poky/meta/recipes-devtools/installer/adt-installer/scripts/adt_installer_internal

#!/bin/bash

Yocto ADT Installer

Copyright 2010-2011 by Intel Corp.

Permission is hereby granted, free of charge, to any person obtaining a copy

of this software and associated documentation files (the "Software"), to deal

in the Software without restriction, including without limitation the rights

to use, copy, modify, merge, publish, distribute, sublicense, and/or sell

copies of the Software, and to permit persons to whom the Software is

furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in

all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE

AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER

LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,

OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN

THE SOFTWARE.

parse_config() { INST_ARCH=uname -m

case $INST_ARCH in i[3-6]86) OPKG_CONFIG_FILE=$YOCTOADT_OPKG_CONF_FILE_32 OECORE_NATIVE_SYSROOT="$INSTALL_FOLDER/sysroots/$INST_ARCH$SDK_VENDOR-linux/" ;; x86_64) OPKG_CONFIG_FILE=$YOCTOADT_OPKG_CONF_FILE_64 OECORE_NATIVE_SYSROOT="$INSTALL_FOLDER/sysroots/x86_64$SDK_VENDOR-linux/" ;; *) echo_info "[ADT_INST] Error: Installation Machine is not supported!" exit -1 ;; esac }

get_sudo_app() { username=$(id -nu)

find the owner of the parent

dir=$1 while [ 1 ]; do if [ -d $dir ]; then owner=$(stat -c %U $dir) break else dir=$(dirname $dir) fi done

if [ "$owner" = "$username" ]; then true else echo sudo fi }

#let us install a qemu-native firstly #installation step 2 install_native_sdk() {

echo_info "\nStart installing selected native ADT for archs: $YOCTOADT_TARGETS..."

where the packages are installed.

NATIVE_INSTALL_DIR=$INSTALL_FOLDER

if [ -d "$INSTALL_FOLDER" ]; then echo_info "\nNative ADT installation directory "$INSTALL_FOLDER" already exists! Continue installation will override its contents!" confirm_install $1 fi

#Now begin to install native sdk and extract qemu rootfs which needs privilege rights #depending on the install location SUDO=$(get_sudo_app $NATIVE_INSTALL_DIR) if [ -n "$SUDO" ]; then echo_info "#######################################################################" echo_info "Please note from this point on installation requires sudo password ..." echo_info "#######################################################################" fi

#we need to make this directory firstly since opkg need to use it. OPKG_LOCK_DIR="$NATIVE_INSTALL_DIR/$OPKG_LIBDIR/opkg" if [ ! -d "$OPKG_LOCK_DIR" ]; then $SUDO mkdir -p $OPKG_LOCK_DIR echo_info "Successfully create directory $OPKG_LOCK_DIR. " #if user delete /opt/xxx, while dangling folders there, report error elif [ ! -d "$INSTALL_FOLDER" ]; then echo_info "\nDangling opkg cache folder $OPKG_LOCK_DIR detected. Continue installation will remove the folder!" confirm_install $1 $SUDO rm -rf $OPKG_LOCK_DIR $SUDO mkdir -p $OPKG_LOCK_DIR #if user are updating installing, just let him/her go, give her/him prompt else echo_info "ADT has already been installed. Will update its contents..." fi

#first update repository if [ "x$SUDO" = "x" ]; then OPKG_CMD="$LOCAL_OPKG_LOC/bin/opkg-cl" else OPKG_CMD="sudo -E $LOCAL_OPKG_LOC/bin/opkg-cl" fi

echo_info "Updating opkg..." $OPKG_CMD -f $OPKG_CONFIG_FILE -o $NATIVE_INSTALL_DIR update &>> $YOCTOADT_INSTALL_LOG_FILE echo_info "opkg update process ended..." check_result

#install below must sdk-host packages OPKG_INSTALL_CMD="$OPKG_CMD " OPKG_INSTALL_NATIVE_CMD="$OPKG_INSTALL_CMD --force-overwrite -f $OPKG_CONFIG_FILE -o $NATIVE_INSTALL_DIR install"

BASE_HOSTSDK_PKGNAMES="pseudo opkg pkgconfig libtool autoconf automake" for pkg in $BASE_HOSTSDK_PKGNAMES; do echo_info "Installing ${pkg} nativesdk ...\n" $OPKG_INSTALL_NATIVE_CMD nativesdk-${pkg} &>> $YOCTOADT_INSTALL_LOG_FILE check_result done

for target_type in $YOCTOADT_TARGETS; do machine_var="$YOCTOADT_TARGET_MACHINE_$target_type" machine=eval echo $machine_var echo_info "Installing cross canadian packages for $machine ..." $OPKG_INSTALL_NATIVE_CMD packagegroup-cross-canadian-$machine &>> $YOCTOADT_INSTALL_LOG_FILE check_result done

if [ "$YOCTOADT_QEMU" == "Y" ] || [ "$YOCTOADT_QEMU" = "y" ]; then echo_info "\nInstalling qemu native ..." $OPKG_INSTALL_NATIVE_CMD nativesdk-qemu &>> $YOCTOADT_INSTALL_LOG_FILE check_result $OPKG_INSTALL_NATIVE_CMD nativesdk-qemu-helper &>> $YOCTOADT_INSTALL_LOG_FILE check_result fi

if [ "$YOCTOADT_NFS_UTIL" == "Y" ] || [ "$YOCTOADT_NFS_UTIL" == "y" ]; then echo_info "\nInstalling unfs ..." $OPKG_INSTALL_NATIVE_CMD nativesdk-unfs-server &>> $YOCTOADT_INSTALL_LOG_FILE check_result fi

Lose the ./opt/${DISTRO}/${SDK_VERSION} part, we don't really need to keep

the entire directory structure. We could patch opkg to do that but it's far

simpler to do that here and achieve the same result.

This is done in two steps:

if [ -d $NATIVE_INSTALL_DIR/$DEFAULT_INSTALL_FOLDER ]; then # Step 1: copy ./opt/${DISTRO}/${SDK_VERSION} contents to $NATIVE_INSTALL_DIR. # We cannot use move if $NATIVE_INSTALL_DIR is not empty (for example: contains # another SDK) $SUDO cp -r $NATIVE_INSTALL_DIR/$DEFAULT_INSTALL_FOLDER/* $NATIVE_INSTALL_DIR

# delete the source directory now
$SUDO rm -rf $NATIVE_INSTALL_DIR/$DEFAULT_INSTALL_FOLDER/*

# Step 2: Delete the ./opt/${DISTRO}/${SDK_VERSION} directories too, they should be empty
dir=$NATIVE_INSTALL_DIR/$DEFAULT_INSTALL_FOLDER
while [ "$dir" != "$NATIVE_INSTALL_DIR" ]; do
    # if the user chose / as the install folder, then we should leave /opt in place
    if [ "$dir" = "/opt" ]; then
        break
    fi

    # try to delete the directory, only if it's empty
    $SUDO rmdir $dir
    if [ $? -ne 0 ]; then
        break
    fi

    # go to the next directory
    dir=$(dirname $dir)
done

fi

Link the ld.so.cache file into the hosts filesystem

if [ ! -f "$OECORE_NATIVE_SYSROOT/etc/ld.so.cache" ]; then echo_info "Link the ld.so.cache file into the host filesystem" $SUDO ln -s /etc/ld.so.cache $OECORE_NATIVE_SYSROOT/etc/ld.so.cache check_result fi

relocate binaries

echo_info "\nRelocating binaries ..." escaped_sdkpath=$(echo $DEFAULT_INSTALL_FOLDER |sed -e "s:[+.]:\\\\\0:g")

We don't change the script in-place since we may want the user to re-run

adt-installer script

sed -e "s:##DEFAULT_INSTALL_DIR##:$escaped_sdkpath:" scripts/relocate_sdk.py > scripts/relocate_sdk_tmp.py chmod +x scripts/relocate_sdk_tmp.py

dl_path=$(find $OECORE_NATIVE_SYSROOT/lib -name "ld-linux*") executable_files=$(find $OECORE_NATIVE_SYSROOT -type f -perm /111)

$SUDO scripts/relocate_sdk_tmp.py $INSTALL_FOLDER $dl_path $executable_files check_result

replace /opt/${DISTRO}/${SDK_VERSION} with the install folder in all configs

env_setup_script=$(find $NATIVE_INSTALL_DIR/ -name "environment-setup-*") $SUDO sed -i -e "s:$DEFAULT_INSTALL_FOLDER:$NATIVE_INSTALL_DIR:g" $env_setup_script

find $OECORE_NATIVE_SYSROOT -type f -exec file '{}' ; | grep ":.*(ASCII|script|source).*text" |
cut -d':' -f1 | xargs $SUDO sed -i -e "s:$DEFAULT_INSTALL_FOLDER:$NATIVE_INSTALL_DIR:g"

change all symlinks pointing to /opt/${DISTRO}/${SDK_VERSION}

for l in $(find $NATIVE_INSTALL_DIR -type l); do $SUDO ln -sfn $(readlink $l|sed -e "s:$DEFAULT_INSTALL_FOLDER:$NATIVE_INSTALL_DIR:") $l done

find out all perl scripts in $OECORE_NATIVE_SYSROOT and modify them

replacing the host perl with SDK perl.

for perl_script in $($SUDO grep -m 1 "^#!.*perl" -rl $OECORE_NATIVE_SYSROOT); do $SUDO sed -i -e "s:^#! /usr/bin/perl.:#! /usr/bin/env perl:g" -e
"s: /usr/bin/perl: /usr/bin/env perl:g" $perl_script done

echo_info "\nSuccessfully installed selected native ADT!" }

#Need three input params, $1 -- arch_type(arm powerpc x86 mips) #2 -- user installation type #customer or scilent

install_target() {

rootfs extraction directory

target_sysroot_var="$YOCTOADT_TARGET_SYSROOT_LOC_$1" target_sysroot=eval echo $target_sysroot_var

if [ "$target_sysroot" == "" ]; then return 0 else target_sysroot=readlink -m $target_sysroot fi

target_sysroot_image_var="$YOCTOADT_TARGET_SYSROOT_IMAGE_$1" target_sysroot_image=eval echo $target_sysroot_image_var if [ "$target_sysroot_image" == "" ]; then echo_info "[ADT_INST] Error: YOCTOADT_TARGET_SYSROOT_IMAGE_$1 selection is empty, failed to create target sysroot!" return 1 fi

echo_info "Installing target sysroot for arch: $1, rootfs type: $target_sysroot_image, location: $target_sysroot"

target_machine_var="$YOCTOADT_TARGET_MACHINE_$1" target_machine=eval echo $target_machine_var sysroot_image_name="core-image-$target_sysroot_image-$target_machine.tar.bz2" #echo_info "Extracting rootfs: $sysroot_image_name, using pseudo..."

sudo password might be needed to install the target sysroot

SUDO=$(get_sudo_app $target_sysroot)

$SUDO scripts/extract_rootfs $sysroot_image_name $target_sysroot $OECORE_NATIVE_SYSROOT $user_inst_type check_result

echo_info "Updating environment script with target sysroot location." if [ "$1" == "x86" ]; then env_filename=ls $INSTALL_FOLDER/environment-setup-i586* else env_filename=ls $INSTALL_FOLDER/environment-setup-$1* fi

if [ ! -z "$env_filename" ]; then SUDO=$(get_sudo_app $INSTALL_FOLDER) $SUDO sed -i -e "s%##SDKTARGETSYSROOT##%$target_sysroot%g" $env_filename else echo_info "[ADT_INST] Error: Failed to find environment script for arch: $1" return 1 fi

}

#Main part . scripts/data_define . scripts/util

parse_config

#secondly we will start to install native tools user_inst_type=$1 install_native_sdk $user_inst_type check_result

for arch_type in $YOCTOADT_SUPPORTED_TARGETS; do install_target $arch_type check_result done