Updating to the latest korg -stable release that comprises
the following commits:
0102425ac76b Linux 6.1.24
77e41187a387 bpftool: Print newline before '}' for struct with padding only fields
1c87a6f82a4e mm: enable maple tree RCU mode by default.
9b6627bc36aa maple_tree: add RCU lock checking to rcu callback functions
a29025a1b61c maple_tree: add smp_rmb() to dead node detection
d3af5f8a50dd maple_tree: remove extra smp_wmb() from mas_dead_leaves()
cc2f2507f3f0 maple_tree: fix freeing of nodes in rcu mode
5f7c59126498 maple_tree: detect dead nodes in mas_start()
3825e4495bcc maple_tree: refine ma_state init from mas_start()
64cb480523b4 maple_tree: be more cautious about dead nodes
0a0372d1d234 maple_tree: fix mas_prev() and mas_find() state handling
19d8f782e380 maple_tree: fix handle of invalidated state in mas_wr_store_setup()
2c9bc4903b96 maple_tree: reduce user error potential
f41e9e69277b maple_tree: fix potential rcu issue
edc5a4e880fa maple_tree: remove GFP_ZERO from kmem_cache_alloc() and kmem_cache_alloc_bulk()
0b73b8ac30c3 mm: take a page reference when removing device exclusive entries
726825297dd6 drm/i915: Split icl_color_commit_noarm() from skl_color_commit_noarm()
64244a900ddf drm/i915: Use _MMIO_PIPE() for SKL_BOTTOM_COLOR
0a3e21976517 drm/bridge: lt9611: Fix PLL being unable to lock
1297278ce239 drm/i915/dp_mst: Fix payload removal during output disabling
0c64d72fd3f2 drm/display/dp_mst: Handle old/new payload states in drm_dp_remove_payload()
62de38c8201d drm/amdgpu: skip psp suspend for IMU enabled ASICs mode2 reset
73ca74fc7ab6 drm/amdgpu: for S0ix, skip SDMA 5.x+ suspend/resume
245525543f48 drm/amd/display: Clear MST topology if it fails to resume
414207ff47d1 blk-throttle: Fix that bps of child could exceed bps limited in parent
240bb94f3510 maple_tree: fix a potential concurrency bug in RCU mode
4f5760757fa2 maple_tree: fix get wrong data_end in mtree_lookup_walk()
f042ee354c82 mm/hugetlb: fix uffd wr-protection for CoW optimization path
85cc118ce6f1 mm/swap: fix swap_info_struct race between swapoff and get_swap_pages()
3663f5d5bb1f ring-buffer: Fix race while reader and writer are on the same page
240b15027088 drm/i915: fix race condition UAF in i915_perf_add_config_ioctl
4e29fb89f771 drm/i915: Fix context runtime accounting
e53d28a6df0e drm/nouveau/disp: Support more modes by checking with lower bpc
3c260efd82f5 drm/panfrost: Fix the panfrost_mmu_map_fault_addr() error path
b4b37727bc78 ublk: read any SQE values upfront
94dd3a274bf5 wifi: mt76: ignore key disable commands
ef6bd8f64ce0 mm: vmalloc: avoid warn_alloc noise caused by fatal signal
0d33aa43516a zsmalloc: document freeable stats
dc48648699c7 tracing/synthetic: Make lastcmd_mutex static
14d34eb9b076 ASoC: hdac_hdmi: use set_stream() instead of set_tdm_slots()
c0cf0f55be04 tracing: Free error logs of tracing instances
1ea5f8d1facd tracing/osnoise: Fix notify new tracing_max_latency
162e6e6ff25f tracing/timerlat: Notify new max thread latency
9fe183f659a2 tracing/synthetic: Fix races on freeing last_cmd
101e8e6bbae5 net: stmmac: Add queue reset into stmmac_xdp_open() function
106e64a2e6a5 ACPI: video: Add acpi_backlight=video quirk for Lenovo ThinkPad W530
1c2842a7fdac ACPI: video: Add acpi_backlight=video quirk for Apple iMac14,1 and iMac14,2
9610adf8b2c8 ACPI: video: Make acpi_backlight=video work independent from GPU driver
be12e390c246 ACPI: video: Add auto_detect arg to __acpi_video_get_backlight_type()
b14abd688714 can: isotp: isotp_recvmsg(): use sock_recv_cmsgs() to get SOCK_RXQ_OVFL infos
f0bfe06c5569 can: isotp: isotp_ops: fix poll() to not report false EPOLLOUT events
db3f6340a7eb can: isotp: fix race between isotp_sendsmg() and isotp_release()
4c3fb22a6ec6 can: j1939: j1939_tp_tx_dat_new(): fix out-of-bounds memory access
ddca03d97daa fs: drop peer group ids under namespace lock
3caa69378107 ftrace: Fix issue that 'direct->addr' not restored in modify_ftrace_direct()
68973c84ea23 ftrace: Mark get_lock_parent_ip() __always_inline
023036e38923 perf/core: Fix the same task check in perf_event_set_output
a2eb778aacea block: don't set GD_NEED_PART_SCAN if scan partition failed
231a49460ac0 block: ublk: make sure that block size is set correctly
fb9ec305e764 cifs: sanitize paths in cifs_update_super_prepath.
012c045d6128 nvme: fix discard support without oncs
6e06a68fbbfc scsi: iscsi_tcp: Check that sock is valid before iscsi_set_param()
44374911ac63 scsi: qla2xxx: Fix memory leak in qla2x00_probe_one()
ac48787f58d1 io_uring: fix memory leak when removing provided buffers
bd4081fa1cd9 io_uring: fix return value when removing provided buffers
9f03d09b090c iio: adc: ad7791: fix IRQ flags
9c8fb43419a9 blk-mq: directly poll requests
5a62d771e514 counter: 104-quad-8: Fix Synapse action reported for Index signals
6284b686c276 counter: 104-quad-8: Fix race condition between FLAG and CNTR reads
e3d2f71fbf09 coresight-etm4: Fix for() loop drvdata->nr_addr_cmp range bug
13ec3c238f4b coresight: etm4x: Do not access TRCIDR1 for identification
54df8e39ce25 mm: kfence: fix handling discontiguous page
476699a8a739 mm: kfence: fix PG_slab and memcg_data clearing
dc54e4ea3190 KVM: nVMX: Do not report error code when synthesizing VM-Exit from Real Mode
5f35a72fcc8b KVM: x86: Clear "has_error_code", not "error_code", for RM exception injection
da429cddabe0 x86/ACPI/boot: Use FADT version to check support for online capable
29e8d76446e8 x86/acpi/boot: Correct acpi_is_processor_usable() check
cc53c92b7c96 ALSA: hda/realtek: fix mute/micmute LEDs for a HP ProBook
f66a18f8915c ALSA: hda/realtek: Add quirk for Clevo X370SNW
a8334a0c535d ksmbd: fix slab-out-of-bounds in init_smb2_rsp_hdr
c1f461ed5d24 ksmbd: do not call kvmalloc() with __GFP_NORETRY | __GFP_NO_WARN
e736180eaf03 serial: 8250: Prevent starting up DMA Rx on THRI interrupt
4230a94cbe37 dt-bindings: serial: renesas,scif: Fix 4th IRQ for 4-IRQ SCIFs
1942ccb7d95f nilfs2: fix sysfs interface lifetime
bae009a2f1b7 nilfs2: fix potential UAF of struct nilfs_sc_info in nilfs_segctor_thread()
b347d5474225 tty: serial: fsl_lpuart: avoid checking for transfer complete when UARTCTRL_SBK is asserted in lpuart32_tx_empty
0fd57dd7a79d tty: serial: sh-sci: Fix Rx on RZ/G2L SCI
2a6dd54da5de tty: serial: sh-sci: Fix transmit end interrupt handler
85c3acbeef41 iio: light: cm32181: Unregister second I2C client if present
9ba3466e6336 iio: buffer: make sure O_NONBLOCK is respected
1658d973b2f8 iio: buffer: correctly return bytes written in output buffers
59d667d7ae46 iio: dac: cio-dac: Fix max DAC write value check for 12-bit
c723a410a497 iio: adc: ti-ads7950: Set `can_sleep` flag for GPIO chip
a09eb53a18f9 iio: adc: qcom-spmi-adc5: Fix the channel name
a876adf4ad6d iio: adis16480: select CONFIG_CRC32
b3ea2426cc22 drivers: iio: adc: ltc2497: fix LSB shift
2fc866050751 USB: serial: option: add Quectel RM500U-CN modem
f91b9490a72c USB: serial: option: add Telit FE990 compositions
9339f4b67417 usb: typec: altmodes/displayport: Fix configure initial pin assignment
f2dc47de2874 USB: serial: cp210x: add Silicon Labs IFS-USB-DATACABLE IDs
0105bcb9e555 usb: dwc3: pci: add support for the Intel Meteor Lake-S
095eb65bba30 usb: cdnsp: Fixes error: uninitialized symbol 'len'
167c05646f67 xhci: also avoid the XHCI_ZERO_64B_REGS quirk with a passthrough iommu
745dbe21daf7 xhci: Free the command allocated for setting LPM if we return early
130c61c516cd usb: xhci: tegra: fix sleep in atomic call
2a0e0f4773fe PCI/DOE: Fix memory leak with CONFIG_DEBUG_OBJECTS=y
87f2d92fc892 PCI/DOE: Silence WARN splat with CONFIG_DEBUG_OBJECTS=y
5f625160b67f cxl/pci: Handle excessive CDAT length
0d8dc8993a8d cxl/pci: Handle truncated CDAT entries
ff7edd1ac643 cxl/pci: Handle truncated CDAT header
021544721f49 cxl/pci: Fix CDAT retrieval on big endian
435a319e3cc1 net: stmmac: check fwnode for phy device before scanning for phy
70f1913824fd arm64: compat: Work around uninitialized variable warning
332e7f93f112 gve: Secure enough bytes in the first TX desc for all TCP pkts
e3bcf2a77060 netlink: annotate lockless accesses to nlk->max_recvmsg_len
23a4bc3a2cec ethtool: reset #lanes when lanes is omitted
5a08a32e6249 ping: Fix potentail NULL deref for /proc/net/icmp.
b34056bedf04 raw: Fix NULL deref in raw_get_next().
53a0031217c9 raw: use net_hash_mix() in hash function
73b99db789ef ice: Reset FDIR counter in FDIR init stage
aad3b871efe2 ice: fix wrong fallback logic for FDIR
6460fee86abf NFSD: callback request does not use correct credential for AUTH_SYS
94ef35dd2ea1 sunrpc: only free unix grouplist after RCU settles
710392fd6546 net: stmmac: fix up RX flow hash indirection table when setting channels
b29e7b24de18 net: ethernet: ti: am65-cpsw: Fix mdio cleanup in probe
c35f0a48fbd0 gpio: davinci: Add irq chip flag to skip set wake
8309ca6f09b2 gpio: davinci: Do not clear the bank intr enable bit in save_context
73e863aa2505 platform/x86: think-lmi: Clean up display of current_value on Thinkstation
081da7b1c881 platform/x86: think-lmi: Fix memory leaks when parsing ThinkStation WMI strings
9071525bfcb1 platform/x86: think-lmi: Fix memory leak when showing current settings
2c9cefc142c1 ipv6: Fix an uninit variable access bug in __ip6_make_skb()
ef5fa4de4cac net: qrtr: Do not do DEL_SERVER broadcast after DEL_CLIENT
d2128636b303 sctp: check send stream number after wait_for_sndbuf
90c29c00b156 net: dsa: mv88e6xxx: Reset mv88e6393x force WD event bit
e48e6a4652c5 net: don't let netpoll invoke NAPI if in xmit context
8354db058092 ALSA: hda/hdmi: Preserve the previous PCM device upon re-enablement
0185e87c69af icmp: guard against too small mtu
b623a8e5d38a nfsd: call op_release, even when op_func returns an error
ffcbcf087581 NFSD: Avoid calling OPDESC() with ops->opnum == OP_ILLEGAL
0d2a6a508b9f wifi: brcmfmac: Fix SDIO suspend/resume regression
0f638a3d1b61 l2tp: generate correct module alias strings
c951c392a9d8 net: stmmac: remove redundant fixup to support fixed-link mode
1aca718e1a84 net: stmmac: check if MAC needs to attach to a PHY
2b15feabc95b net: phylink: add phylink_expects_phy() method
aa95efa187b4 net: qrtr: Fix a refcount bug in qrtr_recvmsg()
022c8320d9eb wifi: mac80211: fix invalid drv_sta_pre_rcu_remove calls for non-uploaded sta
c46239e6295c wifi: mac80211: fix the size calculation of ieee80211_ie_len_eht_cap()
1d797b152ca3 KVM: s390: pv: fix external interruption loop not always detected
84f940586845 ASoC: codecs: lpass: fix the order or clks turn off during suspend
6f62d2d396f1 pwm: meson: Explicitly set .polarity in .get_state()
c6af1a3ae767 pwm: sprd: Explicitly set .polarity in .get_state()
116a17f97764 pwm: iqs620a: Explicitly set .polarity in .get_state()
8a3a6a0aca8c pwm: cros-ec: Explicitly set .polarity in .get_state()
98ba763cc91c pwm: hibvt: Explicitly set .polarity in .get_state()
547cc8dae247 pwm: Make .get_state() callback return an error code
eafd3967b9e7 ASoC: SOF: ipc4: Ensure DSP is in D0I0 during sof_ipc4_set_get_data()
8c3f0ae5435f Drivers: vmbus: Check for channel allocation before looking up relids
8df93c8da532 gpio: GPIO_REGMAP: select REGMAP instead of depending on it
74347b99d4eb KVM: arm64: PMU: Don't save PMCR_EL0.{C,P} for the vCPU
3d8c8a9ad53e KVM: arm64: PMU: Sanitise PMCR_EL0.LP on first vcpu run
508d71a67708 KVM: arm64: PMU: Distinguish between 64bit counter and 64bit overflow
eb3df961021b KVM: arm64: PMU: Align chained counter implementation with architecture pseudocode
5d70c2e2f973 dm: fix improper splitting for abnormal bios
83ee6b272942 dm: change "unsigned" to "unsigned int"
32bde86816aa dm integrity: Remove bi_sector that's only used by commented debug code
6b1af0115f41 dm cache: Add some documentation to dm-cache-background-tracker.h
(From OE-Core rev: 441db89b1736e25416b84e56211381ef61e02ceb)
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Poky
Poky is an integration of various components to form a pre-packaged build system and development environment which is used as a development and validation tool by the Yocto Project. It features support for building customised embedded style device images and custom containers. There are reference demo images ranging from X11/GTK+ to Weston, commandline and more. The system supports cross-architecture application development using QEMU emulation and a standalone toolchain and SDK suitable for IDE integration.
Additional information on the specifics of hardware that Poky supports is available in README.hardware. Further hardware support can easily be added in the form of BSP layers which extend the systems capabilities in a modular way. Many layers are available and can be found through the layer index.
As an integration layer Poky consists of several upstream projects such as BitBake, OpenEmbedded-Core, Yocto documentation, the 'meta-yocto' layer which has configuration and hardware support components. These components are all part of the Yocto Project and OpenEmbedded ecosystems.
The Yocto Project has extensive documentation about the system including a reference manual which can be found at https://docs.yoctoproject.org/
OpenEmbedded is the build architecture used by Poky and the Yocto project. For information about OpenEmbedded, see the OpenEmbedded website.
Contribution Guidelines
The project works using a mailing list patch submission process. Patches should be sent to the mailing list for the repository the components originate from (see below). Throughout the Yocto Project, the README files in the component in question should detail where to send patches, who the maintainers are and where bugs should be reported.
A guide to submitting patches to OpenEmbedded is available at:
https://www.openembedded.org/wiki/How_to_submit_a_patch_to_OpenEmbedded
There is good documentation on how to write/format patches at:
https://www.openembedded.org/wiki/Commit_Patch_Message_Guidelines
Where to Send Patches
As Poky is an integration repository (built using a tool called combo-layer), patches against the various components should be sent to their respective upstreams:
OpenEmbedded-Core (files in meta/, meta-selftest/, meta-skeleton/, scripts/):
- Git repository: https://git.openembedded.org/openembedded-core/
- Mailing list: openembedded-core@lists.openembedded.org
BitBake (files in bitbake/):
- Git repository: https://git.openembedded.org/bitbake/
- Mailing list: bitbake-devel@lists.openembedded.org
Documentation (files in documentation/):
- Git repository: https://git.yoctoproject.org/cgit/cgit.cgi/yocto-docs/
- Mailing list: docs@lists.yoctoproject.org
meta-yocto (files in meta-poky/, meta-yocto-bsp/):
- Git repository: https://git.yoctoproject.org/cgit/cgit.cgi/meta-yocto
- Mailing list: poky@lists.yoctoproject.org
If in doubt, check the openembedded-core git repository for the content you intend to modify as most files are from there unless clearly one of the above categories. Before sending, be sure the patches apply cleanly to the current git repository branch in question.