The current failure mode doesn't show us what the logs actually looked like
and later cleans can lose them. Show the whole log in case of failure
to aid debugging intermittent problems on the autobuilder.
(From OE-Core rev: 7c3a0dc5978cea898b1ca51decf4d6e7cf9d519f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This avoids problems where shutil.remove will error with:
File "/usr/lib/python3.5/shutil.py", line 436, in _rmtree_safe_fd
os.unlink(name, dir_fd=topfd)
FileNotFoundError: [Errno 2] No such file or directory: 'S.gpg-agent.extra'
when there are races over file deletion (gpg agent may be slow to exit).
We already worked around speed and race issues in bb.utils.
(From OE-Core rev: 00a8fd5b93a5c19ce0b7498e2bc653ce8ad58aaf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This should speed the test up signficiantly without any loss of functionality
for the purposes of the test.
(From OE-Core rev: 3dde0b749643575878bfbca2f8d2d9ec30bad166)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We ideally don't want to use gpg from the host. This is straightforward for package
management but not for sstate.
For sstate, create a second build directory to run the test in using gnupg-native
from the original build directory.
(From OE-Core rev: 10afa94c3f0d7eb7524a26deda86949073d55fde)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Raising an assertionError in the class setup isn't a particuarly good way to
indicate gpg isn't installed. Instead skip the tests if the required binary
isn't present. For the signing tests we do require it to be present and can't
use a prebuilt one.
(From OE-Core rev: 2d486af97e51b9daa9c40482c31d637c9ab4ae79)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When tmux is built from a non-release Git version, its version number is
"next-X" where X appears to be the expected version number for the next
release. For example, when built from the current state of master, running
"tmux -V" yields:
tmux next-2.9
Currently check_tmux_pane_size only checks for the version being less than
1.9, so it seems unfair to fail with an obscure Python error in this case.
Let's just use the version number after the "next-" prefix if it is
present.
(From OE-Core rev: 07b59afd52244410d8d833e6dfe262d952e5e344)
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enable qemu for slirp. Initialize Qemurunner with slirp. Setup ip
and port attribute to enable connection with qemu running with slirp.
[YOCTO#10713]
(From OE-Core rev: 815e05ac4abb42238d6fdeb15d7426759e059ce1)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enable qemurunner for slirp. Retrieved the ip & port from host machine
to connect to qemu from host machine.
[YOCTO#10713]
(From OE-Core rev: 1db6a6fc9cde28d0a29bcf6d24a8bfbe51d120b1)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Qemu do not use the ip input from external. It will
retrieve ip from QemuRunner instance and assign
ip value.
(From OE-Core rev: 14d99dc6c39c963ba3e0d9a30274846bd5369210)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Splits the SDK test implementation into configurable Python classes. The
classes used for the normal and extensible SDKs are
${TESTSDK_CLASS_NAME} and ${TESTSDKEXT_CLASS_NAME} respectively.
This allows SDK machines to override the classes used to implement the
tests. For the traditional SDK, a common "run()" function is provided by
the class (oeqa.sdk.testsdk.TestSDK), with several hook member functions
that can be overridden in child classes, making it easier to have
consistent behavior. The extensible SDK class
(oeqa.sdkext.testsdk.TestSDKEXT) also has a common "run()" function, but
no hooks have yet been added as there is not currently a known use case
for create derived classes.
These changes should be purely organizational; no functional changes
have been made to either the standard SDK or extensible SDK tests.
[YOCTO #13020]
(From OE-Core rev: a06d53928b22d5f88276023c4d57b206db2f27f9)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
testimage.bbclass installs a SIGTERM handler which conflicts with the
use of multiprocessing here. This is paritcularly problematic if the http
service is terminated before its started and hence before its had a chance
to reset the default signal handler (as the code was written).
Instead, temporarily remove testimage's handler whilst forking the http process
which means the correct handler is installed and won't deadlock.
Also take the opportunity to add in some log messages about the server start
and shutdown so that future debugging is easier and its clearer what the code
is doing.
(From OE-Core rev: 0762b6021b87ceb1f37952f3a6d64a36e99ae6a5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use our own lsb function instead as used elsewhere by the codebase.
(From OE-Core rev: acac45a6fd604d28ef7c23d67482af3d7e8bcfe3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Avoid an unclosed file per thread warning when running selftests concurrently
by closing the result stream.
(From OE-Core rev: 33a4a076e8aa72a872807332501e7f5ae1cee0e2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
list_pkgs() for rpm calls RpmPM() which would try and create a copy of the
package feed. This can be called for example from buildhistory whilst some
other task may be working on an SDK or image construction, causing the package
feed to disappear part way through an operation.
Avoid the need to copy the package index just to list the installed
packages, avoiding the race.
(From OE-Core rev: d05fa49e06034913e22c223803c98cb265e2ae58)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Avoid the warning:
meta/lib/oeqa/selftest/context.py:8: DeprecationWarning: the imp module is deprecated in favour of importlib; see the module's documentation for alternative uses
import imp
In this case importlib is a direct replacement.
(From OE-Core rev: db7a60c36a2d3eefc61ae6e1ede01680dc932035)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Clean up the warning:
meta/lib/oeqa/core/loader.py:27: DeprecationWarning: inspect.getargspec() is deprecated, use inspect.signature() or inspect.getfullargspec()
_failed_test_args = inspect.getargspec(unittest.loader._make_failed_test).args
(From OE-Core rev: d2deb66830be2d44532fea3d5db763b57778252a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We want to see failures/errors listed last since this is the most easily
visible part of the log on consoles or autobuilder output and makes
human processing easier rather than having to scroll up and scan for
a single failure.
(From OE-Core rev: 7954b19020c28a4120bc1671aa81b9e1e2b05fa2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its useful to have the counts of success/failure/error/skipped at the end of the
results to allow for easier human reading of what happened.
(From OE-Core rev: 080d8900d470a8e7f929b0c5c2765ad461744fbb)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With this it's possible to build locale data for ARC
and not do it instead on the first boot.
(From OE-Core rev: f13c303491dc8850126ea14baedc7b63b7b5ecf4)
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark up these tests as needing a compiler, make and kernel source code
as appropriate, the image feature requirements can then be retired.
(From OE-Core rev: 9f64e6c25abdf494fb511e9cd401f8dcaa08be2a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add the OEHasPackage decorator to a variety of tests so they determine
automatically if they should run against a given image.
To ensure tests can do this we need to move target operations such
as scp commands into the tests and out of the class startup/teardown.
(From OE-Core rev: 60d6580b85714b8960a964e775d76a7f937f5e5a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Usually skipped testcase output "SKIPPED"
[snip serial execution]
|RESULTS - buildgalculator.GalculatorTest.test_galculator - Testcase -1: SKIPPED (0.01s)
|RESULTS - python.PythonTest.test_python3 - Testcase -1: SKIPPED (0.01s)
[snip serial execution]
But if enable multiprocess execution, skipped testcase output "UNKNOWN" status
[snip enable multiprocess execution]
|RESULTS - buildgalculator.GalculatorTest.test_galculator - Testcase -1: UNKNOWN
|RESULTS - python.PythonTest.test_python3 - Testcase -1: UNKNOWN
[snip enable multiprocess execution]
Here is my investigation:
There is a class pairs TestProtocolClient and TestProtocolServer
provided by python3-subunit. The TestProtocolClient generates a
subunit stream of TestResult from a test run, and TestProtocolServer
parses the stream of subunit TestResult.
The class ProtocolTestCase is a unittest.TestCase adapter and it
uses TestProtocolServer to parse the stream of subunit TestResult.
In Yocto testsdk, it forks multiple processes to execute testcases
and use TestProtocolClient to generate TestResult stream; and then
it creates multiple threads to use ProtocolTestCase to parse stream
of subunit TestResult through pipe; finally it passes multiple
ProtocolTestCase as TestCase instance to main process and output
status result.
The problem point is TestProtocolServer parses `skip:' directive
after reading a `test:' directive. Without `test:' directive,
`skip:' directive will be ignored. All above requires SkipTest should
be raised inside a test method rather than setUpClass method.
Throwing SkipTest inside setUp works correctly
(From OE-Core rev: 4828a88556d59e4d06933164c2ebeb9361b7450e)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without doing this, the code can and sometimes does try and do "rm ~/"
which I think we'd all prefer it didn't.
(From OE-Core rev: 9dc1de59330c366783ea043c68c1b59b1b49e707)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We should only be wiping out things on target if the tests have
actually run.
(From OE-Core rev: d38c3eac0a5a1a9b0eb98385832e92f48145655e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We should not be finding GStreamer issues right around
release time but that's what we seem to do.
Port gstreamer tests from Intel Ref Kit.
https://github.com/intel/intel-iot-refkit/blob/master/meta-iotqa/
lib/oeqa/runtime/multimedia/gstreamer/gstreamer_cli.py
Add tests for gstreamer commandline tools (gst-inspect-1.0
& gst-launch-1.0).
[YOCTO #11418]
(From OE-Core rev: 3e77f845b517e3f4b3e7d09d088a9a80bf171653)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The upstream source tarball checksums changed. Use the copy from our source
mirror to avoid failures.
[YOCTO #12979]
(From OE-Core rev: e97a31e6bbaec5cb56d4750bf5171dbba510ee33)
Signed-off-by: Mohamad Noor Alim Hussin <mohamad.noor.alim.hussin@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having image-buildinfo enabled causes containerimage.ContainerImageTests.test_expected_files
to fail due to the presence of an unexpected file:
['./',
'./etc/',
- './etc/build',
'./etc/default/',
'./etc/default/postinst',
Tweak the class to allow it to be disabled and disable it from the test just in
case it was enabled.
(From OE-Core rev: af67bf422a4df5b7e07894512ff73a5f493682ab)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently sdk & sdkext will output json file to LOG_DIR, while
selftest will output json file to TOPDIR/log.
Standardize selftest json output file to LOG_DIR.
(From OE-Core rev: 2012d6b076fc833864a0254d56d78536314a6799)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We've had a number of occasions where the Yocto Project source mirrors have not
been complete or functioning correctly. This adds a test so that if this happens
we find out out it sooner.
It also only works over http meaning we should be able to test that anyone behind
an http only proxy (no git protocol) also has functional fetches for OE-Core and
layers built by the core of the project.
(From OE-Core rev: 9a25b2eb9cc13dd77a774dad83067ea5f9bf9716)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows the ptest results from ptest-runner, run in an image to be
transferred over to the resulting json results output.
Each test is given a pass/skip/fail so individual results can be monitored
and the raw log output from the ptest-runner is also dumped into the
results json file as this means after the fact debugging becomes much easier.
Currently the log output is not split up per test but that would make a good
future enhancement.
I attempted to implement this as python subTests however it failed as the
output was too confusing, subTests don't support any kind of log
output handling, subTest successes aren't logged and it was making things
far more complex than they needed to be.
We mark ptest-runner as "EXPECTEDFAILURE" since its unlikely every ptest
will pass currently and we don't want that to fail the whole image test run.
Its assumed there would be later analysis of the json output to determine
regressions. We do have to change the test runner code so that
'unexpectedsuccess' is not a failure.
Also, the test names are manipuated to remove spaces and brackets with
"_" used as a replacement and any duplicate occurrences truncated.
(From OE-Core rev: a13e088942e2a3c3521e98954a394e61a15234e8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The python git module may or may not be enabled, allow this code to
function without it, falling back to the same method as metadata_scm.bbclass
uses. This will be cleaned up in the next round of feature development.
(From OE-Core rev: 6350586ba9f4a4107a2d457590824cd4d662d5b9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no point in adding empty log entries to the json result files, only
add them if there is log data.
(From OE-Core rev: da6aef0b6bd4655805f7f743858d4e04341f75ed)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tweak the preceeding commit to:
* Add STARTTIME to the identifier to make it unique
* Use LOG_DIR
* Store the layer config in a more natural json format
* Drop '_' function prefixes
(From OE-Core rev: 173f59acf9722e2ef27fdd49c20f7d3d664917eb)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As part of the solution to replace Testopia to store testresult,
OEQA selftest need to output testresult into json files, where
these json testresult files will be stored into git repository
by the future test-case-management tools.
By default, json testresult file will be written to "oeqa"
directory under the oe-selftest log directory.
To configure multiple instances of bitbake to write json testresult
to a single testresult file at custom directory, user will define
the variable "OEQA_JSON_RESULT_DIR" with the custom directory for
json testresult.
(From OE-Core rev: 10697165c832e3dbb2913b6215164ea75e23ec23)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As part of the solution to replace Testopia to store testresult,
OEQA need to output testresult into single json file, where json
testresult file will be stored in git repository by the future
test-case-management tools.
The json testresult file will store more than one set of results,
where each set of results was uniquely identified by the result_id.
The result_id would be like "runtime-qemux86-core-image-sato", where
it was a runtime test with target machine equal to qemux86 and running
on core-image-sato image. The json testresult file will only store
the latest test content for a given result_id. The json testresult
file contains the configuration (eg. COMMIT, BRANCH, MACHINE, IMAGE),
result (eg. PASSED, FAILED, ERROR), test log, and result_id.
Based on the destination json testresult file directory provided,
it could have multiple instances of bitbake trying to write json
testresult to a single testresult file, using locking a lockfile
alongside the results file directory to prevent races.
Also the library class inside this patch will be reused by the future
test-case-management tools to write json testresult for manual test
case executed.
(From OE-Core rev: 00e03b5004f1eb6d59295544b3a8620504278f51)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After create_packages_dir added in below commit:
85e72e1 package_manager: Filter to only rpms we depend upon
When add below line into conf/local.conf
INHERIT += "packagefeed-stability"
There comes below error when do_rootfs
Exception: FileExistsError: [Errno 17] File exists: '/$Prj/tmp/deploy/rpm-prediff/i586/initscripts-1.0-r155.i586.rpm' -> '/$Prj/tmp/work/qemux86-poky-linux/core-image-minimal/1.0-r0/oe-rootfs-repo/rpm-prediff/i586/initscripts-1.0-r155.i586.rpm'
def create_packages_dir(d, subrepo_dir, deploydir, taskname, filterbydependencies):
[snip]
bb.utils.remove(subrepo_dir, recurse=True)
[snip]
In create_packages_dir function, there is a logic
as bb.utils.remove(subrepo_dir, recurse=True) to
clean subrepo_dir which is actually as example is
/$Prj/tmp/work/qemux86-poky-linux/core-image-minimal/1.0-r0/oe-rootfs-repo/rpm.
But currently when inherit packagefeed-stability class,
the deploydir should be /$Prj/tmp/deploy/rpm-prediff,
not the default /$Prj/tmp/deploy/rpm.
If use /$Prj/tmp/deploy/rpm, then result in the
logic as below:
os.link("/$Prj/tmp/deploy/rpm-prediff/i586/initscripts-1.0-r155.i586.rpm", "/$Prj/tmp/work/qemux86-poky-linux/core-image-minimal/1.0-r0/oe-rootfs-repo/rpm-prediff/i586/initscripts-1.0-r155.i586.rpm")
Update to the actual deploydir to guarantee the logic
as below:
os.link("/$Prj/tmp/deploy/rpm-prediff/i586/initscripts-1.0-r155.i586.rpm", "/$Prj/tmp/work/qemux86-poky-linux/core-image-minimal/1.0-r0/oe-rootfs-repo/rpm/i586/initscripts-1.0-r155.i586.rpm")
(From OE-Core rev: 3b17052611e640fb3db5d03c06ab87185a12be58)
Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oe-selftest's devtool tests have been broken since commit 2457cd57
(oe-selftest: devtool: avoid parallel races by using temporary copy of
core) if meta is a symbolic link.
(From OE-Core rev: daba6c5a991b370709d17e51305334f55a3858ec)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Refactor the original _getDetailsNotPassed method to return
testresult details (test status and log), which will be reused
by future OEQA code to write json testresult.
Take the opportunity to consolidate and simplify the logic used
to gather test status and log within the TestResult instance.
(From OE-Core rev: 79ee7d1c371a86edeb61c99679985118da657e5d)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If remove() is called with an empty package list, ensure we do nothing instead
of calling the underlying package manager with an invalid command line.
[ YOCTO #12900 ]
(From OE-Core rev: 715ec20c433cb4ed5fde938c33a42b2a296e4e56)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
opkg has supported the --add-exclude option to install since 0.3.0, so use it to
implement support for PACKAGE_EXCLUDE.
(From OE-Core rev: 6cc99d48c57cb22104980d0d758540e06cb7b80d)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Static libraries are not included in rootfs, it means, that sources are
not going into debug rootfs. This option enables to install additional
packages even if the standard package is not installed.
(From OE-Core rev: 708fe1df3d3e22dd693ae7bbfdd3e5af1a1b0bdc)
Signed-off-by: Andrej Valek <andrej.valek@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It appends TCLIBCAPPEND to TMPDIR in meta/conf/distro/defaultsetup.conf:
TMPDIR .= "${TCLIBCAPPEND}"
It affects some oe selftest cases in sstatetests.py. Reset TCLIBCAPPEND
for these cases.
(From OE-Core rev: 4549c9dd96be8db69d520f66f4507939df9e9587)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current error message is like:
kobject-example.kodoesn't exist
Add a space so that it looks like:
kobject-example.ko doesn't exist
(From OE-Core rev: 30f2cdd0a3ee0874bebd135e35ab591f630e8adc)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Building an image takes time and isn't necessary to test taskexp,
we can drop this step.
(From OE-Core rev: 298eb27037172925a83b37541e5955bbf3b7d2fb)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The autobuilder runs bitbake-selftest already so we don't need
to execute this manually.
(From OE-Core rev: f223f49b7e3d3f6ef07915edea1a6233ae9869e2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
