When a recipe uses more than one source which isn't a plain file (for
example, multiple git repos), then do_ar_original created the source
archives using the same filename and thus only archived one source.
The "name" parameter is used as file suffix to create unique names for
each source, leading to archives following this pattern:
deploy/${TARGET_SYS}/${PF}/${PF}[-<name>].tar.gz.
The ${PF} part is a bit redundant, which may or may not be
desirable. The patch is more localized this way (no need to modify
create_tarball()).
For example, meta-oic's iotivity_1.1.1.bb uses:
url_iotivity = "git://github.com/iotivity/iotivity.git"
branch_iotivity = "1.1-rel"
SRC_URI = "${url_iotivity};destsuffix=${S};branch=${branch_iotivity};protocol=http;"
url_tinycbor = "git://github.com/01org/tinycbor.git"
SRC_URI += "${url_tinycbor};name=tinycbor;destsuffix=${S}/extlibs/tinycbor/tinycbor;protocol=http"
url_hippomocks = "git://github.com/dascandy/hippomocks.git"
SRC_URI += "${url_hippomocks};name=hippomocks;destsuffix=${S}/extlibs/hippomocks-master;protocol=http"
SRC_URI += "file://hippomocks_mips_patch"
url_gtest = "http://pkgs.fedoraproject.org/repo/pkgs/gtest/gtest-1.7.0.zip/2d6ec8ccdf5c46b05ba54a9fd1d130d7/gtest-1.7.0.zip"
SRC_URI += "${url_gtest};name=gtest;subdir=${BP}/extlibs/gtest"
url_sqlite = "http://www.sqlite.org/2015/sqlite-amalgamation-3081101.zip"
SRC_URI += "${url_sqlite};name=sqlite3;subdir=${BP}/extlibs/sqlite3;unpack=false"
These now get archived in deploy/sources/*/iotivity-1.1.1-r2/ as:
gtest-1.7.0.zip iotivity-1.1.1-r2-recipe.tar.gz sqlite-amalgamation-3081101.zip
hippomocks_mips_patch iotivity-1.1.1-r2.tar.gz
iotivity-1.1.1-r2-hippomocks.tar.gz iotivity-1.1.1-r2-tinycbor.tar.gz
(From OE-Core rev: 5c63ffc706c0fff8cfb797a238f4f0e73ee2813d)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Support for absolute paths in the "subdir" parameter was recently
added (bitbake rev: c3873346c6fa). The git fetcher has supported
absolute paths in "destsuffix" already before.
When the path is absolute as in destsuffix=${S}/foobar, the tmpdir
used by do_ar_original gets ignored, which breaks:
- source code archiving (tmpdir is empty)
- compilation due to race conditions (for example, ${S} getting
modified by do_ar_original while do_compile runs)
To solve this, these parameters get removed from URLs before
instantiating the fetcher for them.
This is done unconditionally also for relative paths, because these
paths are not useful when archiving the original source (upstream
source does not have them, they only get used by the recipe during
compilation).
(From OE-Core rev: c27c464e267db3f4b08cbd966412d19b0e756d28)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Added libs:
- container
- context
- coroutine
- exception
- graph_parallel
- locale
- math
- mpi
- wave
* Add PACKAGECONFIG to add proper dependencies for:
graph_parallel, locale, and mpi.
* boost-mpi depends on mpich which is in meta-oe,
and boost-graph_parallel depends on boost-mpi,
so they are disabled by default, but can be enabled
in a distro that needs them.
* context and coroutine are added only for x86 and powerpc.
(From OE-Core rev: a715a4ef10eed0ccffac1c38af89e16090d8159e)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A minor fix has been published regarding the need of a user
of being noticed when some run-ptest script fails.
Also Found modifications to ptest unit test stuff
* removed unnecessary code from unit test run_timeout_ptest
* added test case for run_ptest failure
Finally..
New content within contributions section of README.md.
[YOCTO #9752]
(From OE-Core rev: 94030ce3322b51d20c7d4a35381c053a4d765ae0)
Signed-off-by: Edwin Plauchu <edwin.plauchu.camacho@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When devtool creates a new workspace, it produced a README with one very
long line and no space following 'bblayers.conf'. Add a line break as was
intended.
(From OE-Core rev: 4ad1bcfc3c88ced5b7fc80c950613e31becb40f3)
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, prelink doesn't work unless base_libdir/libdir match
its hardcoded values. This patch manipulates those paths so that
they match the values set in the variables and handles multilib
configurations too. The manipulations only happen in the target
case, if needed.
[YOCTO #10282]
(From OE-Core rev: 6779990021530129a78eb73db122e3976f687c7e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its useful to be able to query a list of variables to obtain the values
in each multilib context. This adds such a function which works even
if called in the non-default recipe context.
(From OE-Core rev: 4202a09dece07c0d3f654c2b1ae504a031b4ee90)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bring across the comment that was in runqemu regarding why the
virtio-rng-pci device was needed. This comment is added to each location
where the virtio-rng-pci device is added.
(From OE-Core rev: bc5d1fdea674e842e4b0c45b38782930ec133051)
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds the new version of patchelf which resolves issues some users
were seeing with older versions.
(From OE-Core rev: c9fc6dbba5cb6193fa51538ab1d6a16d1376bea8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Expand TOOLCHAIN_CONFIGSITE_NOCACHE value immediately before inheriting
cross-canadian to avoid HOST_ARCH being changed from TARGET_ARCH to SDK_ARCH,
thus ensuring its correct value.
[YOCTO #10255]
(From OE-Core rev: 1e13d1fd22186af5544e7248dc12635cd2f2e08b)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The QEMU usermode fails with invalid instruction error when used with those tunes.
The issue is being tracked in [YOCTO: #10304].
(From OE-Core rev: f9fd1a7fdf03ade9735e137a526a54e723d03dc6)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are architectures which support running in 32 and 64 bit
flavours however the simulation is provided in a specific QEMU
setting, requiring us to use a different binary. This patch allow this
to be done using, for example:
QEMU_TARGET_BINARY_ppce5500 = "qemu-ppc64abi32"
(From OE-Core rev: 9b6d414fd27932ed1325de54e8e867c75b340e3d)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In a heavily loaded container, the child process might not started
before the parent process had terminated. The child process attempts to
signal the parent with SIGUSR1. If the parent had terminated, the
parent becomes PID 1, which is generally init. When it signaled pid 1,
it caused the docker mini-init to terminate.
This doesn't happen in a traditional system, as systemd/sysvinit is
protected to only root users can signal it.
[YOCTO #10324]
(From OE-Core rev: f6f13b049e8683d2a2af3e120ba979b58f9a7d9a)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If runqemu-ifup fails hen running testimage, a rather cryptic error
regarding "no tty present" is displayed. If this step fails, we
should at least point the user at runqemu-gen-tapdevs. A quick search
of this term in the manual will lead them to "Enabling Runtime Tests
on QEMU" which should give them all the info they need.
(From OE-Core rev: 3b6494fad2b8b65e0d52cda0cdf500e93c72823a)
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes:
* During install all files were recompiled -> redurced build time
* For some recipes we found lot of links to build host image path
(From OE-Core rev: 3d1d287785c388bebba2ba1f2d8f843a5c6a2417)
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Current release has relocations in .text on x86. Silence the
warning for now: Upcoming release should have a real fix.
[YOCTO #10290]
(From OE-Core rev: a55a20aea2128d777630a1c6d946f4434b18a227)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Preserving images for every partition doubles disk space
consumed by an image build. As those images are not used,
so it's better to remove them after assembling final image.
(From OE-Core rev: 51171b4aa10f2218c5e27d785ca7bf4f3949a4b4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"make alltests" is sensitive to the timestamps of the installed
files. Depending on the order in which cp copies files, .o and/or
executables may end up with time stamps older than the source files.
Running tests then triggers recompilation attempts, which typically
will fail because dev tools and files are not installed.
"cp -a" is not enough because the files also have to be newer than
the installed header files. Setting the file time stamps to
the current time explicitly after copying solves the problem because
do_install_ptest_base is guaranteed to run after do_install.
(From OE-Core rev: 101e2a5e0b7822ca3de3d3a73369405c05ab3c5b)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This update fixes several CVEs:
* OCSP Status Request extension unbounded memory growth (CVE-2016-6304)
* SWEET32 Mitigation (CVE-2016-2183)
* OOB write in MDC2_Update() (CVE-2016-6303)
* Malformed SHA512 ticket DoS (CVE-2016-6302)
* OOB write in BN_bn2dec() (CVE-2016-2182)
* OOB read in TS_OBJ_print_bio() (CVE-2016-2180)
* DTLS buffered message DoS (CVE-2016-2179)
* DTLS replay protection DoS (CVE-2016-2181)
* Certificate message OOB reads (CVE-2016-6306)
Of these, only CVE-2016-6304 is considered of high
severity. Everything else is low. CVE-2016-2177 and CVE-2016-2178 were
already fixed via local patches, which can be removed now.
See https://www.openssl.org/news/secadv/20160922.txt for details.
Some patches had to be refreshed and one compile error fix from
upstream's OpenSSL_1_0_2-stable was required. The server.pem
file is needed for test_dtls.
(From OE-Core rev: d6b69279b5d1370d9c4982d5b1842a471cfd2b0e)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes a following compiling issue:
| agent.c:33:19: fatal error: error.h: No such file or directory
| #include "error.h"
it's back-ported from lttng-tools upstream, we need it in SRC_URI
since 2.8 is still the latest release.
(From OE-Core rev: 08c9a363cc600cb58ab98cf22de0f7963720dea3)
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When PATCHTOOL = "git", if we need to manually apply a patch and then
commit it (i.e. when git am doesn't work) we try to extract the author /
date / shortlog from the patch header. Make the following improvements
to that extraction process:
* If there's no explicit Subject: but the first line is followed by a
blank line, isn't an Upstream-Status: or Index: marker and isn't too
long, then assume it's good enough to be the shortlog. This avoids
having too many patches with "Upgrade to version x.y" as the shortlog
(since that is often when patches get added).
* Add --follow to the command we use to find the commit that added the
patch, so we mostly get the commit that added the patch rather than
getting stuck on upgrade commits that last moved/renamed the patch
* Populate the date from the commit that added the patch if we were able
to get the author but not the date from the patch (otherwise you get
today's date which is less useful).
(From OE-Core rev: 896cfb10ec166a677cbb3b4f8643719cabeb7663)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you leave "From <hash>" lines in the commit message it can actually
break git rebase because it tries to interpret the line in the context
of the current repository, and if the hash is invalid then a rebase
will blow up with:
fatal: git cat-file: could not get object info
or in newer git versions:
error: unable to find <hash>
fatal: git cat-file <hash>: bad file
(I hit this when I tried to do a devtool upgrade on openssl to 1.0.2i
the first time I did "git rebase --skip")
(From OE-Core rev: 19a6b18ac23cb2d7bb89203f774b2bee7f0cb03c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These tools are relics of an earlier time when the Zaurus devices were
reference platforms - these days they are no longer needed. It seems
amazing that they survived earlier purges.
(From OE-Core rev: 49919585e5cec2999201fce8cb1b70f1cf7f591e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The code did "mv ${D}${base_libdir}/udev ${D}${nonarch_base_libdir}"
which is not needed any more, eudev can work with ${base_libdir}/udev.
(From OE-Core rev: 5e26b3df04716010b31b4c7ac0ac6b28982784f3)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It doesn't have files in udev dir, and bitbake.conf already sets it.
(From OE-Core rev: 10dbf13c86ce7f10ff84547fee8c4c5f15fe91fb)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Use "pkg-config --variable=udevdir udev" to fix udevdir, otherwise it
would use ${libdir}/udev which is incorrect for systemd's udev.
(From OE-Core rev: bcd93a4ad1188bb15db00727d5d03548d687a7a3)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It provides udev, but doesn't install udev.pc, which causes other
recipes failed to figure out udevdir.
Fixed when systemd in DISTRO_FEATURES:
$ bitbake pcmciautils (or btrfs-tools):
Package udev was not found in the pkg-config search path.
Perhaps you should add the directory containing `udev.pc'
to the PKG_CONFIG_PATH environment variable
No package 'udev' found
Their udev rules file may not be installed according to each pkg's
implementation.
(From OE-Core rev: a32dac24808bf8621fdbbecb654eff784acee47e)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* The eudev's udevdir can be ${base_libdir}/udev or ${libdir}/udev, it
doesn't have to be hardcoded to /lib/udev, so add them FILES_${PN}.
* Use /lib/udev rather than /lib/udev/rules.d for FILES_${PN} since
there might be files in /lib/udev except subdir rules.d
(From OE-Core rev: e1b81a80760fc79612254804e429cab5228b1ab6)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We still have problems where deploying SDKMACHINE=i686 can cause removal
of SDKMACHINE=x86_64 artefacts.
The reason is that x86_64 is a BUILD_ARCH as well as an SDK_ARCH and
the manifest namespaces overlap. To fix this, set PACKAGE_ARCH and
the stamp-extra-into to include SDK_OS. SDK_OS may not be entirely correct
but it is what sstate.bbclass uses for nativesdk and fixing that is
a separate issue.
This is confirmed to resolve artefact problems on the AB which have been
delaying a new uninative release.
(From OE-Core rev: 1dbc6ec4ca061570d2482c9abebcf720298db9b7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These notes can't be in the final version of the manual.
Now is the time to get them out.
(From yocto-docs rev: 600b4f2c7360b30d12fdc7ed0f5ba41bc09fc778)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10032]
The fix to remove the BitBake Commander from the tools to install
when dealing with the Eclipse Yocto Plug-in has happened.
Consequently, I removed the developer notes in the manual stating
that the Commander was still showing up there. The manual set
is now clean of this stuff.
(From yocto-docs rev: fbe169b086faac571de8a2ebd9d32682162cfd31)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10267]
The example works better using OECORE_TARGET_SYSROOT for the
aclocal line. I changed it to that.
(From yocto-docs rev: 362b786e7bf2083c5809e961f61c0ad81b778d71)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10248]
Provided more accurate descriptions for this variable and task.
(From yocto-docs rev: 422fa705165748230470fffc4fcc543ee38b1f2e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the devtool add and devtool modify flow diagrams and
supporting text to exactly match those from the SDK manual.
Also, updated the help output generated from the devtool --help
and devtool add --help commands.
(From yocto-docs rev: 002297a8ed3979f012fe228b7edb77514e7528a2)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
