mirror of
https://git.yoctoproject.org/poky
synced 2026-04-21 21:32:12 +02:00
fdef1c9372
Updating linux-yocto/5.13 to the latest korg -stable release that comprises
the following commits:
25423f4bd9a9 Linux 5.13.5
c50bcc85a057 mt76: mt7921: continue to probe driver when fw already downloaded
c1b582a7e364 udp: properly flush normal packet at GRO time
e3104dccdd79 udp: annotate data races around unix_sk(sk)->gso_size
010f5d09fa32 firmware: arm_scmi: Avoid padding in sensor message structure
90ed7e5771ea drm/panel: nt35510: Do not fail if DSI read fails
fcd280d92bad perf test bpf: Free obj_buf
599148d40366 bpf: Track subprog poke descriptors correctly and fix use-after-free
4edc469e4a63 bpftool: Properly close va_list 'ap' by va_end() on error
a3b4cb28a2e8 tools: bpf: Fix error in 'make -C tools/ bpf_install'
e023c648a764 tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path
c0fea93d9f77 ipv6: tcp: drop silly ICMPv6 packet too big messages
fe77b85828ca tcp: fix tcp_init_transfer() to not reset icsk_ca_initialized
341dd0904d4f tcp: annotate data races around tp->mtu_info
108727841c25 tcp: consistently disable header prediction for mptcp
ed8c953ef967 ARM: dts: everest: Add phase corrections for eMMC
cc02a1bd5b7b ARM: dts: tacoma: Add phase corrections for eMMC
5cc4abeab14f ARM: dts: aspeed: Fix AST2600 machines line names
6f6f8f894a55 vboxsf: Add support for the atomic_open directory-inode op
53c4f60ed9dd vboxsf: Add vboxsf_[create|release]_sf_handle() helpers
6e64fd2f677f vboxsf: Make vboxsf_dir_create() return the handle for the created file
1f7cdb5def52 vboxsf: Honor excl flag to the dir-inode create op
753b33d387ec kbuild: do not suppress Kconfig prompts for silent build
19edcd97727a dma-buf/sync_file: Don't leak fences on merge failure
bdfbb51f7a43 net: fddi: fix UAF in fza_probe
d7243e2ab1c6 net: dsa: properly check for the bridge_leave methods in dsa_switch_bridge_leave()
a915379594f1 net: validate lwtstate->data before returning from skb_tunnel_info()
12917871d234 net: do not reuse skbuff allocated from skbuff_fclone_cache in the skb cache
d731dcbcefd2 net: send SYNACK packet with accepted fwmark
93efab0ef2a6 net: ti: fix UAF in tlan:remove_one
8a225a6e07a5 net: qcom/emac: fix UAF in emac:remove
aa92c87dc2d8 net: moxa: fix UAF in moxart_mac_probe
db3177b7ff0e net: ip_tunnel: fix mtu calculation for ETHER tunnel devices
02906fda9e7f net: bcmgenet: Ensure all TX/RX queues DMAs are disabled
fd51ccd9c971 net: netdevsim: use xso.real_dev instead of xso.dev in callback functions of struct xfrmdev_ops
c5e07e8c8ec8 net: marvell: always set skb_shared_info in mvneta_swbm_add_rx_fragment
3863428b04be net: bridge: sync fdb to new unicast-filtering ports
fda8adcbbc70 net/sched: act_ct: remove and free nf_table callbacks
c3eb534eae09 vmxnet3: fix cksum offload issues for tunnels with non-default udp ports
70a5a1950cca netfilter: nf_tables: Fix dereference of null pointer flow
c6eb7ce9f11c net/sched: act_ct: fix err check for nf_conntrack_confirm
a598091fc909 netfilter: ctnetlink: suspicious RCU usage in ctnetlink_dump_helpinfo
f6eaa0620312 net: ipv6: fix return value of ip6_skb_dst_mtu
231ea2169024 net: dsa: mv88e6xxx: enable SerDes PCS register dump via ethtool -d on Topaz
c57e63264dfb net: dsa: mv88e6xxx: enable SerDes RX stats for Topaz
8eef55a59620 net: dsa: mv88e6xxx: enable devlink ATU hash param for Topaz
0104c68efb3e net: dsa: mv88e6xxx: enable .rmu_disable() on Topaz
8263e5c08f46 net: dsa: mv88e6xxx: use correct .stats_set_histogram() on Topaz
36d57bbdf93f net: dsa: mv88e6xxx: enable .port_set_policy() on Topaz
c74ded51a37f net: bcmgenet: ensure EXT_ENERGY_DET_MASK is clear
8c4f51b15196 f2fs: Show casefolding support only when supported
ac1714556003 mm/userfaultfd: fix uffd-wp special cases for fork()
fd26ee0a1a82 mm/thp: simplify copying of huge zero page pmd when fork
b33e80b18a0a Revert "mm/shmem: fix shmem_swapin() race with swapoff"
58d7ce3934ae Revert "swap: fix do_swap_page() race with swapoff"
03c03b893661 arm64: dts: marvell: armada-37xx: move firmware node to generic dtsi file
cffb7390312e firmware: turris-mox-rwtm: add marvell,armada-3700-rwtm-firmware compatible string
ae3d181f4e91 cifs: prevent NULL deref in cifs_compose_mount_options()
c007614e78a1 s390: introduce proper type handling call_on_stack() macro
6ef3f584b593 s390/traps: do not test MONITOR CALL without CONFIG_BUG
09f1a8d85ec1 thermal/core/thermal_of: Stop zone device before unregistering it
505c12a1bd71 perf/x86/intel/uncore: Clean up error handling path of iio mapping
06d6142e1421 sched/fair: Fix CFS bandwidth hrtimer expiry type
8997002a88aa scsi: qedf: Add check to synchronize abort and flush
8511293e643a scsi: libfc: Fix array index out of bound exception
f661723909ad scsi: libsas: Add LUN number check in .slave_alloc callback
9015de5e72d0 scsi: aic7xxx: Fix unintentional sign extension issue on left shift of u8
1c033966a916 rtc: max77686: Do not enforce (incorrect) interrupt trigger type
2a04a3607548 arch/arm64/boot/dts/marvell: fix NAND partitioning scheme
26125ddc6904 kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set
4a7f9e9b24b9 arm64: dts: qcom: sm8150: Disable Adreno and modem by default
81c2374228cf arm64: dts: qcom: sm8250: Fix pcie2_lane unit address
9e159edfefb1 thermal/drivers/sprd: Add missing of_node_put for loop iteration
9a70f266994e thermal/drivers/imx_sc: Add missing of_node_put for loop iteration
82ad14246066 thermal/drivers/rcar_gen3_thermal: Do not shadow rcar_gen3_ths_tj_1
c3e1034bf7a2 thermal/core: Correct function name thermal_zone_device_unregister()
bbb41aa6ee41 arm64: dts: imx8: conn: fix enet clock setting
6d14b0e1cea1 arm64: dts: imx8mq: assign PCIe clocks
646b6021ff2e arm64: dts: imx8mn-beacon-som: Assign PMIC clock
5345699a5297 arm64: dts: ls208xa: remove bus-num from dspi node
cef210690a7a arm64: dts: rockchip: Update RK3399 PCI host bridge window to 32-bit address memory
ee3acd45dc45 firmware: tegra: bpmp: Fix Tegra234-only builds
ad36bf954334 soc/tegra: fuse: Fix Tegra234-only builds
7d9beefb89d0 ARM: OMAP2+: Block suspend for am3 and am4 if PM is not configured
72ea603ebc7f arm64: dts: qcom: sc7180: Add wakeup delay for adau codec
a38e8678f0ad ARM: dts: stm32: fix stpmic node for stm32mp1 boards
6ea5c31a9ff6 ARM: dts: stm32: Rename spi-flash/mx66l51235l@N to flash@N on DHCOM SoM
208d0b5c4fe8 ARM: dts: stm32: Rename eth@N to ethernet@N on DHCOM SoM
5ba5ec23b95d ARM: dts: stm32: Drop unused linux,wakeup from touchscreen node on DHCOM SoM
1ff4043818da ARM: dts: stm32: fix the Odyssey SoM eMMC VQMMC supply
d3ad6193b11b ARM: dts: stm32: fix ltdc pinctrl on microdev2.0-of7
45134048d407 ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15
c68df704e91f ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings
4d74e43113bc ARM: dts: rockchip: fix supply properties in io-domains nodes
b6824bc92923 arm64: dts: juno: Update SCPI nodes as per the YAML schema
6ddae8441dc2 i3c: master: svc: drop free_irq of devm_request_irq allocated irq
81cc76202847 ARM: dts: bcm283x: Fix up GPIO LED node names
97b95aa1abfc ARM: dts: bcm283x: Fix up MMC node names
668f66189026 ARM: dts: aspeed: Everest: Fix cable card PCA chips
9a92a6efb8e6 firmware: arm_scmi: Fix the build when CONFIG_MAILBOX is not selected
b9e7b8c0b9ef firmware: arm_scmi: Add SMCCC discovery dependency in Kconfig
8ec19b8b9c33 memory: tegra: Fix compilation warnings on 64bit platforms
bf6e424135e3 ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings
9e4183ab28b0 ARM: dts: stm32: fix RCC node name on stm32f429 MCU
5d36882a85f7 ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards
2a735d7a8167 ARM: dts: stm32: fix stm32mp157c-odyssey card detect pin
ea9312e7804e ARM: dts: stm32: Fix touchscreen node on dhcom-pdk2
39fb433494c2 ARM: dts: stm32: Remove extra size-cells on dhcom-pdk2
1dfe852260bd arm64: dts: qcom: sc7180: Move rmtfs memory region
58e1d4a68cb5 arm64: dts: qcom: sm8250: fix display nodes
638c3fc9774e arm64: dts: qcom: sm8350: fix the node unit addresses
3df317941718 ARM: tegra: nexus7: Correct 3v3 regulator GPIO of PM269 variant
94c054179d17 ARM: tegra: wm8903: Fix polarity of headphones-detection GPIO in device-trees
cf48dfa5aa26 arm64: dts: ti: k3-am654x/j721e/j7200-common-proc-board: Fix MCU_RGMII1_TXC direction
105f6beddcb8 arm64: tegra: Add PMU node for Tegra194
7ac85c09d5be ARM: dts: OMAP2+: Replace underscores in sub-mailbox node names
7752857c652f ARM: dts: am335x: fix ti,no-reset-on-init flag for gpios
7bfbec1bf56f ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpios
24df090958a3 ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios
1b45d9048ff4 kbuild: sink stdout from cmd for silent build
3e079812f469 arm64: dts: renesas: beacon: Fix USB ref clock references
27469bcc5b05 arm64: dts: renesas: beacon: Fix USB extal reference
b5f38dc8381c rtc: mxc_v2: add missing MODULE_DEVICE_TABLE
0c5b081a4d0a ARM: dts: ux500: Fix orientation of Janice accelerometer
15cd8eb0c2e6 ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE value
4f0520fad7d8 ARM: dts: ux500: Fix some compatible strings
b28ddd20572a ARM: dts: ux500: Fix orientation of accelerometer
7f1d0da1cc41 ARM: dts: ux500: Rename gpio-controller node
049ec888cd62 ARM: dts: ux500: Fix interrupt cells
ea98b9eb6862 arm64: dts: rockchip: fix regulator-gpio states array
9680f1e8f8b5 ARM: imx: pm-imx5: Fix references to imx5_cpu_suspend_info
9b3161825b24 ARM: dts: imx6: phyFLEX: Fix UART hardware flow control
f686c2ca9145 soc: mediatek: add missing MODULE_DEVICE_TABLE
556e5beac048 soc: bcm: brcmstb: remove unused variable 'brcmstb_machine_match'
3e3a7d2bf0d5 ARM: dts: BCM5301X: Fix pinmux subnodes names
d8428468f91a ARM: dts: Hurricane 2: Fix NAND nodes names
051500990321 ARM: dts: BCM63xx: Fix NAND nodes names
c477ee9b6402 ARM: NSP: dts: fix NAND nodes names
14a49e42f74c ARM: Cygnus: dts: fix NAND nodes names
12e303c937a2 ARM: brcmstb: dts: fix NAND nodes names
ca57a034e846 ARM: dts: BCM5301X: Fix NAND nodes names
ea49b15d27f0 reset: ti-syscon: fix to_ti_syscon_reset_data macro
ac00948749f1 arm64: dts: rockchip: Fix power-controller node names for rk3399
e2cc3578a628 arm64: dts: rockchip: Fix power-controller node names for rk3328
0ff2235f030a arm64: dts: rockchip: Fix power-controller node names for px30
5ada42440f49 ARM: dts: rockchip: Fix power-controller node names for rk3288
0151a90fc279 ARM: dts: rockchip: Fix power-controller node names for rk3188
af5ca9f83fad ARM: dts: rockchip: Fix power-controller node names for rk3066a
9015d0c9b072 ARM: dts: rockchip: Fix IOMMU nodes properties on rk322x
991661f15817 ARM: dts: rockchip: Fix the timer clocks order
670079df8659 arm64: dts: rockchip: fix pinctrl sleep nodename for rk3399.dtsi
5980cb81f165 arm64: dts: rockchip: Use only supported PCIe link speed on rk3399
68d1369daf96 ARM: dts: rockchip: fix pinctrl sleep nodename for rk3036-kylin and rk3288
deacb07e91be ARM: dts: rockchip: Fix thermal sensor cells o rk322x
f6e1fd15b3ee ARM: dts: gemini: add device_type on pci
6f9ba39547e2 ARM: dts: gemini: rename mdio to the right name
(From OE-Core rev: f7b13c570cbf5d92e265217641609808ef76860b)
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Poky
Poky is an integration of various components to form a pre-packaged build system and development environment which is used as a development and validation tool by the Yocto Project. It features support for building customised embedded style device images and custom containers. There are reference demo images ranging from X11/GTK+ to Weston, commandline and more. The system supports cross-architecture application development using QEMU emulation and a standalone toolchain and SDK suitable for IDE integration.
Additional information on the specifics of hardware that Poky supports is available in README.hardware. Further hardware support can easily be added in the form of BSP layers which extend the systems capabilities in a modular way. Many layers are available and can be found through the layer index.
As an integration layer Poky consists of several upstream projects such as BitBake, OpenEmbedded-Core, Yocto documentation, the 'meta-yocto' layer which has configuration and hardware support components. These components are all part of the Yocto Project and OpenEmbedded ecosystems.
The Yocto Project has extensive documentation about the system including a reference manual which can be found at https://docs.yoctoproject.org/
OpenEmbedded is the build architecture used by Poky and the Yocto project. For information about OpenEmbedded, see the OpenEmbedded website.
Contribution Guidelines
The project works using a mailing list patch submission process. Patches should be sent to the mailing list for the repository the components originate from (see below). Throughout the Yocto Project, the README files in the component in question should detail where to send patches, who the maintainers are and where bugs should be reported.
A guide to submitting patches to OpenEmbedded is available at:
http://www.openembedded.org/wiki/How_to_submit_a_patch_to_OpenEmbedded
There is good documentation on how to write/format patches at:
https://www.openembedded.org/wiki/Commit_Patch_Message_Guidelines
Where to Send Patches
As Poky is an integration repository (built using a tool called combo-layer), patches against the various components should be sent to their respective upstreams:
OpenEmbedded-Core (files in meta/, meta-selftest/, meta-skeleton/, scripts/):
- Git repository: https://git.openembedded.org/openembedded-core/
- Mailing list: openembedded-core@lists.openembedded.org
BitBake (files in bitbake/):
- Git repository: https://git.openembedded.org/bitbake/
- Mailing list: bitbake-devel@lists.openembedded.org
Documentation (files in documentation/):
- Git repository: https://git.yoctoproject.org/cgit/cgit.cgi/yocto-docs/
- Mailing list: docs@lists.yoctoproject.org
meta-yocto (files in meta-poky/, meta-yocto-bsp/):
- Git repository: http://git.yoctoproject.org/cgit/cgit.cgi/meta-yocto
- Mailing list: poky@lists.yoctoproject.org
If in doubt, check the openembedded-core git repository for the content you intend to modify as most files are from there unless clearly one of the above categories. Before sending, be sure the patches apply cleanly to the current git repository branch in question.