documentation: Updated title page notes

Updated the notes to help the user be sure they have the
right set of documents for the matching YP release.

(From yocto-docs rev: 8e112affb406731ac98f3c2e08542c5049232ff1)

Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake/doc/bitbake-user-manual/bitbake-user-manual-hello.xml

@@ -134,7 +134,7 @@
                     <ulink url="http://www.mail-archive.com/yocto@yoctoproject.org/msg09379.html">Mailing List post - The BitBake equivalent of "Hello, World!"</ulink>
                     </para></listitem>
                 <listitem><para>
-                    <ulink url="http://hambedded.org/blog/2012/11/24/from-bitbake-hello-world-to-an-image/">Hambedded Linux blog post - From Bitbake Hello World to an Image</ulink>
+                    <ulink url="https://web.archive.org/web/20150325165911/http://hambedded.org/blog/2012/11/24/from-bitbake-hello-world-to-an-image/">Hambedded Linux blog post - From Bitbake Hello World to an Image</ulink>
                     </para></listitem>
             </itemizedlist>
         </note>
@@ -269,7 +269,7 @@
                 and define some key BitBake variables.
                 For more information on the <filename>bitbake.conf</filename>,
                 see
-                <ulink url='http://hambedded.org/blog/2012/11/24/from-bitbake-hello-world-to-an-image/#an-overview-of-bitbakeconf'></ulink>
+                <ulink url='https://web.archive.org/web/20150325165911/http://hambedded.org/blog/2012/11/24/from-bitbake-hello-world-to-an-image/#an-overview-of-bitbakeconf'></ulink>
                 </para>
                 <para>Use the following commands to create the <filename>conf</filename>
                 directory in the project directory:
@@ -354,7 +354,7 @@ ERROR: Unable to parse base: ParseError in configuration INHERITs: Could not inh
                 supporting.
                 For more information on the <filename>base.bbclass</filename> file,
                 you can look at
-                <ulink url='http://hambedded.org/blog/2012/11/24/from-bitbake-hello-world-to-an-image/#tasks'></ulink>.
+                <ulink url='https://web.archive.org/web/20150325165911/http://hambedded.org/blog/2012/11/24/from-bitbake-hello-world-to-an-image/#tasks'></ulink>.
                 </para></listitem>
             <listitem><para><emphasis>Run Bitbake:</emphasis>
                 After making sure that the <filename>classes/base.bbclass</filename>
@@ -376,7 +376,7 @@ ERROR: Unable to parse base: ParseError in configuration INHERITs: Could not inh
                 Thus, this example creates and uses a layer called "mylayer".
                 <note>
                     You can find additional information on adding a layer at
-                    <ulink url='http://hambedded.org/blog/2012/11/24/from-bitbake-hello-world-to-an-image/#adding-an-example-layer'></ulink>.
+                    <ulink url='https://web.archive.org/web/20150325165911/http://hambedded.org/blog/2012/11/24/from-bitbake-hello-world-to-an-image/#adding-an-example-layer'></ulink>.
                 </note>
                 </para>
                 <para>Minimally, you need a recipe file and a layer configuration

bitbake/lib/bb/build.py

@@ -646,7 +646,7 @@ def make_stamp(task, d, file_name = None):
     for mask in cleanmask:
         for name in glob.glob(mask):
             # Preserve sigdata files in the stamps directory
-            if "sigdata" in name:
+            if "sigdata" in name or "sigbasedata" in name:
                 continue
             # Preserve taint files in the stamps directory
             if name.endswith('.taint'):

bitbake/lib/bb/checksum.py

@@ -127,13 +127,15 @@ class FileChecksumCache(MultiProcessCache):
                             checksums.extend(checksum_dir(f))
                     else:
                         checksum = checksum_file(f)
-                        checksums.append((f, checksum))
+                        if checksum:
+                            checksums.append((f, checksum))
             elif os.path.isdir(pth):
                 if not os.path.islink(pth):
                     checksums.extend(checksum_dir(pth))
             else:
                 checksum = checksum_file(pth)
-                checksums.append((pth, checksum))
+                if checksum:
+                    checksums.append((pth, checksum))
 
         checksums.sort(key=operator.itemgetter(1))
         return checksums

bitbake/lib/bb/event.py

@@ -117,22 +117,29 @@ def print_ui_queue():
     logger = logging.getLogger("BitBake")
     if not _uiready:
         from bb.msg import BBLogFormatter
-        console = logging.StreamHandler(sys.stdout)
-        console.setFormatter(BBLogFormatter("%(levelname)s: %(message)s"))
-        logger.handlers = [console]
+        stdout = logging.StreamHandler(sys.stdout)
+        stderr = logging.StreamHandler(sys.stderr)
+        formatter = BBLogFormatter("%(levelname)s: %(message)s")
+        stdout.setFormatter(formatter)
+        stderr.setFormatter(formatter)
 
         # First check to see if we have any proper messages
         msgprint = False
-        for event in ui_queue:
+        for event in ui_queue[:]:
             if isinstance(event, logging.LogRecord):
                 if event.levelno > logging.DEBUG:
+                    if event.levelno >= logging.WARNING:
+                        logger.addHandler(stderr)
+                    else:
+                        logger.addHandler(stdout)
                     logger.handle(event)
                     msgprint = True
         if msgprint:
             return
 
         # Nope, so just print all of the messages we have (including debug messages)
-        for event in ui_queue:
+        logger.addHandler(stdout)
+        for event in ui_queue[:]:
             if isinstance(event, logging.LogRecord):
                 logger.handle(event)
 

bitbake/lib/bb/fetch2/__init__.py

@@ -807,13 +807,15 @@ def runfetchcmd(cmd, d, quiet=False, cleanup=None):
                   'GIT_SSL_CAINFO',
                   'GIT_SMART_HTTP',
                   'SSH_AUTH_SOCK', 'SSH_AGENT_PID',
-                  'SOCKS5_USER', 'SOCKS5_PASSWD']
+                  'SOCKS5_USER', 'SOCKS5_PASSWD',
+                  'DBUS_SESSION_BUS_ADDRESS']
 
     if not cleanup:
         cleanup = []
 
+    origenv = d.getVar("BB_ORIGENV", False)
     for var in exportvars:
-        val = d.getVar(var, True)
+        val = d.getVar(var, True) or (origenv and origenv.getVar(var, True))
         if val:
             cmd = 'export ' + var + '=\"%s\"; %s' % (val, cmd)
 
@@ -1422,7 +1424,7 @@ class FetchMethod(object):
                     if urlpath.find("/") != -1:
                         destdir = urlpath.rsplit("/", 1)[0] + '/'
                         bb.utils.mkdirhier("%s/%s" % (unpackdir, destdir))
-                cmd = 'cp -fpPR %s %s' % (file, destdir)
+                cmd = 'cp -fpPRH %s %s' % (file, destdir)
 
         if not cmd:
             return

bitbake/lib/bb/fetch2/git.py

@@ -274,7 +274,7 @@ class Git(FetchMethod):
                 branchname =  ud.branches[ud.names[0]]
                 runfetchcmd("%s checkout -B %s %s" % (ud.basecmd, branchname, \
                             ud.revisions[ud.names[0]]), d)
-                runfetchcmd("%s branch --set-upstream %s origin/%s" % (ud.basecmd, branchname, \
+                runfetchcmd("%s branch %s --set-upstream-to origin/%s" % (ud.basecmd, branchname, \
                             branchname), d)
             else:
                 runfetchcmd("%s checkout %s" % (ud.basecmd, ud.revisions[ud.names[0]]), d)

bitbake/lib/bb/fetch2/wget.py

@@ -104,7 +104,7 @@ class Wget(FetchMethod):
 
         return True
 
-    def checkstatus(self, fetch, ud, d):
+    def checkstatus(self, fetch, ud, d, try_again=True):
         import urllib2, socket, httplib
         from urllib import addinfourl
         from bb.fetch2 import FetchConnectionCache
@@ -278,9 +278,13 @@ class Wget(FetchMethod):
             r.get_method = lambda: "HEAD"
             opener.open(r)
         except urllib2.URLError as e:
-            # debug for now to avoid spamming the logs in e.g. remote sstate searches
-            logger.debug(2, "checkstatus() urlopen failed: %s" % e)
-            return False
+            if try_again:
+                logger.debug(2, "checkstatus: trying again")
+                return self.checkstatus(fetch, ud, d, False)
+            else:
+                # debug for now to avoid spamming the logs in e.g. remote sstate searches
+                logger.debug(2, "checkstatus() urlopen failed: %s" % e)
+                return False
         return True
 
     def _parse_path(self, regex, s):

bitbake/lib/bb/siggen.py

@@ -35,6 +35,7 @@ class SignatureGenerator(object):
     name = "noop"
 
     def __init__(self, data):
+        self.basehash = {}
         self.taskhash = {}
         self.runtaskdeps = {}
         self.file_checksum_values = {}
@@ -66,11 +67,10 @@ class SignatureGenerator(object):
         return
 
     def get_taskdata(self):
-       return (self.runtaskdeps, self.taskhash, self.file_checksum_values, self.taints)
+        return (self.runtaskdeps, self.taskhash, self.file_checksum_values, self.taints, self.basehash)
 
     def set_taskdata(self, data):
-        self.runtaskdeps, self.taskhash, self.file_checksum_values, self.taints = data
-
+        self.runtaskdeps, self.taskhash, self.file_checksum_values, self.taints, self.basehash = data
 
 class SignatureGeneratorBasic(SignatureGenerator):
     """
@@ -138,7 +138,11 @@ class SignatureGeneratorBasic(SignatureGenerator):
                 var = lookupcache[dep]
                 if var is not None:
                     data = data + str(var)
-            self.basehash[fn + "." + task] = hashlib.md5(data).hexdigest()
+            datahash = hashlib.md5(data).hexdigest()
+            k = fn + "." + task
+            if k in self.basehash and self.basehash[k] != datahash:
+                bb.error("When reparsing %s, the basehash value changed from %s to %s. The metadata is not deterministic and this needs to be fixed." % (k, self.basehash[k], datahash))
+            self.basehash[k] = datahash
             taskdeps[task] = alldeps
 
         self.taskdeps[fn] = taskdeps
@@ -186,6 +190,7 @@ class SignatureGeneratorBasic(SignatureGenerator):
     def get_taskhash(self, fn, task, deps, dataCache):
         k = fn + "." + task
         data = dataCache.basetaskhash[k]
+        self.basehash[k] = data
         self.runtaskdeps[k] = []
         self.file_checksum_values[k] = []
         recipename = dataCache.pkg_fn[fn]
@@ -282,6 +287,15 @@ class SignatureGeneratorBasic(SignatureGenerator):
             if 'nostamp:' in self.taints[k]:
                 data['taint'] = self.taints[k]
 
+        computed_basehash = calc_basehash(data)
+        if computed_basehash != self.basehash[k]:
+            bb.error("Basehash mismatch %s versus %s for %s" % (computed_basehash, self.basehash[k], k))
+        if runtime and k in self.taskhash:
+            computed_taskhash = calc_taskhash(data)
+            if computed_taskhash != self.taskhash[k]:
+                bb.error("Taskhash mismatch %s versus %s for %s" % (computed_taskhash, self.taskhash[k], k))
+                sigfile = sigfile.replace(self.taskhash[k], computed_taskhash)
+
         fd, tmpfile = tempfile.mkstemp(dir=os.path.dirname(sigfile), prefix="sigtask.")
         try:
             with os.fdopen(fd, "wb") as stream:
@@ -296,15 +310,6 @@ class SignatureGeneratorBasic(SignatureGenerator):
                 pass
             raise err
 
-        computed_basehash = calc_basehash(data)
-        if computed_basehash != self.basehash[k]:
-            bb.error("Basehash mismatch %s verses %s for %s" % (computed_basehash, self.basehash[k], k))
-        if k in self.taskhash:
-            computed_taskhash = calc_taskhash(data)
-            if computed_taskhash != self.taskhash[k]:
-                bb.error("Taskhash mismatch %s verses %s for %s" % (computed_taskhash, self.taskhash[k], k))
-
-
     def dump_sigs(self, dataCache, options):
         for fn in self.taskdeps:
             for task in self.taskdeps[fn]:
@@ -545,7 +550,8 @@ def calc_taskhash(sigdata):
         data = data + sigdata['runtaskhashes'][dep]
 
     for c in sigdata['file_checksum_values']:
-        data = data + c[1]
+        if c[1]:
+            data = data + c[1]
 
     if 'taint' in sigdata:
         if 'nostamp:' in sigdata['taint']:

bitbake/lib/bb/tests/fetch.py

@@ -767,7 +767,6 @@ class FetchLatestVersionTest(FetcherTest):
 
 class FetchCheckStatusTest(FetcherTest):
     test_wget_uris = ["http://www.cups.org/software/1.7.2/cups-1.7.2-source.tar.bz2",
-                      "http://www.cups.org/software/ipptool/ipptool-20130731-linux-ubuntu-i686.tar.gz",
                       "http://www.cups.org/",
                       "http://downloads.yoctoproject.org/releases/sato/sato-engine-0.1.tar.gz",
                       "http://downloads.yoctoproject.org/releases/sato/sato-engine-0.2.tar.gz",

bitbake/lib/bs4/builder/_html5lib.py

@@ -11,7 +11,14 @@ from bs4.builder import (
     )
 from bs4.element import NamespacedAttribute
 import html5lib
+try:
+    # html5lib >= 0.99999999/1.0b9
+    from html5lib.treebuilders import base as treebuildersbase
+except ImportError:
+    # html5lib <= 0.9999999/1.0b8
+    from html5lib.treebuilders import _base as treebuildersbase
 from html5lib.constants import namespaces
+
 from bs4.element import (
     Comment,
     Doctype,
@@ -54,7 +61,7 @@ class HTML5TreeBuilder(HTMLTreeBuilder):
         return u'<html><head></head><body>%s</body></html>' % fragment
 
 
-class TreeBuilderForHtml5lib(html5lib.treebuilders._base.TreeBuilder):
+class TreeBuilderForHtml5lib(treebuildersbase.TreeBuilder):
 
     def __init__(self, soup, namespaceHTMLElements):
         self.soup = soup
@@ -92,7 +99,7 @@ class TreeBuilderForHtml5lib(html5lib.treebuilders._base.TreeBuilder):
         return self.soup
 
     def getFragment(self):
-        return html5lib.treebuilders._base.TreeBuilder.getFragment(self).element
+        return treebuildersbase.TreeBuilder.getFragment(self).element
 
 class AttrList(object):
     def __init__(self, element):
@@ -115,9 +122,9 @@ class AttrList(object):
         return name in list(self.attrs.keys())
 
 
-class Element(html5lib.treebuilders._base.Node):
+class Element(treebuildersbase.Node):
     def __init__(self, element, soup, namespace):
-        html5lib.treebuilders._base.Node.__init__(self, element.name)
+        treebuildersbase.Node.__init__(self, element.name)
         self.element = element
         self.soup = soup
         self.namespace = namespace
@@ -277,7 +284,7 @@ class Element(html5lib.treebuilders._base.Node):
 
 class TextNode(Element):
     def __init__(self, element, soup):
-        html5lib.treebuilders._base.Node.__init__(self, None)
+        treebuildersbase.Node.__init__(self, None)
         self.element = element
         self.soup = soup
 

bitbake/lib/toaster/orm/models.py

@@ -415,6 +415,7 @@ class Build(models.Model):
         # to show build progress in mrb_section.html
         for build in recent_builds:
             build.percentDone = build.completeper()
+            build.outcomeText = build.get_outcome_text()
 
         return recent_builds
 

bitbake/lib/toaster/toastergui/static/js/mrbsection.js

@@ -57,12 +57,12 @@ function mrbSectionInit(ctx){
           for (var i in prjInfo.builds){
             var build = prjInfo.builds[i];
 
-            if (build.outcome === "In Progress" ||
+            if (build.outcomeText === "In Progress" ||
                $(".progress .bar").length > 0){
               /* Update the build progress */
               var percentDone;
 
-              if (build.outcome !== "In Progress"){
+              if (build.outcomeText !== "In Progress"){
                 /* We have to ignore the value when it's Succeeded because it
                 *   goes back to 0
                 */

bitbake/lib/toaster/toastergui/views.py

@@ -2168,7 +2168,7 @@ if True:
             if 'configvarAdd' in request.POST:
                 t=request.POST['configvarAdd'].strip()
                 if ":" in t:
-                    variable, value = t.split(":")
+                    variable, value = t.split(":", 1)
                 else:
                     variable = t
                     value = ""
@@ -2178,7 +2178,7 @@ if True:
             if 'configvarChange' in request.POST:
                 t=request.POST['configvarChange'].strip()
                 if ":" in t:
-                    variable, value = t.split(":")
+                    variable, value = t.split(":", 1)
                 else:
                     variable = t
                     value = ""

bitbake/lib/toaster/toastermain/settings.py

@@ -107,9 +107,19 @@ def getDATABASE_URL():
 
 
 
-# Hosts/domain names that are valid for this site; required if DEBUG is False
-# See https://docs.djangoproject.com/en/1.5/ref/settings/#allowed-hosts
-ALLOWED_HOSTS = []
+# Update as of django 1.8.16 release, the '*' is needed to allow us to connect while running
+# on hosts without explicitly setting the fqdn for the toaster server.
+# See https://docs.djangoproject.com/en/dev/ref/settings/ for info on ALLOWED_HOSTS
+# Previously this setting was not enforced if DEBUG was set but it is now.
+# The previous behavior was such that ALLOWED_HOSTS defaulted to ['localhost','127.0.0.1','::1']
+# and if you bound to 0.0.0.0:<port #> then accessing toaster as localhost or fqdn would both work.
+# To have that same behavior, with a fqdn explicitly enabled you would set
+# ALLOWED_HOSTS= ['localhost','127.0.0.1','::1','myserver.mycompany.com'] for
+# Django >= 1.8.16. By default, we are not enforcing this restriction in
+# DEBUG mode.
+if DEBUG is True:
+    # this will allow connection via localhost,hostname, or fqdn
+    ALLOWED_HOSTS = ['*']
 
 # Local time zone for this installation. Choices can be found here:
 # http://en.wikipedia.org/wiki/List_of_tz_zones_by_name

documentation/bsp-guide/bsp-guide.xml

@@ -108,6 +108,21 @@
                 <date>April 2016</date>
                 <revremark>Released with the Yocto Project 2.1 Release.</revremark>
             </revision>
+            <revision>
+                <revnumber>2.1.1</revnumber>
+                <date>August 2016</date>
+                <revremark>Released with the Yocto Project 2.1.1 Release.</revremark>
+            </revision>
+            <revision>
+                <revnumber>2.1.2</revnumber>
+                <date>December 2016</date>
+                <revremark>Released with the Yocto Project 2.1.2 Release.</revremark>
+            </revision>
+            <revision>
+                <revnumber>2.1.3</revnumber>
+                <date>June 2017</date>
+                <revremark>Released with the Yocto Project 2.1.3 Release.</revremark>
+            </revision>
         </revhistory>
 
     <copyright>
@@ -120,12 +135,46 @@
         Permission is granted to copy, distribute and/or modify this document under
         the terms of the <ulink type="http" url="http://creativecommons.org/licenses/by-nc-sa/2.0/uk/">Creative Commons Attribution-Share Alike 2.0 UK: England &amp; Wales</ulink> as published by Creative Commons.
       </para>
-      <note>
-          For the latest version of this manual associated with this
-          Yocto Project release, see the
-          <ulink url='&YOCTO_DOCS_BSP_URL;'>Yocto Project Board Support Package (BSP) Developer's Guide</ulink>
-          from the Yocto Project website.
-      </note>
+           <note><title>Manual Notes</title>
+               <itemizedlist>
+                   <listitem><para>
+                       This version of the
+                       <emphasis>Yocto Project Board Support Package (BSP) Developer's Guide</emphasis>
+                       is for the &YOCTO_DOC_VERSION; release of the
+                       Yocto Project.
+                       To be sure you have the latest version of the manual
+                       for this release, go to the
+                       <ulink url='&YOCTO_HOME_URL;/documentation'>Yocto Project documentation page</ulink>
+                       and select the manual from that site.
+                       Manuals from the site are more up-to-date than manuals
+                       derived from the Yocto Project released TAR files.
+                       </para></listitem>
+                   <listitem><para>
+                       If you located this manual through a web search, the
+                       version of the manual might not be the one you want
+                       (e.g. the search might have returned a manual much
+                       older than the Yocto Project version with which you
+                       are working).
+                       You can see all Yocto Project major releases by
+                       visiting the
+                       <ulink url='&YOCTO_WIKI_URL;/wiki/Releases'>Releases</ulink>
+                       page.
+                       If you need a version of this manual for a different
+                       Yocto Project release, visit the
+                       <ulink url='&YOCTO_HOME_URL;/documentation'>Yocto Project documentation page</ulink>
+                       and select the manual set by using the
+                       "ACTIVE RELEASES DOCUMENTATION" or "DOCUMENTS ARCHIVE"
+                       pull-down menus.
+                       </para></listitem>
+                   <listitem><para>
+                       To report any inaccuracies or problems with this
+                       manual, send an email to the Yocto Project
+                       discussion group at
+                       <filename>yocto@yoctoproject.com</filename> or log into
+                       the freenode <filename>#yocto</filename> channel.
+                       </para></listitem>
+               </itemizedlist>
+           </note>
     </legalnotice>
 
     </bookinfo>

documentation/bsp-guide/bsp.xml

@@ -1460,27 +1460,26 @@
      Done.
 
      Which qemu architecture would you like to use? [default: i386]
-	     1) i386    (32-bit)
+     	     1) i386    (32-bit)
 	     2) x86_64  (64-bit)
 	     3) ARM     (32-bit)
 	     4) PowerPC (32-bit)
 	     5) MIPS    (32-bit)
 	     6) MIPS64  (64-bit)
      3
-     Would you like to use the default (4.1) kernel? (y/n) [default: y]
+     Would you like to use the default (4.4) kernel? (y/n) [default: y]
      Do you need a new machine branch for this BSP (the alternative is to re-use an existing branch)? [y/n] [default: y]
-     Getting branches from remote repo git://git.yoctoproject.org/linux-yocto-4.1.git...
-     Please choose a machine branch to base your new BSP branch on: [default: standard/base]
+     Getting branches from remote repo git://git.yoctoproject.org/linux-yocto-4.4.git...
+     Please choose a machine branch to base this BSP on: [default: standard/base]
 	     1) standard/arm-versatile-926ejs
 	     2) standard/base
-	     3) standard/beagleboard
-	     4) standard/beaglebone
-	     5) standard/edgerouter
-	     6) standard/fsl-mpc8315e-rdb
-	     7) standard/mti-malta32
-	     8) standard/mti-malta64
-	     9) standard/qemuarm64
-	     10) standard/qemuppc
+	     3) standard/beaglebone
+	     4) standard/edgerouter
+	     5) standard/fsl-mpc8315e-rdb
+	     6) standard/mti-malta32
+	     7) standard/mti-malta64
+	     8) standard/qemuarm64
+	     9) standard/qemuppc
      1
      Would you like SMP support? (y/n) [default: y]
      Does your BSP have a touchscreen? (y/n) [default: n]

documentation/dev-manual/dev-manual-common-tasks.xml

@@ -1567,7 +1567,7 @@
                         </note>
                         </para></listitem>
                     <listitem><para><emphasis>Using Variables: <filename>${...}</filename></emphasis> -
-                        Use the <filename>${<replaceable>varname</replaceable>}</filename> syntax to
+                        Use the <filename>${<replaceable>VARNAME</replaceable>}</filename> syntax to
                         access the contents of a variable:
                         <literallayout class='monospaced'>
      SRC_URI = "${SOURCEFORGE_MIRROR}/libpng/zlib-${PV}.tar.gz"
@@ -3726,6 +3726,230 @@
         </section>
     </section>
 
+    <section id='enabling-gobject-introspection-support'>
+        <title>Enabling GObject Introspection Support</title>
+
+        <para>
+            <ulink url='https://wiki.gnome.org/Projects/GObjectIntrospection'>GObject introspection</ulink>
+            is the standard mechanism for accessing GObject-based software
+            from runtime environments.
+            GObject is a feature of the GLib library that provides an object
+            framework for the GNOME desktop and related software.
+            GObject Introspection adds information to GObject that allows
+            objects created within it to be represented across different
+            programming languages.
+            If you want to construct GStreamer pipelines using Python, or
+            control UPnP infrastructure using Javascript and GUPnP,
+            GObject introspection is the only way to do it.
+        </para>
+
+        <para>
+            This section describes the Yocto Project support for generating
+            and packaging GObject introspection data.
+            GObject introspection data is a description of the
+            API provided by libraries built on top of GLib framework,
+            and, in particular, that framework's GObject mechanism.
+            GObject Introspection Repository (GIR) files go to
+            <filename>-dev</filename> packages,
+            <filename>typelib</filename> files go to main packages as they
+            are packaged together with libraries that are introspected.
+        </para>
+
+        <para>
+            The data is generated when building such a library, by linking
+            the library with a small executable binary that asks the library
+            to describe itself, and then executing the binary and
+            processing its output.
+        </para>
+
+        <para>
+            Generating this data in a cross-compilation environment
+            is difficult because the library is produced for the target
+            architecture, but its code needs to be executed on the build host.
+            This problem is solved with the OpenEmbedded build system by
+            running the code through QEMU, which allows precisely that.
+            Unfortunately, QEMU does not always work perfectly as mentioned
+            in the xxx section.
+        </para>
+
+        <section id='enabling-the-generation-of-introspection-data'>
+            <title>Enabling the Generation of Introspection Data</title>
+
+            <para>
+                Enabling the generation of introspection data (GIR files)
+                in your library package involves the following:
+                <orderedlist>
+                    <listitem><para>
+                        Inherit the
+                        <ulink url='&YOCTO_DOCS_REF_URL;#ref-classes-gobject-introspection'><filename>gobject-introspection</filename></ulink>
+                        class.
+                        </para></listitem>
+                    <listitem><para>
+                        Make sure introspection is not disabled anywhere in
+                        the recipe or from anything the recipe includes.
+                        Also, make sure that "gobject-introspection-data" is
+                        not in
+                        <ulink url='&YOCTO_DOCS_REF_URL;#var-DISTRO_FEATURES_BACKFILL_CONSIDERED'><filename>DISTRO_FEATURES_BACKFILL_CONSIDERED</filename></ulink>
+                        and that "qemu-usermode" is not in
+                        <ulink url='&YOCTO_DOCS_REF_URL;#var-MACHINE_FEATURES_BACKFILL_CONSIDERED'><filename>MACHINE_FEATURES_BACKFILL_CONSIDERED</filename></ulink>.
+                        If either of these conditions exist, nothing will
+                        happen.
+                        </para></listitem>
+                    <listitem><para>
+                        Try to build the recipe.
+                        If you encounter build errors that look like
+                        something is unable to find
+                        <filename>.so</filename> libraries, check where these
+                        libraries are located in the source tree and add
+                        the following to the recipe:
+                        <literallayout class='monospaced'>
+     GIR_EXTRA_LIBS_PATH = "${B}/<replaceable>something</replaceable>/.libs"
+                        </literallayout>
+                        <note>
+                            See recipes in the <filename>oe-core</filename>
+                            repository that use that
+                            <filename>GIR_EXTRA_LIBS_PATH</filename> variable
+                            as an example.
+                        </note>
+                        </para></listitem>
+                    <listitem><para>
+                        Look for any other errors, which probably mean that
+                        introspection support in a package is not entirely
+                        standard, and thus breaks down in a cross-compilation
+                        environment.
+                        For such cases, custom-made fixes are needed.
+                        A good place to ask and receive help in these cases
+                        is the
+                        <ulink url='&YOCTO_DOCS_REF_URL;#resources-mailinglist'>Yocto Project mailing lists</ulink>.
+                        </para></listitem>
+                </orderedlist>
+                <note>
+                    Using a library that no longer builds against the latest
+                    Yocto Project release and prints introspection related
+                    errors is a good candidate for the previous procedure.
+                </note>
+            </para>
+        </section>
+
+        <section id='disabling-the-generation-of-introspection-data'>
+            <title>Disabling the Generation of Introspection Data</title>
+
+            <para>
+                You might find that you do not want to generate
+                introspection data.
+                Or, perhaps QEMU does not work on your build host and
+                target architecture combination.
+                If so, you can use either of the following methods to
+                disable GIR file generations:
+                <itemizedlist>
+                    <listitem><para>
+                        Add the following to your distro configuration:
+                        <literallayout class='monospaced'>
+     DISTRO_FEATURES_BACKFILL_CONSIDERED = "gobject-introspection-data"
+                        </literallayout>
+                        Adding this statement disables generating
+                        introspection data using QEMU but will still enable
+                        building introspection tools and libraries
+                        (i.e. building them does not require the use of QEMU).
+                        </para></listitem>
+                    <listitem><para>
+                        Add the following to your machine configuration:
+                        <literallayout class='monospaced'>
+     MACHINE_FEATURES_BACKFILL_CONSIDERED = "qemu-usermode"
+                        </literallayout>
+                        Adding this statement disables the use of QEMU
+                        when building packages for your machine.
+                        Currently, this feature is used only by introspection
+                        recipes and has the same effect as the previously
+                        described option.
+                        <note>
+                            Future releases of the Yocto Project might have
+                            other features affected by this option.
+                        </note>
+                        </para></listitem>
+                </itemizedlist>
+                If you disable introspection data, you can still
+                obtain it through other means such as copying the data
+                from a suitable sysroot, or by generating it on the
+                target hardware.
+                The OpenEmbedded build system does not currently
+                provide specific support for these techniques.
+            </para>
+        </section>
+
+        <section id='testing-that-introspection-works-in-an-image'>
+            <title>Testing that Introspection Works in an Image</title>
+
+            <para>
+                Use the following procedure to test if generating
+                introspection data is working in an image:
+                <orderedlist>
+                    <listitem><para>
+                        Make sure that "gobject-introspection-data" is not in
+                        <ulink url='&YOCTO_DOCS_REF_URL;#var-DISTRO_FEATURES_BACKFILL_CONSIDERED'><filename>DISTRO_FEATURES_BACKFILL_CONSIDERED</filename></ulink>
+                        and that "qemu-usermode" is not in
+                        <ulink url='&YOCTO_DOCS_REF_URL;#var-MACHINE_FEATURES_BACKFILL_CONSIDERED'><filename>MACHINE_FEATURES_BACKFILL_CONSIDERED</filename></ulink>.
+                        </para></listitem>
+                    <listitem><para>
+                        Build <filename>core-image-sato</filename>.
+                        </para></listitem>
+                    <listitem><para>
+                        Launch a Terminal and then start Python in the
+                        terminal.
+                        </para></listitem>
+                    <listitem><para>
+                        Enter the following in the terminal:
+                        <literallayout class='monospaced'>
+     >>> from gi.repository import GLib
+     >>> GLib.get_host_name()
+                        </literallayout>
+                        </para></listitem>
+                    <listitem><para>
+                        For something a little more advanced, enter the
+                        following:
+                        <literallayout class='monospaced'>
+     http://python-gtk-3-tutorial.readthedocs.org/en/latest/introduction.html
+                        </literallayout>
+                        </para></listitem>
+                </orderedlist>
+            </para>
+        </section>
+
+        <section id='known-issues'>
+            <title>Known Issues</title>
+
+            <para>
+                The following know issues exist for
+                GObject Introspection Support:
+                <itemizedlist>
+                    <listitem><para>
+                        <filename>qemu-ppc64</filename> immediately crashes.
+                        Consequently, you cannot build introspection data on
+                        that architecture.
+                        </para></listitem>
+                    <listitem><para>
+                        x32 is not supported by QEMU.
+                        Consequently, introspection data is disabled.
+                        </para></listitem>
+                    <listitem><para>
+                        musl causes transient GLib binaries to crash on
+                        assertion failures.
+                        Consequently, generating introspection data is
+                        disabled.
+                        </para></listitem>
+                    <listitem><para>
+                        Because QEMU is not able to run the binaries correctly,
+                        introspection is disabled for some specific packages
+                        under specific architectures (e.g.
+                        <filename>gcr</filename>,
+                        <filename>libsecret</filename>, and
+                        <filename>webkit</filename>).
+                        </para></listitem>
+                </itemizedlist>
+            </para>
+        </section>
+    </section>
+
     <section id='dev-optionally-using-an-external-toolchain'>
         <title>Optionally Using an External Toolchain</title>
 
@@ -3802,10 +4026,10 @@
 	        it is based on is by definition incomplete.
             Its purpose is to allow the generation of customized images,
             and as such was designed to be completely extensible through a
-            plugin interface.
+            plug-in interface.
             See the
-            "<link linkend='openembedded-kickstart-plugins'>Plugins</link>"
-            section for information on these plugins.
+            "<link linkend='openembedded-kickstart-plugins'>Plug-ins</link>"
+            section for information on these plug-ins.
 	    </para>
 
         <para>
@@ -4367,21 +4591,21 @@
         </section>
 
         <section id='openembedded-kickstart-plugins'>
-            <title>Plugins</title>
+            <title>Plug-ins</title>
 
             <para>
-	            Plugins allow <filename>wic</filename> functionality to
+	            Plug-ins allow <filename>wic</filename> functionality to
 	            be extended and specialized by users.
                 This section documents the plugin interface, which is
-                currently restricted to source plugins.
+                currently restricted to source plug ins.
             </para>
 
             <para>
-	            Source plugins provide a mechanism to customize
+	            Source plug ins provide a mechanism to customize
 	            various aspects of the image generation process in
 	            <filename>wic</filename>, mainly the contents of
 	            partitions.
-	            The plugins provide a mechanism for mapping values
+	            The plug ins provide a mechanism for mapping values
 	            specified in <filename>.wks</filename> files using the
 	            <filename>--source</filename> keyword to a
                 particular plugin implementation that populates a
@@ -6936,26 +7160,29 @@
                 </para>
 
                 <para>
-                    If a committed change results in changing the package output,
-                    then the value of the PR variable needs to be increased
-                    (or "bumped") as part of that commit.
+                    If a committed change results in changing the package
+                    output, then the value of the PR variable needs to be
+                    increased (or "bumped") as part of that commit.
                     For new recipes you should add the <filename>PR</filename>
-                    variable and set its initial value equal to "r0", which is the default.
-                    Even though the default value is "r0", the practice of adding it to a new recipe makes
-                    it harder to forget to bump the variable when you make changes
-                    to the recipe in future.
+                    variable and set its initial value equal to "r0", which is
+                    the default.
+                    Even though the default value is "r0", the practice of
+                    adding it to a new recipe makes it harder to forget to bump
+                    the variable when you make changes to the recipe in future.
                 </para>
 
                 <para>
-                    If you are sharing a common <filename>.inc</filename> file with multiple recipes,
-                    you can also use the
+                    If you are sharing a common <filename>.inc</filename> file
+                    with multiple recipes, you can also use the
                     <filename><ulink url='&YOCTO_DOCS_REF_URL;#var-INC_PR'>INC_PR</ulink></filename>
-                    variable to ensure that
-                    the recipes sharing the <filename>.inc</filename> file are rebuilt when the
+                    variable to ensure that the recipes sharing the
+                    <filename>.inc</filename> file are rebuilt when the
                     <filename>.inc</filename> file itself is changed.
-                    The <filename>.inc</filename> file must set <filename>INC_PR</filename>
-                    (initially to "r0"), and all recipes referring to it should set <filename>PR</filename>
-                    to "$(INC_PR).0" initially, incrementing the last number when the recipe is changed.
+                    The <filename>.inc</filename> file must set
+                    <filename>INC_PR</filename> (initially to "r0"), and all
+                    recipes referring to it should set <filename>PR</filename>
+                    to "${INC_PR}.0" initially, incrementing the last number
+                    when the recipe is changed.
                     If the <filename>.inc</filename> file is changed then its
                     <filename>INC_PR</filename> should be incremented.
                 </para>
@@ -6964,14 +7191,14 @@
                     When upgrading the version of a package, assuming the
                     <filename><ulink url='&YOCTO_DOCS_REF_URL;#var-PV'>PV</ulink></filename>
                     changes, the <filename>PR</filename> variable should be
-                    reset to "r0" (or "$(INC_PR).0" if you are using
+                    reset to "r0" (or "${INC_PR}.0" if you are using
                     <filename>INC_PR</filename>).
                 </para>
 
                 <para>
                     Usually, version increases occur only to packages.
-                    However, if for some reason <filename>PV</filename> changes but does not
-                    increase, you can increase the
+                    However, if for some reason <filename>PV</filename> changes
+                    but does not increase, you can increase the
                     <filename><ulink url='&YOCTO_DOCS_REF_URL;#var-PE'>PE</ulink></filename>
                     variable (Package Epoch).
                     The <filename>PE</filename> variable defaults to "0".
@@ -6981,7 +7208,8 @@
                     Version numbering strives to follow the
                     <ulink url='http://www.debian.org/doc/debian-policy/ch-controlfields.html'>
                     Debian Version Field Policy Guidelines</ulink>.
-                    These guidelines define how versions are compared and what "increasing" a version means.
+                    These guidelines define how versions are compared and what
+                    "increasing" a version means.
                 </para>
             </section>
         </section>
@@ -7304,27 +7532,48 @@
                 <title>Build Considerations</title>
 
                 <para>
-                    This section describes build considerations that you need
-                    to be aware of in order to provide support for runtime
+                    This section describes build considerations of which you
+                    need to be aware in order to provide support for runtime
                     package management.
                 </para>
 
                 <para>
-                    When BitBake generates packages it needs to know
+                    When BitBake generates packages, it needs to know
                     what format or formats to use.
                     In your configuration, you use the
                     <ulink url='&YOCTO_DOCS_REF_URL;#var-PACKAGE_CLASSES'><filename>PACKAGE_CLASSES</filename></ulink>
-                    variable to specify the format.
-                    <note>
-                        You can choose to have more than one format but you must
-                        provide at least one.
-                    </note>
+                    variable to specify the format:
+                    <orderedlist>
+                        <listitem><para>
+                            Open the <filename>local.conf</filename> file
+                            inside your
+                            <link linkend='build-directory'>Build Directory</link>
+                            (e.g. <filename>~/poky/build/conf/local.conf</filename>).
+                            </para></listitem>
+                        <listitem><para>
+                            Select the desired package format as follows:
+                            <literallayout class='monospaced'>
+     PACKAGE_CLASSES ?= “package_<replaceable>packageformat</replaceable>”
+                            </literallayout>
+                            where <replaceable>packageformat</replaceable>
+                            can be "ipk", "rpm", and "deb", which are the
+                            supported package formats.
+                            <note>
+                                Because the Yocto Project supports three
+                                different package formats, you can set the
+                                variable with more than one argument.
+                                However, the OpenEmbedded build system only
+                                uses the first argument when creating an image
+                                or Software Development Kit (SDK).
+                            </note>
+                            </para></listitem>
+                    </orderedlist>
                 </para>
 
                 <para>
                     If you would like your image to start off with a basic
-                    package database of the packages in your current build
-                    as well as have the relevant tools available on the
+                    package database containing the packages in your current
+                    build as well as to have the relevant tools available on the
                     target for runtime package management, you can include
                     "package-management" in the
                     <ulink url='&YOCTO_DOCS_REF_URL;#var-IMAGE_FEATURES'><filename>IMAGE_FEATURES</filename></ulink>
@@ -7359,27 +7608,33 @@
                     <literallayout class='monospaced'>
     $ bitbake <replaceable>some-package</replaceable> package-index
                     </literallayout>
-                    This is because BitBake does not properly schedule the
-                    <filename>package-index</filename> target fully after any
-                    other target has completed.
+                    The reason for this restriction is because BitBake does not
+                    properly schedule the <filename>package-index</filename>
+                    target fully after any other target has completed.
                     Thus, be sure to run the package update step separately.
                 </para>
 
                 <para>
-                    As described below in the
-                    "<link linkend='runtime-package-management-target-ipk'>Using IPK</link>"
-                    section, if you are using IPK as your package format, you
-                    can make use of the
-                    <filename>distro-feed-configs</filename> recipe provided
-                    by <filename>meta-oe</filename> in order to configure your
-                    target to use your IPK databases.
+                    You can use the
+                    <ulink url='&YOCTO_DOCS_REF_URL;#var-PACKAGE_FEED_ARCHS'><filename>PACKAGE_FEED_ARCHS</filename></ulink>,
+                    <ulink url='&YOCTO_DOCS_REF_URL;#var-PACKAGE_FEED_BASE_PATHS'><filename>PACKAGE_FEED_BASE_PATHS</filename></ulink>,
+                    and
+                    <ulink url='&YOCTO_DOCS_REF_URL;#var-PACKAGE_FEED_URIS'><filename>PACKAGE_FEED_URIS</filename></ulink>
+                    variables to pre-configure target images to use a package
+                    feed.
+                    If you do not define these variables, then manual steps
+                    as described in the subsequent sections are necessary to
+                    configure the target.
+                    You should set these variables before building the image
+                    in order to produce a correctly configured image.
                 </para>
 
                 <para>
                     When your build is complete, your packages reside in the
-                    <filename>${TMPDIR}/deploy/<replaceable>package-format</replaceable></filename>
+                    <filename>${TMPDIR}/deploy/<replaceable>packageformat</replaceable></filename>
                     directory.
-                    For example, if <filename>${TMPDIR}</filename>
+                    For example, if
+                    <filename>${</filename><ulink url='&YOCTO_DOCS_REF_URL;#var-TMPDIR'><filename>TMPDIR</filename></ulink><filename>}</filename>
                     is <filename>tmp</filename> and your selected package type
                     is IPK, then your IPK packages are available in
                     <filename>tmp/deploy/ipk</filename>.
@@ -7390,121 +7645,38 @@
                 <title>Host or Server Machine Setup</title>
 
                 <para>
-                    Typically, packages are served from a server using
-                    HTTP.
-                    However, other protocols are possible.
-                    If you want to use HTTP, then setup and configure a
-                    web server, such as Apache 2 or lighttpd, on the machine
-                    serving the packages.
+                    Although other protocols are possible, a server using HTTP
+                    typically serves packages.
+                    If you want to use HTTP, then set up and configure a
+                    web server such as Apache 2, lighttpd, or
+                    SimpleHTTPServer on the machine serving the packages.
                 </para>
 
                 <para>
-                    As previously mentioned, the build machine can act as the
-                    package server.
-                    In the following sections that describe server machine
-                    setups, the build machine is assumed to also be the server.
+                    To keep things simple, this section describes how to set
+                    up a SimpleHTTPServer web server to share package feeds
+                    from the developer's machine.
+                    Although this server might not be the best for a production
+                    environment, the setup is simple and straight forward.
+                    Should you want to use a different server more suited for
+                    production (e.g. Apache 2, Lighttpd, or Nginx), take the
+                    appropriate steps to do so.
                 </para>
 
-                <section id='package-server-apache'>
-                    <title>Serving Packages via Apache 2</title>
-
-                    <para>
-                        This example assumes you are using the Apache 2
-                        server:
-                        <orderedlist>
-                            <listitem><para>
-                                Add the directory to your Apache
-                                configuration, which you can find at
-                                <filename>/etc/httpd/conf/httpd.conf</filename>.
-                                Use commands similar to these on the
-                                development system.
-                                These example commands assume a top-level
-                                <link linkend='source-directory'>Source Directory</link>
-                                named <filename>poky</filename> in your home
-                                directory.
-                                The example also assumes an RPM package type.
-                                If you are using a different package type, such
-                                as IPK, use "ipk" in the pathnames:
-                                <literallayout class='monospaced'>
-     &lt;VirtualHost *:80&gt;
-       ....
-         Alias /rpm ~/poky/build/tmp/deploy/rpm
-         &lt;Directory "~/poky/build/tmp/deploy/rpm"&gt;
-           Options +Indexes
-         &lt;/Directory&gt;
-     &lt;/VirtualHost&gt;
-                                </literallayout></para></listitem>
-                            <listitem><para>
-                                Reload the Apache configuration as described
-                                in this step.
-                                For all commands, be sure you have root
-                                privileges.
-                                </para>
-
-                                <para>
-                                If your development system is using Fedora or
-                                CentOS, use the following:
-                                <literallayout class='monospaced'>
-     # service httpd reload
-                                </literallayout>
-                                For Ubuntu and Debian, use the following:
-                                <literallayout class='monospaced'>
-     # /etc/init.d/apache2 reload
-                                </literallayout>
-                                For OpenSUSE, use the following:
-                                <literallayout class='monospaced'>
-     # /etc/init.d/apache2 reload
-                                </literallayout></para></listitem>
-                            <listitem><para>
-                                If you are using Security-Enhanced Linux
-                                (SELinux), you need to label the files as
-                                being accessible through Apache.
-                                Use the following command from the development
-                                host.
-                                This example assumes RPM package types:
-                                <literallayout class='monospaced'>
-     # chcon -R -h -t httpd_sys_content_t tmp/deploy/rpm
-                                </literallayout></para></listitem>
-                        </orderedlist>
-                    </para>
-                </section>
-
-                <section id='package-server-lighttpd'>
-                    <title>Serving Packages via lighttpd</title>
-
-                    <para>
-                        If you are using lighttpd, all you need
-                        to do is to provide a link from your
-                        <filename>${TMPDIR}/deploy/<replaceable>package-format</replaceable></filename>
-                        directory to lighttpd's document-root.
-                        You can determine the specifics of your lighttpd
-                        installation by looking through its configuration file,
-                        which is usually found at:
-                        <filename>/etc/lighttpd/lighttpd.conf</filename>.
-                    </para>
-
-                    <para>
-                        For example, if you are using IPK, lighttpd's
-                        document-root is set to
-                        <filename>/var/www/lighttpd</filename>, and you had
-                        packages for a target named "BOARD",
-                        then you might create a link from your build location
-                        to lighttpd's document-root as follows:
-                        <literallayout class='monospaced'>
-    # ln -s $(PWD)/tmp/deploy/ipk /var/www/lighttpd/BOARD-dir
-                        </literallayout>
-                    </para>
-
-                    <para>
-                        At this point, you need to start the lighttpd server.
-                        The method used to start the server varies by
-                        distribution.
-                        However, one basic method that starts it by hand is:
-                        <literallayout class='monospaced'>
-    # lighttpd -f /etc/lighttpd/lighttpd.conf
-                        </literallayout>
-                    </para>
-                </section>
+                <para>
+                    From within the build directory where you have built an
+                    image based on your packaging choice (i.e. the
+                    <ulink url='&YOCTO_DOCS_REF_URL;#var-PACKAGE_CLASSES'><filename>PACKAGE_CLASSES</filename></ulink>
+                    setting), simply start the server.
+                    The following example assumes a build directory of
+                    <filename>~/poky/build/tmp/deploy/rpm</filename> and a
+                    <filename>PACKAGE_CLASSES</filename> setting of
+                    "package_rpm":
+                    <literallayout class='monospaced'>
+     $ cd ~/poky/build/tmp/deploy/rpm
+     $ python -m SimpleHTTPServer
+                    </literallayout>
+                </para>
             </section>
 
             <section id='runtime-package-management-target'>
@@ -7513,42 +7685,46 @@
                 <para>
                     Setting up the target differs depending on the
                     package management system.
-                    This section provides information for RPM and IPK.
+                    This section provides information for RPM, IPK, and DEB.
                 </para>
 
                 <section id='runtime-package-management-target-rpm'>
                     <title>Using RPM</title>
 
                     <para>
-                        The application for performing runtime package
-                        management of RPM packages on the target is called
-                        <filename>smart</filename>.
+                        The <filename>smart</filename> application performs
+                        runtime package management of RPM packages.
+                        You must perform an initial setup for
+                        <filename>smart</filename> on the target machine
+                        if the
+                        <ulink url='&YOCTO_DOCS_REF_URL;#var-PACKAGE_FEED_ARCHS'><filename>PACKAGE_FEED_ARCHS</filename></ulink>,
+                        <ulink url='&YOCTO_DOCS_REF_URL;#var-PACKAGE_FEED_BASE_PATHS'><filename>PACKAGE_FEED_BASE_PATHS</filename></ulink>, and
+                        <ulink url='&YOCTO_DOCS_REF_URL;#var-PACKAGE_FEED_URIS'><filename>PACKAGE_FEED_URIS</filename></ulink>
+                        variables have not been set or the target image was
+                        built before the variables were set.
                     </para>
 
                     <para>
-                        On the target machine, you need to inform
-                        <filename>smart</filename> of every package database
-                        you want to use.
-                        As an example, suppose your target device can use the
-                        following three package databases from a server named
-                        <filename>server.name</filename>:
+                        As an example, assume the target is able to use the
+                        following package databases:
                         <filename>all</filename>, <filename>i586</filename>,
-                        and <filename>qemux86</filename>.
-                        Given this example, issue the following commands on the
-                        target:
+                        and <filename>qemux86</filename> from a server named
+                        <filename>my.server</filename>.
+                        You must inform <filename>smart</filename> of the
+                        availability of these databases by issuing the
+                        following commands on the target:
                         <literallayout class='monospaced'>
-     # smart channel --add all type=rpm-md baseurl=http://server.name/rpm/all
-     # smart channel --add i585 type=rpm-md baseurl=http://server.name/rpm/i586
-     # smart channel --add qemux86 type=rpm-md baseurl=http://server.name/rpm/qemux86
+     # smart channel --add i585 type=rpm-md baseurl=http://my.server/rpm/i586
+     # smart channel --add qemux86 type=rpm-md baseurl=http://my.server/rpm/qemux86
+     # smart channel --add all type=rpm-md baseurl=http://my.server/rpm/all
                         </literallayout>
-                        Also from the target machine, fetch the repository
-                        information using this command:
+                        From the target machine, fetch the repository:
                         <literallayout class='monospaced'>
      # smart update
                         </literallayout>
-                        You can now use the <filename>smart query</filename>
-                        and <filename>smart install</filename> commands to
-                        find and install packages from the repositories.
+                        After everything is set up, <filename>smart</filename>
+                        is able to find, install, and upgrade packages from
+                        the specified repository.
                     </para>
                 </section>
 
@@ -7556,61 +7732,99 @@
                     <title>Using IPK</title>
 
                     <para>
-                        The application for performing runtime package
-                        management of IPK packages on the target is called
-                        <filename>opkg</filename>.
+                        The <filename>opkg</filename> application performs
+                        runtime package management of IPK packages.
+                        You must perform an initial setup for
+                        <filename>opkg</filename> on the target machine
+                        if the
+                        <ulink url='&YOCTO_DOCS_REF_URL;#var-PACKAGE_FEED_ARCHS'><filename>PACKAGE_FEED_ARCHS</filename></ulink>,
+                        <ulink url='&YOCTO_DOCS_REF_URL;#var-PACKAGE_FEED_BASE_PATHS'><filename>PACKAGE_FEED_BASE_PATHS</filename></ulink>, and
+                        <ulink url='&YOCTO_DOCS_REF_URL;#var-PACKAGE_FEED_URIS'><filename>PACKAGE_FEED_URIS</filename></ulink>
+                        variables have not been set or the target image was
+                        built before the variables were set.
                     </para>
 
                     <para>
-                        In order to inform <filename>opkg</filename> of the
-                        package databases you want to use, simply create one
-                        or more <filename>*.conf</filename> files in the
-                        <filename>/etc/opkg</filename> directory on the target.
-                        The <filename>opkg</filename> application uses them
-                        to find its available package databases.
-                        As an example, suppose you configured your HTTP server
-                        on your machine named
-                        <filename>www.mysite.com</filename> to serve files
-                        from a <filename>BOARD-dir</filename> directory under
-                        its document-root.
-                        In this case, you might create a configuration
-                        file on the target called
-                        <filename>/etc/opkg/base-feeds.conf</filename> that
-                        contains:
+                        The <filename>opkg</filename> application uses
+                        configuration files to find available package
+                        databases.
+                        Thus, you need to create a configuration file inside
+                        the <filename>/etc/opkg/</filename> direction, which
+                        informs <filename>opkg</filename> of any repository
+                        you want to use.
+                    </para>
+
+                    <para>
+                        As an example, suppose you are serving packages from a
+                        <filename>ipk/</filename> directory containing the
+                        <filename>i586</filename>,
+                        <filename>all</filename>, and
+                        <filename>qemux86</filename> databases through an
+                        HTTP server named <filename>my.server</filename>.
+                        On the target, create a configuration file
+                        (e.g. <filename>my_repo.conf</filename>) inside the
+                        <filename>/etc/opkg/</filename> directory containing
+                        the following:
                         <literallayout class='monospaced'>
-     src/gz all http://www.mysite.com/BOARD-dir/all
-     src/gz armv7a http://www.mysite.com/BOARD-dir/armv7a
-     src/gz beaglebone http://www.mysite.com/BOARD-dir/beaglebone
+     src/gz all http://my.server/ipk/all
+     src/gz i586 http://my.server/ipk/i586
+     src/gz qemux86 http://my.server/ipk/qemux86
                         </literallayout>
-                    </para>
-
-                    <para>
-                        As a way of making it easier to generate and make
-                        these IPK configuration files available on your
-                        target, simply define
-                        <ulink url='&YOCTO_DOCS_REF_URL;#var-FEED_DEPLOYDIR_BASE_URI'><filename>FEED_DEPLOYDIR_BASE_URI</filename></ulink>
-                        to point to your server and the location within the
-                        document-root which contains the databases.
-                        For example: if you are serving your packages over
-                        HTTP, your server's IP address is 192.168.7.1, and
-                        your databases are located in a directory called
-                        <filename>BOARD-dir</filename> underneath your HTTP
-                        server's document-root, you need to set
-                        <filename>FEED_DEPLOYDIR_BASE_URI</filename> to
-                        <filename>http://192.168.7.1/BOARD-dir</filename> and
-                        a set of configuration files will be generated for you
-                        in your target to work with this feed.
-                    </para>
-
-                    <para>
-                        On the target machine, fetch (or refresh) the
-                        repository information using this command:
+                        Next, instruct <filename>opkg</filename> to fetch
+                        the repository information:
                         <literallayout class='monospaced'>
      # opkg update
                         </literallayout>
-                        You can now use the <filename>opkg list</filename> and
-                        <filename>opkg install</filename> commands to find and
-                        install packages from the repositories.
+                        The <filename>opkg</filename> application is now able
+                        to find, install, and upgrade packages from the
+                        specified repository.
+                    </para>
+                </section>
+
+                <section id='runtime-package-management-target-deb'>
+                    <title>Using DEB</title>
+
+                    <para>
+                        The <filename>apt</filename> application performs
+                        runtime package management of DEB packages.
+                        This application uses a source list file to find
+                        available package databases.
+                        You must perform an initial setup for
+                        <filename>apt</filename> on the target machine
+                        if the
+                        <ulink url='&YOCTO_DOCS_REF_URL;#var-PACKAGE_FEED_ARCHS'><filename>PACKAGE_FEED_ARCHS</filename></ulink>,
+                        <ulink url='&YOCTO_DOCS_REF_URL;#var-PACKAGE_FEED_BASE_PATHS'><filename>PACKAGE_FEED_BASE_PATHS</filename></ulink>, and
+                        <ulink url='&YOCTO_DOCS_REF_URL;#var-PACKAGE_FEED_URIS'><filename>PACKAGE_FEED_URIS</filename></ulink>
+                        variables have not been set or the target image was
+                        built before the variables were set.
+                    </para>
+
+                    <para>
+                        To inform <filename>apt</filename> of the repository
+                        you want to use, you might create a list file (e.g.
+                        <filename>my_repo.list</filename>) inside the
+                        <filename>/etc/apt/sources.list.d/</filename>
+                        directory.
+                        As an example, suppose you are serving packages from a
+                        <filename>deb/</filename> directory containing the
+                        <filename>i586</filename>,
+                        <filename>all</filename>, and
+                        <filename>qemux86</filename> databases through an
+                        HTTP server named <filename>my.server</filename>.
+                        The list file should contain:
+                        <literallayout class='monospaced'>
+     deb http://my.server/deb/all ./
+     deb http://my.server/deb/i586 ./
+     deb http://my.server/deb/qemux86 ./
+                        </literallayout>
+                        Next, instruct the <filename>apt</filename>
+                        application to fetch the repository information:
+                        <literallayout class='monospaced'>
+     # apt-get update
+                        </literallayout>
+                        After this step, <filename>apt</filename> is able
+                        to find, install, and upgrade packages from the
+                        specified repository.
                     </para>
                 </section>
             </section>
@@ -8974,18 +9188,17 @@
                 in your <filename>local.conf</filename> file.
                 Be sure to provide the IP address you need:
                 <literallayout class='monospaced'>
-     TEST_EXPORT_ONLY = "1"
-     TEST_TARGET = "simpleremote"
+     INHERIT +="testexport"
      TEST_TARGET_IP = "192.168.7.2"
      TEST_SERVER_IP = "192.168.7.1"
                 </literallayout>
                 You can then export the tests with the following:
                 <literallayout class='monospaced'>
-     $ bitbake core-image-sato -c testimage
+     $ bitbake core-image-sato -c testexport
                 </literallayout>
                 Exporting the tests places them in the
                 <link linkend='build-directory'>Build Directory</link> in
-                <filename>tmp/testimage/core-image-sato</filename>, which
+                <filename>tmp/testexport/core-image-sato</filename>, which
                 is controlled by the
                 <filename>TEST_EXPORT_DIR</filename> variable.
             </para>
@@ -8993,37 +9206,9 @@
             <para>
                 You can now run the tests outside of the build environment:
                 <literallayout class='monospaced'>
-     $ cd tmp/testimage/core-image-sato
+     $ cd tmp/testexport/core-image-sato
      $ ./runexported.py testdata.json
                 </literallayout>
-                <note>
-                    This "export" feature does not deploy or boot the target
-                    image.
-                    Your target (be it a Qemu or hardware one)
-                    has to already be up and running when you call
-                    <filename>runexported.py</filename>
-                </note>
-            </para>
-
-            <para>
-                The exported data (i.e. <filename>testdata.json</filename>)
-                contains paths to the Build Directory.
-                Thus, the contents of the directory can be moved
-                to another machine as long as you update some paths in the
-                JSON.
-                Usually, you only care about the
-                <filename>${DEPLOY_DIR}/rpm</filename> directory
-                (assuming the RPM and Smart tests are enabled).
-                Consequently, running the tests on other machine
-                means that you have to move the contents and call
-                <filename>runexported.py</filename> with
-                "--deploy-dir <replaceable>path</replaceable>" as
-                follows:
-                <literallayout class='monospaced'>
-     ./runexported.py --deploy-dir /new/path/on/this/machine testdata.json
-                </literallayout>
-                <filename>runexported.py</filename> accepts other arguments
-                as well as described using <filename>--help</filename>.
             </para>
         </section>
 
@@ -9198,6 +9383,78 @@
                 </para>
             </section>
         </section>
+
+        <section id='installing-packages-in-the-dut-without-the-package-manager'>
+            <title>Installing Packages in the DUT Without the Package Manager</title>
+
+            <para>
+                When a test requires a package built by BitBake, it is possible
+                to install that package.
+                Installing the package does not require a package manager be
+                installed in the device under test (DUT).
+                It does, however, require an SSH connection and the target must
+                be using the <filename>sshcontrol</filename> class.
+                <note>
+                    This method uses <filename>scp</filename> to copy files
+                    from the host to the target, which causes permissions and
+                    special attributes to be lost.
+                </note>
+            </para>
+
+            <para>
+                A JSON file is used to define the packages needed by a test.
+                This file must be in the same path as the file used to define
+                the tests.
+                Furthermore, the filename must map directly to the test
+                module name with a <filename>.json</filename> extension.
+            </para>
+
+            <para>
+                The JSON file must include an object with the test name as
+                keys of an object or an array.
+                This object (or array of objects) uses the following data:
+                <itemizedlist>
+                    <listitem><para>"pkg" - A mandatory string that is the
+                        name of the package to be installed.
+                        </para></listitem>
+                    <listitem><para>"rm" - An optional boolean, which defaults
+                        to "false", that specifies to remove the package after
+                        the test.
+                        </para></listitem>
+                    <listitem><para>"extract" - An optional boolean, which
+                        defaults to "false", that specifies if the package must
+                        be extracted from the package format.
+                        When set to "true", the package is not automatically
+                        installed into the DUT.
+                        </para></listitem>
+                </itemizedlist>
+            </para>
+
+            <para>
+                Following is an example JSON file that handles test "foo"
+                installing package "bar" and test "foobar" installing
+                packages "foo" and "bar".
+                Once the test is complete, the packages are removed from the
+                DUT.
+                <literallayout class='monospaced'>
+     {
+         "foo": {
+             "pkg": "bar"
+         },
+         "foobar": [
+             {
+                 "pkg": "foo",
+                 "rm": true
+             },
+             {
+                 "pkg": "bar",
+                 "rm": true
+             }
+         ]
+     }
+                </literallayout>
+            </para>
+        </section>
     </section>
 
     <section id="platdev-gdb-remotedebug">

documentation/dev-manual/dev-manual.xml

@@ -86,6 +86,21 @@
                 <date>April 2016</date>
                 <revremark>Released with the Yocto Project 2.1 Release.</revremark>
             </revision>
+            <revision>
+                <revnumber>2.1.1</revnumber>
+                <date>August 2016</date>
+                <revremark>Released with the Yocto Project 2.1.1 Release.</revremark>
+            </revision>
+            <revision>
+                <revnumber>2.1.2</revnumber>
+                <date>December 2016</date>
+                <revremark>Released with the Yocto Project 2.1.2 Release.</revremark>
+            </revision>
+            <revision>
+                <revnumber>2.1.3</revnumber>
+                <date>June 2017</date>
+                <revremark>Released with the Yocto Project 2.1.3 Release.</revremark>
+            </revision>
         </revhistory>
 
     <copyright>
@@ -101,12 +116,46 @@
           Creative Commons.
       </para>
 
-      <note>
-          For the latest version of this manual associated with this
-          Yocto Project release, see the
-          <ulink url='&YOCTO_DOCS_DEV_URL;'>Yocto Project Development Manual</ulink>
-          from the Yocto Project website.
-      </note>
+           <note><title>Manual Notes</title>
+               <itemizedlist>
+                   <listitem><para>
+                       This version of the
+                       <emphasis>Yocto Project Development Manual</emphasis>
+                       is for the &YOCTO_DOC_VERSION; release of the
+                       Yocto Project.
+                       To be sure you have the latest version of the manual
+                       for this release, go to the
+                       <ulink url='&YOCTO_HOME_URL;/documentation'>Yocto Project documentation page</ulink>
+                       and select the manual from that site.
+                       Manuals from the site are more up-to-date than manuals
+                       derived from the Yocto Project released TAR files.
+                       </para></listitem>
+                   <listitem><para>
+                       If you located this manual through a web search, the
+                       version of the manual might not be the one you want
+                       (e.g. the search might have returned a manual much
+                       older than the Yocto Project version with which you
+                       are working).
+                       You can see all Yocto Project major releases by
+                       visiting the
+                       <ulink url='&YOCTO_WIKI_URL;/wiki/Releases'>Releases</ulink>
+                       page.
+                       If you need a version of this manual for a different
+                       Yocto Project release, visit the
+                       <ulink url='&YOCTO_HOME_URL;/documentation'>Yocto Project documentation page</ulink>
+                       and select the manual set by using the
+                       "ACTIVE RELEASES DOCUMENTATION" or "DOCUMENTS ARCHIVE"
+                       pull-down menus.
+                       </para></listitem>
+                   <listitem><para>
+                       To report any inaccuracies or problems with this
+                       manual, send an email to the Yocto Project
+                       discussion group at
+                       <filename>yocto@yoctoproject.com</filename> or log into
+                       the freenode <filename>#yocto</filename> channel.
+                       </para></listitem>
+               </itemizedlist>
+           </note>
     </legalnotice>
 
     </bookinfo>

documentation/kernel-dev/kernel-dev-common.xml

@@ -384,9 +384,10 @@
 
             <para>
                 The resulting <filename>.config</filename> file is
-                located in
-                <filename>${</filename><ulink url='&YOCTO_DOCS_REF_URL;#var-WORKDIR'><filename>WORKDIR</filename></ulink><filename>}</filename> under the
-                <filename>linux-${</filename><ulink url='&YOCTO_DOCS_REF_URL;#var-PACKAGE_ARCH'><filename>PACKAGE_ARCH</filename></ulink><filename>}-${<ulink url='&YOCTO_DOCS_REF_URL;#var-LINUX_KERNEL_TYPE'><filename>LINUX_KERNEL_TYPE</filename></ulink>}-build</filename> directory.
+                located in the build directory,
+                <filename>${</filename><ulink url='&YOCTO_DOCS_REF_URL;#var-B'><filename>B</filename></ulink><filename>}</filename>,
+                which expands to
+                <filename>${</filename><ulink url='&YOCTO_DOCS_REF_URL;#var-WORKDIR'><filename>WORKDIR</filename></ulink><filename>}</filename><filename>/linux-</filename><filename>${</filename><ulink url='&YOCTO_DOCS_REF_URL;#var-PACKAGE_ARCH'><filename>PACKAGE_ARCH</filename></ulink><filename>}-${</filename><ulink url='&YOCTO_DOCS_REF_URL;#var-LINUX_KERNEL_TYPE'><filename>LINUX_KERNEL_TYPE</filename></ulink><filename>}-build</filename>.
                 You can use the entire <filename>.config</filename> file as the
                 <filename>defconfig</filename> file as described in the
                 "<link linkend='changing-the-configuration'>Changing the Configuration</link>" section.
@@ -394,6 +395,16 @@
                 see the
                 "<ulink url='&YOCTO_DOCS_DEV_URL;#using-menuconfig'>Using <filename>menuconfig</filename></ulink>"
                 section in the Yocto Project Development Manual.
+                <note>
+                    You can determine what a variable expands to by looking
+                    at the output of the <filename>bitbake -e</filename>
+                    command:
+                    <literallayout class='monospaced'>
+     $ bitbake -e virtual/kernel
+                    </literallayout>
+                    Search the output for the variable in which you are
+                    interested to see exactly how it is expanded and used.
+                </note>
             </para>
 
             <para>
@@ -512,8 +523,14 @@
                 </literallayout>
                 Taking this step ensures you have the sources prepared
                 and the configuration completed.
-                You can find the sources in the
-                <filename>${</filename><ulink url='&YOCTO_DOCS_REF_URL;#var-WORKDIR'><filename>WORKDIR</filename></ulink><filename>}/linux</filename> directory.
+                You can find the sources in the build directory within the
+                <filename>source/</filename> directory, which is a symlink
+                (i.e. <filename>${</filename><ulink url='&YOCTO_DOCS_REF_URL;#var-B'><filename>B</filename></ulink><filename>}/source</filename>).
+                The <filename>source/</filename> directory expands to
+                <filename>${</filename><ulink url='&YOCTO_DOCS_REF_URL;#var-WORKDIR'><filename>WORKDIR</filename></ulink><filename>}</filename><filename>/linux-</filename><filename>${</filename><ulink url='&YOCTO_DOCS_REF_URL;#var-PACKAGE_ARCH'><filename>PACKAGE_ARCH</filename></ulink><filename>}-${</filename><ulink url='&YOCTO_DOCS_REF_URL;#var-LINUX_KERNEL_TYPE'><filename>LINUX_KERNEL_TYPE</filename></ulink><filename>}-build/source</filename>.
+                The directory pointed to by the
+                <filename>source/</filename> symlink is also known as
+                <filename>${</filename><ulink url='&YOCTO_DOCS_REF_URL;#var-STAGING_KERNEL_DIR'><filename>STAGING_KERNEL_DIR</filename></ulink><filename>}</filename>.
             </para>
 
             <para>

documentation/kernel-dev/kernel-dev.xml

@@ -71,6 +71,21 @@
                 <date>April 2016</date>
                 <revremark>Released with the Yocto Project 2.1 Release.</revremark>
             </revision>
+            <revision>
+                <revnumber>2.1.1</revnumber>
+                <date>August 2016</date>
+                <revremark>Released with the Yocto Project 2.1.1 Release.</revremark>
+            </revision>
+            <revision>
+                <revnumber>2.1.2</revnumber>
+                <date>December 2016</date>
+                <revremark>Released with the Yocto Project 2.1.2 Release.</revremark>
+            </revision>
+            <revision>
+                <revnumber>2.1.3</revnumber>
+                <date>June 2017</date>
+                <revremark>Released with the Yocto Project 2.1.3 Release.</revremark>
+            </revision>
         </revhistory>
 
     <copyright>
@@ -83,12 +98,46 @@
         Permission is granted to copy, distribute and/or modify this document under
         the terms of the <ulink type="http" url="http://creativecommons.org/licenses/by-sa/2.0/uk/">Creative Commons Attribution-Share Alike 2.0 UK: England &amp; Wales</ulink> as published by Creative Commons.
       </para>
-      <note>
-          For the latest version of this manual associated with this
-          Yocto Project release, see the
-          <ulink url='&YOCTO_DOCS_KERNEL_DEV_URL;'>Yocto Project Linux Kernel Development Manual</ulink>
-          from the Yocto Project website.
-      </note>
+           <note><title>Manual Notes</title>
+               <itemizedlist>
+                   <listitem><para>
+                       This version of the
+                       <emphasis>Yocto Project Linux Kernel Development Manual</emphasis>
+                       is for the &YOCTO_DOC_VERSION; release of the
+                       Yocto Project.
+                       To be sure you have the latest version of the manual
+                       for this release, go to the
+                       <ulink url='&YOCTO_HOME_URL;/documentation'>Yocto Project documentation page</ulink>
+                       and select the manual from that site.
+                       Manuals from the site are more up-to-date than manuals
+                       derived from the Yocto Project released TAR files.
+                       </para></listitem>
+                   <listitem><para>
+                       If you located this manual through a web search, the
+                       version of the manual might not be the one you want
+                       (e.g. the search might have returned a manual much
+                       older than the Yocto Project version with which you
+                       are working).
+                       You can see all Yocto Project major releases by
+                       visiting the
+                       <ulink url='&YOCTO_WIKI_URL;/wiki/Releases'>Releases</ulink>
+                       page.
+                       If you need a version of this manual for a different
+                       Yocto Project release, visit the
+                       <ulink url='&YOCTO_HOME_URL;/documentation'>Yocto Project documentation page</ulink>
+                       and select the manual set by using the
+                       "ACTIVE RELEASES DOCUMENTATION" or "DOCUMENTS ARCHIVE"
+                       pull-down menus.
+                       </para></listitem>
+                   <listitem><para>
+                       To report any inaccuracies or problems with this
+                       manual, send an email to the Yocto Project
+                       discussion group at
+                       <filename>yocto@yoctoproject.com</filename> or log into
+                       the freenode <filename>#yocto</filename> channel.
+                       </para></listitem>
+               </itemizedlist>
+           </note>
     </legalnotice>
 
     </bookinfo>

documentation/mega-manual/mega-manual.xml

@@ -55,6 +55,21 @@
                 <date>April 2016</date>
                 <revremark>Released with the Yocto Project 2.1 Release.</revremark>
             </revision>
+            <revision>
+                <revnumber>2.1.1</revnumber>
+                <date>August 2016</date>
+                <revremark>Released with the Yocto Project 2.1.1 Release.</revremark>
+            </revision>
+            <revision>
+                <revnumber>2.1.2</revnumber>
+                <date>December 2016</date>
+                <revremark>Released with the Yocto Project 2.1.2 Release.</revremark>
+            </revision>
+            <revision>
+                <revnumber>2.1.3</revnumber>
+                <date>June 2017</date>
+                <revremark>Released with the Yocto Project 2.1.3 Release.</revremark>
+            </revision>
        </revhistory>
 
     <copyright>
@@ -67,12 +82,46 @@
         Permission is granted to copy, distribute and/or modify this document under
         the terms of the <ulink type="http" url="http://creativecommons.org/licenses/by-sa/2.0/uk/">Creative Commons Attribution-Share Alike 2.0 UK: England &amp; Wales</ulink> as published by Creative Commons.
       </para>
-      <note>
-          For the latest version of this manual associated with this
-          Yocto Project release, see the
-          <ulink url='&YOCTO_DOCS_MM_URL;'>Yocto Project Mega-Manual</ulink>
-          from the Yocto Project website.
-      </note>
+           <note><title>Manual Notes</title>
+               <itemizedlist>
+                   <listitem><para>
+                       This version of the
+                       <emphasis>Yocto Project Mega-Manual</emphasis>
+                       is for the &YOCTO_DOC_VERSION; release of the
+                       Yocto Project.
+                       To be sure you have the latest version of the manual
+                       for this release, go to the
+                       <ulink url='&YOCTO_HOME_URL;/documentation'>Yocto Project documentation page</ulink>
+                       and select the manual from that site.
+                       Manuals from the site are more up-to-date than manuals
+                       derived from the Yocto Project released TAR files.
+                       </para></listitem>
+                   <listitem><para>
+                       If you located this manual through a web search, the
+                       version of the manual might not be the one you want
+                       (e.g. the search might have returned a manual much
+                       older than the Yocto Project version with which you
+                       are working).
+                       You can see all Yocto Project major releases by
+                       visiting the
+                       <ulink url='&YOCTO_WIKI_URL;/wiki/Releases'>Releases</ulink>
+                       page.
+                       If you need a version of this manual for a different
+                       Yocto Project release, visit the
+                       <ulink url='&YOCTO_HOME_URL;/documentation'>Yocto Project documentation page</ulink>
+                       and select the manual set by using the
+                       "ACTIVE RELEASES DOCUMENTATION" or "DOCUMENTS ARCHIVE"
+                       pull-down menus.
+                       </para></listitem>
+                   <listitem><para>
+                       To report any inaccuracies or problems with this
+                       manual, send an email to the Yocto Project
+                       discussion group at
+                       <filename>yocto@yoctoproject.com</filename> or log into
+                       the freenode <filename>#yocto</filename> channel.
+                       </para></listitem>
+               </itemizedlist>
+           </note>
 
     </legalnotice>
 

documentation/poky.ent

@@ -1,12 +1,12 @@
-<!ENTITY DISTRO "2.1">
-<!ENTITY DISTRO_COMPRESSED "21">
+<!ENTITY DISTRO "2.1.3">
+<!ENTITY DISTRO_COMPRESSED "213">
 <!ENTITY DISTRO_NAME_NO_CAP "krogoth">
 <!ENTITY DISTRO_NAME "Krogoth">
-<!ENTITY YOCTO_DOC_VERSION "2.1">
-<!ENTITY POKYVERSION "15.0.0">
-<!ENTITY POKYVERSION_COMPRESSED "1500">
+<!ENTITY YOCTO_DOC_VERSION "2.1.3">
+<!ENTITY POKYVERSION "15.0.3">
+<!ENTITY POKYVERSION_COMPRESSED "1503">
 <!ENTITY YOCTO_POKY "poky-&DISTRO_NAME_NO_CAP;-&POKYVERSION;">
-<!ENTITY COPYRIGHT_YEAR "2010-2016">
+<!ENTITY COPYRIGHT_YEAR "2010-2017">
 <!ENTITY YOCTO_DL_URL "http://downloads.yoctoproject.org">
 <!ENTITY YOCTO_HOME_URL "http://www.yoctoproject.org">
 <!ENTITY YOCTO_LISTS_URL "http://lists.yoctoproject.org">

documentation/profile-manual/profile-manual-intro.xml

@@ -67,8 +67,10 @@
                 By default, the Yocto build system strips symbols from the
                 binaries it packages, which makes it difficult to use some
                 of the tools.
-                </para><para>You can prevent that by putting the following
-                in your local.conf when you build the image:
+                </para><para>You can prevent that by setting the
+                <ulink url='&YOCTO_DOCS_REF_URL;#var-INHIBIT_PACKAGE_STRIP'><filename>INHIBIT_PACKAGE_STRIP</filename></ulink>
+                variable to "1" in your
+                <filename>local.conf</filename> when you build the image:
                 </para>
             </note>
             <literallayout class='monospaced'>

documentation/profile-manual/profile-manual-usage.xml

@@ -60,8 +60,11 @@
 
         <para>
             In particular, you'll get the most mileage out of perf if you
-            profile an image built with INHIBIT_PACKAGE_STRIP = "1" in your
-            local.conf.
+            profile an image built with the following in your
+            <filename>local.conf</filename> file:
+            <literallayout class='monospaced'>
+     <ulink url='&YOCTO_DOCS_REF_URL;#var-INHIBIT_PACKAGE_STRIP'>INHIBIT_PACKAGE_STRIP</ulink> = "1"
+            </literallayout>
         </para>
 
         <para>
@@ -355,10 +358,10 @@
             </para>
 
             <para>
-                One way around that is to put the following in your local.conf
-                when you build the image:
+                One way around that is to put the following in your
+                <filename>local.conf</filename> file when you build the image:
                 <literallayout class='monospaced'>
-     INHIBIT_PACKAGE_STRIP = "1"
+     <ulink url='&YOCTO_DOCS_REF_URL;#var-INHIBIT_PACKAGE_STRIP'>INHIBIT_PACKAGE_STRIP</ulink> = "1"
                 </literallayout>
                 However, we already have an image with the binaries stripped,
                 so what can we do to get perf to resolve the symbols? Basically

documentation/profile-manual/profile-manual.xml

@@ -71,6 +71,21 @@
                 <date>April 2016</date>
                 <revremark>Released with the Yocto Project 2.1 Release.</revremark>
             </revision>
+            <revision>
+                <revnumber>2.1.1</revnumber>
+                <date>August 2016</date>
+                <revremark>Released with the Yocto Project 2.1.1 Release.</revremark>
+            </revision>
+            <revision>
+                <revnumber>2.1.2</revnumber>
+                <date>December 2016</date>
+                <revremark>Released with the Yocto Project 2.1.2 Release.</revremark>
+            </revision>
+            <revision>
+                <revnumber>2.1.3</revnumber>
+                <date>June 2017</date>
+                <revremark>Released with the Yocto Project 2.1.3 Release.</revremark>
+            </revision>
         </revhistory>
 
     <copyright>
@@ -86,12 +101,46 @@
           Creative Commons.
       </para>
 
-      <note>
-          For the latest version of this manual associated with this
-          Yocto Project release, see the
-          <ulink url='&YOCTO_DOCS_PROF_URL;'>Yocto Project Profiling and Tracing Manual</ulink>
-          from the Yocto Project website.
-      </note>
+           <note><title>Manual Notes</title>
+               <itemizedlist>
+                   <listitem><para>
+                       This version of the
+                       <emphasis>Yocto Project Profiling and Tracing Manual</emphasis>
+                       is for the &YOCTO_DOC_VERSION; release of the
+                       Yocto Project.
+                       To be sure you have the latest version of the manual
+                       for this release, go to the
+                       <ulink url='&YOCTO_HOME_URL;/documentation'>Yocto Project documentation page</ulink>
+                       and select the manual from that site.
+                       Manuals from the site are more up-to-date than manuals
+                       derived from the Yocto Project released TAR files.
+                       </para></listitem>
+                   <listitem><para>
+                       If you located this manual through a web search, the
+                       version of the manual might not be the one you want
+                       (e.g. the search might have returned a manual much
+                       older than the Yocto Project version with which you
+                       are working).
+                       You can see all Yocto Project major releases by
+                       visiting the
+                       <ulink url='&YOCTO_WIKI_URL;/wiki/Releases'>Releases</ulink>
+                       page.
+                       If you need a version of this manual for a different
+                       Yocto Project release, visit the
+                       <ulink url='&YOCTO_HOME_URL;/documentation'>Yocto Project documentation page</ulink>
+                       and select the manual set by using the
+                       "ACTIVE RELEASES DOCUMENTATION" or "DOCUMENTS ARCHIVE"
+                       pull-down menus.
+                       </para></listitem>
+                   <listitem><para>
+                       To report any inaccuracies or problems with this
+                       manual, send an email to the Yocto Project
+                       discussion group at
+                       <filename>yocto@yoctoproject.com</filename> or log into
+                       the freenode <filename>#yocto</filename> channel.
+                       </para></listitem>
+               </itemizedlist>
+           </note>
     </legalnotice>
 
     </bookinfo>

documentation/ref-manual/migration.xml

@@ -2447,8 +2447,8 @@
                     </literallayout>
                     </para></listitem>
                 <listitem><para>
-                    <filename>d.delVar('</filename><replaceable>varname</replaceable><filename>')</filename> and
-                    <filename>d.setVar('</filename><replaceable>varname</replaceable><filename>', None)</filename>
+                    <filename>d.delVar('</filename><replaceable>VARNAME</replaceable><filename>')</filename> and
+                    <filename>d.setVar('</filename><replaceable>VARNAME</replaceable><filename>', None)</filename>
                     result in the variable and all of its overrides being
                     cleared out.
                     Before the change, only the non-overridden values
@@ -2740,13 +2740,13 @@
 
         <para>
             Variable expressions, such as
-            <filename>${</filename><replaceable>varname</replaceable><filename>}</filename>
+            <filename>${</filename><replaceable>VARNAME</replaceable><filename>}</filename>
             no longer expand automatically within Python functions.
             Suppressing expansion was done to allow Python functions to
             construct shell scripts or other code for situations in which you
             do not want such expressions expanded.
             For any existing code that relies on these expansions, you need to
-            change the expansions to either expand the value of individual
+            change the expansions to expand the value of individual
             variables through <filename>d.getVar()</filename>.
             To alternatively expand more complex expressions,
             use <filename>d.expand()</filename>.
@@ -2880,7 +2880,7 @@
             to allow the default implementation from the
             <filename>autotools</filename> class to work such that
             <filename>autoreconf</filename> succeeds and produces a working
-            configure script), and to remove the
+            configure script, and to remove the
             overridden <filename>do_configure</filename> task such that the
             default implementation does get used.
         </para>
@@ -2910,7 +2910,8 @@
             <filename>do_rootfs</filename>, you should make edits so that
             those tasks are after the
             <link linkend='ref-tasks-image-complete'><filename>do_image_complete</filename></link>
-            task rather than before the task so that the your added tasks
+            task rather than after <filename>do_rootfs</filename>
+            so that the your added tasks
             run at the correct time.
         </para>
 
@@ -3057,6 +3058,10 @@
             <ulink url='&YOCTO_DOCS_SDK_URL;#sdk-extensible'>extensible SDK</ulink>.
             For information on these SDKs and how to build and use them, see the
             <ulink url='&YOCTO_DOCS_SDK_URL;#sdk-intro'>Yocto Project Software Development Kit (SDK) Developer's Guide</ulink>.
+            <note>
+                The Yocto Project Eclipse IDE Plug-in is still supported and
+                is not affected by this change.
+            </note>
         </para>
     </section>
 
@@ -3128,7 +3133,7 @@
                     The separate <filename>poky-tiny</filename> distribution
                     now uses the musl C library instead of a heavily pared
                     down <filename>glibc</filename>.
-                    Using <filename>glibc</filename> results in a smaller
+                    Using musl results in a smaller
                     distribution and facilitates much greater maintainability
                     because musl is designed to have a small footprint.</para>
 
@@ -3194,6 +3199,21 @@
         </para>
     </section>
 
+    <section id='migration-2.1-supporting-gobject-introspection'>
+        <title>Supporting GObject Introspection</title>
+
+        <para>
+            This release supports generation of GLib Introspective
+            Repository (GIR) files through GObject introspection, which is
+            the standard mechanism for accessing GObject-based software from
+            runtime environments.
+            You can enable, disable, and test the generation of this data.
+            See the
+            "<ulink url='&YOCTO_DOCS_DEV_URL;#enabling-gobject-introspection-support'>Enabling GObject Introspection Support</ulink>"
+            section for more information.
+        </para>
+    </section>
+
     <section id='migration-2.1-miscellaneous-changes'>
         <title>Miscellaneous Changes</title>
 
@@ -3205,6 +3225,9 @@
                     If your host distribution does not provide a sufficiently
                     recent version, you can install the buildtools, which
                     will provide it.
+                    See the
+                    "<link linkend='required-git-tar-and-python-versions'>Required Git, tar, and Python Versions</link>"
+                    section for more information on the buildtools tarball.
                     </para></listitem>
                 <listitem><para>
                     The buggy and incomplete support for the RPM version 4
@@ -3212,6 +3235,25 @@
                     The well-tested and maintained support for RPM version 5
                     remains.
                     </para></listitem>
+                <listitem><para>
+                    Previously, the following list of packages were removed
+                    if package-management was not in
+                    <link linkend='var-IMAGE_FEATURES'><filename>IMAGE_FEATURES</filename></link>,
+                    regardless of any dependencies:
+                    <literallayout class='monospaced'>
+     update-rc.d
+     base-passwd
+     shadow
+     update-alternatives
+     run-postinsts
+                    </literallayout>
+                    With the Yocto Project 2.1 release, these packages are only
+                    removed if "read-only-rootfs" is in
+                    <filename>IMAGE_FEATURES</filename>, since they might
+                    still be needed for a read-write image even in the absence
+                    of a package manager (e.g. if users need to be added,
+                    modified, or removed at runtime).
+                    </para></listitem>
                 <listitem><para>
                     The
                     <ulink url='&YOCTO_DOCS_SDK_URL;#sdk-devtool-use-devtool-modify-to-modify-the-source-of-an-existing-component'><filename>devtool modify</filename></ulink>
@@ -3220,7 +3262,7 @@
                     The "-x" or "--extract" options are now no-ops.
                     If you wish to provide your own existing source tree, you
                     will now need to specify either the "-n" or
-                    "--no-extract" option when running
+                    "--no-extract" options when running
                     <filename>devtool modify</filename>.
                     </para></listitem>
                 <listitem><para>
@@ -3228,10 +3270,8 @@
                     or does not specify whether a keyboard is attached, then
                     the default is to assume a keyboard is attached rather
                     than assume no keyboard.
-                    <note>
-                        This change primarily affects the Sato UI.
-                    </note>
-                    </para></listitem>
+                    This change primarily affects the Sato UI.
+                   </para></listitem>
                 <listitem><para>
                     The <filename>.debug</filename> directory packaging is
                     now automatic.
@@ -3248,8 +3288,8 @@
                     This data has been replaced with
                     <filename>getrusage()</filename> data and corrected IO
                     statistics.
-                    You will probably need to update code that reads the
-                    <filename>buildstats</filename> data.
+                    You will probably need to update any custom code that reads
+                    the <filename>buildstats</filename> data.
                     </para></listitem>
                 <listitem><para>
                     The
@@ -3272,9 +3312,22 @@
                     <filename>meta-yocto-bsp</filename> layer.
                     Most modern x86 boards do not rely on this file and it only
                     adds kernel error messages during startup.
-                    If you do still need the file, you can simply add
-                    <filename>v86d</filename> to your image.
+                    If you do still need to support
+                    <filename>uvesafb</filename>, you can
+                    simply add <filename>v86d</filename> to your image.
                     </para></listitem>
+                <listitem><para>
+                     Build sysroot paths are now removed from debug symbol
+                     files.
+                     Removing these paths means that remote GDB using an
+                     unstripped build system sysroot will no longer work
+                     (although this was never documented to work).
+                     The supported method to accomplish something similar is
+                     to set <filename>IMAGE_GEN_DEBUGFS</filename> to "1",
+                     which will generate a companion debug image
+                     containing unstripped binaries and associated debug
+                     sources alongside the image.
+                     </para></listitem>
             </itemizedlist>
         </para>
     </section>

documentation/ref-manual/ref-features.xml

@@ -144,6 +144,27 @@
                     </para></listitem>
                 <listitem><para><emphasis>bluetooth:</emphasis> Include
                     bluetooth support (integrated BT only).</para></listitem>
+                <listitem><para><emphasis>bluez5:</emphasis> Include
+                    BlueZ Version 5, which provides core Bluetooth layers and
+                    protocols support.
+                    <note>
+                        The default value for the
+                        <link linkend='var-DISTRO_FEATURES'><filename>DISTRO FEATURES</filename></link>
+                        variable includes "bluetooth", which causes bluez5
+                        to be backfilled in for bluetooth support.
+                        If you do not want bluez5 backfilled and would rather
+                        use bluez4, you need to use the
+                        <link linkend='var-DISTRO_FEATURES_BACKFILL_CONSIDERED'><filename>DISTRO_FEATURES_BACKFILL_CONSIDERED</filename></link>
+                        variable as follows:
+                        <literallayout class='monospaced'>
+     DISTRO_FEATURES_BACKFILL_CONSIDERED = "bluez5"
+                        </literallayout>
+                        Setting this variable tells the OpenEmbedded build
+                        system that you have considered but ruled
+                        out using the bluez5 feature and that bluez4 will be
+                        used.
+                    </note>
+                    </para></listitem>
                 <listitem><para><emphasis>cramfs:</emphasis> Include CramFS
                     support.</para></listitem>
                 <listitem><para><emphasis>directfb:</emphasis>

documentation/ref-manual/ref-manual.xml

@@ -102,6 +102,21 @@
                 <date>April 2016</date>
                 <revremark>Released with the Yocto Project 2.1 Release.</revremark>
             </revision>
+            <revision>
+                <revnumber>2.1.1</revnumber>
+                <date>August 2016</date>
+                <revremark>Released with the Yocto Project 2.1.1 Release.</revremark>
+            </revision>
+            <revision>
+                <revnumber>2.1.2</revnumber>
+                <date>December 2016</date>
+                <revremark>Released with the Yocto Project 2.1.2 Release.</revremark>
+            </revision>
+            <revision>
+                <revnumber>2.1.3</revnumber>
+                <date>June 2017</date>
+                <revremark>Released with the Yocto Project 2.1.3 Release.</revremark>
+            </revision>
         </revhistory>
 
     <copyright>
@@ -114,12 +129,46 @@
         Permission is granted to copy, distribute and/or modify this document under
         the terms of the <ulink type="http" url="http://creativecommons.org/licenses/by-sa/2.0/uk/">Creative Commons Attribution-Share Alike 2.0 UK: England &amp; Wales</ulink> as published by Creative Commons.
       </para>
-      <note>
-          For the latest version of this manual associated with this
-          Yocto Project release, see the
-          <ulink url='&YOCTO_DOCS_REF_URL;'>Yocto Project Reference Manual</ulink>
-          from the Yocto Project website.
-      </note>
+           <note><title>Manual Notes</title>
+               <itemizedlist>
+                   <listitem><para>
+                       This version of the
+                       <emphasis>Yocto Project Reference Manual</emphasis>
+                       is for the &YOCTO_DOC_VERSION; release of the
+                       Yocto Project.
+                       To be sure you have the latest version of the manual
+                       for this release, go to the
+                       <ulink url='&YOCTO_HOME_URL;/documentation'>Yocto Project documentation page</ulink>
+                       and select the manual from that site.
+                       Manuals from the site are more up-to-date than manuals
+                       derived from the Yocto Project released TAR files.
+                       </para></listitem>
+                   <listitem><para>
+                       If you located this manual through a web search, the
+                       version of the manual might not be the one you want
+                       (e.g. the search might have returned a manual much
+                       older than the Yocto Project version with which you
+                       are working).
+                       You can see all Yocto Project major releases by
+                       visiting the
+                       <ulink url='&YOCTO_WIKI_URL;/wiki/Releases'>Releases</ulink>
+                       page.
+                       If you need a version of this manual for a different
+                       Yocto Project release, visit the
+                       <ulink url='&YOCTO_HOME_URL;/documentation'>Yocto Project documentation page</ulink>
+                       and select the manual set by using the
+                       "ACTIVE RELEASES DOCUMENTATION" or "DOCUMENTS ARCHIVE"
+                       pull-down menus.
+                       </para></listitem>
+                   <listitem><para>
+                       To report any inaccuracies or problems with this
+                       manual, send an email to the Yocto Project
+                       discussion group at
+                       <filename>yocto@yoctoproject.com</filename> or log into
+                       the freenode <filename>#yocto</filename> channel.
+                       </para></listitem>
+               </itemizedlist>
+           </note>
     </legalnotice>
 
     </bookinfo>

documentation/ref-manual/ref-variables.xml

@@ -5940,7 +5940,7 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
 
         <glossentry id='var-INHIBIT_PACKAGE_DEBUG_SPLIT'><glossterm>INHIBIT_PACKAGE_DEBUG_SPLIT</glossterm>
             <info>
-                INHIBIT_PACKAGE_STRIP[doc] = "If set to "1", causes the build to not strip binaries in resulting packages."
+                INHIBIT_PACKAGE_DEBUG_SPLIT[doc] = "If set to "1", prevents the OpenEmbedded build system from splitting out debug information during packaging"
             </info>
             <glossdef>
                 <para role="glossdeffirst">
@@ -5976,7 +5976,19 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
             <glossdef>
                 <para role="glossdeffirst">
 <!--                <para role="glossdeffirst"><imagedata fileref="figures/define-generic.png" /> -->
-                    If set to "1", causes the build to not strip binaries in resulting packages.
+                    If set to "1", causes the build to not strip binaries in
+                    resulting packages and prevents the
+                    <filename>-dbg</filename> package from containing the
+                    source files.
+                </para>
+
+                <para>
+                     By default, the OpenEmbedded build system strips
+                     binaries and puts the debugging symbols into
+                     <filename>${</filename><link linkend='var-PN'><filename>PN</filename></link><filename>}-dbg</filename>.
+                     Consequently, you should not set
+                     <filename>INHIBIT_PACKAGE_STRIP</filename> when you plan
+                     to debug in general.
                 </para>
             </glossdef>
         </glossentry>
@@ -9559,8 +9571,48 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
             <glossdef>
                 <para role="glossdeffirst">
 <!--                <para role="glossdeffirst"><imagedata fileref="figures/define-generic.png" /> -->
-                    The revision of the recipe.
-                    The default value for this variable is "r0".
+                    The revision of the recipe. The default value for this
+                    variable is "r0".
+                    Subsequent revisions of the recipe conventionally have the
+                    values "r1", "r2", and so forth.
+                    When
+                    <link linkend='var-PV'><filename>PV</filename></link>
+                    increases, <filename>PR</filename> is conventionally reset
+                    to "r0".
+                    <note>
+                        The OpenEmbedded build system does not need the aid of
+                        <filename>PR</filename> to know when to rebuild a
+                        recipe.
+                        The build system uses
+                        <link linkend='var-STAMP'><filename>STAMP</filename></link>
+                        and the
+                        <link linkend='shared-state-cache'>shared state cache</link>
+                        mechanisms.
+                    </note>
+                    The <filename>PR</filename> variable primarily becomes
+                    significant when a package manager dynamically installs
+                    packages on an already built image.
+                    In this case, <filename>PR</filename>, which is the default
+                    value of
+                    <link linkend='var-PKGR'><filename>PKGR</filename></link>,
+                    helps the package manager distinguish which package is the
+                    most recent one in cases where many packages have the same
+                    <filename>PV</filename> (i.e. <filename>PKGV</filename>).
+                    A component having many packages with the same
+                    <filename>PV</filename> usually means that the packages all
+                    install the same upstream version, but with later
+                    (<filename>PR</filename>) version packages including
+                    packaging fixes.
+                    <note>
+                        <filename>PR</filename> does not need to be increased
+                        for changes that do not change the package contents or
+                        metadata.
+                    </note>
+                    Because manually managing <filename>PR</filename> can be
+                    cumbersome and error-prone, an automated solution exists.
+                    See the
+                    "<ulink url='&YOCTO_DOCS_DEV_URL;#working-with-a-pr-service'>Working With a PR Service</ulink>"
+                    section for more information.
                 </para>
             </glossdef>
         </glossentry>
@@ -10076,14 +10128,20 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
                     <filename>RDEPENDS</filename> since some automatic
                     handling occurs:
                     <itemizedlist>
-                        <listitem><para><emphasis><filename>shlibdeps</filename></emphasis>:  If
-                            a runtime package contains a shared library
-                            (<filename>.so</filename>), the build
-                            processes the library in order to determine other
-                            libraries to which it is dynamically linked.
-                            The build process adds these libraries to
-                            <filename>RDEPENDS</filename> when creating the runtime
-                            package.</para></listitem>
+                        <listitem><para><emphasis><filename>shlibdeps</filename></emphasis>:
+                            If a runtime package contains a compiled binary,
+                            the build processes the binary in order to
+                            determine any shared libraries
+                            (<filename>.so</filename> files) to which it is
+                            dynamically linked.
+                            The build process adds the packages containing
+                            these libraries to <filename>RDEPENDS</filename>
+                            when creating the runtime package.
+                            In addition, if the shared library is versioned,
+                            the dependency will have the version appended to it
+                            in order to force an upgrade to the appropriate
+                            version if needed.
+                            </para></listitem>
                         <listitem><para><emphasis><filename>pcdeps</filename></emphasis>:  If
                             the package ships a <filename>pkg-config</filename>
                             information file, the build process uses this file
@@ -11982,7 +12040,7 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
                     directory structure.
                     <literallayout class='monospaced'>
      SSTATE_MIRRORS ?= "\
-     file://.* http://<replaceable>someserver</replaceable>.tld/share/sstate/PATH \n \
+     file://.* http://<replaceable>someserver</replaceable>.tld/share/sstate/PATH;downloadfilename=PATH \n \
      file://.* file:///<replaceable>some-local-dir</replaceable>/sstate/PATH"
                     </literallayout>
                 </para>
@@ -14300,6 +14358,84 @@ recipes-graphics/xorg-font/font-alias_1.0.3.bb:PR = "${INC_PR}.3"
             </glossdef>
         </glossentry>
 
+        <glossentry id='var-UPSTREAM_CHECK_GITTAGREGEX'><glossterm>UPSTREAM_CHECK_GITTAGREGEX</glossterm>
+            <info>
+               UPSTREAM_CHECK_GITTAGREGEX[doc] = "Filters relevant Git tags when fetching source from an upstream Git repository."
+            </info>
+            <glossdef>
+                <para role="glossdeffirst">
+<!--                <para role="glossdeffirst"><imagedata fileref="figures/define-generic.png" /> -->
+                    When the
+                    <link linkend='ref-classes-distrodata'><filename>distrodata</filename></link>
+                    class is enabled globally, you can perform a per-recipe
+                    check for what the latest upstream source code version is
+                    by calling
+                    <filename>bitbake -c checkpkg</filename> <replaceable>recipe</replaceable>.
+                    If the recipe source code is provided from Git
+                    repositories, the OpenEmbedded build system determines the
+                    latest upstream version by picking the latest tag from the
+                    list of all repository tags.
+                    You can use the
+                    <filename>UPSTREAM_CHECK_GITTAGREGEX</filename>
+                    variable to provide a regular expression to filter only the
+                    relevant tags should the default filter not work
+                    correctly.
+                    <literallayout class='monospaced'>
+     UPSTREAM_CHECK_GITTAGREGEX = "git_tag_regex"
+                    </literallayout>
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-UPSTREAM_CHECK_REGEX'><glossterm>UPSTREAM_CHECK_REGEX</glossterm>
+            <info>
+               UPSTREAM_CHECK_REGEX[doc] = "The regular expression the package checking system uses to parse the page pointed to by UPSTREAM_CHECK_URI."
+            </info>
+            <glossdef>
+                <para role="glossdeffirst">
+<!--                <para role="glossdeffirst"><imagedata fileref="figures/define-generic.png" /> -->
+                    When the
+                    <link linkend='ref-classes-distrodata'><filename>distrodata</filename></link>
+                    class is enabled globally, use the
+                    <filename>UPSTREAM_CHECK_REGEX</filename> variable to
+                    specify a different regular expression instead of the
+                    default one when the package checking system is parsing
+                    the page found using
+                    <link linkend='var-UPSTREAM_CHECK_URI'><filename>UPSTREAM_CHECK_URI</filename></link>.
+                    <literallayout class='monospaced'>
+     UPSTREAM_CHECK_REGEX = "package_regex"
+                    </literallayout>
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-UPSTREAM_CHECK_URI'><glossterm>UPSTREAM_CHECK_URI</glossterm>
+            <info>
+               UPSTREAM_CHECK_URI[doc] = "The URL used by the package checking system to get the latest version of the package when source files are fetched from an upstream Git repository."
+            </info>
+            <glossdef>
+                <para role="glossdeffirst">
+<!--                <para role="glossdeffirst"><imagedata fileref="figures/define-generic.png" /> -->
+                    When the
+                    <link linkend='ref-classes-distrodata'><filename>distrodata</filename></link>
+                    class is enabled globally, you can perform a per-recipe
+                    check for what the latest upstream source code version is
+                    by calling <filename>bitbake -c checkpkg</filename>
+                    <replaceable>recipe</replaceable>.
+                    If the source code is provided from tarballs, the latest
+                    version is determined by fetching the directory listing
+                    where the tarball is and attempting to find a later tarball.
+                    When this approach does not work, you can use
+                    <filename>UPSTREAM_CHECK_URI</filename> to
+                    provide a different URI that contains the link to the
+                    latest tarball.
+                    <literallayout class='monospaced'>
+     UPSTREAM_CHECK_URI = "recipe_url"
+                    </literallayout>
+                </para>
+            </glossdef>
+        </glossentry>
+
         <glossentry id='var-USE_DEVFS'><glossterm>USE_DEVFS</glossterm>
             <info>
                USE_DEVFS[doc] = "Determines if devtmpfs is used for /dev population."

documentation/ref-manual/technical-details.xml

@@ -690,6 +690,123 @@
      addtask do_deploy_setscene
      do_deploy[dirs] = "${DEPLOYDIR} ${B}"
             </literallayout>
+            The following list explains the previous example:
+            <itemizedlist>
+                <listitem><para>
+                    Adding "do_deploy" to <filename>SSTATETASKS</filename>
+                    adds some required sstate-related processing, which is
+                    implemented in the
+                    <link linkend='ref-classes-sstate'><filename>sstate</filename></link>
+                    class, to before and after the
+                    <link linkend='ref-tasks-deploy'><filename>do_deploy</filename></link>
+                    task.
+                    </para></listitem>
+                <listitem><para>
+                    The
+                    <filename>do_deploy[sstate-inputdirs] = "${DEPLOYDIR}"</filename>
+                    declares that <filename>do_deploy</filename> places its
+                    output in <filename>${DEPLOYDIR}</filename> when run
+                    normally (i.e. when not using the sstate cache).
+                    This output becomes the input to the shared state cache.
+                    </para></listitem>
+                <listitem><para>
+                    The
+                    <filename>do_deploy[sstate-outputdirs] = "${DEPLOY_DIR_IMAGE}"</filename>
+                    line causes the contents of the shared state cache to be
+                    copied to <filename>${DEPLOY_DIR_IMAGE}</filename>.
+                    <note>
+                        If <filename>do_deploy</filename> is not already in
+                        the shared state cache or if its input checksum
+                        (signature) has changed from when the output was
+                        cached, the task will be run to populate the shared
+                        state cache, after which the contents of the shared
+                        state cache is copied to
+                        <filename>${DEPLOY_DIR_IMAGE}</filename>.
+                        If <filename>do_deploy</filename> is in the shared
+                        state cache and its signature indicates that the
+                        cached output is still valid (i.e. if no
+                        relevant task inputs have changed), then the contents
+                        of the shared state cache will be copied directly to
+                        <filename>${DEPLOY_DIR_IMAGE}</filename> by the
+                        <filename>do_deploy_setscene</filename> task instead,
+                        skipping the <filename>do_deploy</filename> task.
+                    </note>
+                    </para></listitem>
+                <listitem><para>
+                    The following task definition is glue logic needed to make
+                    the previous settings effective:
+                    <literallayout class='monospaced'>
+     python do_deploy_setscene () {
+         sstate_setscene(d)
+     }
+     addtask do_deploy_setscene
+                    </literallayout>
+                    <filename>sstate_setscene()</filename> takes the flags
+                    above as input and accelerates the
+                    <filename>do_deploy</filename> task through the
+                    shared state cache if possible.
+                    If the task was accelerated,
+                    <filename>sstate_setscene()</filename> returns True.
+                    Otherwise, it returns False, and the normal
+                    <filename>do_deploy</filename> task runs.
+                    For more information, see the
+                    "<ulink url='&YOCTO_DOCS_BB_URL;#setscene'>setscene</ulink>"
+                    section in the BitBake User Manual.
+                    </para></listitem>
+                <listitem><para>
+                    The
+                    <filename>do_deploy[dirs] = "${DEPLOYDIR} ${B}"</filename>
+                    line creates <filename>${DEPLOYDIR}</filename> and
+                    <filename>${B}</filename> before the
+                    <filename>do_deploy</filename> task runs.
+                    For more information, see the
+                    "<ulink url='&YOCTO_DOCS_BB_URL;#variable-flags'>Variable Flags</ulink>"
+                    section in the BitBake User Manual.
+                    <note>
+                        In cases where
+                        <filename>sstate-inputdirs</filename> and
+                        <filename>sstate-outputdirs</filename> would be the
+                        same, you can use
+                        <filename>sstate-plaindirs</filename>.
+                        For example, to preserve the
+                        <filename>${PKGD}</filename> and
+                        <filename>${PKGDEST}</filename> output from the
+                        <link linkend='ref-tasks-package'><filename>do_package</filename></link>
+                        task, use the following:
+                        <literallayout class='monospaced'>
+     do_package[sstate-plaindirs] = "${PKGD} ${PKGDEST}"
+                        </literallayout>
+                    </note>
+                    </para></listitem>
+                <listitem><para>
+                     <filename>sstate-inputdirs</filename> and
+                     <filename>sstate-outputdirs</filename> can also be used
+                     with multiple directories.
+                     For example, the following declares
+                     <filename>PKGDESTWORK</filename> and
+                     <filename>SHLIBWORK</filename> as shared state
+                     input directories, which populates the shared state
+                     cache, and <filename>PKGDATA_DIR</filename> and
+                     <filename>SHLIBSDIR</filename> as the corresponding
+                     shared state output directories:
+                     <literallayout class='monospaced'>
+     do_package[sstate-inputdirs] = "${PKGDESTWORK} ${SHLIBSWORKDIR}"
+     do_package[sstate-outputdirs] = "${PKGDATA_DIR} ${SHLIBSDIR}"
+                     </literallayout>
+                     </para></listitem>
+                 <listitem><para>
+                     These methods also include the ability to take a lockfile
+                     when manipulating shared state directory structures,
+                     for cases where file additions or removals are sensitive:
+                     <literallayout class='monospaced'>
+     do_package[sstate-lockfile] = "${PACKAGELOCK}"
+                     </literallayout>
+                     </para></listitem>
+            </itemizedlist>
+        </para>
+
+<!--
+        <para>
             In this example, we add some extra flags to the task, a name field ("deploy"), an
             input directory where the task sends data, and the output
             directory where the data from the task should eventually be copied.
@@ -713,6 +830,7 @@
             shared state directory structures since some cases are sensitive to file
             additions or removals.
         </para>
+-->
 
         <para>
             Behind the scenes, the shared state code works by looking in
@@ -722,7 +840,7 @@
             Here is an example:
             <literallayout class='monospaced'>
      SSTATE_MIRRORS ?= "\
-     file://.* http://someserver.tld/share/sstate/PATH \n \
+     file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
      file://.* file:///some/local/dir/sstate/PATH"
             </literallayout>
             <note>

documentation/ref-manual/usingpoky.xml

@@ -951,6 +951,19 @@
         * PR changed from "r0" to "r1"
         * PV changed from "0.1.10" to "0.1.12"
                 </literallayout>
+                <note>
+                    The <filename>buildhistory-diff</filename> tool requires
+                    the <filename>GitPython</filename> package.
+                    Be sure to install it using Pip3 as follows:
+                    <literallayout class='monospaced'>
+   $ pip3 install GitPython --user
+                    </literallayout>
+                    Alternatively, you can install
+                    <filename>python3-git</filename> using the appropriate
+                    distribution package manager (e.g.
+                    <filename>apt-get</filename>, <filename>dnf</filename>, or
+                    <filename>zipper</filename>).
+                </note>
             </para>
 
             <para>

documentation/sdk-manual/sdk-appendix-obtain.xml

@@ -168,7 +168,7 @@
 
     <para>
         The following figure shows the resulting directory structure after
-        you install the Standard SDK by running the <filename>.sh</filename>
+        you install the Standard SDK by running the <filename>*.sh</filename>
         SDK installation script:
     </para>
 
@@ -209,7 +209,7 @@
 
     <para>
         The following figure shows the resulting directory structure after
-        you install the Extensible SDK by running the <filename>.sh</filename>
+        you install the Extensible SDK by running the <filename>*.sh</filename>
         SDK installation script:
     </para>
 

documentation/sdk-manual/sdk-intro.xml

@@ -11,12 +11,12 @@
     <para>
         Welcome to the Yocto Project Software Development Kit (SDK)
         Developer's Guide.
-        This manual provides information that lets you use both the standard
-        Yocto Project SDK and an extensible SDK to develop applications and
-        images using the Yocto Project.
+        This manual provides information that explains how to use both the
+        standard Yocto Project SDK and an extensible SDK to develop
+        applications and images using the Yocto Project.
         Additionally, the manual also provides information on how to use
         the popular <trademark class='trade'>Eclipse</trademark> IDE as part
-        of your application development workflow.
+        of your application development workflow within the SDK environment.
     </para>
 
     <para>
@@ -30,11 +30,24 @@
     </para>
 
     <para>
-        A standard SDK consists of a cross-development toolchain that contains
-        a compiler, debugger, and various miscellaneous tools; libraries,
-        headers, and symbols to match an image; and environment setup script.
-        You can use this SDK to independently develop and test code that is
-        destined to run on some target machine.
+        A standard SDK consists of the following:
+        <itemizedlist>
+            <listitem><para><emphasis>Cross-Development Toolchain</emphasis>:
+                This toolchain contains a compiler, debugger, and various
+                miscellaneous tools.
+                </para></listitem>
+            <listitem><para><emphasis>Libraries, Headers, and Symbols</emphasis>:
+                The libraries, headers, and symbols are specific to the image
+                (i.e. they match the image).
+                </para></listitem>
+            <listitem><para><emphasis>Environment Setup Script</emphasis>:
+                This <filename>*.sh</filename> file, once run, sets up the
+                cross-development environment by defining variables and
+                preparing for SDK use.
+                </para></listitem>
+        </itemizedlist>
+        You can use the standard SDK to independently develop and test code
+        that is destined to run on some target machine.
     </para>
 
     <para>
@@ -59,7 +72,7 @@
     </para>
 
     <para>
-        Another feature for the SDKs is that only one set of cross-canadian
+        Another feature for the SDKs is that only one set of cross-compiler
         toolchain binaries are produced per architecture.
         This feature takes advantage of the fact that the target hardware can
         be passed to <filename>gcc</filename> as a set of compiler options.
@@ -74,12 +87,12 @@
     </para>
 
     <para>
-        Going beyond the actual SDK, the SDK development environment consists
-        of the following:
+        The SDK development environment consists of the following:
         <itemizedlist>
-            <listitem><para>An architecture-specific cross-toolchain and
+            <listitem><para>The self-contained SDK, which is an
+                architecture-specific cross-toolchain and
                 matching sysroots (target and native) all built by the
-                OpenEmbedded build system.
+                OpenEmbedded build system (e.g. the SDK).
                 The toolchain and sysroots are based on a
                 <ulink url='&YOCTO_DOCS_DEV_URL;#metadata'>Metadata</ulink>
                 configuration and extensions,
@@ -91,10 +104,10 @@
                 QEMU is not literally part of the SDK.
                 You must build and include this emulator separately.
                 However, QEMU plays an important role in the development
-                process that revolves around use of and SDK.
+                process that revolves around use of the SDK.
                 </para></listitem>
             <listitem><para>The Eclipse IDE Yocto Plug-in.
-                This plug-in is also available for you if you are an Eclipse
+                This plug-in is available for you if you are an Eclipse
                 user.
                 In the same manner as QEMU, the plug-in is not literally part
                 of the SDK but is rather available for use as part of the
@@ -192,7 +205,7 @@
             For information about the application development workflow that
             uses the Eclipse IDE and for a detailed example of how to install
             and configure the Eclipse Yocto Project Plug-in, see the
-            "<link link='sdk-developing-applications-using-eclipse'>Developing Applications Using <trademark class='trade'>Eclipse</trademark></link>"
+            "<link linkend='sdk-developing-applications-using-eclipse'>Developing Applications Using <trademark class='trade'>Eclipse</trademark></link>"
             section.
         </para>
     </section>
@@ -201,8 +214,8 @@
         <title>User-Space Tools</title>
 
         <para>
-            User-space tools are available as part of the SDK development
-            process and can be helpful.
+            User-space tools, which are available as part of the SDK
+            development environment, can be helpful.
             The tools include LatencyTOP, PowerTOP, Perf, SystemTap,
             and Lttng-ust.
             These tools are common development tools for the Linux platform.
@@ -264,7 +277,7 @@
         A developer can independently compile and test an object on their
         machine and then, when the object is ready for integration into an
         image, they can simply make it available to the machine that has the
-        the Yocto Project.
+        Yocto Project.
         Once the object is available, the image can be rebuilt using the
         Yocto Project to produce the modified image.
     </para>
@@ -274,7 +287,7 @@
         <orderedlist>
             <listitem><para><emphasis>Install the SDK for your target hardware:</emphasis>
                 For information on how to install the SDK, see the
-                "<link url='sdk-installing-the-sdk'>Installing the SDK</link>"
+                "<link linkend='sdk-installing-the-sdk'>Installing the SDK</link>"
                 section.</para></listitem>
             <listitem><para><emphasis>Download the Target Image:</emphasis>
                 The Yocto Project supports several target architectures
@@ -303,12 +316,15 @@
                 64-bit architecture).
                 Download kernel, root filesystem, and any other files you
                 need for your process.
-                <note>In order to use the root filesystem in QEMU, you
-                need to extract it.
-                See the
-                "<link url='sdk-extracting-the-root-filesystem'>Extracting the Root Filesystem</link>"
-                section for information on how to extract the root
-                filesystem.</note></para></listitem>
+                <note>
+                    To use the root filesystem in QEMU, you
+                    need to extract it.
+                    See the
+                    "<link linkend='sdk-extracting-the-root-filesystem'>Extracting the Root Filesystem</link>"
+                    section for information on how to extract the root
+                    filesystem.
+                </note>
+                </para></listitem>
             <listitem><para><emphasis>Develop and Test your
                 Application:</emphasis>  At this point, you have the tools
                 to develop your application.
@@ -316,7 +332,7 @@
                 emulator, you can go to
                 <ulink url='http://wiki.qemu.org/Main_Page'>QEMU Home Page</ulink>
                 to download and learn about the emulator.
-                You can see the
+                See the
                 "<ulink url='&YOCTO_DOCS_DEV_URL;#dev-manual-qemu'>Using the Quick EMUlator (QEMU)</ulink>"
                 chapter in the Yocto Project Development Manual
                 for information on using QEMU within the Yocto

documentation/sdk-manual/sdk-manual-customization.xsl

@@ -1,12 +1,11 @@
 <?xml version='1.0'?>
 <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns="http://www.w3.org/1999/xhtml" xmlns:fo="http://www.w3.org/1999/XSL/Format" version="1.0">
 
-<!--  <xsl:import href="http://downloads.yoctoproject.org/mirror/docbook-mirror/docbook-xsl-1.76.1/xhtml/docbook.xsl" />
--->
-
-  <xsl:import href="../template/1.76.1/docbook-xsl-1.76.1/xhtml/docbook.xsl" />
+  <xsl:import href="http://downloads.yoctoproject.org/mirror/docbook-mirror/docbook-xsl-1.76.1/xhtml/docbook.xsl" />
 
 <!--
+  <xsl:import href="../template/1.76.1/docbook-xsl-1.76.1/xhtml/docbook.xsl" />
+
   <xsl:import href="http://docbook.sourceforge.net/release/xsl/1.76.1/xhtml/docbook.xsl" />
 
 -->

documentation/sdk-manual/sdk-manual-eclipse-customization.xsl

@@ -5,14 +5,12 @@
 	xmlns:fo="http://www.w3.org/1999/XSL/Format"
 	version="1.0">
 
-<!--
   <xsl:import href="http://downloads.yoctoproject.org/mirror/docbook-mirror/docbook-xsl-1.76.1/eclipse/eclipse3.xsl" />
--->
+
+<!--
 
   <xsl:import href="../template/1.76.1/docbook-xsl-1.76.1/eclipse/eclipse3.xsl" />
 
-<!--
-
   <xsl:import
 	  href="http://docbook.sourceforge.net/release/xsl/1.76.1/eclipse/eclipse3.xsl" />
 

documentation/sdk-manual/sdk-manual.xml

@@ -36,6 +36,21 @@
                 <date>April 2016</date>
                 <revremark>Released with the Yocto Project 2.1 Release.</revremark>
             </revision>
+            <revision>
+                <revnumber>2.1.1</revnumber>
+                <date>August 2016</date>
+                <revremark>Released with the Yocto Project 2.1.1 Release.</revremark>
+            </revision>
+            <revision>
+                <revnumber>2.1.2</revnumber>
+                <date>December 2016</date>
+                <revremark>Released with the Yocto Project 2.1.2 Release.</revremark>
+            </revision>
+            <revision>
+                <revnumber>2.1.3</revnumber>
+                <date>June 2017</date>
+                <revremark>Released with the Yocto Project 2.1.3 Release.</revremark>
+            </revision>
        </revhistory>
 
     <copyright>
@@ -48,12 +63,46 @@
         Permission is granted to copy, distribute and/or modify this document under
         the terms of the <ulink type="http" url="http://creativecommons.org/licenses/by-sa/2.0/uk/">Creative Commons Attribution-Share Alike 2.0 UK: England &amp; Wales</ulink> as published by Creative Commons.
       </para>
-      <note>
-          For the latest version of this manual associated with this
-          Yocto Project release, see the
-          <ulink url='&YOCTO_DOCS_SDK_URL;'>Yocto Project Software Development Kit (SDK) Developer's Guide</ulink>
-          from the Yocto Project website.
-      </note>
+           <note><title>Manual Notes</title>
+               <itemizedlist>
+                   <listitem><para>
+                       This version of the
+                       <emphasis>Yocto Project Software Development Kit (SDK) Developer's Guide</emphasis>
+                       is for the &YOCTO_DOC_VERSION; release of the
+                       Yocto Project.
+                       To be sure you have the latest version of the manual
+                       for this release, go to the
+                       <ulink url='&YOCTO_HOME_URL;/documentation'>Yocto Project documentation page</ulink>
+                       and select the manual from that site.
+                       Manuals from the site are more up-to-date than manuals
+                       derived from the Yocto Project released TAR files.
+                       </para></listitem>
+                   <listitem><para>
+                       If you located this manual through a web search, the
+                       version of the manual might not be the one you want
+                       (e.g. the search might have returned a manual much
+                       older than the Yocto Project version with which you
+                       are working).
+                       You can see all Yocto Project major releases by
+                       visiting the
+                       <ulink url='&YOCTO_WIKI_URL;/wiki/Releases'>Releases</ulink>
+                       page.
+                       If you need a version of this manual for a different
+                       Yocto Project release, visit the
+                       <ulink url='&YOCTO_HOME_URL;/documentation'>Yocto Project documentation page</ulink>
+                       and select the manual set by using the
+                       "ACTIVE RELEASES DOCUMENTATION" or "DOCUMENTS ARCHIVE"
+                       pull-down menus.
+                       </para></listitem>
+                   <listitem><para>
+                       To report any inaccuracies or problems with this
+                       manual, send an email to the Yocto Project
+                       discussion group at
+                       <filename>yocto@yoctoproject.com</filename> or log into
+                       the freenode <filename>#yocto</filename> channel.
+                       </para></listitem>
+               </itemizedlist>
+           </note>
 
     </legalnotice>
 

documentation/sdk-manual/sdk-using.xml

@@ -14,7 +14,7 @@
         The tasks you can perform using a standard SDK are also applicable
         when you are using an extensible SDK.
         For information on the differences when using an extensible SDK as
-        compared to an extensible SDK, see the
+        compared to a standard SDK, see the
         "<link linkend='sdk-extensible'>Using the Extensible SDK</link>"
         chapter.
     </note>
@@ -46,7 +46,7 @@
 
     <para>
         The first thing you need to do is install the SDK on your host
-        development machine by running the <filename>.sh</filename>
+        development machine by running the <filename>*.sh</filename>
         installation script.
     </para>
 
@@ -226,7 +226,7 @@
                     </literallayout></para></listitem>
                 <listitem><para><emphasis>Populate the directory:</emphasis>
                     Create <filename>hello.c</filename>, <filename>Makefile.am</filename>,
-                    and <filename>configure.in</filename> files as follows:
+                    and <filename>configure.ac</filename> files as follows:
                     <itemizedlist>
                         <listitem><para>For <filename>hello.c</filename>, include
                             these lines:
@@ -247,8 +247,8 @@
                         <listitem><para>For <filename>configure.in</filename>,
                             include these lines:
                             <literallayout class='monospaced'>
-     AC_INIT(hello.c)
-     AM_INIT_AUTOMAKE(hello,0.1)
+     AC_INIT(hello,0.1)
+     AM_INIT_AUTOMAKE([foreign])
      AC_PROG_CC
      AC_PROG_INSTALL
      AC_OUTPUT(Makefile)
@@ -382,8 +382,8 @@
         To illustrate this, consider the following four cross-toolchain
         environment variables:
         <literallayout class='monospaced'>
-     <ulink url='&YOCTO_DOCS_REF_URL;#var-CC'>CC</ulink>=i586-poky-linux-gcc -m32 -march=i586 --sysroot=/opt/poky/1.8/sysroots/i586-poky-linux
-     <ulink url='&YOCTO_DOCS_REF_URL;#var-LD'>LD</ulink>=i586-poky-linux-ld --sysroot=/opt/poky/1.8/sysroots/i586-poky-linux
+     <ulink url='&YOCTO_DOCS_REF_URL;#var-CC'>CC</ulink>=i586-poky-linux-gcc -m32 -march=i586 --sysroot=/opt/poky/&DISTRO;/sysroots/i586-poky-linux
+     <ulink url='&YOCTO_DOCS_REF_URL;#var-LD'>LD</ulink>=i586-poky-linux-ld --sysroot=/opt/poky/&DISTRO;/sysroots/i586-poky-linux
      <ulink url='&YOCTO_DOCS_REF_URL;#var-CFLAGS'>CFLAGS</ulink>=-O2 -pipe -g -feliminate-unused-debug-types
      <ulink url='&YOCTO_DOCS_REF_URL;#var-CXXFLAGS'>CXXFLAGS</ulink>=-O2 -pipe -g -feliminate-unused-debug-types
         </literallayout>

documentation/toaster-manual/toaster-manual.xml

@@ -46,6 +46,21 @@
                 <date>April 2016</date>
                 <revremark>Released with the Yocto Project 2.1 Release.</revremark>
             </revision>
+            <revision>
+                <revnumber>2.1.1</revnumber>
+                <date>August 2016</date>
+                <revremark>Released with the Yocto Project 2.1.1 Release.</revremark>
+            </revision>
+            <revision>
+                <revnumber>2.1.2</revnumber>
+                <date>December 2016</date>
+                <revremark>Released with the Yocto Project 2.1.2 Release.</revremark>
+            </revision>
+            <revision>
+                <revnumber>2.1.3</revnumber>
+                <date>June 2017</date>
+                <revremark>Released with the Yocto Project 2.1.3 Release.</revremark>
+            </revision>
        </revhistory>
 
     <copyright>
@@ -58,12 +73,46 @@
         Permission is granted to copy, distribute and/or modify this document under
         the terms of the <ulink type="http" url="http://creativecommons.org/licenses/by-sa/2.0/uk/">Creative Commons Attribution-Share Alike 2.0 UK: England &amp; Wales</ulink> as published by Creative Commons.
       </para>
-      <note>
-          For the latest version of this manual associated with this
-          Yocto Project release, see the
-          <ulink url='&YOCTO_DOCS_TOAST_URL;'>Toaster User Manual</ulink>
-          from the Yocto Project website.
-      </note>
+           <note><title>Manual Notes</title>
+               <itemizedlist>
+                   <listitem><para>
+                       This version of the
+                       <emphasis>Toaster User Manual</emphasis>
+                       is for the &YOCTO_DOC_VERSION; release of the
+                       Yocto Project.
+                       To be sure you have the latest version of the manual
+                       for this release, go to the
+                       <ulink url='&YOCTO_HOME_URL;/documentation'>Yocto Project documentation page</ulink>
+                       and select the manual from that site.
+                       Manuals from the site are more up-to-date than manuals
+                       derived from the Yocto Project released TAR files.
+                       </para></listitem>
+                   <listitem><para>
+                       If you located this manual through a web search, the
+                       version of the manual might not be the one you want
+                       (e.g. the search might have returned a manual much
+                       older than the Yocto Project version with which you
+                       are working).
+                       You can see all Yocto Project major releases by
+                       visiting the
+                       <ulink url='&YOCTO_WIKI_URL;/wiki/Releases'>Releases</ulink>
+                       page.
+                       If you need a version of this manual for a different
+                       Yocto Project release, visit the
+                       <ulink url='&YOCTO_HOME_URL;/documentation'>Yocto Project documentation page</ulink>
+                       and select the manual set by using the
+                       "ACTIVE RELEASES DOCUMENTATION" or "DOCUMENTS ARCHIVE"
+                       pull-down menus.
+                       </para></listitem>
+                   <listitem><para>
+                       To report any inaccuracies or problems with this
+                       manual, send an email to the Yocto Project
+                       discussion group at
+                       <filename>yocto@yoctoproject.com</filename> or log into
+                       the freenode <filename>#yocto</filename> channel.
+                       </para></listitem>
+               </itemizedlist>
+           </note>
 
     </legalnotice>
 

documentation/tools/mega-manual.sed

@@ -2,32 +2,32 @@
 # This style is for manual folders like "yocto-project-qs" and "poky-ref-manual".
 # This is the old way that did it.  Can't do that now that we have "bitbake-user-manual" strings
 # in the mega-manual.
-# s/\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1\/[a-z]*-[a-z]*-[a-z]*\/[a-z]*-[a-z]*-[a-z]*.html#/\"link\" href=\"#/g
-s/\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1\/yocto-project-qs\/yocto-project-qs.html#/\"link\" href=\"#/g
-s/\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1\/poky-ref-manual\/poky-ref-manual.html#/\"link\" href=\"#/g
+# s/\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1.3\/[a-z]*-[a-z]*-[a-z]*\/[a-z]*-[a-z]*-[a-z]*.html#/\"link\" href=\"#/g
+s/\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1.3\/yocto-project-qs\/yocto-project-qs.html#/\"link\" href=\"#/g
+s/\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1.3\/poky-ref-manual\/poky-ref-manual.html#/\"link\" href=\"#/g
 
 # Processes all other manuals (<word>-<word> style) except for the BitBake User Manual because
 # it is not included in the mega-manual.
 # This style is for manual folders that use two word, which is the standard now (e.g. "ref-manual").
 # This was the one-liner that worked before we introduced the BitBake User Manual, which is
 # not in the mega-manual.
-# s/\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1\/[a-z]*-[a-z]*\/[a-z]*-[a-z]*.html#/\"link\" href=\"#/g
+# s/\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1.3\/[a-z]*-[a-z]*\/[a-z]*-[a-z]*.html#/\"link\" href=\"#/g
 
-s/\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1\/sdk-manual\/sdk-manual.html#/\"link\" href=\"#/g
-s/\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1\/bsp-guide\/bsp-guide.html#/\"link\" href=\"#/g
-s/\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1\/dev-manual\/dev-manual.html#/\"link\" href=\"#/g
-s/\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1\/kernel-dev\/kernel-dev.html#/\"link\" href=\"#/g
-s/\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1\/profile-manual\/profile-manual.html#/\"link\" href=\"#/g
-s/\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1\/ref-manual\/ref-manual.html#/\"link\" href=\"#/g
-s/\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1\/toaster-manual\/toaster-manual.html#/\"link\" href=\"#/g
-s/\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1\/yocto-project-qs\/yocto-project-qs.html#/\"link\" href=\"#/g
+s/\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1.3\/sdk-manual\/sdk-manual.html#/\"link\" href=\"#/g
+s/\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1.3\/bsp-guide\/bsp-guide.html#/\"link\" href=\"#/g
+s/\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1.3\/dev-manual\/dev-manual.html#/\"link\" href=\"#/g
+s/\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1.3\/kernel-dev\/kernel-dev.html#/\"link\" href=\"#/g
+s/\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1.3\/profile-manual\/profile-manual.html#/\"link\" href=\"#/g
+s/\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1.3\/ref-manual\/ref-manual.html#/\"link\" href=\"#/g
+s/\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1.3\/toaster-manual\/toaster-manual.html#/\"link\" href=\"#/g
+s/\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1.3\/yocto-project-qs\/yocto-project-qs.html#/\"link\" href=\"#/g
 
 # Process cases where just an external manual is referenced without an id anchor
-s/<a class=\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1\/yocto-project-qs\/yocto-project-qs.html\" target=\"_top\">Yocto Project Quick Start<\/a>/Yocto Project Quick Start/g
-s/<a class=\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1\/dev-manual\/dev-manual.html\" target=\"_top\">Yocto Project Development Manual<\/a>/Yocto Project Development Manual/g
-s/<a class=\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1\/sdk-manual\/sdk-manual.html\" target=\"_top\">Yocto Project Software Development Kit (SDK) Developer's Guide<\/a>/Yocto Project Software Development Kit (SDK) Developer's Guide/g
-s/<a class=\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1\/bsp-guide\/bsp-guide.html\" target=\"_top\">Yocto Project Board Support Package (BSP) Developer's Guide<\/a>/Yocto Project Board Support Package (BSP) Developer's Guide/g
-s/<a class=\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1\/profile-manual\/profile-manual.html\" target=\"_top\">Yocto Project Profiling and Tracing Manual<\/a>/Yocto Project Profiling and Tracing Manual/g
-s/<a class=\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1\/kernel-dev\/kernel-dev.html\" target=\"_top\">Yocto Project Linux Kernel Development Manual<\/a>/Yocto Project Linux Kernel Development Manual/g
-s/<a class=\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1\/ref-manual\/ref-manual.html\" target=\"_top\">Yocto Project Reference Manual<\/a>/Yocto Project Reference Manual/g
-s/<a class=\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1\/toaster-manual\/toaster-manual.html\" target=\"_top\">Toaster User Manual<\/a>/Toaster User Manual/g
+s/<a class=\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1.3\/yocto-project-qs\/yocto-project-qs.html\" target=\"_top\">Yocto Project Quick Start<\/a>/Yocto Project Quick Start/g
+s/<a class=\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1.3\/dev-manual\/dev-manual.html\" target=\"_top\">Yocto Project Development Manual<\/a>/Yocto Project Development Manual/g
+s/<a class=\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1.3\/sdk-manual\/sdk-manual.html\" target=\"_top\">Yocto Project Software Development Kit (SDK) Developer's Guide<\/a>/Yocto Project Software Development Kit (SDK) Developer's Guide/g
+s/<a class=\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1.3\/bsp-guide\/bsp-guide.html\" target=\"_top\">Yocto Project Board Support Package (BSP) Developer's Guide<\/a>/Yocto Project Board Support Package (BSP) Developer's Guide/g
+s/<a class=\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1.3\/profile-manual\/profile-manual.html\" target=\"_top\">Yocto Project Profiling and Tracing Manual<\/a>/Yocto Project Profiling and Tracing Manual/g
+s/<a class=\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1.3\/kernel-dev\/kernel-dev.html\" target=\"_top\">Yocto Project Linux Kernel Development Manual<\/a>/Yocto Project Linux Kernel Development Manual/g
+s/<a class=\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1.3\/ref-manual\/ref-manual.html\" target=\"_top\">Yocto Project Reference Manual<\/a>/Yocto Project Reference Manual/g
+s/<a class=\"ulink\" href=\"http:\/\/www.yoctoproject.org\/docs\/2.1.3\/toaster-manual\/toaster-manual.html\" target=\"_top\">Toaster User Manual<\/a>/Toaster User Manual/g

documentation/yocto-project-qs/yocto-project-qs.xml

@@ -16,12 +16,46 @@
                 Permission is granted to copy, distribute and/or modify this document under
                 the terms of the <ulink type="http" url="http://creativecommons.org/licenses/by-sa/2.0/uk/">Creative Commons Attribution-Share Alike 2.0 UK: England &amp; Wales</ulink> as published by Creative Commons.
             </para>
-            <note>
-                For the latest version of this manual associated with this
-                Yocto Project release, see the
-                <ulink url='&YOCTO_DOCS_QS_URL;'>Yocto Project Quick Start</ulink>
-                from the Yocto Project website.
-            </note>
+           <note><title>Manual Notes</title>
+               <itemizedlist>
+                   <listitem><para>
+                       This version of the
+                       <emphasis>Yocto Project Quick Start</emphasis>
+                       is for the &YOCTO_DOC_VERSION; release of the
+                       Yocto Project.
+                       To be sure you have the latest version of the manual
+                       for this release, go to the
+                       <ulink url='&YOCTO_HOME_URL;/documentation'>Yocto Project documentation page</ulink>
+                       and select the manual from that site.
+                       Manuals from the site are more up-to-date than manuals
+                       derived from the Yocto Project released TAR files.
+                       </para></listitem>
+                   <listitem><para>
+                       If you located this manual through a web search, the
+                       version of the manual might not be the one you want
+                       (e.g. the search might have returned a manual much
+                       older than the Yocto Project version with which you
+                       are working).
+                       You can see all Yocto Project major releases by
+                       visiting the
+                       <ulink url='&YOCTO_WIKI_URL;/wiki/Releases'>Releases</ulink>
+                       page.
+                       If you need a version of this manual for a different
+                       Yocto Project release, visit the
+                       <ulink url='&YOCTO_HOME_URL;/documentation'>Yocto Project documentation page</ulink>
+                       and select the manual set by using the
+                       "ACTIVE RELEASES DOCUMENTATION" or "DOCUMENTS ARCHIVE"
+                       pull-down menus.
+                       </para></listitem>
+                   <listitem><para>
+                       To report any inaccuracies or problems with this
+                       manual, send an email to the Yocto Project
+                       discussion group at
+                       <filename>yocto@yoctoproject.com</filename> or log into
+                       the freenode <filename>#yocto</filename> channel.
+                       </para></listitem>
+               </itemizedlist>
+           </note>
         </legalnotice>
 
 
@@ -689,21 +723,37 @@
                     </para>
                     </note>
                     </para></listitem>
-                <listitem><para><emphasis>Build a Minimal Image for MinnowBoard MAX:</emphasis>
-                    Use the following command to build the minimal image for
+                <listitem><para><emphasis>Build an Image for MinnowBoard MAX:</emphasis>
+                    The type of image you build depends on your goals.
+                    For example, the previous build created a
+                    <filename>core-image-sato</filename> image, which is an
+                    image with Sato support.
+                    It is possible to build many image types for the
                     MinnowBoard MAX.
-                    Because configuration changes are minimal to set up for
-                    this second build, the OpenEmbedded build system can
+                    Some possibilities are <filename>core-image-base</filename>,
+                    which is a console-only image.
+                    Another choice could be a
+                    <filename>core-image-full-cmdline</filename>, which is
+                    another console-only image but has more full-features
+                    Linux system functionality installed.
+                    For types of images you can build using the Yocto
+                    Project, see the
+                    "<ulink url='&YOCTO_DOCS_REF_URL;#ref-images'>Images</ulink>"
+                    chapter in the Yocto Project Reference Manual.</para>
+                    <para>Because configuration changes are minimal to set up
+                    for this second build, the OpenEmbedded build system can
                     re-use files from previous builds as much as possible.
                     Re-using files means this second build will be much faster
                     than an initial build.
+                    For this example, the <filename>core-image-base</filename>
+                    image is built:
                     <literallayout class='monospaced'>
-     $ bitbake core-image-minimal
+     $ bitbake core-image-base
                     </literallayout>
-                    Once the build completes, the resulting basic console image
+                    Once the build completes, the resulting console-only image
                     is located in the Build Directory here:
                     <literallayout class='monospaced'>
-     tmp/deploy/images/intel-corei7-64/core-image-minimal-intel-corei7-64.hddimg
+     tmp/deploy/images/intel-corei7-64/core-image-base-intel-corei7-64.hddimg
                     </literallayout>
                     </para></listitem>
                 <listitem><para><emphasis>Write the Image:</emphasis>
@@ -714,7 +764,7 @@
                     <filename>scripts/contrib/mkefidisk.sh</filename>:
                     <literallayout class='monospaced'>
      $ sudo $HOME/source/poky/scripts/contrib/mkefidisk.sh <replaceable>HOST_DEVICE</replaceable> \
-        tmp/deploy/images/intel-corei7-64/core-image-minimal-intel-corei7-64.hddimg <replaceable>TARGET_DEVICE</replaceable>
+        tmp/deploy/images/intel-corei7-64/core-image-base-intel-corei7-64.hddimg <replaceable>TARGET_DEVICE</replaceable>
                     </literallayout>
                     In the previous command,
                     <replaceable>HOST_DEVICE</replaceable> is the device node

meta-poky/conf/distro/poky.conf

@@ -1,6 +1,6 @@
 DISTRO = "poky"
 DISTRO_NAME = "Poky (Yocto Project Reference Distro)"
-DISTRO_VERSION = "2.1"
+DISTRO_VERSION = "2.1.3"
 DISTRO_CODENAME = "krogoth"
 SDK_VENDOR = "-pokysdk"
 SDK_VERSION := "${@'${DISTRO_VERSION}'.replace('snapshot-${DATE}','snapshot')}"

meta-poky/conf/local.conf.sample

@@ -192,7 +192,7 @@ PATCHRESOLVE = "noop"
 # files and damages the build in ways which may not be easily recoverable.
 # It's necesary to monitor /tmp, if there is no space left the build will fail
 # with very exotic errors.
-BB_DISKMON_DIRS = "\
+BB_DISKMON_DIRS ??= "\
     STOPTASKS,${TMPDIR},1G,100K \
     STOPTASKS,${DL_DIR},1G,100K \
     STOPTASKS,${SSTATE_DIR},1G,100K \

meta-poky/conf/toasterconf.json

@@ -40,23 +40,17 @@
             "name": "OpenEmbedded",
             "sourcetype": "layerindex",
             "apiurl": "http://layers.openembedded.org/layerindex/api/",
-            "branches": ["master", "jethro", "krogoth"]
+            "branches": ["jethro", "krogoth"]
         },
         {
             "name": "Imported layers",
             "sourcetype": "imported",
             "apiurl": "",
-            "branches": ["master", "jethro", "krogoth", "HEAD"]
+            "branches": ["jethro", "krogoth", "HEAD"]
 
         }
     ],
     "bitbake" : [
-        {
-            "name": "master",
-            "giturl": "remote:origin",
-            "branch": "master",
-            "dirpath": "bitbake"
-        },
         {
             "name": "jethro",
             "giturl": "remote:origin",
@@ -77,18 +71,9 @@
         }
     ],
 
-    "defaultrelease": "master",
+    "defaultrelease": "krogoth",
 
     "releases": [
-        {
-            "name": "master",
-            "description": "Yocto Project master",
-            "bitbake": "master",
-            "branch": "master",
-            "defaultlayers": [ "openembedded-core", "meta-poky", "meta-yocto-bsp"],
-            "layersourcepriority": { "Imported layers": 99, "Local Yocto Project" : 10, "OpenEmbedded" :  0 },
-            "helptext": "Toaster will run your builds using the tip of the <a href=\"http://git.yoctoproject.org/cgit/cgit.cgi/poky/log/\">Yocto Project master branch</a>, where active development takes place. This is not a stable branch, so your builds might not work as expected."
-        },
         {
             "name": "jethro",
             "description": "Yocto Project 2.0 Jethro",

meta-yocto-bsp/recipes-kernel/linux/linux-yocto_4.1.bbappend

@@ -7,11 +7,11 @@ KBRANCH_mpc8315e-rdb = "standard/fsl-mpc8315e-rdb"
 KMACHINE_genericx86 ?= "common-pc"
 KMACHINE_genericx86-64 ?= "common-pc-64"
 
-SRCREV_machine_genericx86    ?= "304caa9480f19875e717faf3cad8cb7ecd758733"
-SRCREV_machine_genericx86-64 ?= "304caa9480f19875e717faf3cad8cb7ecd758733"
-SRCREV_machine_edgerouter ?= "79a31b9d23db126f8a6be3eb88fd683056a213f1"
-SRCREV_machine_beaglebone ?= "efb6ffb2ca96a364f916c9890ad023fc595e0e6e"
-SRCREV_machine_mpc8315e-rdb ?= "79a31b9d23db126f8a6be3eb88fd683056a213f1"
+SRCREV_machine_genericx86    ?= "f4d0900b2851e829e990e0f64b09ed3b8e355fae"
+SRCREV_machine_genericx86-64 ?= "f4d0900b2851e829e990e0f64b09ed3b8e355fae"
+SRCREV_machine_edgerouter ?= "f4d0900b2851e829e990e0f64b09ed3b8e355fae"
+SRCREV_machine_beaglebone ?= "12532e753b50997690923e03edb3ac3368817a26"
+SRCREV_machine_mpc8315e-rdb ?= "f4d0900b2851e829e990e0f64b09ed3b8e355fae"
 
 COMPATIBLE_MACHINE_genericx86 = "genericx86"
 COMPATIBLE_MACHINE_genericx86-64 = "genericx86-64"
@@ -19,5 +19,8 @@ COMPATIBLE_MACHINE_edgerouter = "edgerouter"
 COMPATIBLE_MACHINE_beaglebone = "beaglebone"
 COMPATIBLE_MACHINE_mpc8315e-rdb = "mpc8315e-rdb"
 
-LINUX_VERSION_genericx86 = "4.1.18"
-LINUX_VERSION_genericx86-64 = "4.1.18"
+LINUX_VERSION_genericx86 = "4.1.33"
+LINUX_VERSION_genericx86-64 = "4.1.33"
+LINUX_VERSION_edgerouter = "4.1.33"
+LINUX_VERSION_beaglebone = "4.1.33"
+LINUX_VERSION_mpc8315e-rdb = "4.1.33"

meta-yocto-bsp/recipes-kernel/linux/linux-yocto_4.4.bbappend

@@ -7,11 +7,11 @@ KBRANCH_edgerouter = "standard/edgerouter"
 KBRANCH_beaglebone = "standard/beaglebone"
 KBRANCH_mpc8315e-rdb = "standard/fsl-mpc8315e-rdb"
 
-SRCREV_machine_genericx86    ?= "3d2455f9da30f923c6bd69014fad4cc4ea738be6"
-SRCREV_machine_genericx86-64 ?= "3d2455f9da30f923c6bd69014fad4cc4ea738be6"
-SRCREV_machine_edgerouter ?= "ff4c4ef15b51f45b9106d71bf1f62fe7c02e63c2"
-SRCREV_machine_beaglebone ?= "ff4c4ef15b51f45b9106d71bf1f62fe7c02e63c2"
-SRCREV_machine_mpc8315e-rdb ?= "df00877ef9387b38b9601c82db57de2a1b23ce53"
+SRCREV_machine_genericx86    ?= "ca6a08bd7f86ebef11f763d26f787f7d65270473"
+SRCREV_machine_genericx86-64 ?= "ca6a08bd7f86ebef11f763d26f787f7d65270473"
+SRCREV_machine_edgerouter ?= "ca6a08bd7f86ebef11f763d26f787f7d65270473"
+SRCREV_machine_beaglebone ?= "ca6a08bd7f86ebef11f763d26f787f7d65270473"
+SRCREV_machine_mpc8315e-rdb ?= "7fa42ad9a43ca4bb1e578e208ffeddae2d6150e2"
 
 COMPATIBLE_MACHINE_genericx86 = "genericx86"
 COMPATIBLE_MACHINE_genericx86-64 = "genericx86-64"
@@ -19,5 +19,8 @@ COMPATIBLE_MACHINE_edgerouter = "edgerouter"
 COMPATIBLE_MACHINE_beaglebone = "beaglebone"
 COMPATIBLE_MACHINE_mpc8315e-rdb = "mpc8315e-rdb"
 
-LINUX_VERSION_genericx86 = "4.4.3"
-LINUX_VERSION_genericx86-64 = "4.4.3"
+LINUX_VERSION_genericx86 = "4.4.26"
+LINUX_VERSION_genericx86-64 = "4.4.26"
+LINUX_VERSION_edgerouter = "4.4.26"
+LINUX_VERSION_beaglebone = "4.4.26"
+LINUX_VERSION_mpc8315e-rdb = "4.4.26"

meta/classes/archiver.bbclass

@@ -270,9 +270,10 @@ python do_unpack_and_patch() {
         return
     ar_outdir = d.getVar('ARCHIVER_OUTDIR', True)
     ar_workdir = d.getVar('ARCHIVER_WORKDIR', True)
+    pn = d.getVar('PN', True)
 
     # The kernel class functions require it to be on work-shared, so we dont change WORKDIR
-    if not bb.data.inherits_class('kernel-yocto', d):
+    if not (bb.data.inherits_class('kernel-yocto', d) or pn.startswith('gcc-source')):
         # Change the WORKDIR to make do_unpack do_patch run in another dir.
         d.setVar('WORKDIR', ar_workdir)
 
@@ -290,7 +291,7 @@ python do_unpack_and_patch() {
         oe.path.copytree(src, src_orig)
 
     # Make sure gcc and kernel sources are patched only once
-    if not ((d.getVar('SRC_URI', True) == "" or bb.data.inherits_class('kernel-yocto', d))):
+    if not (d.getVar('SRC_URI', True) == "" or (bb.data.inherits_class('kernel-yocto', d) or pn.startswith('gcc-source'))):
         bb.build.exec_func('do_patch', d)
 
     # Create the patches

meta/classes/autotools.bbclass

@@ -77,6 +77,8 @@ CONFIGUREOPTS = " --build=${BUILD_SYS} \
 		  ${@append_libtool_sysroot(d)}"
 CONFIGUREOPT_DEPTRACK ?= "--disable-dependency-tracking"
 
+CACHED_CONFIGUREVARS ?= ""
+
 AUTOTOOLS_SCRIPT_PATH ?= "${S}"
 CONFIGURE_SCRIPT ?= "${AUTOTOOLS_SCRIPT_PATH}/configure"
 
@@ -227,6 +229,8 @@ python autotools_copy_aclocals () {
 }
 autotools_copy_aclocals[vardepsexclude] += "MACHINE SDK_ARCH BUILD_ARCH SDK_OS BB_TASKDEPDATA"
 
+CONFIGURE_FILES = "${S}/configure.in ${S}/configure.ac ${S}/config.h.in ${S}/acinclude.m4 Makefile.am"
+
 autotools_do_configure() {
 	# WARNING: gross hack follows:
 	# An autotools built package generally needs these scripts, however only

meta/classes/base.bbclass

@@ -105,6 +105,9 @@ def get_lic_checksum_file_list(d):
         # any others should be covered by SRC_URI.
         try:
             path = bb.fetch.decodeurl(url)[2]
+            if not path:
+                raise bb.fetch.MalformedUrl(url)
+
             if path[0] == '/':
                 if path.startswith(tmpdir):
                     continue
@@ -133,23 +136,21 @@ python base_do_fetch() {
 
 addtask unpack after do_fetch
 do_unpack[dirs] = "${WORKDIR}"
+
+python () {
+    if d.getVar('S', True) != d.getVar('WORKDIR', True):
+        d.setVarFlag('do_unpack', 'cleandirs', '${S}')
+    else:
+        d.setVarFlag('do_unpack', 'cleandirs', os.path.join('${S}', 'patches'))
+}
 python base_do_unpack() {
     src_uri = (d.getVar('SRC_URI', True) or "").split()
     if len(src_uri) == 0:
         return
 
-    rootdir = d.getVar('WORKDIR', True)
-
-    # Ensure that we cleanup ${S}/patches
-    # TODO: Investigate if we can remove
-    # the entire ${S} in this case.
-    s_dir = d.getVar('S', True)
-    p_dir = os.path.join(s_dir, 'patches')
-    bb.utils.remove(p_dir, True)
-
     try:
         fetcher = bb.fetch2.Fetch(src_uri, d)
-        fetcher.unpack(rootdir)
+        fetcher.unpack(d.getVar('WORKDIR', True))
     except bb.fetch2.BBFetchException as e:
         raise bb.build.FuncFailed(e)
 }

meta/classes/cmake.bbclass

@@ -84,6 +84,8 @@ EOF
 
 addtask generate_toolchain_file after do_patch before do_configure
 
+CONFIGURE_FILES = "CMakeLists.txt"
+
 cmake_do_configure() {
 	if [ "${OECMAKE_BUILDPATH}" ]; then
 		bbnote "cmake.bbclass no longer uses OECMAKE_BUILDPATH.  The default behaviour is now out-of-tree builds with B=WORKDIR/build."
@@ -108,15 +110,15 @@ cmake_do_configure() {
 	  ${OECMAKE_SITEFILE} \
 	  ${OECMAKE_SOURCEPATH} \
 	  -DCMAKE_INSTALL_PREFIX:PATH=${prefix} \
-	  -DCMAKE_INSTALL_BINDIR:PATH=${bindir} \
-	  -DCMAKE_INSTALL_SBINDIR:PATH=${sbindir} \
-	  -DCMAKE_INSTALL_LIBEXECDIR:PATH=${libexecdir} \
+	  -DCMAKE_INSTALL_BINDIR:PATH=${@os.path.relpath(d.getVar('bindir', True), d.getVar('prefix', True))} \
+	  -DCMAKE_INSTALL_SBINDIR:PATH=${@os.path.relpath(d.getVar('sbindir', True), d.getVar('prefix', True))} \
+	  -DCMAKE_INSTALL_LIBEXECDIR:PATH=${@os.path.relpath(d.getVar('libexecdir', True), d.getVar('prefix', True))} \
 	  -DCMAKE_INSTALL_SYSCONFDIR:PATH=${sysconfdir} \
-	  -DCMAKE_INSTALL_SHAREDSTATEDIR:PATH=${sharedstatedir} \
+	  -DCMAKE_INSTALL_SHAREDSTATEDIR:PATH=${@os.path.relpath(d.getVar('sharedstatedir', True), d.  getVar('prefix', True))} \
 	  -DCMAKE_INSTALL_LOCALSTATEDIR:PATH=${localstatedir} \
-	  -DCMAKE_INSTALL_LIBDIR:PATH=${libdir} \
-	  -DCMAKE_INSTALL_INCLUDEDIR:PATH=${includedir} \
-	  -DCMAKE_INSTALL_DATAROOTDIR:PATH=${datadir} \
+	  -DCMAKE_INSTALL_LIBDIR:PATH=${@os.path.relpath(d.getVar('libdir', True), d.getVar('prefix', True))} \
+	  -DCMAKE_INSTALL_INCLUDEDIR:PATH=${@os.path.relpath(d.getVar('includedir', True), d.getVar('prefix', True))} \
+	  -DCMAKE_INSTALL_DATAROOTDIR:PATH=${@os.path.relpath(d.getVar('datadir', True), d.getVar('prefix', True))} \
 	  -DCMAKE_INSTALL_SO_NO_EXE=0 \
 	  -DCMAKE_TOOLCHAIN_FILE=${WORKDIR}/toolchain.cmake \
 	  -DCMAKE_VERBOSE_MAKEFILE=1 \

meta/classes/cml1.bbclass

@@ -42,6 +42,7 @@ python do_menuconfig() {
 }
 do_menuconfig[depends] += "ncurses-native:do_populate_sysroot"
 do_menuconfig[nostamp] = "1"
+do_menuconfig[dirs] = "${B}"
 addtask menuconfig after do_configure
 
 python do_diffconfig() {
@@ -73,4 +74,5 @@ python do_diffconfig() {
 }
 
 do_diffconfig[nostamp] = "1"
+do_diffconfig[dirs] = "${B}"
 addtask diffconfig

meta/classes/cross-canadian.bbclass

@@ -68,6 +68,7 @@ python () {
     elif tarch == "mips64":
         d.appendVar("CANADIANEXTRAOS", " linux-gnun32 linux-uclibcn32 linux-musln32")
     if tarch == "arm" or tarch == "armeb":
+        d.appendVar("CANADIANEXTRAOS", " linux-musleabi linux-uclibceabi")
         d.setVar("TARGET_OS", "linux-gnueabi")
     else:
         d.setVar("TARGET_OS", "linux")

meta/classes/cross.bbclass

@@ -17,6 +17,8 @@ HOST_CC_ARCH = "${BUILD_CC_ARCH}"
 HOST_LD_ARCH = "${BUILD_LD_ARCH}"
 HOST_AS_ARCH = "${BUILD_AS_ARCH}"
 
+export lt_cv_sys_lib_dlsearch_path_spec = "${libdir} ${base_libdir} /lib /lib64 /usr/lib /usr/lib64"
+
 STAGING_DIR_HOST = "${STAGING_DIR}/${HOST_ARCH}${HOST_VENDOR}-${HOST_OS}"
 
 PACKAGE_ARCH = "${BUILD_ARCH}"

meta/classes/devshell.bbclass

@@ -65,7 +65,6 @@ def devpyshell(d):
         os.dup2(m, sys.stdout.fileno())
         os.dup2(m, sys.stderr.fileno())
 
-        sys.stdout = os.fdopen(sys.stdout.fileno(), 'w', 0)
         sys.stdin = os.fdopen(sys.stdin.fileno(), 'r', 0)
 
         bb.utils.nonblockingfd(sys.stdout)

meta/classes/externalsrc.bbclass

@@ -89,6 +89,7 @@ python () {
         # function is run every time
         d.setVar('BB_DONT_CACHE', '1')
         d.setVarFlag('do_compile', 'file-checksums', '${@srctree_hash_files(d)}')
+        d.setVarFlag('do_configure', 'file-checksums', '${@srctree_configure_hash_files(d)}')
 
         # We don't want the workdir to go away
         d.appendVar('RM_WORK_EXCLUDE', ' ' + d.getVar('PN', True))
@@ -152,3 +153,24 @@ def srctree_hash_files(d):
     else:
         ret = d.getVar('EXTERNALSRC', True) + '/*:True'
     return ret
+
+def srctree_configure_hash_files(d):
+    """
+    Get the list of files that should trigger do_configure to re-execute,
+    based on the value of CONFIGURE_FILES
+    """
+    in_files = (d.getVar('CONFIGURE_FILES', True) or '').split()
+    out_items = []
+    search_files = []
+    for entry in in_files:
+        if entry.startswith('/'):
+            out_items.append('%s:%s' % (entry, os.path.exists(entry)))
+        else:
+            search_files.append(entry)
+    if search_files:
+        s_dir = d.getVar('EXTERNALSRC', True)
+        for root, _, files in os.walk(s_dir):
+            for f in files:
+                if f in search_files:
+                    out_items.append('%s:True' % os.path.join(root, f))
+    return ' '.join(out_items)

meta/classes/gobject-introspection.bbclass

@@ -3,13 +3,23 @@
 # This sets up autoconf-based recipes to build introspection data (or not),
 # depending on distro and machine features (see gobject-introspection-data class).
 inherit gobject-introspection-data
-EXTRA_OECONF_prepend = "${@bb.utils.contains('GI_DATA_ENABLED', 'True', '--enable-introspection', '--disable-introspection', d)} "
+EXTRA_OECONF_prepend_class-target = "${@bb.utils.contains('GI_DATA_ENABLED', 'True', '--enable-introspection', '--disable-introspection', d)} "
+
+# When building native recipes, disable introspection, as it is not necessary,
+# pulls in additional dependencies, and makes build times longer
+EXTRA_OECONF_prepend_class-native = "--disable-introspection "
+EXTRA_OECONF_prepend_class-nativesdk = "--disable-introspection "
 
 UNKNOWN_CONFIGURE_WHITELIST_append = " --enable-introspection --disable-introspection"
 
 # Generating introspection data depends on a combination of native and target
 # introspection tools, and qemu to run the target tools.
-DEPENDS_append = " gobject-introspection gobject-introspection-native qemu-native"
+DEPENDS_append_class-target = " gobject-introspection gobject-introspection-native qemu-native"
+
+# Even though introspection is disabled on -native, gobject-introspection package is still
+# needed for m4 macros.
+DEPENDS_append_class-native = " gobject-introspection-native"
+DEPENDS_append_class-nativesdk = " gobject-introspection-native"
 
 # This is necessary for python scripts to succeed - distutils fails if these
 # are not set

meta/classes/grub-efi.bbclass

@@ -93,7 +93,7 @@ python build_efi_cfg() {
     try:
          cfgfile = file(cfile, 'w')
     except OSError:
-        raise bb.build.funcFailed('Unable to open %s' % (cfile))
+        raise bb.build.FuncFailed('Unable to open %s' % (cfile))
 
     cfgfile.write('# Automatically created by OE\n')
 

meta/classes/gummiboot.bbclass

@@ -72,7 +72,7 @@ python build_efi_cfg() {
     try:
          cfgfile = open(cfile, 'w')
     except OSError:
-        raise bb.build.funcFailed('Unable to open %s' % (cfile))
+        raise bb.build.FuncFailed('Unable to open %s' % (cfile))
 
     cfgfile.write('# Automatically created by OE\n')
     cfgfile.write('default %s\n' % (labels.split()[0]))
@@ -95,7 +95,7 @@ python build_efi_cfg() {
         try:
             entrycfg = open(entryfile, "w")
         except OSError:
-            raise bb.build.funcFailed('Unable to open %s' % (entryfile))
+            raise bb.build.FuncFailed('Unable to open %s' % (entryfile))
         localdata.setVar('OVERRIDES', label + ':' + overrides)
         bb.data.update_data(localdata)
 

meta/classes/image-vm.bbclass

@@ -23,16 +23,17 @@ do_bootdirectdisk[depends] += "dosfstools-native:do_populate_sysroot \
                                syslinux-native:do_populate_sysroot \
                                parted-native:do_populate_sysroot \
                                mtools-native:do_populate_sysroot \
-                               ${PN}:do_image_ext4 \
+                               ${PN}:do_image_${VM_ROOTFS_TYPE} \
                                "
 
-IMAGE_TYPEDEP_vmdk = "ext4"
-IMAGE_TYPEDEP_vdi = "ext4"
-IMAGE_TYPEDEP_qcow2 = "ext4"
-IMAGE_TYPEDEP_hdddirect = "ext4"
+IMAGE_TYPEDEP_vmdk = "${VM_ROOTFS_TYPE}"
+IMAGE_TYPEDEP_vdi = "${VM_ROOTFS_TYPE}"
+IMAGE_TYPEDEP_qcow2 = "${VM_ROOTFS_TYPE}"
+IMAGE_TYPEDEP_hdddirect = "${VM_ROOTFS_TYPE}"
 IMAGE_TYPES_MASKED += "vmdk vdi qcow2 hdddirect"
 
-ROOTFS ?= "${DEPLOY_DIR_IMAGE}/${IMAGE_LINK_NAME}.ext4"
+VM_ROOTFS_TYPE ?= "ext4"
+ROOTFS ?= "${DEPLOY_DIR_IMAGE}/${IMAGE_LINK_NAME}.${VM_ROOTFS_TYPE}"
 
 # Used by bootloader
 LABELS_VM ?= "boot"

meta/classes/image.bbclass

@@ -166,7 +166,7 @@ python () {
         if temp:
             bb.fatal("%s contains conflicting IMAGE_FEATURES %s %s" % (d.getVar('PN', True), feature, ' '.join(list(temp))))
 
-    d.setVar('IMAGE_FEATURES', ' '.join(list(remain_features)))
+    d.setVar('IMAGE_FEATURES', ' '.join(sorted(list(remain_features))))
 
     check_image_features(d)
     initramfs_image = d.getVar('INITRAMFS_IMAGE', True) or ""
@@ -388,19 +388,27 @@ python () {
             bb.fatal("No IMAGE_CMD defined for IMAGE_FSTYPES entry '%s' - possibly invalid type name or missing support class" % t)
         cmds.append(localdata.expand("\tcd ${DEPLOY_DIR_IMAGE}"))
 
+        # Since a copy of IMAGE_CMD_xxx will be inlined within do_image_xxx,
+        # prevent a redundant copy of IMAGE_CMD_xxx being emitted as a function.
+        d.delVarFlag('IMAGE_CMD_' + realt, 'func')
+
         rm_tmp_images = set()
         def gen_conversion_cmds(bt):
             for ctype in ctypes:
-                if bt.endswith("." + ctype):
+                if bt[bt.find('.') + 1:] == ctype:
                     type = bt[0:-len(ctype) - 1]
                     if type.startswith("debugfs_"):
                         type = type[8:]
                     # Create input image first.
                     gen_conversion_cmds(type)
                     localdata.setVar('type', type)
-                    cmds.append("\t" + localdata.getVar("COMPRESS_CMD_" + ctype, True))
+                    cmd = "\t" + localdata.getVar("COMPRESS_CMD_" + ctype, True)
+                    if cmd not in cmds:
+                        cmds.append(cmd)
                     vardeps.add('COMPRESS_CMD_' + ctype)
-                    subimages.append(type + "." + ctype)
+                    subimage = type + "." + ctype
+                    if subimage not in subimages:
+                        subimages.append(subimage)
                     if type not in alltypes:
                         rm_tmp_images.add(localdata.expand("${IMAGE_NAME}${IMAGE_NAME_SUFFIX}.${type}"))
 

meta/classes/image_types.bbclass

@@ -11,32 +11,28 @@ IMAGE_ROOTFS_ALIGNMENT ?= "1"
 
 def imagetypes_getdepends(d):
     def adddep(depstr, deps):
-        for i in (depstr or "").split():
-            if i not in deps:
-                deps.append(i)
+        for d in (depstr or "").split():
+            # Add task dependency if not already present
+            if ":" not in d:
+                d += ":do_populate_sysroot"
+            deps.add(d)
 
-    deps = []
-    ctypes = d.getVar('COMPRESSIONTYPES', True).split()
     fstypes = set((d.getVar('IMAGE_FSTYPES', True) or "").split())
     fstypes |= set((d.getVar('IMAGE_FSTYPES_DEBUGFS', True) or "").split())
-    for type in fstypes:
-        if type in ["vmdk", "vdi", "qcow2", "hdddirect", "live", "iso", "hddimg"]:
-            type = "ext4"
-        basetype = type
-        for ctype in ctypes:
-            if type.endswith("." + ctype):
-                basetype = type[:-len("." + ctype)]
-                adddep(d.getVar("COMPRESS_DEPENDS_%s" % ctype, True), deps)
-                break
+
+    deps = set()
+    for typestring in fstypes:
+        types = typestring.split(".")
+        basetype, resttypes = types[0], types[1:]
+
+        adddep(d.getVar('IMAGE_DEPENDS_%s' % basetype, True) , deps)
         for typedepends in (d.getVar("IMAGE_TYPEDEP_%s" % basetype, True) or "").split():
             adddep(d.getVar('IMAGE_DEPENDS_%s' % typedepends, True) , deps)
-        adddep(d.getVar('IMAGE_DEPENDS_%s' % basetype, True) , deps)
-
-    depstr = ""
-    for dep in deps:
-        depstr += " " + dep + ":do_populate_sysroot"
-    return depstr
+        for ctype in resttypes:
+            adddep(d.getVar("COMPRESS_DEPENDS_%s" % ctype, True), deps)
 
+    # Sort the set so that ordering is consistant
+    return " ".join(sorted(deps))
 
 XZ_COMPRESSION_LEVEL ?= "-e -6"
 XZ_INTEGRITY_CHECK ?= "crc32"

meta/classes/insane.bbclass

@@ -672,7 +672,7 @@ def package_qa_check_symlink_to_sysroot(path, name, d, elf, messages):
                 trimmed = path.replace(os.path.join (d.getVar("PKGDEST", True), name), "")
                 package_qa_add_message(messages, "symlink-to-sysroot", "Symlink %s in %s points to TMPDIR" % (trimmed, name))
 
-def package_qa_check_license(workdir, d):
+def package_qa_check_license(d):
     """
     Check for changes in the license files 
     """
@@ -1211,7 +1211,7 @@ Missing inherit gettext?""" % (gt, config))
     # Check license variables
     ###########################################################################
 
-    package_qa_check_license(workdir, d)
+    package_qa_check_license(d)
 
     ###########################################################################
     # Check unrecognised configure options (with a white list)

meta/classes/kernel-uimage.bbclass

@@ -13,7 +13,7 @@ python __anonymous () {
 	# KEEPUIMAGE == yes. Otherwise, we pack compressed vmlinux into
 	# the uImage .
 	if d.getVar("KEEPUIMAGE", True) != 'yes':
-            d.setVar("KERNEL_IMAGETYPE_FOR_MAKE", "zImage")
+            d.setVar("KERNEL_IMAGETYPE_FOR_MAKE", "vmlinux")
 }
 
 do_uboot_mkimage() {

meta/classes/kernel-yocto.bbclass

@@ -170,15 +170,20 @@ do_patch() {
 		fi
 	fi
 
-        current_branch=`git rev-parse --abbrev-ref HEAD`
-        machine_branch="${@ get_machine_branch(d, "${KBRANCH}" )}"
-        if [ "${current_branch}" != "${machine_branch}" ]; then
-            bbwarn "After meta data application, the kernel tree branch is ${current_branch}. The"
-            bbwarn "SRC_URI specified branch ${machine_branch}. The branch will be forced to ${machine_branch},"
-            bbwarn "but this means the board meta data (.scc files) do not match the SRC_URI specification."
-            bbwarn "The meta data and branch ${machine_branch} should be inspected to ensure the proper"
-            bbwarn "kernel is being built."
-            git checkout -f ${machine_branch}
+        if [ -n "${KMETA_AUDIT}" ]; then
+            current_branch=`git rev-parse --abbrev-ref HEAD`
+            machine_branch="${@ get_machine_branch(d, "${KBRANCH}" )}"
+            if [ "${current_branch}" != "${machine_branch}" ]; then
+                bbwarn "After meta data application, the kernel tree branch is ${current_branch}."
+                bbwarn "The SRC_URI specified branch ${machine_branch}."
+                bbwarn ""
+                bbwarn "The branch will be forced to ${machine_branch}, but this means the board meta data"
+                bbwarn "(.scc files) do not match the SRC_URI specification."
+                bbwarn ""
+                bbwarn "The meta data and branch ${machine_branch} should be inspected to ensure the proper"
+                bbwarn "kernel is being built."
+                git checkout -f ${machine_branch}
+            fi
         fi
 
 	if [ "${machine_srcrev}" != "AUTOINC" ]; then

meta/classes/metadata_scm.bbclass

@@ -4,8 +4,7 @@ METADATA_REVISION ?= "${@base_detect_revision(d)}"
 def base_detect_revision(d):
     path = base_get_scmbasepath(d)
 
-    scms = [base_get_metadata_git_revision, \
-            base_get_metadata_svn_revision]
+    scms = [base_get_metadata_git_revision]
 
     for scm in scms:
         rev = scm(path, d)
@@ -27,7 +26,7 @@ def base_detect_branch(d):
     return "<unknown>"
 
 def base_get_scmbasepath(d):
-    return d.getVar( 'COREBASE', True)
+    return os.path.join(d.getVar('COREBASE', True), 'meta')
 
 def base_get_metadata_monotone_branch(path, d):
     monotone_branch = "<unknown>"

meta/classes/multilib_global.bbclass

@@ -72,6 +72,7 @@ def preferred_ml_updates(d):
             pkg = pkg.replace("virtual/", "")
             virt = "virtual/"
         for p in prefixes:
+            newval = None
             if pkg != "kernel":
                 newval = p + "-" + val
 
@@ -86,7 +87,7 @@ def preferred_ml_updates(d):
 
             # implement alternative multilib name
             newname = localdata.expand("PREFERRED_PROVIDER_" + virt + p + "-" + pkg)
-            if not d.getVar(newname, False):
+            if not d.getVar(newname, False) and newval != None:
                 d.setVar(newname, localdata.expand(newval))
         # Avoid future variable key expansion
         provexp = d.expand(prov)

meta/classes/multilib_header.bbclass

@@ -52,3 +52,8 @@ oe_multilib_header() {
 oe_multilib_header_class-native () {
 	return
 }
+
+# Nor do we need multilib headers for nativesdk builds.
+oe_multilib_header_class-nativesdk () {
+	return
+}

meta/classes/native.bbclass

@@ -87,8 +87,7 @@ datadir = "${STAGING_DATADIR_NATIVE}"
 
 baselib = "lib"
 
-# Libtool's default paths are correct for the native machine
-lt_cv_sys_lib_dlsearch_path_spec[unexport] = "1"
+export lt_cv_sys_lib_dlsearch_path_spec = "${libdir} ${base_libdir} /lib /lib64 /usr/lib /usr/lib64"
 
 NATIVE_PACKAGE_PATH_SUFFIX ?= ""
 bindir .= "${NATIVE_PACKAGE_PATH_SUFFIX}"

meta/classes/npm.bbclass

@@ -1,4 +1,5 @@
 DEPENDS_prepend = "nodejs-native "
+RDEPENDS_${PN}_prepend = "nodejs "
 S = "${WORKDIR}/npmpkg"
 
 NPM_INSTALLDIR = "${D}${libdir}/node_modules/${PN}"

meta/classes/package.bbclass

@@ -146,7 +146,7 @@ def do_split_packages(d, root, file_regex, output_pattern, description, postinst
 
 
     packages = d.getVar('PACKAGES', True).split()
-    split_packages = []
+    split_packages = set()
 
     if postinst:
         postinst = '#!/bin/sh\n' + postinst + '\n'
@@ -183,7 +183,7 @@ def do_split_packages(d, root, file_regex, output_pattern, description, postinst
             continue
         on = legitimize_package_name(m.group(1))
         pkg = output_pattern % on
-        split_packages.append(pkg)
+        split_packages.add(pkg)
         if not pkg in packages:
             if prepend:
                 packages = [pkg] + packages
@@ -226,7 +226,7 @@ def do_split_packages(d, root, file_regex, output_pattern, description, postinst
             hook(f, pkg, file_regex, output_pattern, m.group(1))
 
     d.setVar('PACKAGES', ' '.join(packages))
-    return split_packages
+    return list(split_packages)
 
 PACKAGE_DEPENDS += "file-native"
 

meta/classes/package_ipk.bbclass

@@ -45,6 +45,8 @@ python do_package_ipk () {
             if os.path.exists(p):
                 bb.utils.prunedir(p)
 
+    recipesource = os.path.basename(d.getVar('FILE', True))
+
     for pkg in packages.split():
         localdata = bb.data.createCopy(d)
         root = "%s/%s" % (pkgdest, pkg)
@@ -208,10 +210,7 @@ python do_package_ipk () {
             ctrlfile.write("Replaces: %s\n" % bb.utils.join_deps(rreplaces))
         if rconflicts:
             ctrlfile.write("Conflicts: %s\n" % bb.utils.join_deps(rconflicts))
-        src_uri = localdata.getVar("SRC_URI", True).strip() or "None"
-        if src_uri:
-            src_uri = re.sub("\s+", " ", src_uri)
-            ctrlfile.write("Source: %s\n" % " ".join(src_uri.split()))
+        ctrlfile.write("Source: %s\n" % recipesource)
         ctrlfile.close()
 
         for script in ["preinst", "postinst", "prerm", "postrm"]:

meta/classes/populate_sdk_ext.bbclass

@@ -221,10 +221,16 @@ python copy_buildsystem () {
 
             # Error if the sigs in the locked-signature file don't match
             # the sig computed from the metadata.
-            f.write('SIGGEN_LOCKEDSIGS_TASKSIG_CHECK = "error"\n\n')
+            f.write('SIGGEN_LOCKEDSIGS_TASKSIG_CHECK = "warn"\n\n')
+
+            # Set up whitelist for run on install
+            f.write('BB_SETSCENE_ENFORCE_WHITELIST = "%:* *:do_shared_workdir *:do_rm_work *:do_package"\n\n')
 
             # Hide the config information from bitbake output (since it's fixed within the SDK)
-            f.write('BUILDCFG_HEADER = ""\n')
+            f.write('BUILDCFG_HEADER = ""\n\n')
+
+            # Map gcc-dependent uninative sstate cache for installer usage
+            f.write('SSTATE_MIRRORS = "file://universal/(.*) file://universal-4.9/\\1\\nfile://universal-4.9/(.*) file://universal-4.8/\\1"\n\n')
 
             # Allow additional config through sdk-extra.conf
             fn = bb.cookerdata.findConfigFile('sdk-extra.conf', d)
@@ -420,7 +426,7 @@ sdk_ext_postinst() {
 		# current working directory when first ran, nor will it set $1 when
 		# sourcing a script. That is why this has to look so ugly.
 		LOGFILE="$target_sdk_dir/preparing_build_system.log"
-		sh -c ". buildtools/environment-setup* > $LOGFILE && cd $target_sdk_dir/`dirname ${oe_init_build_env_path}` && set $target_sdk_dir && . $target_sdk_dir/${oe_init_build_env_path} $target_sdk_dir >> $LOGFILE && python $target_sdk_dir/ext-sdk-prepare.py '${SDK_INSTALL_TARGETS}' >> $LOGFILE 2>&1" || { echo "ERROR: SDK preparation failed: see $LOGFILE"; echo "printf 'ERROR: this SDK was not fully installed and needs reinstalling\n'" >> $env_setup_script ; exit 1 ; }
+		sh -c ". buildtools/environment-setup* > $LOGFILE && cd $target_sdk_dir/`dirname ${oe_init_build_env_path}` && set $target_sdk_dir && . $target_sdk_dir/${oe_init_build_env_path} $target_sdk_dir >> $LOGFILE && python $target_sdk_dir/ext-sdk-prepare.py '${SDK_INSTALL_TARGETS}' >> $LOGFILE 2>&1" || { echo "ERROR: SDK preparation failed: see $LOGFILE"; cat "$LOGFILE"; echo "printf 'ERROR: this SDK was not fully installed and needs reinstalling\n'" >> $env_setup_script ; exit 1 ; }
 		rm $target_sdk_dir/ext-sdk-prepare.py
 	fi
 	echo done

meta/classes/rm_work.bbclass

@@ -55,7 +55,7 @@ do_rm_work () {
             *do_setscene*)
                 break
                 ;;
-            *sigdata*)
+            *sigdata*|*sigbasedata*)
                 i=dummy
                 break
                 ;;

meta/classes/rootfs-postcommands.bbclass

@@ -21,7 +21,7 @@ ROOTFS_POSTUNINSTALL_COMMAND =+ "write_image_manifest ; "
 POSTINST_LOGFILE ?= "${localstatedir}/log/postinstall.log"
 # Set default target for systemd images
 SYSTEMD_DEFAULT_TARGET ?= '${@bb.utils.contains("IMAGE_FEATURES", "x11-base", "graphical.target", "multi-user.target", d)}'
-ROOTFS_POSTPROCESS_COMMAND += '${@bb.utils.contains("DISTRO_FEATURES", "systemd", "set_systemd_default_target; ", "", d)}'
+ROOTFS_POSTPROCESS_COMMAND += '${@bb.utils.contains("DISTRO_FEATURES", "systemd", "set_systemd_default_target; systemd_create_users;", "", d)}'
 
 ROOTFS_POSTPROCESS_COMMAND += 'empty_var_volatile;'
 
@@ -30,7 +30,25 @@ ROOTFS_POSTPROCESS_COMMAND += 'empty_var_volatile;'
 SSH_DISABLE_DNS_LOOKUP ?= " ssh_disable_dns_lookup ; "
 ROOTFS_POSTPROCESS_COMMAND_append_qemuall = "${SSH_DISABLE_DNS_LOOKUP}"
 
-
+systemd_create_users () {
+	for conffile in ${IMAGE_ROOTFS}/usr/lib/sysusers.d/systemd.conf ${IMAGE_ROOTFS}/usr/lib/sysusers.d/systemd-remote.conf; do
+		[ -e $conffile ] || continue
+		grep -v "^#" $conffile | sed -e '/^$/d' | while read type name id comment; do
+		if [ "$type" = "u" ]; then
+			useradd_params="--shell /sbin/nologin"
+			[ "$id" != "-" ] && useradd_params="$useradd_params --uid $id"
+			[ "$comment" != "-" ] && useradd_params="$useradd_params --comment $comment"
+			useradd_params="$useradd_params --system $name"
+			eval useradd --root ${IMAGE_ROOTFS} $useradd_params || true
+		elif [ "$type" = "g" ]; then
+			groupadd_params=""
+			[ "$id" != "-" ] && groupadd_params="$groupadd_params --gid $id"
+			groupadd_params="$groupadd_params --system $name"
+			eval groupadd --root ${IMAGE_ROOTFS} $groupadd_params || true
+		fi
+		done
+	done
+}
 
 #
 # A hook function to support read-only-rootfs IMAGE_FEATURES
@@ -73,27 +91,6 @@ read_only_rootfs_hook () {
 			${IMAGE_ROOTFS}/etc/init.d/populate-volatile.sh
 		fi
 	fi
-
-	if ${@bb.utils.contains("DISTRO_FEATURES", "systemd", "true", "false", d)}; then
-	    # Update user database files so that services don't fail for a read-only systemd system
-	    for conffile in ${IMAGE_ROOTFS}/usr/lib/sysusers.d/systemd.conf ${IMAGE_ROOTFS}/usr/lib/sysusers.d/systemd-remote.conf; do
-		[ -e $conffile ] || continue
-		grep -v "^#" $conffile | sed -e '/^$/d' | while read type name id comment; do
-		    if [ "$type" = "u" ]; then
-			useradd_params=""
-			[ "$id" != "-" ] && useradd_params="$useradd_params --uid $id"
-			[ "$comment" != "-" ] && useradd_params="$useradd_params --comment $comment"
-			useradd_params="$useradd_params --system $name"
-			eval useradd --root ${IMAGE_ROOTFS} $useradd_params || true
-		    elif [ "$type" = "g" ]; then
-			groupadd_params=""
-			[ "$id" != "-" ] && groupadd_params="$groupadd_params --gid $id"
-			groupadd_params="$groupadd_params --system $name"
-			eval groupadd --root ${IMAGE_ROOTFS} $groupadd_params || true
-		    fi
-		done
-	    done
-	fi
 }
 
 #

meta/classes/rootfs_rpm.bbclass

@@ -5,8 +5,8 @@
 ROOTFS_PKGMANAGE = "rpm smartpm"
 ROOTFS_PKGMANAGE_BOOTSTRAP = "run-postinsts"
 
-# Add 50Meg of extra space for Smart
-IMAGE_ROOTFS_EXTRA_SPACE_append = "${@bb.utils.contains("PACKAGE_INSTALL", "smartpm", " + 51200", "" ,d)}"
+# Add 100Meg of extra space for Smart
+IMAGE_ROOTFS_EXTRA_SPACE_append = "${@bb.utils.contains("PACKAGE_INSTALL", "smartpm", " + 102400", "" ,d)}"
 
 # Smart is python based, so be sure python-native is available to us.
 EXTRANATIVEPATH += "python-native"

meta/classes/sstate.bbclass

@@ -442,7 +442,7 @@ def sstate_clean(ss, d):
     rm_nohash = ".do_%s" % ss['task']
     for stfile in glob.glob(wildcard_stfile):
         # Keep the sigdata
-        if ".sigdata." in stfile:
+        if ".sigdata." in stfile or ".sigbasedata." in stfile:
             continue
         # Preserve taint files in the stamps directory
         if stfile.endswith('.taint'):

meta/classes/syslinux.bbclass

@@ -30,6 +30,7 @@ SYSLINUX_SERIAL_TTY ?= "console=ttyS0,115200"
 SYSLINUX_PROMPT ?= "0"
 SYSLINUX_TIMEOUT ?= "50"
 AUTO_SYSLINUXMENU ?= "1"
+SYSLINUX_ALLOWOPTIONS ?= "1"
 SYSLINUX_ROOT ?= "${ROOT}"
 SYSLINUX_CFG_VM  ?= "${S}/syslinux_vm.cfg"
 SYSLINUX_CFG_LIVE ?= "${S}/syslinux_live.cfg"
@@ -104,7 +105,7 @@ python build_syslinux_cfg () {
     try:
         cfgfile = file(cfile, 'w')
     except OSError:
-        raise bb.build.funcFailed('Unable to open %s' % (cfile))
+        raise bb.build.FuncFailed('Unable to open %s' % (cfile))
 
     cfgfile.write('# Automatically created by OE\n')
 
@@ -114,7 +115,12 @@ python build_syslinux_cfg () {
         for opt in opts.split(';'):
             cfgfile.write('%s\n' % opt)
 
-    cfgfile.write('ALLOWOPTIONS 1\n');
+    allowoptions = d.getVar('SYSLINUX_ALLOWOPTIONS', True)
+    if allowoptions:
+        cfgfile.write('ALLOWOPTIONS %s\n' % allowoptions)
+    else:
+        cfgfile.write('ALLOWOPTIONS 1\n')
+
     syslinux_default_console = d.getVar('SYSLINUX_DEFAULT_CONSOLE', True)
     syslinux_serial_tty = d.getVar('SYSLINUX_SERIAL_TTY', True)
     syslinux_serial = d.getVar('SYSLINUX_SERIAL', True)

meta/classes/toolchain-scripts.bbclass

@@ -6,6 +6,9 @@ REAL_MULTIMACH_TARGET_SYS ?= "${MULTIMACH_TARGET_SYS}"
 TARGET_CC_ARCH_append_libc-uclibc = " -muclibc"
 TARGET_CC_ARCH_append_libc-musl = " -mmusl"
 
+# default debug prefix map isn't valid in the SDK
+DEBUG_PREFIX_MAP = ""
+
 # This function creates an environment-setup-script for use in a deployable SDK
 toolchain_create_sdk_env_script () {
 	# Create environment setup script
@@ -89,12 +92,12 @@ toolchain_shared_env_script () {
 # Append environment subscripts
 if [ -d "\$OECORE_TARGET_SYSROOT/environment-setup.d" ]; then
     for envfile in \$OECORE_TARGET_SYSROOT/environment-setup.d/*.sh; do
-	    source \$envfile
+	    . \$envfile
     done
 fi
 if [ -d "\$OECORE_NATIVE_SYSROOT/environment-setup.d" ]; then
     for envfile in \$OECORE_NATIVE_SYSROOT/environment-setup.d/*.sh; do
-	    source \$envfile
+	    . \$envfile
     done
 fi
 EOF

meta/classes/update-alternatives.bbclass

@@ -71,14 +71,14 @@ def gen_updatealternativesvardeps(d):
 
     # First compute them for non_pkg versions
     for v in vars:
-        for flag in (d.getVarFlags(v) or {}):
+        for flag in sorted((d.getVarFlags(v) or {}).keys()):
             if flag == "doc" or flag == "vardeps" or flag == "vardepsexp":
                 continue
             d.appendVar('%s_VARDEPS' % (v), ' %s:%s' % (flag, d.getVarFlag(v, flag, False)))
 
     for p in pkgs:
         for v in vars:
-            for flag in (d.getVarFlags("%s_%s" % (v,p)) or {}):
+            for flag in sorted((d.getVarFlags("%s_%s" % (v,p)) or {}).keys()):
                 if flag == "doc" or flag == "vardeps" or flag == "vardepsexp":
                     continue
                 d.appendVar('%s_VARDEPS_%s' % (v,p), ' %s:%s' % (flag, d.getVarFlag('%s_%s' % (v,p), flag, False)))

meta/classes/useradd-staticids.bbclass

@@ -46,6 +46,14 @@ def update_useradd_static_config(d):
 
         return id_table
 
+    def handle_missing_id(id, type, pkg):
+        # For backwards compatibility we accept "1" in addition to "error"
+        if d.getVar('USERADD_ERROR_DYNAMIC', True) == 'error' or d.getVar('USERADD_ERROR_DYNAMIC', True) == '1':
+            #bb.error("Skipping recipe %s, package %s which adds %sname %s does not have a static ID defined." % (d.getVar('PN', True),  pkg, type, id))
+            raise bb.build.FuncFailed("%s - %s: %sname %s does not have a static ID defined." % (d.getVar('PN', True), pkg, type, id))
+        elif d.getVar('USERADD_ERROR_DYNAMIC', True) == 'warn':
+            bb.warn("%s - %s: %sname %s does not have a static ID defined." % (d.getVar('PN', True), pkg, type, id))
+
     # We parse and rewrite the useradd components
     def rewrite_useradd(params):
         # The following comes from --help on useradd from shadow
@@ -112,6 +120,8 @@ def update_useradd_static_config(d):
                 users = merge_files(get_passwd_list(d), 7)
 
             if uaargs.LOGIN not in users:
+                if not uaargs.uid or not uaargs.uid.isdigit() or not uaargs.gid:
+                    handle_missing_id(uaargs.LOGIN, 'user', pkg)
                 continue
 
             field = users[uaargs.LOGIN]
@@ -161,9 +171,8 @@ def update_useradd_static_config(d):
             uaargs.shell = field[6] or uaargs.shell
 
             # Should be an error if a specific option is set...
-            if d.getVar('USERADD_ERROR_DYNAMIC', True) == '1' and not ((uaargs.uid and uaargs.uid.isdigit()) and uaargs.gid):
-                #bb.error("Skipping recipe %s, package %s which adds username %s does not have a static uid defined." % (d.getVar('PN', True),  pkg, uaargs.LOGIN))
-                raise bb.build.FuncFailed("%s - %s: Username %s does not have a static uid defined." % (d.getVar('PN', True), pkg, uaargs.LOGIN))
+            if not uaargs.uid or not uaargs.uid.isdigit() or not uaargs.gid:
+                 handle_missing_id(uaargs.LOGIN, 'user', pkg)
 
             # Reconstruct the args...
             newparam  = ['', ' --defaults'][uaargs.defaults]
@@ -244,6 +253,8 @@ def update_useradd_static_config(d):
                 groups = merge_files(get_group_list(d), 4)
 
             if gaargs.GROUP not in groups:
+                if not gaargs.gid or not gaargs.gid.isdigit():
+                    handle_missing_id(gaargs.GROUP, 'group', pkg)
                 continue
 
             field = groups[gaargs.GROUP]
@@ -253,9 +264,8 @@ def update_useradd_static_config(d):
                     bb.warn("%s: Changing groupname %s's gid from (%s) to (%s), verify configuration files!" % (d.getVar('PN', True), gaargs.GROUP, gaargs.gid, field[2]))
                 gaargs.gid = field[2]
 
-            if d.getVar('USERADD_ERROR_DYNAMIC', True) == '1' and not (gaargs.gid and gaargs.gid.isdigit()):
-                #bb.error("Skipping recipe %s, package %s which adds groupname %s does not have a static gid defined." % (d.getVar('PN', True),  pkg, gaargs.GROUP))
-                raise bb.build.FuncFailed("%s - %s: Groupname %s does not have a static gid defined." % (d.getVar('PN', True), pkg, gaargs.GROUP))
+            if not gaargs.gid or not gaargs.gid.isdigit():
+                handle_missing_id(gaargs.GROUP, 'group', pkg)
 
             # Reconstruct the args...
             newparam  = ['', ' --force'][gaargs.force]

meta/classes/useradd.bbclass

@@ -54,15 +54,15 @@ if test "x`echo $GROUPADD_PARAM | tr -d '[:space:]'`" != "x"; then
 	echo "Running groupadd commands..."
 	# Invoke multiple instances of groupadd for parameter lists
 	# separated by ';'
-	opts=`echo "$GROUPADD_PARAM" | cut -d ';' -f 1`
-	remaining=`echo "$GROUPADD_PARAM" | cut -d ';' -f 2-`
+	opts=`echo "$GROUPADD_PARAM" | cut -d ';' -f 1 | sed -e 's#[ \t]*$##'`
+	remaining=`echo "$GROUPADD_PARAM" | cut -d ';' -f 2- | sed -e 's#[ \t]*$##'`
 	while test "x$opts" != "x"; do
 		perform_groupadd "$SYSROOT" "$OPT $opts"
 		if test "x$opts" = "x$remaining"; then
 			break
 		fi
-		opts=`echo "$remaining" | cut -d ';' -f 1`
-		remaining=`echo "$remaining" | cut -d ';' -f 2-`
+		opts=`echo "$remaining" | cut -d ';' -f 1 | sed -e 's#[ \t]*$##'`
+		remaining=`echo "$remaining" | cut -d ';' -f 2- | sed -e 's#[ \t]*$##'`
 	done
 fi 
 
@@ -70,15 +70,15 @@ if test "x`echo $USERADD_PARAM | tr -d '[:space:]'`" != "x"; then
 	echo "Running useradd commands..."
 	# Invoke multiple instances of useradd for parameter lists
 	# separated by ';'
-	opts=`echo "$USERADD_PARAM" | cut -d ';' -f 1`
-	remaining=`echo "$USERADD_PARAM" | cut -d ';' -f 2-`
+	opts=`echo "$USERADD_PARAM" | cut -d ';' -f 1 | sed -e 's#[ \t]*$##'`
+	remaining=`echo "$USERADD_PARAM" | cut -d ';' -f 2- | sed -e 's#[ \t]*$##'`
 	while test "x$opts" != "x"; do
 		perform_useradd "$SYSROOT" "$OPT $opts"
 		if test "x$opts" = "x$remaining"; then
 			break
 		fi
-		opts=`echo "$remaining" | cut -d ';' -f 1`
-		remaining=`echo "$remaining" | cut -d ';' -f 2-`
+		opts=`echo "$remaining" | cut -d ';' -f 1 | sed -e 's#[ \t]*$##'`
+		remaining=`echo "$remaining" | cut -d ';' -f 2- | sed -e 's#[ \t]*$##'`
 	done
 fi
 
@@ -86,15 +86,15 @@ if test "x`echo $GROUPMEMS_PARAM | tr -d '[:space:]'`" != "x"; then
 	echo "Running groupmems commands..."
 	# Invoke multiple instances of groupmems for parameter lists
 	# separated by ';'
-	opts=`echo "$GROUPMEMS_PARAM" | cut -d ';' -f 1`
-	remaining=`echo "$GROUPMEMS_PARAM" | cut -d ';' -f 2-`
+	opts=`echo "$GROUPMEMS_PARAM" | cut -d ';' -f 1 | sed -e 's#[ \t]*$##'`
+	remaining=`echo "$GROUPMEMS_PARAM" | cut -d ';' -f 2- | sed -e 's#[ \t]*$##'`
 	while test "x$opts" != "x"; do
 		perform_groupmems "$SYSROOT" "$OPT $opts"
 		if test "x$opts" = "x$remaining"; then
 			break
 		fi
-		opts=`echo "$remaining" | cut -d ';' -f 1`
-		remaining=`echo "$remaining" | cut -d ';' -f 2-`
+		opts=`echo "$remaining" | cut -d ';' -f 1 | sed -e 's#[ \t]*$##'`
+		remaining=`echo "$remaining" | cut -d ';' -f 2- | sed -e 's#[ \t]*$##'`
 	done
 fi
 }
@@ -103,7 +103,7 @@ useradd_sysroot () {
 	# Pseudo may (do_install) or may not (do_populate_sysroot_setscene) be running 
 	# at this point so we're explicit about the environment so pseudo can load if 
 	# not already present.
-	export PSEUDO="${FAKEROOTENV} PSEUDO_LOCALSTATEDIR=${STAGING_DIR_TARGET}${localstatedir}/pseudo ${STAGING_DIR_NATIVE}${bindir}/pseudo"
+	export PSEUDO="${FAKEROOTENV} PSEUDO_LOCALSTATEDIR=${STAGING_DIR_TARGET}${localstatedir}/pseudo ${STAGING_DIR_NATIVE}${bindir_native}/pseudo"
 
 	# Explicitly set $D since it isn't set to anything
 	# before do_install
@@ -130,7 +130,7 @@ useradd_sysroot_sstate () {
 userdel_sysroot_sstate () {
 if test "x${STAGING_DIR_TARGET}" != "x"; then
     if [ "${BB_CURRENTTASK}" = "configure" -o "${BB_CURRENTTASK}" = "clean" ]; then
-        export PSEUDO="${FAKEROOTENV} PSEUDO_LOCALSTATEDIR=${STAGING_DIR_TARGET}${localstatedir}/pseudo ${STAGING_DIR_NATIVE}${bindir}/pseudo"
+        export PSEUDO="${FAKEROOTENV} PSEUDO_LOCALSTATEDIR=${STAGING_DIR_TARGET}${localstatedir}/pseudo ${STAGING_DIR_NATIVE}${bindir_native}/pseudo"
         OPT="--root ${STAGING_DIR_TARGET}"
 
         # Remove groups and users defined for package
@@ -203,7 +203,7 @@ def get_all_cmd_params(d, cmd_type):
     for pkg in useradd_packages.split():
         param = d.getVar(param_type % pkg, True)
         if param:
-            params.append(param)
+            params.append(param.rstrip(" ;"))
 
     return "; ".join(params)
 

meta/classes/useradd_base.bbclass

@@ -17,7 +17,6 @@ perform_groupadd () {
 	local groupname=`echo "$opts" | awk '{ print $NF }'`
 	local group_exists="`grep "^$groupname:" $rootdir/etc/group || true`"
 	if test "x$group_exists" = "x"; then
-		opts=`echo $opts | sed s/\'/\"/g`
 		eval flock -x $rootdir${sysconfdir} -c \"$PSEUDO groupadd \$opts\" || true
 		group_exists="`grep "^$groupname:" $rootdir/etc/group || true`"
 		if test "x$group_exists" = "x"; then
@@ -35,7 +34,6 @@ perform_useradd () {
 	local username=`echo "$opts" | awk '{ print $NF }'`
 	local user_exists="`grep "^$username:" $rootdir/etc/passwd || true`"
 	if test "x$user_exists" = "x"; then
-		opts=`echo $opts | sed s/\'/\"/g`
 		eval flock -x $rootdir${sysconfdir} -c  \"$PSEUDO useradd \$opts\" || true
 		user_exists="`grep "^$username:" $rootdir/etc/passwd || true`"
 		if test "x$user_exists" = "x"; then

meta/conf/bitbake.conf

@@ -444,10 +444,10 @@ CCACHE ??= ""
 # Disable ccache explicitly if CCACHE is null since gcc may be a symlink
 # of ccache some distributions (e.g., Fedora 17).
 export CCACHE_DISABLE ??= "${@[0,1][d.getVar('CCACHE', True) == '']}"
-# Assign CCACHE_DIR a default value to fix a bug of ccache 3.1.7,
-# since it would always create CCACHE_DIR/.ccache even if
-# CCACHE_DISABLE = 1.
-export CCACHE_DIR ??= "${@os.getenv('HOME')}"
+# ccache < 3.1.10 will create CCACHE_DIR on startup even if disabled, and
+# autogen sets HOME=/dev/null so in certain situations builds can fail.
+# Explicitly export CCACHE_DIR until we can assume ccache >3.1.10 on the host.
+export CCACHE_DIR ??= "${@os.getenv('HOME')}/.ccache"
 
 TOOLCHAIN_OPTIONS = " --sysroot=${STAGING_DIR_TARGET}"
 
@@ -465,6 +465,7 @@ export OBJCOPY = "${HOST_PREFIX}objcopy"
 export OBJDUMP = "${HOST_PREFIX}objdump"
 export STRINGS = "${HOST_PREFIX}strings"
 export NM = "${HOST_PREFIX}nm"
+export READELF = "${HOST_PREFIX}readelf"
 PYTHON = "${@sys.executable}"
 
 export BUILD_CC = "${CCACHE}${BUILD_PREFIX}gcc ${BUILD_CC_ARCH}"
@@ -549,11 +550,11 @@ EXTRA_OEMAKE_prepend_task-install = "${PARALLEL_MAKEINST} "
 ##################################################################
 # Optimization flags.
 ##################################################################
-DEBUG_FLAGS ?= "-g -feliminate-unused-debug-types \
-                -fdebug-prefix-map=${WORKDIR}=/usr/src/debug/${PN}/${EXTENDPE}${PV}-${PR} \
-                -fdebug-prefix-map=${STAGING_DIR_NATIVE}= \
-                -fdebug-prefix-map=${STAGING_DIR_HOST}= \
+DEBUG_PREFIX_MAP ?= "-fdebug-prefix-map=${WORKDIR}=/usr/src/debug/${PN}/${EXTENDPE}${PV}-${PR} \
+                     -fdebug-prefix-map=${STAGING_DIR_NATIVE}= \
+                     -fdebug-prefix-map=${STAGING_DIR_HOST}= \
 "
+DEBUG_FLAGS ?= "-g -feliminate-unused-debug-types ${DEBUG_PREFIX_MAP}"
 
 # Disabled until the option works properly -feliminate-dwarf2-dups
 FULL_OPTIMIZATION = "-O2 -pipe ${DEBUG_FLAGS}"
@@ -572,7 +573,7 @@ BBLAYERS_FETCH_DIR ??= "${COREBASE}"
 # Download locations and utilities.
 ##################################################################
 
-APACHE_MIRROR = "http://www.eu.apache.org/dist/"
+APACHE_MIRROR = "http://archive.apache.org/dist"
 DEBIAN_MIRROR = "ftp://ftp.debian.org/debian/pool"
 GENTOO_MIRROR = "http://distfiles.gentoo.org/distfiles"
 GNOME_GIT = "git://git.gnome.org"
@@ -713,6 +714,7 @@ require conf/sanity.conf
 DL_DIR ?= "${TOPDIR}/downloads"
 SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
 IMAGE_FSTYPES ?= "tar.gz"
+IMAGE_FSTYPES_DEBUGFS ?= "${IMAGE_FSTYPES}"
 
 INITRAMFS_FSTYPES ?= "cpio.gz"
 # The maximum size in Kbytes for the generated initramfs image size.

meta/conf/distro/include/yocto-uninative.inc

@@ -6,6 +6,6 @@
 # to the distro running on the build machine.
 #
 
-UNINATIVE_URL = "http://downloads.yoctoproject.org/releases/uninative/0.95/"
-UNINATIVE_CHECKSUM[i686] ?= "5f27d7e0f4dd2ed80a7ff6a0d88af107b08e00765b31ed3aa180cc5ce15b0811"
-UNINATIVE_CHECKSUM[x86_64] ?= "26d46c61ad88cc245e31c88549717c0092a838d111b93ec169d88b08cc027581"
+UNINATIVE_URL = "http://downloads.yoctoproject.org/releases/uninative/1.0.1/"
+UNINATIVE_CHECKSUM[i686] ?= "de51bc9162b07694d3462352ab25f636a6b50235438c1b09440d7569e009123b"
+UNINATIVE_CHECKSUM[x86_64] ?= "acf1e44a0ac2e855e81da6426197d36358bf7b4e88e552ef933128498c8910f8"

meta/conf/documentation.conf

@@ -451,8 +451,12 @@ UBOOT_SUFFIX[doc] = "Points to the generated U-Boot extension."
 UBOOT_TARGET[doc] = "Specifies the target used for building U-Boot."
 USE_DEVFS[doc] = "When building images, specifies to populate or not /dev. This variable defaults to '1' (leave directory empty, surely because devtmpfs do the job). Set it to '0' to use makedevs (or consider using a custom file with IMAGE_DEVICE_TABLES)."
 USER_CLASSES[doc] = "List of additional classes to use when building images that enable extra features."
+USERADD_ERROR_DYNAMIC[doc] = "If set to 'error', forces the OpenEmbedded build system to produce an error if the user identification (uid) and group identification (gid) values are not defined in any of the files listed in USERADD_UID_TABLES and USERADD_GID_TABLES. If set to 'warn', a warning will be issued instead."
+USERADD_GID_TABLES[doc] = "Specifies a password file to use for obtaining static group identification (gid) values when the OpenEmbedded build system adds a group to the system during package installation."
 USERADD_PACKAGES[doc] = "When a recipe inherits the useradd class, this variable specifies the individual packages within the recipe that require users and/or groups to be added."
 USERADD_PARAM[doc] = "When a recipe inherits the useradd class, this variable specifies for a package what parameters should be passed to the useradd command if you wish to add a user to the system when the package is installed."
+USERADD_UID_TABLES[doc] = "Specifies a password file to use for obtaining static user identification (uid) values when the OpenEmbedded build system adds a user to the system during package installation."
+USERADDEXTENSION[doc] = "When set to 'useradd-staticids', causes the OpenEmbedded build system to base all user and group additions on files listed in USERADD_UID_TABLES and USERADD_GID_TABLES."
 
 #W
 

meta/conf/machine/include/arm/arch-armv7ve.inc

@@ -5,8 +5,7 @@ TUNECONFLICTS[armv7ve] = "armv4 armv5 armv6 armv7 armv7a"
 TUNE_CCARGS .= "${@bb.utils.contains('TUNE_FEATURES', 'armv7ve', ' -march=armv7ve', '', d)}"
 MACHINEOVERRIDES =. "${@bb.utils.contains('TUNE_FEATURES', 'armv7ve', 'armv7ve:', '' ,d)}"
 
-require conf/machine/include/arm/arch-armv6.inc
-require conf/machine/include/arm/feature-arm-neon.inc
+require conf/machine/include/arm/arch-armv7a.inc
 
 # Little Endian base configs
 AVAILTUNES += "armv7ve armv7vet armv7ve-vfpv3d16 armv7vet-vfpv3d16 armv7ve-vfpv3 armv7vet-vfpv3 armv7ve-neon armv7vet-neon armv7ve-neon-vfpv4 armv7vet-neon-vfpv4"
@@ -30,8 +29,8 @@ TUNE_FEATURES_tune-armv7ve-neon        = "${TUNE_FEATURES_tune-armv7ve}  neon"
 TUNE_FEATURES_tune-armv7vet-neon       = "${TUNE_FEATURES_tune-armv7vet} neon"
 TUNE_FEATURES_tune-armv7ve-neon-vfpv4  = "${TUNE_FEATURES_tune-armv7ve-neon}  vfpv4"
 TUNE_FEATURES_tune-armv7vet-neon-vfpv4 = "${TUNE_FEATURES_tune-armv7vet-neon} vfpv4"
-PACKAGE_EXTRA_ARCHS_tune-armv7ve             = "${PACKAGE_EXTRA_ARCHS_tune-armv6}  armv7ve armv7ve-vfp"
-PACKAGE_EXTRA_ARCHS_tune-armv7vet            = "${PACKAGE_EXTRA_ARCHS_tune-armv6t} armv7ve armv7ve-vfp armv7vet2-vfp"
+PACKAGE_EXTRA_ARCHS_tune-armv7ve             = "${PACKAGE_EXTRA_ARCHS_tune-armv7a}  armv7ve armv7ve-vfp"
+PACKAGE_EXTRA_ARCHS_tune-armv7vet            = "${PACKAGE_EXTRA_ARCHS_tune-armv7at} armv7ve armv7ve-vfp armv7vet2-vfp"
 PACKAGE_EXTRA_ARCHS_tune-armv7ve-vfpv3d16    = "${PACKAGE_EXTRA_ARCHS_tune-armv7ve}  armv7ve-vfpv3d16"
 PACKAGE_EXTRA_ARCHS_tune-armv7vet-vfpv3d16   = "${PACKAGE_EXTRA_ARCHS_tune-armv7vet} armv7ve-vfpv3d16 armv7vet2-vfpv3d16"
 PACKAGE_EXTRA_ARCHS_tune-armv7ve-vfpv3       = "${PACKAGE_EXTRA_ARCHS_tune-armv7ve-vfpv3d16}  armv7ve-vfpv3"
@@ -63,8 +62,8 @@ TUNE_FEATURES_tune-armv7vehf-neon        = "${TUNE_FEATURES_tune-armv7ve-neon}
 TUNE_FEATURES_tune-armv7vethf-neon       = "${TUNE_FEATURES_tune-armv7vet-neon}       callconvention-hard"
 TUNE_FEATURES_tune-armv7vehf-neon-vfpv4  = "${TUNE_FEATURES_tune-armv7ve-neon-vfpv4}  callconvention-hard"
 TUNE_FEATURES_tune-armv7vethf-neon-vfpv4 = "${TUNE_FEATURES_tune-armv7vet-neon-vfpv4} callconvention-hard"
-PACKAGE_EXTRA_ARCHS_tune-armv7vehf             = "${PACKAGE_EXTRA_ARCHS_tune-armv6hf}  armv7vehf-vfp"
-PACKAGE_EXTRA_ARCHS_tune-armv7vethf            = "${PACKAGE_EXTRA_ARCHS_tune-armv6thf} armv7vehf-vfp armv7vet2hf-vfp"
+PACKAGE_EXTRA_ARCHS_tune-armv7vehf             = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf}  armv7vehf-vfp"
+PACKAGE_EXTRA_ARCHS_tune-armv7vethf            = "${PACKAGE_EXTRA_ARCHS_tune-armv7athf} armv7vehf-vfp armv7vet2hf-vfp"
 PACKAGE_EXTRA_ARCHS_tune-armv7vehf-vfpv3d16    = "${PACKAGE_EXTRA_ARCHS_tune-armv7vehf}  armv7vehf-vfpv3d16"
 PACKAGE_EXTRA_ARCHS_tune-armv7vethf-vfpv3d16   = "${PACKAGE_EXTRA_ARCHS_tune-armv7vethf} armv7vehf-vfpv3d16 armv7vet2hf-vfpv3d16"
 PACKAGE_EXTRA_ARCHS_tune-armv7vehf-vfpv3       = "${PACKAGE_EXTRA_ARCHS_tune-armv7vehf-vfpv3d16}  armv7vehf-vfpv3"
@@ -96,8 +95,8 @@ TUNE_FEATURES_tune-armv7veb-neon        = "${TUNE_FEATURES_tune-armv7ve-neon}
 TUNE_FEATURES_tune-armv7vetb-neon       = "${TUNE_FEATURES_tune-armv7vet-neon}       bigendian"
 TUNE_FEATURES_tune-armv7veb-neon-vfpv4  = "${TUNE_FEATURES_tune-armv7ve-neon-vfpv4}  bigendian"
 TUNE_FEATURES_tune-armv7vetb-neon-vfpv4 = "${TUNE_FEATURES_tune-armv7vet-neon-vfpv4} bigendian"
-PACKAGE_EXTRA_ARCHS_tune-armv7veb             = "${PACKAGE_EXTRA_ARCHS_tune-armv6b}  armv7veb-vfp"
-PACKAGE_EXTRA_ARCHS_tune-armv7vetb            = "${PACKAGE_EXTRA_ARCHS_tune-armv6tb} armv7veb-vfp armv7vet2b-vfp"
+PACKAGE_EXTRA_ARCHS_tune-armv7veb             = "${PACKAGE_EXTRA_ARCHS_tune-armv7ab}  armv7veb-vfp"
+PACKAGE_EXTRA_ARCHS_tune-armv7vetb            = "${PACKAGE_EXTRA_ARCHS_tune-armv7atb} armv7veb-vfp armv7vet2b-vfp"
 PACKAGE_EXTRA_ARCHS_tune-armv7veb-vfpv3d16    = "${PACKAGE_EXTRA_ARCHS_tune-armv7veb}  armv7veb-vfpv3d16"
 PACKAGE_EXTRA_ARCHS_tune-armv7vetb-vfpv3d16   = "${PACKAGE_EXTRA_ARCHS_tune-armv7vetb} armv7veb-vfpv3d16 armv7vet2b-vfpv3d16"
 PACKAGE_EXTRA_ARCHS_tune-armv7veb-vfpv3       = "${PACKAGE_EXTRA_ARCHS_tune-armv7veb-vfpv3d16}  armv7veb-vfpv3"
@@ -129,8 +128,8 @@ TUNE_FEATURES_tune-armv7vehfb-neon        = "${TUNE_FEATURES_tune-armv7vehf-neon
 TUNE_FEATURES_tune-armv7vethfb-neon       = "${TUNE_FEATURES_tune-armv7vethf-neon}       bigendian"
 TUNE_FEATURES_tune-armv7vehfb-neon-vfpv4  = "${TUNE_FEATURES_tune-armv7vehf-neon-vfpv4}  bigendian"
 TUNE_FEATURES_tune-armv7vethfb-neon-vfpv4 = "${TUNE_FEATURES_tune-armv7vethf-neon-vfpv4} bigendian"
-PACKAGE_EXTRA_ARCHS_tune-armv7vehfb             = "${PACKAGE_EXTRA_ARCHS_tune-armv6hfb}  armv7vehfb-vfp"
-PACKAGE_EXTRA_ARCHS_tune-armv7vethfb            = "${PACKAGE_EXTRA_ARCHS_tune-armv6thfb} armv7vehfb-vfp armv7vet2hfb-vfp"
+PACKAGE_EXTRA_ARCHS_tune-armv7vehfb             = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahfb}  armv7vehfb-vfp"
+PACKAGE_EXTRA_ARCHS_tune-armv7vethfb            = "${PACKAGE_EXTRA_ARCHS_tune-armv7athfb} armv7vehfb-vfp armv7vet2hfb-vfp"
 PACKAGE_EXTRA_ARCHS_tune-armv7vehfb-vfpv3d16    = "${PACKAGE_EXTRA_ARCHS_tune-armv7vehfb}  armv7vehfb-vfpv3d16"
 PACKAGE_EXTRA_ARCHS_tune-armv7vethfb-vfpv3d16   = "${PACKAGE_EXTRA_ARCHS_tune-armv7vethfb} armv7vehfb-vfpv3d16 armv7vet2hfb-vfpv3d16"
 PACKAGE_EXTRA_ARCHS_tune-armv7vehfb-vfpv3       = "${PACKAGE_EXTRA_ARCHS_tune-armv7vehfb-vfpv3d16}  armv7vehfb-vfpv3"

meta/conf/machine/include/arm/feature-arm-neon.inc

@@ -8,7 +8,7 @@ TUNEVALID[neon] = "Enable Neon SIMD accelerator unit."
 TUNE_CCARGS_MFPU .= "${@bb.utils.contains('TUNE_FEATURES', 'neon', ' neon', '', d)}"
 
 TUNEVALID[vfpv3d16] = "Enable Vector Floating Point Version 3 with 16 registers (vfpv3-d16) unit."
-TUNE_CCARGS_MFPU .= "${@bb.utils.contains('TUNE_FEATURES', 'vfpv3d16', ' vfpv3d16', '', d)}"
+TUNE_CCARGS_MFPU .= "${@bb.utils.contains('TUNE_FEATURES', 'vfpv3d16', ' vfpv3-d16', '', d)}"
 
 TUNEVALID[vfpv3] = "Enable Vector Floating Point Version 3 with 32 registers (vfpv3) unit."
 TUNE_CCARGS_MFPU .= "${@bb.utils.contains('TUNE_FEATURES', 'vfpv3', ' vfpv3', '' , d)}"

meta/conf/machine/include/arm/feature-arm-vfp.inc

@@ -6,7 +6,7 @@ TUNEVALID[vfp] = "Enable Vector Floating Point (vfp) unit."
 TUNE_CCARGS_MFPU .= "${@bb.utils.contains('TUNE_FEATURES', 'vfp', ' vfp', '', d)}"
 
 TUNE_CCARGS  .= "${@ (' -mfpu=%s ' % d.getVar('TUNE_CCARGS_MFPU', True).split()[-1]) if (d.getVar('TUNE_CCARGS_MFPU', True) != '') else ''}"
-ARMPKGSFX_FPU = "${@ ('-%s'        % d.getVar('TUNE_CCARGS_MFPU', True).split()[-1]) if (d.getVar('TUNE_CCARGS_MFPU', True) != '') else ''}"
+ARMPKGSFX_FPU = "${@ ('-%s'        % d.getVar('TUNE_CCARGS_MFPU', True).split()[-1].replace('vfpv3-d16', 'vfpv3d16')) if (d.getVar('TUNE_CCARGS_MFPU', True) != '') else ''}"
 
 TUNEVALID[callconvention-hard] = "Enable EABI hard float call convention, requires VFP."
 TUNE_CCARGS_MFLOAT = "${@ bb.utils.contains('TUNE_FEATURES', 'callconvention-hard', 'hard', 'softfp', d) if (d.getVar('TUNE_CCARGS_MFPU', True) != '') else '' }"

meta/conf/machine/include/mips/arch-mips.inc

@@ -20,6 +20,9 @@ TUNECONFLICTS[n32] = "o32 n64"
 ABIEXTENSION .= "${@bb.utils.contains('TUNE_FEATURES', 'n32', 'n32', '' ,d)}"
 TUNE_CCARGS .= "${@bb.utils.contains('TUNE_FEATURES', 'n32', ' -mabi=n32', '', d)}"
 
+# user mode qemu doesn't support mips64 n32: "Invalid ELF image for this architecture"
+MACHINE_FEATURES_BACKFILL_CONSIDERED_append = " ${@bb.utils.contains('TUNE_FEATURES', 'n32', 'qemu-usermode', '', d)}"
+
 TUNEVALID[n64] = "MIPS64 n64 ABI"
 TUNECONFLICTS[n64] = "o32 n32"
 TUNE_CCARGS .= "${@bb.utils.contains('TUNE_FEATURES', 'n64', ' -mabi=64', '', d)}"

meta/conf/machine/include/powerpc/arch-powerpc64.inc

@@ -7,6 +7,9 @@ TUNECONFLICTS[m64] = "m32 nf"
 TUNE_CCARGS .= "${@bb.utils.contains('TUNE_FEATURES', 'm64', ' -m64', '', d)}"
 TUNE_ARCH .= "${@bb.utils.contains('TUNE_FEATURES', [ 'm64' ], 'powerpc64', '', d)}"
 
+# user mode qemu doesn't support ppc64
+MACHINE_FEATURES_BACKFILL_CONSIDERED_append = " ${@bb.utils.contains('TUNE_FEATURES', 'm64', 'qemu-usermode', '', d)}"
+
 AVAILTUNES += "powerpc64"
 TUNE_FEATURES_tune-powerpc64 = "m64 fpu-hard"
 BASE_LIB_tune-powerpc64 = "lib64"

meta/conf/machine/qemux86-64.conf

@@ -22,7 +22,10 @@ XSERVER = "xserver-xorg \
            xf86-input-evdev \
            xf86-video-cirrus \
            xf86-video-fbdev \
-           xf86-video-vmware"
+           xf86-video-vmware \
+           xf86-video-modesetting \
+           xserver-xorg-module-libint10 \
+           "
 
 MACHINE_FEATURES += "x86"
 

meta/conf/machine/qemux86.conf

@@ -21,7 +21,10 @@ XSERVER = "xserver-xorg \
            xf86-input-evdev \
            xf86-video-cirrus \
            xf86-video-fbdev \
-           xf86-video-vmware"
+           xf86-video-vmware \
+           xf86-video-modesetting \
+           xserver-xorg-module-libint10 \
+           "
 
 MACHINE_FEATURES += "x86"
 

meta/conf/toasterconf.json

@@ -13,7 +13,7 @@
             "name": "Local OpenEmbedded",
             "sourcetype": "local",
             "apiurl": "../../",
-            "branches": ["HEAD", "master", "jethro", "krogoth"],
+            "branches": ["HEAD", "jethro", "krogoth"],
             "layers": [
                 {
                     "name": "openembedded-core",
@@ -27,23 +27,17 @@
             "name": "OpenEmbedded",
             "sourcetype": "layerindex",
             "apiurl": "http://layers.openembedded.org/layerindex/api/",
-            "branches": ["master", "jethro", "krogoth"]
+            "branches": ["jethro", "krogoth"]
         },
         {
             "name": "Imported layers",
             "sourcetype": "imported",
             "apiurl": "",
-            "branches": ["master", "jethro", "krogoth", "HEAD"]
+            "branches": ["jethro", "krogoth", "HEAD"]
 
         }
     ],
     "bitbake" : [
-        {
-            "name": "master",
-            "giturl": "git://git.openembedded.org/bitbake",
-            "branch": "master",
-            "dirpath": ""
-        },
         {
             "name": "jethro",
             "giturl": "git://git.openembedded.org/bitbake",
@@ -64,18 +58,9 @@
         }
     ],
 
-    "defaultrelease": "master",
+    "defaultrelease": "krogoth",
 
     "releases": [
-        {
-            "name": "master",
-            "description": "OpenEmbedded master",
-            "bitbake": "master",
-            "branch": "master",
-            "defaultlayers": [ "openembedded-core" ],
-            "layersourcepriority": { "Imported layers": 99, "Local OpenEmbedded" : 10, "OpenEmbedded" :  0 },
-            "helptext": "Toaster will run your builds using the tip of the <a href=\"http://cgit.openembedded.org/openembedded-core/log/\">OpenEmbedded master</a> branch, where active development takes place. This is not a stable branch, so your builds might not work as expected."
-        },
         {
             "name": "jethro",
             "description": "OpenEmbedded Jethro",

meta/lib/oe/classextend.py

@@ -1,3 +1,5 @@
+import collections
+
 class ClassExtender(object):
     def __init__(self, extname, d):
         self.extname = extname
@@ -77,7 +79,7 @@ class ClassExtender(object):
             self.d.setVar("EXTENDPKGV", orig)
             return
         deps = bb.utils.explode_dep_versions2(deps)
-        newdeps = {}
+        newdeps = collections.OrderedDict()
         for dep in deps:
             newdeps[self.map_depends(dep)] = deps[dep]
 

meta/lib/oe/package.py

@@ -149,7 +149,7 @@ def npm_split_package_dirs(pkgdir):
                 if os.path.exists(pkgfile):
                     with open(pkgfile, 'r') as f:
                         data = json.loads(f.read())
-                packages[pkgname] = (relpth, data)
+                    packages[pkgname] = (relpth, data)
     # We want the main package for a module sorted *after* its subpackages
     # (so that it doesn't otherwise steal the files for the subpackage), so
     # this is a cheap way to do that whilst still having an otherwise

meta/lib/oe/recipeutils.py

@@ -255,7 +255,7 @@ def patch_recipe_file(fn, values, patch=False, relpath=''):
     changed, tolines = bb.utils.edit_metadata(fromlines, varlist, patch_recipe_varfunc, match_overrides=True)
 
     if remainingnames:
-        if tolines[-1].strip() != '':
+        if tolines and tolines[-1].strip() != '':
             tolines.append('\n')
         for k in remainingnames.keys():
             outputvalue(k, tolines)

meta/lib/oe/rootfs.py

@@ -121,6 +121,8 @@ class Rootfs(object):
 
         bb.note("  Copying back package database...")
         for dir in dirs:
+            if not os.path.isdir(self.image_rootfs + '-orig' + dir):
+                continue
             bb.utils.mkdirhier(self.image_rootfs + os.path.dirname(dir))
             shutil.copytree(self.image_rootfs + '-orig' + dir, self.image_rootfs + dir, symlinks=True)
 
@@ -907,7 +909,7 @@ class OpkgRootfs(DpkgOpkgRootfs):
 
         self.pm.install_complementary()
 
-        self._setup_dbg_rootfs(['/etc', '/var/lib/opkg'])
+        self._setup_dbg_rootfs(['/etc', '/var/lib/opkg', '/usr/lib/ssl'])
 
         execute_pre_post_process(self.d, opkg_post_process_cmds)
 

meta/lib/oeqa/oetest.py

@@ -58,14 +58,24 @@ class oeTest(unittest.TestCase):
 
     @classmethod
     def hasPackage(self, pkg):
-        for item in oeTest.tc.pkgmanifest.split('\n'):
-            if re.match(pkg, item):
+        """
+        True if the full package name exists in the manifest, False otherwise.
+        """
+        return pkg in oeTest.tc.pkgmanifest
+
+    @classmethod
+    def hasPackageMatch(self, match):
+        """
+        True if match exists in the manifest as a regular expression substring,
+        False otherwise.
+        """
+        for s in oeTest.tc.pkgmanifest:
+            if re.match(match, s):
                 return True
         return False
 
     @classmethod
     def hasFeature(self,feature):
-
         if feature in oeTest.tc.imagefeatures or \
                 feature in oeTest.tc.distrofeatures:
             return True
@@ -340,17 +350,18 @@ class ImageTestContext(TestContext):
         self.target = target
         self.host_dumper = host_dumper
 
+        self.pkgmanifest = {}
         manifest = os.path.join(d.getVar("DEPLOY_DIR_IMAGE", True),
                 d.getVar("IMAGE_LINK_NAME", True) + ".manifest")
         nomanifest = d.getVar("IMAGE_NO_MANIFEST", True)
         if nomanifest is None or nomanifest != "1":
             try:
                 with open(manifest) as f:
-                    self.pkgmanifest = f.read()
+                    for line in f:
+                        (pkg, arch, version) = line.strip().split()
+                        self.pkgmanifest[pkg] = (version, arch)
             except IOError as e:
                 bb.fatal("No package manifest file found. Did you build the image?\n%s" % e)
-        else:
-            self.pkgmanifest = ""
 
         self.sigterm = False
         self.origsigtermhandler = signal.getsignal(signal.SIGTERM)
@@ -396,8 +407,11 @@ class SDKTestContext(TestContext):
         if not hasattr(self, 'target_manifest'):
             self.target_manifest = d.getVar("SDK_TARGET_MANIFEST", True)
         try:
+            self.pkgmanifest = {}
             with open(self.target_manifest) as f:
-                 self.pkgmanifest = f.read()
+                for line in f:
+                    (pkg, arch, version) = line.strip().split()
+                    self.pkgmanifest[pkg] = (version, arch)
         except IOError as e:
             bb.fatal("No package manifest file found. Did you build the sdk image?\n%s" % e)
 

meta/lib/oeqa/runtime/_ptest.py

@@ -11,7 +11,7 @@ import subprocess
 def setUpModule():
     if not oeRuntimeTest.hasFeature("package-management"):
         skipModule("Image doesn't have package management feature")
-    if not oeRuntimeTest.hasPackage("smart"):
+    if not oeRuntimeTest.hasPackage("smartpm"):
         skipModule("Image doesn't have smart installed")
     if "package_rpm" != oeRuntimeTest.tc.d.getVar("PACKAGE_CLASSES", True).split()[0]:
         skipModule("Rpm is not the primary package manager")
@@ -105,7 +105,7 @@ class PtestRunnerTest(oeRuntimeTest):
     def test_ptestrunner(self):
         self.add_smart_channel()
         (runnerstatus, result) = self.target.run('which ptest-runner', 0)
-        cond = oeRuntimeTest.hasPackage("ptest-runner") and oeRuntimeTest.hasFeature("ptest") and oeRuntimeTest.hasPackage("-ptest") and (runnerstatus != 0)
+        cond = oeRuntimeTest.hasPackage("ptest-runner") and oeRuntimeTest.hasFeature("ptest") and oeRuntimeTest.hasPackageMatch("-ptest") and (runnerstatus != 0)
         if cond:
             self.install_packages(self.install_complementary("*-ptest"))
             self.install_packages(['ptest-runner'])

meta/lib/oeqa/runtime/buildiptables.py

@@ -11,7 +11,7 @@ class BuildIptablesTest(oeRuntimeTest):
     @classmethod
     def setUpClass(self):
         self.project = TargetBuildProject(oeRuntimeTest.tc.target, oeRuntimeTest.tc.d,
-                        "http://netfilter.org/projects/iptables/files/iptables-1.4.13.tar.bz2")
+                        "http://downloads.yoctoproject.org/mirror/sources/iptables-1.4.13.tar.bz2")
         self.project.download_archive()
 
     @testcase(206)

meta/lib/oeqa/runtime/parselogs.py

@@ -55,12 +55,21 @@ x86_common = [
     'Could not enable PowerButton event',
     'probe of LNXPWRBN:00 failed with error -22',
     'pmd_set_huge: Cannot satisfy',
+    'failed to setup card detect gpio',
+    'amd_nb: Cannot enumerate AMD northbridges',
+    'failed to retrieve link info, disabling eDP',
 ] + common_errors
 
 qemux86_common = [
     'wrong ELF class',
     "fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.",
     "can't claim BAR ",
+    'amd_nb: Cannot enumerate AMD northbridges',
+    'uvesafb: 5000 ms task timeout error',
+    'detected fb_set_par error, error code: -22',
+    'Getting VBE info block failed',
+    'vbe_init() failed with -22',
+    'uvesafb: mode switch failed',
 ] + common_errors
 
 ignore_errors = { 
@@ -110,11 +119,19 @@ ignore_errors = {
         '(EE) Failed to load module psbdrv',
         '(EE) open /dev/fb0: No such file or directory',
         '(EE) AIGLX: reverting to software rendering',
+        'dmi: Firmware registration failed.',
+        'ioremap error for 0x78',
         ] + x86_common,
     'intel-corei7-64' : x86_common,
     'crownbay' : x86_common,
     'genericx86' : x86_common,
-    'genericx86-64' : x86_common,
+    'genericx86-64' : [
+        'Direct firmware load for i915',
+        'Failed to load firmware i915',
+        'Failed to fetch GuC',
+        'Failed to initialize GuC',
+        'The driver is built-in, so to load the firmware you need to',
+        ] + x86_common,
     'edgerouter' : [
         'Fatal server error:',
         ] + common_errors,
@@ -153,6 +170,9 @@ class ParseLogsTest(oeRuntimeTest):
     def getMachine(self):
         return oeRuntimeTest.tc.d.getVar("MACHINE", True)
 
+    def getWorkdir(self):
+        return oeRuntimeTest.tc.d.getVar("WORKDIR", True)
+
     #get some information on the CPU of the machine to display at the beginning of the output. This info might be useful in some cases.
     def getHardwareInfo(self):
         hwi = ""
@@ -190,16 +210,19 @@ class ParseLogsTest(oeRuntimeTest):
 
     #copy the log files to be parsed locally
     def transfer_logs(self, log_list):
-        target_logs = 'target_logs'
+        workdir = self.getWorkdir()
+        self.target_logs = workdir + '/' + 'target_logs'
+        target_logs = self.target_logs
         if not os.path.exists(target_logs):
             os.makedirs(target_logs)
+        bb.utils.remove(self.target_logs + "/*")
         for f in log_list:
             self.target.copy_from(f, target_logs)
 
     #get the local list of logs
     def get_local_log_list(self, log_locations):
         self.transfer_logs(self.getLogList(log_locations))
-        logs = [ os.path.join('target_logs',f) for f in os.listdir('target_logs') if os.path.isfile(os.path.join('target_logs',f)) ]
+        logs = [ os.path.join(self.target_logs, f) for f in os.listdir(self.target_logs) if os.path.isfile(os.path.join(self.target_logs, f)) ]
         return logs
 
     #build the grep command to be used with filters and exclusions