Updating to the korg -stable release 4.8.8. The short log change
summary follows:
61385cc1db42 Linux 4.8.8
8ed841d6c045 scsi: megaraid_sas: fix macro MEGASAS_IS_LOGICAL to avoid regression
32f60e9b621f scsi: megaraid_sas: Fix data integrity failure for JBOD (passthrough) devices
eb2ca7aac349 usb: dwc3: gadget: properly account queued requests
38db26fb3ae5 arch/powerpc: Update parameters for csum_tcpudp_magic & csum_tcpudp_nofold
a143c6022cef packet: on direct_xmit, limit tso and csum to supported devices
a6289d9ac3fe ip6_tunnel: Update skb->protocol to ETH_P_IPV6 in ip6_tnl_xmit()
c9e086b9009a sctp: validate chunk len before actually using it
5a37dce1b679 net sched filters: fix notification of filter delete with proper handle
d46b19687fec net: ipv6: Do not consider link state for nexthop validation
eb77db88ea11 macsec: Fix header length if SCI is added if explicitly disabled
027ab3b8ee5a netvsc: fix incorrect receive checksum offloading
b75edf27a6c3 udp: fix IP_CHECKSUM handling
5ee356021c42 sctp: fix the panic caused by route update
d90cbfaf5439 net: sctp, forbid negative length
64774617da37 net: fec: Call swap_buffer() prior to IP header alignment
c6c82c2b707e ipv4: use the right lock for ping_group_range
8418193f7052 ipv4: disable BH in set_ping_group_range()
23c110c4cdbc net: add recursion limit to GRO
d3bbd04b92fd net: core: Correctly iterate over lower adjacency list
fc5722f8f8f2 rtnetlink: Add rtnexthop offload flag to compare mask
4ac3ca8c2933 switchdev: Execute bridge ndos only for bridge ports
63d82a2cbd0c bridge: multicast: restore perm router ports on multicast enable
e9a5921c393f net: pktgen: remove rcu locking in pktgen_change_name()
2eeb5735dd04 net/mlx4_en: fixup xdp tx irq to match rx
27bb6e31d32d IB/ipoib: move back IB LL address into the hard header
f280126ec8d8 ipv6: correctly add local routes when lo goes up
0f3e77623916 ip6_tunnel: fix ip6_tnl_lookup
a148a818df84 net: phy: Trigger state machine on state change and not polling.
2a9099899a6a ipv6: tcp: restore IP6CB for pktoptions skbs
50b43ad1dce6 net_sched: reorder pernet ops and act ops registrations
dac04913ee27 drivers/ptp: Fix kernel memory disclosure
3f841d1555ad netlink: do not enter direct reclaim from netlink_dump()
5086cadf8fa4 packet: call fanout_release, while UNREGISTERING a netdev
6fff1319fdac net: Add netdev all_adj_list refcnt propagation to fix panic
9caee42c800e net/sched: act_vlan: Push skb->data to mac_header prior calling skb_vlan_*() functions
c002dfd8adaa net: pktgen: fix pkt_size
ff1b27c31706 net: fec: set mac address unconditionally
567aeca9fbb7 Linux 4.8.7
1bf121d3b234 HID: usbhid: add ATEN CS962 to list of quirky devices
05a833d4b051 cpufreq: intel_pstate: Set P-state upfront in performance mode
c89771511deb ubi: fastmap: Fix add_vol() return value test in ubi_attach_fastmap()
591bf1362e9e btrfs: qgroup: Prevent qgroup->reserved from going subzero
0c879624701d kvm: x86: Check memopp before dereference (CVE-2016-8630)
725a92be3926 ARM: fix oops when using older ARMv4T CPUs
e339609bf377 tty: vt, fix bogus division in csi_J
4a22930a74ac v4l: vsp1: Prevent pipelines from running when not streaming
59f9693a170a usb: musb: Fix hardirq-safe hardirq-unsafe lock order error
086ac9180437 usb: chipidea: host: fix NULL ptr dereference during shutdown
07bae478e1c1 usb: dwc3: Fix size used in dma_free_coherent()
fedede0963c4 pwm: Unexport children before chip removal
7b4b77b9566d omapfb: fix return value check in dsi_bind()
a3e55d6342b2 video: fbdev: pxafb: potential NULL dereference on error
13d0f5b3a399 uapi: add missing install of sync_file.h
db5025bd08ef UBI: fastmap: scrub PEB when bitflips are detected in a free PEB EC header
cc94524e8940 netfilter: xt_NFLOG: fix unexpected truncated packet
720a40113e78 i2c: mark device nodes only in case of successful instantiation
f7d8d44a68de drm: i915: Wait for fences on new fb, not old
1cefe4cb4f8c drm/i915/fbc: fix CFB size calculation for gen8+
809e9e6fc390 drm/i915: Clean up DDI DDC/AUX CH sanitation
ba0a959e0334 drm/i915: Respect alternate_aux_channel for all DDI ports
426a724c9972 drm: Release reference from blob lookup after replacing property
5064a6a05387 drm/dp/mst: Check peer device type before attempting EDID read
e6fcf953a995 drm/i915/gen9: fix watermarks when using the pipe scaler
0f7f9c456380 drm/i915/gen9: fix DDB partitioning for multi-screen cases
0cc98b5963f8 drm/fb-helper: Keep references for the current set of used connectors
14f4a463dc78 drm/fb-helper: Fix connector ref leak on error
6222f1e0b9ef drm/fb-helper: Don't call dirty callback for untouched clips
7290da41b8da drm/nouveau/acpi: fix check for power resources support
fd5f9e1e28cb drm/radeon: drop register readback in cayman_cp_int_cntl_setup
e136de5d7331 drm/radeon/si_dpm: workaround for SI kickers
fe777e7a595c drm/radeon/si_dpm: Limit clocks on HD86xx part
fa6227dbfd6a drm/imx: ipuv3-plane: Access old u/vbo properly in ->atomic_check for YU12/YV12
d040374f3473 drm/imx: ipuv3-plane: Switch EBA buffer only when we don't need modeset
51ed5a2bbf38 Revert "drm/radeon: fix DP link training issue with second 4K monitor"
ac6f210dd7a6 md: be careful not lot leak internal curr_resync value into metadata. -- (all)
eba4fe9db92f RAID10: ignore discard error
21faa6dbf53f RAID1: ignore discard error
b80fcd58e6f6 mmc: dw_mmc-pltfm: fix the potential NULL pointer dereference
1244d3c3a0f6 scsi: arcmsr: Send SYNCHRONIZE_CACHE command to firmware
2a1a0a6f1d60 scsi: scsi_debug: Fix memory leak if LBP enabled and module is unloaded
5bac49422b4a ath10k: cache calibration data when the core is stopped
a7d092e946f5 Revert "ath9k_hw: implement temperature compensation support for AR9003+"
aea7cb3b7ceb mac80211: discard multicast and 4-addr A-MSDUs
27fa1e735c70 firewire: net: fix fragmented datagram_size off-by-one
032430fb6a2c firewire: net: guard against rx buffer overflows
facb17b67ac9 Input: i8042 - add XMG C504 to keyboard reset table
8b535f07898a rtl8xxxu: Fix rtl8723bu driver reload issue
1c9edb27261e rtl8xxxu: Fix big-endian problem reporting mactime
ece1b51ae1c4 rtl8xxxu: Fix memory leak in handling rxdesc16 packets
5a805cd29284 dm raid: fix activation of existing raid4/10 devices
6e5456768ba1 dm raid: fix compat_features validation
056290446e8a dm rq: clear kworker_task if kthread_run() returned an error
13a59a868756 dm table: fix missing dm_put_target_type() in dm_table_add_target()
159a17e8dbf6 dm mirror: fix read error on recovery after default leg failure
d8db5234adef virtio: console: Unlock vqs while freeing buffers
7569d22a820d virtio_pci: Limit DMA mask to 44 bits for legacy virtio devices
0c2f67a6196d virtio_ring: Make interrupt suppression spec compliant
c528df925fba parisc: Ensure consistent state when switching to kernel stack at syscall entry
592de1000694 ovl: fsync after copy-up
3ad464dadb7c ovl: update S_ISGID when setting posix ACLs
be9015460ed5 ovl: fix get_acl() on tmpfs
2b632307635f MIPS: KASLR: Fix handling of NULL FDT
1734afcce32b nfsd: Fix general protection fault in release_lock_stateid()
202c6676b963 ARM: dts: fix the SD card on the Snowball
db20b510ca5c ARM: mvebu: Select corediv clk for all mvebu v7 SoC
c627b2e76ae2 KVM: MIPS: Precalculate MMIO load resume PC
f3a0c969e788 KVM: MIPS: Make ERET handle ERL before EXL
961cf133b710 KVM: s390: Fix STHYI buffer alignment for diag224
88aca01f8cb4 KVM: x86: fix wbinvd_dirty_mask use-after-free
ea261d177aed dm: free io_barrier after blk_cleanup_queue call
377a2a273c4b Staging: wilc1000: Fix kernel Oops on opening the device
0c4ffbf9e118 iio:chemical:atlas-ph-sensor: Fix use of 32 bit int to hold 16 bit big endian value
52a1e76f16e2 arm64: dts: marvell: fix clocksource for CP110 master SPI0
0dff3c6321a5 tty: limit terminal size to 4M chars
44f0722dc9ac xhci: workaround for hosts missing CAS bit
0894224ae7c0 xhci: add restart quirk for Intel Wildcatpoint PCH
b2d28d93cf83 hv: do not lose pending heartbeat vmbus packets
eeae0a12a166 vt: clear selection before resizing
9710f5b19328 x86/smpboot: Init apic mapping before usage
58b0a7f115f8 GenWQE: Fix bad page access during abort of resource allocation
b9aa0a7290f5 usb: increase ohci watchdog delay to 275 msec
241208e7b721 usb: renesas_usbhs: add wait after initialization for R-Car Gen3
00dbeb06292b xhci: use default USB_RESUME_TIMEOUT when resuming ports.
1e306cd37a66 USB: serial: ftdi_sio: add support for Infineon TriBoard TC2X7
d082fd105eb9 USB: serial: cp210x: fix tiocmget error handling
e8bf726705bd USB: serial: fix potential NULL-dereference at probe
23124735a6f0 usb: gadget: function: u_ether: don't starve tx request queue
fe4af125085a usb: gadget: udc: atmel: fix endpoint name
420d16894425 mei: txe: don't clean an unprocessed interrupt cause.
5d30e8f65073 ubifs: Fix regression in ubifs_readdir()
b8176cc56bf1 ubifs: Abort readdir upon error
1755f43e9a90 timers: Lock base for same bucket optimization
e18ed431d7da timers: Plug locking race vs. timer migration
b5e3a038997a timers: Prevent base clock corruption when forwarding
665f7bf33aa8 timers: Prevent base clock rewind when forwarding clock
0d621c57e739 x86/microcode/AMD: Fix more fallout from CONFIG_RANDOMIZE_MEMORY=y
e599203f55ad powerpc/64: Fix race condition in setting lock bit in idle/wakeup code
51d784b54768 powerpc/64: Re-fix race condition between going idle and entering guest
2c7ff0e5c311 powerpc/mm/radix: Use tlbiel only if we ever ran on the current cpu
ae150de2d5e0 powerpc: Convert cmp to cmpd in idle enter sequence
1198fbca645e btrfs: fix races on root_log_ctx lists
bc720ae2ffab cxl: Fix leaking pid refs in some error paths
2a997e83960b ANDROID: binder: Clear binder and cookie when setting handle in flat binder struct
599cfd58ffde ANDROID: binder: Add strong ref checks
2a0efa30b15c ALSA: hda - Fix headset mic detection problem for two Dell laptops
2585e17b71c7 ALSA: hda - Fix surround output pins for ASRock B150M mobo
14456570a4a5 ALSA: hda - Adding a new group of pin cfg into ALC295 pin quirk table
54186c7dd2ec ALSA: hda - allow 40 bit DMA mask for NVidia devices
0f574c90d747 ALSA: seq: Fix time account regression
8ccf154b2654 ALSA: usb-audio: Add quirk for Syntek STK1160
9d3f5b85ef8b device-dax: fix percpu_ref_exit ordering
33bcff297228 security/keys: make BIG_KEYS dependent on stdrng.
5152986c9257 KEYS: Sort out big_key initialisation
5daa841d0437 KEYS: Fix short sprintf buffer in /proc/keys show function
0a38e6c551c4 thermal/powerclamp: correct cpu support check
5db5e0c11c13 mm: memcontrol: do not recurse in direct reclaim
68adb469dd3b mm/slab: fix kmemcg cache creation delayed issue
67ae004e2c52 mm/list_lru.c: avoid error-path NULL pointer deref
5cb73199ca48 libxfs: clean up _calc_dquots_per_chunk
d00057ecf82f gpio: GPIO_GET_LINE{HANDLE,EVENT}_IOCTL: Fix file descriptor leak
c70eb2cc1276 gpio: GPIOHANDLE_GET_LINE_VALUES_IOCTL: Fix another information leak
6bba4b226521 gpio: GPIO_GET_LINEEVENT_IOCTL: Reject invalid line and event flags
e2144827d96b gpio: GPIO_GET_LINEHANDLE_IOCTL: Reject invalid line flags
c0699405b147 gpio: GPIO_GET_LINEEVENT_IOCTL: Validate line offset
49bdfb21e37d gpio: GPIOHANDLE_GET_LINE_VALUES_IOCTL: Fix information leak
e22edf53b40f gpio: GPIO_GET_LINEHANDLE_IOCTL: Validate line offset
a23a59c56a53 gpio: GPIO_GET_CHIPINFO_IOCTL: Fix information leak
78ae767553e4 gpio: GPIO_GET_CHIPINFO_IOCTL: Fix line offset validation
56ffab4f532e gpio / ACPI: fix returned error from acpi_dev_gpio_irq_get()
4366246129ca h8300: fix syscall restarting
a639266ae0c3 spi: mark device nodes only in case of successful instantiation
d6634d871199 spi: fsl-espi: avoid processing uninitalized data on error
0cee66b72acc drm/dp/mst: Clear port->pdt when tearing down the i2c adapter
f2ffb21fb495 i2c: core: fix NULL pointer dereference under race condition
0fda1cdcbb72 i2c: xgene: Avoid dma_buffer overrun
9c619c2a8d4d i2c: rk3x: Give the tuning value 0 during rk3x_i2c_v0_calc_timings
(From OE-Core rev: f95903012735e764ae0608a17fc6d4d8c139eb83)
(From OE-Core rev: 02cbbeb726923df8122d5e30a1908a0897e8cd6c)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Poky
Poky is an integration of various components to form a complete prepackaged build system and development environment. It features support for building customised embedded device style images. There are reference demo images featuring a X11/Matchbox/GTK themed UI called Sato. The system supports cross-architecture application development using QEMU emulation and a standalone toolchain and SDK with IDE integration.
Additional information on the specifics of hardware that Poky supports is available in README.hardware. Further hardware support can easily be added in the form of layers which extend the systems capabilities in a modular way.
As an integration layer Poky consists of several upstream projects such as BitBake, OpenEmbedded-Core, Yocto documentation and various sources of information e.g. for the hardware support. Poky is in turn a component of the Yocto Project.
The Yocto Project has extensive documentation about the system including a reference manual which can be found at: http://yoctoproject.org/documentation
OpenEmbedded-Core is a layer containing the core metadata for current versions of OpenEmbedded. It is distro-less (can build a functional image with DISTRO = "nodistro") and contains only emulated machine support.
For information about OpenEmbedded, see the OpenEmbedded website: http://www.openembedded.org/
Where to Send Patches
As Poky is an integration repository (built using a tool called combo-layer), patches against the various components should be sent to their respective upstreams:
bitbake: Git repository: http://git.openembedded.org/bitbake/ Mailing list: bitbake-devel@lists.openembedded.org
documentation: Git repository: http://git.yoctoproject.org/cgit/cgit.cgi/yocto-docs/ Mailing list: yocto@yoctoproject.org
meta-poky, meta-yocto-bsp: Git repository: http://git.yoctoproject.org/cgit/cgit.cgi/meta-yocto(-bsp) Mailing list: poky@yoctoproject.org
Everything else should be sent to the OpenEmbedded Core mailing list. If in doubt, check the oe-core git repository for the content you intend to modify. Before sending, be sure the patches apply cleanly to the current oe-core git repository.
Git repository: http://git.openembedded.org/openembedded-core/
Mailing list: openembedded-core@lists.openembedded.org
Note: The scripts directory should be treated with extra care as it is a mix of oe-core and poky-specific files.