Updating to the latest korg -stable release that comprises
the following commits:
3fbf24b73f4a Linux 5.15.38
151322c24e87 powerpc/64: Add UADDR64 relocation support
ec1bb681eee2 objtool: Fix type of reloc::addend
19ffee7d6231 objtool: Fix code relocs vs weak symbols
80c71d76e88a eeprom: at25: Use DMA safe buffers
7d0010f62840 perf symbol: Remove arch__symbols__fixup_end()
ea47db3bac7a tty: n_gsm: fix software flow control handling
ab49c23668ea tty: n_gsm: fix incorrect UA handling
e0a84ae1c662 tty: n_gsm: fix reset fifo race condition
f92783b7568e tty: n_gsm: fix missing tty wakeup in convergence layer type 2
aeacc7e81c71 tty: n_gsm: fix wrong signal octets encoding in MSC
ef2f08ee00b0 tty: n_gsm: fix wrong command frame length field encoding
e51f35470383 tty: n_gsm: fix wrong command retry handling
73defa00a7bc tty: n_gsm: fix missing explicit ldisc flush
2484787cde3d tty: n_gsm: fix wrong DLCI release order
0a7fe1a47ca5 tty: n_gsm: fix insufficient txframe size
87e1b4f90703 netfilter: nft_socket: only do sk lookups when indev is available
a93d2d3189e8 tty: n_gsm: fix malformed counter for out of frame data
0d6289c4a0e1 tty: n_gsm: fix wrong signal octet encoding in convergence layer type 2
4e1beef38c35 tty: n_gsm: fix mux cleanup after unregister tty device
8b19dfb3e817 tty: n_gsm: fix decoupled mux resource
7f71387d9f3b tty: n_gsm: fix restart handling via CLD command
a87a36badd94 perf symbol: Update symbols__fixup_end()
cf7bf78f10bd perf symbol: Pass is_kallsyms to symbols__fixup_end()
f858bd6536e1 x86/cpu: Load microcode during restore_processor_state()
2333d2a72ba1 ARM: dts: imx8mm-venice-gw{71xx,72xx,73xx}: fix OTG controller OC mode
0dc5cad09e32 ARM: dts: at91: sama7g5ek: enable pull-up on flexcom3 console lines
cf12ce1bd71d btrfs: fix leaked plug after failure syncing log on zoned filesystems
65b785cdb397 thermal: int340x: Fix attr.show callback prototype
f3106b0b0113 ACPI: processor: idle: Avoid falling back to C3 type C-states
d2bc6fc51e58 net: ethernet: stmmac: fix write to sgmii_adapter_base
4e308b21bc16 drm/i915: Fix SEL_FETCH_PLANE_*(PIPE_B+) register addresses
67434e132b8c drm/i915: Check EDID for HDR static metadata when choosing blc
891883c426b8 netfilter: Update ip6_route_me_harder to consider L3 domain
c63fbe063ffb mtd: rawnand: qcom: fix memory corruption that causes panic
30083f049204 kasan: prevent cpu_quarantine corruption when CPU offline and cache shrink occur at same time
051e78dc1f97 zonefs: Clear inode information flags on inode creation
534c3f29acdd zonefs: Fix management of open zones
746140625a0f Revert "ACPI: processor: idle: fix lockup regression on 32-bit ThinkPad T40"
2688d967ec65 selftest/vm: verify remap destination address in mremap_test
a17404fcbfd0 selftest/vm: verify mmap addr in mremap_test
c18b69393b4f powerpc/perf: Fix 32bit compile
9a90c13f72e7 drivers: net: hippi: Fix deadlock in rr_close()
3bb73c4cc265 cifs: destage any unwritten data to the server before calling copychunk_write
4640802e1cd4 x86: __memcpy_flushcache: fix wrong alignment if size > 2^32
5bf8eda3815a bonding: do not discard lowest hash bit for non layer3+4 hashing
d276bcc5f72e ksmbd: set fixed sector size to FS_SECTOR_SIZE_INFORMATION
df30cbfd3d8a ksmbd: increment reference count of parent fp
50f79a2abb65 arch: xtensa: platforms: Fix deadlock in rs_close()
52c3a04f9ec2 ext4: fix bug_on in start_this_handle during umount filesystem
dd2f7fcb2a43 ASoC: wm8731: Disable the regulator when probing fails
2c5ca9bde710 ASoC: Intel: soc-acpi: correct device endpoints for max98373
27e724bf7c51 tcp: fix F-RTO may not work correctly when receiving DSACK
8de15dad3c77 Revert "ibmvnic: Add ethtool private flag for driver-defined queue limits"
881c48b61fbb ixgbe: ensure IPsec VF<->PF compatibility
3bc7a1f85d5b perf arm-spe: Fix addresses of synthesized SPE events
3591293c19df gfs2: No short reads or writes upon glock contention
b5afb477d2f8 gfs2: Make sure not to return short direct writes
fe24959a79c9 gfs2: Minor retry logic cleanup
e4ea3286b1aa gfs2: Prevent endless loops in gfs2_file_buffered_write
a83ee2d81b34 net: fec: add missing of_node_put() in fec_enet_init_stop_mode()
925ebcac26e4 bnx2x: fix napi API usage sequence
87fe5a392d27 tls: Skip tls_append_frag on zero copy size
815b847af99d drm/amd/display: Fix memory leak in dcn21_clock_source_create
ce9be3baec9b drm/amdkfd: Fix GWS queue count
54e0b949bf59 netfilter: conntrack: fix udp offload timeout sysctl
37811e46a232 io_uring: check reserved fields for recv/recvmsg
79c10cb18815 io_uring: check reserved fields for send/sendmsg
ee6d708520b7 net: dsa: lantiq_gswip: Don't set GSWIP_MII_CFG_RMII_CLK
8a991ba5ddde drm/sun4i: Remove obsolete references to PHYS_OFFSET
ede22fc0bf7e net: dsa: mv88e6xxx: Fix port_hidden_wait to account for port_base_addr
9b649f4c5672 net: phy: marvell10g: fix return value on error
21bf1dc99db4 net: bcmgenet: hide status block before TX timestamping
abff341ac2f9 cpufreq: qcom-cpufreq-hw: Clear dcvs interrupts
7356c1f0ae47 clk: sunxi: sun9i-mmc: check return value after calling platform_get_resource()
409789e2cec5 bus: sunxi-rsb: Fix the return value of sunxi_rsb_device_create()
45b7fca32bbc tcp: make sure treq->af_specific is initialized
6c4d4334e573 tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWAT
6b59df7d4d0a ip_gre, ip6_gre: Fix race condition on o_seqno in collect_md mode
e5e985dd99d8 ip6_gre: Make o_seqno start from 0 in native mode
2dec240fb161 ip_gre: Make o_seqno start from 0 in native mode
479dc5d15316 net/smc: sync err code when tcp connection was refused
8c59a61ffb11 net: hns3: add return value for mailbox handling in PF
fc480b465ab6 net: hns3: add validity check for message data length
cfedc70d3c63 net: hns3: modify the return code of hclge_get_ring_chain_from_mbx
88c39408187c net: hns3: clear inited state and stop client after failed to register netdev
ac01adfa7d6d cpufreq: fix memory leak in sun50i_cpufreq_nvmem_probe
cdc350a76925 pinctrl: pistachio: fix use of irq_of_parse_and_map()
111827dfea31 arm64: dts: imx8mn-ddr4-evk: Describe the 32.768 kHz PMIC clock
a621f6ce1fb3 ARM: dts: imx6ull-colibri: fix vqmmc regulator
5a4da2e23351 sctp: check asoc strreset_chunk in sctp_generate_reconf_event
37a04788c573 wireguard: device: check for metadata_dst with skb_valid_dst()
d632cba7dee7 tcp: ensure to use the most recently sent skb when filling the rate sample
e9b1a51c3297 pinctrl: stm32: Keep pinctrl block clock enabled when LEVEL IRQ requested
eb90a4269c20 tcp: md5: incorrect tcp_header_len for incoming connections
eea166561f7c pinctrl: rockchip: fix RK3308 pinmux bits
86d8076e5971 bpf, lwt: Fix crash when using bpf_skb_set_tunnel_key() from bpf_xmit lwt hook
c2a69ac00b42 netfilter: nft_set_rbtree: overlap detection with element re-addition after deletion
9cc897ca03df net: dsa: Add missing of_node_put() in dsa_port_link_register_of
72e7940b00b5 memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual Mode
2075f6f8e627 pinctrl: stm32: Do not call stm32_gpio_get() for edge triggered IRQs in EOI
291ee6787b35 mtd: fix 'part' field data corruption in mtd_info
6465a2120b23 mtd: rawnand: Fix return value check of wait_for_completion_timeout
102775603cd9 pinctrl: mediatek: moore: Fix build error
d3dfa4954e35 phy: amlogic: fix error path in phy_g12a_usb3_pcie_probe()
b347b850a49f ipvs: correctly print the memory size of ip_vs_conn_tab
12d3fd4d8c49 ARM: dts: logicpd-som-lv: Fix wrong pinmuxing on OMAP35
6b4928990b14 ARM: dts: am3517-evm: Fix misc pinmuxing
6476c49e8e31 ARM: dts: Fix mmc order for omap3-gta04
4e81598e2122 interconnect: qcom: sdx55: Drop IP0 interconnects
344558d201bb phy: ti: Add missing pm_runtime_disable() in serdes_am654_probe
cf6f119f8244 phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probe
49c7d87f19d4 ARM: dts: at91: fix pinctrl phandles
7ecb2639eb8a ARM: dts: at91: sama5d4_xplained: fix pinctrl phandle name
1e68040245ad ARM: dts: at91: Map MCLK for wm8731 on at91sam9g20ek
555bcbb7d0ff phy: ti: omap-usb2: Fix error handling in omap_usb2_enable_clocks
d60abf246aa5 ARM: dts: dra7: Fix suspend warning for vpe powerdomain
127295f86f70 bus: ti-sysc: Make omap3 gpt12 quirk handling SoC specific
033cac39d0b7 ARM: OMAP2+: Fix refcount leak in omap_gic_of_init
a933ee691dbd phy: samsung: exynos5250-sata: fix missing device put in probe error paths
3c8a02347f84 phy: samsung: Fix missing of_node_put() in exynos_sata_phy_probe
bb0f3522cf42 arm64: dts: meson-sm1-bananapi-m5: fix wrong GPIO pin labeling for CON1
0f8e303faf88 arm64: dts: imx8mn: Fix SAI nodes
f1266c4eba8a ARM: dts: imx6qdl-apalis: Fix sgtl5000 detection issue
7596c4576a0e USB: Fix xhci event ring dequeue pointer ERDP update issue
11baa5edf37d arm64: dts: imx8qm: Correct SCU clock controller's compatible property
d84f8327af13 xsk: Fix l2fwd for copy mode + busy poll combo
3ec920d755ae mtd: rawnand: fix ecc parameters for mt7622
9e4dedb8ec72 iio:imu:bmi160: disable regulator in error path
d583cd6afc3b arm64: dts: meson: remove CPU opps below 1GHz for SM1 boards
9f878775fceb arm64: dts: meson: remove CPU opps below 1GHz for G12B boards
4df1584738f1 video: fbdev: udlfb: properly check endpoint type
1ad0832e8712 cpufreq: qcom-cpufreq-hw: Fix throttle frequency value on EPSS platforms
38ac9ca93252 cpufreq: qcom-hw: fix the race between LMH worker and cpuhp
08b036bac865 virtio_net: fix wrong buf address calculation when using xdp
10f24144ca48 iocost: don't reset the inuse weight of under-weighted debtors
559d4f45958b x86/pci/xen: Disable PCI/MSI[-X] masking for XEN_HVM guests
95ad6bef5bf1 riscv: patch_text: Fixup last cpu should be master
3437091fcc2f hex2bin: fix access beyond string end
4541645b5881 hex2bin: make the function hex_to_bin constant-time
41dee1832617 pinctrl: samsung: fix missing GPIOLIB on ARM64 Exynos config
8f2dac58b39e arm64: dts: imx8mm-venice: fix spi2 pin configuration
34b5d2aa355a bus: mhi: host: pci_generic: Flush recovery worker during freeze
b3d21deabcbe bus: mhi: host: pci_generic: Add missing poweroff() PM callback
732f861dd480 ceph: fix possible NULL pointer dereference for req->r_session
2b008197a06b arch_topology: Do not set llc_sibling if llc_id is invalid
03cab849da1a serial: 8250: Correct the clock for EndRun PTP/1588 PCIe device
9445505273a5 serial: 8250: Also set sticky MCR bits in console restoration
ac55cac5dcd4 serial: amba-pl011: do not time out prematurely when draining tx fifo
858d93280e83 serial: imx: fix overrun interrupts in DMA mode
c0ea202fbc85 usb: phy: generic: Get the vbus supply
dd2af3ad968f usb: cdns3: Fix issue for clear halt endpoint
455285db8717 usb: dwc3: pci: add support for the Intel Meteor Lake-P
0d1c407b1a74 usb: dwc3: gadget: Return proper request status
7d14c96bff09 usb: dwc3: core: Only handle soft-reset in DCTL
5d8299ead7c5 usb: dwc3: core: Fix tx/rx threshold settings
b81be940eaca usb: dwc3: Try usb-role-switch first in dwc3_drd_init
9f051e510cd2 usb: gadget: configfs: clear deactivation flag in configfs_composite_unbind()
f9b2660d9c10 usb: gadget: uvc: Fix crash when encoding data for usb request
e5e7d6c4b305 usb: typec: ucsi: Fix role swapping
3e5dd4cf30fe usb: typec: ucsi: Fix reuse of completion structure
6bf55f6b0ebf usb: core: Don't hold the device lock while sleeping in do_proc_control()
949d422949ee usb: misc: fix improper handling of refcount in uss720_probe()
a590353a9506 iio: imu: inv_icm42600: Fix I2C init possible nack
7619f3c498a2 iio: magnetometer: ak8975: Fix the error handling in ak8975_power_on()
28e1f974e3e7 iio: dac: ad5446: Fix read_raw not returning set value
cd266c38aaa4 iio: dac: ad5592r: Fix the missing return value.
48bc03979f30 xhci: increase usb U3 -> U0 link resume timeout from 100ms to 500ms
9faa311f65b0 xhci: stop polling roothubs after shutdown
10e0d30f99f4 xhci: Enable runtime PM on second Alderlake controller
576b40690e91 usb: xhci: tegra:Fix PM usage reference leak of tegra_xusb_unpowergate_partitions
4ebf2982db15 USB: serial: option: add Telit 0x1057, 0x1058, 0x1075 compositions
be94d697baab USB: serial: option: add support for Cinterion MV32-WA/MV32-WB
bb73ae98f086 USB: serial: cp210x: add PIDs for Kamstrup USB Meter Reader
f183708e8ecc USB: serial: whiteheat: fix heap overflow in WHITEHEAT_GET_DTR_RTS
7f8fc606893c USB: quirks: add STRING quirk for VCOM device
96a5999e1f62 USB: quirks: add a Realtek card reader
0da0ac894129 usb: mtu3: fix USB 3.0 dual-role-switch from device to host
(From OE-Core rev: 8017b8b05ad8c071f7fb56bfd8e983d9361b8c46)
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Poky
Poky is an integration of various components to form a pre-packaged build system and development environment which is used as a development and validation tool by the Yocto Project. It features support for building customised embedded style device images and custom containers. There are reference demo images ranging from X11/GTK+ to Weston, commandline and more. The system supports cross-architecture application development using QEMU emulation and a standalone toolchain and SDK suitable for IDE integration.
Additional information on the specifics of hardware that Poky supports is available in README.hardware. Further hardware support can easily be added in the form of BSP layers which extend the systems capabilities in a modular way. Many layers are available and can be found through the layer index.
As an integration layer Poky consists of several upstream projects such as BitBake, OpenEmbedded-Core, Yocto documentation, the 'meta-yocto' layer which has configuration and hardware support components. These components are all part of the Yocto Project and OpenEmbedded ecosystems.
The Yocto Project has extensive documentation about the system including a reference manual which can be found at https://docs.yoctoproject.org/
OpenEmbedded is the build architecture used by Poky and the Yocto project. For information about OpenEmbedded, see the OpenEmbedded website.
Contribution Guidelines
The project works using a mailing list patch submission process. Patches should be sent to the mailing list for the repository the components originate from (see below). Throughout the Yocto Project, the README files in the component in question should detail where to send patches, who the maintainers are and where bugs should be reported.
A guide to submitting patches to OpenEmbedded is available at:
https://www.openembedded.org/wiki/How_to_submit_a_patch_to_OpenEmbedded
There is good documentation on how to write/format patches at:
https://www.openembedded.org/wiki/Commit_Patch_Message_Guidelines
Where to Send Patches
As Poky is an integration repository (built using a tool called combo-layer), patches against the various components should be sent to their respective upstreams:
OpenEmbedded-Core (files in meta/, meta-selftest/, meta-skeleton/, scripts/):
- Git repository: https://git.openembedded.org/openembedded-core/
- Mailing list: openembedded-core@lists.openembedded.org
BitBake (files in bitbake/):
- Git repository: https://git.openembedded.org/bitbake/
- Mailing list: bitbake-devel@lists.openembedded.org
Documentation (files in documentation/):
- Git repository: https://git.yoctoproject.org/cgit/cgit.cgi/yocto-docs/
- Mailing list: docs@lists.yoctoproject.org
meta-yocto (files in meta-poky/, meta-yocto-bsp/):
- Git repository: https://git.yoctoproject.org/cgit/cgit.cgi/meta-yocto
- Mailing list: poky@lists.yoctoproject.org
If in doubt, check the openembedded-core git repository for the content you intend to modify as most files are from there unless clearly one of the above categories. Before sending, be sure the patches apply cleanly to the current git repository branch in question.