d154173d48
shortlog of the changes follow: 356ccf6d2b0c Linux 4.8.12 f81c90012f2f scsi: mpt3sas: Unblock device after controller reset 3de3eebb10fd flow_dissect: call init_default_flow_dissectors() earlier 7838fbe25a95 mm, oom: stop pre-mature high-order OOM killer invocations 374ff835e2b6 can: bcm: fix support for CAN FD frames 7ed8d94b99b3 powerpc/boot: Fix the early OPAL console wrappers 7cbe9568fa04 powerpc/mm: Fixup kernel read only mapping 30988ea31783 powerpc: Set missing wakeup bit in LPCR on POWER9 8d248df485f2 device-dax: fail all private mapping attempts f87a483126b5 device-dax: check devm_nsio_enable() return value 5b08489eba14 xc2028: Fix use-after-free bug properly 9030deb21f29 X.509: Fix double free in x509_cert_parse() [ver #3] 0257b7e20c07 mpi: Fix NULL ptr dereference in mpi_powm() [ver #3] bdab996a7a9e mmc: sdhci-of-esdhc: fixup PRESENT_STATE read 0a80bef18a9f parisc: Also flush data TLB in flush_icache_page_asm 09e35a83cdc9 parisc: Fix race in pci-dma.c 3cb2bc6fdc54 parisc: Switch to generic sched_clock implementation 113b60efa37c parisc: Fix races in parisc_setup_cache_timing() b2f64572db2e thermal/powerclamp: add back module device table 6dfe1643b56a perf/x86/intel: Cure bogus unwind from PEBS entries 403f47ddbf6b perf/core: Fix address filter parser c5795c5f682d x86/traps: Ignore high word of regs->cs in early_fixup_exception() 885bad1e5f32 x86/fpu: Fix invalid FPU ptrace state after execve() 1a42cd56229b NFSv4.x: hide array-bounds warning 154c665b2b02 apparmor: fix change_hat not finding hat after policy replacement 9c15a98542f0 cfg80211: limit scan results cache size f204d21ee0b7 tile: avoid using clocksource_cyc2ns with absolute cycle count c707019bef62 scsi: mpt3sas: Fix secure erase premature termination b33387f6a68d Fix USB CB/CBI storage devices with CONFIG_VMAP_STACK=y 89a28f3a3c77 USB: serial: ftdi_sio: add support for TI CC3200 LaunchPad 6476f6530187 USB: serial: cp210x: add ID for the Zone DPMX 7445ffb75ed5 usb: chipidea: move the lock initialization to core file 32fe669c8634 KVM: x86: check for pic and ioapic presence before use c02d13809180 KVM: x86: fix out-of-bounds accesses of rtc_eoi map 39b653013527 KVM: x86: drop error recovery in em_jmp_far and em_ret_far 3c22c81377d4 KVM: x86: fix out-of-bounds access in lapic eb060c1a03f7 iommu/vt-d: Fix IOMMU lookup for SR-IOV Virtual Functions 8b23f16343f6 iommu/vt-d: Fix PASID table allocation 36bd5bfe4349 Linux 4.8.11 a9a0027757f8 gpio: pca953x: Fix corruption of other gpios in set_multiple. 88fce76cf590 gpio: pca953x: Move memcpy into mutex lock for set multiple 9a7b80894951 netfilter: nft_dynset: fix element timeout for HZ != 1000 fd4251fa4d09 IB/cm: Mark stale CM id's whenever the mad agent was unregistered 8ce92be782f8 IB/uverbs: Fix leak of XRC target QPs 160149299f71 IB/hfi1: Remove incorrect IS_ERR check 46e47543175b IB/core: Avoid unsigned int overflow in sg_alloc_table 82c377d05311 IB/mlx5: Fix NULL pointer dereference on debug print 554e4b69f1bb IB/mlx5: Fix fatal error dispatching 32091ee63d17 IB/mlx5: Fix memory leak in query device 21822a5bbddd IB/mlx5: Use cache line size to select CQE stride ad886a0e9035 IB/mlx5: Validate requested RQT size 76a93a6f8dd7 IB/mlx4: Fix create CQ error flow 4234e6a06f8b IB/mlx4: Check gid_index return value fc9275365065 IB/rxe: Clear queue buffer when modifying QP to reset 3c87b4a8f6d5 IB/rxe: Fix handling of erroneous WR c4605a0e9605 IB/rxe: Fix kernel panic in UDP tunnel with GRO and RX checksum 04d016249998 IB/rxe: Update qp state for user query bac1543b764c perf hists: Fix column length on --hierarchy 4cba876de64d PM / sleep: don't suspend parent when async child suspend_{noirq, late} fails 2e2c8f0e7502 PM / sleep: fix device reference leak in test_suspend fd669bf2a099 uwb: fix device reference leaks ab17baeaea91 sunrpc: svc_age_temp_xprts_now should not call setsockopt non-tcp transports 8c7ea73e3a9b mfd: core: Fix device reference leak in mfd_clone_cell 545ea4003db9 iwlwifi: mvm: wake the wait queue when the RX sync counter is zero 8bfaf856695b iwlwifi: mvm: fix d3_test with unified D0/D3 images 8cdfd32398b5 iwlwifi: mvm: fix netdetect starting/stopping for unified images 6e3324dc039c iwlwifi: pcie: mark command queue lock with separate lockdep class b822907865cc iwlwifi: pcie: fix SPLC structure parsing edb60ee4bc65 rtc: omap: Fix selecting external osc 5f95e68daae3 clk: imx: fix integer overflow in AV PLL round rate fec43900c9b7 clk: mmp: mmp2: fix return value check in mmp2_clk_init() 63465eaf7b2e clk: mmp: pxa168: fix return value check in pxa168_clk_init() a42bbd552ded clk: mmp: pxa910: fix return value check in pxa910_clk_init() bb6c9ec826be virtio-net: drop legacy features in virtio 1 mode 899f5426eebf drm/i915: Assume non-DP++ port if dvo_port is HDMI and there's no AUX ch specified in the VBT f6920e506992 drm/i915: Refresh that status of MST capable connectors in ->detect() 56a02a5f60ea drm/amdgpu: Attach exclusive fence to prime exported bo's. (v5) 3eac4767dd7e powerpc/64: Fix setting of AIL in hypervisor mode fc312878ffe3 crypto: caam - do not register AES-XTS mode on LP units 54f28973e8a5 ARM: dts: imx53-qsb: Fix regulator constraints 7001b98b9dce ext4: sanity check the block and cluster size at mount time 56df604296c2 kbuild: Steal gcc's pie from the very beginning e14754cb8f0c x86/kexec: add -fno-PIE ad4e2f324ade scripts/has-stack-protector: add -fno-PIE 1c7727d0bca0 kbuild: add -fno-PIE 20bcbe246933 Disable the __builtin_return_address() warning globally after all 504b60516ba7 i2c: i2c-mux-pca954x: fix deselect enabling for device-tree 45244660281c i2c: mux: fix up dependencies ce97f5012b6d ALSA: hda - Fix mic regression by ASRock mobo fixup 23e14ee1abcf ALSA: hda - add a new condition to check if it is thinkpad 85fcb62a58b2 ALSA: usb-audio: Fix use-after-free of usb_device at disconnect e902f10da218 gpio: do not double-check direction on sleeping chips b21b327d96bc can: bcm: fix warning in bcm_connect/proc_register 50e6cd2feff7 mfd: stmpe: Fix RESET regression on STMPE2401 e015527c6fbd mfd: intel-lpss: Do not put device in reset state on suspend 8b4d44f46bf2 IB/hfi1: Fix rnr_timer addition 06eac15f11e0 IB/rdmavt: rdmavt can handle non aligned page maps ca720a2b11b4 fuse: fix fuse_write_end() if zero bytes were copied de58c50e84e2 genirq: Use irq type from irqdata instead of irqdesc 8844024c8839 ftrace: Add more checks for FTRACE_FL_DISABLED in processing ip records c5d20ce0b459 ftrace: Ignore FTRACE_FL_DISABLED while walking dyn_ftrace records f271087fb2ea KVM: arm64: Fix the issues when guest PMCCFILTR is configured 8d8b37e242de arm64: KVM: pmu: Fix AArch32 cycle counter access 1cb9b2489e77 KVM: Disable irq while unregistering user notifier 23555ca21394 KVM: x86: fix missed SRCU usage in kvm_lapic_set_vapic_addr f8c74cf95655 x86/cpu/AMD: Fix cpu_llc_id for AMD Fam17h systems (From OE-Core rev: beb9adb4763a1bbed182503371921e676ccd4ae2) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Poky
Poky is an integration of various components to form a complete prepackaged build system and development environment. It features support for building customised embedded device style images. There are reference demo images featuring a X11/Matchbox/GTK themed UI called Sato. The system supports cross-architecture application development using QEMU emulation and a standalone toolchain and SDK with IDE integration.
Additional information on the specifics of hardware that Poky supports is available in README.hardware. Further hardware support can easily be added in the form of layers which extend the systems capabilities in a modular way.
As an integration layer Poky consists of several upstream projects such as BitBake, OpenEmbedded-Core, Yocto documentation and various sources of information e.g. for the hardware support. Poky is in turn a component of the Yocto Project.
The Yocto Project has extensive documentation about the system including a reference manual which can be found at: http://yoctoproject.org/documentation
OpenEmbedded-Core is a layer containing the core metadata for current versions of OpenEmbedded. It is distro-less (can build a functional image with DISTRO = "nodistro") and contains only emulated machine support.
For information about OpenEmbedded, see the OpenEmbedded website: http://www.openembedded.org/
Where to Send Patches
As Poky is an integration repository (built using a tool called combo-layer), patches against the various components should be sent to their respective upstreams:
bitbake: Git repository: http://git.openembedded.org/bitbake/ Mailing list: bitbake-devel@lists.openembedded.org
documentation: Git repository: http://git.yoctoproject.org/cgit/cgit.cgi/yocto-docs/ Mailing list: yocto@yoctoproject.org
meta-poky, meta-yocto-bsp: Git repository: http://git.yoctoproject.org/cgit/cgit.cgi/meta-yocto(-bsp) Mailing list: poky@yoctoproject.org
Everything else should be sent to the OpenEmbedded Core mailing list. If in doubt, check the oe-core git repository for the content you intend to modify. Before sending, be sure the patches apply cleanly to the current oe-core git repository.
Git repository: http://git.openembedded.org/openembedded-core/
Mailing list: openembedded-core@lists.openembedded.org
Note: The scripts directory should be treated with extra care as it is a mix of oe-core and poky-specific files.