-		binb = self.properties['binb']
-		group = self.properties['group']
-		license = self.properties['license']
-		homepage = self.properties['homepage']
-		bugtracker = self.properties['bugtracker']
-		description = self.properties['description']
-
-                self.set_resizable(False)
-		
-                #cleaning out the version variable and also the summary
-                version = version.split(":")[1]
-                if len(version) > 30:
-                        version = version.split("+")[0]
-                else:
-                        version = version.split("-")[0]
-                license = license.replace("&" , "and")
-                if (homepage == ''):
-                        homepage = 'unknown'
-                if (bugtracker == ''):
-                        bugtracker = 'unknown'
-                summary = summary.split("+")[0]
-                
-                #calculating the rows needed for the table
-                binb_items_count = len(binb.split(','))
-                binb_items = binb.split(',')
-                               		
-		vbox = gtk.VBox(True,spacing = 0)
-                
-                ######################################## SUMMARY LABEL #########################################                	                
-                
-                if summary != '':                
-                        self.label_short = gtk.Label()
-                        self.label_short.set_size_request(300,-1)
-                        self.label_short.set_selectable(True)                
-                        self.label_short.set_line_wrap(True)
-                        self.label_short.set_markup("<b>" + summary + "</b>")
-                        self.label_short.set_property("xalign", 0)
-                        
-                        self.vbox.pack_start(self.label_short, expand=False, fill=False, padding=0)
-                
-                ########################################## NAME ROW + COL #######################################
-                                
-                self.label_short = gtk.Label()
-                self.label_short.set_size_request(300,-1)
-                self.label_short.set_selectable(True)
-                self.label_short.set_line_wrap(True)
-                self.label_short.set_markup("<span weight=\"bold\">Name: </span>" + name)
-                self.label_short.set_property("xalign", 0)
-                                
-                self.vbox.add(self.label_short)
-
-                ####################################### VERSION ROW + COL ####################################
-                
-                self.label_short = gtk.Label()
-                self.label_short.set_size_request(300,-1)
-                self.label_short.set_selectable(True)
-                self.label_short.set_line_wrap(True)
-                self.label_short.set_markup("<span weight=\"bold\">Version: </span>" + version)
-                self.label_short.set_property("xalign", 0)
-                
-                self.vbox.add(self.label_short)
-
-                ##################################### REVISION ROW + COL #####################################
-
-                self.label_short = gtk.Label()
-                self.label_short.set_size_request(300,-1)
-                self.label_short.set_line_wrap(True)
-                self.label_short.set_selectable(True)
-                self.label_short.set_markup("<span weight=\"bold\">Revision: </span>" + revision)
-                self.label_short.set_property("xalign", 0)                
-                
-                self.vbox.add(self.label_short)
-
-                ################################## GROUP ROW + COL ############################################
-               
-                self.label_short = gtk.Label()
-                self.label_short.set_size_request(300,-1)  
-                self.label_short.set_selectable(True)              
-                self.label_short.set_line_wrap(True)                                
-                self.label_short.set_markup("<span weight=\"bold\">Group: </span>" + group)
-                self.label_short.set_property("xalign", 0)
-                                
-                self.vbox.add(self.label_short)
-
-                ################################# HOMEPAGE ROW + COL ############################################
-                
-                if homepage != 'unknown':
-                        self.label_info = gtk.Label()
-                        self.label_info.set_selectable(True)
-                        self.label_info.set_line_wrap(True)
-                        if len(homepage) > 35:
-                                self.label_info.set_markup("<a href=\"" + homepage + "\">" + homepage[0:35] + "..." + "</a>")
-                        else:
-                                self.label_info.set_markup("<a href=\"" + homepage + "\">" + homepage[0:60] + "</a>")
-
-                        self.label_info.set_property("xalign", 0)
-                       
-                        self.label_short = gtk.Label()
-                        self.label_short.set_size_request(300,-1)   
-                        self.label_short.set_selectable(True)                     
-                        self.label_short.set_line_wrap(True)                        
-                        self.label_short.set_markup("<b>Homepage: </b>")                      
-                        self.label_short.set_property("xalign", 0)
-                        
-                        self.vbox.add(self.label_short)
-                        self.vbox.add(self.label_info)
-               
-                ################################# BUGTRACKER ROW + COL ###########################################
-                
-                if bugtracker != 'unknown':
-                        self.label_info = gtk.Label()
-                        self.label_info.set_selectable(True)
-                        self.label_info.set_line_wrap(True)
-                        if len(bugtracker) > 35:
-                                self.label_info.set_markup("<a href=\"" + bugtracker + "\">" + bugtracker[0:35] + "..." + "</a>")
-                        else:
-                                self.label_info.set_markup("<a href=\"" + bugtracker + "\">" + bugtracker[0:60] + "</a>")
-                        self.label_info.set_property("xalign", 0)  
-
-                        self.label_short = gtk.Label()
-                        self.label_short.set_size_request(300,-1)    
-                        self.label_short.set_selectable(True)                    
-                        self.label_short.set_line_wrap(True)
-                        self.label_short.set_markup("<b>Bugtracker: </b>")                   
-                        self.label_short.set_property("xalign", 0)
-                        
-                        self.vbox.add(self.label_short)
-                        self.vbox.add(self.label_info)
-
-                ################################# LICENSE ROW + COL ############################################
-                
-                self.label_info = gtk.Label()
-                self.label_info.set_size_request(300,-1)
-                self.label_info.set_selectable(True)
-                self.label_info.set_line_wrap(True)
-                self.label_info.set_markup(license)
-                self.label_info.set_property("xalign", 0)
-
-                self.label_short = gtk.Label()
-                self.label_short.set_selectable(True)                
-                self.label_short.set_line_wrap(True)                
-                self.label_short.set_markup("<span weight=\"bold\">License: </span>")
-                self.label_short.set_property("xalign", 0)
-                
-                self.vbox.add(self.label_short)
-                self.vbox.add(self.label_info)
-
-                ################################### BINB ROW+COL #############################################
-                
-                if binb != '':
-                        self.label_short = gtk.Label()
-                        self.label_short.set_selectable(True)
-                        self.label_short.set_line_wrap(True)
-                        self.label_short.set_markup("<span weight=\"bold\">Brought in by: </span>")
-                        self.label_short.set_property("xalign", 0)
-
-                        self.label_info = gtk.Label()
-                        self.label_info.set_size_request(300,-1)
-                        self.label_info.set_selectable(True)
-                        self.label_info.set_markup(binb)
-                        self.label_info.set_property("xalign", 0)
-                        self.label_info.set_line_wrap(True)
-                        
-                        self.vbox.add(self.label_short)
-                        self.vbox.add(self.label_info)
-
-                ################################ DESCRIPTION TAG ROW #################################################
-                
-                self.label_short = gtk.Label()
-                self.label_short.set_line_wrap(True)
-                self.label_short.set_markup("<span weight=\"bold\">Description </span>")
-                self.label_short.set_property("xalign", 0)
-                self.vbox.add(self.label_short)
-                
-                ################################ DESCRIPTION INFORMATION ROW ##########################################
-                
-                hbox = gtk.HBox(True,spacing = 0)
-
-                self.label_short = gtk.Label()
-                self.label_short.set_size_request(300,-1)
-                self.label_short.set_selectable(True)                
-                self.label_short.set_text(description)
-                self.label_short.set_line_wrap(True)
-                self.label_short.set_property("xalign", 0)
-                self.vbox.add(self.label_short)
-
-                self.vbox.show_all()

bitbake/lib/bb/ui/crumbs/hig/proxydetailsdialog.py

@@ -1,90 +0,0 @@
-#
-# BitBake Graphical GTK User Interface
-#
-# Copyright (C) 2011-2012   Intel Corporation
-#
-# Authored by Joshua Lock <josh@linux.intel.com>
-# Authored by Dongxiao Xu <dongxiao.xu@intel.com>
-# Authored by Shane Wang <shane.wang@intel.com>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-import gtk
-from bb.ui.crumbs.hig.crumbsdialog import CrumbsDialog
-
-"""
-The following are convenience classes for implementing GNOME HIG compliant
-BitBake GUI's
-In summary: spacing = 12px, border-width = 6px
-"""
-
-class ProxyDetailsDialog (CrumbsDialog):
-
-    def __init__(self, title, user, passwd, parent, flags, buttons=None):
-        super(ProxyDetailsDialog, self).__init__(title, parent, flags, buttons)
-        self.connect("response", self.response_cb)
-
-        self.auth = not (user == None or passwd == None or user == "")
-        self.user = user or ""
-        self.passwd = passwd or ""
-
-        # create visual elements on the dialog
-        self.create_visual_elements()
-
-    def create_visual_elements(self):
-        self.auth_checkbox = gtk.CheckButton("Use authentication")
-        self.auth_checkbox.set_tooltip_text("Check this box to set the username and the password")
-        self.auth_checkbox.set_active(self.auth)
-        self.auth_checkbox.connect("toggled", self.auth_checkbox_toggled_cb)
-        self.vbox.pack_start(self.auth_checkbox, expand=False, fill=False)
-
-        hbox = gtk.HBox(False, 6)
-        self.user_label = gtk.Label("Username:")
-        self.user_text = gtk.Entry()
-        self.user_text.set_text(self.user)
-        hbox.pack_start(self.user_label, expand=False, fill=False)
-        hbox.pack_end(self.user_text, expand=False, fill=False)
-        self.vbox.pack_start(hbox, expand=False, fill=False)
-
-        hbox = gtk.HBox(False, 6)
-        self.passwd_label = gtk.Label("Password:")
-        self.passwd_text = gtk.Entry()
-        self.passwd_text.set_text(self.passwd)
-        hbox.pack_start(self.passwd_label, expand=False, fill=False)
-        hbox.pack_end(self.passwd_text, expand=False, fill=False)
-        self.vbox.pack_start(hbox, expand=False, fill=False)
-
-        self.refresh_auth_components()
-        self.show_all()
-
-    def refresh_auth_components(self):
-        self.user_label.set_sensitive(self.auth)
-        self.user_text.set_editable(self.auth)
-        self.user_text.set_sensitive(self.auth)
-        self.passwd_label.set_sensitive(self.auth)
-        self.passwd_text.set_editable(self.auth)
-        self.passwd_text.set_sensitive(self.auth)
-
-    def auth_checkbox_toggled_cb(self, button):
-        self.auth = self.auth_checkbox.get_active()
-        self.refresh_auth_components()
-
-    def response_cb(self, dialog, response_id):
-        if response_id == gtk.RESPONSE_OK:
-            if self.auth:
-                self.user = self.user_text.get_text()
-                self.passwd = self.passwd_text.get_text()
-            else:
-                self.user = None
-                self.passwd = None

bitbake/lib/bb/ui/crumbs/hig/settingsuihelper.py

@@ -1,122 +0,0 @@
-#
-# BitBake Graphical GTK User Interface
-#
-# Copyright (C) 2011-2012   Intel Corporation
-#
-# Authored by Joshua Lock <josh@linux.intel.com>
-# Authored by Dongxiao Xu <dongxiao.xu@intel.com>
-# Authored by Shane Wang <shane.wang@intel.com>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-import gtk
-import os
-from bb.ui.crumbs.hobwidget import HobInfoButton, HobButton, HobAltButton
-
-"""
-The following are convenience classes for implementing GNOME HIG compliant
-BitBake GUI's
-In summary: spacing = 12px, border-width = 6px
-"""
-
-class SettingsUIHelper():
-
-    def gen_label_widget(self, content):
-        label = gtk.Label()
-        label.set_alignment(0, 0)
-        label.set_markup(content)
-        label.show()
-        return label
-
-    def gen_label_info_widget(self, content, tooltip):
-        table = gtk.Table(1, 10, False)
-        label = self.gen_label_widget(content)
-        info = HobInfoButton(tooltip, self)
-        table.attach(label, 0, 1, 0, 1, xoptions=gtk.FILL)
-        table.attach(info, 1, 2, 0, 1, xoptions=gtk.FILL, xpadding=10)
-        return table
-
-    def gen_spinner_widget(self, content, lower, upper, tooltip=""):
-        hbox = gtk.HBox(False, 12)
-        adjust = gtk.Adjustment(value=content, lower=lower, upper=upper, step_incr=1)
-        spinner = gtk.SpinButton(adjustment=adjust, climb_rate=1, digits=0)
-
-        spinner.set_value(content)
-        hbox.pack_start(spinner, expand=False, fill=False)
-
-        info = HobInfoButton(tooltip, self)
-        hbox.pack_start(info, expand=False, fill=False)
-
-        hbox.show_all()
-        return hbox, spinner
-
-    def gen_combo_widget(self, curr_item, all_item, tooltip=""):
-        hbox = gtk.HBox(False, 12)
-        combo = gtk.combo_box_new_text()
-        hbox.pack_start(combo, expand=False, fill=False)
-
-        index = 0
-        for item in all_item or []:
-            combo.append_text(item)
-            if item == curr_item:
-                combo.set_active(index)
-            index += 1
-
-        info = HobInfoButton(tooltip, self)
-        hbox.pack_start(info, expand=False, fill=False)
-
-        hbox.show_all()
-        return hbox, combo
-
-    def entry_widget_select_path_cb(self, action, parent, entry):
-        dialog = gtk.FileChooserDialog("", parent,
-                                       gtk.FILE_CHOOSER_ACTION_SELECT_FOLDER)
-        text = entry.get_text()
-        dialog.set_current_folder(text if len(text) > 0 else os.getcwd())
-        button = dialog.add_button("Cancel", gtk.RESPONSE_NO)
-        HobAltButton.style_button(button)
-        button = dialog.add_button("Open", gtk.RESPONSE_YES)
-        HobButton.style_button(button)
-        response = dialog.run()
-        if response == gtk.RESPONSE_YES:
-            path = dialog.get_filename()
-            entry.set_text(path)
-
-        dialog.destroy()
-
-    def gen_entry_widget(self, content, parent, tooltip="", need_button=True):
-        hbox = gtk.HBox(False, 12)
-        entry = gtk.Entry()
-        entry.set_text(content)
-        entry.set_size_request(350,30)
-
-        if need_button:
-            table = gtk.Table(1, 10, False)
-            hbox.pack_start(table, expand=True, fill=True)
-            table.attach(entry, 0, 9, 0, 1, xoptions=gtk.SHRINK)
-            image = gtk.Image()
-            image.set_from_stock(gtk.STOCK_OPEN,gtk.ICON_SIZE_BUTTON)
-            open_button = gtk.Button()
-            open_button.set_image(image)
-            open_button.connect("clicked", self.entry_widget_select_path_cb, parent, entry)
-            table.attach(open_button, 9, 10, 0, 1, xoptions=gtk.SHRINK)
-        else:
-            hbox.pack_start(entry, expand=True, fill=True)
-
-        if tooltip != "":
-            info = HobInfoButton(tooltip, self)
-            hbox.pack_start(info, expand=False, fill=False)
-
-        hbox.show_all()
-        return hbox, entry

bitbake/lib/bb/ui/crumbs/hig/simplesettingsdialog.py

@@ -1,900 +0,0 @@
-#
-# BitBake Graphical GTK User Interface
-#
-# Copyright (C) 2011-2012   Intel Corporation
-#
-# Authored by Joshua Lock <josh@linux.intel.com>
-# Authored by Dongxiao Xu <dongxiao.xu@intel.com>
-# Authored by Shane Wang <shane.wang@intel.com>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-import gtk
-import gobject
-import hashlib
-from bb.ui.crumbs.hobwidget import hic, HobInfoButton, HobButton, HobAltButton 
-from bb.ui.crumbs.progressbar import HobProgressBar
-from bb.ui.crumbs.hig.settingsuihelper import SettingsUIHelper
-from bb.ui.crumbs.hig.crumbsdialog import CrumbsDialog
-from bb.ui.crumbs.hig.crumbsmessagedialog import CrumbsMessageDialog
-from bb.ui.crumbs.hig.proxydetailsdialog import ProxyDetailsDialog
-
-"""
-The following are convenience classes for implementing GNOME HIG compliant
-BitBake GUI's
-In summary: spacing = 12px, border-width = 6px
-"""
-
-class SimpleSettingsDialog (CrumbsDialog, SettingsUIHelper):
-
-    (BUILD_ENV_PAGE_ID,
-     SHARED_STATE_PAGE_ID,
-     PROXIES_PAGE_ID,
-     OTHERS_PAGE_ID) = range(4)
-
-    (TEST_NETWORK_NONE,
-     TEST_NETWORK_INITIAL,
-     TEST_NETWORK_RUNNING,
-     TEST_NETWORK_PASSED,
-     TEST_NETWORK_FAILED,
-     TEST_NETWORK_CANCELED) = range(6)
-
-    TARGETS = [
-        ("MY_TREE_MODEL_ROW", gtk.TARGET_SAME_WIDGET, 0),
-        ("text/plain", 0, 1),
-        ("TEXT", 0, 2),
-        ("STRING", 0, 3),
-        ]
-
-    def __init__(self, title, configuration, all_image_types,
-            all_package_formats, all_distros, all_sdk_machines,
-            max_threads, parent, flags, handler, buttons=None):
-        super(SimpleSettingsDialog, self).__init__(title, parent, flags, buttons)
-
-        # class members from other objects
-        # bitbake settings from Builder.Configuration
-        self.configuration = configuration
-        self.image_types = all_image_types
-        self.all_package_formats = all_package_formats
-        self.all_distros = all_distros
-        self.all_sdk_machines = all_sdk_machines
-        self.max_threads = max_threads
-
-        # class members for internal use
-        self.dldir_text = None
-        self.sstatedir_text = None
-        self.sstatemirrors_list = []
-        self.sstatemirrors_changed = 0
-        self.bb_spinner = None
-        self.pmake_spinner = None
-        self.rootfs_size_spinner = None
-        self.extra_size_spinner = None
-        self.gplv3_checkbox = None
-        self.toolchain_checkbox = None
-        self.setting_store = None
-        self.image_types_checkbuttons = {}
-
-        self.md5 = self.config_md5()
-        self.proxy_md5 = self.config_proxy_md5()
-        self.settings_changed = False
-        self.proxy_settings_changed = False
-        self.handler = handler
-        self.proxy_test_ran = False
-        self.selected_mirror_row = 0
-        self.new_mirror = False
-
-        # create visual elements on the dialog
-        self.create_visual_elements()
-        self.connect("response", self.response_cb)
-
-    def _get_sorted_value(self, var):
-        return " ".join(sorted(str(var).split())) + "\n"
-
-    def config_proxy_md5(self):
-        data = ("ENABLE_PROXY: "         + self._get_sorted_value(self.configuration.enable_proxy))
-        if self.configuration.enable_proxy:
-            for protocol in self.configuration.proxies.keys():
-                data += (protocol + ": " + self._get_sorted_value(self.configuration.combine_proxy(protocol)))
-        return hashlib.md5(data).hexdigest()
-
-    def config_md5(self):
-        data = ""
-        for key in self.configuration.extra_setting.keys():
-            data += (key + ": " + self._get_sorted_value(self.configuration.extra_setting[key]))
-        return hashlib.md5(data).hexdigest()
-
-    def gen_proxy_entry_widget(self, protocol, parent, need_button=True, line=0):
-        label = gtk.Label(protocol.upper() + " proxy")
-        self.proxy_table.attach(label, 0, 1, line, line+1, xpadding=24)
-
-        proxy_entry = gtk.Entry()
-        proxy_entry.set_size_request(300, -1)
-        self.proxy_table.attach(proxy_entry, 1, 2, line, line+1, ypadding=4)
-
-        self.proxy_table.attach(gtk.Label(":"), 2, 3, line, line+1, xpadding=12, ypadding=4)
-
-        port_entry = gtk.Entry()
-        port_entry.set_size_request(60, -1)
-        self.proxy_table.attach(port_entry, 3, 4, line, line+1, ypadding=4)
-
-        details_button = HobAltButton("Details")
-        details_button.connect("clicked", self.details_cb, parent, protocol)
-        self.proxy_table.attach(details_button, 4, 5, line, line+1, xpadding=4, yoptions=gtk.EXPAND)
-
-        return proxy_entry, port_entry, details_button
-
-    def refresh_proxy_components(self):
-        self.same_checkbox.set_sensitive(self.configuration.enable_proxy)
-
-        self.http_proxy.set_text(self.configuration.combine_host_only("http"))
-        self.http_proxy.set_editable(self.configuration.enable_proxy)
-        self.http_proxy.set_sensitive(self.configuration.enable_proxy)
-        self.http_proxy_port.set_text(self.configuration.combine_port_only("http"))
-        self.http_proxy_port.set_editable(self.configuration.enable_proxy)
-        self.http_proxy_port.set_sensitive(self.configuration.enable_proxy)
-        self.http_proxy_details.set_sensitive(self.configuration.enable_proxy)
-
-        self.https_proxy.set_text(self.configuration.combine_host_only("https"))
-        self.https_proxy.set_editable(self.configuration.enable_proxy and (not self.configuration.same_proxy))
-        self.https_proxy.set_sensitive(self.configuration.enable_proxy and (not self.configuration.same_proxy))
-        self.https_proxy_port.set_text(self.configuration.combine_port_only("https"))
-        self.https_proxy_port.set_editable(self.configuration.enable_proxy and (not self.configuration.same_proxy))
-        self.https_proxy_port.set_sensitive(self.configuration.enable_proxy and (not self.configuration.same_proxy))
-        self.https_proxy_details.set_sensitive(self.configuration.enable_proxy and (not self.configuration.same_proxy))
-
-        self.ftp_proxy.set_text(self.configuration.combine_host_only("ftp"))
-        self.ftp_proxy.set_editable(self.configuration.enable_proxy and (not self.configuration.same_proxy))
-        self.ftp_proxy.set_sensitive(self.configuration.enable_proxy and (not self.configuration.same_proxy))
-        self.ftp_proxy_port.set_text(self.configuration.combine_port_only("ftp"))
-        self.ftp_proxy_port.set_editable(self.configuration.enable_proxy and (not self.configuration.same_proxy))
-        self.ftp_proxy_port.set_sensitive(self.configuration.enable_proxy and (not self.configuration.same_proxy))
-        self.ftp_proxy_details.set_sensitive(self.configuration.enable_proxy and (not self.configuration.same_proxy))
-
-        self.socks_proxy.set_text(self.configuration.combine_host_only("socks"))
-        self.socks_proxy.set_editable(self.configuration.enable_proxy and (not self.configuration.same_proxy))
-        self.socks_proxy.set_sensitive(self.configuration.enable_proxy and (not self.configuration.same_proxy))
-        self.socks_proxy_port.set_text(self.configuration.combine_port_only("socks"))
-        self.socks_proxy_port.set_editable(self.configuration.enable_proxy and (not self.configuration.same_proxy))
-        self.socks_proxy_port.set_sensitive(self.configuration.enable_proxy and (not self.configuration.same_proxy))
-        self.socks_proxy_details.set_sensitive(self.configuration.enable_proxy and (not self.configuration.same_proxy))
-
-        self.cvs_proxy.set_text(self.configuration.combine_host_only("cvs"))
-        self.cvs_proxy.set_editable(self.configuration.enable_proxy and (not self.configuration.same_proxy))
-        self.cvs_proxy.set_sensitive(self.configuration.enable_proxy and (not self.configuration.same_proxy))
-        self.cvs_proxy_port.set_text(self.configuration.combine_port_only("cvs"))
-        self.cvs_proxy_port.set_editable(self.configuration.enable_proxy and (not self.configuration.same_proxy))
-        self.cvs_proxy_port.set_sensitive(self.configuration.enable_proxy and (not self.configuration.same_proxy))
-        self.cvs_proxy_details.set_sensitive(self.configuration.enable_proxy and (not self.configuration.same_proxy))
-
-        if self.configuration.same_proxy:
-            if self.http_proxy.get_text():
-                [w.set_text(self.http_proxy.get_text()) for w in self.same_proxy_addresses]
-            if self.http_proxy_port.get_text():
-                [w.set_text(self.http_proxy_port.get_text()) for w in self.same_proxy_ports]
-
-    def proxy_checkbox_toggled_cb(self, button):
-        self.configuration.enable_proxy = self.proxy_checkbox.get_active()
-        if not self.configuration.enable_proxy:
-            self.configuration.same_proxy = False
-            self.same_checkbox.set_active(self.configuration.same_proxy)
-        self.save_proxy_data()
-        self.refresh_proxy_components()
-
-    def same_checkbox_toggled_cb(self, button):
-        self.configuration.same_proxy = self.same_checkbox.get_active()
-        self.save_proxy_data()
-        self.refresh_proxy_components()
-
-    def save_proxy_data(self):
-        self.configuration.split_proxy("http", self.http_proxy.get_text() + ":" + self.http_proxy_port.get_text())
-        if self.configuration.same_proxy:
-            self.configuration.split_proxy("https", self.http_proxy.get_text() + ":" + self.http_proxy_port.get_text())
-            self.configuration.split_proxy("ftp", self.http_proxy.get_text() + ":" + self.http_proxy_port.get_text())
-            self.configuration.split_proxy("socks", self.http_proxy.get_text() + ":" + self.http_proxy_port.get_text())
-            self.configuration.split_proxy("cvs", self.http_proxy.get_text() + ":" + self.http_proxy_port.get_text())
-        else:
-            self.configuration.split_proxy("https", self.https_proxy.get_text() + ":" + self.https_proxy_port.get_text())
-            self.configuration.split_proxy("ftp", self.ftp_proxy.get_text() + ":" + self.ftp_proxy_port.get_text())
-            self.configuration.split_proxy("socks", self.socks_proxy.get_text() + ":" + self.socks_proxy_port.get_text())
-            self.configuration.split_proxy("cvs", self.cvs_proxy.get_text() + ":" + self.cvs_proxy_port.get_text())       
-
-    def response_cb(self, dialog, response_id):
-        if response_id == gtk.RESPONSE_YES:
-            # Check that all proxy entries have a corresponding port
-            for proxy, port in zip(self.all_proxy_addresses, self.all_proxy_ports):
-                if proxy.get_text() and not port.get_text():
-                    lbl = "<b>Enter all port numbers</b>\n\n"
-                    msg = "Proxy servers require a port number. Please make sure you have entered a port number for each proxy server."
-                    dialog = CrumbsMessageDialog(self, lbl, gtk.STOCK_DIALOG_WARNING, msg)
-                    button = dialog.add_button("Close", gtk.RESPONSE_OK)
-                    HobButton.style_button(button)
-                    response = dialog.run()
-                    dialog.destroy()
-                    self.emit_stop_by_name("response")
-                    return
-
-        self.configuration.dldir = self.dldir_text.get_text()
-        self.configuration.sstatedir = self.sstatedir_text.get_text()
-        self.configuration.sstatemirror = ""
-        for mirror in self.sstatemirrors_list:
-            if mirror[1] != "" and mirror[2].startswith("file://"):
-                if mirror[1].endswith("\\1"):
-                    smirror = mirror[2] + " " + mirror[1] + " \\n "
-                else:
-                    smirror = mirror[2] + " " + mirror[1] + "\\1 \\n "
-                self.configuration.sstatemirror += smirror
-        self.configuration.bbthread = self.bb_spinner.get_value_as_int()
-        self.configuration.pmake = self.pmake_spinner.get_value_as_int()
-        self.save_proxy_data()
-        self.configuration.extra_setting = {}
-        it = self.setting_store.get_iter_first()
-        while it:
-            key = self.setting_store.get_value(it, 0)
-            value = self.setting_store.get_value(it, 1)
-            self.configuration.extra_setting[key] = value
-            it = self.setting_store.iter_next(it)
-
-        md5 = self.config_md5()
-        self.settings_changed = (self.md5 != md5)
-        self.proxy_settings_changed = (self.proxy_md5 != self.config_proxy_md5())
-
-    def create_build_environment_page(self):
-        advanced_vbox = gtk.VBox(False, 6)
-        advanced_vbox.set_border_width(6)
-
-        advanced_vbox.pack_start(self.gen_label_widget('<span weight="bold">Parallel threads</span>'), expand=False, fill=False)
-        sub_vbox = gtk.VBox(False, 6)
-        advanced_vbox.pack_start(sub_vbox, expand=False, fill=False)
-        label = self.gen_label_widget("BitBake parallel threads")
-        tooltip = "Sets the number of threads that BitBake tasks can simultaneously run. See the <a href=\""
-        tooltip += "http://www.yoctoproject.org/docs/current/poky-ref-manual/"
-        tooltip += "poky-ref-manual.html#var-BB_NUMBER_THREADS\">Poky reference manual</a> for information"
-        bbthread_widget, self.bb_spinner = self.gen_spinner_widget(self.configuration.bbthread, 1, self.max_threads,"<b>BitBake prallalel threads</b>" + "*" + tooltip)
-        sub_vbox.pack_start(label, expand=False, fill=False)
-        sub_vbox.pack_start(bbthread_widget, expand=False, fill=False)
-
-        sub_vbox = gtk.VBox(False, 6)
-        advanced_vbox.pack_start(sub_vbox, expand=False, fill=False)
-        label = self.gen_label_widget("Make parallel threads")
-        tooltip = "Sets the maximum number of threads the host can use during the build. See the <a href=\""
-        tooltip += "http://www.yoctoproject.org/docs/current/poky-ref-manual/"
-        tooltip += "poky-ref-manual.html#var-PARALLEL_MAKE\">Poky reference manual</a> for information"
-        pmake_widget, self.pmake_spinner = self.gen_spinner_widget(self.configuration.pmake, 1, self.max_threads,"<b>Make parallel threads</b>" + "*" + tooltip)
-        sub_vbox.pack_start(label, expand=False, fill=False)
-        sub_vbox.pack_start(pmake_widget, expand=False, fill=False)
-
-        advanced_vbox.pack_start(self.gen_label_widget('<span weight="bold">Downloaded source code</span>'), expand=False, fill=False)
-        sub_vbox = gtk.VBox(False, 6)
-        advanced_vbox.pack_start(sub_vbox, expand=False, fill=False)
-        label = self.gen_label_widget("Downloads directory")
-        tooltip = "Select a folder that caches the upstream project source code"
-        dldir_widget, self.dldir_text = self.gen_entry_widget(self.configuration.dldir, self,"<b>Downloaded source code</b>" + "*" + tooltip)
-        sub_vbox.pack_start(label, expand=False, fill=False)
-        sub_vbox.pack_start(dldir_widget, expand=False, fill=False)
-
-        return advanced_vbox
-
-    def create_shared_state_page(self):
-        advanced_vbox = gtk.VBox(False)
-        advanced_vbox.set_border_width(12)
-
-        sub_vbox = gtk.VBox(False)
-        advanced_vbox.pack_start(sub_vbox, expand=False, fill=False, padding=24)
-        content = "<span>Shared state directory</span>"
-        tooltip = "Select a folder that caches your prebuilt results"
-        label = self.gen_label_info_widget(content,"<b>Shared state directory</b>" + "*" + tooltip)
-        sstatedir_widget, self.sstatedir_text = self.gen_entry_widget(self.configuration.sstatedir, self)
-        sub_vbox.pack_start(label, expand=False, fill=False)
-        sub_vbox.pack_start(sstatedir_widget, expand=False, fill=False, padding=6)
-
-        content = "<span weight=\"bold\">Shared state mirrors</span>"
-        tooltip = "URLs pointing to pre-built mirrors that will speed your build. "
-        tooltip += "Select the \'Standard\' configuration if the structure of your "
-        tooltip += "mirror replicates the structure of your local shared state directory. "
-        tooltip += "For more information on shared state mirrors, check the <a href=\""
-        tooltip += "http://www.yoctoproject.org/docs/current/poky-ref-manual/"
-        tooltip += "poky-ref-manual.html#shared-state\">Yocto Project Reference Manual</a>."
-        table = self.gen_label_info_widget(content,"<b>Shared state mirrors</b>" + "*" + tooltip)
-        advanced_vbox.pack_start(table, expand=False, fill=False, padding=6)
-
-        sub_vbox = gtk.VBox(False)
-        advanced_vbox.pack_start(sub_vbox, gtk.TRUE, gtk.TRUE, 0)
-        searched_string = "file://"
-
-        if self.sstatemirrors_changed == 0:
-            self.sstatemirrors_changed = 1
-            sstatemirrors = self.configuration.sstatemirror
-            if sstatemirrors == "":
-                sm_list = ["Standard", "", "file://(.*)"]
-                self.sstatemirrors_list.append(sm_list)
-            else:
-                while sstatemirrors.find(searched_string) != -1:
-                    if sstatemirrors.find(searched_string,1) != -1:
-                        sstatemirror = sstatemirrors[:sstatemirrors.find(searched_string,1)]
-                        sstatemirrors = sstatemirrors[sstatemirrors.find(searched_string,1):]
-                    else:
-                        sstatemirror = sstatemirrors
-                        sstatemirrors = sstatemirrors[1:]
-
-                    sstatemirror_fields = [x for x in sstatemirror.split(' ') if x.strip()]
-                    if len(sstatemirror_fields):
-                        if sstatemirror_fields[0] == "file://(.*)":
-                            sm_list = ["Standard", sstatemirror_fields[1], "file://(.*)"]
-                        else:
-                            sm_list = ["Custom", sstatemirror_fields[1], sstatemirror_fields[0]]
-                        self.sstatemirrors_list.append(sm_list)
-
-        sstatemirrors_widget, sstatemirrors_store = self.gen_shared_sstate_widget(self.sstatemirrors_list, self)
-        sub_vbox.pack_start(sstatemirrors_widget, expand=True, fill=True)
-
-        table = gtk.Table(1, 10, False)
-        table.set_col_spacings(6)
-        add_mirror_button = HobAltButton("Add mirror")
-        add_mirror_button.connect("clicked", self.add_mirror)
-        add_mirror_button.set_size_request(120,30)
-        table.attach(add_mirror_button, 1, 2, 0, 1, xoptions=gtk.SHRINK)
-
-        self.delete_button = HobAltButton("Delete mirror")
-        self.delete_button.connect("clicked", self.delete_cb)
-        self.delete_button.set_size_request(120, 30)
-        table.attach(self.delete_button, 3, 4, 0, 1, xoptions=gtk.SHRINK)
-
-        advanced_vbox.pack_start(table, expand=False, fill=False, padding=6)
-
-        return advanced_vbox
-
-    def gen_shared_sstate_widget(self, sstatemirrors_list, window):
-        hbox = gtk.HBox(False)
-
-        sstatemirrors_store = gtk.ListStore(str, str, str)
-        for sstatemirror in sstatemirrors_list:
-            sstatemirrors_store.append(sstatemirror)
-
-        self.sstatemirrors_tv = gtk.TreeView()
-        self.sstatemirrors_tv.set_rules_hint(True)
-        self.sstatemirrors_tv.set_headers_visible(True)
-        tree_selection = self.sstatemirrors_tv.get_selection()
-        tree_selection.set_mode(gtk.SELECTION_SINGLE)
-
-        # Allow enable drag and drop of rows including row move
-        self.sstatemirrors_tv.enable_model_drag_source( gtk.gdk.BUTTON1_MASK,
-            self.TARGETS,
-            gtk.gdk.ACTION_DEFAULT|
-            gtk.gdk.ACTION_MOVE)
-        self.sstatemirrors_tv.enable_model_drag_dest(self.TARGETS,
-            gtk.gdk.ACTION_DEFAULT)
-        self.sstatemirrors_tv.connect("drag_data_get", self.drag_data_get_cb)
-        self.sstatemirrors_tv.connect("drag_data_received", self.drag_data_received_cb)
-
-
-        self.scroll = gtk.ScrolledWindow()
-        self.scroll.set_policy(gtk.POLICY_NEVER, gtk.POLICY_AUTOMATIC)
-        self.scroll.set_shadow_type(gtk.SHADOW_IN)
-        self.scroll.connect('size-allocate', self.scroll_changed)
-        self.scroll.add(self.sstatemirrors_tv)
-
-        #list store for cell renderer
-        m = gtk.ListStore(gobject.TYPE_STRING)
-        m.append(["Standard"])
-        m.append(["Custom"])
-
-        cell0 = gtk.CellRendererCombo()
-        cell0.set_property("model",m)
-        cell0.set_property("text-column", 0)
-        cell0.set_property("editable", True)
-        cell0.set_property("has-entry", False)
-        col0 = gtk.TreeViewColumn("Configuration")
-        col0.pack_start(cell0, False)
-        col0.add_attribute(cell0, "text", 0)
-        col0.set_cell_data_func(cell0, self.configuration_field)
-        self.sstatemirrors_tv.append_column(col0)
-
-        cell0.connect("edited", self.combo_changed, sstatemirrors_store)
-
-        self.cell1 = gtk.CellRendererText()
-        self.cell1.set_padding(5,2)
-        col1 = gtk.TreeViewColumn('Regex', self.cell1)
-        col1.set_cell_data_func(self.cell1, self.regex_field)
-        self.sstatemirrors_tv.append_column(col1)
-
-        self.cell1.connect("edited", self.regex_changed, sstatemirrors_store)
-
-        cell2 = gtk.CellRendererText()
-        cell2.set_padding(5,2)
-        cell2.set_property("editable", True)
-        col2 = gtk.TreeViewColumn('URL', cell2)
-        col2.set_cell_data_func(cell2, self.url_field)
-        self.sstatemirrors_tv.append_column(col2)
-
-        cell2.connect("edited", self.url_changed, sstatemirrors_store)
-
-        self.sstatemirrors_tv.set_model(sstatemirrors_store)
-        self.sstatemirrors_tv.set_cursor(self.selected_mirror_row)
-        hbox.pack_start(self.scroll, expand=True, fill=True)
-        hbox.show_all()
-
-        return hbox, sstatemirrors_store
-
-    def drag_data_get_cb(self, treeview, context, selection, target_id, etime):
-        treeselection = treeview.get_selection()
-        model, iter = treeselection.get_selected()
-        data = model.get_string_from_iter(iter)
-        selection.set(selection.target, 8, data)
-
-    def drag_data_received_cb(self, treeview, context, x, y, selection, info, etime):
-        model = treeview.get_model()
-        data = []
-        tree_iter = model.get_iter_from_string(selection.data)
-        data.append(model.get_value(tree_iter, 0))
-        data.append(model.get_value(tree_iter, 1))
-        data.append(model.get_value(tree_iter, 2))
-
-        drop_info = treeview.get_dest_row_at_pos(x, y)
-        if drop_info:
-            path, position = drop_info
-            iter = model.get_iter(path)
-            if (position == gtk.TREE_VIEW_DROP_BEFORE or position == gtk.TREE_VIEW_DROP_INTO_OR_BEFORE):
-                model.insert_before(iter, data)
-            else:
-                model.insert_after(iter, data)
-        else:
-            model.append(data)
-        if context.action == gtk.gdk.ACTION_MOVE:
-            context.finish(True, True, etime)
-        return
-
-    def delete_cb(self, button):
-        selection = self.sstatemirrors_tv.get_selection()
-        tree_model, tree_iter = selection.get_selected()
-        index = int(tree_model.get_string_from_iter(tree_iter))
-        if index == 0:
-            self.selected_mirror_row = index
-        else:
-            self.selected_mirror_row = index - 1
-        self.sstatemirrors_list.pop(index)
-        self.refresh_shared_state_page()
-        if not self.sstatemirrors_list:
-            self.delete_button.set_sensitive(False)
-
-    def add_mirror(self, button):
-        self.new_mirror = True
-        tooltip = "Select the pre-built mirror that will speed your build"
-        index = len(self.sstatemirrors_list)
-        self.selected_mirror_row = index
-        sm_list = ["Standard", "", "file://(.*)"]
-        self.sstatemirrors_list.append(sm_list)
-        self.refresh_shared_state_page()
-
-    def scroll_changed(self, widget, event, data=None):
-        if self.new_mirror == True:
-            adj = widget.get_vadjustment()
-            adj.set_value(adj.upper - adj.page_size)
-            self.new_mirror = False
-
-    def combo_changed(self, widget, path, text, model):
-        model[path][0] = text
-        selection = self.sstatemirrors_tv.get_selection()
-        tree_model, tree_iter = selection.get_selected()
-        index = int(tree_model.get_string_from_iter(tree_iter))
-        self.sstatemirrors_list[index][0] = text
-
-    def regex_changed(self, cell, path, new_text, user_data):
-        user_data[path][2] = new_text
-        selection = self.sstatemirrors_tv.get_selection()
-        tree_model, tree_iter = selection.get_selected()
-        index = int(tree_model.get_string_from_iter(tree_iter))
-        self.sstatemirrors_list[index][2] = new_text
-        return
-
-    def url_changed(self, cell, path, new_text, user_data):
-        if new_text!="Enter the mirror URL" and new_text!="Match regex and replace it with this URL":
-            user_data[path][1] = new_text
-            selection = self.sstatemirrors_tv.get_selection()
-            tree_model, tree_iter = selection.get_selected()
-            index = int(tree_model.get_string_from_iter(tree_iter))
-            self.sstatemirrors_list[index][1] = new_text
-        return
-
-    def configuration_field(self, column, cell, model, iter):
-        cell.set_property('text', model.get_value(iter, 0))
-        if model.get_value(iter, 0) == "Standard":
-            self.cell1.set_property("sensitive", False)
-            self.cell1.set_property("editable", False)
-        else:
-            self.cell1.set_property("sensitive", True)
-            self.cell1.set_property("editable", True)
-        return
-
-    def regex_field(self, column, cell, model, iter):
-        cell.set_property('text', model.get_value(iter, 2))
-        return
-
-    def url_field(self, column, cell, model, iter):
-        text = model.get_value(iter, 1)
-        if text == "":
-            if model.get_value(iter, 0) == "Standard":
-                text = "Enter the mirror URL"
-            else:
-                text = "Match regex and replace it with this URL"
-        cell.set_property('text', text)
-        return
-
-    def refresh_shared_state_page(self):
-        page_num = self.nb.get_current_page()
-        self.nb.remove_page(page_num);
-        self.nb.insert_page(self.create_shared_state_page(), gtk.Label("Shared state"),page_num)
-        self.show_all()
-        self.nb.set_current_page(page_num)
-
-    def test_proxy_ended(self, passed):
-        self.proxy_test_running = False
-        self.set_test_proxy_state(self.TEST_NETWORK_PASSED if passed else self.TEST_NETWORK_FAILED)
-        self.set_sensitive(True)
-        self.refresh_proxy_components()
-
-    def timer_func(self):
-        self.test_proxy_progress.pulse()
-        return self.proxy_test_running
-
-    def test_network_button_cb(self, b):
-        self.set_test_proxy_state(self.TEST_NETWORK_RUNNING)
-        self.set_sensitive(False)
-        self.save_proxy_data()
-        if self.configuration.enable_proxy == True:
-            self.handler.set_http_proxy(self.configuration.combine_proxy("http"))
-            self.handler.set_https_proxy(self.configuration.combine_proxy("https"))
-            self.handler.set_ftp_proxy(self.configuration.combine_proxy("ftp"))
-            self.handler.set_socks_proxy(self.configuration.combine_proxy("socks"))
-            self.handler.set_cvs_proxy(self.configuration.combine_host_only("cvs"), self.configuration.combine_port_only("cvs"))
-        elif self.configuration.enable_proxy == False:
-            self.handler.set_http_proxy("")
-            self.handler.set_https_proxy("")
-            self.handler.set_ftp_proxy("")
-            self.handler.set_socks_proxy("")
-            self.handler.set_cvs_proxy("", "")
-        self.proxy_test_ran = True
-        self.proxy_test_running = True
-        gobject.timeout_add(100, self.timer_func)
-        self.handler.trigger_network_test()
-
-    def test_proxy_focus_event(self, w, direction):
-        if self.test_proxy_state in [self.TEST_NETWORK_PASSED, self.TEST_NETWORK_FAILED]:
-            self.set_test_proxy_state(self.TEST_NETWORK_INITIAL)
-        return False
-
-    def http_proxy_changed(self, e):
-        if not self.configuration.same_proxy:
-            return
-        if e == self.http_proxy:
-            [w.set_text(self.http_proxy.get_text()) for w in self.same_proxy_addresses]
-        else:
-            [w.set_text(self.http_proxy_port.get_text()) for w in self.same_proxy_ports]
-
-    def proxy_address_focus_out_event(self, w, direction):
-        text = w.get_text()
-        if not text:
-            return False
-        if text.find("//") == -1:
-            w.set_text("http://" + text)
-        return False
-
-    def set_test_proxy_state(self, state):
-        if self.test_proxy_state == state:
-            return
-        [self.proxy_table.remove(w) for w in self.test_gui_elements]
-        if state == self.TEST_NETWORK_INITIAL:
-            self.proxy_table.attach(self.test_network_button, 1, 2, 5, 6)
-            self.test_network_button.show()
-        elif state == self.TEST_NETWORK_RUNNING:
-            self.test_proxy_progress.set_rcstyle("running")
-            self.test_proxy_progress.set_text("Testing network configuration")
-            self.proxy_table.attach(self.test_proxy_progress, 0, 5, 5, 6, xpadding=4)
-            self.test_proxy_progress.show()
-        else: # passed or failed
-            self.dummy_progress.update(1.0)
-            if state == self.TEST_NETWORK_PASSED:
-                self.dummy_progress.set_text("Your network is properly configured")
-                self.dummy_progress.set_rcstyle("running")
-            else:
-                self.dummy_progress.set_text("Network test failed")
-                self.dummy_progress.set_rcstyle("fail")
-            self.proxy_table.attach(self.dummy_progress, 0, 4, 5, 6)
-            self.proxy_table.attach(self.retest_network_button, 4, 5, 5, 6, xpadding=4)
-            self.dummy_progress.show()
-            self.retest_network_button.show()
-        self.test_proxy_state = state
-
-    def create_network_page(self):
-        advanced_vbox = gtk.VBox(False, 6)
-        advanced_vbox.set_border_width(6)
-        self.same_proxy_addresses = []
-        self.same_proxy_ports = []
-        self.all_proxy_ports = []
-        self.all_proxy_addresses = []
-
-        sub_vbox = gtk.VBox(False, 6)
-        advanced_vbox.pack_start(sub_vbox, expand=False, fill=False)
-        label = self.gen_label_widget("<span weight=\"bold\">Set the proxies used when fetching source code</span>")
-        tooltip = "Set the proxies used when fetching source code.  A blank field uses a direct internet connection."
-        info = HobInfoButton("<span weight=\"bold\">Set the proxies used when fetching source code</span>" + "*" + tooltip, self)
-        hbox = gtk.HBox(False, 12)
-        hbox.pack_start(label, expand=True, fill=True)
-        hbox.pack_start(info, expand=False, fill=False)
-        sub_vbox.pack_start(hbox, expand=False, fill=False)
-
-        proxy_test_focus = []
-        self.direct_checkbox = gtk.RadioButton(None, "Direct network connection")
-        proxy_test_focus.append(self.direct_checkbox)
-        self.direct_checkbox.set_tooltip_text("Check this box to use a direct internet connection with no proxy")
-        self.direct_checkbox.set_active(not self.configuration.enable_proxy)
-        sub_vbox.pack_start(self.direct_checkbox, expand=False, fill=False)
-
-        self.proxy_checkbox = gtk.RadioButton(self.direct_checkbox, "Manual proxy configuration")
-        proxy_test_focus.append(self.proxy_checkbox)
-        self.proxy_checkbox.set_tooltip_text("Check this box to manually set up a specific proxy")
-        self.proxy_checkbox.set_active(self.configuration.enable_proxy)
-        sub_vbox.pack_start(self.proxy_checkbox, expand=False, fill=False)
-
-        self.same_checkbox = gtk.CheckButton("Use the HTTP proxy for all protocols")
-        proxy_test_focus.append(self.same_checkbox)
-        self.same_checkbox.set_tooltip_text("Check this box to use the HTTP proxy for all five proxies")
-        self.same_checkbox.set_active(self.configuration.same_proxy)
-        hbox = gtk.HBox(False, 12)
-        hbox.pack_start(self.same_checkbox, expand=False, fill=False, padding=24)
-        sub_vbox.pack_start(hbox, expand=False, fill=False)
-
-        self.proxy_table = gtk.Table(6, 5, False)
-        self.http_proxy, self.http_proxy_port, self.http_proxy_details = self.gen_proxy_entry_widget(
-            "http", self, True, 0)
-        proxy_test_focus +=[self.http_proxy, self.http_proxy_port]
-        self.http_proxy.connect("changed", self.http_proxy_changed)
-        self.http_proxy_port.connect("changed", self.http_proxy_changed)
-
-        self.https_proxy, self.https_proxy_port, self.https_proxy_details = self.gen_proxy_entry_widget(
-            "https", self, True, 1)
-        proxy_test_focus += [self.https_proxy, self.https_proxy_port]
-        self.same_proxy_addresses.append(self.https_proxy)
-        self.same_proxy_ports.append(self.https_proxy_port)
-
-        self.ftp_proxy, self.ftp_proxy_port, self.ftp_proxy_details = self.gen_proxy_entry_widget(
-            "ftp", self, True, 2)
-        proxy_test_focus += [self.ftp_proxy, self.ftp_proxy_port]
-        self.same_proxy_addresses.append(self.ftp_proxy)
-        self.same_proxy_ports.append(self.ftp_proxy_port)
-
-        self.socks_proxy, self.socks_proxy_port, self.socks_proxy_details = self.gen_proxy_entry_widget(
-            "socks", self, True, 3)
-        proxy_test_focus += [self.socks_proxy, self.socks_proxy_port]
-        self.same_proxy_addresses.append(self.socks_proxy)
-        self.same_proxy_ports.append(self.socks_proxy_port)
-
-        self.cvs_proxy, self.cvs_proxy_port, self.cvs_proxy_details = self.gen_proxy_entry_widget(
-            "cvs", self, True, 4)
-        proxy_test_focus += [self.cvs_proxy, self.cvs_proxy_port]
-        self.same_proxy_addresses.append(self.cvs_proxy)
-        self.same_proxy_ports.append(self.cvs_proxy_port)
-        self.all_proxy_ports = self.same_proxy_ports + [self.http_proxy_port]
-        self.all_proxy_addresses = self.same_proxy_addresses + [self.http_proxy]
-        sub_vbox.pack_start(self.proxy_table, expand=False, fill=False)
-        self.proxy_table.show_all()
-
-        # Create the graphical elements for the network test feature, but don't display them yet
-        self.test_network_button = HobAltButton("Test network configuration")
-        self.test_network_button.connect("clicked", self.test_network_button_cb)
-        self.test_proxy_progress = HobProgressBar()
-        self.dummy_progress = HobProgressBar()
-        self.retest_network_button = HobAltButton("Retest")
-        self.retest_network_button.connect("clicked", self.test_network_button_cb)
-        self.test_gui_elements = [self.test_network_button, self.test_proxy_progress, self.dummy_progress, self.retest_network_button]
-        # Initialize the network tester
-        self.test_proxy_state = self.TEST_NETWORK_NONE
-        self.set_test_proxy_state(self.TEST_NETWORK_INITIAL)
-        self.proxy_test_passed_id = self.handler.connect("network-passed", lambda h:self.test_proxy_ended(True))
-        self.proxy_test_failed_id = self.handler.connect("network-failed", lambda h:self.test_proxy_ended(False))
-        [w.connect("focus-in-event", self.test_proxy_focus_event) for w in proxy_test_focus]
-        [w.connect("focus-out-event", self.proxy_address_focus_out_event) for w in self.all_proxy_addresses]
-
-        self.direct_checkbox.connect("toggled", self.proxy_checkbox_toggled_cb)
-        self.proxy_checkbox.connect("toggled", self.proxy_checkbox_toggled_cb)
-        self.same_checkbox.connect("toggled", self.same_checkbox_toggled_cb)
-
-        self.refresh_proxy_components()
-        return advanced_vbox
-
-    def switch_to_page(self, page_id):
-        self.nb.set_current_page(page_id)
-
-    def details_cb(self, button, parent, protocol):
-        self.save_proxy_data()
-        dialog = ProxyDetailsDialog(title = protocol.upper() + " Proxy Details",
-            user = self.configuration.proxies[protocol][1],
-            passwd = self.configuration.proxies[protocol][2],
-            parent = parent,
-            flags = gtk.DIALOG_MODAL
-                    | gtk.DIALOG_DESTROY_WITH_PARENT
-                    | gtk.DIALOG_NO_SEPARATOR)
-        dialog.add_button(gtk.STOCK_CLOSE, gtk.RESPONSE_OK)
-        response = dialog.run()
-        if response == gtk.RESPONSE_OK:
-            self.configuration.proxies[protocol][1] = dialog.user
-            self.configuration.proxies[protocol][2] = dialog.passwd
-            self.refresh_proxy_components()
-        dialog.destroy()    
-
-    def rootfs_combo_changed_cb(self, rootfs_combo, all_package_format, check_hbox):
-        combo_item = self.rootfs_combo.get_active_text()
-        for child in check_hbox.get_children():
-            if isinstance(child, gtk.CheckButton):
-                check_hbox.remove(child)
-        for format in all_package_format:
-            if format != combo_item:
-                check_button = gtk.CheckButton(format)
-                check_hbox.pack_start(check_button, expand=False, fill=False)
-        check_hbox.show_all()
-
-    def gen_pkgfmt_widget(self, curr_package_format, all_package_format, tooltip_combo="", tooltip_extra=""):
-        pkgfmt_hbox = gtk.HBox(False, 24)
-
-        rootfs_vbox = gtk.VBox(False, 6)
-        pkgfmt_hbox.pack_start(rootfs_vbox, expand=False, fill=False)
-
-        label = self.gen_label_widget("Root file system package format")
-        rootfs_vbox.pack_start(label, expand=False, fill=False)
-
-        rootfs_format = ""
-        if curr_package_format:
-            rootfs_format = curr_package_format.split()[0]
-
-        rootfs_format_widget, rootfs_combo = self.gen_combo_widget(rootfs_format, all_package_format, tooltip_combo)
-        rootfs_vbox.pack_start(rootfs_format_widget, expand=False, fill=False)
-
-        extra_vbox = gtk.VBox(False, 6)
-        pkgfmt_hbox.pack_start(extra_vbox, expand=False, fill=False)
-
-        label = self.gen_label_widget("Additional package formats")
-        extra_vbox.pack_start(label, expand=False, fill=False)
-
-        check_hbox = gtk.HBox(False, 12)
-        extra_vbox.pack_start(check_hbox, expand=False, fill=False)
-        for format in all_package_format:
-            if format != rootfs_format:
-                check_button = gtk.CheckButton(format)
-                is_active = (format in curr_package_format.split())
-                check_button.set_active(is_active)
-                check_hbox.pack_start(check_button, expand=False, fill=False)
-
-        info = HobInfoButton(tooltip_extra, self)
-        check_hbox.pack_end(info, expand=False, fill=False)
-
-        rootfs_combo.connect("changed", self.rootfs_combo_changed_cb, all_package_format, check_hbox)
-
-        pkgfmt_hbox.show_all()
-
-        return pkgfmt_hbox, rootfs_combo, check_hbox
-
-    def editable_settings_cell_edited(self, cell, path_string, new_text, model):
-        it = model.get_iter_from_string(path_string)
-        column = cell.get_data("column")
-        model.set(it, column, new_text)
-
-    def editable_settings_add_item_clicked(self, button, model):
-        new_item = ["##KEY##", "##VALUE##"]
-
-        iter = model.append()
-        model.set (iter,
-            0, new_item[0],
-            1, new_item[1],
-       )
-
-    def editable_settings_remove_item_clicked(self, button, treeview):
-        selection = treeview.get_selection()
-        model, iter = selection.get_selected()
-
-        if iter:
-            path = model.get_path(iter)[0]
-            model.remove(iter)
- 
-    def gen_editable_settings(self, setting, tooltip=""):
-        setting_hbox = gtk.HBox(False, 12)
-
-        vbox = gtk.VBox(False, 12)
-        setting_hbox.pack_start(vbox, expand=True, fill=True)
-
-        setting_store = gtk.ListStore(gobject.TYPE_STRING, gobject.TYPE_STRING)
-        for key in setting.keys():
-            setting_store.set(setting_store.append(), 0, key, 1, setting[key])
-
-        setting_tree = gtk.TreeView(setting_store)
-        setting_tree.set_headers_visible(True)
-        setting_tree.set_size_request(300, 100)
-
-        col = gtk.TreeViewColumn('Key')
-        col.set_min_width(100)
-        col.set_max_width(150)
-        col.set_resizable(True)
-        col1 = gtk.TreeViewColumn('Value')
-        col1.set_min_width(100)
-        col1.set_max_width(150)
-        col1.set_resizable(True)
-        setting_tree.append_column(col)
-        setting_tree.append_column(col1)
-        cell = gtk.CellRendererText()
-        cell.set_property('width-chars', 10)
-        cell.set_property('editable', True)
-        cell.set_data("column", 0)
-        cell.connect("edited", self.editable_settings_cell_edited, setting_store)
-        cell1 = gtk.CellRendererText()
-        cell1.set_property('width-chars', 10)
-        cell1.set_property('editable', True)
-        cell1.set_data("column", 1)
-        cell1.connect("edited", self.editable_settings_cell_edited, setting_store)
-        col.pack_start(cell, True)
-        col1.pack_end(cell1, True)
-        col.set_attributes(cell, text=0)
-        col1.set_attributes(cell1, text=1)
-
-        scroll = gtk.ScrolledWindow()
-        scroll.set_shadow_type(gtk.SHADOW_IN)
-        scroll.set_policy(gtk.POLICY_AUTOMATIC, gtk.POLICY_AUTOMATIC)
-        scroll.add(setting_tree)
-        vbox.pack_start(scroll, expand=True, fill=True)
-
-        # some buttons
-        hbox = gtk.HBox(True, 6)
-        vbox.pack_start(hbox, False, False)
-
-        button = gtk.Button(stock=gtk.STOCK_ADD)
-        button.connect("clicked", self.editable_settings_add_item_clicked, setting_store)
-        hbox.pack_start(button)
-
-        button = gtk.Button(stock=gtk.STOCK_REMOVE)
-        button.connect("clicked", self.editable_settings_remove_item_clicked, setting_tree)
-        hbox.pack_start(button)
-
-        info = HobInfoButton(tooltip, self)
-        setting_hbox.pack_start(info, expand=False, fill=False)
-
-        return setting_hbox, setting_store
-
-    def create_others_page(self):
-        advanced_vbox = gtk.VBox(False, 6)
-        advanced_vbox.set_border_width(6)
-
-        sub_vbox = gtk.VBox(False, 6)
-        advanced_vbox.pack_start(sub_vbox, expand=True, fill=True)
-        label = self.gen_label_widget("<span weight=\"bold\">Add your own variables:</span>")
-        tooltip = "These are key/value pairs for your extra settings. Click \'Add\' and then directly edit the key and the value"
-        setting_widget, self.setting_store = self.gen_editable_settings(self.configuration.extra_setting,"<b>Add your own variables</b>" + "*" + tooltip)
-        sub_vbox.pack_start(label, expand=False, fill=False)
-        sub_vbox.pack_start(setting_widget, expand=True, fill=True)
-
-        return advanced_vbox
-
-    def create_visual_elements(self):
-        self.nb = gtk.Notebook()
-        self.nb.set_show_tabs(True)        
-        self.nb.append_page(self.create_build_environment_page(), gtk.Label("Build environment"))
-        self.nb.append_page(self.create_shared_state_page(), gtk.Label("Shared state"))
-        self.nb.append_page(self.create_network_page(), gtk.Label("Network"))        
-        self.nb.append_page(self.create_others_page(), gtk.Label("Others"))
-        self.nb.set_current_page(0)
-        self.vbox.pack_start(self.nb, expand=True, fill=True)
-        self.vbox.pack_end(gtk.HSeparator(), expand=True, fill=True)
-
-        self.show_all()
-
-    def destroy(self):
-        self.handler.disconnect(self.proxy_test_passed_id)
-        self.handler.disconnect(self.proxy_test_failed_id)
-        super(SimpleSettingsDialog, self).destroy()

bitbake/lib/bb/ui/crumbs/hobcolor.py

@@ -1,38 +0,0 @@
-#
-# BitBake Graphical GTK User Interface
-#
-# Copyright (C) 2012        Intel Corporation
-#
-# Authored by Shane Wang <shane.wang@intel.com>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-class HobColors:
-    WHITE        = "#ffffff"
-    PALE_GREEN   = "#aaffaa"
-    ORANGE       = "#eb8e68"
-    PALE_RED     = "#ffaaaa"
-    GRAY         = "#aaaaaa"
-    LIGHT_GRAY   = "#dddddd"
-    SLIGHT_DARK  = "#5f5f5f"
-    DARK         = "#3c3b37"
-    BLACK        = "#000000"
-    PALE_BLUE    = "#53b8ff"
-    DEEP_RED     = "#aa3e3e"
-    KHAKI        = "#fff68f"
-
-    OK = WHITE
-    RUNNING = PALE_GREEN
-    WARNING = ORANGE
-    ERROR = PALE_RED

bitbake/lib/bb/ui/crumbs/hobeventhandler.py

@@ -4,7 +4,6 @@
 # Copyright (C) 2011        Intel Corporation
 #
 # Authored by Joshua Lock <josh@linux.intel.com>
-# Authored by Dongxiao Xu <dongxiao.xu@intel.com>
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License version 2 as
@@ -20,8 +19,8 @@
 # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 
 import gobject
-import logging
-from bb.ui.crumbs.runningbuild import RunningBuild
+
+progress_total = 0
 
 class HobHandler(gobject.GObject):
 
@@ -29,215 +28,129 @@ class HobHandler(gobject.GObject):
     This object does BitBake event handling for the hob gui.
     """
     __gsignals__ = {
-         "package-formats-updated" : (gobject.SIGNAL_RUN_LAST,
-                                      gobject.TYPE_NONE,
-                                     (gobject.TYPE_PYOBJECT,)),
-         "config-updated"          : (gobject.SIGNAL_RUN_LAST,
-                                      gobject.TYPE_NONE,
-                                     (gobject.TYPE_STRING, gobject.TYPE_PYOBJECT,)),
-         "command-succeeded"       : (gobject.SIGNAL_RUN_LAST,
-                                      gobject.TYPE_NONE,
-                                     (gobject.TYPE_INT,)),
-         "command-failed"          : (gobject.SIGNAL_RUN_LAST,
-                                      gobject.TYPE_NONE,
-                                     (gobject.TYPE_STRING,)),
-         "parsing-warning"         : (gobject.SIGNAL_RUN_LAST,
-                                      gobject.TYPE_NONE,
-                                     (gobject.TYPE_STRING,)),
-         "sanity-failed"           : (gobject.SIGNAL_RUN_LAST,
-                                      gobject.TYPE_NONE,
-                                     (gobject.TYPE_STRING, gobject.TYPE_INT)),
-         "generating-data"         : (gobject.SIGNAL_RUN_LAST,
-                                      gobject.TYPE_NONE,
-                                     ()),
-         "data-generated"          : (gobject.SIGNAL_RUN_LAST,
-                                      gobject.TYPE_NONE,
-                                     ()),
-         "parsing-started"         : (gobject.SIGNAL_RUN_LAST,
-                                      gobject.TYPE_NONE,
-                                     (gobject.TYPE_PYOBJECT,)),
-         "parsing"                 : (gobject.SIGNAL_RUN_LAST,
-                                      gobject.TYPE_NONE,
-                                     (gobject.TYPE_PYOBJECT,)),
-         "parsing-completed"       : (gobject.SIGNAL_RUN_LAST,
-                                      gobject.TYPE_NONE,
-                                     (gobject.TYPE_PYOBJECT,)),
-         "recipe-populated"        : (gobject.SIGNAL_RUN_LAST,
-                                      gobject.TYPE_NONE,
-                                     ()),
-         "package-populated"       : (gobject.SIGNAL_RUN_LAST,
-                                      gobject.TYPE_NONE,
-                                     ()),
-         "network-passed"          : (gobject.SIGNAL_RUN_LAST,
-                                      gobject.TYPE_NONE,
-                                     ()),
-         "network-failed"          : (gobject.SIGNAL_RUN_LAST,
-                                      gobject.TYPE_NONE,
-                                     ()),
+         "machines-updated"    : (gobject.SIGNAL_RUN_LAST,
+                                  gobject.TYPE_NONE,
+                                  (gobject.TYPE_PYOBJECT,)),
+         "sdk-machines-updated": (gobject.SIGNAL_RUN_LAST,
+                                  gobject.TYPE_NONE,
+                                  (gobject.TYPE_PYOBJECT,)),
+         "distros-updated"     : (gobject.SIGNAL_RUN_LAST,
+                                  gobject.TYPE_NONE,
+                                  (gobject.TYPE_PYOBJECT,)),
+         "package-formats-found" : (gobject.SIGNAL_RUN_LAST,
+                                  gobject.TYPE_NONE,
+                                  (gobject.TYPE_PYOBJECT,)),
+         "config-found"        : (gobject.SIGNAL_RUN_LAST,
+                                  gobject.TYPE_NONE,
+                                  (gobject.TYPE_STRING,)),
+         "generating-data"     : (gobject.SIGNAL_RUN_LAST,
+                                  gobject.TYPE_NONE,
+                                  ()),
+         "data-generated"      : (gobject.SIGNAL_RUN_LAST,
+                                  gobject.TYPE_NONE,
+                                  ()),
+         "error"               : (gobject.SIGNAL_RUN_LAST,
+                                  gobject.TYPE_NONE,
+                                  (gobject.TYPE_STRING,)),
+         "reload-triggered"    : (gobject.SIGNAL_RUN_LAST,
+                                  gobject.TYPE_NONE,
+                                  (gobject.TYPE_STRING,
+                                   gobject.TYPE_STRING)),
     }
 
-    (GENERATE_CONFIGURATION, GENERATE_RECIPES, GENERATE_PACKAGES, GENERATE_IMAGE, POPULATE_PACKAGEINFO, SANITY_CHECK, NETWORK_TEST) = range(7)
-    (SUB_PATH_LAYERS, SUB_FILES_DISTRO, SUB_FILES_MACH, SUB_FILES_SDKMACH, SUB_MATCH_CLASS, SUB_PARSE_CONFIG, SUB_SANITY_CHECK,
-     SUB_GNERATE_TGTS, SUB_GENERATE_PKGINFO, SUB_BUILD_RECIPES, SUB_BUILD_IMAGE, SUB_NETWORK_TEST) = range(12)
+    (CFG_PATH_LOCAL, CFG_PATH_HOB, CFG_PATH_LAYERS, CFG_FILES_DISTRO, CFG_FILES_MACH, CFG_FILES_SDK, FILES_MATCH_CLASS, GENERATE_TGTS, REPARSE_FILES, BUILD_IMAGE) = range(10)
 
-    def __init__(self, server, recipe_model, package_model):
-        super(HobHandler, self).__init__()
+    def __init__(self, taskmodel, server):
+        gobject.GObject.__init__(self)
 
-        self.build = RunningBuild(sequential=True)
-
-        self.recipe_model = recipe_model
-        self.package_model = package_model
-
-        self.commands_async = []
+        self.current_command = None
+        self.building = None
+        self.build_toolchain = False
+        self.build_toolchain_headers = False
         self.generating = False
-        self.current_phase = None
-        self.building = False
-        self.recipe_queue = []
-        self.package_queue = []
+        self.build_queue = []
 
+        self.model = taskmodel
         self.server = server
-        self.error_msg = ""
-        self.initcmd = None
-        self.parsing = False
 
-    def set_busy(self):
-        if not self.generating:
+        self.image_output_types = self.server.runCommand(["getVariable", "IMAGE_FSTYPES"]).split(" ")
+
+    def run_next_command(self):
+        if self.current_command and not self.generating:
             self.emit("generating-data")
             self.generating = True
 
-    def clear_busy(self):
-        if self.generating:
-            self.emit("data-generated")
-            self.generating = False
+        if self.current_command == self.CFG_PATH_LOCAL:
+            self.current_command = self.CFG_PATH_HOB
+            self.server.runCommand(["findConfigFilePath", "hob.local.conf"])
+        elif self.current_command == self.CFG_PATH_HOB:
+            self.current_command = self.CFG_PATH_LAYERS
+            self.server.runCommand(["findConfigFilePath", "bblayers.conf"])
+        elif self.current_command == self.CFG_PATH_LAYERS:
+            self.current_command = self.CFG_FILES_DISTRO
+            self.server.runCommand(["findConfigFiles", "DISTRO"])
+        elif self.current_command == self.CFG_FILES_DISTRO:
+            self.current_command = self.CFG_FILES_MACH
+            self.server.runCommand(["findConfigFiles", "MACHINE"])
+        elif self.current_command == self.CFG_FILES_MACH:
+            self.current_command = self.CFG_FILES_SDK
+            self.server.runCommand(["findConfigFiles", "MACHINE-SDK"])
+        elif self.current_command == self.CFG_FILES_SDK:
+            self.current_command = self.FILES_MATCH_CLASS
+            self.server.runCommand(["findFilesMatchingInDir", "rootfs_", "classes"])
+        elif self.current_command == self.FILES_MATCH_CLASS:
+            self.current_command = self.GENERATE_TGTS
+            self.server.runCommand(["generateTargetsTree", "classes/image.bbclass"])
+        elif self.current_command == self.GENERATE_TGTS:
+            if self.generating:
+                self.emit("data-generated")
+                self.generating = False
+            self.current_command = None
+        elif self.current_command == self.REPARSE_FILES:
+            if self.build_queue:
+                self.current_command = self.BUILD_IMAGE
+            else:
+                self.current_command = self.CFG_PATH_LAYERS
+            self.server.runCommand(["reparseFiles"])
+        elif self.current_command == self.BUILD_IMAGE:
+            self.building = "image"
+            if self.generating:
+                self.emit("data-generated")
+                self.generating = False
+            bbpath = self.server.runCommand(["getVariable", "BBPATH"])
+            bbfiles = self.server.runCommand(["getVariable", "BBFILES"])
+            self.server.runCommand(["buildTargets", self.build_queue, "build"])
+            self.build_queue = []
+            self.current_command = None
 
-    def runCommand(self, commandline):
-        try:
-            result, error = self.server.runCommand(commandline)
-            if error:
-                raise Exception("Error running command '%s': %s" % (commandline, error))
-            return result
-        except Exception as e:
-            self.commands_async = []
-            self.clear_busy()
-            self.emit("command-failed", "Hob Exception - %s" % (str(e)))
-            return None
-
-    def run_next_command(self, initcmd=None):
-        if initcmd != None:
-            self.initcmd = initcmd
-
-        if self.commands_async:
-            self.set_busy()
-            next_command = self.commands_async.pop(0)
-        else:
-            self.clear_busy()
-            if self.initcmd != None:
-                self.emit("command-succeeded", self.initcmd)
-            return
-
-        if next_command == self.SUB_PATH_LAYERS:
-            self.runCommand(["findConfigFilePath", "bblayers.conf"])
-        elif next_command == self.SUB_FILES_DISTRO:
-            self.runCommand(["findConfigFiles", "DISTRO"])
-        elif next_command == self.SUB_FILES_MACH:
-            self.runCommand(["findConfigFiles", "MACHINE"])
-        elif next_command == self.SUB_FILES_SDKMACH:
-            self.runCommand(["findConfigFiles", "MACHINE-SDK"])
-        elif next_command == self.SUB_MATCH_CLASS:
-            self.runCommand(["findFilesMatchingInDir", "rootfs_", "classes"])
-        elif next_command == self.SUB_PARSE_CONFIG:
-            self.runCommand(["enableDataTracking"])
-            self.runCommand(["parseConfigurationFiles", "", ""])
-            self.runCommand(["disableDataTracking"])
-        elif next_command == self.SUB_GNERATE_TGTS:
-            self.runCommand(["generateTargetsTree", "classes/image.bbclass", []])
-        elif next_command == self.SUB_GENERATE_PKGINFO:
-            self.runCommand(["triggerEvent", "bb.event.RequestPackageInfo()"])
-        elif next_command == self.SUB_SANITY_CHECK:
-            self.runCommand(["triggerEvent", "bb.event.SanityCheck()"])
-        elif next_command == self.SUB_NETWORK_TEST:
-            self.runCommand(["triggerEvent", "bb.event.NetworkTest()"])
-        elif next_command == self.SUB_BUILD_RECIPES:
-            self.clear_busy()
-            self.building = True
-            self.runCommand(["buildTargets", self.recipe_queue, self.default_task])
-            self.recipe_queue = []
-        elif next_command == self.SUB_BUILD_IMAGE:
-            self.clear_busy()
-            self.building = True
-            targets = [self.image]
-            if self.package_queue:
-                self.runCommand(["setVariable", "LINGUAS_INSTALL", ""])
-                self.runCommand(["setVariable", "PACKAGE_INSTALL", " ".join(self.package_queue)])
-            if self.toolchain_packages:
-                self.runCommand(["setVariable", "TOOLCHAIN_TARGET_TASK", " ".join(self.toolchain_packages)])
-                targets.append(self.toolchain)
-            if targets[0] == "hob-image":
-                hobImage = self.runCommand(["matchFile", "hob-image.bb"])
-                if self.base_image != "Create your own image":
-                    baseImage = self.runCommand(["matchFile", self.base_image + ".bb"])
-                    version = self.runCommand(["generateNewImage", hobImage, baseImage, self.package_queue])
-                    targets[0] += version
-                    self.recipe_model.set_custom_image_version(version)
-
-            self.runCommand(["buildTargets", targets, self.default_task])
-
-    def display_error(self):
-        self.clear_busy()
-        self.emit("command-failed", self.error_msg)
-        self.error_msg = ""
-        if self.building:
-            self.building = False
-
-    def handle_event(self, event):
+    def handle_event(self, event, running_build, pbar):
         if not event:
-            return
+	    return
+
+        # If we're running a build, use the RunningBuild event handler
         if self.building:
-            self.current_phase = "building"
-            self.build.handle_event(event)
-
-        if isinstance(event, bb.event.PackageInfo):
-            self.package_model.populate(event._pkginfolist)
-            self.emit("package-populated")
-            self.run_next_command()
-
-        elif isinstance(event, bb.event.SanityCheckPassed):
-            reparse = self.runCommand(["getVariable", "BB_INVALIDCONF"]) or None
-            if reparse is True:
-                self.runCommand(["setVariable", "BB_INVALIDCONF", False])
-                self.runCommand(["parseConfigurationFiles", "", ""])
-            self.run_next_command()
-
-        elif isinstance(event, bb.event.SanityCheckFailed):
-            self.emit("sanity-failed", event._msg, event._network_error)
-
-        elif isinstance(event, logging.LogRecord):
-            if not self.building:
-                if event.levelno >= logging.ERROR:
-                    formatter = bb.msg.BBLogFormatter()
-                    msg = formatter.format(event)
-                    self.error_msg += msg + '\n'
-                elif event.levelno >= logging.WARNING and self.parsing == True:
-                    formatter = bb.msg.BBLogFormatter()
-                    msg = formatter.format(event)
-                    warn_msg = msg + '\n'
-                    self.emit("parsing-warning", warn_msg)
-
+            running_build.handle_event(event)
         elif isinstance(event, bb.event.TargetsTreeGenerated):
-            self.current_phase = "data generation"
             if event._model:
-                self.recipe_model.populate(event._model)
-                self.emit("recipe-populated")
+                self.model.populate(event._model)
         elif isinstance(event, bb.event.ConfigFilesFound):
-            self.current_phase = "configuration lookup"
             var = event._variable
-            values = event._values
-            values.sort()
-            self.emit("config-updated", var, values)
+	    if var == "distro":
+		distros = event._values
+		distros.sort()
+		self.emit("distros-updated", distros)
+	    elif var == "machine":
+	        machines = event._values
+		machines.sort()
+		self.emit("machines-updated", machines)
+            elif var == "machine-sdk":
+                sdk_machines = event._values
+                sdk_machines.sort()
+                self.emit("sdk-machines-updated", sdk_machines)
         elif isinstance(event, bb.event.ConfigFilePathFound):
-            self.current_phase = "configuration lookup"
+            path = event._path
+            self.emit("config-found", path)
         elif isinstance(event, bb.event.FilesMatchingFound):
-            self.current_phase = "configuration lookup"
             # FIXME: hard coding, should at least be a variable shared between
             # here and the caller
             if event._pattern == "rootfs_":
@@ -247,331 +160,158 @@ class HobHandler(gobject.GObject):
                     fs, sep, format = classname.rpartition("_")
                     formats.append(format)
                 formats.sort()
-                self.emit("package-formats-updated", formats)
+                self.emit("package-formats-found", formats)
         elif isinstance(event, bb.command.CommandCompleted):
-            self.current_phase = None
             self.run_next_command()
         elif isinstance(event, bb.command.CommandFailed):
-            self.commands_async = []
-            self.display_error()
-        elif isinstance(event, (bb.event.ParseStarted,
-                 bb.event.CacheLoadStarted,
-                 bb.event.TreeDataPreparationStarted,
-                 )):
-            message = {}
-            message["eventname"] = bb.event.getName(event)
-            message["current"] = 0
-            message["total"] = None
-            message["title"] = "Parsing recipes"
-            self.emit("parsing-started", message)
-            if isinstance(event, bb.event.ParseStarted):
-                self.parsing = True
-        elif isinstance(event, (bb.event.ParseProgress,
-                bb.event.CacheLoadProgress,
-                bb.event.TreeDataPreparationProgress)):
-            message = {}
-            message["eventname"] = bb.event.getName(event)
-            message["current"] = event.current
-            message["total"] = event.total
-            message["title"] = "Parsing recipes"
-            self.emit("parsing", message)
-        elif isinstance(event, (bb.event.ParseCompleted,
-                bb.event.CacheLoadCompleted,
-                bb.event.TreeDataPreparationCompleted)):
-            message = {}
-            message["eventname"] = bb.event.getName(event)
-            message["current"] = event.total
-            message["total"] = event.total
-            message["title"] = "Parsing recipes"
-            self.emit("parsing-completed", message)
-            if isinstance(event, bb.event.ParseCompleted):
-                self.parsing = False
-        elif isinstance(event, bb.event.NetworkTestFailed):
-            self.emit("network-failed")
-            self.run_next_command()
-        elif isinstance(event, bb.event.NetworkTestPassed):
-            self.emit("network-passed")
-            self.run_next_command()
-
-        if self.error_msg and not self.commands_async:
-            self.display_error()
-
+            self.emit("error", event.error)
+        elif isinstance(event, bb.event.CacheLoadStarted):
+            bb.ui.crumbs.hobeventhandler.progress_total = event.total
+            pbar.set_text("Loading cache: %s/%s" % (0, bb.ui.crumbs.hobeventhandler.progress_total))
+        elif isinstance(event, bb.event.CacheLoadProgress):
+            pbar.set_text("Loading cache: %s/%s" % (event.current, bb.ui.crumbs.hobeventhandler.progress_total))
+        elif isinstance(event, bb.event.CacheLoadCompleted):
+            pbar.set_text("Loading cache: %s/%s" % (bb.ui.crumbs.hobeventhandler.progress_total, bb.ui.crumbs.hobeventhandler.progress_total))
+        elif isinstance(event, bb.event.ParseStarted):
+            if event.total == 0:
+                return
+            bb.ui.crumbs.hobeventhandler.progress_total = event.total
+            pbar.set_text("Processing recipes: %s/%s" % (0, bb.ui.crumbs.hobeventhandler.progress_total))
+        elif isinstance(event, bb.event.ParseProgress):
+            pbar.set_text("Processing recipes: %s/%s" % (event.current, bb.ui.crumbs.hobeventhandler.progress_total))
+        elif isinstance(event, bb.event.ParseCompleted):
+            pbar.set_fraction(1.0)
         return
 
-    def init_cooker(self):
-        self.runCommand(["initCooker"])
-
-    def set_extra_inherit(self, bbclass):
-        inherits = self.runCommand(["getVariable", "INHERIT"]) or ""
-        inherits = inherits + " " + bbclass
-        self.runCommand(["setVariable", "INHERIT", inherits])
-
-    def set_bblayers(self, bblayers):
-        self.runCommand(["setVariable", "BBLAYERS", " ".join(bblayers)])
+    def event_handle_idle_func (self, eventHandler, running_build, pbar):
+        # Consume as many messages as we can in the time available to us
+        event = eventHandler.getEvent()
+        while event:
+            self.handle_event(event, running_build, pbar)
+            event = eventHandler.getEvent()
+        return True
 
     def set_machine(self, machine):
-        if machine:
-            self.runCommand(["setVariable", "MACHINE", machine])
+        self.server.runCommand(["setVariable", "MACHINE", machine])
 
     def set_sdk_machine(self, sdk_machine):
-        self.runCommand(["setVariable", "SDKMACHINE", sdk_machine])
-
-    def set_image_fstypes(self, image_fstypes):
-        self.runCommand(["setVariable", "IMAGE_FSTYPES", image_fstypes])
+        self.server.runCommand(["setVariable", "SDKMACHINE", sdk_machine])
 
     def set_distro(self, distro):
-        self.runCommand(["setVariable", "DISTRO", distro])
+        self.server.runCommand(["setVariable", "DISTRO", distro])
 
     def set_package_format(self, format):
-        package_classes = ""
-        for pkgfmt in format.split():
-            package_classes += ("package_%s" % pkgfmt + " ")
-        self.runCommand(["setVariable", "PACKAGE_CLASSES", package_classes])
+        self.server.runCommand(["setVariable", "PACKAGE_CLASSES", "package_%s" % format])
+
+    def reload_data(self, config=None):
+        img = self.model.selected_image
+        selected_packages, _ = self.model.get_selected_packages()
+        self.emit("reload-triggered", img, " ".join(selected_packages))
+        self.current_command = self.REPARSE_FILES
+        self.run_next_command()
 
     def set_bbthreads(self, threads):
-        self.runCommand(["setVariable", "BB_NUMBER_THREADS", threads])
+        self.server.runCommand(["setVariable", "BB_NUMBER_THREADS", threads])
 
     def set_pmake(self, threads):
         pmake = "-j %s" % threads
-        self.runCommand(["setVariable", "PARALLEL_MAKE", pmake])
+        self.server.runCommand(["setVariable", "BB_NUMBER_THREADS", pmake])
 
-    def set_dl_dir(self, directory):
-        self.runCommand(["setVariable", "DL_DIR", directory])
-
-    def set_sstate_dir(self, directory):
-        self.runCommand(["setVariable", "SSTATE_DIR", directory])
-
-    def set_sstate_mirrors(self, url):
-        self.runCommand(["setVariable", "SSTATE_MIRRORS", url])
-
-    def set_extra_size(self, image_extra_size):
-        self.runCommand(["setVariable", "IMAGE_ROOTFS_EXTRA_SPACE", str(image_extra_size)])
-
-    def set_rootfs_size(self, image_rootfs_size):
-        self.runCommand(["setVariable", "IMAGE_ROOTFS_SIZE", str(image_rootfs_size)])
-
-    def set_incompatible_license(self, incompat_license):
-        self.runCommand(["setVariable", "INCOMPATIBLE_LICENSE", incompat_license])
-
-    def set_extra_config(self, extra_setting):
-        for key in extra_setting.keys():
-            value = extra_setting[key]
-            self.runCommand(["setVariable", key, value])
-
-    def set_http_proxy(self, http_proxy):
-        self.runCommand(["setVariable", "http_proxy", http_proxy])
-
-    def set_https_proxy(self, https_proxy):
-        self.runCommand(["setVariable", "https_proxy", https_proxy])
-
-    def set_ftp_proxy(self, ftp_proxy):
-        self.runCommand(["setVariable", "ftp_proxy", ftp_proxy])
-
-    def set_socks_proxy(self, socks_proxy):
-        self.runCommand(["setVariable", "all_proxy", socks_proxy])
-
-    def set_cvs_proxy(self, host, port):
-        self.runCommand(["setVariable", "CVS_PROXY_HOST", host])
-        self.runCommand(["setVariable", "CVS_PROXY_PORT", port])
-
-    def request_package_info(self):
-        self.commands_async.append(self.SUB_GENERATE_PKGINFO)
-        self.run_next_command(self.POPULATE_PACKAGEINFO)
-
-    def trigger_sanity_check(self):
-        self.commands_async.append(self.SUB_SANITY_CHECK)
-        self.run_next_command(self.SANITY_CHECK)
-
-    def trigger_network_test(self):
-        self.commands_async.append(self.SUB_NETWORK_TEST)
-        self.run_next_command(self.NETWORK_TEST)
-
-    def generate_configuration(self):
-        self.commands_async.append(self.SUB_PARSE_CONFIG)
-        self.commands_async.append(self.SUB_PATH_LAYERS)
-        self.commands_async.append(self.SUB_FILES_DISTRO)
-        self.commands_async.append(self.SUB_FILES_MACH)
-        self.commands_async.append(self.SUB_FILES_SDKMACH)
-        self.commands_async.append(self.SUB_MATCH_CLASS)
-        self.run_next_command(self.GENERATE_CONFIGURATION)
-
-    def generate_recipes(self):
-        self.commands_async.append(self.SUB_PARSE_CONFIG)
-        self.commands_async.append(self.SUB_GNERATE_TGTS)
-        self.run_next_command(self.GENERATE_RECIPES)
-
-    def generate_packages(self, tgts, default_task="build"):
+    def build_image(self, image, image_path, configurator):
         targets = []
-        targets.extend(tgts)
-        self.recipe_queue = targets
-        self.default_task = default_task
-        self.commands_async.append(self.SUB_PARSE_CONFIG)
-        self.commands_async.append(self.SUB_BUILD_RECIPES)
-        self.run_next_command(self.GENERATE_PACKAGES)
+        targets.append(image)
+        if self.build_toolchain and self.build_toolchain_headers:
+            targets.append("meta-toolchain-sdk")
+        elif self.build_toolchain:
+            targets.append("meta-toolchain")
+        self.build_queue = targets
 
-    def generate_image(self, image, base_image, toolchain, image_packages=[], toolchain_packages=[], default_task="build"):
-        self.image = image
-        self.base_image = base_image
-        self.toolchain = toolchain
-        self.package_queue = image_packages
-        self.toolchain_packages = toolchain_packages
-        self.default_task = default_task
-        self.commands_async.append(self.SUB_PARSE_CONFIG)
-        self.commands_async.append(self.SUB_BUILD_IMAGE)
-        self.run_next_command(self.GENERATE_IMAGE)
+        bbpath_ok = False
+        bbpath = self.server.runCommand(["getVariable", "BBPATH"])
+        if image_path in bbpath.split(":"):
+            bbpath_ok = True
 
-    def build_succeeded_async(self):
-        self.building = False
+        bbfiles_ok = False
+        bbfiles = self.server.runCommand(["getVariable", "BBFILES"]).split(" ")
+        for files in bbfiles:
+            import re
+            pattern = "%s/\*.bb" % image_path
+            if re.match(pattern, files):
+                bbfiles_ok = True
 
-    def build_failed_async(self):
-        self.initcmd = None
-        self.commands_async = []
-        self.building = False
+        if not bbpath_ok:
+            nbbp = image_path
+        else:
+            nbbp = None
 
-    def cancel_parse(self):
-        self.runCommand(["stateStop"])
+        if not bbfiles_ok:
+            nbbf = "%s/*.bb" % image_path
+        else:
+            nbbf = None
+
+        if not bbfiles_ok or not bbpath_ok:
+            configurator.insertTempBBPath(nbbp, nbbf)
+
+        self.current_command = self.REPARSE_FILES
+        self.run_next_command()
+
+    def build_packages(self, pkgs):
+        self.building = "packages"
+        self.server.runCommand(["buildTargets", pkgs, "build"])
 
     def cancel_build(self, force=False):
         if force:
             # Force the cooker to stop as quickly as possible
-            self.runCommand(["stateStop"])
+            self.server.runCommand(["stateStop"])
         else:
             # Wait for tasks to complete before shutting down, this helps
             # leave the workdir in a usable state
-            self.runCommand(["stateShutdown"])
+            self.server.runCommand(["stateShutdown"])
 
-    def reset_build(self):
-        self.build.reset()
+    def set_incompatible_license(self, incompatible):
+        self.server.runCommand(["setVariable", "INCOMPATIBLE_LICENSE", incompatible])
 
-    def get_logfile(self):
-        return self.server.runCommand(["getVariable", "BB_CONSOLELOG"])[0]
+    def toggle_toolchain(self, enabled):
+        if self.build_toolchain != enabled:
+            self.build_toolchain = enabled
 
-    def _remove_redundant(self, string):
-        ret = []
-        for i in string.split():
-            if i not in ret:
-                ret.append(i)
-        return " ".join(ret)
+    def toggle_toolchain_headers(self, enabled):
+        if self.build_toolchain_headers != enabled:
+            self.build_toolchain_headers = enabled
 
-    def set_var_in_file(self, var, val, default_file=None):
-        self.server.runCommand(["setVarFile", var, val, default_file])
+    def queue_image_recipe_path(self, path):
+        self.build_queue.append(path)
 
-    def get_parameters(self):
-        # retrieve the parameters from bitbake
-        params = {}
-        params["core_base"] = self.runCommand(["getVariable", "COREBASE"]) or ""
-        hob_layer = params["core_base"] + "/meta-hob"
-        params["layer"] = self.runCommand(["getVariable", "BBLAYERS"]) or ""
-        params["layers_non_removable"] = self.runCommand(["getVariable", "BBLAYERS_NON_REMOVABLE"]) or ""
-        if hob_layer not in params["layer"].split():
-            params["layer"] += (" " + hob_layer)
-        if hob_layer not in params["layers_non_removable"].split():
-            params["layers_non_removable"] += (" " + hob_layer)
-        params["dldir"] = self.runCommand(["getVariable", "DL_DIR"]) or ""
-        params["machine"] = self.runCommand(["getVariable", "MACHINE"]) or ""
-        params["distro"] = self.runCommand(["getVariable", "DISTRO"]) or "defaultsetup"
-        params["pclass"] = self.runCommand(["getVariable", "PACKAGE_CLASSES"]) or ""
-        params["sstatedir"] = self.runCommand(["getVariable", "SSTATE_DIR"]) or ""
-        params["sstatemirror"] = self.runCommand(["getVariable", "SSTATE_MIRRORS"]) or ""
-
-        num_threads = self.runCommand(["getCpuCount"])
-        if not num_threads:
-            num_threads = 1
-            max_threads = 65536
+    def build_complete_cb(self, running_build):
+        if len(self.build_queue) > 0:
+            next = self.build_queue.pop(0)
+            if next.endswith('.bb'):
+                self.build_file(next)
+                self.building = 'image'
+                self.build_file(next)
+            else:
+                self.build_packages(next.split(" "))
         else:
-            try:
-                num_threads = int(num_threads)
-                max_threads = 16 * num_threads
-            except:
-                num_threads = 1
-                max_threads = 65536
-        params["max_threads"] = max_threads
+            self.building = None
+            self.emit("build-complete")
 
-        bbthread = self.runCommand(["getVariable", "BB_NUMBER_THREADS"])
-        if not bbthread:
-            bbthread = num_threads
-        else:
-            try:
-                bbthread = int(bbthread)
-            except:
-                bbthread = num_threads
-        params["bbthread"] = bbthread
+    def set_fstypes(self, fstypes):
+        self.server.runCommand(["setVariable", "IMAGE_FSTYPES", fstypes])
 
-        pmake = self.runCommand(["getVariable", "PARALLEL_MAKE"])
-        if not pmake:
-            pmake = num_threads
-        elif isinstance(pmake, int):
-            pass
-        else:
-            try:
-                pmake = int(pmake.lstrip("-j "))
-            except:
-                pmake = num_threads
-        params["pmake"] = "-j %s" % pmake
+    def add_image_output_type(self, output_type):
+        if output_type not in self.image_output_types:
+            self.image_output_types.append(output_type)
+            fstypes = " ".join(self.image_output_types)
+            self.set_fstypes(fstypes)
+        return fstypes
 
-        params["image_addr"] = self.runCommand(["getVariable", "DEPLOY_DIR_IMAGE"]) or ""
+    def remove_image_output_type(self, output_type):
+        if output_type in self.image_output_types:
+            ind = self.image_output_types.index(output_type)
+            self.image_output_types.pop(ind)
+            fstypes = " ".join(self.image_output_types)
+            self.set_fstypes(fstypes)
+        return fstypes
 
-        image_extra_size = self.runCommand(["getVariable", "IMAGE_ROOTFS_EXTRA_SPACE"])
-        if not image_extra_size:
-            image_extra_size = 0
-        else:
-            try:
-                image_extra_size = int(image_extra_size)
-            except:
-                image_extra_size = 0
-        params["image_extra_size"] = image_extra_size
-
-        image_rootfs_size = self.runCommand(["getVariable", "IMAGE_ROOTFS_SIZE"])
-        if not image_rootfs_size:
-            image_rootfs_size = 0
-        else:
-            try:
-                image_rootfs_size = int(image_rootfs_size)
-            except:
-                image_rootfs_size = 0
-        params["image_rootfs_size"] = image_rootfs_size
-
-        image_overhead_factor = self.runCommand(["getVariable", "IMAGE_OVERHEAD_FACTOR"])
-        if not image_overhead_factor:
-            image_overhead_factor = 1
-        else:
-            try:
-                image_overhead_factor = float(image_overhead_factor)
-            except:
-                image_overhead_factor = 1
-        params['image_overhead_factor'] = image_overhead_factor
-
-        params["incompat_license"] = self._remove_redundant(self.runCommand(["getVariable", "INCOMPATIBLE_LICENSE"]) or "")
-        params["sdk_machine"] = self.runCommand(["getVariable", "SDKMACHINE"]) or self.runCommand(["getVariable", "SDK_ARCH"]) or ""
-
-        params["image_fstypes"] = self._remove_redundant(self.runCommand(["getVariable", "IMAGE_FSTYPES"]) or "")
-
-        params["image_types"] = self._remove_redundant(self.runCommand(["getVariable", "IMAGE_TYPES"]) or "")
-
-        params["conf_version"] = self.runCommand(["getVariable", "CONF_VERSION"]) or ""
-        params["lconf_version"] = self.runCommand(["getVariable", "LCONF_VERSION"]) or ""
-
-        params["runnable_image_types"] = self._remove_redundant(self.runCommand(["getVariable", "RUNNABLE_IMAGE_TYPES"]) or "")
-        params["runnable_machine_patterns"] = self._remove_redundant(self.runCommand(["getVariable", "RUNNABLE_MACHINE_PATTERNS"]) or "")
-        params["deployable_image_types"] = self._remove_redundant(self.runCommand(["getVariable", "DEPLOYABLE_IMAGE_TYPES"]) or "")
-        params["kernel_image_type"] = self.runCommand(["getVariable", "KERNEL_IMAGETYPE"]) or ""
-        params["tmpdir"] = self.runCommand(["getVariable", "TMPDIR"]) or ""
-        params["distro_version"] = self.runCommand(["getVariable", "DISTRO_VERSION"]) or ""
-        params["target_os"] = self.runCommand(["getVariable", "TARGET_OS"]) or ""
-        params["target_arch"] = self.runCommand(["getVariable", "TARGET_ARCH"]) or ""
-        params["tune_pkgarch"] = self.runCommand(["getVariable", "TUNE_PKGARCH"])  or ""
-        params["bb_version"] = self.runCommand(["getVariable", "BB_MIN_VERSION"]) or ""
-
-        params["default_task"] = self.runCommand(["getVariable", "BB_DEFAULT_TASK"]) or "build"
-
-        params["socks_proxy"] = self.runCommand(["getVariable", "all_proxy"]) or ""
-        params["http_proxy"] = self.runCommand(["getVariable", "http_proxy"]) or ""
-        params["ftp_proxy"] = self.runCommand(["getVariable", "ftp_proxy"]) or ""
-        params["https_proxy"] = self.runCommand(["getVariable", "https_proxy"]) or ""
-
-        params["cvs_proxy_host"] = self.runCommand(["getVariable", "CVS_PROXY_HOST"]) or ""
-        params["cvs_proxy_port"] = self.runCommand(["getVariable", "CVS_PROXY_PORT"]) or ""
-
-        params["image_white_pattern"] = self.runCommand(["getVariable", "BBUI_IMAGE_WHITE_PATTERN"]) or ""
-        params["image_black_pattern"] = self.runCommand(["getVariable", "BBUI_IMAGE_BLACK_PATTERN"]) or ""
-        return params
+    def get_image_deploy_dir(self):
+        return self.server.runCommand(["getVariable", "DEPLOY_DIR_IMAGE"])

bitbake/lib/bb/ui/crumbs/hoblistmodel.py

@@ -1,852 +0,0 @@
-#
-# BitBake Graphical GTK User Interface
-#
-# Copyright (C) 2011        Intel Corporation
-#
-# Authored by Joshua Lock <josh@linux.intel.com>
-# Authored by Dongxiao Xu <dongxiao.xu@intel.com>
-# Authored by Shane Wang <shane.wang@intel.com>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-import gtk
-import gobject
-from bb.ui.crumbs.hobpages import HobPage
-
-#
-# PackageListModel
-#
-class PackageListModel(gtk.ListStore):
-    """
-    This class defines an gtk.ListStore subclass which will convert the output
-    of the bb.event.TargetsTreeGenerated event into a gtk.ListStore whilst also
-    providing convenience functions to access gtk.TreeModel subclasses which
-    provide filtered views of the data.
-    """
-
-    (COL_NAME, COL_VER, COL_REV, COL_RNM, COL_SEC, COL_SUM, COL_RDEP, COL_RPROV, COL_SIZE, COL_RCP, COL_BINB, COL_INC, COL_FADE_INC, COL_FONT, COL_FLIST) = range(15)
-
-    __gsignals__ = {
-        "package-selection-changed" : (gobject.SIGNAL_RUN_LAST,
-                                gobject.TYPE_NONE,
-                                ()),
-    }
-
-    __toolchain_required_packages__ = ["packagegroup-core-standalone-sdk-target", "packagegroup-core-standalone-sdk-target-dbg"]
-
-    def __init__(self):
-        self.rprov_pkg = {}
-        gtk.ListStore.__init__ (self,
-                                gobject.TYPE_STRING,
-                                gobject.TYPE_STRING,
-                                gobject.TYPE_STRING,
-                                gobject.TYPE_STRING,
-                                gobject.TYPE_STRING,
-                                gobject.TYPE_STRING,
-                                gobject.TYPE_STRING,
-                                gobject.TYPE_STRING,
-                                gobject.TYPE_STRING,
-                                gobject.TYPE_STRING,
-                                gobject.TYPE_STRING,
-                                gobject.TYPE_BOOLEAN,
-                                gobject.TYPE_BOOLEAN,
-                                gobject.TYPE_STRING,
-                                gobject.TYPE_STRING)
-
-    """
-    Find the model path for the item_name
-    Returns the path in the model or None
-    """
-    def find_path_for_item(self, item_name):
-        pkg = item_name
-        if item_name not in self.pn_path.keys():
-            if item_name not in self.rprov_pkg.keys():
-                return None
-            pkg = self.rprov_pkg[item_name]
-            if pkg not in self.pn_path.keys():
-                return None
-
-        return self.pn_path[pkg]
-
-    def find_item_for_path(self, item_path):
-        return self[item_path][self.COL_NAME]
-
-    """
-    Helper function to determine whether an item is an item specified by filter
-    """
-    def tree_model_filter(self, model, it, filter):
-        name = model.get_value(it, self.COL_NAME)
-
-        for key in filter.keys():
-            if key == self.COL_NAME:
-                if filter[key] != 'Search packages by name':
-                    if name and filter[key] not in name:
-                        return False
-            else:
-                if model.get_value(it, key) not in filter[key]:
-                    return False
-        self.filtered_nb += 1
-        return True
-
-    """
-    Create, if required, and return a filtered gtk.TreeModelSort
-    containing only the items specified by filter
-    """
-    def tree_model(self, filter, excluded_items_ahead=False, included_items_ahead=False, search_data=None, initial=False):
-        model = self.filter_new()
-        self.filtered_nb = 0
-        model.set_visible_func(self.tree_model_filter, filter)
-
-        sort = gtk.TreeModelSort(model)
-        if initial:
-            sort.set_sort_column_id(PackageListModel.COL_NAME, gtk.SORT_ASCENDING)
-            sort.set_default_sort_func(None)
-
-        if excluded_items_ahead:
-            sort.set_default_sort_func(self.exclude_item_sort_func, search_data)
-        elif included_items_ahead:
-            sort.set_default_sort_func(self.include_item_sort_func, search_data)
-        else:
-            if search_data and search_data!='Search recipes by name' and search_data!='Search package groups by name':
-                sort.set_default_sort_func(self.sort_func, search_data)
-            else:
-                sort.set_sort_column_id(PackageListModel.COL_NAME, gtk.SORT_ASCENDING)
-                sort.set_default_sort_func(None)
-
-        sort.set_sort_func(PackageListModel.COL_INC, self.sort_column, PackageListModel.COL_INC)
-        sort.set_sort_func(PackageListModel.COL_SIZE, self.sort_column, PackageListModel.COL_SIZE)
-        sort.set_sort_func(PackageListModel.COL_BINB, self.sort_column, PackageListModel.COL_BINB)
-        sort.set_sort_func(PackageListModel.COL_RCP, self.sort_column, PackageListModel.COL_RCP)
-        return sort
-
-    def sort_column(self, model, row1, row2, col):
-        value1 = model.get_value(row1, col)
-        value2 = model.get_value(row2, col)
-        if col==PackageListModel.COL_SIZE:
-            value1 = HobPage._string_to_size(value1)
-            value2 = HobPage._string_to_size(value2)
-
-        cmp_res = cmp(value1, value2)
-        if cmp_res!=0:
-            if col==PackageListModel.COL_INC:
-                return -cmp_res
-            else:
-                return cmp_res
-        else:
-            name1 = model.get_value(row1, PackageListModel.COL_NAME)
-            name2 = model.get_value(row2, PackageListModel.COL_NAME)
-            return cmp(name1,name2)
-
-    def exclude_item_sort_func(self, model, iter1, iter2, user_data=None):
-        if user_data:
-            val1 = model.get_value(iter1, PackageListModel.COL_NAME)
-            val2 = model.get_value(iter2, PackageListModel.COL_NAME)
-            if val1.startswith(user_data) and not val2.startswith(user_data):
-                return -1
-            elif not val1.startswith(user_data) and val2.startswith(user_data):
-                return 1
-            else:
-                return 0
-        else:
-            val1 = model.get_value(iter1, PackageListModel.COL_FADE_INC)
-            val2 = model.get_value(iter2, PackageListModel.COL_INC)
-            return ((val1 == True) and (val2 == False))
-
-    def include_item_sort_func(self, model, iter1, iter2, user_data=None):
-        if user_data:
-            val1 = model.get_value(iter1, PackageListModel.COL_NAME)
-            val2 = model.get_value(iter2, PackageListModel.COL_NAME)
-            if val1.startswith(user_data) and not val2.startswith(user_data):
-                return -1
-            elif not val1.startswith(user_data) and val2.startswith(user_data):
-                return 1
-            else:
-                return 0
-        else:
-            val1 = model.get_value(iter1, PackageListModel.COL_INC)
-            val2 = model.get_value(iter2, PackageListModel.COL_INC)
-            return ((val1 == False) and (val2 == True))
-
-    def sort_func(self, model, iter1, iter2, user_data):
-        val1 = model.get_value(iter1, PackageListModel.COL_NAME)
-        val2 = model.get_value(iter2, PackageListModel.COL_NAME)
-        if val1 is None or val2 is None:
-            return 0
-        elif val1.startswith(user_data) and not val2.startswith(user_data):
-            return -1
-        elif not val1.startswith(user_data) and val2.startswith(user_data):
-            return 1
-        else:
-            return 0
-
-    def convert_vpath_to_path(self, view_model, view_path):
-        # view_model is the model sorted
-        # get the path of the model filtered
-        filtered_model_path = view_model.convert_path_to_child_path(view_path)
-        # get the model filtered
-        filtered_model = view_model.get_model()
-        # get the path of the original model
-        path = filtered_model.convert_path_to_child_path(filtered_model_path)
-        return path
-
-    def convert_path_to_vpath(self, view_model, path):
-        it = view_model.get_iter_first()
-        while it:
-            name = self.find_item_for_path(path)
-            view_name = view_model.get_value(it, PackageListModel.COL_NAME)
-            if view_name == name:
-                view_path = view_model.get_path(it)
-                return view_path
-            it = view_model.iter_next(it)
-        return None
-
-    """
-    The populate() function takes as input the data from a
-    bb.event.PackageInfo event and populates the package list.
-    """
-    def populate(self, pkginfolist):
-        # First clear the model, in case repopulating
-        self.clear()
-
-        def getpkgvalue(pkgdict, key, pkgname, defaultval = None):
-            value = pkgdict.get('%s_%s' % (key, pkgname), None)
-            if not value:
-                value = pkgdict.get(key, defaultval)
-            return value
-
-        for pkginfo in pkginfolist:
-            pn = pkginfo['PN']
-            pv = pkginfo['PV']
-            pr = pkginfo['PR']
-            pkg = pkginfo['PKG']
-            pkgv = getpkgvalue(pkginfo, 'PKGV', pkg)
-            pkgr = getpkgvalue(pkginfo, 'PKGR', pkg)
-            # PKGSIZE is artificial, will always be overridden with the package name if present
-            pkgsize = pkginfo.get('PKGSIZE_%s' % pkg, "0")
-            # PKG_%s is the renamed version
-            pkg_rename = pkginfo.get('PKG_%s' % pkg, "")
-            # The rest may be overridden or not
-            section = getpkgvalue(pkginfo, 'SECTION', pkg, "")
-            summary = getpkgvalue(pkginfo, 'SUMMARY', pkg, "")
-            rdep = getpkgvalue(pkginfo, 'RDEPENDS', pkg, "")
-            rrec = getpkgvalue(pkginfo, 'RRECOMMENDS', pkg, "")
-            rprov = getpkgvalue(pkginfo, 'RPROVIDES', pkg, "")
-            files_list = getpkgvalue(pkginfo, 'FILES_INFO', pkg, "")
-            for i in rprov.split():
-                self.rprov_pkg[i] = pkg
-
-            recipe = pn + '-' + pv + '-' + pr
-
-            allow_empty = getpkgvalue(pkginfo, 'ALLOW_EMPTY', pkg, "")
-
-            if pkgsize == "0" and not allow_empty:
-                continue
-
-            # pkgsize is in KB
-            size = HobPage._size_to_string(HobPage._string_to_size(pkgsize + ' KB'))
-            self.set(self.append(), self.COL_NAME, pkg, self.COL_VER, pkgv,
-                     self.COL_REV, pkgr, self.COL_RNM, pkg_rename,
-                     self.COL_SEC, section, self.COL_SUM, summary,
-                     self.COL_RDEP, rdep + ' ' + rrec,
-                     self.COL_RPROV, rprov, self.COL_SIZE, size,
-                     self.COL_RCP, recipe, self.COL_BINB, "",
-                     self.COL_INC, False, self.COL_FONT, '10', self.COL_FLIST, files_list)
-
-        self.pn_path = {}
-        it = self.get_iter_first()
-        while it:
-            pn = self.get_value(it, self.COL_NAME)
-            path = self.get_path(it)
-            self.pn_path[pn] = path
-            it = self.iter_next(it)
-
-    """
-    Update the model, send out the notification.
-    """
-    def selection_change_notification(self):
-        self.emit("package-selection-changed")
-
-    """
-    Check whether the item at item_path is included or not
-    """
-    def path_included(self, item_path):
-        return self[item_path][self.COL_INC]
-
-    """
-    Add this item, and any of its dependencies, to the image contents
-    """
-    def include_item(self, item_path, binb=""):
-        if self.path_included(item_path):
-            return
-
-        item_name = self[item_path][self.COL_NAME]
-        item_deps = self[item_path][self.COL_RDEP]
-
-        self[item_path][self.COL_INC] = True
-
-        item_bin = self[item_path][self.COL_BINB].split(', ')
-        if binb and not binb in item_bin:
-            item_bin.append(binb)
-            self[item_path][self.COL_BINB] = ', '.join(item_bin).lstrip(', ')
-
-        if item_deps:
-            # Ensure all of the items deps are included and, where appropriate,
-            # add this item to their COL_BINB
-            for dep in item_deps.split(" "):
-                if dep.startswith('('):
-                    continue
-                # If the contents model doesn't already contain dep, add it
-                dep_path = self.find_path_for_item(dep)
-                if not dep_path:
-                    continue
-                dep_included = self.path_included(dep_path)
-
-                if dep_included and not dep in item_bin:
-                    # don't set the COL_BINB to this item if the target is an
-                    # item in our own COL_BINB
-                    dep_bin = self[dep_path][self.COL_BINB].split(', ')
-                    if not item_name in dep_bin:
-                        dep_bin.append(item_name)
-                        self[dep_path][self.COL_BINB] = ', '.join(dep_bin).lstrip(', ')
-                elif not dep_included:
-                    self.include_item(dep_path, binb=item_name)
-
-    def exclude_item(self, item_path):
-        if not self.path_included(item_path):
-            return
-
-        self[item_path][self.COL_INC] = False
-
-        item_name = self[item_path][self.COL_NAME]
-        item_deps = self[item_path][self.COL_RDEP]
-        if item_deps:
-            for dep in item_deps.split(" "):
-                if dep.startswith('('):
-                    continue
-                dep_path = self.find_path_for_item(dep)
-                if not dep_path:
-                    continue
-                dep_bin = self[dep_path][self.COL_BINB].split(', ')
-                if item_name in dep_bin:
-                    dep_bin.remove(item_name)
-                    self[dep_path][self.COL_BINB] = ', '.join(dep_bin).lstrip(', ')
-
-        item_bin = self[item_path][self.COL_BINB].split(', ')
-        if item_bin:
-            for binb in item_bin:
-                binb_path = self.find_path_for_item(binb)
-                if not binb_path:
-                    continue
-                self.exclude_item(binb_path)
-
-    """
-    Empty self.contents by setting the include of each entry to None
-    """
-    def reset(self):
-        it = self.get_iter_first()
-        while it:
-            self.set(it,
-                     self.COL_INC, False,
-                     self.COL_BINB, "")
-            it = self.iter_next(it)
-
-        self.selection_change_notification()
-
-    def get_selected_packages(self):
-        packagelist = []
-
-        it = self.get_iter_first()
-        while it:
-            if self.get_value(it, self.COL_INC):
-                name = self.get_value(it, self.COL_NAME)
-                packagelist.append(name)
-            it = self.iter_next(it)
-
-        return packagelist
-
-    def get_user_selected_packages(self):
-        packagelist = []
-
-        it = self.get_iter_first()
-        while it:
-            if self.get_value(it, self.COL_INC):
-                binb = self.get_value(it, self.COL_BINB)
-                if binb == "User Selected":
-                    name = self.get_value(it, self.COL_NAME)
-                    packagelist.append(name)
-            it = self.iter_next(it)
-
-        return packagelist
-
-    def get_selected_packages_toolchain(self):
-        packagelist = []
-
-        it = self.get_iter_first()
-        while it:
-            if self.get_value(it, self.COL_INC):
-                name = self.get_value(it, self.COL_NAME)
-                if name.endswith("-dev") or name.endswith("-dbg"):
-                    packagelist.append(name)
-            it = self.iter_next(it)
-
-        return list(set(packagelist + self.__toolchain_required_packages__));
-
-    """
-    Package model may be incomplete, therefore when calling the
-    set_selected_packages(), some packages will not be set included.
-    Return the un-set packages list.
-    """
-    def set_selected_packages(self, packagelist, user_selected=False):
-        left = []
-        binb = 'User Selected' if user_selected else ''
-        for pn in packagelist:
-            if pn in self.pn_path.keys():
-                path = self.pn_path[pn]
-                self.include_item(item_path=path, binb=binb)
-            else:
-                left.append(pn)
-
-        self.selection_change_notification()
-        return left
-
-    """
-    Return the selected package size, unit is B.
-    """
-    def get_packages_size(self):
-        packages_size = 0
-        it = self.get_iter_first()
-        while it:
-            if self.get_value(it, self.COL_INC):
-                str_size = self.get_value(it, self.COL_SIZE)
-                if not str_size:
-                    continue
-
-                packages_size += HobPage._string_to_size(str_size)
-
-            it = self.iter_next(it)
-        return packages_size
-
-    """
-    Resync the state of included items to a backup column before performing the fadeout visible effect
-    """
-    def resync_fadeout_column(self, model_first_iter=None):
-        it = model_first_iter
-        while it:
-            active = self.get_value(it, self.COL_INC)
-            self.set(it, self.COL_FADE_INC, active)
-            it = self.iter_next(it)
-
-#
-# RecipeListModel
-#
-class RecipeListModel(gtk.ListStore):
-    """
-    This class defines an gtk.ListStore subclass which will convert the output
-    of the bb.event.TargetsTreeGenerated event into a gtk.ListStore whilst also
-    providing convenience functions to access gtk.TreeModel subclasses which
-    provide filtered views of the data.
-    """
-    (COL_NAME, COL_DESC, COL_LIC, COL_GROUP, COL_DEPS, COL_BINB, COL_TYPE, COL_INC, COL_IMG, COL_INSTALL, COL_PN, COL_FADE_INC, COL_SUMMARY, COL_VERSION,
-     COL_REVISION, COL_HOMEPAGE, COL_BUGTRACKER) = range(17)
-
-    __custom_image__ = "Create your own image"
-
-    __gsignals__ = {
-        "recipe-selection-changed" : (gobject.SIGNAL_RUN_LAST,
-                                  gobject.TYPE_NONE,
-                                 ()),
-        }
-
-    """
-    """
-    def __init__(self):
-        gtk.ListStore.__init__ (self,
-                                gobject.TYPE_STRING,
-                                gobject.TYPE_STRING,
-                                gobject.TYPE_STRING,
-                                gobject.TYPE_STRING,
-                                gobject.TYPE_STRING,
-                                gobject.TYPE_STRING,
-                                gobject.TYPE_STRING,
-                                gobject.TYPE_BOOLEAN,
-                                gobject.TYPE_BOOLEAN,
-                                gobject.TYPE_STRING,
-                                gobject.TYPE_STRING,
-                                gobject.TYPE_BOOLEAN,
-                                gobject.TYPE_STRING,
-                                gobject.TYPE_STRING,
-                                gobject.TYPE_STRING,
-                                gobject.TYPE_STRING,
-                                gobject.TYPE_STRING)
-
-    """
-    Find the model path for the item_name
-    Returns the path in the model or None
-    """
-    def find_path_for_item(self, item_name):
-        if self.non_target_name(item_name) or item_name not in self.pn_path.keys():
-            return None
-        else:
-            return self.pn_path[item_name]
-
-    def find_item_for_path(self, item_path):
-        return self[item_path][self.COL_NAME]
-
-    """
-    Helper method to determine whether name is a target pn
-    """
-    def non_target_name(self, name):
-        if name and ('-native' in name):
-            return True
-        return False
-
-    """
-    Helper function to determine whether an item is an item specified by filter
-    """
-    def tree_model_filter(self, model, it, filter):
-        name = model.get_value(it, self.COL_NAME)
-        if self.non_target_name(name):
-            return False
-
-        for key in filter.keys():
-            if key == self.COL_NAME:
-                if filter[key] != 'Search recipes by name' and filter[key] != 'Search package groups by name':
-                    if filter[key] not in name:
-                        return False
-            else:
-                if model.get_value(it, key) not in filter[key]:
-                    return False
-        self.filtered_nb += 1
-
-        return True
-
-    def exclude_item_sort_func(self, model, iter1, iter2, user_data=None):
-        if user_data:
-            val1 = model.get_value(iter1, RecipeListModel.COL_NAME)
-            val2 = model.get_value(iter2, RecipeListModel.COL_NAME)
-            if val1.startswith(user_data) and not val2.startswith(user_data):
-                return -1
-            elif not val1.startswith(user_data) and val2.startswith(user_data):
-                return 1
-            else:
-                return 0
-        else:
-            val1 = model.get_value(iter1, RecipeListModel.COL_FADE_INC)
-            val2 = model.get_value(iter2, RecipeListModel.COL_INC)
-            return ((val1 == True) and (val2 == False))
-
-    def include_item_sort_func(self, model, iter1, iter2, user_data=None):
-        if user_data:
-            val1 = model.get_value(iter1, RecipeListModel.COL_NAME)
-            val2 = model.get_value(iter2, RecipeListModel.COL_NAME)
-            if val1.startswith(user_data) and not val2.startswith(user_data):
-                return -1
-            elif not val1.startswith(user_data) and val2.startswith(user_data):
-                return 1
-            else:
-                return 0
-        else:
-            val1 = model.get_value(iter1, RecipeListModel.COL_INC)
-            val2 = model.get_value(iter2, RecipeListModel.COL_INC)
-            return ((val1 == False) and (val2 == True))
-
-    def sort_func(self, model, iter1, iter2, user_data):
-        val1 = model.get_value(iter1, RecipeListModel.COL_NAME)
-        val2 = model.get_value(iter2, RecipeListModel.COL_NAME)
-        if val1 is None or val2 is None:
-            return 0
-        elif val1.startswith(user_data) and not val2.startswith(user_data):
-            return -1
-        elif not val1.startswith(user_data) and val2.startswith(user_data):
-            return 1
-        else:
-            return 0
-
-    """
-    Create, if required, and return a filtered gtk.TreeModelSort
-    containing only the items specified by filter
-    """
-    def tree_model(self, filter, excluded_items_ahead=False, included_items_ahead=False, search_data=None, initial=False):
-        model = self.filter_new()
-        self.filtered_nb = 0
-        model.set_visible_func(self.tree_model_filter, filter)
-
-        sort = gtk.TreeModelSort(model)
-        if initial:
-            sort.set_sort_column_id(RecipeListModel.COL_NAME, gtk.SORT_ASCENDING)
-            sort.set_default_sort_func(None)
-
-        if excluded_items_ahead:
-            sort.set_default_sort_func(self.exclude_item_sort_func, search_data)
-        elif included_items_ahead:
-            sort.set_default_sort_func(self.include_item_sort_func, search_data)
-        else:
-            if search_data and search_data!='Search recipes by name' and search_data!='Search package groups by name':
-                sort.set_default_sort_func(self.sort_func, search_data)
-            else:
-                sort.set_sort_column_id(RecipeListModel.COL_NAME, gtk.SORT_ASCENDING)
-                sort.set_default_sort_func(None)
-
-        sort.set_sort_func(RecipeListModel.COL_INC, self.sort_column, RecipeListModel.COL_INC)
-        sort.set_sort_func(RecipeListModel.COL_GROUP, self.sort_column, RecipeListModel.COL_GROUP)
-        sort.set_sort_func(RecipeListModel.COL_BINB, self.sort_column, RecipeListModel.COL_BINB)
-        sort.set_sort_func(RecipeListModel.COL_LIC, self.sort_column, RecipeListModel.COL_LIC)
-        return sort
-
-    def sort_column(self, model, row1, row2, col):
-        value1 = model.get_value(row1, col)
-        value2 = model.get_value(row2, col)
-        cmp_res = cmp(value1, value2)
-        if cmp_res!=0:
-            if col==RecipeListModel.COL_INC:
-                return -cmp_res
-            else:
-                return cmp_res
-        else:
-            name1 = model.get_value(row1, RecipeListModel.COL_NAME)
-            name2 = model.get_value(row2, RecipeListModel.COL_NAME)
-            return cmp(name1,name2)
-
-    def convert_vpath_to_path(self, view_model, view_path):
-        filtered_model_path = view_model.convert_path_to_child_path(view_path)
-        filtered_model = view_model.get_model()
-
-        # get the path of the original model
-        path = filtered_model.convert_path_to_child_path(filtered_model_path)
-        return path
-
-    def convert_path_to_vpath(self, view_model, path):
-        it = view_model.get_iter_first()
-        while it:
-            name = self.find_item_for_path(path)
-            view_name = view_model.get_value(it, RecipeListModel.COL_NAME)
-            if view_name == name:
-                view_path = view_model.get_path(it)
-                return view_path
-            it = view_model.iter_next(it)
-        return None
-
-    """
-    The populate() function takes as input the data from a
-    bb.event.TargetsTreeGenerated event and populates the RecipeList.
-    """
-    def populate(self, event_model):
-        # First clear the model, in case repopulating
-        self.clear()
-
-        # dummy image for prompt
-        self.set(self.append(), self.COL_NAME, self.__custom_image__,
-                 self.COL_DESC, "Use 'Edit image' to customize recipes and packages " \
-                                "to be included in your image ",
-                 self.COL_LIC, "", self.COL_GROUP, "",
-                 self.COL_DEPS, "", self.COL_BINB, "",
-                 self.COL_TYPE, "image", self.COL_INC, False,
-                 self.COL_IMG, False, self.COL_INSTALL, "", self.COL_PN, self.__custom_image__,
-                 self.COL_SUMMARY, "", self.COL_VERSION, "", self.COL_REVISION, "",
-                 self.COL_HOMEPAGE, "", self.COL_BUGTRACKER, "")
-
-        for item in event_model["pn"]:
-            name = item
-            desc = event_model["pn"][item]["description"]
-            lic = event_model["pn"][item]["license"]
-            group = event_model["pn"][item]["section"]
-            inherits = event_model["pn"][item]["inherits"]
-            summary = event_model["pn"][item]["summary"]
-            version = event_model["pn"][item]["version"]
-            revision = event_model["pn"][item]["revision"]
-            homepage = event_model["pn"][item]["homepage"]
-            bugtracker = event_model["pn"][item]["bugtracker"]
-            install = []
-
-            depends = event_model["depends"].get(item, []) + event_model["rdepends-pn"].get(item, [])
-
-            if ('packagegroup.bbclass' in " ".join(inherits)):
-                atype = 'packagegroup'
-            elif ('image.bbclass' in " ".join(inherits)):
-                if name != "hob-image":
-                    atype = 'image'
-                    install = event_model["rdepends-pkg"].get(item, []) + event_model["rrecs-pkg"].get(item, [])
-            elif ('meta-' in name):
-                atype = 'toolchain'
-            elif (name == 'dummy-image' or name == 'dummy-toolchain'):
-                atype = 'dummy'
-            else:
-                atype = 'recipe'
-
-            self.set(self.append(), self.COL_NAME, item, self.COL_DESC, desc,
-                     self.COL_LIC, lic, self.COL_GROUP, group,
-                     self.COL_DEPS, " ".join(depends), self.COL_BINB, "",
-                     self.COL_TYPE, atype, self.COL_INC, False,
-                     self.COL_IMG, False, self.COL_INSTALL, " ".join(install), self.COL_PN, item,
-                     self.COL_SUMMARY, summary, self.COL_VERSION, version, self.COL_REVISION, revision,
-                     self.COL_HOMEPAGE, homepage, self.COL_BUGTRACKER, bugtracker)
-
-        self.pn_path = {}
-        it = self.get_iter_first()
-        while it:
-            pn = self.get_value(it, self.COL_NAME)
-            path = self.get_path(it)
-            self.pn_path[pn] = path
-            it = self.iter_next(it)
-
-    """
-    Update the model, send out the notification.
-    """
-    def selection_change_notification(self):
-        self.emit("recipe-selection-changed")
-
-    def path_included(self, item_path):
-        return self[item_path][self.COL_INC]
-
-    """
-    Add this item, and any of its dependencies, to the image contents
-    """
-    def include_item(self, item_path, binb="", image_contents=False):
-        if self.path_included(item_path):
-            return
-
-        item_name = self[item_path][self.COL_NAME]
-        item_deps = self[item_path][self.COL_DEPS]
-
-        self[item_path][self.COL_INC] = True
-
-        item_bin = self[item_path][self.COL_BINB].split(', ')
-        if binb and not binb in item_bin:
-            item_bin.append(binb)
-            self[item_path][self.COL_BINB] = ', '.join(item_bin).lstrip(', ')
-
-        # We want to do some magic with things which are brought in by the
-        # base image so tag them as so
-        if image_contents:
-            self[item_path][self.COL_IMG] = True
-
-        if item_deps:
-            # Ensure all of the items deps are included and, where appropriate,
-            # add this item to their COL_BINB
-            for dep in item_deps.split(" "):
-                # If the contents model doesn't already contain dep, add it
-                dep_path = self.find_path_for_item(dep)
-                if not dep_path:
-                    continue
-                dep_included = self.path_included(dep_path)
-
-                if dep_included and not dep in item_bin:
-                    # don't set the COL_BINB to this item if the target is an
-                    # item in our own COL_BINB
-                    dep_bin = self[dep_path][self.COL_BINB].split(', ')
-                    if not item_name in dep_bin:
-                        dep_bin.append(item_name)
-                        self[dep_path][self.COL_BINB] = ', '.join(dep_bin).lstrip(', ')
-                elif not dep_included:
-                    self.include_item(dep_path, binb=item_name, image_contents=image_contents)
-        dep_bin = self[item_path][self.COL_BINB].split(', ')
-        if self[item_path][self.COL_NAME] in dep_bin:
-            dep_bin.remove(self[item_path][self.COL_NAME])
-        self[item_path][self.COL_BINB] = ', '.join(dep_bin).lstrip(', ')
-
-    def exclude_item(self, item_path):
-        if not self.path_included(item_path):
-            return
-
-        self[item_path][self.COL_INC] = False
-
-        item_name = self[item_path][self.COL_NAME]
-        item_deps = self[item_path][self.COL_DEPS]
-        if item_deps:
-            for dep in item_deps.split(" "):
-                dep_path = self.find_path_for_item(dep)
-                if not dep_path:
-                    continue
-                dep_bin = self[dep_path][self.COL_BINB].split(', ')
-                if item_name in dep_bin:
-                    dep_bin.remove(item_name)
-                    self[dep_path][self.COL_BINB] = ', '.join(dep_bin).lstrip(', ')
-
-        item_bin = self[item_path][self.COL_BINB].split(', ')
-        if item_bin:
-            for binb in item_bin:
-                binb_path = self.find_path_for_item(binb)
-                if not binb_path:
-                    continue
-                self.exclude_item(binb_path)
-
-    def reset(self):
-        it = self.get_iter_first()
-        while it:
-            self.set(it,
-                     self.COL_INC, False,
-                     self.COL_BINB, "",
-                     self.COL_IMG, False)
-            it = self.iter_next(it)
-
-        self.selection_change_notification()
-
-    """
-    Returns two lists. One of user selected recipes and the other containing
-    all selected recipes
-    """
-    def get_selected_recipes(self):
-        allrecipes = []
-        userrecipes = []
-
-        it = self.get_iter_first()
-        while it:
-            if self.get_value(it, self.COL_INC):
-                name = self.get_value(it, self.COL_PN)
-                type = self.get_value(it, self.COL_TYPE)
-                if type != "image":
-                    allrecipes.append(name)
-                    sel = "User Selected" in self.get_value(it, self.COL_BINB)
-                    if sel:
-                        userrecipes.append(name)
-            it = self.iter_next(it)
-
-        return list(set(userrecipes)), list(set(allrecipes))
-
-    def set_selected_recipes(self, recipelist):
-        for pn in recipelist:
-            if pn in self.pn_path.keys():
-                path = self.pn_path[pn]
-                self.include_item(item_path=path,
-                                  binb="User Selected")
-        self.selection_change_notification()
-
-    def get_selected_image(self):
-        it = self.get_iter_first()
-        while it:
-            if self.get_value(it, self.COL_INC):
-                name = self.get_value(it, self.COL_PN)
-                type = self.get_value(it, self.COL_TYPE)
-                if type == "image":
-                    sel = "User Selected" in self.get_value(it, self.COL_BINB)
-                    if sel:
-                        return name
-            it = self.iter_next(it)
-        return None
-
-    def set_selected_image(self, img):
-        if not img:
-            return
-        self.reset()
-        path = self.find_path_for_item(img)
-        self.include_item(item_path=path,
-                          binb="User Selected",
-                          image_contents=True)
-        self.selection_change_notification()
-
-    def set_custom_image_version(self, version):
-        self.custom_image_version = version
-
-    def get_custom_image_version(self):
-        return self.custom_image_version

bitbake/lib/bb/ui/crumbs/hobpages.py

@@ -1,128 +0,0 @@
-#!/usr/bin/env python
-#
-# BitBake Graphical GTK User Interface
-#
-# Copyright (C) 2012        Intel Corporation
-#
-# Authored by Dongxiao Xu <dongxiao.xu@intel.com>
-# Authored by Shane Wang <shane.wang@intel.com>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-import gtk
-from bb.ui.crumbs.hobcolor import HobColors
-from bb.ui.crumbs.hobwidget import hwc
-
-#
-# HobPage: the super class for all Hob-related pages
-#    
-class HobPage (gtk.VBox):
-
-    def __init__(self, builder, title = None):
-        super(HobPage, self).__init__(False, 0)
-        self.builder = builder
-        self.builder_width, self.builder_height = self.builder.size_request()
-
-        if not title:
-            self.title = "Hob -- Image Creator"
-        else:
-            self.title = title
-        self.title_label = gtk.Label()
-
-        self.box_group_area = gtk.VBox(False, 12)
-        self.box_group_area.set_size_request(self.builder_width - 73 - 73, self.builder_height - 88 - 15 - 15)
-        self.group_align = gtk.Alignment(xalign = 0, yalign=0.5, xscale=1, yscale=1)
-        self.group_align.set_padding(15, 15, 73, 73)
-        self.group_align.add(self.box_group_area)
-        self.box_group_area.set_homogeneous(False)
-
-    def set_title(self, title):
-        self.title = title
-        self.title_label.set_markup("<span size='x-large'>%s</span>" % self.title)
-
-    def add_onto_top_bar(self, widget = None, padding = 0):
-        # the top button occupies 1/7 of the page height
-        # setup an event box
-        eventbox = gtk.EventBox()
-        style = eventbox.get_style().copy()
-        style.bg[gtk.STATE_NORMAL] = eventbox.get_colormap().alloc_color(HobColors.LIGHT_GRAY, False, False)
-        eventbox.set_style(style)
-        eventbox.set_size_request(-1, 88)
-
-        hbox = gtk.HBox()
-
-        self.title_label = gtk.Label()
-        self.title_label.set_markup("<span size='x-large'>%s</span>" % self.title)
-        hbox.pack_start(self.title_label, expand=False, fill=False, padding=20)
-
-        if widget:
-            # add the widget in the event box
-            hbox.pack_end(widget, expand=False, fill=False, padding=padding)
-        eventbox.add(hbox)
-
-        return eventbox
-
-    def span_tag(self, size="medium", weight="normal", forground="#1c1c1c"):
-        span_tag = "weight='%s' foreground='%s' size='%s'" % (weight, forground, size)
-        return span_tag
-
-    def append_toolbar_button(self, toolbar, buttonname, icon_disp, icon_hovor, tip, cb):
-        # Create a button and append it on the toolbar according to button name
-        icon = gtk.Image()
-        icon_display = icon_disp
-        icon_hover = icon_hovor
-        pix_buffer = gtk.gdk.pixbuf_new_from_file(icon_display)
-        icon.set_from_pixbuf(pix_buffer)
-        tip_text = tip
-        button = toolbar.append_item(buttonname, tip, None, icon, cb)
-        return button
-
-    @staticmethod
-    def _size_to_string(size):
-        try:
-            if not size:
-                size_str = "0 B"
-            else:
-                if len(str(int(size))) > 6:
-                    size_str = '%.1f' % (size*1.0/(1024*1024)) + ' MB'
-                elif len(str(int(size))) > 3:
-                    size_str = '%.1f' % (size*1.0/1024) + ' KB'
-                else:
-                    size_str = str(size) + ' B'
-        except:
-            size_str = "0 B"
-        return size_str
-
-    @staticmethod
-    def _string_to_size(str_size):
-        try:
-            if not str_size:
-                size = 0
-            else:
-                unit = str_size.split()
-                if len(unit) > 1:
-                    if unit[1] == 'MB':
-                        size = float(unit[0])*1024*1024
-                    elif unit[1] == 'KB':
-                        size = float(unit[0])*1024
-                    elif unit[1] == 'B':
-                        size = float(unit[0])
-                    else:
-                        size = 0
-                else:
-                    size = float(unit[0])
-        except:
-            size = 0
-        return size
-

bitbake/lib/bb/ui/crumbs/hobprefs.py

@@ -0,0 +1,335 @@
+#
+# BitBake Graphical GTK User Interface
+#
+# Copyright (C) 2011        Intel Corporation
+#
+# Authored by Joshua Lock <josh@linux.intel.com>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+
+import gtk
+import glib
+from bb.ui.crumbs.configurator import Configurator
+
+class HobPrefs(gtk.Dialog):
+    """
+    """
+    def empty_combo_text(self, combo_text):
+        model = combo_text.get_model()
+        if model:
+            model.clear()
+
+    def output_type_toggled_cb(self, check, handler):
+        ot = check.get_label()
+        enabled = check.get_active()
+        if enabled:
+            self.selected_image_types = handler.add_image_output_type(ot)
+        else:
+            self.selected_image_types = handler.remove_image_output_type(ot)
+
+        self.configurator.setLocalConfVar('IMAGE_FSTYPES', "%s" % self.selected_image_types)
+
+    def sdk_machine_combo_changed_cb(self, combo, handler):
+        sdk_mach = combo.get_active_text()
+	if sdk_mach != self.curr_sdk_mach:
+            self.curr_sdk_mach = sdk_mach
+            self.configurator.setLocalConfVar('SDKMACHINE', sdk_mach)
+            handler.set_sdk_machine(sdk_mach)
+
+    def update_sdk_machines(self, handler, sdk_machines):
+        active = 0
+        # disconnect the signal handler before updating the combo model
+        if self.sdk_machine_handler_id:
+            self.sdk_machine_combo.disconnect(self.sdk_machine_handler_id)
+            self.sdk_machine_handler_id = None
+
+        self.empty_combo_text(self.sdk_machine_combo)
+        for sdk_machine in sdk_machines:
+            self.sdk_machine_combo.append_text(sdk_machine)
+            if sdk_machine == self.curr_sdk_mach:
+                self.sdk_machine_combo.set_active(active)
+            active = active + 1
+
+        self.sdk_machine_handler_id = self.sdk_machine_combo.connect("changed", self.sdk_machine_combo_changed_cb, handler)
+
+    def distro_combo_changed_cb(self, combo, handler):
+        distro = combo.get_active_text()
+	if distro != self.curr_distro:
+            self.curr_distro = distro
+            self.configurator.setLocalConfVar('DISTRO', distro)
+            handler.set_distro(distro)
+            self.reload_required = True
+
+    def update_distros(self, handler, distros):
+        active = 0
+        # disconnect the signal handler before updating combo model
+        if self.distro_handler_id:
+            self.distro_combo.disconnect(self.distro_handler_id)
+            self.distro_handler_id = None
+
+        self.empty_combo_text(self.distro_combo)
+	for distro in distros:
+	    self.distro_combo.append_text(distro)
+	    if distro == self.curr_distro:
+                self.distro_combo.set_active(active)
+	    active = active + 1
+
+	self.distro_handler_id = self.distro_combo.connect("changed", self.distro_combo_changed_cb, handler)
+
+    def package_format_combo_changed_cb(self, combo, handler):
+        package_format = combo.get_active_text()
+        if package_format != self.curr_package_format:
+            self.curr_package_format = package_format
+            self.configurator.setLocalConfVar('PACKAGE_CLASSES', 'package_%s' % package_format)
+            handler.set_package_format(package_format)
+            self.reload_required = True
+
+    def update_package_formats(self, handler, formats):
+        active = 0
+        # disconnect the signal handler before updating the model
+        if self.package_handler_id:
+            self.package_combo.disconnect(self.package_handler_id)
+            self.package_handler_id = None
+
+        self.empty_combo_text(self.package_combo)
+        for format in formats:
+            self.package_combo.append_text(format)
+            if format == self.curr_package_format:
+                self.package_combo.set_active(active)
+            active = active + 1
+
+        self.package_handler_id = self.package_combo.connect("changed", self.package_format_combo_changed_cb, handler)
+    
+    def include_gplv3_cb(self, toggle):
+        excluded = toggle.get_active()
+        orig_incompatible = self.configurator.getLocalConfVar('INCOMPATIBLE_LICENSE')
+        new_incompatible = ""
+        if excluded:
+            if not orig_incompatible:
+                new_incompatible = "GPLv3"
+            elif not orig_incompatible.find('GPLv3'):
+                new_incompatible = "%s GPLv3" % orig_incompatible
+        else:
+            new_incompatible = orig_incompatible.replace('GPLv3', '')
+
+        if new_incompatible != orig_incompatible:
+            self.handler.set_incompatible_license(new_incompatible)
+            self.configurator.setLocalConfVar('INCOMPATIBLE_LICENSE', new_incompatible)
+            self.reload_required = True
+
+    def change_bb_threads_cb(self, spinner):
+        val = spinner.get_value_as_int()
+        self.handler.set_bbthreads(val)
+        self.configurator.setLocalConfVar('BB_NUMBER_THREADS', val)
+
+    def change_make_threads_cb(self, spinner):
+        val = spinner.get_value_as_int()
+        self.handler.set_pmake(val)
+        self.configurator.setLocalConfVar('PARALLEL_MAKE', "-j %s" % val)
+
+    def toggle_toolchain_cb(self, check):
+        enabled = check.get_active()
+        toolchain = '0'
+        if enabled:
+            toolchain = '1'
+        self.handler.toggle_toolchain(enabled)
+        self.configurator.setLocalConfVar('HOB_BUILD_TOOLCHAIN', toolchain)
+
+    def toggle_headers_cb(self, check):
+        enabled = check.get_active()
+        headers = '0'
+        if enabled:
+            headers = '1'
+        self.handler.toggle_toolchain_headers(enabled)
+        self.configurator.setLocalConfVar('HOB_BUILD_TOOLCHAIN_HEADERS', headers)
+
+    def set_parent_window(self, parent):
+        self.set_transient_for(parent)
+
+    def write_changes(self):
+        self.configurator.writeLocalConf()
+
+    def prefs_response_cb(self, dialog, response):
+        if self.reload_required:
+            glib.idle_add(self.handler.reload_data)
+
+    def __init__(self, configurator, handler, curr_sdk_mach, curr_distro, pclass,
+                 cpu_cnt, pmake, bbthread, selected_image_types, all_image_types,
+                 gplv3disabled, build_toolchain, build_toolchain_headers):
+        """
+        """
+        gtk.Dialog.__init__(self, "Preferences", None,
+                            gtk.DIALOG_DESTROY_WITH_PARENT,
+                            (gtk.STOCK_CLOSE, gtk.RESPONSE_OK))
+
+        self.set_border_width(6)
+        self.vbox.set_property("spacing", 12)
+        self.action_area.set_property("spacing", 12)
+        self.action_area.set_property("border-width", 6)
+
+        self.handler = handler
+        self.configurator = configurator
+
+        self.curr_sdk_mach = curr_sdk_mach
+        self.curr_distro = curr_distro
+        self.curr_package_format = pclass
+        self.cpu_cnt = cpu_cnt
+        self.pmake = pmake
+        self.bbthread = bbthread
+        self.selected_image_types = selected_image_types.split(" ")
+        self.gplv3disabled = gplv3disabled
+        self.build_toolchain = build_toolchain
+        self.build_toolchain_headers = build_toolchain_headers
+
+        self.reload_required = False
+        self.distro_handler_id = None
+        self.sdk_machine_handler_id = None
+        self.package_handler_id = None
+
+        left = gtk.SizeGroup(gtk.SIZE_GROUP_HORIZONTAL)
+        right = gtk.SizeGroup(gtk.SIZE_GROUP_HORIZONTAL)
+
+        label = gtk.Label()
+        label.set_markup("<b>Policy</b>")
+        label.show()
+        frame = gtk.Frame()
+        frame.set_label_widget(label)
+        frame.set_shadow_type(gtk.SHADOW_NONE)
+        frame.show()
+        self.vbox.pack_start(frame)
+        pbox = gtk.VBox(False, 12)
+        pbox.show()
+        frame.add(pbox)
+        hbox = gtk.HBox(False, 12)
+        hbox.show()
+        pbox.pack_start(hbox, expand=False, fill=False, padding=6)
+        # Distro selector
+        label = gtk.Label("Distribution:")
+        label.show()
+        hbox.pack_start(label, expand=False, fill=False, padding=6)
+        self.distro_combo = gtk.combo_box_new_text()
+        self.distro_combo.set_tooltip_text("Select the Yocto distribution you would like to use")
+        self.distro_combo.show()
+        hbox.pack_start(self.distro_combo, expand=False, fill=False, padding=6)
+        # Exclude GPLv3
+        check = gtk.CheckButton("Exclude GPLv3 packages")
+        check.set_tooltip_text("Check this box to prevent GPLv3 packages from being included in your image")
+        check.show()
+        check.set_active(self.gplv3disabled)
+        check.connect("toggled", self.include_gplv3_cb)
+        hbox.pack_start(check, expand=False, fill=False, padding=6)
+        hbox = gtk.HBox(False, 12)
+        hbox.show()
+        pbox.pack_start(hbox, expand=False, fill=False, padding=6)
+        # Package format selector
+        label = gtk.Label("Package format:")
+        label.show()
+        hbox.pack_start(label, expand=False, fill=False, padding=6)
+        self.package_combo = gtk.combo_box_new_text()
+        self.package_combo.set_tooltip_text("""The package format is that used in creation
+ of the root filesystem and also dictates the package manager used in your image""")
+        self.package_combo.show()
+        hbox.pack_start(self.package_combo, expand=False, fill=False, padding=6)
+        if all_image_types:
+            # Image output type selector
+            label = gtk.Label("Image output types:")
+            label.show()
+            hbox.pack_start(label, expand=False, fill=False, padding=6)
+            chk_cnt = 3
+            for it in all_image_types.split(" "):
+                chk_cnt = chk_cnt + 1
+                if chk_cnt % 6 == 0:
+                    hbox = gtk.HBox(False, 12)
+                    hbox.show()
+                    pbox.pack_start(hbox, expand=False, fill=False, padding=6)
+                chk = gtk.CheckButton(it)
+                if it in self.selected_image_types:
+                    chk.set_active(True)
+                chk.set_tooltip_text("Build an %s image" % it)
+                chk.connect("toggled", self.output_type_toggled_cb, handler)
+                chk.show()
+                hbox.pack_start(chk, expand=False, fill=False, padding=3)
+        # BitBake
+        label = gtk.Label()
+        label.set_markup("<b>BitBake</b>")
+        label.show()
+        frame = gtk.Frame()
+        frame.set_label_widget(label)
+        frame.set_shadow_type(gtk.SHADOW_NONE)
+        frame.show()
+        self.vbox.pack_start(frame)
+        pbox = gtk.VBox(False, 12)
+        pbox.show()
+        frame.add(pbox)
+        hbox = gtk.HBox(False, 12)
+        hbox.show()
+        pbox.pack_start(hbox, expand=False, fill=False, padding=6)
+        label = gtk.Label("BitBake threads:")
+        label.show()
+        # NOTE: may be a good idea in future to intelligently cap the maximum
+        # values but we need more data to make an educated decision, for now
+        # set a high maximum as a value for upper bounds is required by the
+        # gtk.Adjustment
+        spin_max = 30 # seems like a high enough arbitrary number
+        #spin_max = self.cpu_cnt * 3
+        hbox.pack_start(label, expand=False, fill=False, padding=6)
+        bbadj = gtk.Adjustment(value=self.bbthread, lower=1, upper=spin_max, step_incr=1)
+        bbspinner = gtk.SpinButton(adjustment=bbadj, climb_rate=1, digits=0)
+        bbspinner.show()
+        bbspinner.connect("value-changed", self.change_bb_threads_cb)
+        hbox.pack_start(bbspinner, expand=False, fill=False, padding=6)
+        label = gtk.Label("Make threads:")
+        label.show()
+        hbox.pack_start(label, expand=False, fill=False, padding=6)
+        madj = gtk.Adjustment(value=self.pmake, lower=1, upper=spin_max, step_incr=1)
+        makespinner = gtk.SpinButton(adjustment=madj, climb_rate=1, digits=0)
+        makespinner.connect("value-changed", self.change_make_threads_cb)
+        makespinner.show()
+        hbox.pack_start(makespinner, expand=False, fill=False, padding=6)
+        # Toolchain
+        label = gtk.Label()
+        label.set_markup("<b>External Toolchain</b>")
+        label.show()
+        frame = gtk.Frame()
+        frame.set_label_widget(label)
+        frame.set_shadow_type(gtk.SHADOW_NONE)
+        frame.show()
+        self.vbox.pack_start(frame)
+        pbox = gtk.VBox(False, 12)
+        pbox.show()
+        frame.add(pbox)
+        hbox = gtk.HBox(False, 12)
+        hbox.show()
+        pbox.pack_start(hbox, expand=False, fill=False, padding=6)
+        toolcheck = gtk.CheckButton("Build external development toolchain with image")
+        toolcheck.show()
+        toolcheck.set_active(self.build_toolchain)
+        toolcheck.connect("toggled", self.toggle_toolchain_cb)
+        hbox.pack_start(toolcheck, expand=False, fill=False, padding=6)
+        hbox = gtk.HBox(False, 12)
+        hbox.show()
+        pbox.pack_start(hbox, expand=False, fill=False, padding=6)
+        label = gtk.Label("Toolchain host:")
+        label.show()
+        hbox.pack_start(label, expand=False, fill=False, padding=6)
+        self.sdk_machine_combo = gtk.combo_box_new_text()
+        self.sdk_machine_combo.set_tooltip_text("Select the host architecture of the external machine")
+        self.sdk_machine_combo.show()
+        hbox.pack_start(self.sdk_machine_combo, expand=False, fill=False, padding=6)
+        headerscheck = gtk.CheckButton("Include development headers with toolchain")
+        headerscheck.show()
+        headerscheck.set_active(self.build_toolchain_headers)
+        headerscheck.connect("toggled", self.toggle_headers_cb)
+        hbox.pack_start(headerscheck, expand=False, fill=False, padding=6)
+        self.connect("response", self.prefs_response_cb)

bitbake/lib/bb/ui/crumbs/hobwidget.py

@@ -1,904 +0,0 @@
-# BitBake Graphical GTK User Interface
-#
-# Copyright (C) 2011-2012   Intel Corporation
-#
-# Authored by Dongxiao Xu <dongxiao.xu@intel.com>
-# Authored by Shane Wang <shane.wang@intel.com>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-import gtk
-import gobject
-import os
-import os.path
-import sys
-import pango, pangocairo
-import cairo
-import math
-
-from bb.ui.crumbs.hobcolor import HobColors
-from bb.ui.crumbs.persistenttooltip import PersistentTooltip
-
-class hwc:
-
-    MAIN_WIN_WIDTH   = 1024
-    MAIN_WIN_HEIGHT  = 700
-
-class hic:
-
-    HOB_ICON_BASE_DIR = os.path.join(os.path.dirname(os.path.dirname(os.path.dirname(__file__))), ("ui/icons/"))
-
-    ICON_RCIPE_DISPLAY_FILE       = os.path.join(HOB_ICON_BASE_DIR, ('recipe/recipe_display.png'))
-    ICON_RCIPE_HOVER_FILE         = os.path.join(HOB_ICON_BASE_DIR, ('recipe/recipe_hover.png'))
-    ICON_PACKAGES_DISPLAY_FILE    = os.path.join(HOB_ICON_BASE_DIR, ('packages/packages_display.png'))
-    ICON_PACKAGES_HOVER_FILE      = os.path.join(HOB_ICON_BASE_DIR, ('packages/packages_hover.png'))
-    ICON_LAYERS_DISPLAY_FILE      = os.path.join(HOB_ICON_BASE_DIR, ('layers/layers_display.png'))
-    ICON_LAYERS_HOVER_FILE        = os.path.join(HOB_ICON_BASE_DIR, ('layers/layers_hover.png'))
-    ICON_IMAGES_DISPLAY_FILE      = os.path.join(HOB_ICON_BASE_DIR, ('images/images_display.png'))
-    ICON_IMAGES_HOVER_FILE        = os.path.join(HOB_ICON_BASE_DIR, ('images/images_hover.png'))
-    ICON_SETTINGS_DISPLAY_FILE    = os.path.join(HOB_ICON_BASE_DIR, ('settings/settings_display.png'))
-    ICON_SETTINGS_HOVER_FILE      = os.path.join(HOB_ICON_BASE_DIR, ('settings/settings_hover.png'))
-    ICON_INFO_DISPLAY_FILE        = os.path.join(HOB_ICON_BASE_DIR, ('info/info_display.png'))
-    ICON_INFO_HOVER_FILE          = os.path.join(HOB_ICON_BASE_DIR, ('info/info_hover.png'))
-    ICON_INDI_CONFIRM_FILE        = os.path.join(HOB_ICON_BASE_DIR, ('indicators/confirmation.png'))
-    ICON_INDI_ERROR_FILE          = os.path.join(HOB_ICON_BASE_DIR, ('indicators/denied.png'))
-    ICON_INDI_REMOVE_FILE         = os.path.join(HOB_ICON_BASE_DIR, ('indicators/remove.png'))
-    ICON_INDI_REMOVE_HOVER_FILE   = os.path.join(HOB_ICON_BASE_DIR, ('indicators/remove-hover.png'))
-    ICON_INDI_ADD_FILE            = os.path.join(HOB_ICON_BASE_DIR, ('indicators/add.png'))
-    ICON_INDI_ADD_HOVER_FILE      = os.path.join(HOB_ICON_BASE_DIR, ('indicators/add-hover.png'))
-    ICON_INDI_REFRESH_FILE        = os.path.join(HOB_ICON_BASE_DIR, ('indicators/refresh.png'))
-    ICON_INDI_ALERT_FILE          = os.path.join(HOB_ICON_BASE_DIR, ('indicators/alert.png'))
-    ICON_INDI_TICK_FILE           = os.path.join(HOB_ICON_BASE_DIR, ('indicators/tick.png'))
-    ICON_INDI_INFO_FILE           = os.path.join(HOB_ICON_BASE_DIR, ('indicators/info.png'))
-
-class HobViewTable (gtk.VBox):
-    """
-    A VBox to contain the table for different recipe views and package view
-    """
-    __gsignals__ = {
-         "toggled"       : (gobject.SIGNAL_RUN_LAST,
-                            gobject.TYPE_NONE,
-                           (gobject.TYPE_PYOBJECT,
-                            gobject.TYPE_STRING,
-                            gobject.TYPE_INT,
-                            gobject.TYPE_PYOBJECT,)),
-         "row-activated" : (gobject.SIGNAL_RUN_LAST,
-                            gobject.TYPE_NONE,
-                           (gobject.TYPE_PYOBJECT,
-                            gobject.TYPE_PYOBJECT,)),
-         "cell-fadeinout-stopped" : (gobject.SIGNAL_RUN_LAST,
-                            gobject.TYPE_NONE,
-                           (gobject.TYPE_PYOBJECT,
-                            gobject.TYPE_PYOBJECT,
-                            gobject.TYPE_PYOBJECT,)),
-    }
-
-    def __init__(self, columns, name):
-        gtk.VBox.__init__(self, False, 6)
-        self.table_tree = gtk.TreeView()
-        self.table_tree.set_headers_visible(True)
-        self.table_tree.set_headers_clickable(True)
-        self.table_tree.set_rules_hint(True)
-        self.table_tree.set_enable_tree_lines(True)
-        self.table_tree.get_selection().set_mode(gtk.SELECTION_SINGLE)
-        self.toggle_columns = []
-        self.table_tree.connect("row-activated", self.row_activated_cb)
-        self.top_bar = None
-        self.tab_name = name
-
-        for i, column in enumerate(columns):
-            col_name = column['col_name']
-            col = gtk.TreeViewColumn(col_name)
-            col.set_clickable(True)
-            col.set_resizable(True)
-            if self.tab_name.startswith('Included'):
-                if col_name!='Included':
-                    col.set_sort_column_id(column['col_id'])
-            else:
-                col.set_sort_column_id(column['col_id'])
-            if 'col_min' in column.keys():
-                col.set_min_width(column['col_min'])
-            if 'col_max' in column.keys():
-                col.set_max_width(column['col_max'])
-            if 'expand' in column.keys():
-                col.set_expand(True)
-            self.table_tree.append_column(col)
-
-            if (not 'col_style' in column.keys()) or column['col_style'] == 'text':
-                cell = gtk.CellRendererText()
-                col.pack_start(cell, True)
-                col.set_attributes(cell, text=column['col_id'])
-                if 'col_t_id' in column.keys():
-                    col.add_attribute(cell, 'font', column['col_t_id'])
-            elif column['col_style'] == 'check toggle':
-                cell = HobCellRendererToggle()
-                cell.set_property('activatable', True)
-                cell.connect("toggled", self.toggled_cb, i, self.table_tree)
-                cell.connect_render_state_changed(self.stop_cell_fadeinout_cb, self.table_tree)
-                self.toggle_id = i
-                col.pack_end(cell, True)
-                col.set_attributes(cell, active=column['col_id'])
-                self.toggle_columns.append(col_name)
-                if 'col_group' in column.keys():
-                    col.set_cell_data_func(cell, self.set_group_number_cb)
-            elif column['col_style'] == 'radio toggle':
-                cell = gtk.CellRendererToggle()
-                cell.set_property('activatable', True)
-                cell.set_radio(True)
-                cell.connect("toggled", self.toggled_cb, i, self.table_tree)
-                self.toggle_id = i
-                col.pack_end(cell, True)
-                col.set_attributes(cell, active=column['col_id'])
-                self.toggle_columns.append(col_name)
-            elif column['col_style'] == 'binb':
-                cell = gtk.CellRendererText()
-                col.pack_start(cell, True)
-                col.set_cell_data_func(cell, self.display_binb_cb, column['col_id'])
-                if 'col_t_id' in column.keys():
-                    col.add_attribute(cell, 'font', column['col_t_id'])
-
-        self.scroll = gtk.ScrolledWindow()
-        self.scroll.set_policy(gtk.POLICY_NEVER, gtk.POLICY_AUTOMATIC)
-        self.scroll.add(self.table_tree)
-
-        self.pack_end(self.scroll, True, True, 0)
-
-    def add_no_result_bar(self, entry):
-        color = HobColors.KHAKI
-        self.top_bar = gtk.EventBox()
-        self.top_bar.set_size_request(-1, 70)
-        self.top_bar.modify_bg(gtk.STATE_NORMAL, gtk.gdk.color_parse(color))
-        self.top_bar.set_flags(gtk.CAN_DEFAULT)
-        self.top_bar.grab_default()
-
-        no_result_tab = gtk.Table(5, 20, True)
-        self.top_bar.add(no_result_tab)
-
-        label = gtk.Label()
-        label.set_alignment(0.0, 0.5)
-        title = "No results matching your search"
-        label.set_markup("<span size='x-large'><b>%s</b></span>" % title)
-        no_result_tab.attach(label, 1, 14, 1, 4)
-
-        clear_button = HobButton("Clear search")
-        clear_button.set_tooltip_text("Clear search query")
-        clear_button.connect('clicked', self.set_search_entry_clear_cb, entry)
-        no_result_tab.attach(clear_button, 16, 19, 1, 4)
-
-        self.pack_start(self.top_bar, False, True, 12)
-        self.top_bar.show_all()
-
-    def set_search_entry_clear_cb(self, button, search):
-        if search.get_editable() == True:
-            search.set_text("")
-        search.set_icon_sensitive(gtk.ENTRY_ICON_SECONDARY, False)
-        search.grab_focus()
-
-    def display_binb_cb(self, col, cell, model, it, col_id):
-        binb =  model.get_value(it, col_id)
-        # Just display the first item
-        if binb:
-            bin = binb.split(', ')
-            total_no = len(bin)
-            if total_no > 1 and bin[0] == "User Selected":
-                if total_no > 2:
-                    present_binb = bin[1] + ' (+' + str(total_no - 1) + ')'
-                else:
-                    present_binb = bin[1]
-            else:
-                if total_no > 1:
-                    present_binb = bin[0] + ' (+' + str(total_no - 1) + ')'
-                else:
-                    present_binb = bin[0]
-            cell.set_property('text', present_binb)
-        else:
-            cell.set_property('text', "")
-        return True
-
-    def set_model(self, tree_model):
-        self.table_tree.set_model(tree_model)
-
-    def toggle_default(self):
-        model = self.table_tree.get_model()
-        if not model:
-            return
-        iter = model.get_iter_first()
-        if iter:
-            rowpath = model.get_path(iter)
-            model[rowpath][self.toggle_id] = True
-
-    def toggled_cb(self, cell, path, columnid, tree):
-        self.emit("toggled", cell, path, columnid, tree)
-
-    def row_activated_cb(self, tree, path, view_column):
-        if not view_column.get_title() in self.toggle_columns:
-            self.emit("row-activated", tree.get_model(), path)
-
-    def stop_cell_fadeinout_cb(self, ctrl, cell, tree):
-        self.emit("cell-fadeinout-stopped", ctrl, cell, tree)
-
-    def set_group_number_cb(self, col, cell, model, iter):
-        if model and (model.iter_parent(iter) == None):
-            cell.cell_attr["number_of_children"] = model.iter_n_children(iter)
-        else:
-            cell.cell_attr["number_of_children"] = 0
-
-    def connect_group_selection(self, cb_func):
-        self.table_tree.get_selection().connect("changed", cb_func)
-
-"""
-A method to calculate a softened value for the colour of widget when in the
-provided state.
-
-widget: the widget whose style to use
-state: the state of the widget to use the style for
-
-Returns a string value representing the softened colour
-"""
-def soften_color(widget, state=gtk.STATE_NORMAL):
-    # this colour munging routine is heavily inspired bu gdu_util_get_mix_color()
-    # from gnome-disk-utility:
-    # http://git.gnome.org/browse/gnome-disk-utility/tree/src/gdu-gtk/gdu-gtk.c?h=gnome-3-0
-    blend = 0.7
-    style = widget.get_style()
-    color = style.text[state]
-    color.red = color.red * blend + style.base[state].red * (1.0 - blend)
-    color.green = color.green * blend + style.base[state].green * (1.0 - blend)
-    color.blue = color.blue * blend + style.base[state].blue * (1.0 - blend)
-    return color.to_string()
-
-class BaseHobButton(gtk.Button):
-    """
-    A gtk.Button subclass which follows the visual design of Hob for primary
-    action buttons
-
-    label: the text to display as the button's label
-    """
-    def __init__(self, label):
-        gtk.Button.__init__(self, label)
-        HobButton.style_button(self)
-
-    @staticmethod
-    def style_button(button):
-        style = button.get_style()
-        style = gtk.rc_get_style_by_paths(gtk.settings_get_default(), 'gtk-button', 'gtk-button', gobject.TYPE_NONE)
-
-        button.set_flags(gtk.CAN_DEFAULT)
-        button.grab_default()
-
-#        label = "<span size='x-large'><b>%s</b></span>" % gobject.markup_escape_text(button.get_label())
-        label = button.get_label()
-        button.set_label(label)
-        button.child.set_use_markup(True)
-
-class HobButton(BaseHobButton):
-    """
-    A gtk.Button subclass which follows the visual design of Hob for primary
-    action buttons
-
-    label: the text to display as the button's label
-    """
-    def __init__(self, label):
-        BaseHobButton.__init__(self, label)
-        HobButton.style_button(self)
-
-class HobAltButton(BaseHobButton):
-    """
-    A gtk.Button subclass which has no relief, and so is more discrete
-    """
-    def __init__(self, label):
-        BaseHobButton.__init__(self, label)
-        HobAltButton.style_button(self)
-
-    """
-    A callback for the state-changed event to ensure the text is displayed
-    differently when the widget is not sensitive
-    """
-    @staticmethod
-    def desensitise_on_state_change_cb(button, state):
-        if not button.get_property("sensitive"):
-            HobAltButton.set_text(button, False)
-        else:
-            HobAltButton.set_text(button, True)
-
-    """
-    Set the button label with an appropriate colour for the current widget state
-    """
-    @staticmethod
-    def set_text(button, sensitive=True):
-        if sensitive:
-            colour = HobColors.PALE_BLUE
-        else:
-            colour = HobColors.LIGHT_GRAY
-        button.set_label("<span size='large' color='%s'><b>%s</b></span>" % (colour, gobject.markup_escape_text(button.text)))
-        button.child.set_use_markup(True)
-
-class HobImageButton(gtk.Button):
-    """
-    A gtk.Button with an icon and two rows of text, the second of which is
-    displayed in a blended colour.
-
-    primary_text: the main button label
-    secondary_text: optional second line of text
-    icon_path: path to the icon file to display on the button
-    """
-    def __init__(self, primary_text, secondary_text="", icon_path="", hover_icon_path=""):
-        gtk.Button.__init__(self)
-        self.set_relief(gtk.RELIEF_NONE)
-
-        self.icon_path = icon_path
-        self.hover_icon_path = hover_icon_path
-
-        hbox = gtk.HBox(False, 10)
-        hbox.show()
-        self.add(hbox)
-        self.icon = gtk.Image()
-        self.icon.set_from_file(self.icon_path)
-        self.icon.set_alignment(0.5, 0.0)
-        self.icon.show()
-        if self.hover_icon_path and len(self.hover_icon_path):
-            self.connect("enter-notify-event", self.set_hover_icon_cb)
-            self.connect("leave-notify-event", self.set_icon_cb)
-        hbox.pack_start(self.icon, False, False, 0)
-        label = gtk.Label()
-        label.set_alignment(0.0, 0.5)
-        colour = soften_color(label)
-        mark = "<span size='x-large'>%s</span>\n<span size='medium' fgcolor='%s' weight='ultralight'>%s</span>" % (primary_text, colour, secondary_text)
-        label.set_markup(mark)
-        label.show()
-        hbox.pack_start(label, True, True, 0)
-
-    def set_hover_icon_cb(self, widget, event):
-        self.icon.set_from_file(self.hover_icon_path)
-
-    def set_icon_cb(self, widget, event):
-        self.icon.set_from_file(self.icon_path)
-
-class HobInfoButton(gtk.EventBox):
-    """
-    This class implements a button-like widget per the Hob visual and UX designs
-    which will display a persistent tooltip, with the contents of tip_markup, when
-    clicked.
-
-    tip_markup: the Pango Markup to be displayed in the persistent tooltip
-    """
-    def __init__(self, tip_markup, parent=None):
-        gtk.EventBox.__init__(self)
-        self.image = gtk.Image()
-        self.image.set_from_file(
-        hic.ICON_INFO_DISPLAY_FILE)
-        self.image.show()
-        self.add(self.image)
-        self.tip_markup = tip_markup
-        self.my_parent = parent
-
-        self.set_events(gtk.gdk.BUTTON_RELEASE |
-                        gtk.gdk.ENTER_NOTIFY_MASK |
-                        gtk.gdk.LEAVE_NOTIFY_MASK)
-
-        self.connect("button-release-event", self.button_release_cb)
-        self.connect("enter-notify-event", self.mouse_in_cb)
-        self.connect("leave-notify-event", self.mouse_out_cb)
-
-    """
-    When the mouse click is released emulate a button-click and show the associated
-    PersistentTooltip
-    """
-    def button_release_cb(self, widget, event):
-        from bb.ui.crumbs.hig.propertydialog import PropertyDialog
-        self.dialog = PropertyDialog(title = '',
-                    parent = self.my_parent,
-                    information = self.tip_markup,
-                    flags = gtk.DIALOG_DESTROY_WITH_PARENT
-                        | gtk.DIALOG_NO_SEPARATOR)
-
-        button = self.dialog.add_button("Close", gtk.RESPONSE_CANCEL)
-        HobAltButton.style_button(button)
-        button.connect("clicked", lambda w: self.dialog.destroy())
-        self.dialog.show_all()
-        self.dialog.run()
-
-    """
-    Change to the prelight image when the mouse enters the widget
-    """
-    def mouse_in_cb(self, widget, event):
-        self.image.set_from_file(hic.ICON_INFO_HOVER_FILE)
-
-    """
-    Change to the stock image when the mouse enters the widget
-    """
-    def mouse_out_cb(self, widget, event):
-        self.image.set_from_file(hic.ICON_INFO_DISPLAY_FILE)
-
-class HobIndicator(gtk.DrawingArea):
-    def __init__(self, count):
-        gtk.DrawingArea.__init__(self)
-        # Set no window for transparent background
-        self.set_has_window(False)
-        self.set_size_request(38,38)
-        # We need to pass through button clicks
-        self.add_events(gtk.gdk.BUTTON_PRESS_MASK | gtk.gdk.BUTTON_RELEASE_MASK)
-
-        self.connect('expose-event', self.expose)
-
-        self.count = count
-        self.color = HobColors.GRAY
-
-    def expose(self, widget, event):
-        if self.count and self.count > 0:
-            ctx = widget.window.cairo_create()
-
-            x, y, w, h = self.allocation
-
-            ctx.set_operator(cairo.OPERATOR_OVER)
-            ctx.set_source_color(gtk.gdk.color_parse(self.color))
-            ctx.translate(w/2, h/2)
-            ctx.arc(x, y, min(w,h)/2 - 2, 0, 2*math.pi)
-            ctx.fill_preserve()
-
-            layout = self.create_pango_layout(str(self.count))
-            textw, texth = layout.get_pixel_size()
-            x = (w/2)-(textw/2) + x
-            y = (h/2) - (texth/2) + y
-            ctx.move_to(x, y)
-            self.window.draw_layout(self.style.light_gc[gtk.STATE_NORMAL], int(x), int(y), layout)
-
-    def set_count(self, count):
-        self.count = count
-
-    def set_active(self, active):
-        if active:
-            self.color = HobColors.DEEP_RED
-        else:
-            self.color = HobColors.GRAY
-
-class HobTabLabel(gtk.HBox):
-    def __init__(self, text, count=0):
-        gtk.HBox.__init__(self, False, 0)
-        self.indicator = HobIndicator(count)
-        self.indicator.show()
-        self.pack_end(self.indicator, False, False)
-        self.lbl = gtk.Label(text)
-        self.lbl.set_alignment(0.0, 0.5)
-        self.lbl.show()
-        self.pack_end(self.lbl, True, True, 6)
-
-    def set_count(self, count):
-        self.indicator.set_count(count)
-
-    def set_active(self, active=True):
-        self.indicator.set_active(active)
-
-class HobNotebook(gtk.Notebook):
-    def __init__(self):
-        gtk.Notebook.__init__(self)
-        self.set_property('homogeneous', True)
-
-        self.pages = []
-
-        self.search = None
-        self.search_focus = False
-        self.page_changed = False
-
-        self.connect("switch-page", self.page_changed_cb)
-
-        self.show_all()
-
-    def page_changed_cb(self, nb, page, page_num):
-        for p, lbl in enumerate(self.pages):
-            if p == page_num:
-                lbl.set_active()
-            else:
-                lbl.set_active(False)
-
-        if self.search:
-            self.page_changed = True
-            self.reset_entry(self.search, page_num)
-
-    def append_page(self, child, tab_label, tab_tooltip=None):
-        label = HobTabLabel(tab_label)
-        if tab_tooltip:
-            label.set_tooltip_text(tab_tooltip)
-        label.set_active(False)
-        self.pages.append(label)
-        gtk.Notebook.append_page(self, child, label)
-
-    def set_entry(self, names, tips):
-        self.search = gtk.Entry()
-        self.search_names = names
-        self.search_tips = tips
-        style = self.search.get_style()
-        style.text[gtk.STATE_NORMAL] = self.get_colormap().alloc_color(HobColors.GRAY, False, False)
-        self.search.set_style(style)
-        self.search.set_text(names[0])
-        self.search.set_tooltip_text(self.search_tips[0])
-        self.search.props.has_tooltip = True
-
-        self.search.set_editable(False)
-        self.search.set_icon_from_stock(gtk.ENTRY_ICON_SECONDARY, gtk.STOCK_CLEAR)
-        self.search.set_icon_sensitive(gtk.ENTRY_ICON_SECONDARY, False)
-        self.search.connect("icon-release", self.set_search_entry_clear_cb)
-        self.search.set_width_chars(30)
-        self.search.show()
-
-        self.search.connect("focus-in-event", self.set_search_entry_editable_cb)
-        self.search.connect("focus-out-event", self.set_search_entry_reset_cb)
-        self.set_action_widget(self.search, gtk.PACK_END)
-
-    def show_indicator_icon(self, title, number):
-        for child in self.pages:
-            if child.lbl.get_label() == title:
-                child.set_count(number)
-
-    def hide_indicator_icon(self, title):
-        for child in self.pages:
-            if child.lbl.get_label() == title:
-                child.set_count(0)
-
-    def set_search_entry_editable_cb(self, search, event):
-        self.search_focus = True
-        search.set_editable(True)
-        text = search.get_text()
-        if text in self.search_names:
-            search.set_text("")
-        style = self.search.get_style()
-        style.text[gtk.STATE_NORMAL] = self.get_colormap().alloc_color(HobColors.BLACK, False, False)
-        search.set_style(style)
-
-    def set_search_entry_reset_cb(self, search, event):
-        page_num = self.get_current_page()
-        text = search.get_text()
-        if not text:
-            self.reset_entry(search, page_num)
-
-    def reset_entry(self, entry, page_num):
-        style = entry.get_style()
-        style.text[gtk.STATE_NORMAL] = self.get_colormap().alloc_color(HobColors.GRAY, False, False)
-        entry.set_style(style)
-        entry.set_text(self.search_names[page_num])
-        entry.set_tooltip_text(self.search_tips[page_num])
-        entry.set_editable(False)
-        entry.set_icon_sensitive(gtk.ENTRY_ICON_SECONDARY, False)
-
-    def set_search_entry_clear_cb(self, search, icon_pos, event):
-        if search.get_editable() == True:
-            search.set_text("")
-        search.set_icon_sensitive(gtk.ENTRY_ICON_SECONDARY, False)
-        search.grab_focus()
-
-    def set_page(self, title):
-        for child in self.pages:
-            if child.lbl.get_label() == title:
-                child.grab_focus()
-                self.set_current_page(self.pages.index(child))
-                return
-
-class HobWarpCellRendererText(gtk.CellRendererText):
-    def __init__(self, col_number):
-        gtk.CellRendererText.__init__(self)
-        self.set_property("wrap-mode", pango.WRAP_WORD_CHAR)
-        self.set_property("wrap-width", 300) # default value wrap width is 300
-        self.col_n = col_number
-
-    def do_render(self, window, widget, background_area, cell_area, expose_area, flags):
-        if widget:
-            self.props.wrap_width = self.get_resized_wrap_width(widget, widget.get_column(self.col_n))
-        return gtk.CellRendererText.do_render(self, window, widget, background_area, cell_area, expose_area, flags)
-
-    def get_resized_wrap_width(self, treeview, column):
-        otherCols = []
-        for col in treeview.get_columns():
-            if col != column:
-                otherCols.append(col)
-        adjwidth = treeview.allocation.width - sum(c.get_width() for c in otherCols)
-        adjwidth -= treeview.style_get_property("horizontal-separator") * 4
-        if self.props.wrap_width == adjwidth or adjwidth <= 0:
-                adjwidth = self.props.wrap_width
-        return adjwidth
-
-gobject.type_register(HobWarpCellRendererText)
-
-class HobIconChecker(hic):
-    def set_hob_icon_to_stock_icon(self, file_path, stock_id=""):
-        try:
-            pixbuf = gtk.gdk.pixbuf_new_from_file(file_path)
-        except Exception, e:
-            return None
-
-        if stock_id and (gtk.icon_factory_lookup_default(stock_id) == None):
-            icon_factory = gtk.IconFactory()
-            icon_factory.add_default()
-            icon_factory.add(stock_id, gtk.IconSet(pixbuf))
-            gtk.stock_add([(stock_id, '_label', 0, 0, '')])
-
-            return icon_factory.lookup(stock_id)
-
-        return None
-
-    """
-    For make hob icon consistently by request, and avoid icon view diff by system or gtk version, we use some 'hob icon' to replace the 'gtk icon'.
-    this function check the stock_id and make hob_id to replaced the gtk_id then return it or ""
-    """
-    def check_stock_icon(self, stock_name=""):
-        HOB_CHECK_STOCK_NAME = {
-            ('hic-dialog-info', 'gtk-dialog-info', 'dialog-info')           : self.ICON_INDI_INFO_FILE,
-            ('hic-ok',          'gtk-ok',           'ok')                   : self.ICON_INDI_TICK_FILE,
-            ('hic-dialog-error', 'gtk-dialog-error', 'dialog-error')        : self.ICON_INDI_ERROR_FILE,
-            ('hic-dialog-warning', 'gtk-dialog-warning', 'dialog-warning')  : self.ICON_INDI_ALERT_FILE,
-            ('hic-task-refresh', 'gtk-execute', 'execute')                  : self.ICON_INDI_REFRESH_FILE,
-        }
-        valid_stock_id = stock_name
-        if stock_name:
-            for names, path in HOB_CHECK_STOCK_NAME.iteritems():
-                if stock_name in names:
-                    valid_stock_id = names[0]
-                    if not gtk.icon_factory_lookup_default(valid_stock_id):
-                        self.set_hob_icon_to_stock_icon(path, valid_stock_id)
-
-        return valid_stock_id
-
-class HobCellRendererController(gobject.GObject):
-    (MODE_CYCLE_RUNNING, MODE_ONE_SHORT) = range(2)
-    __gsignals__ = {
-        "run-timer-stopped" : (gobject.SIGNAL_RUN_LAST,
-                                gobject.TYPE_NONE,
-                                ()),
-    }
-    def __init__(self, runningmode=MODE_CYCLE_RUNNING, is_draw_row=False):
-        gobject.GObject.__init__(self)
-        self.timeout_id = None
-        self.current_angle_pos = 0.0
-        self.step_angle = 0.0
-        self.tree_headers_height = 0
-        self.running_cell_areas = []
-        self.running_mode = runningmode
-        self.is_queue_draw_row_area = is_draw_row
-        self.force_stop_enable = False
-
-    def is_active(self):
-        if self.timeout_id:
-            return True
-        else:
-            return False
-
-    def reset_run(self):
-        self.force_stop()
-        self.running_cell_areas = []
-        self.current_angle_pos = 0.0
-        self.step_angle = 0.0
-
-    ''' time_iterval: (1~1000)ms, which will be as the basic interval count for timer
-        init_usrdata: the current data which related the progress-bar will be at
-        min_usrdata: the range of min of user data
-        max_usrdata: the range of max of user data
-        step: each step which you want to progress
-        Note: the init_usrdata should in the range of from min to max, and max should > min
-             step should < (max - min)
-    '''
-    def start_run(self, time_iterval, init_usrdata, min_usrdata, max_usrdata, step, tree):
-        if (not time_iterval) or (not max_usrdata):
-            return
-        usr_range = (max_usrdata - min_usrdata) * 1.0
-        self.current_angle_pos = (init_usrdata * 1.0) / usr_range
-        self.step_angle = (step * 1) / usr_range
-        self.timeout_id = gobject.timeout_add(int(time_iterval),
-        self.make_image_on_progressing_cb, tree)
-        self.tree_headers_height = self.get_treeview_headers_height(tree)
-        self.force_stop_enable = False
-
-    def force_stop(self):
-        self.emit("run-timer-stopped")
-        self.force_stop_enable = True
-        if self.timeout_id:
-            if gobject.source_remove(self.timeout_id):
-                self.timeout_id = None
-
-    def on_draw_pixbuf_cb(self, pixbuf, cr, x, y, img_width, img_height, do_refresh=True):
-        if pixbuf:
-            r = max(img_width/2, img_height/2)
-            cr.translate(x + r, y + r)
-            if do_refresh:
-                cr.rotate(2 * math.pi * self.current_angle_pos)
-
-            cr.set_source_pixbuf(pixbuf, -img_width/2, -img_height/2)
-            cr.paint()
-
-    def on_draw_fadeinout_cb(self, cr, color, x, y, width, height, do_fadeout=True):
-        if do_fadeout:
-            alpha = self.current_angle_pos * 0.8
-        else:
-            alpha = (1.0 - self.current_angle_pos) * 0.8
-
-        cr.set_source_rgba(color.red, color.green, color.blue, alpha)
-        cr.rectangle(x, y, width, height)
-        cr.fill()
-
-    def get_treeview_headers_height(self, tree):
-        if tree and (tree.get_property("headers-visible") == True):
-            height = tree.get_allocation().height - tree.get_bin_window().get_size()[1]
-            return height
-
-        return 0
-
-    def make_image_on_progressing_cb(self, tree):
-        self.current_angle_pos += self.step_angle
-        if self.running_mode == self.MODE_CYCLE_RUNNING:
-            if (self.current_angle_pos >= 1):
-                self.current_angle_pos = self.step_angle
-        else:
-            if self.current_angle_pos > 1:
-                self.force_stop()
-                return False
-
-        if self.is_queue_draw_row_area:
-            for path in self.running_cell_areas:
-                rect = tree.get_cell_area(path, tree.get_column(0))
-                row_x, _, row_width, _ = tree.get_visible_rect()
-                tree.queue_draw_area(row_x, rect.y + self.tree_headers_height, row_width, rect.height)
-        else:
-            for rect in self.running_cell_areas:
-                tree.queue_draw_area(rect.x, rect.y + self.tree_headers_height, rect.width, rect.height)
-
-        return (not self.force_stop_enable)
-
-    def append_running_cell_area(self, cell_area):
-        if cell_area and (cell_area not in self.running_cell_areas):
-            self.running_cell_areas.append(cell_area)
-
-    def remove_running_cell_area(self, cell_area):
-        if cell_area in self.running_cell_areas:
-            self.running_cell_areas.remove(cell_area)
-        if not self.running_cell_areas:
-            self.reset_run()
-
-gobject.type_register(HobCellRendererController)
-
-class HobCellRendererPixbuf(gtk.CellRendererPixbuf):
-    def __init__(self):
-        gtk.CellRendererPixbuf.__init__(self)
-        self.control = HobCellRendererController()
-        # add icon checker for make the gtk-icon transfer to hob-icon
-        self.checker = HobIconChecker()
-        self.set_property("stock-size", gtk.ICON_SIZE_DND)
-
-    def get_pixbuf_from_stock_icon(self, widget, stock_id="", size=gtk.ICON_SIZE_DIALOG):
-        if widget and stock_id and gtk.icon_factory_lookup_default(stock_id):
-            return widget.render_icon(stock_id, size)
-
-        return None
-
-    def set_icon_name_to_id(self, new_name):
-        if new_name and type(new_name) == str:
-            # check the name is need to transfer to hob icon or not
-            name = self.checker.check_stock_icon(new_name)
-            if name.startswith("hic") or name.startswith("gtk"):
-                stock_id = name
-            else:
-                stock_id = 'gtk-' + name
-
-        return stock_id
-
-    ''' render cell exactly, "icon-name" is priority
-        if use the 'hic-task-refresh' will make the pix animation
-        if 'pix' will change the pixbuf for it from the pixbuf or image.
-    '''
-    def do_render(self, window, tree, background_area,cell_area, expose_area, flags):
-        if (not self.control) or (not tree):
-            return
-
-        x, y, w, h = self.on_get_size(tree, cell_area)
-        x += cell_area.x
-        y += cell_area.y
-        w -= 2 * self.get_property("xpad")
-        h -= 2 * self.get_property("ypad")
-
-        stock_id = ""
-        if self.props.icon_name:
-            stock_id = self.set_icon_name_to_id(self.props.icon_name)
-        elif self.props.stock_id:
-            stock_id = self.props.stock_id
-        elif self.props.pixbuf:
-            pix = self.props.pixbuf
-        else:
-            return
-
-        if stock_id:
-            pix = self.get_pixbuf_from_stock_icon(tree, stock_id, self.props.stock_size)
-        if stock_id == 'hic-task-refresh':
-            self.control.append_running_cell_area(cell_area)
-            if self.control.is_active():
-                self.control.on_draw_pixbuf_cb(pix, window.cairo_create(), x, y, w, h, True)
-            else:
-                self.control.start_run(200, 0, 0, 1000, 150, tree)
-        else:
-            self.control.remove_running_cell_area(cell_area)
-            self.control.on_draw_pixbuf_cb(pix, window.cairo_create(), x, y, w, h, False)
-
-    def on_get_size(self, widget, cell_area):
-        if self.props.icon_name or self.props.pixbuf or self.props.stock_id:
-            w, h = gtk.icon_size_lookup(self.props.stock_size)
-            calc_width = self.get_property("xpad") * 2 + w
-            calc_height = self.get_property("ypad") * 2 + h
-            x_offset = 0
-            y_offset = 0
-            if cell_area and w > 0 and h > 0:
-                x_offset = self.get_property("xalign") * (cell_area.width - calc_width - self.get_property("xpad"))
-                y_offset = self.get_property("yalign") * (cell_area.height - calc_height - self.get_property("ypad"))
-
-            return x_offset, y_offset, w, h
-
-        return 0, 0, 0, 0
-
-gobject.type_register(HobCellRendererPixbuf)
-
-class HobCellRendererToggle(gtk.CellRendererToggle):
-    def __init__(self):
-        gtk.CellRendererToggle.__init__(self)
-        self.ctrl = HobCellRendererController(is_draw_row=True)
-        self.ctrl.running_mode = self.ctrl.MODE_ONE_SHORT
-        self.cell_attr = {"fadeout": False, "number_of_children": 0}
-
-    def do_render(self, window, widget, background_area, cell_area, expose_area, flags):
-        if (not self.ctrl) or (not widget):
-            return
-
-        if flags & gtk.CELL_RENDERER_SELECTED:
-            state = gtk.STATE_SELECTED
-        else:
-            state = gtk.STATE_NORMAL
-
-        if self.ctrl.is_active():
-            path = widget.get_path_at_pos(cell_area.x + cell_area.width/2, cell_area.y + cell_area.height/2)
-            # sometimes the parameters of cell_area will be a negative number,such as pull up down the scroll bar
-            # it's over the tree container range, so the path will be bad
-            if not path: return
-            path = path[0]
-            if path in self.ctrl.running_cell_areas:
-                cr = window.cairo_create()
-                color = widget.get_style().base[state]
-
-                row_x, _, row_width, _ = widget.get_visible_rect()
-                border_y = self.get_property("ypad")
-                self.ctrl.on_draw_fadeinout_cb(cr, color, row_x, cell_area.y - border_y, row_width, \
-                                               cell_area.height + border_y * 2, self.cell_attr["fadeout"])
-        # draw number of a group
-        if self.cell_attr["number_of_children"]:
-            text = "%d pkg" % self.cell_attr["number_of_children"]
-            pangolayout = widget.create_pango_layout(text)
-            textw, texth = pangolayout.get_pixel_size()
-            x = cell_area.x + (cell_area.width/2) - (textw/2)
-            y = cell_area.y + (cell_area.height/2) - (texth/2)
-
-            widget.style.paint_layout(window, state, True, cell_area, widget, "checkbox", x, y, pangolayout)
-        else:
-            return gtk.CellRendererToggle.do_render(self, window, widget, background_area, cell_area, expose_area, flags)
-
-    '''delay: normally delay time is 1000ms
-       cell_list: whilch cells need to be render
-    '''
-    def fadeout(self, tree, delay, cell_list=None):
-        if (delay < 200) or (not tree):
-            return
-        self.cell_attr["fadeout"] = True
-        self.ctrl.running_cell_areas = cell_list
-        self.ctrl.start_run(200, 0, 0, delay, (delay * 200 / 1000), tree)
-
-    def connect_render_state_changed(self, func, usrdata=None):
-        if not func:
-            return
-        if usrdata:
-            self.ctrl.connect("run-timer-stopped", func, self, usrdata)
-        else:
-            self.ctrl.connect("run-timer-stopped", func, self)
-
-gobject.type_register(HobCellRendererToggle)