Add bison-native to DEPENDS of qemu and qemu-system-native to fix
compile warning:
| BISON dtc-parser.tab.c
| make[1]: bison: Command not found
(From OE-Core rev: ef2592eb898b494cf61f1e0614bdcaf94ec103d0)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
rpm5.org has been down for about a year now. Use linuxfromscratch.org
as an alternative reliable source instead.
(From OE-Core rev: d9224014da9a512b1b8837e4e7a736d465c97be3)
Signed-off-by: Oleksandr Kravchuk <open.source@oleksandr-kravchuk.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was in meta-oe but EFI is sufficiently widespread now that we need it in
core.
The recipe is based on the one in meta-oe but with several updates.
(From OE-Core rev: 275e5e7ecf4f79b7892ae35a47902188d9905bd0)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was in meta-oe but EFI is sufficiently wide spread now that we need it in
core.
The recipe is based on the one in meta-oe but with several updates.
(From OE-Core rev: 53fe0133432f62024850e87456292b044d1280ee)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* since this commit:
commit ad1db93d134db1ec4f6d6598c9741dc13e82e1f3
Author: Anuj Mittal <anuj.mittal@intel.com>
Date: Tue May 28 06:32:10 2019 +0800
Subject: Revert "pigz: pigz is not gzip"
pigz-native and nativesdk-pigz no longer installs pigz, unpigz, pigzcat,
so scripts explicitly depending on pigz-native and calling pigz started to fail.
* reverse the logic
- all the builds install pigz, unpigz, pigzcat
- only the native one installs it as gzip as well
* it could be optimized a bit more to create gzip as just a symlink
in native case as well, but they are in different directories
(pigz in base_bindir and gzip in bindir) and it's only 130kB..
(From OE-Core rev: 112deafd1c144d770b6ec0953911f2adc1cb30dd)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
this commit will permit to read the option from
/etc/default/rng-tools both from systemd and sysvinit unit file.
(From OE-Core rev: 16ced1a253c74c01ca414db2f1a010c083213b91)
Signed-off-by: Nicola Lunghi <nick83ola@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since UBOOT_DTB_BINARY empty means we don't need to inject signatures
into the U-Boot DTB, we can remove the dependencies between consumers of
these two classes and resolve a circular dependency between u-boot and
kernel.
(From OE-Core rev: c6b49cb75285e71909d1f9e4bf636f186941b519)
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
do_install_ptest in recipe is covered by default function
in ptest.bbclass since inherit ptest write in wrong place,
fix it by move it to top.
(From OE-Core rev: d4ad8d95c60830ac4bd988314cd865c32d1ec4e0)
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
MACHINE set to qemux86-64
for lib32-core-image-sato, during do_rootfs, it will run
install_complementary, which will get localedir by
d.getVar("libdir"), without override, libdir will still be
lib64. add override to fix it.
(From OE-Core rev: 8ed0cf040abbfb0999ac92b59ca9b7067d340202)
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The license files' names are changed, but the contents remain the
same. However, the LICENSE section of the recipe was wrong. This
upgrade change the 'BSD' part to 'BSD-3-Clause & BSD-4-Clause'.
(From OE-Core rev: 9bc68bcc79d9e2464b9b29f6bfde8322b65c09b9)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With meta-micro, ${prefix} is the empty string. This means that
CMAKE_INSTALL_BINDIR:PATH and friends end up containing paths starting with
many instances of "../", presumably due to os.path.relpath attempting to
find its way to the current directory.
Let's avoid this by ensuring that the root path always ends in a slash. If
it already ends in a slash then adding another one shouldn't cause any
problems.
(From OE-Core rev: 67b19414c1c17f71f39c971b9f9fdd1f776516a1)
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rebase 0003-Add-disable-opengl-configure-option.patch
and add another fix to it (g-introspection input file list assumes
opengl is always available).
(From OE-Core rev: e6ca80559f02a8a38272ae52c568053dde52ac9f)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove 0001-loaders.cache-depend-on-loaders-being-fully-build.patch
as upstream has fixed the issue.
Add a patch to revert upstream's decision to not cross-compile
thumbnailer or tests.
(From OE-Core rev: 0598f66aa823ec4355284a0a40c3d125d6c5e0c9)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
One bug went unnoticed without these selftests: an INCOMPATIBLE_LICENSE
with a non-SPDX license for a package with that non-SPDX license wasn't
enforcing the denial of build for said package. See
4b6ce4604c ("meta: license: fix non-SPDX
license being removed from INCOMPATIBLE_LICENSE")
While adding a test for that particular case, let's add a few more so
that we cover a handful more use cases of INCOMPATIBLE_LICENSE.
(From OE-Core rev: 6c2ca52218c196e7ccf6b3275bffc3e3a04193c6)
Signed-off-by: Quentin Schulz <quentin.schulz@streamunlimited.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Current QA team need to merge test result files from multiple sources.
Adding TESTSERIES configuration too early will have negative
implication to report and regression. Enable control to add TESTSERIES
when needed. Also enable adding EXECUTED_BY configuration when
needed.
(From OE-Core rev: 651d8d371e78e77599d56681228d5782664f7743)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Current results stored does not have information needed to trace who
executed the tests. Enable store to add EXECUTED_BY configuration
to results file in order to track who executed the tests.
(From OE-Core rev: dca2a57d54163a2e63b06e2f140fea3bd49cef0d)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Current resultutils library always add "TESTSERIES" configuration
to results. Enhance this to allow control of adding "TESTSERIES"
configuration as well as allow adding extra configurations
when needed.
(From OE-Core rev: 443c0acc14ef2451b10878fc83dd11b46805daf0)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch originally only meant to correct the python3 build for mips
with softfloat, as the original test only checked for mips hardfloat.
Replaced custom C Program for triplet detection with autotools triplet
detection.
(From OE-Core rev: 203336486c84528e8779db93f64cc28e4b372aab)
Signed-off-by: Matthias Schoepfer <matthias.schoepfer@ithinx.io>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have nose recipes for both Py2 and Py3, but they both want to ship the
unversioned nosetest binary. As Py2 is approaching EOL, remove the unversioned
binary from python-nose (leaving nosetest-2.7) instead of renaming the binary to
nosetest3 in python3-nose.
(From OE-Core rev: e22111a18a0f67fefd1800f67bd5e45637deaa60)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you have no BBMULTICONFIG set but set mcdepends, they're currently
ignored. We can handle them correctly with this small tweak.
(Bitbake rev: 578f0c02f6a13f4315e7c2ce8b5e876dd2025055)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A separate patch to base.bbclass (in poky) will add the OE_EXTRA_IMPORTS
variable. The contents are appended into OE_IMPORTS. This provides a
mechanism by which layers (in their layer.conf) can make custom progress
handlers available.
As a backup, individual recipes can inject progress handlers into
__builtins__.
Custom handlers are expected to have this __init__ signature:
def __init__(self, d, outfile=None, otherargs=None):
Recipes can then use the handlers like this:
do_task[progress] = "custom:mylayer.util.ProgressHandler[:args]"
The last part (everything after and including the second colon) is
optional. If provided, it is passed to HandlerClass's __init__ as
otherargs="args". Otherwise, otherargs=None.
(Bitbake rev: 20289d62c84c393990dd3deb0cca1b17c09092e6)
Signed-off-by: Chris Laplante <chris.laplante@agilent.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It seems context management support was half-implemented, but never
finished. For example, LogTee has __enter__ and __exit__ but they
haven't been exercised until now.
(Bitbake rev: bf522ad3e0c52cdb69b406226840d870ff4f2766)
Signed-off-by: Chris Laplante <chris.laplante@agilent.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The package 'make-mod-scripts' creates files in 'kernel-build-artifacts/include/config'
which are removed by 'cleanall/cleansstate' of 'virtual/kernel'. And this causes the
below error while building out of tree kernel module:
ERROR: Kernel configuration is invalid.
include/generated/autoconf.h or include/config/auto.conf are missing.
Run 'make oldconfig && make prepare' on kernel src to fix it.
Suggested-by: Jun Nie <jun.nie@linaro.org>
(From OE-Core rev: f79c95f6a883e999e0c2ecfd60b6b696b7595497)
Signed-off-by: Haiqing Bai <Haiqing.Bai@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The value of PACKAGE_EXTRA_ARCHS_tune-thunderx should be based on
PACKAGE_EXTRA_ARCHS_tune-armv8a-crc-crypto instead of armv8a-crc-crypto.
Otherwise we would get some sanity check error like this:
OE-core's config sanity checker detected a potential misconfiguration.
Either fix the cause of this error or at your own risk disable the checker (see sanity.conf).
Following is the list of potential problems / advisories:
Error, the PACKAGE_ARCHS variable (all any noarch armv8a-crc-crypto thunderx qemuarm64) for DEFAULTTUNE (thunderx) does not contain TUNE_PKGARCH (aarch64)
(From OE-Core rev: 13cc0f7c0bd98ea228e9bdf51043117d38837ce7)
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A non-SPDX license (which is not an alias to an SPDX license) cannot
currently be marked as incompatible in INCOMPATIBLE_LICENSE.
In the current state, we take all INCOMPATIBLE_LICENSE and pass them
through expand_wildcard_licenses which is only adding SPDX licenses that
match the glob regexp of what is in INCOMPATIBLE_LICENSE (be it a direct
match to an SPDX license or via an alias).
This does not work well with custom licenses.
E.g.:
foo.bb:
LICENSE = "FooLicense"
conf/local.conf:
INCOMPATIBLE_LICENSE = "FooLicense"
`bitbake foo`
Gives no warning, no error, builds and packages successfully, because
INCOMPATIBLE_LICENSE is basically empty since FooLicense is neither in
SPDXLICENSEMAP nor in SRC_DISTRIBUTE_LICENSES.
Let's add the original licenses to the list returned by
expand_wildcard_licenses to be able to handle the aforementioned case.
INCOMPATIBLE_LICENSE = "FooLicense GPLv2 GPLv3+" used to "resolve" to
"GPLv2 GPLv3". It now resolves to "FooLicense GPLv2 GPLv3 GPLv3+" which
fixes the issue with custom licenses not being in SPDXLICENSEMAP or
SRC_DISTRIBUTE_LICENSES and thus being left out of the blacklisted
licenses.
I needed to pass a list to expand_wildcard_licenses from the
license_image class instead of the current output of map() because the
operator [:] does not work on this kind of type, and list(map()) or
anything that iterates over map() actually moves the iterator and breaks
the forloop right after in expand_wildcard_licenses.
(From OE-Core rev: 2d976587d703462db2b7b78661b05ac22fb93787)
Signed-off-by: Quentin Schulz <quentin.schulz@streamunlimited.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
replaced hardcoded kernel image with KERNEL_IMAGETYPE.
set kernel image to "bzImage" incase KERNEL_IMAGETYPE not set.
(From OE-Core rev: 88a9fef761c5e67b2964fedc85a7e8ad37067564)
Signed-off-by: Chee Yang Lee <chee.yang.lee@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
icecc preprocesses source files locally before shipping them off to be compiled
on remote hosts. This preprocessing removes comments, including /* fallthough */
comments in switch statements that normally prevent an implicit-fallthrough
warning, see https://github.com/icecc/icecream/issues/419
Rather than turning off -Werror, the upstream project has implemented a
configure option, --disable-werror, in response to Ross's
https://github.com/json-c/json-c/issues/489
This patch from
21c886534f
Upstream-Status: Backport [Not yet released]
(From OE-Core rev: c668b467415599cb95d93a231eb51d77137a57e4)
Signed-off-by: Douglas Royds <douglas.royds@taitradio.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The action of "dhclient -x eth0" and "dhclient -r eth0" is
same when enable ENABLE_GENTLE_SHUTDOWN. Disable ENABLE_GENTLE_SHUTDOWN
that will use the default signal hander.
(From OE-Core rev: 8e5c85332f222efd5ffddaa9da9272c6e42881f5)
Signed-off-by: Jiping Ma <jiping.ma2@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As mentioned in upstream commit a2cf84afff,
"gstpythonplugin hardcodes the location of the libpython from the build
workspace and then fails at runtime."
In other words, PYTHON_LIB_LOC was set to the recipe-sysroot-native dir
in the gstreamer1.0-python workspace on the host. Overriding
PYTHON_LIB_LOC with /usr/lib by adding --with-libpython-dir=${libdir} to
EXTRA_OECONF to fix this issue.
The error that was seen is:
** (gst-plugin-scanner:2343): CRITICAL **: 23:08:18.327: Couldn't
g_module_open libpython. Reason: ${project}/build/tmp/work/${arch}/
gstreamer1.0-python/1.14.4-r0/recipe-sysroot-native/usr/lib/libpython3.5m.so:
cannot open shared object file: No such file or directory
The comment continues and says "it still fails because it looks for
a symlinked library ending in .so instead of the actually library with
LIBNAME.so.MAJOR.MINOR. Although we could patch the code to use the path
we want, it will break again if the library version ever changes."
This isn't the case anymore as the package is deploying
/usr/lib/gstreamer-1.0/libgstpython.cpython-37m-i386-linux-gnu.so, a
versionless so.
(From OE-Core rev: ac1d6d55e9cc647caf104e94465e32cf25647ad1)
Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com>
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add support for generating python3 recipes using the recipetool / devtool.
Drop python2 support at the same time.
Tested with:
oe-selftest -r recipetool.RecipetoolTest
[YOCTO #13264]
(From OE-Core rev: d8b2f58974482b3b1ccc65c5f93104d0d7ba87bc)
Signed-off-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wic images are handled as vmtype images. Starting qemu with "-kernel"
parameter and an image of type wic is not supported. Especially for
"-machine virt" the combination of wic with -kernel parameter would
be beneficial.
The new parameter QB_FSINFO allows to pass image type specific flags to
runqemu. QB_FSINFO is a space separated list of parameters. Parameters are
structured according to the following pattern: image-type:flag.
For now two parameters are supported:
- wic:no-kernel-in-fs
The wic image is treated as rootfs only image. A -kernel option is
passed to qemu.
- wic:kernel-in-fs
The wic image is treated as VM image including a bootloader and a
kernel. This is still the default behavior.
Example:
QB_DEFAULT_FSTYPE = "wic"
QB_FSINFO = "wic:no-kernel-in-fs"
QB_KERNEL_ROOT = "/dev/vda1"
QB_SYSTEM_NAME = "qemu-system-aarch64"
QB_MACHINE = "-machine virt"
...
[YOCTO #13336]
(From OE-Core rev: 2aa79a67affd22dfa37e4c2945c6ab0c86321f98)
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows "multiconfig:" targets to continue to work by internally
mapping them to the new "mc:" naming, allowing older builds to work
as before.
(Bitbake rev: c4d90890547af642e99cc541af3415df3559563e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After real world use its clear the "multiconfig:" prefix to multiconfig tasks,
whilst clear, is also clumbersome. Switch to use the short version instead.
mcdepends will continue to work with "multiconfig:" for now as well. The commandline
will only accept mc: going forward.
[YOCTO #11168]
(Bitbake rev: 821daf093b76504067a8b77dfa4b181af6ec92b4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adds an initial test for reproducible builds to the OE selftest. This
initial test builds core-image-minimal using sstate, then does a clean
build without sstate in another build directory, and finally does a
binary comparison of the resulting package files between the two builds.
The test is currently always skipped since it doesn't pass yet, but it
can easily be enabled locally
(From OE-Core rev: 2e591bdf93ec9e59b900562263dfe8e72b163baa)
Signed-off-by: Joshua Watt <JPEWHacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
OE_IMPORTS is not intended to be touched by users, but there are cases
in which layers might want to make additional Python modules available
to Python functions. For example, Python modules defined in the layer
themselves (under meta-layer/lib).
(From OE-Core rev: 00fa8391365863fa7805ad61b2d1a8425b9ea040)
Signed-off-by: Chris Laplante <chris.laplante@agilent.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
testimage.bbclass starts qemu with the first image type found in
the IMAGE_FSTYPES list. It's weird: this ['wic', 'tar'] works but
this ['tar'. 'wic'] does not. If QB_DEFAULT_FSTYPE is defined,
this fstype is booted.
(From OE-Core rev: aedb6bf9b6ccf37f69372642bc4c5dbbca92d0d9)
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While hacking on this I got an Exception. It's better to define
variables also in python.
Signe:-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
(From OE-Core rev: 1ea225a86cdee4ed932ede509d3351d5aecae497)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
