Updating to the korg stable relase with the following shortlog summary: 8f8ee9706b0a Linux 4.4.60 84bd21a708b8 padata: avoid race in reordering 5cca175b6cda blk: Ensure users for current->bio_list can see the full list. 2cbd78f4239b blk: improve order of bio handling in generic_make_request() 063d30f187f5 power: reset: at91-poweroff: timely shutdown LPDDR memories 42462d23e60b KVM: kvm_io_bus_unregister_dev() should never fail 3a1246b46df5 rtc: s35390a: improve irq handling a55ae9d1937b rtc: s35390a: implement reset routine as suggested by the reference fdd4bc9313e5 rtc: s35390a: make sure all members in the output are set b3ed3864912e rtc: s35390a: fix reading out alarm 6280ac931a23 MIPS: Lantiq: Fix cascaded IRQ setup 47e2fe17d14d mm, hugetlb: use pte_present() instead of pmd_present() in follow_huge_pmd() ef55c3df5dbd drm/radeon: Override fpfn for all VRAM placements in radeon_evict_flags 3eb392056aeb KVM: x86: clear bus pointer when destroyed eac3ab3e6915 USB: fix linked-list corruption in rh_call_control() 0a1757cfa5ba tty/serial: atmel: fix TX path in atmel_console_write() 74b8fc017d76 tty/serial: atmel: fix race condition (TX+DMA) 566a8711a7dd ACPI: Do not create a platform_device for IOAPIC/IOxAPIC 3342857ac074 ACPI: Fix incompatibility with mcount-based function graph tracing ab48ab614b8c ASoC: atmel-classd: fix audio clock rate ce3dcfdbff04 ALSA: hda - fix a problem for lineout on a Dell AIO machine a90d7447e4a1 ALSA: seq: Fix race during FIFO resize 75a03869c93a scsi: libsas: fix ata xfer length a92f411914ca scsi: sg: check length passed to SG_NEXT_CMD_LEN 18639c4bad72 scsi: mpt3sas: fix hang on ata passthrough commands 1eed198ce16b xen/setup: Don't relocate p2m over existing one ba46d8fab00a libceph: force GFP_NOIO for socket allocations 61a4577c9a44 Linux 4.4.59 2bed5987692c sched/rt: Add a missing rescheduling point 7a5202190810 fscrypt: remove broken support for detecting keyring key revocation 573341eba9c4 metag/ptrace: Reject partial NT_METAG_RPIPE writes e441102d8c07 metag/ptrace: Provide default TXSTATUS for short NT_PRSTATUS 2d9bc3695012 metag/ptrace: Preserve previous registers for short regset write 962b95a88574 sparc/ptrace: Preserve previous registers for short regset write c8693666856c mips/ptrace: Preserve previous registers for short regset write e1dc8904b33b h8300/ptrace: Fix incorrect register transfer count 6e174bbd0631 c6x/ptrace: Remove useless PTRACE_SETREGSET implementation 800791e7e0fd pinctrl: qcom: Don't clear status bit on irq_unmask 927d04793f8a virtio_balloon: init 1st buffer in stats vq 22c9e7c092f6 xfrm_user: validate XFRM_MSG_NEWAE incoming ESN size harder cce7e56dd73f xfrm_user: validate XFRM_MSG_NEWAE XFRMA_REPLAY_ESN_VAL replay_window a9a76a3e318e xfrm: policy: init locks early 0a5766a6a73b Linux 4.4.58 f8a62dbc7902 crypto: algif_hash - avoid zero-sized array 540d6d756ff8 fbcon: Fix vc attr at deinit ac601978a2aa serial: 8250_pci: Detach low-level driver during PCI error recovery b8687d83b34c ACPI / blacklist: Make Dell Latitude 3350 ethernet work d3607fc2976e ACPI / blacklist: add _REV quirks for Dell Precision 5520 and 3520 4e2c66bb6658 uvcvideo: uvc_scan_fallback() for webcams with broken chain ce5494107946 s390/zcrypt: Introduce CEX6 toleration 7023f502c835 block: allow WRITE_SAME commands with the SG_IO ioctl 9fd9e1436380 vfio/spapr: Postpone allocation of userspace version of TCE table 4110080574ac PCI: Do any VF BAR updates before enabling the BARs bcbdcf48469b PCI: Ignore BAR updates on virtual functions d4f09ea7e35c PCI: Update BARs using property bits appropriate for type 131f7969048b PCI: Don't update VF BARs while VF memory space is enabled 40a85d68185f PCI: Decouple IORESOURCE_ROM_ENABLE and PCI_ROM_ADDRESS_ENABLE 1278c9f87f11 PCI: Add comments about ROM BAR updating cef498a2c75a PCI: Remove pci_resource_bar() and pci_iov_resource_bar() a87693ec42f2 PCI: Separate VF BAR updates from standard BAR updates e4ce31c0265d x86/hyperv: Handle unknown NMIs on one CPU when unknown_nmi_panic ca7e3bdc9c7e igb: add i211 to i210 PHY workaround 4db313df4946 igb: Workaround for igb i210 firmware issue ec52364445a4 xen: do not re-use pirq number cached in pci device msi msg data 6d43e485e006 xfs: clear _XBF_PAGES from buffers when readahead page f154de03f416 USB: usbtmc: add missing endpoint sanity check 74c8dd066cc0 nl80211: fix dumpit error path RTNL deadlocks 7922c1becb36 xfs: fix up xfs_swap_extent_forks inline extent handling c4cf86f69597 xfs: don't allow di_size with high bit set 48da8f817b9d libceph: don't set weight to IN when OSD is destroyed 73dd1edf50a6 raid10: increment write counter after bio is split 175039632065 cpufreq: Restore policy min/max limits on CPU online e1af444e52ce ARM: dts: at91: sama5d2: add dma properties to UART nodes 2705b183263b ARM: at91: pm: cpu_idle: switch DDR to power-down mode 55b6c187cf9d iommu/vt-d: Fix NULL pointer dereference in device_to_iommu c856b66c8aac xen/acpi: upload PM state from init-domain to Xen 52e40a2fcc39 mmc: sdhci: Do not disable interrupts while waiting for clock 27d9bf096406 ext4: mark inode dirty after converting inline directory c7d1545c48ff parport: fix attempt to write duplicate procfiles 7413d1f8991e iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3 8f189e1d0eca iio: adc: ti_am335x_adc: fix fifo overrun recovery dcf879cb9ed3 mmc: ushc: fix NULL-deref at probe 2c251e568e1a uwb: hwa-rc: fix NULL-deref at probe 815321da2e26 uwb: i1480-dfu: fix NULL-deref at probe 14a2032287d4 usb: hub: Fix crash after failure to read BOS descriptor 47285be050ca usb: musb: cppi41: don't check early-TX-interrupt for Isoch transfer a7cb1fafe429 USB: wusbcore: fix NULL-deref at probe d6389d6abb8a USB: idmouse: fix NULL-deref at probe a7712869e2e7 USB: lvtest: fix NULL-deref at probe 73490abe249c USB: uss720: fix NULL-deref at probe 2c929ea720f9 usb-core: Add LINEAR_FRAME_INTR_BINTERVAL USB quirk 8a8a8007871a usb: gadget: f_uvc: Fix SuperSpeed companion descriptor's wBytesPerInterval 19f0fe67b9d0 ACM gadget: fix endianness in notifications 9218793a39de USB: serial: qcserial: add Dell DW5811e 8f0f081647cc USB: serial: option: add Quectel UC15, UC20, EC21, and EC25 modems 1ea551eec703 ALSA: hda - Adding a group of pin definition to fix headset problem ed00b613bbcb ALSA: ctxfi: Fix the incorrect check of dma_set_mask() call b55ffcb1bc8a ALSA: seq: Fix racy cell insertions during snd_seq_pool_done() 549993001e7d Input: sur40 - validate number of endpoints before using them b3c4c0c470b5 Input: kbtab - validate number of endpoints before using them c05490638ddf Input: cm109 - validate number of endpoints before using them e916f1d6188e Input: yealink - validate number of endpoints before using them 0812c6855c89 Input: hanwang - validate number of endpoints before using them 6bed7c1e2b78 Input: ims-pcu - validate number of endpoints before using them a07d3669654a Input: iforce - validate number of endpoints before using them 5f9243e4fca6 Input: i8042 - add noloop quirk for Dell Embedded Box PC 3000 9ac7bd114e13 Input: elan_i2c - add ASUS EeeBook X205TA special touchpad fw afaed241928f tcp: initialize icsk_ack.lrcvtime at session start time 95aa915c2f04 socket, bpf: fix sk_filter use after free in sk_clone_lock 38dece41e5be ipv4: provide stronger user input validation in nl_fib_input() 85f00dac91a1 net: bcmgenet: remove bcmgenet_internal_phy_setup() fdcee7c1e2f8 net/mlx5e: Count LRO packets correctly 9d1894cba25c net/mlx5: Increase number of max QPs in default profile 610c6bcc5fcf net: unix: properly re-increment inflight counter of GC discarded candidates ae43f9360a21 amd-xgbe: Fix jumbo MTU processing on newer hardware f3126725228c net: properly release sk_frag.page 12f0bffc489d net: bcmgenet: Do not suspend PHY if Wake-on-LAN is enabled b362d6735156 net/openvswitch: Set the ipv6 source tunnel key address attribute correctly a5c3f390eb77 Linux 4.4.57 5fa513cb0721 ext4: fix fencepost in s_first_meta_bg validation d88b83e66bbf percpu: acquire pcpu_lock when updating pcpu_nr_empty_pop_pages e08f608ab428 gfs2: Avoid alignment hole in struct lm_lockname 4f47ca488256 isdn/gigaset: fix NULL-deref at probe d267ecbdfdb4 target: Fix VERIFY_16 handling in sbc_parse_cdb 246760c61d9c scsi: libiscsi: add lock around task lists to fix list corruption regression 82bd06aba880 scsi: lpfc: Add shutdown method for kexec 0a621633cdfa target/pscsi: Fix TYPE_TAPE + TYPE_MEDIMUM_CHANGER export 582f548924cd md/raid1/10: fix potential deadlock b24473976b98 powerpc/boot: Fix zImage TOC alignment 09875d1393d4 cpufreq: Fix and clean up show_cpuinfo_cur_freq() f02729f2ab87 perf/core: Fix event inheritance on fork() 4cb0c0b73d1c give up on gcc ilog2() constant optimizations 6052eb871217 kernek/fork.c: allocate idle task for a CPU always on its local node 6cc5b73d7969 hv_netvsc: use skb_get_hash() instead of a homegrown implementation cea050150323 tpm_tis: Use devm_free_irq not free_irq 13a26889cbc1 drm/amdgpu: add missing irq.h include 68ea3948ed3d s390/pci: fix use after free in dma_init 50730d7f361f KVM: PPC: Book3S PR: Fix illegal opcode emulation e2d9577854f5 xen/qspinlock: Don't kick CPU if IRQ is not initialized b1a0f744f8e6 Drivers: hv: avoid vfree() on crash 0a2512768f16 Drivers: hv: balloon: don't crash when memory is added in non-sorted order 3787a071d145 pinctrl: cherryview: Do not mask all interrupts in probe 962c66c74184 ACPI / video: skip evaluating _DOD when it does not exist 12e1a3cd11ea cxlflash: Increase cmd_per_lun for better throughput f8c07cbc2e72 crypto: mcryptd - Fix load failure 10659b8f5c60 crypto: cryptd - Assign statesize properly c78c3376ec67 crypto: ghash-clmulni - Fix load failure 45d9558837d4 USB: don't free bandwidth_mutex too early ac1a97d8a562 usb: core: hub: hub_port_init lock controller instead of bus (From OE-Core rev: 52a6823d4279d580a2b4bbfdc06234a903a17d93) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Poky
Poky is an integration of various components to form a complete prepackaged build system and development environment. It features support for building customised embedded device style images. There are reference demo images featuring a X11/Matchbox/GTK themed UI called Sato. The system supports cross-architecture application development using QEMU emulation and a standalone toolchain and SDK with IDE integration.
Additional information on the specifics of hardware that Poky supports is available in README.hardware. Further hardware support can easily be added in the form of layers which extend the systems capabilities in a modular way.
As an integration layer Poky consists of several upstream projects such as BitBake, OpenEmbedded-Core, Yocto documentation and various sources of information e.g. for the hardware support. Poky is in turn a component of the Yocto Project.
The Yocto Project has extensive documentation about the system including a reference manual which can be found at: http://yoctoproject.org/documentation
OpenEmbedded-Core is a layer containing the core metadata for current versions of OpenEmbedded. It is distro-less (can build a functional image with DISTRO = "nodistro") and contains only emulated machine support.
For information about OpenEmbedded, see the OpenEmbedded website: http://www.openembedded.org/
Where to Send Patches
As Poky is an integration repository (built using a tool called combo-layer), patches against the various components should be sent to their respective upstreams:
bitbake: Git repository: http://git.openembedded.org/bitbake/ Mailing list: bitbake-devel@lists.openembedded.org
documentation: Git repository: http://git.yoctoproject.org/cgit/cgit.cgi/yocto-docs/ Mailing list: yocto@yoctoproject.org
meta-poky, meta-yocto-bsp: Git repository: http://git.yoctoproject.org/cgit/cgit.cgi/meta-yocto(-bsp) Mailing list: poky@yoctoproject.org
Everything else should be sent to the OpenEmbedded Core mailing list. If in doubt, check the oe-core git repository for the content you intend to modify. Before sending, be sure the patches apply cleanly to the current oe-core git repository.
Git repository: http://git.openembedded.org/openembedded-core/
Mailing list: openembedded-core@lists.openembedded.org
Note: The scripts directory should be treated with extra care as it is a mix of oe-core and poky-specific files.