1b4fc88a69
Updating to the latest korg -stable release that comprises
the following commits:
799441832db1 Linux 6.5.11
dd1756d79179 ASoC: SOF: sof-pci-dev: Fix community key quirk detection
aab16960e6e7 ALSA: hda: intel-dsp-config: Fix JSL Chromebook quirk detection
575d3966a7da serial: core: Fix runtime PM handling for pending tx
9f625a9ec6ad misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device support
fe3545fb7c39 dt-bindings: serial: rs485: Add rs485-rts-active-high
71a913eb5331 tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
7ffbf5db6963 tty: 8250: Add support for Intashield IX cards
8435b1f55760 tty: 8250: Add support for additional Brainboxes PX cards
21b8147a36f8 tty: 8250: Fix up PX-803/PX-857
98f984ff81de tty: 8250: Fix port count of PX-257
256a534427e9 tty: 8250: Add support for Intashield IS-100
933dde5b2082 tty: 8250: Add support for Brainboxes UP cards
a4a09f0ed3cd tty: 8250: Add support for additional Brainboxes UC cards
ca7f138b2c52 tty: 8250: Remove UC-257 and UC-431
19d34b73234a tty: n_gsm: fix race condition in status line change on dead connections
fd277724946d Bluetooth: hci_bcm4377: Mark bcm4378/bcm4387 as BROKEN_LE_CODED
885108988763 usb: raw-gadget: properly handle interrupted requests
9ee038590d80 usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm()
de5ac4d46304 usb: typec: tcpm: Add additional checks for contaminant
80105fc04b44 usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility
c99f302ea679 PCI: Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device
52d89332fbc6 ALSA: usb-audio: add quirk flag to enable native DSD for McIntosh devices
c75a5e421b07 mmap: fix error paths with dup_anon_vma()
578c20ab383f mmap: fix vma_iterator in error path of vma_merge()
cd91606eff46 perf evlist: Avoid frequency mode for the dummy event
65d457433a08 power: supply: core: Use blocking_notifier_call_chain to avoid RCU complaint
a58f5fabcab0 rust: types: make `Opaque` be `!Unpin`
7fba72536eb5 rust: make `UnsafeCell` the outer type in `Opaque`
07256dc046b1 drm/amd/display: Don't use fsleep for PSR exit waits
4ec5def87694 ceph_wait_on_conflict_unlink(): grab reference before dropping ->d_lock
fd652af1e1f9 io_uring: kiocb_done() should *not* trust ->ki_pos if ->{read,write}_iter() failed
fd318cc5b221 powerpc/mm: Fix boot crash with FLATMEM
c1d14ab7d666 r8152: Check for unplug in r8153b_ups_en() / r8153c_ups_en()
b233d39f7e15 r8152: Check for unplug in rtl_phy_patch_request()
19471af243b2 net: chelsio: cxgb4: add an error code check in t4_load_phy_fw
17002b8f2606 riscv: dts: thead: set dma-noncoherent to soc bus
9f0400d31e56 drm/amdgpu: Reserve fences for VM update
6ca3c25f5472 platform/mellanox: mlxbf-tmfifo: Fix a warning message
6cca6f997088 netfilter: nf_tables: audit log object reset once per table
99d311781fe5 LoongArch: Disable WUC for pgprot_writecombine() like ioremap_wc()
6b43fea5f245 LoongArch: Replace kmap_atomic() with kmap_local_page() in copy_user_highpage()
c86a4fbc2d5a LoongArch: Export symbol invalid_pud_table for modules building
74f9c03ecf79 LoongArch: Use SYM_CODE_* to annotate exception handlers
19fe554e5fcf gpu/drm: Eliminate DRM_SCHED_PRIORITY_UNSET
4ca54e8b459d drm/amdgpu: Unset context priority is now invalid
4debab37b1bc ASoC: da7219: Correct the process of setting up Gnd switch in AAD
22da32b45717 scsi: mpt3sas: Fix in error path
8377f82beacf fbdev: uvesafb: Call cn_del_callback() at the end of uvesafb_exit()
0a997e6eeee8 fbdev: omapfb: fix some error codes
93ff3297b04a drm/ttm: Reorder sys manager cleanup step
0074d0980bf8 s390/kasan: handle DCSS mapping in memory holes
652d60ecb7a5 ASoC: codecs: tas2780: Fix log of failed reset via I2C.
4dd62532e05c ASoC: rt5650: fix the wrong result of key button
ce5329ee79e5 efi: fix memory leak in krealloc failure handling
c76be4af694e x86/efistub: Don't try to print after ExitBootService()
5c4e4f31643d net/mlx5: Bridge, fix peer entry ageing in LAG mode
ead8d9a6b6ff netfilter: nfnetlink_log: silence bogus compiler warning
988ed1c96c42 ASoC: soc-dapm: Add helper for comparing widget name
c68a8c5b50b9 spi: npcm-fiu: Fix UMA reads when dummy.nbytes == 0
6777f23bca89 fs/ntfs3: Avoid possible memory leak
b9ec0e799a2d fs/ntfs3: Fix directory element type detection
0030ccd87a87 fs/ntfs3: Fix NULL pointer dereference on error in attr_allocate_frame()
3228a2e0e5a7 fs/ntfs3: Fix possible NULL-ptr-deref in ni_readpage_cmpr()
d408008a881a fs/ntfs3: Do not allow to change label if volume is read-only
da05aa786c20 fs/ntfs3: Add more info into /proc/fs/ntfs3/<dev>/volinfo
31baaf864b39 fs/ntfs3: Fix alternative boot searching
1d7dd485108d fs/ntfs3: Add more attributes checks in mi_enum_attr()
36ffca949ab2 fs/ntfs3: Use kvmalloc instead of kmalloc(... __GFP_NOWARN)
28ece3bd8596 fs/ntfs3: Write immediately updated ntfs state
8d3d7dbdbddd fs/ntfs3: Add ckeck in ni_update_parent()
78b4576f0e38 fbdev: atyfb: only use ioremap_uc() on i386 and ia64
83a28f46ed3c Input: synaptics-rmi4 - handle reset delay when using SMBus trsnsport
a18a7cc55c5b media: i2c: ov8858: Don't set fwnode in the driver
d4c3cb925e65 powerpc/85xx: Fix math emulation exception
0cae483a9c8e ata: pata_parport: fit3: implement IDE command set registers
e2fa6f732a73 ata: pata_parport: add custom version of wait_after_reset
142ac0fda553 dmaengine: ste_dma40: Fix PM disable depth imbalance in d40_probe
5976e4ed1405 irqchip/stm32-exti: add missing DT IRQ flag translation
b65f1eec2d8e irqchip/riscv-intc: Mark all INTC nodes as initialized
4b0dfa2fc745 can: flexcan: remove the auto stop mode for IMX93
4bd493ce8d74 arm64: dts: imx93: add the Flex-CAN stop mode by GPR
92705546718b net: sched: cls_u32: Fix allocation size in u32_init()
6f9195596a6f ASoC: tlv320adc3xxx: BUG: Correct micbias setting
31af9e3be3cd ASoC: core: Do not call link_exit() on uninitialized rtd objects
0716f52fa334 ASoC: fsl-asoc-card: use integer type for fll_id and pll_id
ac947c0992ef coresight: tmc-etr: Disable warnings for allocation failures
4dfa1e33d481 ASoC: simple-card: fixup asoc_simple_probe() error handling
8555438a0d87 ASoC: Intel: sof_sdw: add support for SKU 0B14
(From OE-Core rev: fb7733d173258bb951aa924946266bab309362b1)
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 0f56f12e7353f97855befb765ca8c0117736cb96)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Poky
Poky is an integration of various components to form a pre-packaged build system and development environment which is used as a development and validation tool by the Yocto Project. It features support for building customised embedded style device images and custom containers. There are reference demo images ranging from X11/GTK+ to Weston, commandline and more. The system supports cross-architecture application development using QEMU emulation and a standalone toolchain and SDK suitable for IDE integration.
Additional information on the specifics of hardware that Poky supports is available in README.hardware. Further hardware support can easily be added in the form of BSP layers which extend the systems capabilities in a modular way. Many layers are available and can be found through the layer index.
As an integration layer Poky consists of several upstream projects such as BitBake, OpenEmbedded-Core, Yocto documentation, the 'meta-yocto' layer which has configuration and hardware support components. These components are all part of the Yocto Project and OpenEmbedded ecosystems.
The Yocto Project has extensive documentation about the system including a reference manual which can be found at https://docs.yoctoproject.org/
OpenEmbedded is the build architecture used by Poky and the Yocto project. For information about OpenEmbedded, see the OpenEmbedded website.
Contribution Guidelines
Please refer to our contributor guide here: https://docs.yoctoproject.org/dev/contributor-guide/ for full details on how to submit changes.
Where to Send Patches
As Poky is an integration repository (built using a tool called combo-layer), patches against the various components should be sent to their respective upstreams:
OpenEmbedded-Core (files in meta/, meta-selftest/, meta-skeleton/, scripts/):
- Git repository: https://git.openembedded.org/openembedded-core/
- Mailing list: openembedded-core@lists.openembedded.org
BitBake (files in bitbake/):
- Git repository: https://git.openembedded.org/bitbake/
- Mailing list: bitbake-devel@lists.openembedded.org
Documentation (files in documentation/):
- Git repository: https://git.yoctoproject.org/cgit/cgit.cgi/yocto-docs/
- Mailing list: docs@lists.yoctoproject.org
meta-yocto (files in meta-poky/, meta-yocto-bsp/):
- Git repository: https://git.yoctoproject.org/cgit/cgit.cgi/meta-yocto
- Mailing list: poky@lists.yoctoproject.org
If in doubt, check the openembedded-core git repository for the content you intend to modify as most files are from there unless clearly one of the above categories. Before sending, be sure the patches apply cleanly to the current git repository branch in question.