Shortlog of the changes: 8576fa45c10e Linux 4.1.36 39f99860357c kbuild: add -fno-PIE bf5d3d296abf firewire: net: fix fragmented datagram_size off-by-one c604dec3d5a6 firewire: net: guard against rx buffer overflows 9fe6256c0020 parisc: Ensure consistent state when switching to kernel stack at syscall entry 83a474ed7003 ovl: fsync after copy-up c0b309f18b01 virtio: console: Unlock vqs while freeing buffers 4fe9ae4d3fcf md: be careful not lot leak internal curr_resync value into metadata. -- (all) e1e5cab9b43c md: sync sync_completed has correct value as recovery finishes. 97d53c4d89e0 scsi: arcmsr: Send SYNCHRONIZE_CACHE command to firmware d207c6603fc6 scsi: scsi_debug: Fix memory leak if LBP enabled and module is unloaded 169eb57c9e8d drm/radeon/si_dpm: workaround for SI kickers c1593e5dcc2a drm/dp/mst: Check peer device type before attempting EDID read e5c6bbbcc7be drm/dp/mst: add some defines for logical/physical ports dadd5803301f drm/dp/mst: Clear port->pdt when tearing down the i2c adapter a2d4bd9c99cc KVM: MIPS: Precalculate MMIO load resume PC b05ff0cb0dea KVM: MIPS: Make ERET handle ERL before EXL 90a107c0b85b drm/radeon: drop register readback in cayman_cp_int_cntl_setup 9a9a2373142a scsi: megaraid_sas: Fix data integrity failure for JBOD (passthrough) devices 1b15bd739689 Revert "drm/radeon: fix DP link training issue with second 4K monitor" 5bc028b10d04 powerpc: Convert cmp to cmpd in idle enter sequence 00a4335dfaa5 drm/radeon/si_dpm: Limit clocks on HD86xx part 469bc68e081c drm/radeon/si/dpm: add workaround for for Jet parts 85a2af9f690a USB: serial: cp210x: fix tiocmget error handling 0854ce492ec3 Input: i8042 - add XMG C504 to keyboard reset table 0e9bbbdfe9f8 ALSA: hda - Merge RIRB_PRE_DELAY into CTX_WORKAROUND caps 02426cf24407 mac80211: discard multicast and 4-addr A-MSDUs f065a553f36e ubifs: Fix regression in ubifs_readdir() 5fdb4fad291f GenWQE: Fix bad page access during abort of resource allocation 55a2f87cd564 mm/list_lru.c: avoid error-path NULL pointer deref 52e7b6bd8378 btrfs: fix races on root_log_ctx lists 9f2d48f0745f vt: clear selection before resizing 93ec720c6f10 tty: limit terminal size to 4M chars ca963122cab2 ALSA: usb-audio: Add quirk for Syntek STK1160 3dc8f1f0decb KEYS: Fix short sprintf buffer in /proc/keys show function 1f7ff6f7910e hv: do not lose pending heartbeat vmbus packets 9662d19bab68 mei: txe: don't clean an unprocessed interrupt cause. a64291d578dd ANDROID: binder: Clear binder and cookie when setting handle in flat binder struct 11924cba404d ANDROID: binder: Add strong ref checks 39709c84807f dm table: fix missing dm_put_target_type() in dm_table_add_target() c91812c8ef76 usb: increase ohci watchdog delay to 275 msec 51b231bd1a95 arm64: KVM: Take S1 walks into account when determining S2 write faults bb21e0295064 arm/arm64: KVM: Handle out-of-RAM cache maintenance as a NOP 7fbfac87fbf5 USB: serial: fix potential NULL-dereference at probe 605a6960617f xhci: workaround for hosts missing CAS bit c23a6dce1147 xhci: add restart quirk for Intel Wildcatpoint PCH 4c17f91bb370 kvm: x86: memset whole irq_eoi 9c5e89d59d56 libxfs: clean up _calc_dquots_per_chunk d1375c3e4f2e target: Don't override EXTENDED_COPY xcopy_pt_cmd SCSI status code ac49951623e1 target: Re-add missing SCF_ACK_KREF assignment in v4.1.y eaf55207fe3b ubifs: Abort readdir upon error b9ce8700a2e3 UBIFS: Fix possible memory leak in ubifs_readdir() cad1ca2a9485 ubifs: Fix xattr_names length in exit paths dfeb7e4f30e9 arm64: percpu: rewrite ll/sc loops in assembly 3c9c01324032 powerpc/mm: Prevent unlikely crash in copro_calculate_slb() c1f5e5f89b99 isofs: Do not return EACCES for unknown filesystems b15662c8e266 irqchip/gic-v3-its: Fix entry size mask for GITS_BASER af17243fc1b4 arm64: kernel: Init MDCR_EL2 even in the absence of a PMU c911b72eaff1 USB: serial: ftdi_sio: add support for Infineon TriBoard TC2X7 59eabe8bb60f memstick: rtsx_usb_ms: Manage runtime PM when accessing the device 86559fc191ca memstick: rtsx_usb_ms: Runtime resume the device when polling for cards a89634cf709b mmc: rtsx_usb_sdmmc: Handle runtime PM while changing the led e79c2f2f7b30 mmc: rtsx_usb_sdmmc: Avoid keeping the device runtime resumed when unused f125e7f2285c mmc: sdhci: cast unsigned int to unsigned long long to avoid unexpeted error 517052446f36 usb: gadget: function: u_ether: don't starve tx request queue 66f38bf99faa ceph: fix error handling in ceph_read_iter 9e9ca450cd93 irqchip/gicv3: Handle loop timeout proper 88b6c9f4146a drm/radeon: change vblank_time's calculation method to reduce computational error. dcf4c1144f3a jbd2: fix incorrect unlock on j_list_lock a3da255ead60 scsi: Fix use-after-free 8df981058e4f mmc: core: Annotate cmd_hdr as __le32 7ea3d2e9c6aa x86/mm: Expand the exception table logic to allow new handling options (From OE-Core rev: 41ab5422d4dc62b6e21ccad975b2a22960d3a44b) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Poky
Poky is an integration of various components to form a complete prepackaged build system and development environment. It features support for building customised embedded device style images. There are reference demo images featuring a X11/Matchbox/GTK themed UI called Sato. The system supports cross-architecture application development using QEMU emulation and a standalone toolchain and SDK with IDE integration.
Additional information on the specifics of hardware that Poky supports is available in README.hardware. Further hardware support can easily be added in the form of layers which extend the systems capabilities in a modular way.
As an integration layer Poky consists of several upstream projects such as BitBake, OpenEmbedded-Core, Yocto documentation and various sources of information e.g. for the hardware support. Poky is in turn a component of the Yocto Project.
The Yocto Project has extensive documentation about the system including a reference manual which can be found at: http://yoctoproject.org/documentation
OpenEmbedded-Core is a layer containing the core metadata for current versions of OpenEmbedded. It is distro-less (can build a functional image with DISTRO = "nodistro") and contains only emulated machine support.
For information about OpenEmbedded, see the OpenEmbedded website: http://www.openembedded.org/
Where to Send Patches
As Poky is an integration repository (built using a tool called combo-layer), patches against the various components should be sent to their respective upstreams:
bitbake: Git repository: http://git.openembedded.org/bitbake/ Mailing list: bitbake-devel@lists.openembedded.org
documentation: Git repository: http://git.yoctoproject.org/cgit/cgit.cgi/yocto-docs/ Mailing list: yocto@yoctoproject.org
meta-poky, meta-yocto-bsp: Git repository: http://git.yoctoproject.org/cgit/cgit.cgi/meta-yocto(-bsp) Mailing list: poky@yoctoproject.org
Everything else should be sent to the OpenEmbedded Core mailing list. If in doubt, check the oe-core git repository for the content you intend to modify. Before sending, be sure the patches apply cleanly to the current oe-core git repository.
Git repository: http://git.openembedded.org/openembedded-core/
Mailing list: openembedded-core@lists.openembedded.org
Note: The scripts directory should be treated with extra care as it is a mix of oe-core and poky-specific files.