a3e1b785b6
Updating to the latest korg -stable release that comprises
the following commits:
3299fb36854f Linux 5.15.108
adef0cebea85 nvme-pci: avoid the deepest sleep state on ZHITAI TiPro5000 SSDs
c6897dfe2bb6 counter: Add the necessary colons and indents to the comments of counter_compi
fa934784fb65 counter: fix docum. build problems after filename change
0cf283340023 panic, kexec: make __crash_kexec() NMI safe
9e1e511119b1 kexec: turn all kexec_mutex acquisitions into trylocks
6fc7a53fcc4c nvme-pci: add NVME_QUIRK_BOGUS_NID for T-FORCE Z330 SSD
fa43e0591900 nvme-pci: mark Lexar NM760 as IGNORE_DEV_SUBNQN
a814fc9e6e59 nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM760
972e06d09e86 nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM610
cf773832139b nvme-pci: Crucial P2 has bogus namespace ids
5a19b9a49aea nvme-pci: avoid the deepest sleep state on ZHITAI TiPro7000 SSDs
65f5dc5dff29 nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG GAMMIX S50
3daaa5f7aae2 i2c: ocores: generate stop condition after timeout in polling mode
0af686415ca2 x86/rtc: Remove __init for runtime functions
b11ff3ef4d09 sched/fair: Fix imbalance overflow
90e3dc510106 sched/fair: Move calculate of avg_load to a better location
6d1353781bba powerpc/papr_scm: Update the NUMA distance table for the target node
0b031f5983f8 ubi: Fix deadlock caused by recursively holding work_sem
85d7a7044b75 ubi: Fix failure attaching when vid_hdr offset equals to (sub)page size
f0b4a4086cf2 mptcp: stricter state check in mptcp_worker
925e1a510a2e mptcp: use mptcp_schedule_work instead of open-coding it
f4f2a1d491e9 cgroup/cpuset: Wake up cpuset_attach_wq tasks in cpuset_cancel_attach()
19c7f9329bdb x86/PCI: Add quirk for AMD XHCI controller that loses MSI-X state in D3hot
05143d90ac90 scsi: ses: Handle enclosure with just a primary component gracefully
aaae6d303150 net: phy: nxp-c45-tja11xx: fix unsigned long multiplication overflow
b1ca14361d49 net: phy: nxp-c45-tja11xx: add remove callback
0359e505bcd7 net: sfp: initialize sfp->i2c_block_size at sfp allocation
a42f565c0e96 riscv: add icache flush for nommu sigreturn trampoline
6eeb1cba4c9d drm/i915: fix race condition UAF in i915_perf_add_config_ioctl
9b344cf6aea0 i915/perf: Replace DRM_DEBUG with driver specific drm_dbg call
6b337a13c144 tracing: Have tracing_snapshot_instance_cond() write errors to the appropriate instance
1403518ed0d9 tracing: Add trace_array_puts() to write into instance
670e54151b7a counter: 104-quad-8: Fix Synapse action reported for Index signals
6e25d374cd95 counter: Internalize sysfs interface code
c4153e662883 counter: stm32-timer-cnt: Provide defines for slave mode selection
4c1010848b12 counter: stm32-lptimer-cnt: Provide defines for clock polarities
189ada57e88c ACPI: resource: Add Medion S17413 to IRQ override quirk
248a18a895e2 wifi: iwlwifi: mvm: fix mvmtxq->stopped handling
0efd9ed92926 asymmetric_keys: log on fatal failures in PE/pkcs7
ae2b44aeade1 verify_pefile: relax wrapper length check
744f80ae0716 drm: panel-orientation-quirks: Add quirk for Lenovo Yoga Book X90F
05a24344296e efi: sysfb_efi: Add quirk for Lenovo Yoga Book X91F/L
0f9d2fc58824 i2c: hisi: Avoid redundant interrupts
d21a46212009 i2c: imx-lpi2c: clean rx/tx buffers upon new message
8451da304b4a wifi: mwifiex: mark OF related data as maybe unused
9aeff275b7f7 power: supply: cros_usbpd: reclassify "default case!" as debug
788f4a3d3987 ARM: 9290/1: uaccess: Fix KASAN false-positives
53967ac8080b libbpf: Fix single-line struct definition output in btf_dump
906a6689bb01 skbuff: Fix a race between coalescing and releasing SKBs
7ccc58a1a756 net: macb: fix a memory corruption in extended buffer descriptor mode
ed2ec39e46fe udp6: fix potential access to stale information
e97ff11b396c RDMA/core: Fix GID entry ref leak when create_ah fails
6109f5b13ce3 sctp: fix a potential overflow in sctp_ifwdtsn_skip
c6a796ee5a63 net: qrtr: Fix an uninit variable access bug in qrtr_tx_resume()
9b1ca43bcf3d qlcnic: check pci_reset_function result
ffa4f32952e2 drm/armada: Fix a potential double free in an error handling path
a94f5d35fdbb tcp: restrict net.ipv4.tcp_app_win
a08ec4ed3b6e niu: Fix missing unwind goto in niu_alloc_channels()
e35ae49bc198 9p/xen : Fix use after free bug in xen_9pfs_front_remove due to race condition
b41da67451b0 bpf: tcp: Use sock_gen_put instead of sock_put in bpf_iter_tcp
48e8e7851dc0 RDMA/cma: Allow UD qp_type to join multicast only
1569a4cdb973 IB/mlx5: Add support for 400G_8X lane speed
f6711bc5c016 RDMA/irdma: Add ipv4 check to irdma_find_listener()
c8c7a7aee861 RDMA/irdma: Increase iWARP CM default rexmit count
810250c9c661 RDMA/irdma: Fix memory leak of PBLE objects
aa2607bae45f clk: sprd: set max_register according to mapping range
0004a50c535f drm/i915/dsi: fix DSS CTL register offsets for TGL+
1bb4a52c3caa KVM: arm64: PMU: Restore the guest's EL0 event counting after migration
c7acce3a0eeb mtd: rawnand: stm32_fmc2: use timings.mode instead of checking tRC_min
7233b5baba10 mtd: rawnand: stm32_fmc2: remove unsupported EDO mode
5ded9b750f30 mtd: rawnand: meson: fix bitmask for length in command word
0162836a51bb mtdblock: tolerate corrected bit-flips
ad574345ce26 fbmem: Reject FB_ACTIVATE_KD_TEXT from userspace
a55a95365e08 btrfs: fix fast csum implementation detection
6da03c237d56 btrfs: print checksum type and implementation at mount time
0efb276d5848 Bluetooth: Fix race condition in hidp_session_thread
ac6725a634f7 Bluetooth: L2CAP: Fix use-after-free in l2cap_disconnect_{req,rsp}
d98498ad5695 ALSA: hda/sigmatel: fix S/PDIF out on Intel D*45* motherboards
c5797c87e74e ALSA: emu10k1: don't create old pass-through playback device on Audigy
f1ef453157b4 ALSA: firewire-tascam: add missing unwind goto in snd_tscm_stream_start_duplex()
7901d787e455 ALSA: i2c/cs8427: fix iec958 mixer control deactivation
d8697aa12ae6 ALSA: hda/sigmatel: add pin overrides for Intel DP45SG motherboard
34a0ada0a8b2 ALSA: emu10k1: fix capture interrupt handler unlinking
55e4eef5545d Revert "pinctrl: amd: Disable and mask interrupts on resume"
(From OE-Core rev: bbdea728c2e7f81660220ff0fd196c87886abacc)
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 5339d44b0b0b23f30cb0f8ab395da62e83733c40)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Poky
Poky is an integration of various components to form a pre-packaged build system and development environment which is used as a development and validation tool by the Yocto Project. It features support for building customised embedded style device images and custom containers. There are reference demo images ranging from X11/GTK+ to Weston, commandline and more. The system supports cross-architecture application development using QEMU emulation and a standalone toolchain and SDK suitable for IDE integration.
Additional information on the specifics of hardware that Poky supports is available in README.hardware. Further hardware support can easily be added in the form of BSP layers which extend the systems capabilities in a modular way. Many layers are available and can be found through the layer index.
As an integration layer Poky consists of several upstream projects such as BitBake, OpenEmbedded-Core, Yocto documentation, the 'meta-yocto' layer which has configuration and hardware support components. These components are all part of the Yocto Project and OpenEmbedded ecosystems.
The Yocto Project has extensive documentation about the system including a reference manual which can be found at https://docs.yoctoproject.org/
OpenEmbedded is the build architecture used by Poky and the Yocto project. For information about OpenEmbedded, see the OpenEmbedded website.
Contribution Guidelines
The project works using a mailing list patch submission process. Patches should be sent to the mailing list for the repository the components originate from (see below). Throughout the Yocto Project, the README files in the component in question should detail where to send patches, who the maintainers are and where bugs should be reported.
A guide to submitting patches to OpenEmbedded is available at:
https://www.openembedded.org/wiki/How_to_submit_a_patch_to_OpenEmbedded
There is good documentation on how to write/format patches at:
https://www.openembedded.org/wiki/Commit_Patch_Message_Guidelines
Where to Send Patches
As Poky is an integration repository (built using a tool called combo-layer), patches against the various components should be sent to their respective upstreams:
OpenEmbedded-Core (files in meta/, meta-selftest/, meta-skeleton/, scripts/):
- Git repository: https://git.openembedded.org/openembedded-core/
- Mailing list: openembedded-core@lists.openembedded.org
BitBake (files in bitbake/):
- Git repository: https://git.openembedded.org/bitbake/
- Mailing list: bitbake-devel@lists.openembedded.org
Documentation (files in documentation/):
- Git repository: https://git.yoctoproject.org/cgit/cgit.cgi/yocto-docs/
- Mailing list: docs@lists.yoctoproject.org
meta-yocto (files in meta-poky/, meta-yocto-bsp/):
- Git repository: https://git.yoctoproject.org/cgit/cgit.cgi/meta-yocto
- Mailing list: poky@lists.yoctoproject.org
If in doubt, check the openembedded-core git repository for the content you intend to modify as most files are from there unless clearly one of the above categories. Before sending, be sure the patches apply cleanly to the current git repository branch in question.