Updating to the latest korg -stable release that comprises
the following commits:
799441832db1 Linux 6.5.11
dd1756d79179 ASoC: SOF: sof-pci-dev: Fix community key quirk detection
aab16960e6e7 ALSA: hda: intel-dsp-config: Fix JSL Chromebook quirk detection
575d3966a7da serial: core: Fix runtime PM handling for pending tx
9f625a9ec6ad misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device support
fe3545fb7c39 dt-bindings: serial: rs485: Add rs485-rts-active-high
71a913eb5331 tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
7ffbf5db6963 tty: 8250: Add support for Intashield IX cards
8435b1f55760 tty: 8250: Add support for additional Brainboxes PX cards
21b8147a36f8 tty: 8250: Fix up PX-803/PX-857
98f984ff81de tty: 8250: Fix port count of PX-257
256a534427e9 tty: 8250: Add support for Intashield IS-100
933dde5b2082 tty: 8250: Add support for Brainboxes UP cards
a4a09f0ed3cd tty: 8250: Add support for additional Brainboxes UC cards
ca7f138b2c52 tty: 8250: Remove UC-257 and UC-431
19d34b73234a tty: n_gsm: fix race condition in status line change on dead connections
fd277724946d Bluetooth: hci_bcm4377: Mark bcm4378/bcm4387 as BROKEN_LE_CODED
885108988763 usb: raw-gadget: properly handle interrupted requests
9ee038590d80 usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm()
de5ac4d46304 usb: typec: tcpm: Add additional checks for contaminant
80105fc04b44 usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility
c99f302ea679 PCI: Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device
52d89332fbc6 ALSA: usb-audio: add quirk flag to enable native DSD for McIntosh devices
c75a5e421b07 mmap: fix error paths with dup_anon_vma()
578c20ab383f mmap: fix vma_iterator in error path of vma_merge()
cd91606eff46 perf evlist: Avoid frequency mode for the dummy event
65d457433a08 power: supply: core: Use blocking_notifier_call_chain to avoid RCU complaint
a58f5fabcab0 rust: types: make `Opaque` be `!Unpin`
7fba72536eb5 rust: make `UnsafeCell` the outer type in `Opaque`
07256dc046b1 drm/amd/display: Don't use fsleep for PSR exit waits
4ec5def87694 ceph_wait_on_conflict_unlink(): grab reference before dropping ->d_lock
fd652af1e1f9 io_uring: kiocb_done() should *not* trust ->ki_pos if ->{read,write}_iter() failed
fd318cc5b221 powerpc/mm: Fix boot crash with FLATMEM
c1d14ab7d666 r8152: Check for unplug in r8153b_ups_en() / r8153c_ups_en()
b233d39f7e15 r8152: Check for unplug in rtl_phy_patch_request()
19471af243b2 net: chelsio: cxgb4: add an error code check in t4_load_phy_fw
17002b8f2606 riscv: dts: thead: set dma-noncoherent to soc bus
9f0400d31e56 drm/amdgpu: Reserve fences for VM update
6ca3c25f5472 platform/mellanox: mlxbf-tmfifo: Fix a warning message
6cca6f997088 netfilter: nf_tables: audit log object reset once per table
99d311781fe5 LoongArch: Disable WUC for pgprot_writecombine() like ioremap_wc()
6b43fea5f245 LoongArch: Replace kmap_atomic() with kmap_local_page() in copy_user_highpage()
c86a4fbc2d5a LoongArch: Export symbol invalid_pud_table for modules building
74f9c03ecf79 LoongArch: Use SYM_CODE_* to annotate exception handlers
19fe554e5fcf gpu/drm: Eliminate DRM_SCHED_PRIORITY_UNSET
4ca54e8b459d drm/amdgpu: Unset context priority is now invalid
4debab37b1bc ASoC: da7219: Correct the process of setting up Gnd switch in AAD
22da32b45717 scsi: mpt3sas: Fix in error path
8377f82beacf fbdev: uvesafb: Call cn_del_callback() at the end of uvesafb_exit()
0a997e6eeee8 fbdev: omapfb: fix some error codes
93ff3297b04a drm/ttm: Reorder sys manager cleanup step
0074d0980bf8 s390/kasan: handle DCSS mapping in memory holes
652d60ecb7a5 ASoC: codecs: tas2780: Fix log of failed reset via I2C.
4dd62532e05c ASoC: rt5650: fix the wrong result of key button
ce5329ee79e5 efi: fix memory leak in krealloc failure handling
c76be4af694e x86/efistub: Don't try to print after ExitBootService()
5c4e4f31643d net/mlx5: Bridge, fix peer entry ageing in LAG mode
ead8d9a6b6ff netfilter: nfnetlink_log: silence bogus compiler warning
988ed1c96c42 ASoC: soc-dapm: Add helper for comparing widget name
c68a8c5b50b9 spi: npcm-fiu: Fix UMA reads when dummy.nbytes == 0
6777f23bca89 fs/ntfs3: Avoid possible memory leak
b9ec0e799a2d fs/ntfs3: Fix directory element type detection
0030ccd87a87 fs/ntfs3: Fix NULL pointer dereference on error in attr_allocate_frame()
3228a2e0e5a7 fs/ntfs3: Fix possible NULL-ptr-deref in ni_readpage_cmpr()
d408008a881a fs/ntfs3: Do not allow to change label if volume is read-only
da05aa786c20 fs/ntfs3: Add more info into /proc/fs/ntfs3/<dev>/volinfo
31baaf864b39 fs/ntfs3: Fix alternative boot searching
1d7dd485108d fs/ntfs3: Add more attributes checks in mi_enum_attr()
36ffca949ab2 fs/ntfs3: Use kvmalloc instead of kmalloc(... __GFP_NOWARN)
28ece3bd8596 fs/ntfs3: Write immediately updated ntfs state
8d3d7dbdbddd fs/ntfs3: Add ckeck in ni_update_parent()
78b4576f0e38 fbdev: atyfb: only use ioremap_uc() on i386 and ia64
83a28f46ed3c Input: synaptics-rmi4 - handle reset delay when using SMBus trsnsport
a18a7cc55c5b media: i2c: ov8858: Don't set fwnode in the driver
d4c3cb925e65 powerpc/85xx: Fix math emulation exception
0cae483a9c8e ata: pata_parport: fit3: implement IDE command set registers
e2fa6f732a73 ata: pata_parport: add custom version of wait_after_reset
142ac0fda553 dmaengine: ste_dma40: Fix PM disable depth imbalance in d40_probe
5976e4ed1405 irqchip/stm32-exti: add missing DT IRQ flag translation
b65f1eec2d8e irqchip/riscv-intc: Mark all INTC nodes as initialized
4b0dfa2fc745 can: flexcan: remove the auto stop mode for IMX93
4bd493ce8d74 arm64: dts: imx93: add the Flex-CAN stop mode by GPR
92705546718b net: sched: cls_u32: Fix allocation size in u32_init()
6f9195596a6f ASoC: tlv320adc3xxx: BUG: Correct micbias setting
31af9e3be3cd ASoC: core: Do not call link_exit() on uninitialized rtd objects
0716f52fa334 ASoC: fsl-asoc-card: use integer type for fll_id and pll_id
ac947c0992ef coresight: tmc-etr: Disable warnings for allocation failures
4dfa1e33d481 ASoC: simple-card: fixup asoc_simple_probe() error handling
8555438a0d87 ASoC: Intel: sof_sdw: add support for SKU 0B14
(From OE-Core rev: 0f56f12e7353f97855befb765ca8c0117736cb96)
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the following commit(s) to linux-yocto/.:
1/1 [
Author: Bruce Ashfield
Email: bruce.ashfield@gmail.com
Subject: debug: move PREEMPT_DEBUG to a runtime debug fragment
Date: Thu, 9 Nov 2023 12:08:31 -0500
For tools like spdx and debuggers to work with the kernel, we
require extra information. That is provided by the DEBUG_INFO
flags.
In that same fragment, some runtime debugging is being enabled
and that adds signficant overhead to the kernel.
Let's start a new runtime debug fragment with DEBUG_PREEMPT
and locking. We can add more to this in the future.
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
]
(From OE-Core rev: 8cd829de8e8770aa4a46e984f6ef2cab3194fd29)
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a new option -u/--update-recipe to update the recipe itself instead
of creating/updating a bbappend file
(From OE-Core rev: c9a80f55ed0bf9ce249205d6a9ba670fbb7f59ba)
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a new parameter update_original_recipe to allow to patch a recipe
instead of creating/updating a bbappend
(From OE-Core rev: 2f68ab2464bfad1b377df44a7b51203df59d66ce)
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
appendsrc function relies on oe.recipeutils.bbappend_recipe to
copy files and add the corresponding entries in SRC_URI.
Currently, appendsrc function build itself the new SRC_URI entry to add the
correct subdir param, and gives it using the extralines parameter.
This has 2 drawbacks:
- oe.recipeutils.bbappend_recipe can already do this if we specify the
correct params, so we have duplicate code
- the duplicated code is not fully functional: for example, it doesn't
take into account the -m/--machine parameter
So fix this by not using extralines but give correctly formatted params.
Also remove the check for already existing entries as
oe.recipeutils.bbappend_recipe already implement it
The new bbappend file now have the SRC_URI entry after the
FILESEXTRAPATHS so fix the selftest.
Update test_recipetool_appendsrcfile_existing_in_src_uri_diff_params
test because recipetool appendsrcfiles used to not add new src_uri entry
if the entry already exist even with different parameters while
oe.recipeutils.bbappend_recipe adds it if parameters are different (and
remove the old entry)
(From OE-Core rev: cd5de8d53849a6f3bb6f82e45fb301e39892c789)
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently we do not add a new src_ury entry if the entry already exists
AND the parameters are the same.
I believe that when an entry already exist with different parameters,
we should remove it and add the new entry otherwise we end up with two
entries with different parameters
(From OE-Core rev: a4628fffcfecb5cd95dc2558dfd39ebd71121eab)
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bbappend_recipe can take a dict of source files to add to SRC_URI where
the key is the full path to the file to be added and the value is a dict
Add a new optionnal entry "newname" to specify the name of the newly added file
(From OE-Core rev: e7bc09e5c9d7a0f4f8f4eba40730b68857b00677)
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the case get_bbappend_path returns None (could not find the layer
containing the recipe) the error message tries to print the recipefile,
but it is not defined. Fix it.
(From OE-Core rev: 234111fb67ffbcc5492cb0cd96db25ed8f5acea0)
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add dry-run mode for recipetool appendsrcfile and appendsrcfiles, with
if necessary, a diff of changes
(From OE-Core rev: 456c726e6b52f4dc57ff605e1cf1687097537002)
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using devtool to patch CRLF based sources creates patch files which have
mixed end of lines : LF for headers and CRLF for source context and
modified lines.
Python open(..., newline=None) (default for newline arg)does detect
end-of-line in this mixed file but only outputs LF EOL data. This
result in patch files that does not apply on the original sources.
Switching to open(..., newline='') allows to detect end-of-line but keep
the original end-of-line intact. This generate correct patches for CRLF
based sources.
Fixes [YOCTO #15285]
(From OE-Core rev: 58f845499c0277a2b8069eefa235430b5f5f7661)
Signed-off-by: Yoann Congal <yoann.congal@smile.fr>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
systemtap-uprobes package was not used for a long time - since kernel
itself provided uprobes support. Now source code of old uprobes kernel
module was removed from systemtap git repo by "PR30434 continuation:
Removed old uprobes, uprobes2 implementation, uprobes-inc.h & any
mentions of CONFIG_UTRACE." it is good time for us to gid rid of it
too.
(From OE-Core rev: 42fd5abedb835b6f87721674001c52304e43cfc5)
Signed-off-by: Victor Kamensky <victor.kamensky7@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Similar to 4.9 release, in 5.0 release release-5.0 tag is off any branch,
release-5.0a tag e72dc118e563c645d93a1a2d771e8d90e8fec1ae is on the master
branch. Use this value for SRCREV and add catch up patch,
0001-prerelease-datestamp-fixes.patch, to bring source up to release-5.0 tag
level. Remove 0001-prerelease-datestamp-fixes.patch in next upgrade.
(From OE-Core rev: 2d0cb9b21ccee93027fd12a51b74d3821cd03d2e)
Signed-off-by: Victor Kamensky <victor.kamensky7@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move the ignores from a huge dict in the parselogs.py module to .txt
files. This is just the common, tune, and qemu machine ignores; the
machine ignores that are not in oe-core will be added to the relevant
layers.
The list of ignores has not been reviewed in any meaningful way, this
should be done soon as I suspect a number of these are redundant.
(From OE-Core rev: bba243e1d18b954578afcdb3c727d8f687187ee8)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of hardcoding the list of ignored errors/warnings in the test
itself, read them plain text files on disk.
This uses importlib to try to open a file called
oeqa.runtime.cases.parselogs-ignores-[candidate].txt, where the
candidate will be:
- "common"
- The TARGET_ARCH
- Each of the MACHINEOVERRDES
This allows the common and tune-specific ignores to be retained in
oe-core, and machine-specific ignores added to the layer where the
machine is defined.
[ YOCTO #14604 ]
(From OE-Core rev: 7a04063f7cff243fe2bee09664ad7979612110cb)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
From NEWS:
Version 0.22.4 - November 2023
* Bug fixes:
- AM_GNU_GETTEXT now recognizes a statically built libintl on macOS and AIX.
- Build fixes on AIX.
(From OE-Core rev: 9add9e7b0da99b1530fcc12d3f8e6705a4af15fc)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Overview of changes for 1.8
==============================
* Build fixes
* Add current node accessor to JsonReader
* Make xgettext optional
* Avoid leaking memory in error paths
* Update test suite to conform with TAP
* Ensure valid output for exponential notation of numbers
* Translation updates
(From OE-Core rev: c4777f7b050c62f5d223f3deb4f3e07dc2e7975e)
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Overview of Changes in 4.12.4, 17-11-2023
=========================================
* a11y:
- Tweak name computation for some corner cases
* gdk:
- gl: Improve our use of GLES a bit (use vertex arrays and
GL_BGRA if available)
- Fix some errors in our memory format tables
* gsk:
- gl: handle texture-scale nodes more faithfully
- gl: Fix icon padding in the atlas
* Windows:
- Stop relying on glib for build configuration
* Tools:
- Add a --undecorated option to gtk4-rendernode-tool
* Translation updates
Catalan
French
Romanian
Russian
Spanish
Turkish
(From OE-Core rev: 1cf2c6992b1e16a253e519dfaa031a1c3166daf7)
Signed-off-by: Markus Volk <f_l_k@t-online.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adds features to explicitly write zeros to the start of the
partition. This is useful to overwrite old content like
filesystem signatures which may be re-recognized otherwise.
The new features can be enabled with
'--soucreparams="[fill|size=<N>[S|s|K|k|M|G]][,][bs=<N>[S|s|K|k|M|G]]"'
Conflicting or missing options throw errors.
The features are:
- fill
Fill the entire partition with zeros. Requires '--fixed-size' option
to be set.
- size=<N>[S|s|K|k|M|G]
Set the first N bytes of the partition to zero. Default unit is 'K'.
- bs=<N>[S|s|K|k|M|G]
Write at most N bytes at a time during source file creation.
Defaults to '1M'. Default unit is 'K'.
(From OE-Core rev: d19d4529e7a2056caeb526fed980cc1df19a5f6e)
Signed-off-by: Malte Schmidt <malte.schmidt@weidmueller.com>
Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Today, we can use devtool/recipetool to create recipes for python projects
using the github url or the direct release tarball of the project, but the
create_buildsys_python plugin doesn't support the pypi class, since we cannot
know from the extracted source if the package is available on pypi or not.
By implementing the new optional process_url callback, we can detect
that the url is a pypi one (i.e 'https://pypi.org/project/<package>')
and retrieve the release tarball location.
Also detect if the url points to a release tarball hosted on
"files.pythonhosted.iorg" (i.e https://files.pythonhosted.org/packages/...)
In both cases, adds the pypi class, remove 'S' and 'SRC_URIxxx'
variables from the created recipe as they will be handled by the pypi class
and add the PYPI_PACKAGE variable
This helps to produce cleaner recipes when package is hosted on pypi.
If the url points to a github url or a release tarball not coming from
"files.pythonhosted.org", the created recipe is the same as before.
One can also use the newly added "--no-pypi" switch to NOT inherit
from pypi class on matching url, to keep legacy behaviour.
To create a recipe for a pypi package, one can now use one of the
new following syntax (using recipetool create / devtool add):
* recipetool create https://pypi.org/project/<package>
* recipetool create https://pypi.org/project/<package>/<version>
* recipetool create https://pypi.org/project/<package> --version <version>
or the old syntax:
* recipetool create https://files.pythonhosted.org/packages/<...>
(From OE-Core rev: 097a43846cd99a7d74d004efc57f583ce78970a4)
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a new process_url callback that plugins can optionally implement if
they which to handle url.
Plugins can implement this callback for example, to:
* transform the url
* add special variables using extravalues
* add extra classes
* ...
If a plugin handles the url, it must append 'url' to the handled
list and must return the fetchuri
No functional changes expected for plugins non implementing this
optional callback
(From OE-Core rev: 3e5ce351e7dbe283562bf1db1f2ce3b121c49b53)
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
create_recipe() function relies on oe.recipeutils.patch_recipe_lines()
which relies on bb.utils.edit_metadata(). edit_metada expect lines to
have trailing newlines, so add it to each lines before calling
patch_recipe_lines, otherwise edit_metadata will not be able to squash
blank line if there are two consecutive blanks after a removal
(From OE-Core rev: 31b27cc76a1b669e2b126c332608fd772c124d69)
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the case pyproject.toml doesn't contains metadatas, the metadata
variable is not initialized and the plugin throws an error and falls back
to another plugin, which is not the desired behaviour. So just ignore
metadata if we don't have them
(From OE-Core rev: 88d15877ba18309c521740d7a9649e14d77189bc)
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the script assumes the variarables are dumped at the start of the
file which is hard to arrange safely in the bitbake code and no longer a true
assumption.
Rewrite the code so that it can cope with different ordering and event files
containing multiple builds.
(Bitbake rev: a833a403a8f7c05008108f3ec1710c211cfa9ec2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ensure the proper django settings are used by moving the variable to
the environment assignment.
Remove python file specifier as this works relative to the working
directory, which can vary. The test file directory can instead be
specified when executing the pytest command.
Add annotations required to allow database access with pytest to the
build tests.
(Bitbake rev: 7f4dfaa5bd28ccf1ae0122d984ffa7e02e693960)
Signed-off-by: Alexander Lussier-Cullen <alexander.lussier-cullen@savoirfairelinux.com>
CC: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Switch to using with blocks when accessing files to ensure file
descriptors are closed and avoid python warnings.
(Bitbake rev: e8574ee78eea23cc35900610bb15e47e40ef5ee1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update tests/browser/(test_landing_page.py and test_layerdetails_page.py)
to delay driver actions until for elements to appear
(Bitbake rev: 72908138bd2735c69f5e418ec5f0f2cf8215050a)
Signed-off-by: Alassane Yattara <alassane.yattara@savoirfairelinux.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- Bug-fix on table filtering on (CompletedOn, filter failed task)
- Better handle testcase used time.sleep and remove it
(Bitbake rev: 03a8657dd377f87be08dd149ec507d153cb10a07)
Signed-off-by: Alassane Yattara <alassane.yattara@savoirfairelinux.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The way the code currently handles dependencies between setscene tasks is fairly
poor, basically by deleting chunks of dependencies and adding reversed dependency
relationships.
This was once the best way to handle things but now a lot of the surrounding code
has changed and this approach is suboptimal and can be improved.
This change firstly adds debug logging for "hard" setscene task dependencies since
previously the codepaths were missing from logs making them very hard to read.
The changes to the setscene dependency graph are removed entirely this these altered
graphs were a significant source of problems. Instead, if a hard dependency is run
into, we mark the hard dependency as buildable and defer the task until the hard
dependencies are met.
The code now also skips the check_dependencies() code for hard dependencies since
previously that code was having to list all possible hard dependencies. We don't
need to do that as we can safely assume hard dependencies are required.
With these changes to runqueue's behaviour, we stand some chance of being able to
fix other bugs in OE-Core related to useradd for example.
(Bitbake rev: 367789b53c1c22ec26e0f4836cdf2bdd9c7d84fa)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change introduced a warning if version comparisons failed, but
this is far too common an issue in data that we don't control, so this
shouldn't cause a warning:
WARNING: automake-native-1.16.5-r0 do_cve_check: automake: Failed to compare 1.16.5 = branch_1-9 for CVE-2009-4029
WARNING: subversion-1.14.2-r0 do_cve_check: subversion: Failed to compare 1.14.2 = m1 for CVE-2010-4539
WARNING: subversion-1.14.2-r0 do_cve_check: subversion: Failed to compare 1.14.2 = m2 for CVE-2010-4539
WARNING: subversion-1.14.2-r0 do_cve_check: subversion: Failed to compare 1.14.2 = m3 for CVE-2010-4539
WARNING: subversion-1.14.2-r0 do_cve_check: subversion: Failed to compare 1.14.2 = m4\/m5 for CVE-2010-4539
WARNING: subversion-1.14.2-r0 do_cve_check: subversion: Failed to compare 1.14.2 = m1 for CVE-2010-4644
WARNING: subversion-1.14.2-r0 do_cve_check: subversion: Failed to compare 1.14.2 = m2 for CVE-2010-4644
WARNING: subversion-1.14.2-r0 do_cve_check: subversion: Failed to compare 1.14.2 = m3 for CVE-2010-4644
WARNING: subversion-1.14.2-r0 do_cve_check: subversion: Failed to compare 1.14.2 = m4\/m5 for CVE-2010-4644
WARNING: subversion-1.14.2-r0 do_cve_check: subversion: Failed to compare 1.14.2 = m1 for CVE-2011-0715
WARNING: subversion-1.14.2-r0 do_cve_check: subversion: Failed to compare 1.14.2 = m2 for CVE-2011-0715
WARNING: subversion-1.14.2-r0 do_cve_check: subversion: Failed to compare 1.14.2 = m3 for CVE-2011-0715
WARNING: subversion-1.14.2-r0 do_cve_check: subversion: Failed to compare 1.14.2 = m4\/m5 for CVE-2011-0715
WARNING: automake-1.16.5-r0 do_cve_check: automake: Failed to compare 1.16.5 = branch_1-9 for CVE-2009-4029
WARNING: mpg123-1.32.3-r0 do_cve_check: mpg123: Failed to compare 1.32.3 = pre0.59s for CVE-2003-0577
WARNING: mpg123-1.32.3-r0 do_cve_check: mpg123: Failed to compare 1.32.3 = pre0.59s for CVE-2004-0982
WARNING: mpg123-1.32.3-r0 do_cve_check: mpg123: Failed to compare 1.32.3 = pre0.59s for CVE-2004-1284
WARNING: mpg123-1.32.3-r0 do_cve_check: mpg123: Failed to compare 1.32.3 = pre0.59s_r11 for CVE-2006-3355
WARNING: mpg123-1.32.3-r0 do_cve_check: mpg123: Failed to compare 1.32.3 = pre0.59s for CVE-2007-0578
WARNING: mpg123-1.32.3-r0 do_cve_check: mpg123: Failed to compare 1.32.3 = pre0.59s_r11 for CVE-2007-0578
WARNING: mpg123-1.32.3-r0 do_cve_check: mpg123: Failed to compare 1.32.3 = pre0.59s for CVE-2009-1301
WARNING: mpg123-1.32.3-r0 do_cve_check: mpg123: Failed to compare 1.32.3 = pre0.59s_r11 for CVE-2009-1301
This reverts commit a1989e4197178c2431ceca499e0b4876b233b131.
(From OE-Core rev: c7c7dbdd5474002cfd9ec24864e77a0df2b790ea)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the sqlite database backend was restructured, the code to make the
databases run in WAL mode and to control if sync() is called was
accidentally dropped. This caused terrible database performance to the
point that server timeouts were occurring causing really slow builds.
Fix this by properly enabling WAL mode and setting the synchronous flag
as requested
(Bitbake rev: c5b8c91d325ed1ca8abe5fe28d989693555c0622)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
