mirror of
https://git.yoctoproject.org/poky
synced 2026-02-10 10:43:02 +01:00
67628ea66b
Fixed:
MACHINE = "beaglebone-yocto"
KERNEL_CLASSES += "kernel-fitimage"
KERNEL_IMAGETYPE_beaglebone-yocto = "fitImage"
UBOOT_MACHINE_beaglebone-yocto = "am335x_boneblack_vboot_config"
UBOOT_MKIMAGE_DTCOPTS = "-I dts -O dtb -p 2000"
UBOOT_SIGN_KEYDIR = "${TOPDIR}/conf"
UBOOT_SIGN_KEYNAME = "dev"
UBOOT_SIGN_ENABLE = "1"
IMAGE_INSTALL_remove = "kernel-image-zimage"
$ cd conf
$ openssl genrsa -F4 -out dev.key 2048
$ openssl req -batch -new -x509 -key dev.key -out dev.crt
$ cd ../
$ bitbake u-boot linux-yocto
$ grep signature tmp/deploy/images/beaglebone-yocto/*.dtb
Binary file tmp/deploy/images/beaglebone-yocto/u-boot-beaglebone-yocto-2018.07-r0.dtb matches
Binary file tmp/deploy/images/beaglebone-yocto/u-boot-beaglebone-yocto.dtb matches
Binary file tmp/deploy/images/beaglebone-yocto/u-boot.dtb matches
And there would be no signature info when rebuild from sstate:
$ bitbake u-boot linux-yocto -cclean
$ bitbake u-boot linux-yocto
$ grep signature tmp/deploy/images/beaglebone-yocto/*.dtb
No result
This s because kernel directly edit ${DEPLOY_DIR_IMAGE}/u-boot.dtb, (Note, it
is global ${DEPLOY_DIR_IMAGE}, not recipe's DEPLOYDIR), so that the modified
info is not in sstate, and would be lost when rebuild from sstate.
There are other problems in previouse code:
- The u-boot.dtb is provided by u-boot, but edited by kernel during signing, so
it should be deployed by kernel rather than u-boot.
- The u-boot.do_concat_dtb directly install files to global ${DEPLOY_DIR_IMAGE},
this is incorrect, the ${DEPLOY_DIR_IMAGE} should be installed by do_deploy.
- It seems that it assumes do_deploy depends on do_install according the comments,
but they have no relationships:
# do_concat_dtb is scheduled _before_ do_install as it overwrite the
# u-boot.bin in both DEPLOYDIR and DEPLOY_IMAGE_DIR.
- The do_concat_dtb should be run after do_compile, but it doesn't have this
dependency.
Make u-boot install u-boot.dtb to ${datadir}, kernel copies u-boot.dtb from
${STAGING_DATADIR} to ${B} and deploy it can fix the problem.
[YOCTO #12112]
Reported-by: Christian Andersen <c.andersen@kostal.com>
(From OE-Core rev: 493f70cfb177f1d452a13329647a38642bf2b161)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
QEMU Emulation Targets ====================== To simplify development, the build system supports building images to work with the QEMU emulator in system emulation mode. Several architectures are currently supported in 32 and 64 bit variants: * ARM (qemuarm + qemuarm64) * x86 (qemux86 + qemux86-64) * PowerPC (qemuppc only) * MIPS (qemumips + qemumips64) Use of the QEMU images is covered in the Yocto Project Reference Manual. The appropriate MACHINE variable value corresponding to the target is given in brackets.