81c58352d8
Updating linux-yocto/5.10 to the latest korg -stable release that comprises
the following commits:
71046eac2db9 Linux 5.10.53
6cd9bd2a2ddb udp: annotate data races around unix_sk(sk)->gso_size
bfdb38a4268a drm/panel: nt35510: Do not fail if DSI read fails
0d90d8492fb9 perf test bpf: Free obj_buf
a9f36bf3613c bpf: Track subprog poke descriptors correctly and fix use-after-free
782d71e29b29 bpftool: Properly close va_list 'ap' by va_end() on error
2381b8e882d0 tools: bpf: Fix error in 'make -C tools/ bpf_install'
638632997c31 tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path
2fee3cf4c97b ipv6: tcp: drop silly ICMPv6 packet too big messages
ad4ba3404931 tcp: fix tcp_init_transfer() to not reset icsk_ca_initialized
d60f07bcb76f tcp: annotate data races around tp->mtu_info
ea66fcb29605 tcp: consistently disable header prediction for mptcp
c28c747e37db ARM: dts: tacoma: Add phase corrections for eMMC
e55160537d76 ARM: dts: aspeed: Fix AST2600 machines line names
ff4b8f35c96c kbuild: do not suppress Kconfig prompts for silent build
0d514185ae79 dma-buf/sync_file: Don't leak fences on merge failure
f33605908a9b net: fddi: fix UAF in fza_probe
66c73f187d1e net: dsa: properly check for the bridge_leave methods in dsa_switch_bridge_leave()
7d7d0e84ac0d Revert "mm/shmem: fix shmem_swapin() race with swapoff"
2179d96ec702 net: validate lwtstate->data before returning from skb_tunnel_info()
b61d8814c477 net: send SYNACK packet with accepted fwmark
f2a062fcfe1d net: ti: fix UAF in tlan:remove_one
b560521eca03 net: qcom/emac: fix UAF in emac:remove
dbbf5b957bd9 net: moxa: fix UAF in moxart_mac_probe
88ff9ec9c67a net: ip_tunnel: fix mtu calculation for ETHER tunnel devices
846829e75db5 net: bcmgenet: Ensure all TX/RX queues DMAs are disabled
b9fa66072fee net: netdevsim: use xso.real_dev instead of xso.dev in callback functions of struct xfrmdev_ops
59070cc43d1d net: bridge: sync fdb to new unicast-filtering ports
7b5a2910e782 net/sched: act_ct: remove and free nf_table callbacks
6d4476236f79 vmxnet3: fix cksum offload issues for tunnels with non-default udp ports
c3bc9ce7d400 net/sched: act_ct: fix err check for nf_conntrack_confirm
fc40fdefd94a netfilter: ctnetlink: suspicious RCU usage in ctnetlink_dump_helpinfo
34365de50806 net: ipv6: fix return value of ip6_skb_dst_mtu
73146745ff28 net: dsa: mv88e6xxx: enable devlink ATU hash param for Topaz
a8c7ba368748 net: dsa: mv88e6xxx: enable .rmu_disable() on Topaz
14cd8ce80ad7 net: dsa: mv88e6xxx: use correct .stats_set_histogram() on Topaz
c657413dcddf net: dsa: mv88e6xxx: enable .port_set_policy() on Topaz
fcb970edc0be net: bcmgenet: ensure EXT_ENERGY_DET_MASK is clear
4e275a4aca68 usb: cdns3: Enable TDL_CHK only for OUT ep
ce6ee46e0f39 mm/page_alloc: fix memory map initialization for descending nodes
9e1cf2d1ed37 mm/userfaultfd: fix uffd-wp special cases for fork()
84ff5f66c3f6 mm/thp: simplify copying of huge zero page pmd when fork
a62177b35730 f2fs: Show casefolding support only when supported
277b311ae170 Revert "swap: fix do_swap_page() race with swapoff"
d92aa22f2419 arm64: dts: marvell: armada-37xx: move firmware node to generic dtsi file
0e67c76384e9 firmware: turris-mox-rwtm: add marvell,armada-3700-rwtm-firmware compatible string
e58c162789be cifs: prevent NULL deref in cifs_compose_mount_options()
faa3e7da487a s390: introduce proper type handling call_on_stack() macro
be10fff3a461 s390/traps: do not test MONITOR CALL without CONFIG_BUG
9beba1469996 thermal/core/thermal_of: Stop zone device before unregistering it
7412c988fe12 perf/x86/intel/uncore: Clean up error handling path of iio mapping
892387e7619e sched/fair: Fix CFS bandwidth hrtimer expiry type
eb859b043c2e scsi: qedf: Add check to synchronize abort and flush
a4a54c54af25 scsi: libfc: Fix array index out of bound exception
0d7596a954f1 scsi: libsas: Add LUN number check in .slave_alloc callback
2f8df6332eb2 scsi: aic7xxx: Fix unintentional sign extension issue on left shift of u8
cdb995a6cbb5 rtc: max77686: Do not enforce (incorrect) interrupt trigger type
d3ba15fb0401 arch/arm64/boot/dts/marvell: fix NAND partitioning scheme
e378db118925 kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set
8c12a3a68d4f thermal/drivers/sprd: Add missing of_node_put for loop iteration
20babcd83092 thermal/drivers/imx_sc: Add missing of_node_put for loop iteration
469951ce4bb0 thermal/drivers/rcar_gen3_thermal: Do not shadow rcar_gen3_ths_tj_1
bd40e2da3ae5 thermal/core: Correct function name thermal_zone_device_unregister()
6c099d595fd7 arm64: dts: imx8mq: assign PCIe clocks
24c41aa9d01b arm64: dts: ls208xa: remove bus-num from dspi node
7e3f5739cccb firmware: tegra: bpmp: Fix Tegra234-only builds
7c03982fa134 soc/tegra: fuse: Fix Tegra234-only builds
ffa6f08be14a ARM: OMAP2+: Block suspend for am3 and am4 if PM is not configured
f40a7c9b8ee1 ARM: dts: stm32: fix stpmic node for stm32mp1 boards
2670d3d1ef47 ARM: dts: stm32: Rename spi-flash/mx66l51235l@N to flash@N on DHCOM SoM
26cd441c529d ARM: dts: stm32: Drop unused linux,wakeup from touchscreen node on DHCOM SoM
a5bc2a2d838e ARM: dts: stm32: fix the Odyssey SoM eMMC VQMMC supply
e27052f21a2f ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15
6a7af6347810 ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings
160c92d728f3 ARM: dts: rockchip: fix supply properties in io-domains nodes
d671fae04648 arm64: dts: juno: Update SCPI nodes as per the YAML schema
fc71d8df5807 ARM: dts: bcm283x: Fix up GPIO LED node names
4bc03e321f2a ARM: dts: bcm283x: Fix up MMC node names
15d727c044d5 firmware: arm_scmi: Fix the build when CONFIG_MAILBOX is not selected
b4009ea92f29 firmware: arm_scmi: Add SMCCC discovery dependency in Kconfig
41e2bcca23f1 memory: tegra: Fix compilation warnings on 64bit platforms
7ad965c8a723 ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings
ccec32f77144 ARM: dts: stm32: fix RCC node name on stm32f429 MCU
bfbc4b482078 ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards
34ec6702a2a1 ARM: dts: stm32: fix stm32mp157c-odyssey card detect pin
44f4e344f4f0 ARM: dts: stm32: Fix touchscreen node on dhcom-pdk2
3534a4b2d059 ARM: dts: stm32: Remove extra size-cells on dhcom-pdk2
8da771b5527c arm64: dts: qcom: sc7180: Move rmtfs memory region
a74d3bbe0553 ARM: tegra: nexus7: Correct 3v3 regulator GPIO of PM269 variant
e89f4098d528 ARM: tegra: wm8903: Fix polarity of headphones-detection GPIO in device-trees
c8815d6fee79 arm64: dts: ti: k3-am654x/j721e/j7200-common-proc-board: Fix MCU_RGMII1_TXC direction
28d2ae98154e ARM: dts: OMAP2+: Replace underscores in sub-mailbox node names
a73a22a69f6a ARM: dts: am335x: fix ti,no-reset-on-init flag for gpios
ddf2d14894d0 ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpios
a09b4c444941 ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios
3f0948569997 kbuild: sink stdout from cmd for silent build
27582c9fa294 rtc: mxc_v2: add missing MODULE_DEVICE_TABLE
6f5891a560df ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE value
5190a6604a10 ARM: dts: ux500: Fix orientation of accelerometer
61fda04276bb ARM: dts: ux500: Rename gpio-controller node
985947c53555 ARM: dts: ux500: Fix interrupt cells
ff9ef21bb6fb arm64: dts: rockchip: fix regulator-gpio states array
31e1b8c07d35 ARM: imx: pm-imx5: Fix references to imx5_cpu_suspend_info
d05ebeffca1d ARM: dts: imx6: phyFLEX: Fix UART hardware flow control
249d8e4ea168 ARM: dts: Hurricane 2: Fix NAND nodes names
f6541401dbd6 ARM: dts: BCM63xx: Fix NAND nodes names
b5fc6b9ab427 ARM: NSP: dts: fix NAND nodes names
5f844007eb91 ARM: Cygnus: dts: fix NAND nodes names
9525d58c5af8 ARM: brcmstb: dts: fix NAND nodes names
4e8eb51ae633 reset: ti-syscon: fix to_ti_syscon_reset_data macro
cabcb576fc3e arm64: dts: rockchip: Fix power-controller node names for rk3399
81ea23d988f9 arm64: dts: rockchip: Fix power-controller node names for rk3328
e4f97b740d6a arm64: dts: rockchip: Fix power-controller node names for px30
95b64be2e741 ARM: dts: rockchip: Fix power-controller node names for rk3288
5881af8d692b ARM: dts: rockchip: Fix power-controller node names for rk3188
70abb828312a ARM: dts: rockchip: Fix power-controller node names for rk3066a
fc01549d7b87 ARM: dts: rockchip: Fix IOMMU nodes properties on rk322x
55014c38e73d ARM: dts: rockchip: Fix the timer clocks order
2e1f681b680c arm64: dts: rockchip: fix pinctrl sleep nodename for rk3399.dtsi
7d3408c72336 ARM: dts: rockchip: fix pinctrl sleep nodename for rk3036-kylin and rk3288
e2d1e4416174 ARM: dts: rockchip: Fix thermal sensor cells o rk322x
c8f0cef75dd7 ARM: dts: gemini: add device_type on pci
191523dcfa68 ARM: dts: gemini: rename mdio to the right name
(From OE-Core rev: 73d94f33b328200fbf9655ab71381a27e6f55bf8)
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Poky
Poky is an integration of various components to form a pre-packaged build system and development environment which is used as a development and validation tool by the Yocto Project. It features support for building customised embedded style device images and custom containers. There are reference demo images ranging from X11/GTK+ to Weston, commandline and more. The system supports cross-architecture application development using QEMU emulation and a standalone toolchain and SDK suitable for IDE integration.
Additional information on the specifics of hardware that Poky supports is available in README.hardware. Further hardware support can easily be added in the form of BSP layers which extend the systems capabilities in a modular way. Many layers are available and can be found through the layer index.
As an integration layer Poky consists of several upstream projects such as BitBake, OpenEmbedded-Core, Yocto documentation, the 'meta-yocto' layer which has configuration and hardware support components. These components are all part of the Yocto Project and OpenEmbedded ecosystems.
The Yocto Project has extensive documentation about the system including a reference manual which can be found at https://docs.yoctoproject.org/
OpenEmbedded is the build architecture used by Poky and the Yocto project. For information about OpenEmbedded, see the OpenEmbedded website.
Contribution Guidelines
The project works using a mailing list patch submission process. Patches should be sent to the mailing list for the repository the components originate from (see below). Throughout the Yocto Project, the README files in the component in question should detail where to send patches, who the maintainers are and where bugs should be reported.
A guide to submitting patches to OpenEmbedded is available at:
http://www.openembedded.org/wiki/How_to_submit_a_patch_to_OpenEmbedded
There is good documentation on how to write/format patches at:
https://www.openembedded.org/wiki/Commit_Patch_Message_Guidelines
Where to Send Patches
As Poky is an integration repository (built using a tool called combo-layer), patches against the various components should be sent to their respective upstreams:
OpenEmbedded-Core (files in meta/, meta-selftest/, meta-skeleton/, scripts/):
- Git repository: https://git.openembedded.org/openembedded-core/
- Mailing list: openembedded-core@lists.openembedded.org
BitBake (files in bitbake/):
- Git repository: https://git.openembedded.org/bitbake/
- Mailing list: bitbake-devel@lists.openembedded.org
Documentation (files in documentation/):
- Git repository: https://git.yoctoproject.org/cgit/cgit.cgi/yocto-docs/
- Mailing list: docs@lists.yoctoproject.org
meta-yocto (files in meta-poky/, meta-yocto-bsp/):
- Git repository: http://git.yoctoproject.org/cgit/cgit.cgi/meta-yocto
- Mailing list: poky@lists.yoctoproject.org
If in doubt, check the openembedded-core git repository for the content you intend to modify as most files are from there unless clearly one of the above categories. Before sending, be sure the patches apply cleanly to the current git repository branch in question.