ref-manual: Corrected the "package_rpm.bbclass" section.

A cut-and-paste error had left a "package_deb" string in the
first sentence of the section.  Replaced with "package_rpm."

Reported-by: Geoffroy VanCutsem <geoffroy.vancutsem@intel.com>
(From yocto-docs rev: 8eb1ef532754def5d1d15b98b3b45f259af0edc0)

Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake/bin/bitbake-worker

@@ -97,7 +97,8 @@ def fork_off_task(cfg, data, workerdata, fn, task, taskname, appends, quieterror
         except TypeError:
              umask = taskdep['umask'][taskname]
 
-    if 'fakeroot' in taskdep and taskname in taskdep['fakeroot']:
+    # We can't use the fakeroot environment in a dry run as it possibly hasn't been built
+    if 'fakeroot' in taskdep and taskname in taskdep['fakeroot'] and not cfg.dry_run:
         envvars = (workerdata["fakerootenv"][fn] or "").split()
         for key, value in (var.split('=') for var in envvars):
             envbackup[key] = os.environ.get(key)

bitbake/lib/bb/build.py

@@ -285,7 +285,7 @@ set -e
         if bb.msg.loggerVerboseLogs:
             script.write("set -x\n")
         if cwd:
-            script.write("cd %s\n" % cwd)
+            script.write("cd '%s'\n" % cwd)
         script.write("%s\n" % func)
         script.write('''
 # cleanup

bitbake/lib/bb/command.py

@@ -86,6 +86,8 @@ class Command:
 
     def runAsyncCommand(self):
         try:
+            if self.cooker.state == bb.cooker.state.error:
+                return False
             if self.currentAsyncCommand is not None:
                 (command, options) = self.currentAsyncCommand
                 commandmethod = getattr(CommandsAsync, command)

bitbake/lib/bb/cooker.py

@@ -61,7 +61,7 @@ class CollectionError(bb.BBHandledException):
     """
 
 class state:
-    initial, parsing, running, shutdown, forceshutdown, stopped = range(6)
+    initial, parsing, running, shutdown, forceshutdown, stopped, error = range(7)
 
 
 class SkippedPackage:
@@ -1321,6 +1321,7 @@ class BBCooker:
             self.prhost = prserv.serv.auto_start(self.data)
         except prserv.serv.PRServiceConfigError:
             bb.event.fire(CookerExit(), self.event_data)
+            self.state = state.error
         return
 
     def post_serve(self):

bitbake/lib/bb/data.py

@@ -214,7 +214,7 @@ def emit_var(var, o=sys.__stdout__, d = init(), all=False):
         o.write('unset %s\n' % varExpanded)
         return 0
 
-    if not val:
+    if val is None:
         return 0
 
     val = str(val)
@@ -229,7 +229,7 @@ def emit_var(var, o=sys.__stdout__, d = init(), all=False):
 
     # if we're going to output this within doublequotes,
     # to a shell, we need to escape the quotes in the var
-    alter = re.sub('"', '\\"', val.strip())
+    alter = re.sub('"', '\\"', val)
     alter = re.sub('\n', ' \\\n', alter)
     o.write('%s="%s"\n' % (varExpanded, alter))
     return 0

bitbake/lib/bb/fetch2/__init__.py

@@ -329,7 +329,7 @@ def decodeurl(url):
     user, password, parameters).
     """
 
-    m = re.compile('(?P<type>[^:]*)://((?P<user>.+)@)?(?P<location>[^;]+)(;(?P<parm>.*))?').match(url)
+    m = re.compile('(?P<type>[^:]*)://((?P<user>[^/]+)@)?(?P<location>[^;]+)(;(?P<parm>.*))?').match(url)
     if not m:
         raise MalformedUrl(url)
 
@@ -805,7 +805,11 @@ def try_mirror_url(newuri, origud, ud, ld, check = False):
             dest = os.path.join(dldir, os.path.basename(ud.localpath))
             if not os.path.exists(dest):
                 os.symlink(ud.localpath, dest)
-            return None
+            if not os.path.exists(origud.donestamp) or origud.method.need_update(origud.url, origud, ld):
+                origud.method.download(origud.url, origud, ld)
+                if hasattr(origud.method,"build_mirror_data"):
+                    origud.method.build_mirror_data(origud.url, origud, ld)
+            return ud.localpath
         # Otherwise the result is a local file:// and we symlink to it
         if not os.path.exists(origud.localpath):
             if os.path.islink(origud.localpath):

bitbake/lib/bb/fetch2/git.py

@@ -305,8 +305,8 @@ class Git(FetchMethod):
             username = ""
 
         basecmd = data.getVar("FETCHCMD_git", d, True) or "git"
-        cmd = "%s ls-remote %s://%s%s%s %s" % \
-              (basecmd, ud.proto, username, ud.host, ud.path, ud.branches[name])
+        cmd = "%s ls-remote %s://%s%s%s refs/heads/%s refs/tags/%s" % \
+              (basecmd, ud.proto, username, ud.host, ud.path, ud.branches[name], ud.branches[name])
         if ud.proto.lower() != 'file':
             bb.fetch2.check_network_access(d, cmd)
         output = runfetchcmd(cmd, d, True)

bitbake/lib/bb/fetch2/hg.py

@@ -92,7 +92,10 @@ class Hg(FetchMethod):
         if not ud.user:
             hgroot = host + ud.path
         else:
-            hgroot = ud.user + "@" + host + ud.path
+            if ud.pswd:
+                hgroot = ud.user + ":" + ud.pswd + "@" + host + ud.path
+            else:
+                hgroot = ud.user + "@" + host + ud.path
 
         if command == "info":
             return "%s identify -i %s://%s/%s" % (basecmd, proto, hgroot, ud.module)
@@ -112,7 +115,10 @@ class Hg(FetchMethod):
             # do not pass options list; limiting pull to rev causes the local
             # repo not to contain it and immediately following "update" command
             # will crash
-            cmd = "%s pull" % (basecmd)
+            if ud.user and ud.pswd:
+                cmd = "%s --config auth.default.prefix=* --config auth.default.username=%s --config auth.default.password=%s --config \"auth.default.schemes=%s\" pull" % (basecmd, ud.user, ud.pswd, proto)
+            else:
+                cmd = "%s pull" % (basecmd)
         elif command == "update":
             cmd = "%s update -C %s" % (basecmd, " ".join(options))
         else:

bitbake/lib/bb/fetch2/perforce.py

@@ -112,7 +112,7 @@ class Perforce(FetchMethod):
         base = path
         which = path.find('/...')
         if which != -1:
-            base = path[:which]
+            base = path[:which-1]
 
         base = self._strip_leading_slashes(base)
 

bitbake/lib/bb/fetch2/svn.py

@@ -27,6 +27,7 @@ import os
 import sys
 import logging
 import bb
+import re
 from   bb import data
 from   bb.fetch2 import FetchMethod
 from   bb.fetch2 import FetchError
@@ -91,6 +92,8 @@ class Svn(FetchMethod):
 
         if command == "info":
             svncmd = "%s info %s %s://%s/%s/" % (ud.basecmd, " ".join(options), proto, svnroot, ud.module)
+        elif command == "log1":
+            svncmd = "%s log --limit 1 %s %s://%s/%s/" % (ud.basecmd, " ".join(options), proto, svnroot, ud.module)
         else:
             suffix = ""
             if ud.revision:
@@ -167,14 +170,13 @@ class Svn(FetchMethod):
         """
         Return the latest upstream revision number
         """
-        bb.fetch2.check_network_access(d, self._buildsvncommand(ud, d, "info"))
+        bb.fetch2.check_network_access(d, self._buildsvncommand(ud, d, "log1"))
 
-        output = runfetchcmd("LANG=C LC_ALL=C " + self._buildsvncommand(ud, d, "info"), d, True)
+        output = runfetchcmd("LANG=C LC_ALL=C " + self._buildsvncommand(ud, d, "log1"), d, True)
 
-        revision = None
-        for line in output.splitlines():
-            if "Last Changed Rev" in line:
-                revision = line.split(":")[1].strip()
+        # skip the first line, as per output of svn log
+        # then we expect the revision on the 2nd line
+        revision = re.search('^r([0-9]*)', output.splitlines()[1]).group(1)
 
         return revision
 

bitbake/lib/bb/monitordisk.py

@@ -243,7 +243,7 @@ class diskMonitor:
                     # zero, this is a feature of the fs, we disable the inode
                     # checking for such a fs.
                     if st.f_files == 0:
-                        logger.warn("Inode check for %s is unavaliable, will remove it from disk monitor" % path)
+                        logger.info("Inode check for %s is unavaliable, will remove it from disk monitor" % path)
                         self.devDict[k][2] = None
                         continue
                     # Always show warning, the self.checked would always be False if the action is WARN

bitbake/lib/bb/parse/__init__.py

@@ -73,9 +73,17 @@ def update_mtime(f):
 def mark_dependency(d, f):
     if f.startswith('./'):
         f = "%s/%s" % (os.getcwd(), f[2:])
-    deps = (d.getVar('__depends') or []) + [(f, cached_mtime(f))]
-    d.setVar('__depends', deps)
+    deps = (d.getVar('__depends') or [])
+    s = (f, cached_mtime_noerror(f))
+    if s not in deps:
+        deps.append(s)
+        d.setVar('__depends', deps)
 
+def check_dependency(d, f):
+    s = (f, cached_mtime_noerror(f))
+    deps = (d.getVar('__depends') or [])
+    return s in deps
+   
 def supports(fn, data):
     """Returns true if we have a handler for this file, false otherwise"""
     for h in handlers:
@@ -102,11 +110,14 @@ def init_parser(d):
 def resolve_file(fn, d):
     if not os.path.isabs(fn):
         bbpath = d.getVar("BBPATH", True)
-        newfn = bb.utils.which(bbpath, fn)
+        newfn, attempts = bb.utils.which(bbpath, fn, history=True)
+        for af in attempts:
+            mark_dependency(d, af)
         if not newfn:
             raise IOError("file %s not found in %s" % (fn, bbpath))
         fn = newfn
 
+    mark_dependency(d, fn)
     if not os.path.isfile(fn):
         raise IOError("file %s not found" % fn)
 

bitbake/lib/bb/parse/parse_py/BBHandler.py

@@ -77,7 +77,10 @@ def inherit(files, fn, lineno, d):
         if not os.path.isabs(file):
             dname = os.path.dirname(fn)
             bbpath = "%s:%s" % (dname, d.getVar("BBPATH", True))
-            abs_fn = bb.utils.which(bbpath, file)
+            abs_fn, attempts = bb.utils.which(bbpath, file, history=True)
+            for af in attempts:
+                if af != abs_fn:
+                    bb.parse.mark_dependency(d, af)
             if abs_fn:
                 file = abs_fn
 

bitbake/lib/bb/parse/parse_py/ConfHandler.py

@@ -82,9 +82,15 @@ def include(oldfn, fn, lineno, data, error_out):
     if not os.path.isabs(fn):
         dname = os.path.dirname(oldfn)
         bbpath = "%s:%s" % (dname, data.getVar("BBPATH", True))
-        abs_fn = bb.utils.which(bbpath, fn)
+        abs_fn, attempts = bb.utils.which(bbpath, fn, history=True)
+        if abs_fn and bb.parse.check_dependency(data, abs_fn):
+            bb.warn("Duplicate inclusion for %s in %s" % (abs_fn, data.getVar('FILE', True)))
+        for af in attempts:
+            bb.parse.mark_dependency(data, af)
         if abs_fn:
             fn = abs_fn
+    elif bb.parse.check_dependency(data, fn):
+        bb.warn("Duplicate inclusion for %s in %s" % (fn, data.getVar('FILE', True)))
 
     from bb.parse import handle
     try:
@@ -93,6 +99,7 @@ def include(oldfn, fn, lineno, data, error_out):
         if error_out:
             raise ParseError("Could not %(error_out)s file %(fn)s" % vars(), oldfn, lineno)
         logger.debug(2, "CONF file '%s' not found", fn)
+        bb.parse.mark_dependency(data, fn)
 
 # We have an issue where a UI might want to enforce particular settings such as
 # an empty DISTRO variable. If configuration files do something like assigning

bitbake/lib/bb/runqueue.py

@@ -1204,6 +1204,8 @@ class RunQueueExecuteTasks(RunQueueExecute):
 
         self.stampcache = {}
 
+        initial_covered = self.rq.scenequeue_covered.copy()
+
         # Mark initial buildable tasks
         for task in xrange(self.stats.total):
             self.runq_running.append(0)
@@ -1257,13 +1259,28 @@ class RunQueueExecuteTasks(RunQueueExecute):
             except TypeError:
                 covered_remove = bb.utils.better_eval(call2, locs)
 
-        for task in covered_remove:
+        def removecoveredtask(task):
             fn = self.rqdata.taskData.fn_index[self.rqdata.runq_fnid[task]]
             taskname = self.rqdata.runq_task[task] + '_setscene'
             bb.build.del_stamp(taskname, self.rqdata.dataCache, fn)
-            logger.debug(1, 'Not skipping task %s due to setsceneverify', task)
             self.rq.scenequeue_covered.remove(task)
 
+        toremove = covered_remove
+        for task in toremove:
+            logger.debug(1, 'Not skipping task %s due to setsceneverify', task)
+        while toremove:
+            covered_remove = []
+            for task in toremove:
+                removecoveredtask(task)
+                for deptask in self.rqdata.runq_depends[task]:
+                    if deptask not in self.rq.scenequeue_covered:
+                        continue
+                    if deptask in toremove or deptask in covered_remove or deptask in initial_covered:
+                        continue
+                    logger.debug(1, 'Task %s depends on task %s so not skipping' % (task, deptask))
+                    covered_remove.append(deptask)
+            toremove = covered_remove
+
         logger.debug(1, 'Full skip list %s', self.rq.scenequeue_covered)
 
         event.fire(bb.event.StampUpdate(self.rqdata.target_pairs, self.rqdata.dataCache.stamp), self.cfgData)
@@ -1391,7 +1408,7 @@ class RunQueueExecuteTasks(RunQueueExecute):
                 bb.event.fire(startevent, self.cfgData)
 
             taskdep = self.rqdata.dataCache.task_deps[fn]
-            if 'fakeroot' in taskdep and taskname in taskdep['fakeroot']:
+            if 'fakeroot' in taskdep and taskname in taskdep['fakeroot'] and not self.cooker.configuration.dry_run:
                 if not self.rq.fakeworker:
                     self.rq.start_fakeworker(self)
                 self.rq.fakeworker.stdin.write("<runtask>" + pickle.dumps((fn, task, taskname, False, self.cooker.collection.get_file_appends(fn))) + "</runtask>")

bitbake/lib/bb/tests/fetch.py

@@ -407,7 +407,8 @@ class URLHandle(unittest.TestCase):
     datatable = {
        "http://www.google.com/index.html" : ('http', 'www.google.com', '/index.html', '', '', {}),
        "cvs://anoncvs@cvs.handhelds.org/cvs;module=familiar/dist/ipkg" : ('cvs', 'cvs.handhelds.org', '/cvs', 'anoncvs', '', {'module': 'familiar/dist/ipkg'}),
-       "cvs://anoncvs:anonymous@cvs.handhelds.org/cvs;tag=V0-99-81;module=familiar/dist/ipkg" : ('cvs', 'cvs.handhelds.org', '/cvs', 'anoncvs', 'anonymous', {'tag': 'V0-99-81', 'module': 'familiar/dist/ipkg'})
+       "cvs://anoncvs:anonymous@cvs.handhelds.org/cvs;tag=V0-99-81;module=familiar/dist/ipkg" : ('cvs', 'cvs.handhelds.org', '/cvs', 'anoncvs', 'anonymous', {'tag': 'V0-99-81', 'module': 'familiar/dist/ipkg'}),
+       "git://git.openembedded.org/bitbake;branch=@foo" : ('git', 'git.openembedded.org', '/bitbake', '', '', {'branch': '@foo'})
     }
 
     def test_decodeurl(self):

bitbake/lib/bb/ui/crumbs/hoblistmodel.py

@@ -199,7 +199,9 @@ class PackageListModel(gtk.ListStore):
         return self.cmp_vals(val1, val2, user_data)
 
     def cmp_vals(self, val1, val2, user_data):
-        if val1.startswith(user_data) and not val2.startswith(user_data):
+        if val1 is None or val2 is None:
+            return 0
+        elif val1.startswith(user_data) and not val2.startswith(user_data):
             return -1
         elif not val1.startswith(user_data) and val2.startswith(user_data):
             return 1
@@ -575,7 +577,9 @@ class RecipeListModel(gtk.ListStore):
         return self.cmp_vals(val1, val2, user_data)
 
     def cmp_vals(self, val1, val2, user_data):
-        if val1.startswith(user_data) and not val2.startswith(user_data):
+        if val1 is None or val2 is None:
+            return 0
+        elif val1.startswith(user_data) and not val2.startswith(user_data):
             return -1
         elif not val1.startswith(user_data) and val2.startswith(user_data):
             return 1

bitbake/lib/bb/ui/crumbs/imagedetailspage.py

@@ -355,9 +355,9 @@ class ImageDetailsPage (HobPage):
             vallist.append(base_image)
             i = 0
             for layer in layers:
-                varlist.append(" - ")
                 if i > layer_num_limit:
                     break
+                varlist.append(" - ")
                 i += 1
             vallist.append("")
             i = 0

bitbake/lib/bb/utils.py

@@ -793,22 +793,28 @@ def copyfile(src, dest, newmtime = None, sstat = None):
         newmtime = sstat[stat.ST_MTIME]
     return newmtime
 
-def which(path, item, direction = 0):
+def which(path, item, direction = 0, history = False):
     """
     Locate a file in a PATH
     """
 
+    hist = []
     paths = (path or "").split(':')
     if direction != 0:
         paths.reverse()
 
     for p in paths:
         next = os.path.join(p, item)
+        hist.append(next)
         if os.path.exists(next):
             if not os.path.isabs(next):
                 next = os.path.abspath(next)
+            if history:
+                return next, hist
             return next
 
+    if history:
+        return "", hist
     return ""
 
 def to_boolean(string, default=None):

documentation/adt-manual/adt-command.xml

@@ -8,23 +8,32 @@
     <para>
         Recall that earlier the manual discussed how to use an existing toolchain
         tarball that had been installed into the default installation
-        directory, <filename>/opt/poky</filename>, which is outside of the
+        directory, <filename>/opt/poky/&DISTRO;</filename>, which is outside of the
         <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
         (see the section "<link linkend='using-an-existing-toolchain-tarball'>Using a Cross-Toolchain Tarball)</link>".
         And, that sourcing your architecture-specific environment setup script
         initializes a suitable cross-toolchain development environment.
-        During the setup, locations for the compiler, QEMU scripts, QEMU binary,
+    </para>
+
+    <para>
+        During this setup, locations for the compiler, QEMU scripts, QEMU binary,
         a special version of <filename>pkgconfig</filename> and other useful
         utilities are added to the <filename>PATH</filename> variable.
-        Variables to assist <filename>pkgconfig</filename> and <filename>autotools</filename>
-        are also defined so that,
-        for example, <filename>configure.sh</filename> can find pre-generated
-        test results for tests that need target hardware on which to run.
-        These conditions allow you to easily use the toolchain outside of the
-        OpenEmbedded build environment on both autotools-based projects and
-        Makefile-based projects.
+        Also, variables to assist
+        <filename>pkgconfig</filename> and <filename>autotools</filename>
+        are also defined so that, for example, <filename>configure.sh</filename>
+        can find pre-generated test results for tests that need target hardware
+        on which to run.
     </para>
 
+    <para>
+        Collectively, these conditions allow you to easily use the toolchain
+        outside of the OpenEmbedded build environment on both autotools-based
+        projects and Makefile-based projects.
+        This chapter provides information for both these types of projects.
+    </para>
+
+
 <section id='autotools-based-projects'>
 <title>Autotools-Based Projects</title>
 
@@ -179,7 +188,7 @@
                 If <filename>configure</filename> script results in problems recognizing the
                 <filename>--with-libtool-sysroot=&lt;sysroot-dir&gt;</filename> option,
                 regenerate the script to enable the support by doing the following and then
-                re-running the script:
+                run the script again:
                 <literallayout class='monospaced'>
      $ libtoolize --automake
      $ aclocal -I ${OECORE_NATIVE_SYSROOT}/usr/share/aclocal \

documentation/adt-manual/adt-intro.xml

@@ -22,8 +22,8 @@
     and an introduction to the <trademark class='trade'>Eclipse</trademark> IDE
     Yocto Plug-in.
     <note>
-        The ADT is distribution-neutral and does not require the Yocto 
-        Project reference distribution, which is called Poky.  
+        The ADT is distribution-neutral and does not require the Yocto
+        Project reference distribution, which is called Poky.
         This manual, however, uses examples that use the Poky distribution.
     </note>
 </para>
@@ -43,7 +43,7 @@
         <itemizedlist>
             <listitem><para>An architecture-specific cross-toolchain and matching
                 sysroot both built by the OpenEmbedded build system.
-                The toolchain and sysroot are based on a 
+                The toolchain and sysroot are based on a
                 <ulink url='&YOCTO_DOCS_DEV_URL;#metadata'>Metadata</ulink>
                 configuration and extensions,
                 which allows you to cross-develop on the host machine for the target hardware.
@@ -149,8 +149,7 @@
                     that causes skips in audio,
                     stutters in your desktop experience, or situations that overload your server
                     even when you have plenty of CPU power left.
-                    You can find out more about LatencyTOP at
-                    <ulink url='https://latencytop.org/'></ulink>.</para></listitem>
+                    </para></listitem>
                 <listitem><para><emphasis>PowerTOP:</emphasis> Helps you determine what
                     software is using the most power.
                     You can find out more about PowerTOP at

documentation/adt-manual/adt-manual.xml

@@ -66,6 +66,26 @@
                 <date>October 2013</date>
                 <revremark>Released with the Yocto Project 1.5 Release.</revremark>
             </revision>
+            <revision>
+                <revnumber>1.5.1</revnumber>
+                <date>January 2014</date>
+                <revremark>Released with the Yocto Project 1.5.1 Release.</revremark>
+            </revision>
+            <revision>
+                <revnumber>1.5.2</revnumber>
+                <date>May 2014</date>
+                <revremark>Released with the Yocto Project 1.5.2 Release.</revremark>
+            </revision>
+            <revision>
+                <revnumber>1.5.3</revnumber>
+                <date>July 2014</date>
+                <revremark>Released with the Yocto Project 1.5.3 Release.</revremark>
+            </revision>
+            <revision>
+                <revnumber>1.5.4</revnumber>
+                <date>December 2014</date>
+                <revremark>Released with the Yocto Project 1.5.4 Release.</revremark>
+            </revision>
        </revhistory>
 
     <copyright>
@@ -79,11 +99,10 @@
         the terms of the <ulink type="http" url="http://creativecommons.org/licenses/by-sa/2.0/uk/">Creative Commons Attribution-Share Alike 2.0 UK: England &amp; Wales</ulink> as published by Creative Commons.
       </para>
       <note>
-          Due to production processes, there could be differences between the Yocto Project
-          documentation bundled in the release tarball and the
-          <ulink url='&YOCTO_DOCS_ADT_URL;'>Yocto Project Application Developer's Guide</ulink> on
-          the <ulink url='&YOCTO_HOME_URL;'>Yocto Project</ulink> website.
-          For the latest version of this manual, see the manual on the website.
+          For the latest version of this manual associated with this
+          Yocto Project release, see the
+          <ulink url='&YOCTO_DOCS_ADT_URL;'>Yocto Project Application Developer's Guide</ulink>
+          from the Yocto Project website.
       </note>
 
     </legalnotice>

documentation/adt-manual/adt-prepare.xml

@@ -80,39 +80,48 @@
 
             <para>
                 The ADT Installer is contained in the ADT Installer tarball.
-                You can download the tarball into any directory from the
-                <ulink url='&YOCTO_DL_URL;/releases'>Index of Releases</ulink>, specifically
-                at
-                <ulink url='&YOCTO_ADTINSTALLER_DL_URL;'></ulink>.
-                Or, you can use BitBake to generate the tarball inside the existing
-                <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>.
-            </para>
-
-            <para>
-                If you use BitBake to generate the ADT Installer tarball, you must
-                <filename>source</filename> the environment setup script
-                (<ulink url='&YOCTO_DOCS_REF_URL;#structure-core-script'><filename>&OE_INIT_FILE;</filename></ulink>
-                or
-                <ulink url='&YOCTO_DOCS_REF_URL;#structure-memres-core-script'><filename>oe-init-build-env-memres</filename></ulink>)
-                located in the Source Directory before running the
-                BitBake command that creates the tarball.
-            </para>
-
-            <para>
-                The following example commands download the Poky tarball, set up the
-                <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink>,
-                set up the environment while also creating the default Build Directory,
-                and run the BitBake command that results in the tarball
-                <filename>~/yocto-project/build/tmp/deploy/sdk/adt_installer.tar.bz2</filename>:
-                <literallayout class='monospaced'>
+                You can get the tarball using either of these methods:
+                <itemizedlist>
+                    <listitem><para><emphasis>Download the Tarball:</emphasis>
+                        You can download the tarball from
+                        <ulink url='&YOCTO_ADTINSTALLER_DL_URL;'></ulink> into
+                        any directory.</para></listitem>
+                    <listitem><para><emphasis>Build the Tarball:</emphasis>
+                        You can use BitBake to generate the tarball inside an
+                        existing
+                        <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>.
+                        </para>
+                        <para>If you use BitBake to generate the ADT Installer
+                        tarball, you must <filename>source</filename> the
+                        environment setup script
+                        (<ulink url='&YOCTO_DOCS_REF_URL;#structure-core-script'><filename>&OE_INIT_FILE;</filename></ulink>
+                        or
+                        <ulink url='&YOCTO_DOCS_REF_URL;#structure-memres-core-script'><filename>oe-init-build-env-memres</filename></ulink>)
+                        located in the Source Directory before running the
+                        BitBake command that creates the tarball.</para>
+                        <para>The following example commands establish
+                        the
+                        <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink>,
+                        check out the current release branch, set up the
+                        build environment while also creating the default
+                        Build Directory, and run the BitBake command that
+                        results in the tarball
+                        <filename>poky/build/tmp/deploy/sdk/adt_installer.tar.bz2</filename>:
+                        <note>
+                            Before using BitBake to build the ADT tarball, be
+                            sure to make sure your
+                            <filename>local.conf</filename> file is properly
+                            configured.
+                        </note>
+                        <literallayout class='monospaced'>
      $ cd ~
-     $ mkdir yocto-project
-     $ cd yocto-project
-     $ wget &YOCTO_RELEASE_DL_URL;/&YOCTO_POKY_TARBALL;
-     $ tar xjf &YOCTO_POKY_TARBALL;
-     $ source &OE_INIT_PATH;
+     $ git clone git://git.yoctoproject.org/poky
+     $ cd poky
+     $ git checkout -b &DISTRO_NAME; origin/&DISTRO_NAME;
+     $ source &OE_INIT_FILE;
      $ bitbake adt-installer
-                </literallayout>
+                        </literallayout></para></listitem>
+                </itemizedlist>
             </para>
         </section>
 
@@ -127,7 +136,7 @@
                 a top-level directory named <filename>adt-installer</filename>:
                 <literallayout class='monospaced'>
      $ cd ~
-     $ cp ~/poky/build/tmp/deploy/sdk/adt_installer.tar.bz2 $HOME
+     $ cp poky/build/tmp/deploy/sdk/adt_installer.tar.bz2 $HOME
      $ tar -xjf adt_installer.tar.bz2
                 </literallayout>
                 Unpacking it creates the directory <filename>adt-installer</filename>,
@@ -192,12 +201,9 @@
 
             <para>
                 After you have configured the <filename>adt_installer.conf</filename> file,
-                run the installer using the following command.
-                Be sure that you are not trying to use cross-compilation tools.
-                When you run the installer, the environment must use a
-                host <filename>gcc</filename>:
+                run the installer using the following command:
                 <literallayout class='monospaced'>
-     $ cd ~/adt-installer
+     $ cd adt-installer
      $ ./adt_installer
                 </literallayout>
                 Once the installer begins to run, you are asked to enter the
@@ -268,7 +274,7 @@
                             target, go into the <filename>x86_64</filename>
                             folder and download the following installer:
                             <literallayout class='monospaced'>
-     poky-eglibc-x86_64-core-image-sato-i586-&DISTRO;.sh
+     poky-eglibc-x86_64-core-image-sato-i586-toolchain-&DISTRO;.sh
                             </literallayout></para></listitem>
                         <listitem><para>Build your own toolchain installer.
                             For cases where you cannot use an installer
@@ -279,27 +285,32 @@
                     </itemizedlist></para></listitem>
                 <listitem><para>Once you have the installer, run it to install
                     the toolchain.
-                    You must change the permissions on the toolchain installer
-                    script so that it is executable.</para>
+                    <note>
+                        You must change the permissions on the toolchain
+                        installer script so that it is executable.
+                    </note></para>
                     <para>The following command shows how to run the installer
                     given a toolchain tarball for a 64-bit x86 development host
                     system and a 32-bit x86 target architecture.
                     The example assumes the toolchain installer is located
                     in <filename>~/Downloads/</filename>.
                     <literallayout class='monospaced'>
-     $ ~/Downloads/poky-eglibc-x86_64-core-image-sato-i586-&DISTRO;.sh
+     $ ~/Downloads/poky-eglibc-x86_64-core-image-sato-i586-toolchain-&DISTRO;.sh
                     </literallayout>
-                    <note>
-                        If you do not have write permissions for the directory
-                        into which you are installing the toolchain, the
-                        toolchain installer notifies you and exits.
-                        Be sure you have write permissions in the directory and
-                        run the installer again.
-                    </note>
-                    Once the tarball is expanded, the cross-toolchain is
+                    The first thing the installer prompts you for is the
+                    directory into which you want to install the toolchain.
+                    The default directory used is
+                    <filename>/opt/poky/&DISTRO;</filename>.
+                    If you do not have write permissions for the directory
+                    into which you are installing the toolchain, the
+                    toolchain installer notifies you and exits.
+                    Be sure you have write permissions in the directory and
+                    run the installer again.</para>
+                    <para>When the script finishes, the cross-toolchain is
                     installed.
                     You will notice environment setup files for the
-                    cross-toolchain in the directory.</para></listitem>
+                    cross-toolchain in the installation directory.
+                    </para></listitem>
             </orderedlist>
         </para>
     </section>
@@ -320,37 +331,43 @@
         <para>
             Follow these steps to generate the toolchain into the Build Directory:
             <orderedlist>
-                <listitem><para>Source the environment setup script
-                    <filename>&OE_INIT_FILE;</filename> located in the
+                <listitem><para><emphasis>Set up the Build Environment:</emphasis>
+                    Source the OpenEmbedded build environment setup
+                    script (i.e.
+                    <ulink url='&YOCTO_DOCS_REF_URL;#structure-core-script'><filename>&OE_INIT_FILE;</filename></ulink>
+                    or
+                    <ulink url='&YOCTO_DOCS_REF_URL;#structure-memres-core-script'><filename>oe-init-build-env-memres</filename></ulink>)
+                    located in the
                     <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink>.
                     </para></listitem>
-                <listitem><para>At this point, you should be sure that the
+                <listitem><para><emphasis>Check your Local Configuration File:</emphasis>
+                    At this point, you should be sure that the
                     <ulink url='&YOCTO_DOCS_REF_URL;#var-MACHINE'><filename>MACHINE</filename></ulink> variable
                     in the <filename>local.conf</filename> file found in the
                     <filename>conf</filename> directory of the Build Directory
                     is set for the target architecture.
-                    Comments within the <filename>local.conf</filename> file list the values you
-                    can use for the <filename>MACHINE</filename> variable.
-                    <note>You can populate the Build Directory with the cross-toolchains for more
-                        than a single architecture.
-                        You just need to edit the <filename>MACHINE</filename> variable in the
-                        <filename>local.conf</filename> file and re-run the BitBake
-                        command.</note></para></listitem>
-                <listitem><para>Run <filename>bitbake meta-ide-support</filename> to complete the
-                    cross-toolchain generation.
-                    <note>If you change out of your working directory after you
-                        <filename>source</filename> the environment setup script and before you run
-                        the BitBake command, the command might not work.
-                        Be sure to run the BitBake command immediately
-                        after checking or editing the <filename>local.conf</filename> but without
-                        changing out of your working directory.</note>
-                    Once the BitBake command finishes,
-                    the cross-toolchain is generated and populated within the Build Directory.
-                    You will notice environment setup files for the cross-toolchain in the
-                    Build Directory in the <filename>tmp</filename> directory.
-                    Setup script filenames contain the strings <filename>environment-setup</filename>.</para>
-                    <para>Be aware that when you use this method to install the toolchain you still need
-                    to separately extract and install the sysroot filesystem.
+                    Comments within the <filename>local.conf</filename> file
+                    list the values you can use for the
+                    <filename>MACHINE</filename> variable.
+                    <note>
+                        You can populate the Build Directory with the
+                        cross-toolchains for more than a single architecture.
+                        You just need to edit the <filename>MACHINE</filename>
+                        variable in the <filename>local.conf</filename> file and
+                        re-run the BitBake command.
+                    </note></para></listitem>
+                <listitem><para><emphasis>Generate the Cross-Toolchain:</emphasis>
+                    Run <filename>bitbake meta-ide-support</filename> to
+                    complete the cross-toolchain generation.
+                    Once the BitBake command finishes, the cross-toolchain is
+                    generated and populated within the Build Directory.
+                    You will notice environment setup files for the
+                    cross-toolchain that contain the string
+                    "<filename>environment-setup</filename>" in the
+                    Build Directory's <filename>tmp</filename> folder.</para>
+                    <para>Be aware that when you use this method to install the
+                    toolchain, you still need to separately extract and install
+                    the sysroot filesystem.
                     For information on how to do this, see the
                     "<link linkend='extracting-the-root-filesystem'>Extracting the Root Filesystem</link>" section.
                     </para></listitem>
@@ -437,8 +454,8 @@
             application from within the
             Eclipse IDE, you must have an image that contains the Yocto Target Communication
             Framework (TCF) agent (<filename>tcf-agent</filename>).
-            By default, the Yocto Project provides only one type pre-built image that contains the
-            <filename>tcf-agent</filename>.
+            By default, the Yocto Project provides only one type of pre-built
+            image that contains the <filename>tcf-agent</filename>.
             And, those images are SDK (e.g.<filename>core-image-sato-sdk</filename>).
         </para>
 
@@ -467,13 +484,16 @@
                             the following commands:
                             <literallayout class='monospaced'>
      $ git clone http://git.eclipse.org/gitroot/tcf/org.eclipse.tcf.agent.git
-     $ cd agent
+     $ cd org.eclipse.tcf.agent/agent
                             </literallayout></para></listitem>
-                        <listitem><para>Modify the <filename>Makefile.inc</filename> file
+                        <listitem><para>Locate the
+                            <filename>Makefile.inc</filename> file inside the
+                            <filename>agent</filename> folder and modify it
                             for the cross-compilation environment by setting the
                             <filename>OPSYS</filename> and
                             <ulink url='&YOCTO_DOCS_REF_URL;#var-MACHINE'><filename>MACHINE</filename></ulink>
-                            variables according to your target.</para></listitem>
+                            variables according to your target.
+                            </para></listitem>
                         <listitem><para>Use the cross-development tools to build the
                             <filename>tcf-agent</filename>.
                             Before you "Make" the file, be sure your cross-tools are set up first.
@@ -493,32 +513,63 @@
         <title>Extracting the Root Filesystem</title>
 
         <para>
-            You must extract the root filesystem if you want to boot the image using NFS
-            or you want to use the root filesystem as the target sysroot.
-            For example, the Eclipse IDE environment with the Eclipse Yocto Plug-in installed allows you
-            to use QEMU to boot under NFS.
-            Another example is if you want to develop your target application using the
-            root filesystem as the target sysroot.
+            If you install your toolchain by hand or build it using BitBake and
+            you need a root filesystem, you need to extract it separately.
+            If you use the ADT Installer to install the ADT, the root
+            filesystem is automatically extracted and installed.
+        </para>
+
+        <para>
+            Here are some cases where you need to extract the root filesystem:
+            <itemizedlist>
+                <listitem><para>You want to boot the image using NFS.
+                    </para></listitem>
+                <listitem><para>You want to use the root filesystem as the
+                    target sysroot.
+                    For example, the Eclipse IDE environment with the Eclipse
+                    Yocto Plug-in installed allows you to use QEMU to boot
+                    under NFS.</para></listitem>
+                <listitem><para>You want to develop your target application
+                    using the root filesystem as the target sysroot.
+                    </para></listitem>
+            </itemizedlist>
         </para>
 
         <para>
             To extract the root filesystem, first <filename>source</filename>
-            the cross-development environment setup script and then
-            use the <filename>runqemu-extract-sdk</filename> command on the
+            the cross-development environment setup script.
+            If you built the toolchain in the Build Directory, you will find
+            the toolchain environment script in the
+            <filename>tmp</filename> directory.
+            If you installed the toolchain by hand, the environment setup
+            script is located in <filename>/opt/poky/&DISTRO;</filename>.
+        </para>
+
+        <para>
+            After sourcing the environment script, use the
+            <filename>runqemu-extract-sdk</filename> command and provide the
             filesystem image.
-            For example, the following commands set up the environment and then extract
-            the root filesystem from a previously built filesystem image tarball named
-            <filename>core-image-sato-sdk-qemux86-2011091411831.rootfs.tar.bz2</filename>.
-            The example extracts the root filesystem into the <filename>$HOME/qemux86-sato</filename>
-            directory:
+        </para>
+
+        <para>
+            Following is an example.
+            The second command sets up the environment.
+            In this case, the setup script is located in the
+            <filename>/opt/poky/&DISTRO;</filename> directory.
+            The third command extracts the root filesystem from a previously
+            built filesystem that is located in the
+            <filename>~/Downloads</filename> directory.
+            Furthermore, this command extracts the root filesystem into the
+            <filename>qemux86-sato</filename> directory:
             <literallayout class='monospaced'>
-     $ source $HOME/toolchain_dir/environment-setup-i586-poky-linux
+     $ cd ~
+     $ source /opt/poky/&DISTRO;/environment-setup-i586-poky-linux
      $ runqemu-extract-sdk \
-        ~Downloads/core-image-sato-sdk-qemux86-2011091411831.rootfs.tar.bz2 \
+        ~/Downloads/core-image-sato-sdk-qemux86-2011091411831.rootfs.tar.bz2 \
         $HOME/qemux86-sato
             </literallayout>
-            In this case, you could now point to the target sysroot at
-            <filename>$HOME/qemux86-sato</filename>.
+            You could now point to the target sysroot at
+            <filename>qemux86-sato</filename>.
         </para>
     </section>
 </section>
@@ -528,30 +579,26 @@
 
     <para>
         As an alternative to locating and downloading a toolchain installer,
-        you can build the toolchain installer if you have a
-        <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>.
+        you can build the toolchain installer one of two ways if you have a
+        <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>:
+        <itemizedlist>
+            <listitem><para>Use <filename>bitbake meta-toolchain</filename>.
+                This method requires you to still install the target
+                sysroot by installing and extracting it separately.
+                For information on how to install the sysroot, see the
+                "<link linkend='extracting-the-root-filesystem'>Extracting the Root Filesystem</link>"
+                section.</para></listitem>
+            <listitem><para>Use
+                <filename>bitbake image -c populate_sdk</filename>.
+                This method has significant advantages over the previous method
+                because it results in a toolchain installer that contains the
+                sysroot that matches your target root filesystem.
+                </para></listitem>
+        </itemizedlist>
     </para>
 
     <para>
-        You can build the toolchain
-        installer using <filename>bitbake meta-toolchain</filename>.
-        This method requires you to still install the target
-        sysroot by installing and extracting it separately.
-        For information on how to install the sysroot, see the
-        "<link linkend='extracting-the-root-filesystem'>Extracting the Root Filesystem</link>" section.
-    </para>
-
-    <para>
-        A final method of building the toolchain installer exists that has
-        significant advantages over the previous method.
-        This method results in a toolchain installer that contains the sysroot
-        that matches your target root filesystem.
-        To build this installer, use the
-        <filename>bitbake image -c populate_sdk</filename> command.
-    </para>
-
-    <para>
-         Remember, before using any <filename>bitbake</filename> command, you
+         Remember, before using any BitBake command, you
          must source the build environment setup script
          (i.e.
          <ulink url='&YOCTO_DOCS_REF_URL;#structure-core-script'><filename>&OE_INIT_FILE;</filename></ulink>
@@ -567,12 +614,27 @@
          variable is correctly set if you are building a toolchain designed to
          run on an architecture that differs from your current development host
          machine (i.e. the build machine).
-     </para>
+    </para>
 
-     <para>
-         When the BitBake command completes, the toolchain installer will be in
-         <filename>tmp/deploy/sdk</filename> in the Build Directory.
-     </para>
+    <para>
+        When the BitBake command completes, the toolchain installer will be in
+        <filename>tmp/deploy/sdk</filename> in the Build Directory.
+        <note>
+            By default, this toolchain does not build static binaries.
+            If you want to use the toolchain to build these types of libraries,
+            you need to be sure your image has the appropriate static
+            development libraries.
+            Use the
+            <ulink url='&YOCTO_DOCS_REF_URL;#var-IMAGE_INSTALL'><filename>IMAGE_INSTALL</filename></ulink>
+            variable inside your <filename>local.conf</filename> file to
+            install the appropriate library packages.
+            Following is an example using <filename>eglibc</filename> static
+            development libraries:
+            <literallayout class='monospaced'>
+     IMAGE_INSTALL_append = " eglibc-staticdev"
+            </literallayout>
+        </note>
+    </para>
 </section>
 
 </chapter>

documentation/bsp-guide/bsp-guide.xml

@@ -78,6 +78,26 @@
                 <date>October 2013</date>
                 <revremark>Released with the Yocto Project 1.5 Release.</revremark>
             </revision>
+            <revision>
+                <revnumber>1.5.1</revnumber>
+                <date>January 2014</date>
+                <revremark>Released with the Yocto Project 1.5.1 Release.</revremark>
+            </revision>
+            <revision>
+                <revnumber>1.5.2</revnumber>
+                <date>May 2014</date>
+                <revremark>Released with the Yocto Project 1.5.2 Release.</revremark>
+            </revision>
+            <revision>
+                <revnumber>1.5.3</revnumber>
+                <date>July 2014</date>
+                <revremark>Released with the Yocto Project 1.5.3 Release.</revremark>
+            </revision>
+            <revision>
+                <revnumber>1.5.4</revnumber>
+                <date>December 2014</date>
+                <revremark>Released with the Yocto Project 1.5.4 Release.</revremark>
+            </revision>
         </revhistory>
 
     <copyright>
@@ -91,11 +111,10 @@
         the terms of the <ulink type="http" url="http://creativecommons.org/licenses/by-nc-sa/2.0/uk/">Creative Commons Attribution-Non-Commercial-Share Alike 2.0 UK: England &amp; Wales</ulink> as published by Creative Commons.
       </para>
       <note>
-          Due to production processes, there could be differences between the Yocto Project
-          documentation bundled in the release tarball and the
-          <ulink url='&YOCTO_DOCS_BSP_URL;'>Yocto Project Board Support Package (BSP) Developer's Guide</ulink> on
-          the <ulink url='&YOCTO_HOME_URL;'>Yocto Project</ulink> website.
-          For the latest version of this manual, see the manual on the website.
+          For the latest version of this manual associated with this
+          Yocto Project release, see the
+          <ulink url='&YOCTO_DOCS_BSP_URL;'>Yocto Project Board Support Package (BSP) Developer's Guide</ulink>
+          from the Yocto Project website.
       </note>
     </legalnotice>
 

documentation/bsp-guide/bsp.xml

@@ -394,12 +394,13 @@
 
             <para>
                 To use an include file, you simply include them in the machine configuration file.
-                For example, the Crown Bay BSP <filename>crownbay.conf</filename> has the
+                For example, the Crown Bay BSP <filename>crownbay.conf</filename> contains the
                 following statements:
                 <literallayout class='monospaced'>
      require conf/machine/include/tune-atom.inc
      require conf/machine/include/ia32-base.inc
      require conf/machine/include/meta-intel.inc
+     require conf/machine/include/meta-intel-emgd.inc
                 </literallayout>
             </para>
             </section>
@@ -420,7 +421,7 @@
                 <filename>formfactor_0.0.bbappend</filename> file, which is an
                 append file used to augment the recipe that starts the build.
                 Furthermore, there are machine-specific settings used during the
-                build that are defined by the <filename>machconfig</filename>.
+                build that are defined by the <filename>machconfig</filename> file.
                 In the Crown Bay example, two <filename>machconfig</filename> files
                 exist: one that supports the Intel® Embedded Media and Graphics
                 Driver (Intel® EMGD) and one that does not:
@@ -460,7 +461,7 @@
                 (VESA) graphics):
                 <literallayout class='monospaced'>
      meta-crownbay/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend
-     meta-crownbay/recipes-graphics/xorg-xserver/xserver-xf86-config/crownbay-noemgd/xorg.conf
+     meta-crownbay/recipes-graphics/xorg-xserver/xserver-xf86-config/crownbay/xorg.conf
                 </literallayout>
             </para>
             </section>
@@ -561,7 +562,7 @@
             <para>
                 For example, suppose you had some configuration options in a file called
                 <filename>network_configs.cfg</filename>.
-                You can place that file inside a directory named <filename>/linux-yocto</filename> and then add
+                You can place that file inside a directory named <filename>linux-yocto</filename> and then add
                 a <filename>SRC_URI</filename> statement such as the following to the append file.
                 When the OpenEmbedded build system builds the kernel, the configuration options are
                 picked up and applied.
@@ -747,7 +748,7 @@
                                 <listitem><para>Instructions on how to boot the BSP build from
                                     the BSP layer.</para></listitem>
                                 <listitem><para>Instructions on how to boot the binary images
-                                    contained in the <filename>/binary</filename> directory,
+                                    contained in the <filename>binary</filename> directory,
                                     if present.</para></listitem>
                                 <listitem><para>Information on any known bugs or issues that users
                                     should know about when either building or booting the BSP
@@ -758,7 +759,7 @@
                             <filename>meta-&lt;bsp_name&gt;</filename> directory.
                             This file specifies exactly where you can find the sources used to
                             generate the binary images contained in the
-                            <filename>/binary</filename> directory, if present.
+                            <filename>binary</filename> directory, if present.
                             See the
                             <ulink url='&YOCTO_GIT_URL;/cgit.cgi/meta-intel/tree/meta-fri2/README.sources'><filename>README.sources</filename></ulink>
                             file for the Fish River Island 2 BSP in the <filename>meta-fri2</filename> BSP layer

documentation/dev-manual/dev-manual-model.xml

@@ -18,8 +18,7 @@
              "<ulink url='&YOCTO_DOCS_BSP_URL;#creating-a-new-bsp-layer-using-the-yocto-bsp-script'>Creating a New BSP Layer Using the yocto-bsp Script</ulink>"
              section in the Yocto Project Board Support Package (BSP) Developer's Guide.
              For more complete information on how to work with the kernel, see the
-             <ulink url='&YOCTO_DOCS_KERNEL_DEV_URL;'>Yocto Project Linux Kernel
-             Development Manual</ulink>.
+             <ulink url='&YOCTO_DOCS_KERNEL_DEV_URL;'>Yocto Project Linux Kernel Development Manual</ulink>.
              </para></listitem>
          <listitem><para><emphasis>User Application Development:</emphasis>
              User Application Development covers development of applications that you intend
@@ -155,10 +154,11 @@
                     For more information on BSP layers, see the
                     "<ulink url='&YOCTO_DOCS_BSP_URL;#bsp-layers'>BSP Layers</ulink>" section in the
                     Yocto Project Board Support Package (BSP) Developer's Guide.</para>
-                    <note>Four BSPs exist that are part of the
-                    Yocto Project release: <filename>genericx86</filename>, <filename>beagleboard</filename>,
+                    <note>Five BSPs exist that are part of the
+                    Yocto Project release: <filename>genericx86</filename>, <filename>genericx86-64</filename>,
+                    <filename>beagleboard</filename>,
                     <filename>mpc8315e</filename>, and <filename>routerstationpro</filename>.
-                    The recipes and configurations for these four BSPs are located and dispersed
+                    The recipes and configurations for these five BSPs are located and dispersed
                     within the <link linkend='source-directory'>Source Directory</link>.
                     On the other hand, BSP layers for Chief River, Crown Bay,
                     Crystal Forest, Emenlow, Fish River Island 2, Jasper Forest, N450, NUC DC3217IYE,
@@ -218,10 +218,10 @@
         <para>
             You can view a video presentation on "Building Custom Embedded Images with Yocto"
             at <ulink url='http://free-electrons.com/blog/elc-2011-videos'>Free Electrons</ulink>.
-            You can also find supplemental information in
+            You can also find supplemental information in the
             <ulink url='&YOCTO_DOCS_BSP_URL;'>
-            The Board Support Package (BSP) Development Guide</ulink>.
-            Finally, there is wiki page write up of the example also located
+            Yocto Project Board Support Package (BSP) Developer's Guide</ulink>.
+            Finally, there is a wiki page write up of the example also located
             <ulink url='&YOCTO_WIKI_URL;/wiki/Transcript:_creating_one_generic_Atom_BSP_from_another'>
             here</ulink> that you might find helpful.
        </para>
@@ -1424,9 +1424,6 @@
                         "<ulink url='&YOCTO_DOCS_PROF_URL;#profile-manual-perf'>perf</ulink>"
                         section in the Yocto Project Profiling and Tracing
                         Manual.
-                        For information on LatencyTOP, see the
-                        <ulink url='https://latencytop.org/'>LatencyTOP</ulink>
-                        website.
                         </para></listitem>
                 </itemizedlist>
             </para>
@@ -1470,7 +1467,14 @@
                             the "Clone from Yocto Git Repository" box, which
                             would execute a <filename>git clone</filename>
                             command to get the project's Metadata files.
-                            </para></listitem>
+                            <note>
+                                Do not specify your BitBake Commander project
+                                location as your Eclipse workspace.
+                                Doing so causes an error indicating that the
+                                current project overlaps the location of
+                                another project.
+                                This error occurs even if no such project exits.
+                            </note></para></listitem>
                         <listitem><para>Select <filename>Finish</filename> to
                             create the project.</para></listitem>
                     </orderedlist>
@@ -1639,7 +1643,7 @@
             <filename>meta/conf/bitbake.conf</filename> configuration file in the
             <link linkend='source-directory'>Source Directory</link>:
             <literallayout class='monospaced'>
-     S = ${WORKDIR}/${BP}
+     S = "${WORKDIR}/${BP}"
             </literallayout>
             You should be aware that many recipes override the <filename>S</filename> variable.
             For example, recipes that fetch their source from Git usually set
@@ -1649,7 +1653,7 @@
                 <ulink url='&YOCTO_DOCS_REF_URL;#var-BP'><filename>BP</filename></ulink>
                 represents the base recipe name, which consists of the name and version:
                 <literallayout class='monospaced'>
-     BP = ${BPN}-${PV}
+     BP = "${BPN}-${PV}"
                 </literallayout>
             </note>
         </para>
@@ -1670,7 +1674,7 @@
             the following is the work directory for the <filename>acl</filename> recipe that
             creates the <filename>acl</filename> package:
             <literallayout class='monospaced'>
-     ~/poky/build/tmp/work/i586-poky-linux/acl/2.2.51-r3/
+     poky/build/tmp/work/i586-poky-linux/acl/2.2.51-r3/
             </literallayout>
         </para>
 
@@ -1686,8 +1690,8 @@
             for the <filename>acl</filename> package that is being
             built for a MIPS-based device:
             <literallayout class='monospaced'>
-     ~/poky/build/tmp/work/mips-poky-linux/acl/2.2.51-r2
-     ~/poky/build/tmp/work/mips-poky-linux/acl/2.2.51-r2/acl-2.2.51
+     poky/build/tmp/work/mips-poky-linux/acl/2.2.51-r2
+     poky/build/tmp/work/mips-poky-linux/acl/2.2.51-r2/acl-2.2.51
             </literallayout>
         </para>
 
@@ -1698,6 +1702,7 @@
             <ulink url='&YOCTO_DOCS_REF_URL;#var-TMPDIR'><filename>TMPDIR</filename></ulink>,
             <ulink url='&YOCTO_DOCS_REF_URL;#var-TOPDIR'><filename>TOPDIR</filename></ulink>,
             <ulink url='&YOCTO_DOCS_REF_URL;#var-PACKAGE_ARCH'><filename>PACKAGE_ARCH</filename></ulink>,
+            <ulink url='&YOCTO_DOCS_REF_URL;#var-MULTIMACH_TARGET_SYS'><filename>MULTIMACH_TARGET_SYS</filename></ulink>,
             <ulink url='&YOCTO_DOCS_REF_URL;#var-TARGET_OS'><filename>TARGET_OS</filename></ulink>,
             <ulink url='&YOCTO_DOCS_REF_URL;#var-PN'><filename>PN</filename></ulink>,
             <ulink url='&YOCTO_DOCS_REF_URL;#var-PV'><filename>PV</filename></ulink>,

documentation/dev-manual/dev-manual-newbie.xml

@@ -429,15 +429,17 @@
     <para>
         For any supported release of Yocto Project, you can go to the
         <ulink url='&YOCTO_HOME_URL;'>Yocto Project Website</ulink> and
-        select the "Downloads" tab and get a tarball of the release.
-        You can also go to this site to download any supported BSP tarballs.
-        Unpacking the tarball gives you a hierarchical Source Directory that lets you develop
-        using the Yocto Project.
-    </para>
-
-    <para>
-        Once you are set up through either tarball extraction or a checkout of Git repositories,
-        you are ready to develop.
+        select the "Downloads" tab and get a released tarball of the
+        <filename>poky</filename> repository or any supported BSP tarballs.
+        Unpacking these tarballs gives you a snapshot of the released
+        files.
+        <note>
+            The recommended method for setting up the Yocto Project
+            <link linkend='source-directory'>Source Directory</link> and the
+            files for supported BSPs (e.g., <filename>meta-intel</filename>) is to
+            use <link linkend='git'>Git</link> to create a local copy of the
+            upstream repositories.
+        </note>
     </para>
 
     <para>
@@ -514,27 +516,40 @@
                 The <ulink url='&YOCTO_DOCS_REF_URL;#var-TOPDIR'><filename>TOPDIR</filename></ulink>
                 variable points to the Build Directory.</para>
 
-                <para>You have a lot of flexibility when creating the Build Directory.
-                Following are some examples that show how to create the directory:
+                <para>
+                    You have a lot of flexibility when creating the Build
+                    Directory.
+                    Following are some examples that show how to create the
+                    directory.
+                    The examples assume your
+                    <link linkend='source-directory'>Source Directory</link> is
+                    named <filename>poky</filename>:
                    <itemizedlist>
-                        <listitem><para>Create the Build Directory in your current working directory
-                            and name it <filename>build</filename>.
-                            This is the default behavior.
+                        <listitem><para>Create the Build Directory inside your
+                            Source Directory and let the name of the Build
+                            Directory default to <filename>build</filename>:
                             <literallayout class='monospaced'>
-     $ source &OE_INIT_PATH;
+     $ cd $HOME/poky
+     $ source &OE_INIT_FILE;
                             </literallayout></para></listitem>
-                        <listitem><para>Provide a directory path and specifically name the build
-                            directory.
-                            This next example creates a Build Directory named <filename>YP-&POKYVERSION;</filename>
-                            in your home directory within the directory <filename>mybuilds</filename>.
-                            If <filename>mybuilds</filename> does not exist, the directory is created for you:
+                        <listitem><para>Create the Build Directory inside your
+                            home directory and specifically name it
+                            <filename>test-builds</filename>:
                             <literallayout class='monospaced'>
-     $ source &OE_INIT_PATH; $HOME/mybuilds/YP-&POKYVERSION;
+     $ cd $HOME
+     $ source poky/&OE_INIT_FILE; test-builds
                             </literallayout></para></listitem>
-                        <listitem><para>Provide an existing directory to use as the Build Directory
-                            and use the default <filename>build</filename> name.
+                        <listitem><para>Provide a directory path and
+                            specifically name the build directory.
+                            Any intermediate folders in the pathname must
+                            exist.
+                            This next example creates a Build Directory named
+                            <filename>YP-&POKYVERSION;</filename>
+                            in your home directory within the existing
+                            directory <filename>mybuilds</filename>:
                             <literallayout class='monospaced'>
-     $ source &OE_INIT_PATH; $HOME/mybuilds/
+     $cd $HOME
+     $ source $HOME/poky/&OE_INIT_FILE; $HOME/mybuilds/YP-&POKYVERSION;
                             </literallayout></para></listitem>
                     </itemizedlist>
                 </para></listitem>
@@ -647,6 +662,17 @@
                 <ulink url='&YOCTO_DOCS_REF_URL;#var-PV'><filename>PV</filename></ulink>, and
                 <ulink url='&YOCTO_DOCS_REF_URL;#var-PE'><filename>PE</filename></ulink>).
                 </para></listitem>
+            <listitem><para><emphasis>Package Groups:</emphasis>
+                Arbitrary groups of software Recipes.
+                You use package groups to hold recipes that, when built,
+                usually accomplish a single task.
+                For example, a package group could contain the recipes for a
+                company’s proprietary or value-add software.
+                Or, the package group could contain the recipes that enable
+                graphics.
+                A package group is really just another recipe.
+                Because package group files are recipes, they end with the
+                <filename>.bb</filename> filename extension.</para></listitem>
             <listitem><para id='poky'><emphasis>Poky:</emphasis> The term "poky" can mean several things.
                 In its most general sense, it is an open-source project that was initially developed
                 by OpenedHand.  With OpenedHand, poky was developed off of the existing OpenEmbedded
@@ -716,13 +742,12 @@
                 see the
                 "<link linkend='repositories-tags-and-branches'>Repositories, Tags, and Branches</link>"
                 section.</para></listitem>
-            <listitem><para><emphasis>Tasks:</emphasis> Arbitrary groups of software Recipes.
-                You use tasks to hold recipes that, when built, usually accomplish a single task.
-                For example, a task could contain the recipes for a company’s proprietary or value-add software.
-                Or, the task could contain the recipes that enable graphics.
-                A task is really just another recipe.
-                Because task files are recipes, they end with the <filename>.bb</filename> filename
-                extension.</para></listitem>
+            <listitem><para><emphasis>Task:</emphasis>
+                A unit of execution for BitBake (e.g.
+                <filename>do_compile</filename>,
+                <filename>do_fetch</filename>, <filename>do_patch</filename>,
+                and so forth).
+                </para></listitem>
             <listitem><para><emphasis>Upstream:</emphasis> A reference to source code or repositories
                 that are not local to the development system but located in a master area that is controlled
                 by the maintainer of the source code.
@@ -807,7 +832,8 @@
     <title>Git</title>
 
     <para>
-        The Yocto Project uses Git, which is a free, open source distributed version control system.
+        The Yocto Project makes extensive use of Git,
+        which is a free, open source distributed version control system.
         Git supports distributed development, non-linear development, and can handle large projects.
         It is best that you have some fundamental understanding of how Git tracks projects and
         how to work with Git if you are going to use the Yocto Project for development.
@@ -911,7 +937,7 @@
             local working branch based on a branch name,
             your local environment matches the "tip" of that development branch
             at the time you created your local branch, which could be
-            different than the files at the time of a similarly named release.
+            different from the files at the time of a similarly named release.
             In other words, creating and checking out a local branch based on the
             <filename>&DISTRO_NAME;</filename> branch name is not the same as
             cloning and checking out the <filename>master</filename> branch.
@@ -1004,7 +1030,7 @@
                     will allow the change, and for ultimately pushing the change from your local Git repository
                     into the project’s upstream (or master) repository.</para></listitem>
                 <listitem><para><emphasis><filename>git status</filename>:</emphasis> Reports any modified files that
-                    possibly need staged and committed.</para></listitem>
+                    possibly need to be staged and committed.</para></listitem>
                 <listitem><para><emphasis><filename>git checkout &lt;branch-name&gt;</filename>:</emphasis> Changes
                     your working branch.
                     This command is analogous to "cd".</para></listitem>
@@ -1281,10 +1307,9 @@
             <listitem><para><emphasis>Board Support Package (BSP) README Files:</emphasis>
                 For BSP maintainers of supported BSPs, you can examine
                 individual BSP <filename>README</filename> files.
-                Alternatively, you can examine the
-                <filename>MAINTAINERS</filename> file, which is found in the
-                <filename>meta-intel</filename>, for a list of all supported
-                BSP maintainers.
+                In addition, some layers (such as the <filename>meta-intel</filename> layer),
+                include a <filename>MAINTAINERS</filename> file which contains
+                a list of all supported BSP maintainers for that layer.
                 </para></listitem>
             <listitem><para><emphasis>Search by File:</emphasis>
                 Using <link linkend='git'>Git</link>, you can enter the
@@ -1459,8 +1484,8 @@
                     <para>For help on using these scripts, simply provide the
                     <filename>-h</filename> argument as follows:
                     <literallayout class='monospaced'>
-     $ ~/poky/scripts/create-pull-request -h
-     $ ~/poky/scripts/send-pull-request -h
+     $ poky/scripts/create-pull-request -h
+     $ poky/scripts/send-pull-request -h
                     </literallayout></para></listitem>
             </itemizedlist>
         </para>

documentation/dev-manual/dev-manual-start.xml

@@ -55,12 +55,12 @@
     <title>Getting Set Up</title>
 
     <para>
-        Here is what you need to get set up to use the Yocto Project:
+        Here is what you need to use the Yocto Project:
         <itemizedlist>
-            <listitem><para><emphasis>Host System:</emphasis>  You should have a reasonably current
-                Linux-based host system.
+            <listitem><para><emphasis>Host System:</emphasis>
+                You should have a reasonably current Linux-based host system.
                 You will have the best results with a recent release of Fedora,
-                OpenSUSE, Debian, Ubuntu, or CentOS as these releases are frequently tested against the Yocto Project
+                openSUSE, Debian, Ubuntu, or CentOS as these releases are frequently tested against the Yocto Project
                 and officially supported.
                 For a list of the distributions under validation and their status, see the
                 "<ulink url='&YOCTO_DOCS_REF_URL;#detailed-supported-distros'>Supported Linux Distributions</ulink>" section
@@ -69,23 +69,35 @@
                 <para>
                 You should also have about 100 gigabytes of free disk space for building images.
                 </para></listitem>
-            <listitem><para><emphasis>Packages:</emphasis>  The OpenEmbedded build system
-                requires certain packages exist on your development system (e.g. Python 2.6 or 2.7).
+            <listitem><para><emphasis>Packages:</emphasis>
+                The OpenEmbedded build system requires that certain packages
+                exist on your development system (e.g. Python 2.6 or 2.7).
                 See "<ulink url='&YOCTO_DOCS_QS_URL;#packages'>The Packages</ulink>"
                 section in the Yocto Project Quick Start and the
                 "<ulink url='&YOCTO_DOCS_REF_URL;#required-packages-for-the-host-development-system'>Required Packages for the Host Development System</ulink>"
                 section in the Yocto Project Reference Manual for the exact
                 package requirements and the installation commands to install
-                them for the supported distributions.
-                </para></listitem>
+                them for the supported distributions.</para></listitem>
             <listitem id='local-yp-release'><para><emphasis>Yocto Project Release:</emphasis>
-                You need a release of the Yocto Project.
-                You set that up with a local <link linkend='source-directory'>Source Directory</link>
-                one of two ways depending on whether you
-                are going to contribute back into the Yocto Project or not.
-                <note>
-                    Regardless of the method you use, this manual refers to the resulting local
-                    hierarchical set of files as the "Source Directory."
+                You need a release of the Yocto Project installed locally on
+                your development system.
+                This local area is referred to as the
+                <link linkend='source-directory'>Source Directory</link>
+                and is created when you use
+                <link linkend='git'>Git</link> to clone a local copy
+                of the upstream <filename>poky</filename> repository,
+                or when you download an official release of the corresponding
+                tarball.</para>
+                <para>Working from a copy of the upstream repository allows you
+                to contribute back into the Yocto Project or simply work with
+                the latest software on a development branch.
+                Because Git maintains and creates an upstream repository with
+                a complete history of changes and you are working with a local
+                clone of that repository, you have access to all the Yocto
+                Project development branches and tag names used in the upstream
+                repository.
+                <note>You can view the Yocto Project Source Repositories at
+                    <ulink url='&YOCTO_GIT_URL;/cgit.cgi'></ulink>
                 </note>
                 <itemizedlist>
                     <listitem><para><emphasis>Tarball Extraction:</emphasis>
@@ -97,27 +109,40 @@
                         directory of your choice.</para>
                         <para>For example, the following command extracts the
                         Yocto Project &DISTRO; release tarball
-                        into the current working directory and sets up the local Source Directory
-                        with a top-level folder named <filename>&YOCTO_POKY;</filename>:
+                        into the current working directory and sets up the local
+                        Source Directory
+                        with a top-level folder named
+                        <filename>&YOCTO_POKY;</filename>:
                         <literallayout class='monospaced'>
      $ tar xfj &YOCTO_POKY_TARBALL;
                         </literallayout></para>
-                        <para>This method does not produce a local Git repository.
-                        Instead, you simply end up with a snapshot of the release.</para></listitem>
-                    <listitem><para><emphasis>Git Repository Method:</emphasis>  If you are going to be contributing
-                        back into the Yocto Project or you simply want to keep up
-                        with the latest developments, you should use Git commands to set up a local
-                        Git repository of the upstream <filename>poky</filename> source repository.
-                        Doing so creates a repository with a complete history of changes and allows
-                        you to easily submit your changes upstream to the project.
-                        Because you clone the repository, you have access to all the Yocto Project development
-                        branches and tag names used in the upstream repository.</para>
-                        <note>You can view the Yocto Project Source Repositories at
-                        <ulink url='&YOCTO_GIT_URL;/cgit.cgi'></ulink></note>
-                        <para>The following transcript shows how to clone the <filename>poky</filename>
-                        Git repository into the current working directory.
-                        The command creates the local repository in a directory named <filename>poky</filename>.
-                        For information on Git used within the Yocto Project, see the
+                        <para>This method does not produce a local Git
+                        repository.
+                        Instead, you simply end up with a snapshot of the
+                        release.</para></listitem>
+                    <listitem><para><emphasis>Git Repository Method:</emphasis>
+                        If you are going to be contributing back into the Yocto
+                        Project or you simply want to keep up with the latest
+                        developments, you should use Git commands to set up a
+                        local Git repository of the upstream
+                        <filename>poky</filename> source repository.
+                        Doing so creates a repository with a complete history
+                        of changes and allows you to easily submit your changes
+                        upstream to the project.
+                        Because you clone the repository, you have access to all
+                        the Yocto Project development branches and tag names
+                        used in the upstream repository.
+                        <note>You can view the Yocto Project Source Repositories
+                            at
+                            <ulink url='&YOCTO_GIT_URL;/cgit.cgi'></ulink>
+                        </note></para>
+                        <para>The following transcript shows how to clone the
+                        <filename>poky</filename> Git repository into the
+                        current working directory.
+                        The command creates the local repository in a directory
+                        named <filename>poky</filename>.
+                        For information on Git used within the Yocto Project,
+                        see the
                         "<link linkend='git'>Git</link>" section.
                         <literallayout class='monospaced'>
      $ git clone git://git.yoctoproject.org/poky
@@ -127,16 +152,19 @@
      remote: Total 203728 (delta 147444), reused 202891 (delta 146614)
      Receiving objects: 100% (203728/203728), 95.54 MiB | 308 KiB/s, done.
      Resolving deltas: 100% (147444/147444), done.
-                        </literallayout></para>
-                        <para>For another example of how to set up your own local Git repositories, see this
-                        <ulink url='&YOCTO_WIKI_URL;/wiki/Transcript:_from_git_checkout_to_meta-intel_BSP'>
-                        wiki page</ulink>, which describes how to create both <filename>poky</filename>
-                        and <filename>meta-intel</filename> Git repositories.</para></listitem>
+                        </literallayout>
+                        For another example of how to set up your own local
+                        Git repositories, see this
+                        <ulink url='&YOCTO_WIKI_URL;/wiki/Transcript:_from_git_checkout_to_meta-intel_BSP'>wiki page</ulink>,
+                        which describes how to create both
+                        <filename>poky</filename> and
+                        <filename>meta-intel</filename> Git repositories.
+                        </para></listitem>
                 </itemizedlist></para></listitem>
             <listitem id='local-kernel-files'><para><emphasis>Yocto Project Kernel:</emphasis>
                 If you are going to be making modifications to a supported Yocto Project kernel, you
                 need to establish local copies of the source.
-                You can find Git repositories of supported Yocto Project Kernels organized under
+                You can find Git repositories of supported Yocto Project kernels organized under
                 "Yocto Linux Kernel" in the Yocto Project Source Repositories at
                 <ulink url='&YOCTO_GIT_URL;/cgit.cgi'></ulink>.</para>
                 <para>This setup can involve creating a bare clone of the Yocto Project kernel and then
@@ -155,7 +183,7 @@
                 <filename>linux-yocto-3.10.git</filename>, while the
                 copy is named <filename>my-linux-yocto-3.10-work</filename>:
                 <literallayout class='monospaced'>
-     $ git clone --bare git://git.yoctoproject.org/linux-yocto-3.10 linux-yocto-3.10.git
+     $ git clone &dash;&dash;bare git://git.yoctoproject.org/linux-yocto-3.10 linux-yocto-3.10.git
      Cloning into bare repository 'linux-yocto-3.10.git'...
      remote: Counting objects: 3364487, done.
      remote: Compressing objects: 100% (507178/507178), done.
@@ -221,29 +249,39 @@
                 </literallayout>
                 See the
                 "<ulink url='&YOCTO_DOCS_BSP_URL;#bsp-layers'>BSP Layers</ulink>"
-                section in the Yocto Project Board Support Package (BSP) Developer's Guide for more
-                information on BSP Layers.
+                section in the Yocto Project Board Support Package (BSP)
+                Developer's Guide for more information on BSP Layers.
                 <itemizedlist>
-                    <listitem><para><emphasis>Tarball Extraction:</emphasis>  You can download any released
-                        BSP tarball from the same "Downloads" page of the
-                        <ulink url='&YOCTO_HOME_URL;'>Yocto Project Website</ulink>
+                    <listitem><para><emphasis>Tarball Extraction:</emphasis>
+                        You can download any released BSP tarball from the same
+                        "Downloads" page of the Yocto Project
+                        <ulink url='https://www.yoctoproject.org/downloads'>Website</ulink>
                         to get the Yocto Project release.
                         Once on the "Download" page, look to the right of the
                         page and scroll down to find the BSP tarballs.</para>
-                        <para>Once you have the tarball, just extract it into a directory of your choice.
-                        Again, this method just produces a snapshot of the BSP layer in the form
-                        of a hierarchical directory structure.</para></listitem>
-                    <listitem><para><emphasis>Git Repository Method:</emphasis>  If you are working
-                        with a local Git repository for your Source Directory, you should also use this method
-                        to set up the <filename>meta-intel</filename> Git repository.
-                        You can locate the <filename>meta-intel</filename> Git repository in the
-                        "Yocto Metadata Layers" area of the Yocto Project Source Repositories at
+                        <para>Once you have the tarball, just extract it into a
+                        directory of your choice.
+                        Again, this method just produces a snapshot of the BSP
+                        layer in the form of a hierarchical directory
+                        structure.</para></listitem>
+                    <listitem><para><emphasis>Git Repository Method:</emphasis>
+                        If you are working with a local Git repository for your
+                        Source Directory, you should also use this method to
+                        set up the <filename>meta-intel</filename> Git
+                        repository.
+                        You can locate the <filename>meta-intel</filename> Git
+                        repository in the "Yocto Metadata Layers" area of the
+                        Yocto Project Source Repositories at
                         <ulink url='&YOCTO_GIT_URL;/cgit.cgi'></ulink>.</para>
-                        <para>Typically, you set up the <filename>meta-intel</filename> Git repository inside
+                        <para>Using
+                        <link linkend='git'>Git</link> to create a local clone
+                        of the upstream repository can be helpful if you are
+                        working with BSPs.
+                        Typically, you set up the
+                        <filename>meta-intel</filename> Git repository inside
                         the Source Directory.
-                        For example, the following transcript shows the steps to clone the
-                        <filename>meta-intel</filename>
-                        Git repository inside the local <filename>poky</filename> Git repository.
+                        For example, the following transcript shows the steps
+                        to clone <filename>meta-intel</filename>.
                         <literallayout class='monospaced'>
      $ cd ~/poky
      $ git clone git://git.yoctoproject.org/meta-intel.git
@@ -253,12 +291,12 @@
      remote: Total 7366 (delta 3997), reused 7299 (delta 3930)
      Receiving objects: 100% (7366/7366), 2.31 MiB | 95 KiB/s, done.
      Resolving deltas: 100% (3997/3997), done.
-                        </literallayout></para>
-                        <para>The same
+                        </literallayout>
+                        The same
                         <ulink url='&YOCTO_WIKI_URL;/wiki/Transcript:_from_git_checkout_to_meta-intel_BSP'>wiki page</ulink>
                         referenced earlier covers how to
-                        set up the <filename>meta-intel</filename> Git repository.
-                        </para></listitem>
+                        set up the <filename>meta-intel</filename> Git
+                        repository.</para></listitem>
                 </itemizedlist></para></listitem>
             <listitem><para><emphasis>Eclipse Yocto Plug-in:</emphasis>  If you are developing
                 applications using the Eclipse Integrated Development Environment (IDE),

documentation/dev-manual/dev-manual.xml

@@ -56,6 +56,26 @@
                 <date>October 2013</date>
                 <revremark>Released with the Yocto Project 1.5 Release.</revremark>
             </revision>
+            <revision>
+                <revnumber>1.5.1</revnumber>
+                <date>January 2014</date>
+                <revremark>Released with the Yocto Project 1.5.1 Release.</revremark>
+            </revision>
+            <revision>
+                <revnumber>1.5.2</revnumber>
+                <date>May 2014</date>
+                <revremark>Released with the Yocto Project 1.5.2 Release.</revremark>
+            </revision>
+            <revision>
+                <revnumber>1.5.3</revnumber>
+                <date>July 2014</date>
+                <revremark>Released with the Yocto Project 1.5.3 Release.</revremark>
+            </revision>
+            <revision>
+                <revnumber>1.5.4</revnumber>
+                <date>December 2014</date>
+                <revremark>Released with the Yocto Project 1.5.4 Release.</revremark>
+            </revision>
         </revhistory>
 
     <copyright>
@@ -72,11 +92,10 @@
       </para>
 
       <note>
-          Due to production processes, there could be differences between the Yocto Project
-          documentation bundled in the release tarball and the
-          <ulink url='&YOCTO_DOCS_DEV_URL;'>Yocto Project Development Manual</ulink> on
-          the <ulink url='&YOCTO_HOME_URL;'>Yocto Project</ulink> website.
-          For the latest version of this manual, see the manual on the website.
+          For the latest version of this manual associated with this
+          Yocto Project release, see the
+          <ulink url='&YOCTO_DOCS_DEV_URL;'>Yocto Project Development Manual</ulink>
+          from the Yocto Project website.
       </note>
     </legalnotice>
 

documentation/kernel-dev/kernel-dev-common.xml

@@ -95,7 +95,7 @@
                 <ulink url='&YOCTO_DOCS_REF_URL;#var-FILESEXTRAPATHS'><filename>FILESEXTRAPATHS</filename></ulink>
                 variable as follows:
                 <literallayout class='monospaced'>
-     FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}"
+     FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
                 </literallayout>
                 The path <filename>${</filename><ulink url='&YOCTO_DOCS_REF_URL;#var-THISDIR'><filename>THISDIR</filename></ulink><filename>}/${</filename><ulink url='&YOCTO_DOCS_REF_URL;#var-PN'><filename>PN</filename></ulink><filename>}</filename>
                 expands to "linux-yocto" in the current directory for this

documentation/kernel-dev/kernel-dev-maint-appx.xml

@@ -45,7 +45,7 @@
             Here is an example that assumes the local Git repository for the kernel is in
             a top-level directory named <filename>linux-yocto-3.4</filename>:
             <literallayout class='monospaced'>
-     $ cd ~/linux-yocto-3.4
+     $ cd linux-yocto-3.4
      $ git checkout -b meta origin/meta
             </literallayout>
             Once you have checked out and switched to the <filename>meta</filename> branch,
@@ -208,7 +208,7 @@
             the build tree directory.
             The files include the final <filename>.config</filename> file, all the <filename>.o</filename>
             files, the <filename>.a</filename> files, and so forth.
-            Since each machine or BSP has its own separate 
+            Since each machine or BSP has its own separate
             <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
             in its own separate branch
             of the Git repository, you can easily switch between different builds.

documentation/kernel-dev/kernel-dev.xml

@@ -41,6 +41,26 @@
                 <date>October 2013</date>
                 <revremark>Released with the Yocto Project 1.5 Release.</revremark>
             </revision>
+            <revision>
+                <revnumber>1.5.1</revnumber>
+                <date>January 2014</date>
+                <revremark>Released with the Yocto Project 1.5.1 Release.</revremark>
+            </revision>
+            <revision>
+                <revnumber>1.5.2</revnumber>
+                <date>May 2014</date>
+                <revremark>Released with the Yocto Project 1.5.2 Release.</revremark>
+            </revision>
+            <revision>
+                <revnumber>1.5.3</revnumber>
+                <date>July 2014</date>
+                <revremark>Released with the Yocto Project 1.5.3 Release.</revremark>
+            </revision>
+            <revision>
+                <revnumber>1.5.4</revnumber>
+                <date>December 2014</date>
+                <revremark>Released with the Yocto Project 1.5.4 Release.</revremark>
+            </revision>
         </revhistory>
 
     <copyright>
@@ -54,11 +74,10 @@
         the terms of the <ulink type="http" url="http://creativecommons.org/licenses/by-sa/2.0/uk/">Creative Commons Attribution-Share Alike 2.0 UK: England &amp; Wales</ulink> as published by Creative Commons.
       </para>
       <note>
-          Due to production processes, there could be differences between the Yocto Project
-          documentation bundled in the release tarball and the
-          <ulink url='&YOCTO_DOCS_KERNEL_DEV_URL;'>Yocto Project Linux Kernel Development Manual</ulink> on
-          the <ulink url='&YOCTO_HOME_URL;'>Yocto Project</ulink> website.
-          For the latest version of this manual, see the manual on the website.
+          For the latest version of this manual associated with this
+          Yocto Project release, see the
+          <ulink url='&YOCTO_DOCS_KERNEL_DEV_URL;'>Yocto Project Linux Kernel Development Manual</ulink>
+          from the Yocto Project website.
       </note>
     </legalnotice>
 

documentation/poky.ent

@@ -1,11 +1,11 @@
-<!ENTITY DISTRO "1.5">
-<!ENTITY DISTRO_COMPRESSED "15">
+<!ENTITY DISTRO "1.5.4">
+<!ENTITY DISTRO_COMPRESSED "154">
 <!ENTITY DISTRO_NAME "dora">
-<!ENTITY YOCTO_DOC_VERSION "1.5">
-<!ENTITY POKYVERSION "10.0.0">
-<!ENTITY POKYVERSION_COMPRESSED "1000">
+<!ENTITY YOCTO_DOC_VERSION "1.5.4">
+<!ENTITY POKYVERSION "10.0.4">
+<!ENTITY POKYVERSION_COMPRESSED "1004">
 <!ENTITY YOCTO_POKY "poky-&DISTRO_NAME;-&POKYVERSION;">
-<!ENTITY COPYRIGHT_YEAR "2010-2013">
+<!ENTITY COPYRIGHT_YEAR "2010-2014">
 <!ENTITY YOCTO_DL_URL "http://downloads.yoctoproject.org">
 <!ENTITY YOCTO_HOME_URL "http://www.yoctoproject.org">
 <!ENTITY YOCTO_LISTS_URL "http://lists.yoctoproject.org">
@@ -14,9 +14,9 @@
 <!ENTITY YOCTO_AB_URL "http://autobuilder.yoctoproject.org">
 <!ENTITY YOCTO_GIT_URL "http://git.yoctoproject.org">
 <!ENTITY YOCTO_ADTREPO_URL "http://adtrepo.yoctoproject.org">
-<!ENTITY YOCTO_RELEASE_NOTES "&YOCTO_HOME_URL;/download/yocto-project-&DISTRO_COMPRESSED;-poky-&POKYVERSION_COMPRESSED;">
+<!ENTITY YOCTO_RELEASE_NOTES "&YOCTO_HOME_URL;/downloads/core/&DISTRO_NAME;&DISTRO_COMPRESSED;">
 <!ENTITY OE_HOME_URL "http://www.openembedded.org">
-<!ENTITY OE_LISTS_URL "http://lists.linuxtogo.org/cgi-bin/mailman">
+<!ENTITY OE_LISTS_URL "http://lists.openembedded.org/mailman">
 <!ENTITY OE_DOCS_URL "http://docs.openembedded.org">
 <!ENTITY OH_HOME_URL "http://o-hand.com">
 <!ENTITY BITBAKE_HOME_URL "http://developer.berlios.de/projects/bitbake/">
@@ -54,7 +54,7 @@
 <!ENTITY YOCTO_POKY_TARBALL "&YOCTO_POKY;.tar.bz2">
 <!ENTITY OE_INIT_PATH "&YOCTO_POKY;/oe-init-build-env">
 <!ENTITY OE_INIT_FILE "oe-init-build-env">
-<!ENTITY UBUNTU_HOST_PACKAGES_ESSENTIAL "gawk wget git-core diffstat unzip texinfo \
+<!ENTITY UBUNTU_HOST_PACKAGES_ESSENTIAL "gawk wget git-core diffstat unzip texinfo gcc-multilib \
      build-essential chrpath">
 <!ENTITY FEDORA_HOST_PACKAGES_ESSENTIAL "gawk make wget tar bzip2 gzip python unzip perl patch \
      diffutils diffstat git cpp gcc gcc-c++ glibc-devel texinfo chrpath \

documentation/profile-manual/profile-manual-intro.xml

@@ -4,7 +4,7 @@
 
 <chapter id='profile-manual-intro'>
 
-<title>Yocto Project Tracing and Profiling Manual</title>
+<title>Yocto Project Profiling and Tracing Manual</title>
     <section id='intro'>
         <title>Introduction</title>
 
@@ -78,7 +78,7 @@
         </para>
 
         <para>
-            If you've already build a stripped image, you can generate
+            If you've already built a stripped image, you can generate
             debug packages (xxx-dbg) which you can manually install as
             needed.
         </para>

documentation/profile-manual/profile-manual-usage.xml

@@ -22,7 +22,7 @@
     <para>
         Don't let the fact that it's part of the kernel fool you into thinking
         that it's only for tracing and profiling the kernel - you can indeed
-        use it to trace and profile just the kernel , but you can also use it
+        use it to trace and profile just the kernel, but you can also use it
         to profile specific applications separately (with or without kernel
         context), and you can also use it to trace and profile the kernel
         and all applications on the system simultaneously to gain a system-wide
@@ -30,10 +30,10 @@
     </para>
 
     <para>
-        In many ways, it aims to be a superset of all the tracing and profiling
+        In many ways, perf aims to be a superset of all the tracing and profiling
         tools available in Linux today, including all the other tools covered
         in this HOWTO. The past couple of years have seen perf subsume a lot
-        of the functionality of those other tools, and at the same time those
+        of the functionality of those other tools and, at the same time, those
         other tools have removed large portions of their previous functionality
         and replaced it with calls to the equivalent functionality now
         implemented by the perf subsystem. Extrapolation suggests that at
@@ -126,7 +126,7 @@
      wget <ulink url='http://downloads.yoctoproject.org/mirror/sources/linux-2.6.19.2.tar.bz2'>http://downloads.yoctoproject.org/mirror/sources/linux-2.6.19.2.tar.bz2</ulink>
                 </literallayout>
                 The quickest and easiest way to get some basic overall data about
-                what's going on for a particular workload it to profile it using
+                what's going on for a particular workload is to profile it using
                 'perf stat'. 'perf stat' basically profiles using a few default
                 counters and displays the summed counts at the end of the run:
                 <literallayout class='monospaced'>
@@ -201,7 +201,7 @@
                 As our first attempt at profiling this workload, we'll simply
                 run 'perf record', handing it the workload we want to profile
                 (everything after 'perf record' and any perf options we hand
-                it - here none - will be executedin a new shell). perf collects
+                it - here none - will be executed in a new shell). perf collects
                 samples until the process exits and records them in a file named
                 'perf.data' in the current working directory.
                 <literallayout class='monospaced'>
@@ -241,7 +241,7 @@
                 Notice also that the above report shows an entry for 'busybox',
                 which is the executable that implements 'wget' in Yocto, but that
                 instead of a useful function name in that entry, it displays
-                an not-so-friendly hex value instead. The steps below will show
+                a not-so-friendly hex value instead. The steps below will show
                 how to fix that problem.
             </para>
 
@@ -308,7 +308,7 @@
             </para>
 
             <para>
-                Notice also that here there's also a case where the a hex value
+                Notice also that here there's also a case where the hex value
                 is displayed in the callstack, here in the expanded
                 sys_clock_gettime() function. Later we'll see it resolve to a
                 userspace function call in busybox.
@@ -367,7 +367,7 @@
 
             <para>
                 To generate the debug info for the packages in the image, we can
-                to add dbg-pkgs to EXTRA_IMAGE_FEATURES in local.conf. For example:
+                add dbg-pkgs to EXTRA_IMAGE_FEATURES in local.conf. For example:
                 <literallayout class='monospaced'>
      EXTRA_IMAGE_FEATURES = "debug-tweaks tools-profile dbg-pkgs"
                 </literallayout>
@@ -462,7 +462,7 @@
                 The tracing and profiling infrastructure in Linux has become
                 unified in a way that allows us to use the same tool with a
                 completely different set of counters, not just the standard
-                hardware counters that traditionally tools have had to restrict
+                hardware counters that traditional tools have had to restrict
                 themselves to (of course the traditional tools can also make use
                 of the expanded possibilities now available to them, and in some
                 cases have, as mentioned previously).
@@ -828,7 +828,7 @@
             </para>
 
             <para>
-                Luckily, there is general-purpose way to handle such needs,
+                Luckily, there is a general-purpose way to handle such needs,
                 called 'programming languages'. Making programming languages
                 easily available to apply to such problems given the specific
                 format of data is called a 'programming language binding' for
@@ -842,7 +842,7 @@
                 idea.  One of the first projects to do this was IBM's DProbes
                 dpcc compiler, an ANSI C compiler which targeted a low-level
                 assembly language running on an in-kernel interpreter on the
-                target system.  This is exactly analagous to what Sun's DTrace
+                target system.  This is exactly analogous to what Sun's DTrace
                 did, except that DTrace invented its own language for the purpose.
                 Systemtap, heavily inspired by DTrace, also created its own
                 one-off language, but rather than running the product on an
@@ -925,9 +925,9 @@
                 </literallayout>
                 Each event handler function in the generated code is modified
                 to do this. For convenience, we define a common function called
-                inc_counts() that each handler calls; inc_counts simply tallies
+                inc_counts() that each handler calls; inc_counts() simply tallies
                 a count for each event using the 'counts' hash, which is a
-                specialized has function that does Perl-like autovivification, a
+                specialized hash function that does Perl-like autovivification, a
                 capability that's extremely useful for kinds of multi-level
                 aggregation commonly used in processing traces (see perf's
                 documentation on the Python language binding for details):
@@ -1275,7 +1275,7 @@
             </para>
 
             <informalexample>
-                <emphasis>Tying it Together:</emphasis> The trace events subsystem accomodate static
+                <emphasis>Tying it Together:</emphasis> The trace events subsystem accommodate static
                 and dynamic tracepoints in exactly the same way - there's no
                 difference as far as the infrastructure is concerned.  See the
                 ftrace section for more details on the trace event subsystem.
@@ -1377,7 +1377,7 @@
             the /tracing directory of the mounted debugfs filesystem
             (Yocto follows the standard convention and mounts it
             at /sys/kernel/debug). Here's a listing of all the files
-            found in /sys/kernel/debug/tracing on a Yocto system.:
+            found in /sys/kernel/debug/tracing on a Yocto system:
             <literallayout class='monospaced'>
      root@sugarbay:/sys/kernel/debug/tracing# ls
      README                      kprobe_events               trace
@@ -1634,7 +1634,7 @@
             Also notice that there are various annotations on the left
             hand side of the display. For example if the total time it
             took for a given function to execute is above a certain
-            threshold, and exclamation point or plus sign appears on the
+            threshold, an exclamation point or plus sign appears on the
             left hand side. Please see the ftrace documentation for
             details on all these fields.
         </para>
@@ -1842,7 +1842,7 @@
             </literallayout>
             You can enable any number of events or complete subsystems
             (by using the 'enable' file in the subsystem directory) and
-            get am arbitrarily fine-grained idea of what's going on in the
+            get an arbitrarily fine-grained idea of what's going on in the
             system by enabling as many of the appropriate tracepoints
             as applicable.
         </para>
@@ -1878,14 +1878,14 @@
             in /sys/kernel/debug/tracing, allowing users to specify
             specific particular events within the
             /sys/kernel/debug/tracing/events/ subdirectory and to collect
-            traces and avoiding having to deal with those details directly.
+            traces and avoid having to deal with those details directly.
         </para>
 
         <para>
             As yet another layer on top of that, kernelshark provides a GUI
             that allows users to start and stop traces and specify sets
             of events using an intuitive interface, and view the
-            output as both trace events and as a per-cpu graphical
+            output as both trace events and as a per-CPU graphical
             display. It directly uses 'trace-cmd' as the plumbing
             that accomplishes all that underneath the covers (and
             actually displays the trace-cmd command it uses, as we'll see).
@@ -1896,13 +1896,13 @@
             <literallayout class='monospaced'>
      root@sugarbay:~# kernelshark
             </literallayout>
-            The bring up the 'Capture' dialog by choosing from the
+            Then bring up the 'Capture' dialog by choosing from the
             kernelshark menu:
             <literallayout class='monospaced'>
      Capture | Record
             </literallayout>
             That will display the following dialog, which allows you to
-            choose on or more events (or even one or more complete
+            choose one or more events (or even one or more complete
             subsystems) to trace:
         </para>
 
@@ -1911,7 +1911,7 @@
         </para>
 
         <para>
-            Note that these are exactly the same set of events described
+            Note that these are exactly the same sets of events described
             in the previous trace events subsystem section, and in fact
             is where trace-cmd gets them for kernelshark.
         </para>
@@ -1980,13 +1980,15 @@
             <literallayout class='monospaced'>
      Documentation/trace/events.txt
             </literallayout>
-            There are a nice series of articles on using
+            There is a nice series of articles on using
             ftrace and trace-cmd at LWN:
             <itemizedlist>
                 <listitem><para><ulink url='http://lwn.net/Articles/365835/'>Debugging the kernel using Ftrace - part 1</ulink>
                     </para></listitem>
                 <listitem><para><ulink url='http://lwn.net/Articles/366796/'>Debugging the kernel using Ftrace - part 2</ulink>
                     </para></listitem>
+                <listitem><para><ulink url='http://lwn.net/Articles/370423/'>Secrets of the Ftrace function tracer</ulink>
+                    </para></listitem>
                 <listitem><para><ulink url='https://lwn.net/Articles/410200/'>trace-cmd: A front-end for Ftrace</ulink>
                     </para></listitem>
             </itemizedlist>
@@ -2022,7 +2024,7 @@
         <ulink url='http://sourceware.org/systemtap/tutorial/'>SystemTap tutorial</ulink>
         simply prints a line every time any process on the system open()s
         a file. For each line, it prints the executable name of the
-        program that opened the file, along with its pid, and the name
+        program that opened the file, along with its PID, and the name
         of the file it opened (or tried to open), which it extracts
         from the open syscall's argstr.
         <literallayout class='monospaced'>
@@ -2096,6 +2098,15 @@
             booted. The 'crosstap' script provides details on how
             to do this if you run the script on the host without having
             done a build:
+            <note>
+                SystemTap, which uses 'crosstap', assumes you can establish an
+                ssh connection to the remote target.
+                Please refer to the crosstap wiki page for details on verifying
+                ssh connections at
+                <ulink url='https://wiki.yoctoproject.org/wiki/Tracing_and_Profiling#systemtap'></ulink>.
+                Also, the ability to ssh into the target system is not enabled
+                by default in *-minimal images.
+            </note>
             <literallayout class='monospaced'>
      $ crosstap root@192.168.1.88 trace_open.stp
 
@@ -2122,9 +2133,6 @@
             the EXTRA_IMAGE_FEATURES variable ]
           $ bitbake core-image-sato
 
-      [ NOTE that 'crosstap' needs to be able to ssh into the target
-        system, which isn't enabled by default in -minimal images. ]
-
      Once you've build the image on the host system, you're ready to
      boot it (or the equivalent pre-built image) and use 'crosstap'
      to probe it (you need to source the environment as usual first):
@@ -2195,7 +2203,7 @@
         <para>
             If everything worked as planned, you should see something
             like this (enter the password when prompted, or press enter
-            if its set up to use no password):
+            if it's set up to use no password):
             <literallayout class='monospaced'>
      $ crosstap root@192.168.7.2 trace_open.stp
      root@192.168.7.2's password:
@@ -2240,7 +2248,7 @@
         </para>
 
         <para>
-            For the the section that deals with oprofile from the command-line,
+            For the section that deals with running oprofile from the command-line,
             we assume you've ssh'ed to the host and will be running
             oprofile on the target.
         </para>
@@ -2260,7 +2268,7 @@
             Oprofile as configured in Yocto is a system-wide profiler
             (i.e. the version in Yocto doesn't yet make use of the
             perf_events interface which would allow it to profile
-            specific processes and workloads). It's relies on hardware
+            specific processes and workloads). It relies on hardware
             counter support in the hardware (but can fall back to a
             timer-based mode), which means that it doesn't take
             advantage of tracepoints or other event sources for example.
@@ -2281,8 +2289,8 @@
         <para>
             The oprofile daemon should already be running, but before
             you start profiling, you may need to change some settings
-            and some of these settings may require the daemon not
-            be running. One of these settings is the path the the
+            and some of these settings may require the daemon to not
+            be running. One of these settings is the path to the
             vmlinux file, which you'll want to set using the --vmlinux
             option if you want the kernel profiled:
             <literallayout class='monospaced'>
@@ -2313,7 +2321,7 @@
      Using log file /var/lib/oprofile/samples/oprofiled.log
      Daemon started.
             </literallayout>
-            If we get the status again we now see our updated settings:
+            If we check the status again we now see our updated settings:
             <literallayout class='monospaced'>
      root@crownbay:~# opcontrol --status
      Daemon paused: pid 1649
@@ -2322,7 +2330,7 @@
      Image filter: none
      Call-graph depth: 6
             </literallayout>
-            We're now in a position to run a profile. For that we used
+            We're now in a position to run a profile. For that we use
             'opcontrol --start':
             <literallayout class='monospaced'>
      root@crownbay:~# opcontrol --start
@@ -2334,10 +2342,10 @@
      Connecting to downloads.yoctoproject.org (140.211.169.59:80)
      linux-2.6.19.2.tar.b 100% |*******************************| 41727k  0:00:00 ETA
             </literallayout>
-            To stop the profile we use 'opcontrol --shudown', which not
+            To stop the profile we use 'opcontrol --shutdown', which not
             only stops the profile but shuts down the daemon as well:
             <literallayout class='monospaced'>
-     root@crownbay:~# opcontrol --start
+     root@crownbay:~# opcontrol --shutdown
      Stopping profiling.
      Killing daemon.
             </literallayout>
@@ -2896,7 +2904,7 @@
 
         <para>
             Once you've applied the above commits and built and booted your
-            image (you need to build the core-image-sato-sdk image or the
+            image (you need to build the core-image-sato-sdk image or use one of the
             other methods described in the General Setup section), you're
             ready to start tracing.
         </para>
@@ -2905,7 +2913,7 @@
             <title>Collecting and viewing a trace on the target (inside a shell)</title>
 
             <para>
-                First, from the target, ssh to the target:
+                First, from the host, ssh to the target:
                 <literallayout class='monospaced'>
      $ ssh -l root 192.168.1.47
      The authenticity of host '192.168.1.47 (192.168.1.47)' can't be established.
@@ -3006,7 +3014,7 @@
             <title>Collecting and viewing a userspace trace on the target (inside a shell)</title>
 
             <para>
-                For lttng userspace tracing, you need to have a properly
+                For LTTng userspace tracing, you need to have a properly
                 instrumented userspace program. For this example, we'll use
                 the 'hello' test program generated by the lttng-ust build.
             </para>
@@ -3028,7 +3036,7 @@
             </para>
 
             <para>
-                First, from the target, ssh to the target:
+                First, from the host, ssh to the target:
                 <literallayout class='monospaced'>
      $ ssh -l root 192.168.1.47
      The authenticity of host '192.168.1.47 (192.168.1.47)' can't be established.
@@ -3250,15 +3258,25 @@
         <title>Documentation</title>
 
         <para>
-            There doesn't seem to be any current documentation covering
-            LTTng 2.0, but maybe that's because the project is in transition.
-            The LTTng 2.0 website, however, is here:
-            <ulink url='http://lttng.org/lttng2.0'>LTTng Project</ulink>
+            You can find the primary LTTng Documentation on the
+            <ulink url='https://lttng.org/docs/'>LTTng Documentation</ulink>
+            site.
+            The documentation on this site is appropriate for intermediate to
+            advanced software developers who are working in a Linux environment
+            and are interested in efficient software tracing.
         </para>
 
         <para>
-            You can access extensive help information on how to use the
-            LTTng plug-in to search and analyze captured traces via the
+            For information on LTTng in general, visit the
+            <ulink url='http://lttng.org/lttng2.0'>LTTng Project</ulink>
+            site.
+            You can find a "Getting Started" link on this site that takes
+            you to an LTTng Quick Start.
+        </para>
+
+        <para>
+            Finally, you can access extensive help information on how to use
+            the LTTng plug-in to search and analyze captured traces via the
             Eclipse help system:
             <literallayout class='monospaced'>
      Help | Help Contents | LTTng Plug-in User Guide
@@ -3594,7 +3612,7 @@
                 It's also possible to trace block I/O using only
                 <link linkend='the-trace-events-subsystem'>trace events subsystem</link>,
                 which can be useful for casual tracing
-                if you don't want bother dealing with the userspace tools.
+                if you don't want to bother dealing with the userspace tools.
             </para>
 
             <para>

documentation/profile-manual/profile-manual.xml

@@ -41,6 +41,26 @@
                 <date>October 2013</date>
                 <revremark>Released with the Yocto Project 1.5 Release.</revremark>
             </revision>
+            <revision>
+                <revnumber>1.5.1</revnumber>
+                <date>January 2014</date>
+                <revremark>Released with the Yocto Project 1.5.1 Release.</revremark>
+            </revision>
+            <revision>
+                <revnumber>1.5.2</revnumber>
+                <date>May 2014</date>
+                <revremark>Released with the Yocto Project 1.5.2 Release.</revremark>
+            </revision>
+            <revision>
+                <revnumber>1.5.3</revnumber>
+                <date>July 2014</date>
+                <revremark>Released with the Yocto Project 1.5.3 Release.</revremark>
+            </revision>
+            <revision>
+                <revnumber>1.5.4</revnumber>
+                <date>December 2014</date>
+                <revremark>Released with the Yocto Project 1.5.4 Release.</revremark>
+            </revision>
         </revhistory>
 
     <copyright>
@@ -57,11 +77,10 @@
       </para>
 
       <note>
-          Due to production processes, there could be differences between the Yocto Project
-          documentation bundled in the release tarball and the
-          <ulink url='&YOCTO_DOCS_PROF_URL;'>Yocto Project Tracing and Profiling Manual</ulink> on
-          the <ulink url='&YOCTO_HOME_URL;'>Yocto Project</ulink> website.
-          For the latest version of this manual, see the manual on the website.
+          For the latest version of this manual associated with this
+          Yocto Project release, see the
+          <ulink url='&YOCTO_DOCS_PROF_URL;'>Yocto Project Profiling and Tracing Manual</ulink>
+          from the Yocto Project website.
       </note>
     </legalnotice>
 

documentation/ref-manual/closer-look.xml

@@ -267,7 +267,7 @@
 
         <para>
             The previous section described the user configurations that
-            define the BitBake's global behavior.
+            define BitBake's global behavior.
             This section takes a closer look at the layers the build system
             uses to further control the build.
             These layers provide Metadata for the software, machine, and
@@ -363,7 +363,7 @@
                 for what you typically find in the distribution layer:
                 <itemizedlist>
                     <listitem><para><emphasis>classes:</emphasis>
-                        Class files (<filename>.bbclass</filename>) holds
+                        Class files (<filename>.bbclass</filename>) hold
                         common functionality that can be shared among
                         recipes in the distribution.
                         When your recipes inherit a class, they take on the
@@ -381,7 +381,7 @@
                     <listitem><para><emphasis>recipes-*:</emphasis>
                         Recipes and append files that affect common
                         functionality across the distribution.
-                        This area could include recipes and append files to
+                        This area could include recipes and append files
                         to add distribution-specific configuration,
                         initialization scripts, custom image recipes,
                         and so forth.</para></listitem>
@@ -421,7 +421,7 @@
                 Metadata can exist for multiple formfactors, graphics
                 support systems, and so forth.
                 <note>
-                    While the figure shows several <filename>recipe-*</filename>
+                    While the figure shows several <filename>recipes-*</filename>
                     directories, not all these directories appear in all
                     BSP layers.
                 </note>
@@ -487,7 +487,7 @@
 
         <para>
             Another area that plays a significant role in where source files
-            comes from is pointed to by the
+            come from is pointed to by the
             <link linkend='var-DL_DIR'><filename>DL_DIR</filename></link>
             variable.
             This area is a cache that can hold previously downloaded source.
@@ -546,7 +546,7 @@
                 The canonical method through which to include a local project
                 is to use the
                 <link linkend='ref-classes-externalsrc'><filename>externalsrc.bbclass</filename></link>
-                class to include local project.
+                class to include that local project.
                 You use either the <filename>local.conf</filename> or a
                 recipe's append file to override or set the
                 recipe to point to the local directory on your disk to pull
@@ -693,7 +693,7 @@
             <para>
                 The <filename>do_fetch</filename> and
                 <filename>do_unpack</filename> tasks fetch the source files
-                and unpack them into a working directory.
+                and unpack them into the work directory.
                 By default, everything is accomplished in the
                 <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>,
                 which has a defined structure.
@@ -704,11 +704,11 @@
             </para>
 
             <para>
-                Unpacked source source files are pointed to by the
+                Unpacked source files are pointed to by the
                 <link linkend='var-S'><filename>S</filename></link> variable.
                 Each recipe has an area in the Build Directory where the
                 unpacked source code resides.
-                The name of directory for any given recipe is defined from
+                The name of that directory for any given recipe is defined from
                 several different variables.
                 You can see the variables that define these directories
                 by looking at the figure:
@@ -809,7 +809,7 @@
                         variable.
                         For information on how this variable works within
                         that class, see the
-                        <filename>meta/classes/autotools.bbclass</filename>.
+                        <filename>meta/classes/autotools.bbclass</filename> file.
                         </para></listitem>
                     <listitem><para><emphasis><filename>do_compile</filename>:</emphasis>
                         Once a configuration task has been satisfied, BitBake
@@ -818,8 +818,8 @@
                         Compilation occurs in the directory pointed to by the
                         <link linkend='var-B'><filename>B</filename></link>
                         variable.
-                        Realize that the <filename>B</filename> directory, by
-                        default, is the same as the
+                        Realize that the <filename>B</filename> directory is, by
+                        default, the same as the
                         <link linkend='var-S'><filename>S</filename></link>
                         directory.</para></listitem>
                     <listitem><para><emphasis><filename>do_install</filename>:</emphasis>
@@ -948,7 +948,7 @@
 
             <para>
                 During image generation, the build system attempts to run
-                all post installation scripts.
+                all post-installation scripts.
                 Any that fail to run on the build host are run on the
                 target when the target system is first booted.
                 If you are using a
@@ -1052,7 +1052,7 @@
         <para>
             The images produced by the OpenEmbedded build system
             are compressed forms of the
-            root filesystems that are ready to boot on a target device.
+            root filesystem that are ready to boot on a target device.
             You can see from the
             <link linkend='general-yocto-environment-figure'>general Yocto Project Development Environment figure</link>
             that BitBake output in part consists of images.
@@ -1062,14 +1062,14 @@
 
         <para>
             For a list of example images that the Yocto Project provides,
-            the
+            see the
             "<link linkend='ref-images'>Images</link>" chapter.
         </para>
 
         <para>
             Images are written out to the
             <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
-            inside the <filename>deploy/images/&lt;machine&gt;/</filename>
+            inside the <filename>tmp/deploy/images/&lt;machine&gt;/</filename>
             folder as shown in the figure.
             This folder contains any files expected to be loaded on the
             target device.

documentation/ref-manual/faq.xml

@@ -31,31 +31,19 @@
     <qandaentry>
         <question>
             <para>
-                I only have Python 2.4 or 2.5 but BitBake requires Python 2.6 or 2.7.
+                My development system does not have Python 2.7.3 or greater,
+                which the Yocto Project requires.
                 Can I still use the Yocto Project?
             </para>
         </question>
         <answer>
             <para>
-                You can use a stand-alone tarball to provide Python 2.6.
-                You can find pre-built 32 and 64-bit versions of Python 2.6 at the following locations:
-                <itemizedlist>
-                    <listitem><para><ulink url='&YOCTO_PYTHON-i686_DL_URL;'>32-bit tarball</ulink></para></listitem>
-                    <listitem><para><ulink url='&YOCTO_PYTHON-x86_64_DL_URL;'>64-bit tarball</ulink></para></listitem>
-                </itemizedlist>
-            </para>
-            <para>
-                These tarballs are self-contained with all required libraries and should work
-                on most Linux systems.
-                To use the tarballs extract them into the root
-                directory and run the appropriate command:
-                <literallayout class='monospaced'>
-     $ export PATH=/opt/poky/sysroots/i586-pokysdk-linux/usr/bin/:$PATH
-     $ export PATH=/opt/poky/sysroots/x86_64-pokysdk-linux/usr/bin/:$PATH
-                </literallayout>
-            </para>
-            <para>
-                Once you run the command, BitBake uses Python 2.6.
+                You can get the required tools on your host development
+                system a couple different ways (i.e. building a tarball or
+                downloading a tarball).
+                See the
+                "<link linkend='required-git-tar-and-python-versions'>Required Git, tar, and Python Versions</link>"
+                section for steps on how to update your build tools.
             </para>
         </answer>
     </qandaentry>
@@ -211,7 +199,7 @@
         </answer>
     </qandaentry>
 
-    <qandaentry>
+<!--    <qandaentry>
         <question>
             <para>
                 How do I make the Yocto Project work in RHEL/CentOS?
@@ -258,7 +246,7 @@
                 Wiki page.</para>
             </note>
         </answer>
-    </qandaentry>
+    </qandaentry> -->
 
     <qandaentry>
         <question>
@@ -682,7 +670,7 @@
             <para>
                 Yes - you can easily do this.
                 When you use BitBake to build an image, all the build output
-                goes into the directory created when you run the 
+                goes into the directory created when you run the
                 build environment setup script (i.e.
                 <link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link>
                 or

documentation/ref-manual/introduction.xml

@@ -121,11 +121,6 @@
                 </para>
 
                 <para>
-                    Refer to
-                    <ulink url='&OE_HOME_URL;/index.php?title=OEandYourDistro'>OE and Your Distro</ulink> and
-                    <ulink url='&OE_HOME_URL;/index.php?title=Required_software'>Required Software</ulink>
-                    for information for information about dependencies and
-                    requirements.
                     If you encounter problems, please go to
                     <ulink url='&YOCTO_BUGZILLA_URL;'>Yocto Project Bugzilla</ulink>
                     and submit a bug.
@@ -251,11 +246,11 @@
         </section>
 
         <section id='opensuse-packages'>
-            <title>OpenSUSE Packages</title>
+            <title>openSUSE Packages</title>
 
             <para>
                 The following list shows the required packages by function
-                given a supported OpenSUSE Linux distribution:
+                given a supported openSUSE Linux distribution:
                 <itemizedlist>
                     <listitem><para><emphasis>Essentials:</emphasis>
                         Packages needed to build an image for a headless
@@ -290,11 +285,17 @@
             <para>
                 The following list shows the required packages by function
                 given a supported CentOS Linux distribution:
-                <note>Depending on the CentOS version you are using, other requirements
-                    and dependencies might exist.
-                    For details, you should look at the CentOS sections on the
-                    <ulink url='https://wiki.yoctoproject.org/wiki/Poky/GettingStarted/Dependencies'>Poky/GettingStarted/Dependencies</ulink>
-                    wiki page.
+                <note>
+                    For CentOS 6.x, some of the versions of the components
+                    provided by the distribution are too old (e.g. Git, Python,
+                    and tar).
+                    It is recommended that you install the buildtools in order
+                    to provide versions that will work with the OpenEmbedded
+                    build system.
+                    For information on how to install the buildtools tarball,
+                    see the
+                    "<link linkend='required-git-tar-and-python-versions'>Required Git, Tar, and Python Versions</link>"
+                    section.
                 </note>
                 <itemizedlist>
                     <listitem><para><emphasis>Essentials:</emphasis>
@@ -346,8 +347,8 @@
             you can resolve this by either downloading a pre-built tarball
             containing these tools, or building such a tarball on another
             system.
-            Regardless of the method, once you have the tarball you simply
-            install it somewhere on you system, such as a directory in your
+            Regardless of the method, once you have the tarball, you simply
+            install it somewhere on your system, such as a directory in your
             home directory, and then source the environment script provided,
             which adds the tools into <filename>PATH</filename> and sets
             any other environment variables required to run the tools.
@@ -358,7 +359,7 @@
         <para>
             If downloading a pre-built tarball, locate the
             <filename>*.sh</filename> at
-            <ulink url='&YOCTO_DL_URL;/releases/yocto/yocto-1.5/buildtools/'></ulink>.
+            <ulink url='&YOCTO_DL_URL;/releases/yocto/yocto-&DISTRO;/buildtools/'></ulink>.
         </para>
 
         <para>
@@ -371,7 +372,7 @@
                 variable determines whether you build tools for a 32-bit
                 or 64-bit system.
             </note>
-            Once the build completes, you can find the file that installs the
+            Once the build completes, you can find the file that installs
             the tools in the <filename>tmp/deploy/sdk</filename> subdirectory
             of the
             <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>.

documentation/ref-manual/migration.xml

@@ -34,7 +34,7 @@
             <para>
                 The shared state cache (sstate-cache), as pointed to by
                 <link linkend='var-SSTATE_DIR'><filename>SSTATE_DIR</filename></link>, by default
-                now has two-character subdirectories to prevent issues rising
+                now has two-character subdirectories to prevent issues arising
                 from too many files in the same directory.
                 Also, native sstate-cache packages will go into a subdirectory named using
                 the distro ID string.
@@ -157,7 +157,7 @@
                 <link linkend='var-LIC_FILES_CHKSUM'><filename>LIC_FILES_CHKSUM</filename></link>,
                 and so forth.
                 See the
-                "<link linkend='ref-classes-packagegroup'>Package Groups - packagegroup.bbclass</link>"
+                "<link linkend='ref-classes-packagegroup'><filename>packagegroup.bbclass</filename></link>"
                 section for further details.
             </para>
         </section>
@@ -755,7 +755,7 @@
                     <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
                     rather than
                     <link linkend='var-TMPDIR'><filename>TMPDIR</filename></link>.
-                    Doing so makes it a easier to delete
+                    Doing so makes it easier to delete
                     <filename>TMPDIR</filename> and preserve the build history.
                     Additionally, data for produced SDKs is now split by
                     <link linkend='var-IMAGE_NAME'><filename>IMAGE_NAME</filename></link>.
@@ -829,10 +829,10 @@
     </section>
 
     <section id='migration-1.5-run'>
-        <title><filename>/run</filename></title>
+        <title><filename>run</filename></title>
 
         <para>
-            The <filename>/run</filename> directory from the Filesystem
+            The <filename>run</filename> directory from the Filesystem
             Hierarchy Standard 3.0 has been introduced.
             You can find some of the implications for this change
             <ulink url='http://cgit.openembedded.org/openembedded-core/commit/?id=0e326280a15b0f2c4ef2ef4ec441f63f55b75873'>here</ulink>.
@@ -886,7 +886,7 @@
 
         <para>
             For more information, see the
-            "<link linkend='ref-classes-packagegroup'>Package Groups - <filename>packagegroup.bbclass</filename></link>"
+            "<link linkend='ref-classes-packagegroup'><filename>packagegroup.bbclass</filename></link>"
             section.
         </para>
     </section>
@@ -1033,7 +1033,7 @@
                     </para></listitem>
                 <listitem><para>
                     <filename>base-files</filename>: Remove the unnecessary
-                    <filename>/media/xxx</filename> directories.
+                    <filename>media/xxx</filename> directories.
                     </para></listitem>
                 <listitem><para>
                     <filename>alsa-state</filename>: Provide an empty

documentation/ref-manual/ref-bitbake.xml

@@ -222,7 +222,7 @@
         <para>
             As each task completes, a timestamp is written to the directory specified by the
             <filename><link linkend='var-STAMP'>STAMP</link></filename> variable.
-            On subsequent runs, BitBake looks within the <filename>/build/tmp/stamps</filename>
+            On subsequent runs, BitBake looks within the <filename>build/tmp/stamps</filename>
             directory and does not rerun
             tasks that are already completed unless a timestamp is found to be invalid.
             Currently, invalid timestamps are only considered on a per

documentation/ref-manual/ref-features.xml

@@ -3,7 +3,7 @@
 [<!ENTITY % poky SYSTEM "../poky.ent"> %poky; ] >
 
 <chapter id='ref-features'>
-    <title>Reference: Features</title>
+    <title>Features</title>
 
     <para>
         This chapter provides a reference of shipped machine and distro features
@@ -38,23 +38,34 @@
         Here is an example that discovers the recipes whose build is potentially
         changed based on a given feature:
         <literallayout class='monospaced'>
-     $ cd $HOME/poky
+     $ cd poky
      $ git grep 'contains.*MACHINE_FEATURES.*&lt;feature&gt;'
         </literallayout>
     </para>
 
     <section id='ref-features-distro'>
-        <title>Distro</title>
+        <title>Distro Features</title>
 
         <para>
             The items below are features you can use with
-            <link linkend='var-DISTRO_FEATURES'><filename>DISTRO_FEATURES</filename></link>.
-            Features do not have a one-to-one correspondence to packages, and they can
-            go beyond simply controlling the installation of a package or packages.
-            Sometimes a feature can influence how certain recipes are built.
-            For example, a feature might determine whether a particular configure option
-            is specified within <filename>do_configure</filename> for a particular
-            recipe.
+            <link linkend='var-DISTRO_FEATURES'><filename>DISTRO_FEATURES</filename></link>
+            to enable features across your distribution.
+            Features do not have a one-to-one correspondence to packages,
+            and they can go beyond simply controlling the installation of a
+            package or packages.
+            In most cases, the presence or absence of a feature translates to
+            the appropriate option supplied to the configure script during
+            <filename>do_configure</filename> for the recipes that optionally
+            support the feature.
+        </para>
+
+        <para>
+            Some distro features are also machine features.
+            These select features make sense to be controlled both at
+            the machine and distribution configuration level.
+            See the
+            <ulink url='&YOCTO_DOCS_REF_URL;#var-COMBINED_FEATURES'><filename>COMBINED_FEATURES</filename></ulink>
+            variable for more information.
         </para>
 
         <para>
@@ -67,6 +78,9 @@
                     bluetooth support (integrated BT only).</para></listitem>
                 <listitem><para><emphasis>cramfs:</emphasis> Include CramFS
                     support.</para></listitem>
+                <listitem><para><emphasis>directfb:</emphasis>
+                    Include DirectFB support.
+                    </para></listitem>
                 <listitem><para><emphasis>ext2:</emphasis> Include tools for
                     supporting for devices with internal HDD/Microdrive for
                     storing files (instead of Flash only devices).
@@ -75,7 +89,7 @@
                     support.</para></listitem>
                 <listitem><para><emphasis>ipv6:</emphasis> Include IPv6 support.
                     </para></listitem>
-                <listitem><para><emphasis>irda:</emphasis> Include Irda support.
+                <listitem><para><emphasis>irda:</emphasis> Include IrDA support.
                     </para></listitem>
                 <listitem><para><emphasis>keyboard:</emphasis> Include keyboard
                     support (e.g. keymaps will be loaded during boot).
@@ -120,7 +134,7 @@
     </section>
 
     <section id='ref-features-machine'>
-        <title>Machine</title>
+        <title>Machine Features</title>
 
         <para>
             The items below are features you can use with
@@ -146,7 +160,7 @@
                     </para></listitem>
                 <listitem><para><emphasis>ext2:</emphasis> Hardware HDD or Microdrive
                     </para></listitem>
-                <listitem><para><emphasis>irda:</emphasis> Hardware has Irda support
+                <listitem><para><emphasis>irda:</emphasis> Hardware has IrDA support
                     </para></listitem>
                 <listitem><para><emphasis>keyboard:</emphasis> Hardware has a keyboard
                     </para></listitem>
@@ -171,7 +185,7 @@
     </section>
 
     <section id='ref-features-image'>
-        <title>Images</title>
+        <title>Image Features</title>
 
         <para>
             The contents of images generated by the OpenEmbedded build system can be controlled by the

documentation/ref-manual/ref-images.xml

@@ -90,14 +90,18 @@
         <listitem><para><emphasis><filename>core-image-clutter</filename>:</emphasis>
             An image with support for the Open GL-based toolkit Clutter, which enables development of
             rich and animated graphical user interfaces.</para></listitem>
-        <listitem><para><emphasis><filename>core-image-gtk-directfb</filename>:</emphasis>
-            An image that uses <filename>gtk+</filename> over <filename>directfb</filename>
-            instead of X11.
-            In order to build, this image requires specific distro configuration that enables
-            <filename>gtk</filename> over <filename>directfb</filename>.</para></listitem>
+        <listitem><para><emphasis><filename>core-image-directfb</filename>:</emphasis>
+            An image that uses <filename>directfb</filename> instead of X11.
+            </para></listitem>
         <listitem><para><emphasis><filename>core-image-x11</filename>:</emphasis>
             A very basic X11 image with a terminal.
             </para></listitem>
+        <listitem><para><emphasis><filename>core-image-weston</filename>:</emphasis>
+            An image that provides the Wayland protocol libraries and the
+            reference Weston compositor.
+            For more information, see the
+            "<link linkend='wayland'>Wayland</link>" section.
+            </para></listitem>
         <listitem><para><emphasis><filename>qt4e-demo-image</filename>:</emphasis>
             An image that launches into the demo application for the embedded
             (not based on X11) version of Qt.</para></listitem>

documentation/ref-manual/ref-manual.xml

@@ -72,6 +72,26 @@
                 <date>October 2013</date>
                 <revremark>Released with the Yocto Project 1.5 Release.</revremark>
             </revision>
+            <revision>
+                <revnumber>1.5.1</revnumber>
+                <date>January 2014</date>
+                <revremark>Released with the Yocto Project 1.5.1 Release.</revremark>
+            </revision>
+            <revision>
+                <revnumber>1.5.2</revnumber>
+                <date>May 2014</date>
+                <revremark>Released with the Yocto Project 1.5.2 Release.</revremark>
+            </revision>
+            <revision>
+                <revnumber>1.5.3</revnumber>
+                <date>July 2014</date>
+                <revremark>Released with the Yocto Project 1.5.3 Release.</revremark>
+            </revision>
+            <revision>
+                <revnumber>1.5.4</revnumber>
+                <date>December 2014</date>
+                <revremark>Released with the Yocto Project 1.5.4 Release.</revremark>
+            </revision>
         </revhistory>
 
     <copyright>
@@ -85,11 +105,10 @@
         the terms of the <ulink type="http" url="http://creativecommons.org/licenses/by-sa/2.0/uk/">Creative Commons Attribution-Share Alike 2.0 UK: England &amp; Wales</ulink> as published by Creative Commons.
       </para>
       <note>
-          Due to production processes, there could be differences between the Yocto Project
-          documentation bundled in the release tarball and the
-          <ulink url='&YOCTO_DOCS_REF_URL;'>Yocto Project Reference Manual</ulink> on
-          the <ulink url='&YOCTO_HOME_URL;'>Yocto Project</ulink> website.
-          For the latest version of this manual, see the manual on the website.
+          For the latest version of this manual associated with this
+          Yocto Project release, see the
+          <ulink url='&YOCTO_DOCS_REF_URL;'>Yocto Project Reference Manual</ulink>
+          from the Yocto Project website.
       </note>
     </legalnotice>
 

documentation/ref-manual/ref-structure.xml

@@ -39,23 +39,27 @@
 
         <para>
             This directory includes a copy of BitBake for ease of use.
-            The copy usually matches the current stable BitBake release from the BitBake project.
+            The copy usually matches the current stable BitBake release from
+            the BitBake project.
             BitBake, a
             <ulink url='&YOCTO_DOCS_DEV_URL;#metadata'>Metadata</ulink>
-            interpreter, reads the Yocto Project metadata and runs the tasks
+            interpreter, reads the Yocto Project Metadata and runs the tasks
             defined by that data.
-            Failures are usually from the metadata and not from BitBake itself.
+            Failures are usually from the Metadata and not from BitBake itself.
             Consequently, most users do not need to worry about BitBake.
         </para>
 
         <para>
-            When you run the <filename>bitbake</filename> command, the wrapper script in
-            <filename>scripts/</filename> is executed to run the main BitBake executable,
-            which resides in the <filename>bitbake/bin/</filename> directory.
-            Sourcing the <link linkend="structure-core-script"><filename>&OE_INIT_FILE;</filename></link>
-            script places the <filename>scripts</filename> and <filename>bitbake/bin</filename>
-            directories (in that order) into the shell's <filename>PATH</filename> environment
-            variable.
+            When you run the <filename>bitbake</filename> command, the
+            main BitBake executable, which resides in the
+            <filename>bitbake/bin/</filename> directory, starts.
+            Sourcing an environment setup script (e.g.
+            <link linkend="structure-core-script"><filename>&OE_INIT_FILE;</filename></link>
+            or
+            <link linkend="structure-memres-core-script"><filename>oe-init-build-env-memres</filename></link>)
+            places the <filename>scripts</filename> and
+            <filename>bitbake/bin</filename> directories (in that order) into
+            the shell's <filename>PATH</filename> environment variable.
         </para>
 
         <para>
@@ -74,7 +78,7 @@
             the source tree is combined with the output.
             The <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
             is created initially when you <filename>source</filename>
-            the OpenEmbedded build environment setup script 
+            the OpenEmbedded build environment setup script
             (i.e.
             <link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link>
             or
@@ -97,7 +101,7 @@
     </section>
 
     <section id='handbook'>
-        <title><filename>documentation</filename></title>
+        <title><filename>documentation/</filename></title>
 
         <para>
             This directory holds the source for the Yocto Project documentation
@@ -105,7 +109,7 @@
             versions of the manuals.
             Each manual is contained in a sub-folder.
             For example, the files for this manual reside in
-            <filename>ref-manual</filename>.
+            the <filename>ref-manual/</filename> directory.
         </para>
     </section>
 
@@ -175,9 +179,9 @@
         </para>
 
         <para>
-            The <filename>scripts</filename> directory has useful scripts that assist contributing
-            back to the Yocto Project, such as <filename>create_pull_request</filename> and
-            <filename>send_pull_request</filename>.
+            The <filename>scripts</filename> directory has useful scripts that assist in contributing
+            back to the Yocto Project, such as <filename>create-pull-request</filename> and
+            <filename>send-pull-request</filename>.
         </para>
     </section>
 
@@ -185,9 +189,9 @@
         <title><filename>&OE_INIT_FILE;</filename></title>
 
         <para>
-            This script is one of two scripts that set up the OpenEmbedded build 
+            This script is one of two scripts that set up the OpenEmbedded build
             environment.
-            For information on the other script, see the 
+            For information on the other script, see the
             "<link linkend='structure-memres-core-script'><filename>oe-init-build-env-memres</filename></link>"
             section.
         </para>
@@ -196,7 +200,7 @@
             Running this script with the <filename>source</filename> command in
             a shell makes changes to <filename>PATH</filename> and sets other
             core BitBake variables based on the current working directory.
-            You need to run an environment setup script before running BitBake 
+            You need to run an environment setup script before running BitBake
             commands.
             The script uses other scripts within the
             <filename>scripts</filename> directory to do the bulk of the work.
@@ -205,7 +209,8 @@
         <para>
             By default, running this script without a
             <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
-            argument creates the <filename>build</filename> directory.
+            argument creates the <filename>build</filename> directory
+            in your current working directory.
             If you provide a Build Directory argument when you
             <filename>source</filename> the script, you direct the OpenEmbedded
             build system to create a Build Directory of your choice.
@@ -231,11 +236,11 @@
         <title><filename>oe-init-build-env-memres</filename></title>
 
         <para>
-            This script is one of two scripts that set up the OpenEmbedded build 
-            environment.
-            Setting up the environment with this script uses a 
-            memory-resident BitBake.
-            For information on the other setup script, see the 
+            This script is one of two scripts that set up the OpenEmbedded
+            build environment.
+            Aside from setting up the environment, this script starts a
+            memory-resident BitBake server.
+            For information on the other setup script, see the
             "<link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link>"
             section.
         </para>
@@ -252,14 +257,14 @@
             Running this script with the <filename>source</filename> command in
             a shell makes changes to <filename>PATH</filename> and sets other
             core BitBake variables based on the current working directory.
-            One of these variables is the 
+            One of these variables is the
             <link linkend='var-BBSERVER'><filename>BBSERVER</filename></link>
-            variable, which allows the OpenEmbedded build system to locate 
+            variable, which allows the OpenEmbedded build system to locate
             the server that is running BitBake.
         </para>
 
         <para>
-            You need to run an environment setup script before running BitBake 
+            You need to run an environment setup script before using BitBake
             commands.
             Following is the script syntax:
             <literallayout class='monospaced'>
@@ -270,33 +275,34 @@
         </para>
 
         <para>
-            If you do not provide a port number with the script, the default
-            port "12345" is used.
+            If you do not provide a port number with the script, the
+            BitBake server at port "12345" is started.
         </para>
 
         <para>
             By default, running this script without a
             <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
-            argument creates the <filename>build</filename> directory.
+            argument creates a build directory named
+            <filename>build</filename>.
             If you provide a Build Directory argument when you
-            <filename>source</filename> the script, you direct the OpenEmbedded
-            build system to create a Build Directory of your choice.
-            For example, the following command uses the default port number
-            "12345" and creates a Build Directory named
+            <filename>source</filename> the script, the Build Directory is
+            created using that name.
+            For example, the following command starts the BitBake server using
+            the default port "12345" and creates a Build Directory named
             <filename>mybuilds</filename> that is outside of the
             <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink>:
             <literallayout class='monospaced'>
      $ source oe-init-build-env-memres ~/mybuilds
             </literallayout>
             <note>
-                The OpenEmbedded build system does not support file or 
+                The OpenEmbedded build system does not support file or
                 directory names that contain spaces.
-                If you attempt to run the 
+                If you attempt to run the
                 <filename>oe-init-build-env-memres</filename> script
-                from a Source Directory that contains spaces in either the 
-                filenames or directory names, the script returns an error 
+                from a Source Directory that contains spaces in either the
+                filenames or directory names, the script returns an error
                 indicating no such file or directory.
-                Be sure to use a Source Directory free of names containing 
+                Be sure to use a Source Directory free of names containing
                 spaces.
             </note>
         </para>
@@ -321,81 +327,72 @@
         By default, this directory is named <filename>build</filename>.
     </para>
 
-    <section id='structure-build-pseudodone'>
-        <title><filename>build/pseudodone</filename></title>
-
-        <para>
-            This tag file indicates that the initial pseudo binary was created.
-            The file is built the first time BitBake is invoked.
-        </para>
-    </section>
-
     <section id='structure-build-conf-local.conf'>
         <title><filename>build/conf/local.conf</filename></title>
 
         <para>
-            This configuration file contains all the local user configurations 
+            This configuration file contains all the local user configurations
             for your build environment.
-            The <filename>local.conf</filename> file contains documentation on 
+            The <filename>local.conf</filename> file contains documentation on
             the various configuration options.
-            Any variable set here overrides any variable set elsewhere within 
-            the environment unless that variable is hard-coded within a file 
+            Any variable set here overrides any variable set elsewhere within
+            the environment unless that variable is hard-coded within a file
             (e.g. by using '=' instead of '?=').
-            Some variables are hard-coded for various reasons but these 
+            Some variables are hard-coded for various reasons but these
             variables are relatively rare.
         </para>
 
         <para>
-            Edit this file to set the 
+            Edit this file to set the
             <filename><link linkend='var-MACHINE'>MACHINE</link></filename>
             for which you want to build, which package types you wish to use
             (<link linkend='var-PACKAGE_CLASSES'><filename>PACKAGE_CLASSES</filename></link>),
-            the location from which you want to downloaded files
+            the location from which you want to access downloaded files
             (<filename><link linkend='var-DL_DIR'>DL_DIR</link></filename>),
             and how you want your host machine to use resources
-            (<link linkend='var-BB_NUMBER_THREADS'><filename>BB_NUMBER_THREADS</filename></link> 
+            (<link linkend='var-BB_NUMBER_THREADS'><filename>BB_NUMBER_THREADS</filename></link>
             and
             <link linkend='var-PARALLEL_MAKE'><filename>PARALLEL_MAKE</filename></link>).
         </para>
 
         <para>
-            If <filename>local.conf</filename> is not present when you 
-            start the build, the OpenEmbedded build system creates it from 
+            If <filename>local.conf</filename> is not present when you
+            start the build, the OpenEmbedded build system creates it from
             <filename>local.conf.sample</filename> when
-            you <filename>source</filename> the top-level build environment 
+            you <filename>source</filename> the top-level build environment
             setup script (i.e.
             <link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link>
-            or 
+            or
             <link linkend='structure-memres-core-script'><filename>oe-init-build-env-memres</filename></link>).
         </para>
 
         <para>
-            The source <filename>local.conf.sample</filename> file used 
+            The source <filename>local.conf.sample</filename> file used
             depends on the <filename>$TEMPLATECONF</filename> script variable,
-            which defaults to <filename>/meta-yocto/conf</filename>
-            when you are building from the Yocto Project development 
-            environment and defaults to <filename>/meta/conf</filename> when 
+            which defaults to <filename>meta-yocto/conf</filename>
+            when you are building from the Yocto Project development
+            environment and defaults to <filename>meta/conf</filename> when
             you are building from the OpenEmbedded Core environment.
-            Because the script variable points to the source of the 
-            <filename>local.conf.sample</filename> file, this implies that 
-            you can configure your build environment from any layer by setting     
-            the variable in the top-level build environment setup script as 
+            Because the script variable points to the source of the
+            <filename>local.conf.sample</filename> file, this implies that
+            you can configure your build environment from any layer by setting
+            the variable in the top-level build environment setup script as
             follows:
             <literallayout class='monospaced'>
      TEMPLATECONF=&lt;your_layer&gt;/conf
             </literallayout>
-            Once the build process gets the sample file, it uses 
-            <filename>sed</filename> to substitute final 
-            <filename>${</filename><link linkend='var-OEROOT'><filename>OEROOT</filename></link><filename>}</filename> 
+            Once the build process gets the sample file, it uses
+            <filename>sed</filename> to substitute final
+            <filename>${</filename><link linkend='var-OEROOT'><filename>OEROOT</filename></link><filename>}</filename>
             values for all <filename>##OEROOT##</filename> values.
             <note>
                 You can see how the <filename>TEMPLATECONF</filename> variable
-                is used by looking at the       
-                <filename>/scripts/oe-setup-builddir</filename> script in the 
+                is used by looking at the
+                <filename>scripts/oe-setup-builddir</filename> script in the
                 <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink>.
-                You can find the Yocto Project version of the 
-                <filename>local.conf.sample</filename> file in the 
-                <filename>/meta-yocto/conf</filename> directory.                
+                You can find the Yocto Project version of the
+                <filename>local.conf.sample</filename> file in the
+                <filename>meta-yocto/conf</filename> directory.
             </note>
         </para>
     </section>
@@ -408,48 +405,48 @@
             <ulink url='&YOCTO_DOCS_DEV_URL;#understanding-and-creating-layers'>layers</ulink>,
             which are directory trees, traversed (or walked) by BitBake.
             The <filename>bblayers.conf</filename> file uses the
-            <link linkend='var-BBLAYERS'><filename>BBLAYERS</filename></link> 
+            <link linkend='var-BBLAYERS'><filename>BBLAYERS</filename></link>
             variable to list the layers BitBake tries to find, and uses the
             <link linkend='var-BBLAYERS_NON_REMOVABLE'><filename>BBLAYERS_NON_REMOVABLE</filename></link>
             variable to list layers that must not be removed.
         </para>
 
         <para>
-            If <filename>bblayers.conf</filename> is not present when you 
-            start the build, the OpenEmbedded build system creates it from 
+            If <filename>bblayers.conf</filename> is not present when you
+            start the build, the OpenEmbedded build system creates it from
             <filename>bblayers.conf.sample</filename> when
-            you <filename>source</filename> the top-level build environment 
+            you <filename>source</filename> the top-level build environment
             setup script (i.e.
             <link linkend='structure-core-script'><filename>&OE_INIT_FILE;</filename></link>
-            or 
+            or
             <link linkend='structure-memres-core-script'><filename>oe-init-build-env-memres</filename></link>).
         </para>
 
         <para>
-            The source <filename>bblayers.conf.sample</filename> file used 
+            The source <filename>bblayers.conf.sample</filename> file used
             depends on the <filename>$TEMPLATECONF</filename> script variable,
-            which defaults to <filename>/meta-yocto/conf</filename>
-            when you are building from the Yocto Project development 
-            environment and defaults to <filename>/meta/conf</filename> when 
+            which defaults to <filename>meta-yocto/conf</filename>
+            when you are building from the Yocto Project development
+            environment and defaults to <filename>meta/conf</filename> when
             you are building from the OpenEmbedded Core environment.
-            Because the script variable points to the source of the 
-            <filename>bblayers.conf.sample</filename> file, this implies that 
+            Because the script variable points to the source of the
+            <filename>bblayers.conf.sample</filename> file, this implies that
             you can base your build from any layer by setting the variable in
             the top-level build environment setup script as follows:
             <literallayout class='monospaced'>
      TEMPLATECONF=&lt;your_layer&gt;/conf
             </literallayout>
-            Once the build process gets the sample file, it uses 
-            <filename>sed</filename> to substitute final 
-            <filename>${</filename><link linkend='var-OEROOT'><filename>OEROOT</filename></link><filename>}</filename> 
+            Once the build process gets the sample file, it uses
+            <filename>sed</filename> to substitute final
+            <filename>${</filename><link linkend='var-OEROOT'><filename>OEROOT</filename></link><filename>}</filename>
             values for all <filename>##OEROOT##</filename> values.
             <note>
                 You can see how the <filename>TEMPLATECONF</filename> variable
-                <filename>/scripts/oe-setup-builddir</filename> script in the 
+                <filename>scripts/oe-setup-builddir</filename> script in the
                 <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink>.
-                You can find the Yocto Project version of the 
-                <filename>bblayers.conf.sample</filename> file in the 
-                <filename>/meta-yocto/conf</filename> directory.                
+                You can find the Yocto Project version of the
+                <filename>bblayers.conf.sample</filename> file in the
+                <filename>meta-yocto/conf</filename> directory.
             </note>
         </para>
     </section>
@@ -491,7 +488,7 @@
         <title><filename>build/tmp/</filename></title>
 
         <para>
-            This directory receives all the OpenEmbedded build system's output.
+            This directory receives all of the OpenEmbedded build system's output.
             BitBake creates this directory if it does not exist.
             As a last resort, to clean up a build and start it from scratch (other than the downloads),
             you can remove everything in the <filename>tmp</filename> directory or get rid of the
@@ -555,6 +552,15 @@
         </para>
     </section>
 
+    <section id='structure-build-tmp-deploy-ipk'>
+        <title><filename>build/tmp/deploy/ipk/</filename></title>
+
+        <para>
+            This directory receives <filename>.ipk</filename> packages produced by
+            the build process.
+        </para>
+    </section>
+
     <section id='structure-build-tmp-deploy-licenses'>
         <title><filename>build/tmp/deploy/licenses/</filename></title>
 
@@ -601,14 +607,6 @@
         </para>
     </section>
 
-    <section id='structure-build-tmp-deploy-ipk'>
-        <title><filename>build/tmp/deploy/ipk/</filename></title>
-
-        <para>
-            This directory receives <filename>.ipk</filename> packages produced by
-            the build process.</para>
-    </section>
-
     <section id='structure-build-tmp-sysroots'>
         <title><filename>build/tmp/sysroots/</filename></title>
 
@@ -650,15 +648,6 @@
         </para>
     </section>
 
-    <section id='structure-build-tmp-pkgdata'>
-        <title><filename>build/tmp/pkgdata/</filename></title>
-
-        <para>
-            This directory contains intermediate packaging data that is used later in the packaging process.
-            For more information, see the "<link linkend='ref-classes-package'>Packaging - package*.bbclass</link>" section.
-        </para>
-    </section>
-
     <section id='structure-build-tmp-work'>
         <title><filename>build/tmp/work/</filename></title>
 
@@ -790,7 +779,7 @@
             This directory contains common license files and several text files
             used by the build system.
             The text files contain minimal device information and
-            lists of files and directories with knows permissions.
+            lists of files and directories with known permissions.
         </para>
     </section>
 

documentation/ref-manual/technical-details.xml

@@ -60,9 +60,10 @@
             and is responsible for parsing the
             <ulink url='&YOCTO_DOCS_DEV_URL;#metadata'>Metadata</ulink>,
             generating a list of tasks from it, and then executing those tasks.
-            To see a list of the options BitBake supports, use the following
-            help command:
+            To see a list of the options BitBake supports, use either of
+            the following commands:
             <literallayout class='monospaced'>
+     $ bitbake -h
      $ bitbake --help
             </literallayout>
         </para>
@@ -72,7 +73,7 @@
             <filename>packagename</filename> is the name of the package you want to build
             (referred to as the "target" in this manual).
             The target often equates to the first part of a <filename>.bb</filename> filename.
-            So, to run the <filename>matchbox-desktop_1.2.3.bb</filename> file, you
+            So, to process the <filename>matchbox-desktop_1.2.3.bb</filename> recipe file, you
             might type the following:
             <literallayout class='monospaced'>
      $ bitbake matchbox-desktop
@@ -111,14 +112,15 @@
         <para>
             The <filename>.bb</filename> files are usually referred to as "recipes."
             In general, a recipe contains information about a single piece of software.
-            The information includes the location from which to download the source patches
-            (if any are needed), which special configuration options to apply,
+            This information includes the location from which to download the
+            unaltered source, any source patches to be applied to that source
+            (if needed), which special configuration options to apply,
             how to compile the source files, and how to package the compiled output.
         </para>
 
         <para>
-            The term "package" can also be used to describe recipes.
-            However, since the same word is used for the packaged output from the OpenEmbedded
+            The term "package" is sometimes used to refer to recipes. However,
+            since the word "package" is used for the packaged output from the OpenEmbedded
             build system (i.e. <filename>.ipk</filename> or <filename>.deb</filename> files),
             this document avoids using the term "package" when referring to recipes.
         </para>
@@ -162,7 +164,7 @@
         <ulink url='&YOCTO_DOCS_DEV_URL;#cross-development-toolchain'>cross-development toolchains</ulink>.
         This section provides some technical background information on how
         cross-development toolchains are created and used.
-        For more information on these toolchain, you can also see the
+        For more information on toolchains, you can also see the
         <ulink url='&YOCTO_DOCS_ADT_URL;'>the Yocto Project Application Developer's Guide</ulink>.
     </para>
 
@@ -347,7 +349,7 @@
         As mentioned in the previous paragraph, building from scratch ensures that
         everything is current and starts from a known state.
         However, building from scratch also takes much longer as it generally means
-        rebuilding things that do not necessarily need rebuilt.
+        rebuilding things that do not necessarily need to be rebuilt.
     </para>
 
     <para>
@@ -355,10 +357,11 @@
         The implementation of the shared state code answers the following questions that
         were fundamental roadblocks within the OpenEmbedded incremental build support system:
         <itemizedlist>
-            <listitem>What pieces of the system have changed and what pieces have not changed?</listitem>
-            <listitem>How are changed pieces of software removed and replaced?</listitem>
-            <listitem>How are pre-built components that do not need to be rebuilt from scratch
-                used when they are available?</listitem>
+            <listitem><para>What pieces of the system have changed and what pieces have
+                not changed?</para></listitem>
+            <listitem><para>How are changed pieces of software removed and replaced?</para></listitem>
+            <listitem><para>How are pre-built components that do not need to be rebuilt from scratch
+                used when they are available?</para></listitem>
         </itemizedlist>
     </para>
 
@@ -397,16 +400,16 @@
 
         <para>
             When determining what parts of the system need to be built, BitBake
-            uses a per-task basis and does not use a per-recipe basis.
+            works on a per-task basis rather than a per-recipe basis.
             You might wonder why using a per-task basis is preferred over a per-recipe basis.
             To help explain, consider having the IPK packaging backend enabled and then switching to DEB.
             In this case, <filename>do_install</filename> and <filename>do_package</filename>
-            output are still valid.
+            outputs are still valid.
             However, with a per-recipe approach, the build would not include the
             <filename>.deb</filename> files.
             Consequently, you would have to invalidate the whole build and rerun it.
-            Rerunning everything is not the best situation.
-            Also in this case, the core must be "taught" much about specific tasks.
+            Rerunning everything is not the best solution.
+            Also, in this case, the core must be "taught" much about specific tasks.
             This methodology does not scale well and does not allow users to easily add new tasks
             in layers or as external recipes without touching the packaged-staging core.
         </para>
@@ -431,11 +434,11 @@
             the checksum.
             First, there is the actual specific build path of a given task -
             the <link linkend='var-WORKDIR'><filename>WORKDIR</filename></link>.
-            It does not matter if the working directory changes because it should not
+            It does not matter if the work directory changes because it should not
             affect the output for target packages.
             Also, the build process has the objective of making native or cross packages relocatable.
             The checksum therefore needs to exclude <filename>WORKDIR</filename>.
-            The simplistic approach for excluding the working directory is to set
+            The simplistic approach for excluding the work directory is to set
             <filename>WORKDIR</filename> to some fixed value and create the checksum
             for the "run" script.
         </para>
@@ -512,17 +515,18 @@
             dependent task hashes can be influenced.
             Within the BitBake configuration file, we can give BitBake some extra information
             to help it construct the basehash.
-            The following statements effectively result in a list of global variable
+            The following statement effectively results in a list of global variable
             dependency excludes - variables never included in any checksum:
             <literallayout class='monospaced'>
-  BB_HASHBASE_WHITELIST ?= "TMPDIR FILE PATH PWD BB_TASKHASH BBPATH"
-  BB_HASHBASE_WHITELIST += "DL_DIR SSTATE_DIR THISDIR FILESEXTRAPATHS"
-  BB_HASHBASE_WHITELIST += "FILE_DIRNAME HOME LOGNAME SHELL TERM USER"
-  BB_HASHBASE_WHITELIST += "FILESPATH USERNAME STAGING_DIR_HOST STAGING_DIR_TARGET"
+     BB_HASHBASE_WHITELIST ?= "TMPDIR FILE PATH PWD BB_TASKHASH BBPATH DL_DIR \
+         SSTATE_DIR THISDIR FILESEXTRAPATHS FILE_DIRNAME HOME LOGNAME SHELL TERM \
+         USER FILESPATH STAGING_DIR_HOST STAGING_DIR_TARGET COREBASE PRSERV_HOST \
+         PRSERV_DUMPDIR PRSERV_DUMPFILE PRSERV_LOCKDOWN PARALLEL_MAKE \
+         CCACHE_DIR EXTERNAL_TOOLCHAIN CCACHE CCACHE_DISABLE LICENSE_PATH SDKPKGSUFFIX"
             </literallayout>
-            The previous example actually excludes
+            The previous example excludes
             <link linkend='var-WORKDIR'><filename>WORKDIR</filename></link>
-            since it is actually constructed as a path within
+            since that variable is actually constructed as a path within
             <link linkend='var-TMPDIR'><filename>TMPDIR</filename></link>, which is on
             the whitelist.
         </para>
@@ -541,7 +545,7 @@
             <filename>OE-Core</filename> uses the "OEBasicHash" signature handler by default
             through this setting in the <filename>bitbake.conf</filename> file:
             <literallayout class='monospaced'>
-  BB_SIGNATURE_HANDLER ?= "OEBasicHash"
+     BB_SIGNATURE_HANDLER ?= "OEBasicHash"
             </literallayout>
             The "OEBasicHash" <filename>BB_SIGNATURE_HANDLER</filename> is the same as the
             "OEBasic" version but adds the task hash to the stamp files.
@@ -550,7 +554,7 @@
             change that changes the task hash, automatically
             causing the task to be run again.
             This removes the need to bump <link linkend='var-PR'><filename>PR</filename></link>
-            values and changes to Metadata automatically ripple across the build.
+            values, and changes to Metadata automatically ripple across the build.
         </para>
 
         <para>
@@ -558,10 +562,10 @@
             make some dependency and hash information available to the build.
             This information includes:
             <literallayout class='monospaced'>
-  BB_BASEHASH_task-&lt;taskname&gt; - the base hashes for each task in the recipe
-  BB_BASEHASH_&lt;filename:taskname&gt; - the base hashes for each dependent task
-  BBHASHDEPS_&lt;filename:taskname&gt; - The task dependencies for each task
-  BB_TASKHASH - the hash of the currently running task
+     BB_BASEHASH_task-&lt;taskname&gt; - the base hashes for each task in the recipe
+     BB_BASEHASH_&lt;filename:taskname&gt; - the base hashes for each dependent task
+     BBHASHDEPS_&lt;filename:taskname&gt; - The task dependencies for each task
+     BB_TASKHASH - the hash of the currently running task
             </literallayout>
         </para>
     </section>
@@ -571,7 +575,7 @@
 
         <para>
             Checksums and dependencies, as discussed in the previous section, solve half the
-            problem.
+            problem of supporting a shared state.
             The other part of the problem is being able to use checksum information during the build
             and being able to reuse or rebuild specific components.
         </para>
@@ -581,7 +585,7 @@
             is a relatively generic implementation of how to "capture" a snapshot of a given task.
             The idea is that the build process does not care about the source of a task's output.
             Output could be freshly built or it could be downloaded and unpacked from
-            somewhere - the build process does not need to worry about its source.
+            somewhere - the build process does not need to worry about its origin.
         </para>
 
         <para>
@@ -598,7 +602,7 @@
             <filename>sstate.bbclass</filename>.
             From a user's perspective, adding shared state wrapping to a task
             is as simple as this <filename>do_deploy</filename> example taken from
-            <filename>do_deploy.bbclass</filename>:
+            <filename>deploy.bbclass</filename>:
             <literallayout class='monospaced'>
      DEPLOYDIR = "${WORKDIR}/deploy-${PN}"
      SSTATETASKS += "do_deploy"
@@ -610,8 +614,9 @@
          sstate_setscene(d)
      }
      addtask do_deploy_setscene
+     do_deploy[dirs] = "${DEPLOYDIR} ${B}"
             </literallayout>
-            In the example, we add some extra flags to the task, a name field ("deploy"), an
+            In this example, we add some extra flags to the task, a name field ("deploy"), an
             input directory where the task sends data, and the output
             directory where the data from the task should eventually be copied.
             We also add a <filename>_setscene</filename> variant of the task and add the task
@@ -730,43 +735,61 @@
             <title>Invalidating Shared State</title>
 
             <para>
-                The shared state code uses checksums and shared state
+                The OpenEmbedded build system uses checksums and shared state
                 cache to avoid unnecessarily rebuilding tasks.
+                Collectively, this scheme is known as "shared state code."
+            </para>
+
+            <para>
                 As with all schemes, this one has some drawbacks.
-                It is possible that you could make implicit changes that are not factored
-                into the checksum calculation, but do affect a task's output.
-                A good example is perhaps when a tool changes its output.
-                Assume that the output of <filename>rpmdeps</filename> needed to change.
+                It is possible that you could make implicit changes to your
+                code that the checksum calculations do not take into
+                account (i.e. implicit changes).
+                These implicit changes affect a task's output but do not trigger
+                the shared state code into rebuilding a recipe.
+                Consider an example during which a tool changes its output.
+                Assume that the output of <filename>rpmdeps</filename> changes.
                 The result of the change should be that all the
-                <filename>package</filename>, <filename>package_write_rpm</filename>,
-                and <filename>package_deploy-rpm</filename> shared state cache
-                items would become invalid.
-                But, because this is a change that is external to the code and therefore implicit,
-                the associated shared state cache items do not become invalidated.
-                In this case, the build process uses the cached items rather than running the
-                task again.
+                <filename>package</filename> and
+                <filename>package_write_rpm</filename> shared state cache
+                items become invalid.
+                However, because the change to the output is
+                external to the code and therefore implicit,
+                the associated shared state cache items do not become
+                invalidated.
+                In this case, the build process uses the cached items rather
+                than running the task again.
                 Obviously, these types of implicit changes can cause problems.
             </para>
 
             <para>
-                To avoid these problems during the build, you need to understand the effects of any
-                change you make.
-                Note that any changes you make directly to a function automatically are factored into
-                the checksum calculation and thus, will invalidate the associated area of sstate cache.
-                You need to be aware of any implicit changes that are not obvious changes to the
-                code and could affect the output of a given task.
-                Once you are aware of such changes, you can take steps to invalidate the cache
-                and force the tasks to run.
-                The steps to take are as simple as changing function's comments in the source code.
-                For example, to invalidate package shared state files, change the comment statements
-                of <filename>do_package</filename> or the comments of one of the functions it calls.
-                The change is purely cosmetic, but it causes the checksum to be recalculated and
-                forces the task to be run again.
+                To avoid these problems during the build, you need to
+                understand the effects of any changes you make.
+                Realize that changes you make directly to a function
+                are automatically factored into the checksum calculation.
+                Thus, these explicit changes invalidate the associated area of
+                sstate cache.
+                However, you need to be aware of any implicit changes that
+                are not obvious changes to the code and could affect the output
+                of a given task.
+            </para>
+
+            <para>
+                When you identify an implicit change, you can easily take steps
+                to invalidate the cache and force the tasks to run.
+                The steps you can take are as simple as changing a function's
+                comments in the source code.
+                For example, to invalidate package shared state files, change
+                the comment statements of <filename>do_package</filename> or
+                the comments of one of the functions it calls.
+                Even though the change is purely cosmetic, it causes the
+                checksum to be recalculated and forces the OpenEmbedded build
+                system to run the task again.
             </para>
 
             <note>
-                For an example of a commit that makes a cosmetic change to invalidate
-                a shared state, see this
+                For an example of a commit that makes a cosmetic change to
+                invalidate shared state, see this
                 <ulink url='&YOCTO_GIT_URL;/cgit.cgi/poky/commit/meta/classes/package.bbclass?id=737f8bbb4f27b4837047cb9b4fbfe01dfde36d54'>commit</ulink>.
             </note>
         </section>
@@ -868,7 +891,7 @@
 
     <para>
         <ulink url='http://en.wikipedia.org/wiki/Wayland_(display_server_protocol)#Weston'>Wayland</ulink>
-        is a computer display server protocol that when implemented
+        is a computer display server protocol that
         provides a method for compositing window managers to communicate
         directly with applications and video hardware and expects them to
         communicate with input hardware using other libraries.
@@ -879,7 +902,7 @@
 
     <para>
         The Yocto Project provides the Wayland protocol libraries and the
-        reference Weston compositor as part of it release.
+        reference Weston compositor as part of its release.
         This section describes what you need to do to implement Wayland and
         use the compositor when building an image for a supporting target.
     </para>
@@ -974,7 +997,7 @@
         <para>
             Alternatively, you can run Weston through the command-line
             interpretor (CLI), which is better suited for development work.
-            To run Weston under the CLI you need to do the following after
+            To run Weston under the CLI, you need to do the following after
             your image is built:
             <orderedlist>
                 <listitem><para>Run these commands to export
@@ -982,7 +1005,7 @@
                     <literallayout class='monospaced'>
      mkdir -p /tmp/$USER-weston
      chmod 0700 /tmp/$USER-weston
-     export XDG_RUNTIME_DIR=/tmp/$USER=weston
+     export XDG_RUNTIME_DIR=/tmp/$USER-weston
                     </literallayout></para></listitem>
                 <listitem><para>Launch Weston in the shell:
                     <literallayout class='monospaced'>
@@ -1126,7 +1149,7 @@
             recipe-by-recipe basis through the <filename>LICENSE_FLAGS</filename> variable
             definition in the affected recipe.
             For instance, the
-            <filename>$HOME/poky/meta/recipes-multimedia/gstreamer/gst-plugins-ugly</filename>
+            <filename>poky/meta/recipes-multimedia/gstreamer/gst-plugins-ugly</filename>
             recipe contains the following statement:
             <literallayout class='monospaced'>
      LICENSE_FLAGS = "commercial"
@@ -1142,7 +1165,7 @@
 	        <filename>LICENSE_FLAGS_WHITELIST</filename> variable, which is a variable
 	        typically defined in your <filename>local.conf</filename> file.
             For example, to enable
-	        the <filename>$HOME/poky/meta/recipes-multimedia/gstreamer/gst-plugins-ugly</filename>
+	        the <filename>poky/meta/recipes-multimedia/gstreamer/gst-plugins-ugly</filename>
 	        package, you could add either the string
 	        "commercial_gst-plugins-ugly" or the more general string
 	        "commercial" to <filename>LICENSE_FLAGS_WHITELIST</filename>.
@@ -1163,7 +1186,7 @@
             </literallayout>
 	        As a convenience, you do not need to specify the complete license string
 	        in the whitelist for every package.
-            you can use an abbreviated form, which consists
+            You can use an abbreviated form, which consists
 	        of just the first portion or portions of the license string before
 	        the initial underscore character or characters.
             A partial string will match
@@ -1185,10 +1208,10 @@
 		        License flag matching allows you to control what recipes the
                 OpenEmbedded build system includes in the build.
                 Fundamentally, the build system attempts to match
-                <filename>LICENSE_FLAG</filename> strings found in
+                <filename>LICENSE_FLAGS</filename> strings found in
                 recipes against <filename>LICENSE_FLAGS_WHITELIST</filename>
                 strings found in the whitelist.
-                A match, causes the build system to include a recipe in the
+                A match causes the build system to include a recipe in the
                 build, while failure to find a match causes the build system to
                 exclude a recipe.
             </para>
@@ -1249,7 +1272,7 @@
 
             <para>
                 This scheme works even if the
-                <filename>LICENSE_FLAG</filename> string already
+                <filename>LICENSE_FLAGS</filename> string already
                 has <filename>_${PN}</filename> appended.
                 For example, the build system turns the license flag
                 "commercial_1.2_foo" into "commercial_1.2_foo_foo" and would
@@ -1289,7 +1312,7 @@
             <para>
                 Other helpful variables related to commercial
                 license handling exist and are defined in the
-                <filename>$HOME/poky/meta/conf/distro/include/default-distrovars.inc</filename> file:
+                <filename>poky/meta/conf/distro/include/default-distrovars.inc</filename> file:
                 <literallayout class='monospaced'>
      COMMERCIAL_AUDIO_PLUGINS ?= ""
      COMMERCIAL_VIDEO_PLUGINS ?= ""

documentation/ref-manual/usingpoky.xml

@@ -40,7 +40,7 @@
         </para>
 
         <para>
-            The <filename>build_dir</filename> is optional and specifies the directory the
+            The <filename>build_dir</filename> argument is optional and specifies the directory the
             OpenEmbedded build system uses for the build -
             the <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>.
             If you do not specify a Build Directory, it defaults to a directory
@@ -62,7 +62,7 @@
         <para>
             The <filename>target</filename> is the name of the recipe you want to build.
             Common targets are the images in <filename>meta/recipes-core/images</filename>,
-            <filename>/meta/recipes-sato/images</filename>, etc. all found in the
+            <filename>meta/recipes-sato/images</filename>, etc. all found in the
             <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink>.
             Or, the target can be the name of a recipe for a specific piece of software such as
             BusyBox.
@@ -72,7 +72,7 @@
 
         <note>
             Building an image without GNU General Public License Version 3 (GPLv3) components
-            is only supported for minimal and base images.
+            is supported for only minimal and base images.
             See the "<link linkend='ref-images'>Images</link>" chapter for more information.
         </note>
     </section>
@@ -158,7 +158,7 @@
             <filename>package_write</filename>, and <filename>build</filename>.
             The default task is <filename>build</filename> and any tasks on which it depends
             build first.
-            Some tasks exist, such as <filename>devshell</filename>, that are not part of the
+            Some tasks, such as <filename>devshell</filename>, are not part of the
             default build chain.
             If you wish to run a task that is not part of the default build chain, you can use the
             <filename>-c</filename> option in BitBake.
@@ -169,14 +169,15 @@
         </para>
 
         <para>
-            If you wish to rerun a task, use the <filename>-f</filename> force option.
-            For example, the following sequence forces recompilation after changing files in the
-            working directory.
+            If you wish to rerun a task, use the <filename>-f</filename> force
+            option.
+            For example, the following sequence forces recompilation after
+            changing files in the work directory.
             <literallayout class='monospaced'>
      $ bitbake matchbox-desktop
                .
                .
-        [make some changes to the source code in the working directory]
+        [make some changes to the source code in the work directory]
                .
                .
      $ bitbake matchbox-desktop -c compile -f
@@ -206,14 +207,19 @@
         <title>Dependency Graphs</title>
 
         <para>
-            Sometimes it can be hard to see why BitBake wants to build some other packages before a given
-            package you have specified.
-            The <filename>bitbake -g targetname</filename> command creates the
-            <filename>depends.dot</filename>, <filename>package-depends.dot</filename>,
-            and <filename>task-depends.dot</filename> files in the current directory.
-            These files show the package and task dependencies and are useful for debugging problems.
-            You can use the <filename>bitbake -g -u depexp targetname</filename> command to
-            display the results in a more human-readable form.
+            Sometimes it can be hard to see why BitBake wants to build
+            other packages before building a given package you have specified.
+            The <filename>bitbake -g &lt;targetname&gt;</filename> command
+            creates the <filename>pn-buildlist</filename>,
+            <filename>pn-depends.dot</filename>,
+            <filename>package-depends.dot</filename>, and
+            <filename>task-depends.dot</filename> files in the current
+            directory.
+            These files show what will be built and the package and task
+            dependencies, which are useful for debugging problems.
+            You can use the
+            <filename>bitbake -g -u depexp &lt;targetname&gt;</filename>
+            command to display the results in a more human-readable form.
         </para>
     </section>
 
@@ -271,12 +277,18 @@
     <section id='usingpoky-debugging-buildfile'>
         <title>Building with No Dependencies</title>
         <para>
-            If you really want to build a specific <filename>.bb</filename> file, you can use
-            the command form <filename>bitbake -b &lt;somepath/somefile.bb&gt;</filename>.
-            This command form does not check for dependencies so you should use it
-            only when you know its dependencies already exist.
-            You can also specify fragments of the filename.
-            In this case, BitBake checks for a unique match.
+            To build a specific recipe (<filename>.bb</filename> file),
+            you can use the following command form:
+            <literallayout class='monospaced'>
+     $ bitbake -b &lt;somepath/somerecipe.bb&gt;
+            </literallayout>
+            This command form does not check for dependencies.
+            Consequently, you should use it
+            only when you know dependencies already exist.
+            <note>
+                You can also specify fragments of the filename.
+                In this case, BitBake checks for a unique match.
+            </note>
         </para>
     </section>
 
@@ -284,11 +296,16 @@
         <title>Variables</title>
         <para>
             You can use the <filename>-e</filename> BitBake option to
-            display the resulting environment for a configuration
-            when you do not specify a package or for a specific package when
-            you do specify the package.
-            If you want to show the environment resulting from parsing a single
-            recipe, use the <filename>-b recipename</filename> form.
+            display the parsing environment for a configuration.
+            The following displays the general parsing environment:
+            <literallayout class='monospaced'>
+     $ bitbake -e
+            </literallayout>
+            This next example shows the parsing environment for a specific
+            recipe:
+            <literallayout class='monospaced'>
+     $ bitbake -e &lt;recipename&gt;
+            </literallayout>
         </para>
     </section>
 
@@ -479,11 +496,11 @@
             from your <filename>conf/local.conf</filename> file.
             However, you should realize that enabling and disabling
             build history in this manner can change the
-            <filename>do_package</filename> task checksums, which if you
+            <filename>do_package</filename> task checksums which, if you
             are using the OEBasicHash signature generator (the default
             for many current distro configurations including
             <filename>DISTRO = "poky"</filename> and
-            <filename>DISTRO = ""</filename>) and will result in the packaging
+            <filename>DISTRO = ""</filename>) will result in the packaging
             tasks being re-run during the subsequent build.
         </para>
 

documentation/tools/mega-manual.sed

@@ -1,13 +1,14 @@
 # Processes ref-manual and yocto-project-qs manual (<word>-<word>-<word> style)
-s/\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/1.5\/[a-z]*-[a-z]*-[a-z]*\/[a-z]*-[a-z]*-[a-z]*.html#/\"link\" href=\"#/g
+s/\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/1.5.4\/[a-z]*-[a-z]*-[a-z]*\/[a-z]*-[a-z]*-[a-z]*.html#/\"link\" href=\"#/g
 
 # Processes all other manuals (<word>-<word> style)
-s/\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/1.5\/[a-z]*-[a-z]*\/[a-z]*-[a-z]*.html#/\"link\" href=\"#/g
+s/\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/1.5.4\/[a-z]*-[a-z]*\/[a-z]*-[a-z]*.html#/\"link\" href=\"#/g
 
 # Process cases where just an external manual is referenced without an id anchor
-s/<a class=\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/1.5\/yocto-project-qs\/yocto-project-qs.html\" target=\"_top\">Yocto Project Quick Start<\/a>/Yocto Project Quick Start/g
-s/<a class=\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/1.5\/dev-manual\/dev-manual.html\" target=\"_top\">Yocto Project Development Manual<\/a>/Yocto Project Development Manual/g
-s/<a class=\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/1.5\/adt-manual\/adt-manual.html\" target=\"_top\">Yocto Project Application Developer's Guide<\/a>/Yocto Project Application Developer's Guide/g
-s/<a class=\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/1.5\/bsp-guide\/bsp-guide.html\" target=\"_top\">Yocto Project Board Support Package (BSP) Developer's Guide<\/a>/Yocto Project Board Support Package (BSP) Developer's Guide/g
-s/<a class=\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/1.5\/kernel-dev\/kernel-dev.html\" target=\"_top\">Yocto Project Linux Kernel Development Manual<\/a>/Yocto Project Linux Kernel Development Manual/g
-s/<a class=\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/1.5\/ref-manual\/ref-manual.html\" target=\"_top\">Yocto Project Reference Manual<\/a>/Yocto Project Reference Manual/g
+s/<a class=\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/1.5.4\/yocto-project-qs\/yocto-project-qs.html\" target=\"_top\">Yocto Project Quick Start<\/a>/Yocto Project Quick Start/g
+s/<a class=\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/1.5.4\/dev-manual\/dev-manual.html\" target=\"_top\">Yocto Project Development Manual<\/a>/Yocto Project Development Manual/g
+s/<a class=\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/1.5.4\/adt-manual\/adt-manual.html\" target=\"_top\">Yocto Project Application Developer's Guide<\/a>/Yocto Project Application Developer's Guide/g
+s/<a class=\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/1.5.4\/bsp-guide\/bsp-guide.html\" target=\"_top\">Yocto Project Board Support Package (BSP) Developer's Guide<\/a>/Yocto Project Board Support Package (BSP) Developer's Guide/g
+s/<a class=\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/1.5.4\/profile-manual\/profile-manual.html\" target=\"_top\">Yocto Project Profiling and Tracing Manual<\/a>/Yocto Project Profiling and Tracing Manual/g
+s/<a class=\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/1.5.4\/kernel-dev\/kernel-dev.html\" target=\"_top\">Yocto Project Linux Kernel Development Manual<\/a>/Yocto Project Linux Kernel Development Manual/g
+s/<a class=\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/1.5.4\/ref-manual\/ref-manual.html\" target=\"_top\">Yocto Project Reference Manual<\/a>/Yocto Project Reference Manual/g

documentation/yocto-project-qs/yocto-project-qs.xml

@@ -17,11 +17,10 @@
                 the terms of the <ulink type="http" url="http://creativecommons.org/licenses/by-sa/2.0/uk/">Creative Commons Attribution-Share Alike 2.0 UK: England &amp; Wales</ulink> as published by Creative Commons.
             </para>
             <note>
-                Due to production processes, there could be differences between the Yocto Project
-                documentation bundled in the release tarball and the
-                <ulink url='&YOCTO_DOCS_QS_URL;'>Yocto Project Quick Start</ulink> on
-                the <ulink url='&YOCTO_HOME_URL;'>Yocto Project</ulink> website.
-                For the latest version of this manual, see the manual on the website.
+                For the latest version of this manual associated with this
+                Yocto Project release, see the
+                <ulink url='&YOCTO_DOCS_QS_URL;'>Yocto Project Quick Start</ulink>
+                from the Yocto Project website.
             </note>
         </legalnotice>
 
@@ -232,11 +231,6 @@
                 distributions listed in the
                 "<ulink url='&YOCTO_DOCS_REF_URL;#detailed-supported-distros'>Supported Linux Distributions</ulink>"
                 section of the Yocto Project Reference Manual.
-                Refer to
-                <ulink url='&OE_HOME_URL;/index.php?title=OEandYourDistro'>OE and Your Distro</ulink> and
-                <ulink url='&OE_HOME_URL;/index.php?title=Required_software'>Required Software</ulink>
-                for information for information about dependencies and
-                requirements.
                 If you encounter problems, please go to
                 <ulink url='&YOCTO_BUGZILLA_URL;'>Yocto Project Bugzilla</ulink>
                 and submit a bug.
@@ -591,7 +585,7 @@
             </para>
 
             <literallayout class='monospaced'>
-     poky-eglibc-&lt;<emphasis>host_system</emphasis>&gt;-&lt;<emphasis>image_type</emphasis>&gt;-&lt;<emphasis>arch</emphasis>&gt;-&lt;<emphasis>release_version</emphasis>&gt;.sh
+     poky-eglibc-&lt;<emphasis>host_system</emphasis>&gt;-&lt;<emphasis>image_type</emphasis>&gt;-&lt;<emphasis>arch</emphasis>&gt;-toolchain-&lt;<emphasis>release_version</emphasis>&gt;.sh
 
      Where:
          &lt;<emphasis>host_system</emphasis>&gt; is a string representing your development system:
@@ -620,7 +614,7 @@
                 development host system and a i586-tuned target architecture
                 based off the SDK for <filename>core-image-sato</filename>:
                 <literallayout class='monospaced'>
-     poky-eglibc-x86_64-core-image-sato-i586-&DISTRO;.sh
+     poky-eglibc-x86_64-core-image-sato-i586-toolchain-&DISTRO;.sh
                 </literallayout>
             </para>
 
@@ -649,7 +643,7 @@
 
             <para>
                 <literallayout class='monospaced'>
-     $ ~/Downloads/poky-eglibc-x86_64-core-image-sato-i586-&DISTRO;.sh
+     $ ~/Downloads/poky-eglibc-x86_64-core-image-sato-i586-toolchain-&DISTRO;.sh
                 </literallayout>
             </para>
 
@@ -722,11 +716,6 @@
          &lt;<emphasis>arch</emphasis>&gt; is a string representing the target architecture:
                 x86, x86-64, ppc, mips, or arm.
                 </literallayout>
-                <note>
-                    For the <filename>qemu</filename> architecture,
-                    <filename>ext3</filename> and <filename>tar</filename>
-                    files start with the "lib32" string.
-                </note>
             </para>
         </section>
 

meta-yocto-bsp/recipes-kernel/linux/linux-yocto_3.10.bbappend

@@ -7,11 +7,11 @@ KBRANCH_beagleboard = "standard/beagleboard"
 KMACHINE_genericx86 ?= "common-pc"
 KMACHINE_genericx86-64 ?= "common-pc-64"
 
-SRCREV_machine_genericx86 ?= "702040ac7c7ec66a29b4d147665ccdd0ff015577"
-SRCREV_machine_genericx86-64 ?= "702040ac7c7ec66a29b4d147665ccdd0ff015577"
-SRCREV_machine_routerstationpro ?= "d4e6adefaf92a1e7b6539d371ba49b78bd194a84"
-SRCREV_machine_mpc8315e-rdb ?= "12dc46ba4efb80e135fec4dce913eeb87ee671b3"
-SRCREV_machine_beagleboard ?= "702040ac7c7ec66a29b4d147665ccdd0ff015577"
+SRCREV_machine_genericx86 ?= "c03195ed6e3066494e3fb4be69154a57066e845b"
+SRCREV_machine_genericx86-64 ?= "c03195ed6e3066494e3fb4be69154a57066e845b"
+SRCREV_machine_routerstationpro ?= "2d91e201018c15e24fb83336dcb4029b8569eb9d"
+SRCREV_machine_mpc8315e-rdb ?= "ac071526ffac37c907532933b628e4f64070f155"
+SRCREV_machine_beagleboard ?= "3d9b0d130a00dd32e6061ac708eaaaed69e35c3d"
 
 COMPATIBLE_MACHINE_genericx86 = "genericx86"
 COMPATIBLE_MACHINE_genericx86-64 = "genericx86-64"

meta-yocto/conf/distro/include/package_regex.inc

@@ -216,7 +216,7 @@ REGEX_URI_pn-psmisc = "http://sourceforge.net/projects/psmisc/files/psmisc/"
 REGEX_pn-psmisc = "[hH][rR][eE][fF]=\"http://sourceforge.net/projects/psmisc/files/psmisc/psmisc\-(?P<pver>((\d+[\.\-_]*)+))\.tar\.gz/download\""
 REGEX_URI_pn-python-argparse = "https://code.google.com/p/argparse/downloads/list"
 REGEX_URI_pn-python-docutils = "http://sourceforge.net/projects/docutils/files/docutils/"
-REGEX_pn-python-docutils = "[hH][rR][eE][fF]=\"/projects/docutils/files/docutils/docutils\-(?P<pver>((\d+[\.\-_]*)+)).*/\""
+REGEX_pn-python-docutils = "[hH][rR][eE][fF]=\"/projects/docutils/files/docutils/(?P<pver>((\d+[\.\-_]*)+)).*/\""
 REGEX_URI_pn-python-pycurl = "http://pycurl.sourceforge.net/download/"
 REGEX_pn-python-pycurl = "[hH][rR][eE][fF]=\"pycurl-(?P<pver>((\d+[\.\-_]*)+)).tar.gz\""
 REGEX_URI_pn-python-scons = "http://sourceforge.net/projects/scons/files/scons/"

meta-yocto/conf/distro/poky.conf

@@ -1,7 +1,7 @@
 DISTRO = "poky"
 DISTRO_NAME = "Poky (Yocto Project Reference Distro)"
-DISTRO_VERSION = "1.5"
-DISTRO_CODENAME = "next"
+DISTRO_VERSION = "1.5.4"
+DISTRO_CODENAME = "dora"
 SDK_VENDOR = "-pokysdk"
 SDK_VERSION := "${@'${DISTRO_VERSION}'.replace('snapshot-${DATE}','snapshot')}"
 
@@ -77,12 +77,16 @@ SANITY_TESTED_DISTROS ?= " \
             Ubuntu-12.04 \n \
             Ubuntu-12.10 \n \
             Ubuntu-13.04 \n \
+            Ubuntu-13.10 \n \
             Fedora-18 \n \
             Fedora-19 \n \
+            Fedora-20 \n \
             CentOS-6.4 \n \
             Debian-6.0.7 \n \
             Debian-7.0 \n \
             Debian-7.1 \n \
+            Debian-7.2 \n \
+            Debian-7.3 \n \
             SUSE-LINUX-12.2 \n \
             openSUSE-project-12.3 \n \
             "

meta-yocto/recipes-core/busybox/busybox_1.21.1.bbappend

@@ -1,2 +1,2 @@
-FILESEXTRAPATHS_prepend_poky := "${THISDIR}/${P}:"
+FILESEXTRAPATHS_prepend := "${THISDIR}/${BPN}:"
 

meta/classes/base.bbclass

@@ -210,7 +210,7 @@ def preferred_ml_updates(d):
             virt = "virtual/"
         for p in prefixes:
             if pkg != "kernel":
-                val = p + "-" + val
+                newval = p + "-" + val
 
             # implement variable keys
             localdata = bb.data.createCopy(d)
@@ -219,12 +219,12 @@ def preferred_ml_updates(d):
             bb.data.update_data(localdata)
             newname = localdata.expand(prov)
             if newname != prov and not d.getVar(newname, False):
-                d.setVar(newname, localdata.expand(val))
+                d.setVar(newname, localdata.expand(newval))
 
             # implement alternative multilib name
             newname = localdata.expand("PREFERRED_PROVIDER_" + virt + p + "-" + pkg)
             if not d.getVar(newname, False):
-                d.setVar(newname, val)
+                d.setVar(newname, newval)
         # Avoid future variable key expansion
         provexp = d.expand(prov)
         if prov != provexp and d.getVar(prov, False):
@@ -433,7 +433,7 @@ python () {
         extradeps = []
         extrardeps = []
         extraconf = []
-        for flag, flagval in pkgconfigflags.items():
+        for flag, flagval in sorted(pkgconfigflags.items()):
             if flag == "defaultval":
                 continue
             items = flagval.split(",")
@@ -485,14 +485,15 @@ python () {
     # If we're building a target package we need to use fakeroot (pseudo)
     # in order to capture permissions, owners, groups and special files
     if not bb.data.inherits_class('native', d) and not bb.data.inherits_class('cross', d):
-        d.setVarFlag('do_configure', 'umask', 022)
-        d.setVarFlag('do_compile', 'umask', 022)
+        d.setVarFlag('do_unpack', 'umask', '022')
+        d.setVarFlag('do_configure', 'umask', '022')
+        d.setVarFlag('do_compile', 'umask', '022')
         d.appendVarFlag('do_install', 'depends', ' virtual/fakeroot-native:do_populate_sysroot')
         d.setVarFlag('do_install', 'fakeroot', 1)
-        d.setVarFlag('do_install', 'umask', 022)
+        d.setVarFlag('do_install', 'umask', '022')
         d.appendVarFlag('do_package', 'depends', ' virtual/fakeroot-native:do_populate_sysroot')
         d.setVarFlag('do_package', 'fakeroot', 1)
-        d.setVarFlag('do_package', 'umask', 022)
+        d.setVarFlag('do_package', 'umask', '022')
         d.setVarFlag('do_package_setscene', 'fakeroot', 1)
         d.appendVarFlag('do_package_setscene', 'depends', ' virtual/fakeroot-native:do_populate_sysroot')
         d.setVarFlag('do_devshell', 'fakeroot', 1)
@@ -581,6 +582,10 @@ python () {
     if ".zip" in srcuri:
         d.appendVarFlag('do_unpack', 'depends', ' unzip-native:do_populate_sysroot')
 
+    # file is needed by rpm2cpio.sh
+    if ".src.rpm" in srcuri:
+        d.appendVarFlag('do_unpack', 'depends', ' file-native:do_populate_sysroot')
+
     set_packagetriplet(d)
 
     # 'multimachine' handling

meta/classes/binconfig.bbclass

@@ -5,6 +5,7 @@ def get_binconfig_mangle(d):
 	s = "-e ''"
 	if not bb.data.inherits_class('native', d):
 		optional_quote = r"\(\"\?\)"
+		s += " -e 's:=%s${base_libdir}:=\\1OEBASELIBDIR:;'" % optional_quote
 		s += " -e 's:=%s${libdir}:=\\1OELIBDIR:;'" % optional_quote
 		s += " -e 's:=%s${includedir}:=\\1OEINCDIR:;'" % optional_quote
 		s += " -e 's:=%s${datadir}:=\\1OEDATADIR:'" % optional_quote
@@ -12,6 +13,7 @@ def get_binconfig_mangle(d):
 		s += " -e 's:=%s${exec_prefix}/:=\\1OEEXECPREFIX/:'" % optional_quote
 		s += " -e 's:-L${libdir}:-LOELIBDIR:;'"
 		s += " -e 's:-I${includedir}:-IOEINCDIR:;'"
+		s += " -e 's:OEBASELIBDIR:${STAGING_BASELIBDIR}:;'"
 		s += " -e 's:OELIBDIR:${STAGING_LIBDIR}:;'"
 		s += " -e 's:OEINCDIR:${STAGING_INCDIR}:;'"
 		s += " -e 's:OEDATADIR:${STAGING_DATADIR}:'"
@@ -31,7 +33,8 @@ PACKAGE_PREPROCESS_FUNCS += "binconfig_package_preprocess"
 binconfig_package_preprocess () {
 	for config in `find ${PKGD} -name '${BINCONFIG_GLOB}'`; do
 		sed -i \
-		    -e 's:${STAGING_LIBDIR}:${libdir}:g;' \ 
+		    -e 's:${STAGING_BASELIBDIR}:${base_libdir}:g;' \
+		    -e 's:${STAGING_LIBDIR}:${libdir}:g;' \
 		    -e 's:${STAGING_INCDIR}:${includedir}:g;' \
 		    -e 's:${STAGING_DATADIR}:${datadir}:' \
 		    -e 's:${STAGING_DIR_HOST}${prefix}:${prefix}:' \
@@ -39,6 +42,7 @@ binconfig_package_preprocess () {
 	done
 	for lafile in `find ${PKGD} -name "*.la"` ; do
 		sed -i \
+		    -e 's:${STAGING_BASELIBDIR}:${base_libdir}:g;' \
 		    -e 's:${STAGING_LIBDIR}:${libdir}:g;' \
 		    -e 's:${STAGING_INCDIR}:${includedir}:g;' \
 		    -e 's:${STAGING_DATADIR}:${datadir}:' \

meta/classes/cpan-base.bbclass

@@ -10,6 +10,9 @@ RDEPENDS_${PN} += "${@["perl", ""][(bb.data.inherits_class('native', d))]}"
 PERL_OWN_DIR = "${@["", "/perl-native"][(bb.data.inherits_class('native', d))]}"
 
 # Determine the staged version of perl from the perl configuration file
+# Assign vardepvalue, because otherwise signature is changed before and after
+# perl is built (from None to real version in config.sh).
+get_perl_version[vardepvalue] = "${PERL_OWN_DIR}"
 def get_perl_version(d):
     import re
     cfg = d.expand('${STAGING_LIBDIR}${PERL_OWN_DIR}/perl/config.sh')

meta/classes/cross-canadian.bbclass

@@ -15,12 +15,30 @@ STAGING_BINDIR_TOOLCHAIN = "${STAGING_DIR_NATIVE}${bindir_native}/${SDK_ARCH}${S
 # Update BASE_PACKAGE_ARCH and PACKAGE_ARCHS
 #
 PACKAGE_ARCH = "${SDK_ARCH}-${SDKPKGSUFFIX}"
+CANADIANEXTRAOS = ""
 python () {
     archs = d.getVar('PACKAGE_ARCHS', True).split()
     sdkarchs = []
     for arch in archs:
         sdkarchs.append(arch + '-${SDKPKGSUFFIX}')
     d.setVar('PACKAGE_ARCHS', " ".join(sdkarchs))
+
+    # PowerPC can build "linux" and "linux-gnuspe"
+    tarch = d.getVar("TARGET_ARCH", True)
+    if tarch == "powerpc":
+        tos = d.getVar("TARGET_OS", True)
+        if (tos != "linux" and tos != "linux-gnuspe"):
+            bb.fatal("Building cross-candian powerpc for an unknown TARGET_SYS (%s), please update cross-canadian.bbclass" % d.getVar("TARGET_SYS", True))
+        # Have to expand DEPENDS before we change the extensions
+        d.setVar("DEPENDS", d.getVar("DEPENDS", True))
+        d.setVar("STAGING_BINDIR_TOOLCHAIN", d.getVar("STAGING_BINDIR_TOOLCHAIN", True))
+        for prefix in ["AR", "AS", "DLLTOOL", "CC", "CXX", "GCC", "LD", "LIPO", "NM", "OBJDUMP", "RANLIB", "STRIP", "WINDRES"]:
+            n = prefix + "_FOR_TARGET"
+            d.setVar(n, d.getVar(n, True))
+
+        d.setVar("LIBCEXTENSION", "")
+        d.setVar("ABIEXTENSION", "")
+        d.setVar("CANADIANEXTRAOS", "linux-gnuspe")
 }
 MULTIMACH_TARGET_SYS = "${PACKAGE_ARCH}${HOST_VENDOR}-${HOST_OS}"
 
@@ -95,3 +113,21 @@ USE_NLS = "${SDKUSE_NLS}"
 # We have to us TARGET_ARCH but we care about the absolute value
 # and not any particular tune that is enabled.
 TARGET_ARCH[vardepsexclude] = "TUNE_ARCH"
+
+# If MLPREFIX is set by multilib code, shlibs
+# points to the wrong place so force it
+SHLIBSDIRS = "${PKGDATA_DIR}/nativesdk-shlibs"
+SHLIBSWORKDIR = "${PKGDATA_DIR}/nativesdk-shlibs"
+
+cross_canadian_bindirlinks () {
+	for i in ${CANADIANEXTRAOS}
+	do
+		d=${D}${bindir}/../${TARGET_ARCH}${TARGET_VENDOR}-$i
+		install -d $d
+		for j in `ls ${D}${bindir}`
+		do
+			p=${TARGET_ARCH}${TARGET_VENDOR}-$i-`echo $j | sed -e s,${TARGET_PREFIX},,`
+			ln -s ../${TARGET_SYS}/$j $d/$p
+		done
+       done
+}

meta/classes/extrausers.bbclass

@@ -54,6 +54,10 @@ set_user_group () {
 				bbfatal "Invalid command in EXTRA_USERS_PARAMS: $cmd"
 				;;
 		esac
+		# Avoid infinite loop if the last parameter doesn't end with ';'
+		if [ "$setting" = "$remaining" ]; then
+			break
+		fi
 		# iterate to the next setting
 		setting=`echo $remaining | cut -d ';' -f1`
 		remaining=`echo $remaining | cut -d ';' -f2-`

meta/classes/grub-efi.bbclass

@@ -16,6 +16,7 @@
 # ${GRUB_TIMEOUT} - timeout before executing the deault label (optional)
 
 do_bootimg[depends] += "grub-efi-${TRANSLATED_TARGET_ARCH}-native:do_deploy"
+do_bootdirectdisk[depends] += "grub-efi-${TRANSLATED_TARGET_ARCH}-native:do_deploy"
 
 GRUB_SERIAL ?= "console=ttyS0,115200"
 GRUBCFG = "${S}/grub.cfg"
@@ -48,7 +49,7 @@ grubefi_iso_populate() {
 	mkdir -p ${EFIIMGDIR}/${EFIDIR}
 	cp $iso_dir/${EFIDIR}/* ${EFIIMGDIR}${EFIDIR}
 	cp $iso_dir/vmlinuz ${EFIIMGDIR}
-	echo "EFI\\BOOT\\${GRUB_IMAGE}" > ${EFIIMGDIR}/startup.nsh
+	echo "${GRUB_IMAGE}" > ${EFIIMGDIR}/startup.nsh
 	if [ -f "$iso_dir/initrd" ] ; then
 		cp $iso_dir/initrd ${EFIIMGDIR}
 	fi

meta/classes/image-mklibs.bbclass

@@ -9,7 +9,7 @@ mklibs_optimize_image_doit() {
 	du -bs > ${WORKDIR}/mklibs/du.before.mklibs.txt
 	for i in `find .`; do file $i; done \
 		| grep ELF \
-		| grep "LSB executable" \
+		| grep "LSB *executable" \
 		| grep "dynamically linked" \
 		| sed "s/:.*//" \
 		| sed "s+^\./++" \
@@ -40,6 +40,7 @@ mklibs_optimize_image_doit() {
 		--ldlib ${dynamic_loader} \
 		--libdir ${baselib} \
 		--sysroot ${PKG_CONFIG_SYSROOT_DIR} \
+		--gcc-options "--sysroot=${PKG_CONFIG_SYSROOT_DIR}" \
 		--root ${IMAGE_ROOTFS} \
 		--target `echo ${TARGET_PREFIX} | sed 's/-$//' ` \
 		-d ${WORKDIR}/mklibs/dest \

meta/classes/image.bbclass

@@ -95,6 +95,8 @@ inherit image-${IMAGE_TYPE_live}
 IMAGE_TYPE_vmdk = '${@base_contains("IMAGE_FSTYPES", "vmdk", "vmdk", "empty", d)}'
 inherit image-${IMAGE_TYPE_vmdk}
 
+do_build[depends] += "virtual/kernel:do_deploy"
+
 python () {
     deps = " " + imagetypes_getdepends(d)
     d.appendVarFlag('do_rootfs', 'depends', deps)
@@ -408,7 +410,7 @@ log_check() {
 	done
 }
 
-MULTILIBRE_ALLOW_REP =. "${base_bindir}|${base_sbindir}|${bindir}|${sbindir}|${libexecdir}|"
+MULTILIBRE_ALLOW_REP =. "${base_bindir}|${base_sbindir}|${bindir}|${sbindir}|${libexecdir}|/lib/modules/[^/]*/modules.*|"
 MULTILIB_CHECK_FILE = "${WORKDIR}/multilib_check.py"
 MULTILIB_TEMP_ROOTFS = "${WORKDIR}/multilib"
 

meta/classes/image_types.bbclass

@@ -161,6 +161,7 @@ IMAGE_CMD_ext3 = "oe_mkext234fs ext3 ${EXTRA_IMAGECMD}"
 IMAGE_CMD_ext4 = "oe_mkext234fs ext4 ${EXTRA_IMAGECMD}"
 
 IMAGE_CMD_btrfs () {
+	touch ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.btrfs
 	mkfs.btrfs -b `expr ${ROOTFS_SIZE} \* 1024` ${EXTRA_IMAGECMD} -r ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.btrfs
 }
 
@@ -209,9 +210,9 @@ JFFS2_ERASEBLOCK ?= "0x40000"
 EXTRA_IMAGECMD_jffs2 ?= "--pad ${JFFS2_ENDIANNESS} --eraseblock=${JFFS2_ERASEBLOCK} --no-cleanmarkers"
 
 # Change these if you want default mkfs behavior (i.e. create minimal inode number)
-EXTRA_IMAGECMD_ext2 ?= "-i 8192"
-EXTRA_IMAGECMD_ext3 ?= "-i 8192"
-EXTRA_IMAGECMD_ext4 ?= "-i 8192"
+EXTRA_IMAGECMD_ext2 ?= "-i 4096"
+EXTRA_IMAGECMD_ext3 ?= "-i 4096"
+EXTRA_IMAGECMD_ext4 ?= "-i 4096"
 EXTRA_IMAGECMD_btrfs ?= ""
 EXTRA_IMAGECMD_elf ?= ""
 

meta/classes/kernel.bbclass

@@ -134,25 +134,14 @@ do_bundle_initramfs () {
 		echo "There is kernel image bundled with initramfs: ${B}/${KERNEL_OUTPUT}.initramfs"
 		install -m 0644 ${B}/${KERNEL_OUTPUT}.initramfs ${D}/boot/${KERNEL_IMAGETYPE}-initramfs-${MACHINE}.bin
 		echo "${B}/${KERNEL_OUTPUT}.initramfs"
-		cd ${B}
-		# Update deploy directory
-		if [ -e "${KERNEL_OUTPUT}.initramfs" ]; then
-			echo "Copying deploy kernel-initramfs image and setting up links..."
-			initramfs_base_name=${INITRAMFS_BASE_NAME}
-			initramfs_symlink_name=${KERNEL_IMAGETYPE}-initramfs-${MACHINE}
-			install -m 0644 ${KERNEL_OUTPUT}.initramfs ${DEPLOY_DIR_IMAGE}/${initramfs_base_name}.bin
-			cd ${DEPLOY_DIR_IMAGE}
-			ln -sf ${initramfs_base_name}.bin ${initramfs_symlink_name}.bin
-		fi
 	fi
 }
-do_bundle_initramfs[nostamp] = "1"
 
 python do_devshell_prepend () {
     os.environ["LDFLAGS"] = ''
 }
 
-addtask bundle_initramfs after do_compile
+addtask bundle_initramfs after do_install before do_deploy
 
 kernel_do_compile() {
 	unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS MACHINE
@@ -348,8 +337,7 @@ ALLOW_EMPTY_kernel-image = "1"
 ALLOW_EMPTY_kernel-modules = "1"
 DESCRIPTION_kernel-modules = "Kernel modules meta package"
 
-pkg_postinst_kernel-image () {
-	update-alternatives --install /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE} ${KERNEL_IMAGETYPE} ${KERNEL_IMAGETYPE}-${KERNEL_VERSION} ${KERNEL_PRIORITY} || true
+pkg_postinst_kernel-base () {
 	if [ ! -e "$D/lib/modules/${KERNEL_VERSION}" ]; then
 		mkdir -p $D/lib/modules/${KERNEL_VERSION}
 	fi
@@ -360,6 +348,10 @@ pkg_postinst_kernel-image () {
 	fi
 }
 
+pkg_postinst_kernel-image () {
+	update-alternatives --install /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE} ${KERNEL_IMAGETYPE} ${KERNEL_IMAGETYPE}-${KERNEL_VERSION} ${KERNEL_PRIORITY} || true
+}
+
 pkg_postrm_kernel-image () {
 	update-alternatives --remove ${KERNEL_IMAGETYPE} ${KERNEL_IMAGETYPE}-${KERNEL_VERSION} || true
 }
@@ -464,6 +456,17 @@ kernel_do_deploy() {
 	ln -sf ${KERNEL_IMAGE_BASE_NAME}.bin ${DEPLOYDIR}/${KERNEL_IMAGETYPE}
 
 	cp ${COREBASE}/meta/files/deploydir_readme.txt ${DEPLOYDIR}/README_-_DO_NOT_DELETE_FILES_IN_THIS_DIRECTORY.txt
+
+	cd ${B}
+	# Update deploy directory
+	if [ -e "${KERNEL_OUTPUT}.initramfs" ]; then
+		echo "Copying deploy kernel-initramfs image and setting up links..."
+		initramfs_base_name=${INITRAMFS_BASE_NAME}
+		initramfs_symlink_name=${KERNEL_IMAGETYPE}-initramfs-${MACHINE}
+		install -m 0644 ${KERNEL_OUTPUT}.initramfs ${DEPLOYDIR}/${initramfs_base_name}.bin
+		cd ${DEPLOYDIR}
+		ln -sf ${initramfs_base_name}.bin ${initramfs_symlink_name}.bin
+	fi
 }
 do_deploy[dirs] = "${DEPLOYDIR} ${B}"
 do_deploy[prefuncs] += "package_get_auto_pr"

meta/classes/license.bbclass

@@ -68,15 +68,18 @@ license_create_manifest() {
 		if [ -n "${COPY_LIC_DIRS}" ]; then
 			for pkg in ${INSTALLED_PKGS}; do
 				mkdir -p ${IMAGE_ROOTFS}/usr/share/common-licenses/${pkg}
-				for lic in `ls ${LICENSE_DIRECTORY}/${pkg}`; do
+				pkged_pn="$(sed -n "/^PACKAGE NAME: ${pkg}$/,/^$/ \
+                                           {s/^RECIPE NAME: //; /^PACKAGE NAME:/d; /^PACKAGE VERSION:/d; /^LICENSE:/d; p}" \
+                                           ${LICENSE_MANIFEST})"
+				for lic in `ls ${LICENSE_DIRECTORY}/${pkged_pn}`; do
 					# Really don't need to copy the generics as they're 
 					# represented in the manifest and in the actual pkg licenses
 					# Doing so would make your image quite a bit larger
-					if [[ "${lic}" != "generic_"* ]]; then
-						cp ${LICENSE_DIRECTORY}/${pkg}/${lic} ${IMAGE_ROOTFS}/usr/share/common-licenses/${pkg}/${lic}
-					elif [[ "${lic}" == "generic_"* ]]; then
+					if [ "${lic#generic_}" = "${lic}" ]; then
+						cp ${LICENSE_DIRECTORY}/${pkged_pn}/${lic} ${IMAGE_ROOTFS}/usr/share/common-licenses/${pkg}/${lic}
+					else
 						if [ ! -f ${IMAGE_ROOTFS}/usr/share/common-licenses/${lic} ]; then
-							cp ${LICENSE_DIRECTORY}/${pkg}/${lic} ${IMAGE_ROOTFS}/usr/share/common-licenses/
+							cp ${LICENSE_DIRECTORY}/${pkged_pn}/${lic} ${IMAGE_ROOTFS}/usr/share/common-licenses/
 						fi
 						ln -s ../${lic} ${IMAGE_ROOTFS}/usr/share/common-licenses/${pkg}/${lic}
 					fi

meta/classes/multilib.bbclass

@@ -105,6 +105,7 @@ python __anonymous () {
     clsextend.map_variable("PACKAGE_INSTALL")
     clsextend.map_variable("INITSCRIPT_PACKAGES")
     clsextend.map_variable("USERADD_PACKAGES")
+    clsextend.map_variable("SYSTEMD_PACKAGES")
 }
 
 PACKAGEFUNCS_append = " do_package_qa_multilib"

meta/classes/nativesdk.bbclass

@@ -59,7 +59,7 @@ export PKG_CONFIG_SYSROOT_DIR = "${STAGING_DIR_HOST}"
 
 python nativesdk_virtclass_handler () {
     pn = e.data.getVar("PN", True)
-    if not pn.endswith("-nativesdk") or pn.startswith("nativesdk-"):
+    if not (pn.endswith("-nativesdk") or pn.startswith("nativesdk-")):
         return
 
     e.data.setVar("MLPREFIX", "nativesdk-")
@@ -81,6 +81,7 @@ python () {
     clsextend.map_depends_variable("DEPENDS")
     clsextend.map_packagevars()
     clsextend.map_variable("PROVIDES")
+    clsextend.map_regexp_variable("PACKAGES_DYNAMIC")
 }
 
 addhandler nativesdk_virtclass_handler

meta/classes/package.bbclass

@@ -1800,7 +1800,7 @@ python package_depchains() {
 
 # Since bitbake can't determine which variables are accessed during package
 # iteration, we need to list them here:
-PACKAGEVARS = "FILES RDEPENDS RRECOMMENDS SUMMARY DESCRIPTION RSUGGESTS RPROVIDES RCONFLICTS PKG ALLOW_EMPTY pkg_postinst pkg_postrm INITSCRIPT_NAME INITSCRIPT_PARAMS DEBIAN_NOAUTONAME ALTERNATIVE PKGE PKGV PKGR USERADD_PARAM GROUPADD_PARAM"
+PACKAGEVARS = "FILES RDEPENDS RRECOMMENDS SUMMARY DESCRIPTION RSUGGESTS RPROVIDES RCONFLICTS PKG ALLOW_EMPTY pkg_postinst pkg_postrm INITSCRIPT_NAME INITSCRIPT_PARAMS DEBIAN_NOAUTONAME ALTERNATIVE PKGE PKGV PKGR USERADD_PARAM GROUPADD_PARAM CONFFILES"
 
 def gen_packagevar(d):
     ret = []

meta/classes/package_rpm.bbclass

@@ -296,11 +296,7 @@ package_install_internal_rpm () {
 		if [ ! -z "$INSTALL_PLATFORM_EXTRA_RPM" ]; then
 			for pt in $INSTALL_PLATFORM_EXTRA_RPM ; do
 				channel_priority=$(expr $channel_priority + 5)
-				case $pt in
-					noarch-* | any-* | all-*)
-						pt=$(echo $pt | sed "s,-linux.*$,-linux\.*,")
-						;;
-				esac
+				pt=$(echo $pt | sed "s,-linux.*$,-linux\.*,")
 				echo "$pt" >> ${target_rootfs}/etc/rpm/platform
 			done
 		fi

meta/classes/pixbufcache.bbclass

@@ -65,5 +65,5 @@ pixbufcache_sstate_postinst() {
 # Packages that use this class should extend this variable with their runtime
 # dependencies.
 PIXBUFCACHE_SYSROOT_DEPS = ""
-PIXBUFCACHE_SYSROOT_DEPS_class-native = "${@['gdk-pixbuf-native:do_populate_sysroot_setscene', '']['${BPN}' == 'gdk-pixbuf']} glib-2.0-native:do_populate_sysroot_setscene libffi-native:do_populate_sysroot_setscene libpng-native:do_populate_sysroot_setscene"
+PIXBUFCACHE_SYSROOT_DEPS_class-native = "${@['gdk-pixbuf-native:do_populate_sysroot_setscene', '']['${BPN}' == 'gdk-pixbuf']} glib-2.0-native:do_populate_sysroot_setscene libffi-native:do_populate_sysroot_setscene libpng-native:do_populate_sysroot_setscene zlib-native:do_populate_sysroot_setscene"
 do_populate_sysroot_setscene[depends] += "${PIXBUFCACHE_SYSROOT_DEPS}"

meta/classes/populate_sdk_base.bbclass

@@ -253,7 +253,7 @@ if [ "$dl_path" = "" ] ; then
 	echo "SDK could not be set up. Relocate script unable to find ld-linux.so. Abort!"
 	exit 1
 fi
-executable_files=$($SUDO_EXEC find $native_sysroot -type f -perm /111)
+executable_files=$($SUDO_EXEC find $native_sysroot -type f -perm /111 -exec file '{}' \;| grep "\(executable\|dynamically linked\)" | cut -f 1 -d ':') 
 
 tdir=`mktemp -d`
 if [ x$tdir = x ] ; then

meta/classes/ptest.bbclass

@@ -10,7 +10,7 @@ PTEST_PATH ?= "${libdir}/${PN}/ptest"
 FILES_${PN}-ptest = "${PTEST_PATH}"
 SECTION_${PN}-ptest = "devel"
 ALLOW_EMPTY_${PN}-ptest = "1"
-PTEST_ENABLED = "${@base_contains("DISTRO_FEATURES", "ptest", "1", "0", d)}"
+PTEST_ENABLED = "${@base_contains('DISTRO_FEATURES', 'ptest', '1', '0', d)}"
 RDEPENDS_${PN}-ptest_virtclass-native = ""
 RDEPENDS_${PN}-ptest_virtclass-nativesdk = ""
 
@@ -57,3 +57,8 @@ do_install_ptest_base[cleandirs] = "${D}${PTEST_PATH}"
 addtask configure_ptest_base after do_configure before do_compile
 addtask compile_ptest_base   after do_compile   before do_install
 addtask install_ptest_base   after do_install   before do_package
+
+python () {
+    if not bb.data.inherits_class('native', d) and not bb.data.inherits_class('cross', d):
+        d.setVarFlag('do_install_ptest_base', 'fakeroot', 1)
+}

meta/classes/rootfs_deb.bbclass

@@ -91,8 +91,9 @@ fakeroot rootfs_deb_do_rootfs () {
 	${ROOTFS_POSTPROCESS_COMMAND}
 
 	if ${@base_contains("IMAGE_FEATURES", "read-only-rootfs", "true", "false" ,d)}; then
-		if [ -n "$(delayed_postinsts)" ]; then
-			bberror "Some packages could not be configured offline and rootfs is read-only."
+	        delayed_postinsts="$(delayed_postinsts)"
+		if [ -n "$delayed_postinsts" ]; then
+			bberror "The following packages could not be configured offline and rootfs is read-only: $delayed_postinsts"
 			exit 1
 		fi
 	fi

meta/classes/rootfs_ipk.bbclass

@@ -89,8 +89,9 @@ fakeroot rootfs_ipk_do_rootfs () {
 	${ROOTFS_POSTPROCESS_COMMAND}
 
 	if ${@base_contains("IMAGE_FEATURES", "read-only-rootfs", "true", "false" ,d)}; then
-		if [ -n "$(delayed_postinsts)" ]; then
-			bberror "Some packages could not be configured offline and rootfs is read-only."
+	        delayed_postinsts="$(delayed_postinsts)"
+		if [ -n "$delayed_postinsts" ]; then
+			bberror "The following packages could not be configured offline and rootfs is read-only: $delayed_postinsts"
 			exit 1
 		fi
 	fi

meta/classes/rootfs_rpm.bbclass

@@ -115,8 +115,9 @@ fakeroot rootfs_rpm_do_rootfs () {
 
 	if ${@base_contains("IMAGE_FEATURES", "read-only-rootfs", "true", "false" ,d)}; then
 		if [ -d ${IMAGE_ROOTFS}${sysconfdir}/rpm-postinsts ] ; then
-			if [ "`ls -A ${IMAGE_ROOTFS}${sysconfdir}/rpm-postinsts`" != "" ] ; then
-				bberror "Some packages could not be configured offline and rootfs is read-only."
+		        failed_pkgs=$(ls -A ${IMAGE_ROOTFS}${sysconfdir}/rpm-postinsts)
+			if [ -n "$failed_pkgs" ] ; then
+				bberror "The following post-install scripts could not be run offline and rootfs is read-only: $failed_pkgs"
 				exit 1
 			fi
 		fi

meta/classes/syslinux.bbclass

@@ -27,7 +27,7 @@ SYSLINUXDIR = "/"
 # a console=...some_tty...
 SYSLINUX_DEFAULT_CONSOLE ?= ""
 SYSLINUX_SERIAL ?= "0 115200"
-SYSLINUX_SERIAL_TTY ?= "ttyS0,115200"
+SYSLINUX_SERIAL_TTY ?= "console=ttyS0,115200"
 ISO_BOOTIMG = "isolinux/isolinux.bin"
 ISO_BOOTCAT = "isolinux/boot.cat"
 MKISOFS_OPTIONS = "-no-emul-boot -boot-load-size 4 -boot-info-table"

meta/classes/terminal.bbclass

@@ -64,6 +64,10 @@ def oe_terminal(command, title, d):
             envdata.setVar(key, str(value))
             envdata.setVarFlag(key, 'export', 1)
 
+    # A complex PS1 might need more escaping of chars.
+    # Lets not export PS1 instead.
+    envdata.delVar("PS1")
+
     # Replace command with an executable wrapper script
     command = emit_terminal_func(command, envdata, d)
 

meta/classes/useradd.bbclass

@@ -182,6 +182,8 @@ fakeroot python populate_packages_prepend () {
         rdepends = d.getVar("RDEPENDS_%s" % pkg, True) or ""
         rdepends += ' ' + d.getVar('MLPREFIX') + 'base-passwd'
         rdepends += ' ' + d.getVar('MLPREFIX') + 'shadow'
+        # base-files is where the default /etc/skel is packaged
+        rdepends += ' ' + d.getVar('MLPREFIX') + 'base-files'
         d.setVar("RDEPENDS_%s" % pkg, rdepends)
 
     # Add the user/group preinstall scripts and RDEPENDS requirements

meta/classes/utils.bbclass

@@ -307,11 +307,10 @@ def base_set_filespath(path, d):
     if extrapaths != "":
         path = extrapaths.split(":") + path
     # The ":" ensures we have an 'empty' override
-    overrides = (":" + (d.getVar("FILESOVERRIDES", True) or "")).split(":")
-    overrides.reverse()
-    for o in overrides:
-        for p in path:
-            if p != "": 
+    overrides = ((d.getVar("FILESOVERRIDES", True) or "") + ":").split(":")
+    for p in path:
+        if p != "": 
+            for o in overrides:
                 filespath.append(os.path.join(p, o))
     return ":".join(filespath)
 

meta/classes/vala.bbclass

@@ -1,9 +1,12 @@
 # Vala has problems with multiple concurrent invocations
 PARALLEL_MAKE = ""
 
-# Vala needs vala-native
-DEPENDS += "vala-native"
-DEPENDS_virtclass-native += "vala-native"
+# Everyone needs vala-native and targets need vala, too,
+# because that is where target builds look for .vapi files.
+#
+VALADEPENDS = ""
+VALADEPENDS_class-target = "vala"
+DEPENDS_append = " vala-native ${VALADEPENDS}"
 
 # Our patched version of Vala looks in STAGING_DATADIR for .vapi files
 export STAGING_DATADIR

meta/conf/distro/include/default-providers.inc

@@ -43,3 +43,5 @@ PREFERRED_PROVIDER_udev ?= "${@base_contains('DISTRO_FEATURES','systemd','system
 # There are issues with runtime packages and PREFERRED_PROVIDER, see YOCTO #5044 for details
 # on this rather strange entry.
 PREFERRED_PROVIDER_bluez4 ?= "bluez4"
+# Alternative is ltp-ddt in meta-oe: meta-oe/recipes-devtools/ltp-ddt/ltp-ddt_0.0.4.bb
+PREFERRED_PROVIDER_ltp ?= "ltp"

meta/files/device_table-minimal.txt

@@ -12,8 +12,8 @@
 /dev/initctl	p	600	root	root	-	-	-	-	-
 /dev/apm_bios	c	660	root	plugdev	10	134	-	-	-
 /dev/fb0	c	600	root	root	29	0	-	-	-
-/dev/hda	b	660	root	root	3	0	-	-	-
-/dev/hda	b	660	root	root	3	1	1	1	19
+/dev/hda	b	660	root	disk	3	0	-	-	-
+/dev/hda	b	660	root	disk	3	1	1	1	19
 /dev/kmem	c	640	root	kmem	1	2	-	-	-
 /dev/kmsg	c	600	root	root	1	11	-	-	-
 /dev/mem	c	640	root	kmem	1	1	-	-	-

meta/lib/oe/sstatesig.py

@@ -10,7 +10,9 @@ def sstate_rundepfilter(siggen, fn, recipename, task, dep, depname, dataCache):
         return x.startswith("nativesdk-")
     def isKernel(fn):
         inherits = " ".join(dataCache.inherits[fn])
-        return inherits.find("module-base.bbclass") != -1 or inherits.find("linux-kernel-base.bbclass") != -1
+        return inherits.find("/module-base.bbclass") != -1 or inherits.find("/linux-kernel-base.bbclass") != -1
+    def isImage(fn):
+        return "/image.bbclass" in " ".join(dataCache.inherits[fn])
 
     # Always include our own inter-task dependencies
     if recipename == depname:
@@ -32,7 +34,7 @@ def sstate_rundepfilter(siggen, fn, recipename, task, dep, depname, dataCache):
         return False
 
     # Exclude well defined machine specific configurations which don't change ABI
-    if depname in siggen.abisaferecipes:
+    if depname in siggen.abisaferecipes and not isImage(fn):
         return False
 
     # Exclude well defined recipe->dependency

meta/lib/oe/terminal.py

@@ -52,11 +52,11 @@ class XTerminal(Terminal):
             raise UnsupportedTerminal(self.name)
 
 class Gnome(XTerminal):
-    command = 'gnome-terminal --disable-factory -t "{title}" -x {command}'
+    command = 'gnome-terminal -t "{title}" -x {command}'
     priority = 2
 
 class Mate(XTerminal):
-    command = 'mate-terminal --disable-factory -t "{title}" -x {command}'
+    command = 'mate-terminal -t "{title}" -x {command}'
     priority = 2
 
 class Xfce(XTerminal):

meta/recipes-bsp/acpid/acpid.inc

@@ -6,7 +6,8 @@ LICENSE="GPLv2+"
 
 SECTION = "base"
 SRC_URI = "${SOURCEFORGE_MIRROR}/acpid/acpid-${PV}.tar.gz \
-           file://init"
+           file://init \
+           file://set_socket_noblock.patch "
 
 inherit update-rc.d
 

meta/recipes-bsp/acpid/acpid/set_socket_noblock.patch

@@ -0,0 +1,10 @@
+--- a/acpid.c
++++ b/acpid.c
+@@ -307,6 +307,7 @@ main(int argc, char **argv)
+ 				non_root_clients++;
+ 			}
+ 			fcntl(cli_fd, F_SETFD, FD_CLOEXEC);
++			fcntl(cli_fd, F_SETFL, O_NONBLOCK);
+ 			snprintf(buf, sizeof(buf)-1, "%d[%d:%d]",
+ 				creds.pid, creds.uid, creds.gid);
+ 			acpid_add_client(cli_fd, buf);

meta/recipes-bsp/apmd/apmd-3.2.2-14/apmd.service

@@ -3,5 +3,5 @@ Description=Advanced Power Management daemon
 After=remote-fs.target
 
 [Service]
-EnvironmentFile-= @SYSCONFDIR@/default/apmd
+EnvironmentFile=-@SYSCONFDIR@/default/apmd
 ExecStart=@SBINDIR@/apmd -P @SYSCONFDIR@/apm/apmd_proxy $APMD

meta/recipes-bsp/grub/grub_2.00.bb

@@ -11,7 +11,7 @@ SECTION = "bootloaders"
 LICENSE = "GPLv3"
 LIC_FILES_CHKSUM = "file://COPYING;md5=d32239bcb673463ab874e80d47fae504"
 
-DEPENDS = "autogen-native flex-native"
+DEPENDS = "autogen-native flex-native bison-native xz"
 RDEPENDS_${PN} = "diffutils freetype"
 PR = "r1"
 
@@ -37,6 +37,7 @@ inherit gettext
 
 PACKAGECONFIG ??= ""
 PACKAGECONFIG[grub-mount] = "--enable-grub-mount,--disable-grub-mount,fuse"
+PACKAGECONFIG[device-mapper] = "--enable-device-mapper,--disable-device-mapper,lvm2"
 
 EXTRA_OECONF = "--with-platform=pc --disable-grub-mkfont --program-prefix="" \
                --enable-liblzma=no --enable-device-mapper=no --enable-libzfs=no"

meta/recipes-connectivity/avahi/avahi.inc

@@ -25,6 +25,7 @@ SRC_URI = "http://avahi.org/download/avahi-${PV}.tar.gz \
           file://avahi_fix_install_issue.patch \
           file://fix_for_automake_1.12.x.patch \
           file://out-of-tree.patch \
+          file://reuseport-check.patch \
           "
 
 USERADD_PACKAGES = "avahi-daemon avahi-autoipd"
@@ -98,8 +99,8 @@ FILES_libavahi-gobject = "${libdir}/libavahi-gobject.so.*"
 FILES_avahi-utils = "${bindir}/avahi-*"
 
 # uclibc has no nss
-RRECOMMENDS_avahi-daemon_append_libc-glibc = "libnss-mdns"
-RRECOMMENDS_${PN}_append_libc-glibc = "libnss-mdns"
+RRECOMMENDS_avahi-daemon_append_libc-glibc = " libnss-mdns"
+RRECOMMENDS_${PN}_append_libc-glibc = " libnss-mdns"
 
 RRECOMMENDS_avahi-dev = "expat-dev libcap-dev libdaemon-dev dbus-dev glib-2.0-dev update-rc.d-dev"
 RRECOMMENDS_avahi-dev_append_libc-glibc = " gettext-dev"

meta/recipes-connectivity/avahi/files/reuseport-check.patch

@@ -0,0 +1,30 @@
+Fix avahi-daemon when running on kernel < 3.9 (patch taken from Ubuntu).
+
+Upstream-Status: Pending (unmaintained upstream)
+Signed-off-by: Ross Burton <ross.burton@intel.com>
+
+Description: SO_REUSEPORT may not exist in running kernel
+ When userspace defines SO_REUSEPORT we will attempt to enable socket
+ port number reuse.  However if the running kernel does not support
+ this call it will fail preventing daemon startup.  If this call is
+ present but fails ENOPROTOOPT then we know that actually the kernel
+ does not support it and we should continue as if we did not have the
+ call at all.  (LP: #1228204)
+ .
+ This patch could be removed from the debian package after jessie release.
+Author: Andy Whitcroft <apw@canonical.com>
+
+Index: avahi-0.6.31/avahi-core/socket.c
+===================================================================
+--- avahi-0.6.31.orig/avahi-core/socket.c	2013-09-20 16:36:50.000000000 +0100
++++ avahi-0.6.31/avahi-core/socket.c	2013-09-20 16:38:23.781863644 +0100
+@@ -177,7 +177,8 @@
+     yes = 1;
+     if (setsockopt(fd, SOL_SOCKET, SO_REUSEPORT, &yes, sizeof(yes)) < 0) {
+         avahi_log_warn("SO_REUSEPORT failed: %s", strerror(errno));
+-        return -1;
++        if (errno != ENOPROTOOPT)
++            return -1;
+     }
+ #endif
+ 

meta/recipes-connectivity/bluez/bluez4.inc

@@ -7,7 +7,7 @@ LIC_FILES_CHKSUM = "file://COPYING;md5=12f884d2ae1ff87c09e5b7ccc2c4ca7e \
                     file://COPYING.LIB;md5=fb504b67c50331fc78734fed90fb0e09 \
                     file://src/main.c;beginline=1;endline=24;md5=9bc54b93cd7e17bf03f52513f39f926e \
                     file://sbc/sbc.c;beginline=1;endline=25;md5=1a40781ed30d50d8639323a184aeb191"
-DEPENDS = "udev libusb dbus-glib glib-2.0 libcheck readline"
+DEPENDS = "udev libusb dbus-glib glib-2.0 libcheck readline libsndfile1"
 RDEPENDS_${PN}-dev = "bluez-hcidump"
 
 PACKAGECONFIG ??= "\

meta/recipes-connectivity/iproute2/iproute2/0001-iproute2-de-bash-scripts.patch

@@ -0,0 +1,64 @@
+Subject: [PATCH] iproute2: de-bash scripts
+
+de-bash these two scripts to make iproute2 not depend on bash.
+
+Upstream-Status: Pending
+
+Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
+
+---
+ ip/ifcfg |   15 ++++++++-------
+ ip/rtpr  |    2 +-
+ 2 files changed, 9 insertions(+), 8 deletions(-)
+
+diff --git a/ip/ifcfg b/ip/ifcfg
+index 083d9df..60bcf1f 100644
+--- a/ip/ifcfg
++++ b/ip/ifcfg
+@@ -1,12 +1,13 @@
+-#! /bin/bash
++#! /bin/sh
+ 
+ CheckForwarding () {
+-  local sbase fwd
++  local sbase fwd forwarding
+   sbase=/proc/sys/net/ipv4/conf
+   fwd=0
+   if [ -d $sbase ]; then
+     for dir in $sbase/*/forwarding; do
+-      fwd=$[$fwd + `cat $dir`]
++      forwarding=`cat $dir`
++      fwd=$(($fwd+$forwarding))
+     done
+   else
+     fwd=2
+@@ -127,12 +128,12 @@ fi
+ arping -q -A -c 1 -I $dev $ipaddr
+ noarp=$?
+ ( sleep 2 ;
+-  arping -q -U -c 1 -I $dev $ipaddr ) >& /dev/null </dev/null &
++  arping -q -U -c 1 -I $dev $ipaddr ) > /dev/null 2>&1 </dev/null &
+ 
+-ip route add unreachable 224.0.0.0/24 >& /dev/null
+-ip route add unreachable 255.255.255.255 >& /dev/null
++ip route add unreachable 224.0.0.0/24 > /dev/null 2>&1
++ip route add unreachable 255.255.255.255 > /dev/null 2>&1
+ if [ `ip link ls $dev | grep -c MULTICAST` -ge 1 ]; then
+-  ip route add 224.0.0.0/4 dev $dev scope global >& /dev/null
++  ip route add 224.0.0.0/4 dev $dev scope global > /dev/null 2>&1
+ fi
+ 
+ if [ $fwd -eq 0 ]; then
+diff --git a/ip/rtpr b/ip/rtpr
+index c3629fd..674198d 100644
+--- a/ip/rtpr
++++ b/ip/rtpr
+@@ -1,4 +1,4 @@
+-#! /bin/bash
++#! /bin/sh
+ 
+ exec tr "[\\\\]" "[
+ ]"
+-- 
+1.7.9.5
+

meta/recipes-connectivity/iproute2/iproute2_3.10.0.bb

@@ -2,6 +2,7 @@ require iproute2.inc
 
 SRC_URI = "${KERNELORG_MIRROR}/linux/utils/net/${BPN}/${BPN}-${PV}.tar.xz \
            file://configure-cross.patch \
+           file://0001-iproute2-de-bash-scripts.patch \
           "
 
 SRC_URI[md5sum] = "45fb5427fc723a0001c72b92c931ba02"

meta/recipes-connectivity/irda-utils/irda-utils-0.9.18/init

@@ -8,6 +8,10 @@
 # Short-Description: Infrared port support
 ### END INIT INFO
 
+NAME="irattach"
+test -x "$IRDA_DAEMON" || IRDA_DAEMON=/usr/sbin/irattach
+test -z "$IRATTACH_PID" && IRATTACH_PID=/var/run/irattach.pid
+
 # Source function library.
 . /etc/init.d/functions
 
@@ -49,30 +53,26 @@ fi
 
 case "$1" in
   start)
-        echo -n "Starting IrDA: "
-		irattach ${DEVICE} ${ARGS} > /dev/null 2>&1 &
-        echo "$NAME."
-        ;;
+	echo -n "Starting IrDA: $NAME"
+	start-stop-daemon --start --quiet --exec "$IRDA_DAEMON" ${DEVICE} ${ARGS} --pidfile "$IRATTACH_PID"
+	sleep 1
+	[ -f /var/run/irattach.pid ] && echo " done" || echo " fail"
+	;;
   stop)
-        echo -n "Stopping IrDA: "
-		killall irattach > /dev/null 2>&1
-        echo "$NAME."
-        ;;
+	echo "Stopping IrDA: $NAME"
+	start-stop-daemon --stop --quiet --exec "$IRDA_DAEMON" --pidfile "$IRATTACH_PID"
+	;;
   restart|force-reload)
-        echo -n "Restarting IrDA: "
-		irattach ${DEVICE} ${ARGS} > /dev/null 2>&1 &
-        sleep 1
-		killall irattach > /dev/null 2>&1
-        echo "$NAME."
-        ;;
+	$0 stop
+	$0 start
+	;;
   status)
 	status irattach
 	exit $?
 	;;
   *)
-        N=/etc/init.d/$NAME
-        echo "Usage: $N {start|stop|restart|force-reload|status}" >&2
-        exit 1
-        ;;
+	N=/etc/init.d/$NAME
+	echo "Usage: $N {start|stop|restart|force-reload|status}" >&2
+	exit 1
+	;;
 esac
-

meta/recipes-connectivity/nfs-utils/nfs-utils/nfsserver

@@ -25,6 +25,7 @@ test -r /etc/default/nfsd && . /etc/default/nfsd
 test -x "$NFS_MOUNTD" || NFS_MOUNTD=/usr/sbin/rpc.mountd
 test -x "$NFS_NFSD" || NFS_NFSD=/usr/sbin/rpc.nfsd
 test -x "$NFS_STATD" || NFS_STATD=/usr/sbin/rpc.statd
+test -z "$STATD_PID" && STATD_PID=/var/run/rpc.statd.pid
 #
 # The user mode program must also exist (it just starts the kernel
 # threads using the kernel module code).
@@ -77,6 +78,17 @@ stop_mountd(){
 #
 #nfsd
 start_nfsd(){
+        modprobe -q nfsd
+	grep -q nfsd /proc/filesystems || {
+		echo NFS daemon support not enabled in kernel
+		exit 1
+        }
+	grep -q nfsd /proc/mounts || mount -t nfsd nfsd /proc/fs/nfsd
+	grep -q nfsd /proc/mounts || {
+		echo nfsd filesystem could not be mounted at /proc/fs/nfsd
+		exit 1
+        }
+
 	echo -n "starting $1 nfsd kernel threads: "
 	start-stop-daemon --start --exec "$NFS_NFSD" -- "$@"
 	echo done
@@ -115,14 +127,12 @@ stop_nfsd(){
 #statd
 start_statd(){
 	echo -n "starting statd: "
-	start-stop-daemon --start --exec "$NFS_STATD"
+	start-stop-daemon --start --exec "$NFS_STATD" --pidfile "$STATD_PID"
 	echo done
 }
 stop_statd(){
-	# WARNING: this kills any process with the executable
-	# name 'statd'.
 	echo -n 'stopping statd: '
-	start-stop-daemon --stop --quiet --signal 1 --name statd
+	start-stop-daemon --stop --quiet --signal 1 --pidfile "$STATD_PID"
 	echo done
 }
 #----------------------------------------------------------------------
@@ -134,31 +144,26 @@ stop_statd(){
 #  restart: stops and starts mountd
 #FIXME: need to create the /var/lib/nfs/... directories
 case "$1" in
-start)	create_directories
+  start)	create_directories
 	start_nfsd "$NFS_SERVERS"
 	start_mountd
 	start_statd
 	test -r /etc/exports && exportfs -a;;
-stop)	exportfs -ua
+  stop)	exportfs -ua
 	stop_statd
 	stop_mountd
 	stop_nfsd;;
-status)
+  status)
 	status /usr/sbin/rpc.mountd
 	RETVAL=$?
 	status nfsd
 	rval=$?
 	[ $RETVAL -eq 0 ] && exit $rval
 	exit $RETVAL;;
-reload)	test -r /etc/exports && exportfs -r;;
-restart)exportfs -ua
-	stop_mountd
-	stop_statd
-	# restart does not restart the kernel threads,
-	# only the user mode processes
-	start_mountd
-	start_statd
-	test -r /etc/exports && exportfs -a;;
-*)	echo "Usage: $0 {start|stop|status|reload|restart}"
+  reload)	test -r /etc/exports && exportfs -r;;
+  restart)
+	$0 stop
+	$0 start;;
+  *)	echo "Usage: $0 {start|stop|status|reload|restart}"
 	exit 1;;
 esac

meta/recipes-connectivity/nfs-utils/nfs-utils_1.2.8.bb

@@ -9,7 +9,7 @@ LIC_FILES_CHKSUM = "file://COPYING;md5=95f3a93a5c3c7888de623b46ea085a84"
 
 # util-linux for libblkid
 DEPENDS = "libcap libnfsidmap libevent util-linux sqlite3"
-RDEPENDS_${PN} = "rpcbind"
+RDEPENDS_${PN} = "rpcbind bash"
 RRECOMMENDS_${PN} = "kernel-module-nfsd"
 
 SRC_URI = "${KERNELORG_MIRROR}/linux/utils/nfs-utils/${PV}/nfs-utils-${PV}.tar.bz2 \

meta/recipes-connectivity/openssh/openssh-6.2p2/init

@@ -97,7 +97,7 @@ case "$1" in
 
   status)
 	status /usr/sbin/sshd
-	return $?
+	exit $?
   ;;
 
   *)

meta/recipes-connectivity/openssl/openssl-1.0.1e/0001-Fix-DTLS-retransmission-from-previous-session.patch

@@ -0,0 +1,81 @@
+From 34628967f1e65dc8f34e000f0f5518e21afbfc7b Mon Sep 17 00:00:00 2001
+From: "Dr. Stephen Henson" <steve@openssl.org>
+Date: Fri, 20 Dec 2013 15:26:50 +0000
+Subject: [PATCH] Fix DTLS retransmission from previous session.
+
+Upstream-Status: Backport
+commit 34628967f1e65dc8f34e000f0f5518e21afbfc7b upstream
+
+For DTLS we might need to retransmit messages from the previous session
+so keep a copy of write context in DTLS retransmission buffers instead
+of replacing it after sending CCS. CVE-2013-6450.
+---
+ ssl/d1_both.c  |    6 ++++++
+ ssl/ssl_locl.h |    2 ++
+ ssl/t1_enc.c   |   17 +++++++++++------
+ 4 files changed, 24 insertions(+), 6 deletions(-)
+
+diff --git a/ssl/d1_both.c b/ssl/d1_both.c
+index 65ec001..7a5596a 100644
+--- a/ssl/d1_both.c
++++ b/ssl/d1_both.c
+@@ -214,6 +214,12 @@ dtls1_hm_fragment_new(unsigned long frag_len, int reassembly)
+ static void
+ dtls1_hm_fragment_free(hm_fragment *frag)
+ 	{
++
++	if (frag->msg_header.is_ccs)
++		{
++		EVP_CIPHER_CTX_free(frag->msg_header.saved_retransmit_state.enc_write_ctx);
++		EVP_MD_CTX_destroy(frag->msg_header.saved_retransmit_state.write_hash);
++		}
+ 	if (frag->fragment) OPENSSL_free(frag->fragment);
+ 	if (frag->reassembly) OPENSSL_free(frag->reassembly);
+ 	OPENSSL_free(frag);
+diff --git a/ssl/ssl_locl.h b/ssl/ssl_locl.h
+index 96ce9a7..e485907 100644
+--- a/ssl/ssl_locl.h
++++ b/ssl/ssl_locl.h
+@@ -621,6 +621,8 @@ extern SSL3_ENC_METHOD TLSv1_enc_data;
+ extern SSL3_ENC_METHOD SSLv3_enc_data;
+ extern SSL3_ENC_METHOD DTLSv1_enc_data;
+ 
++#define SSL_IS_DTLS(s) (s->method->version == DTLS1_VERSION)
++
+ #define IMPLEMENT_tls_meth_func(version, func_name, s_accept, s_connect, \
+ 				s_get_meth) \
+ const SSL_METHOD *func_name(void)  \
+diff --git a/ssl/t1_enc.c b/ssl/t1_enc.c
+index 72015f5..56db834 100644
+--- a/ssl/t1_enc.c
++++ b/ssl/t1_enc.c
+@@ -414,15 +414,20 @@ int tls1_change_cipher_state(SSL *s, int which)
+ 			s->mac_flags |= SSL_MAC_FLAG_WRITE_MAC_STREAM;
+ 			else
+ 			s->mac_flags &= ~SSL_MAC_FLAG_WRITE_MAC_STREAM;
+-		if (s->enc_write_ctx != NULL)
++		if (s->enc_write_ctx != NULL && !SSL_IS_DTLS(s))
+ 			reuse_dd = 1;
+-		else if ((s->enc_write_ctx=OPENSSL_malloc(sizeof(EVP_CIPHER_CTX))) == NULL)
++		else if ((s->enc_write_ctx=EVP_CIPHER_CTX_new()) == NULL)
+ 			goto err;
+-		else
+-			/* make sure it's intialized in case we exit later with an error */
+-			EVP_CIPHER_CTX_init(s->enc_write_ctx);
+ 		dd= s->enc_write_ctx;
+-		mac_ctx = ssl_replace_hash(&s->write_hash,NULL);
++		if (SSL_IS_DTLS(s))
++			{
++			mac_ctx = EVP_MD_CTX_create();
++			if (!mac_ctx)
++				goto err;
++			s->write_hash = mac_ctx;
++			}
++		else
++			mac_ctx = ssl_replace_hash(&s->write_hash,NULL);
+ #ifndef OPENSSL_NO_COMP
+ 		if (s->compress != NULL)
+ 			{
+-- 
+1.7.5.4
+